API tools faq
paste
Guest User

za sodana <3

a guest
Oct 13th, 2011
93
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 28.03 KB | None | 0 0
raw download clone embed print report
  1. NIJE MI SVE STALO JA MISLIN DA IMA JOS GORE
  2.  
  3.  
  4.  
  5. [ 1.556327] uhci_hcd: USB Universal Host Controller Interface driver
  6. [ 1.556408] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
  7. [ 1.574465] serio: i8042 KBD port at 0x60,0x64 irq 1
  8. [ 1.574472] serio: i8042 AUX port at 0x60,0x64 irq 12
  9. [ 1.574581] mousedev: PS/2 mouse device common for all mice
  10. [ 1.575661] rtc_cmos 00:04: RTC can wake from S4
  11. [ 1.575821] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
  12. [ 1.575849] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
  13. [ 1.575941] device-mapper: uevent: version 1.0.3
  14. [ 1.576050] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: [email protected]
  15. [ 1.576177] device-mapper: multipath: version 1.2.0 loaded
  16. [ 1.576180] device-mapper: multipath round-robin: version 1.0.0 loaded
  17. [ 1.576256] EISA: Probing bus 0 at eisa.0
  18. [ 1.576258] EISA: Cannot allocate resource for mainboard
  19. [ 1.576261] Cannot allocate resource for EISA slot 1
  20. [ 1.576263] Cannot allocate resource for EISA slot 2
  21. [ 1.576264] Cannot allocate resource for EISA slot 3
  22. [ 1.576266] Cannot allocate resource for EISA slot 4
  23. [ 1.576268] Cannot allocate resource for EISA slot 5
  24. [ 1.576270] Cannot allocate resource for EISA slot 6
  25. [ 1.576272] Cannot allocate resource for EISA slot 7
  26. [ 1.576273] Cannot allocate resource for EISA slot 8
  27. [ 1.576275] EISA: Detected 0 cards.
  28. [ 1.576401] cpuidle: using governor ladder
  29. [ 1.576403] cpuidle: using governor menu
  30. [ 1.576665] TCP cubic registered
  31. [ 1.576786] NET: Registered protocol family 10
  32. [ 1.577330] NET: Registered protocol family 17
  33. [ 1.577348] Registering the dns_resolver key type
  34. [ 1.577419] powernow-k8: Found 1 AMD Athlon(tm) II P320 Dual-Core Processor (2 cpu cores) (version 2.20.00)
  35. [ 1.577460] powernow-k8: 0 : pstate 0 (2100 MHz)
  36. [ 1.577462] powernow-k8: 1 : pstate 1 (1500 MHz)
  37. [ 1.577464] powernow-k8: 2 : pstate 2 (800 MHz)
  38. [ 1.577616] Using IPI No-Shortcut mode
  39. [ 1.577707] PM: Hibernation image not present or could not be loaded.
  40. [ 1.577718] registered taskstats version 1
  41. [ 1.577954] Magic number: 15:652:232
  42. [ 1.578068] rtc_cmos 00:04: setting system clock to 2011-10-13 14:13:19 UTC (1318515199)
  43. [ 1.578071] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
  44. [ 1.578073] EDD information not available.
  45. [ 1.578189] Freeing unused kernel memory: 700k freed
  46. [ 1.578493] Write protecting the kernel text: 5192k
  47. [ 1.578536] Write protecting the kernel read-only data: 2148k
  48. [ 1.591519] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
  49. [ 1.600030] Refined TSC clocksource calibration: 2094.754 MHz.
  50. [ 1.600037] Switching to clocksource tsc
  51. [ 1.606126] <30>udev[63]: starting version 167
  52. [ 1.680090] usb 2-1: new high speed USB device using ehci_hcd and address 2
  53. [ 1.694852] scsi0 : pata_atiixp
  54. [ 1.696594] scsi1 : pata_atiixp
  55. [ 1.697277] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x7000 irq 14
  56. [ 1.697281] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x7008 irq 15
  57. [ 1.710349] tg3.c:v3.116 (December 3, 2010)
  58. [ 1.710369] tg3 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  59. [ 1.710378] tg3 0000:02:00.0: setting latency timer to 64
  60. [ 1.782208] tg3 mdio bus: probed
  61. [ 1.792019] tg3 0000:02:00.0: eth0: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address 70:5a:b6:e3:20:d6
  62. [ 1.792024] tg3 0000:02:00.0: eth0: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=200:01)
  63. [ 1.792028] tg3 0000:02:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
  64. [ 1.792032] tg3 0000:02:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
  65. [ 1.878314] ahci 0000:00:11.0: version 3.0
  66. [ 1.878342] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
  67. [ 1.878391] ahci 0000:00:11.0: irq 42 for MSI/MSI-X
  68. [ 1.878506] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
  69. [ 1.878511] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
  70. [ 1.879587] scsi2 : ahci
  71. [ 1.879760] scsi3 : ahci
  72. [ 1.879860] scsi4 : ahci
  73. [ 1.879934] scsi5 : ahci
  74. [ 1.880047] scsi6 : ahci
  75. [ 1.880119] scsi7 : ahci
  76. [ 1.880281] ata3: SATA max UDMA/133 abar m1024@0x92307000 port 0x92307100 irq 42
  77. [ 1.880286] ata4: SATA max UDMA/133 abar m1024@0x92307000 port 0x92307180 irq 42
  78. [ 1.880290] ata5: SATA max UDMA/133 abar m1024@0x92307000 port 0x92307200 irq 42
  79. [ 1.880294] ata6: SATA max UDMA/133 abar m1024@0x92307000 port 0x92307280 irq 42
  80. [ 1.880297] ata7: SATA max UDMA/133 abar m1024@0x92307000 port 0x92307300 irq 42
  81. [ 1.880301] ata8: SATA max UDMA/133 abar m1024@0x92307000 port 0x92307380 irq 42
  82. [ 2.200140] ata8: SATA link down (SStatus 0 SControl 300)
  83. [ 2.200175] ata6: SATA link down (SStatus 0 SControl 300)
  84. [ 2.200223] ata5: SATA link down (SStatus 0 SControl 300)
  85. [ 2.200250] ata7: SATA link down (SStatus 0 SControl 300)
  86. [ 2.372115] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  87. [ 2.372148] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  88. [ 2.373952] ata4.00: ATAPI: MATSHITADVD-RAM UJ890AS, 1.00, max UDMA/100
  89. [ 2.376778] ata4.00: configured for UDMA/100
  90. [ 2.427103] ata3.00: ATA-8: ST9250315AS, 0001SDM1, max UDMA/133
  91. [ 2.427107] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
  92. [ 2.429198] ata3.00: configured for UDMA/133
  93. [ 2.429427] scsi 2:0:0:0: Direct-Access ATA ST9250315AS 0001 PQ: 0 ANSI: 5
  94. [ 2.429635] sd 2:0:0:0: Attached scsi generic sg0 type 0
  95. [ 2.429716] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
  96. [ 2.429762] sd 2:0:0:0: [sda] Write Protect is off
  97. [ 2.429765] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
  98. [ 2.429785] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  99. [ 2.432750] scsi 3:0:0:0: CD-ROM MATSHITA DVD-RAM UJ890AS 1.00 PQ: 0 ANSI: 5
  100. [ 2.435974] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
  101. [ 2.435979] cdrom: Uniform CD-ROM driver Revision: 3.20
  102. [ 2.436142] sr 3:0:0:0: Attached scsi CD-ROM sr0
  103. [ 2.436217] sr 3:0:0:0: Attached scsi generic sg1 type 5
  104. [ 2.476112] sda: sda1 sda2 < sda5 >
  105. [ 2.476580] sd 2:0:0:0: [sda] Attached SCSI disk
  106. [ 2.816128] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
  107. [ 2.816133] EXT4-fs (sda1): write access will be enabled during recovery
  108. [ 10.662937] EXT4-fs (sda1): recovery complete
  109. [ 10.664932] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
  110. [ 23.457970] <30>udev[357]: starting version 167
  111. [ 23.472402] Adding 1827836k swap on /dev/sda5. Priority:-1 extents:1 across:1827836k
  112. [ 23.485219] lp: driver loaded but no devices found
  113. [ 23.596279] acpi device:02: registered as cooling_device2
  114. [ 23.596386] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input5
  115. [ 23.596483] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
  116. [ 23.793652] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
  117. [ 23.854177] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
  118. [ 23.855234] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
  119. [ 23.855400] SP5100 TCO timer: mmio address 0xb8fe00 already in use
  120. [ 23.856165] cfg80211: Calling CRDA to update world regulatory domain
  121. [ 23.992548] type=1400 audit(1318515221.911:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=581 comm="apparmor_parser"
  122. [ 23.992929] type=1400 audit(1318515221.911:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=581 comm="apparmor_parser"
  123. [ 23.993174] type=1400 audit(1318515221.911:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=581 comm="apparmor_parser"
  124. [ 23.995356] type=1400 audit(1318515221.911:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=587 comm="apparmor_parser"
  125. [ 23.995739] type=1400 audit(1318515221.911:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=587 comm="apparmor_parser"
  126. [ 23.995984] type=1400 audit(1318515221.911:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=587 comm="apparmor_parser"
  127. [ 24.052226] shpchp 0000:00:01.0: HPC vendor_id 1022 device_id 9602 ss_vid 1022 ss_did 9602
  128. [ 24.056724] shpchp 0000:00:01.0: Cannot reserve MMIO region
  129. [ 24.056823] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
  130. [ 24.129550] Linux video capture interface: v2.00
  131. [ 24.228977] uvcvideo: Found UVC 1.00 device 1.3M WebCam (064e:a219)
  132. [ 24.238396] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
  133. [ 24.238401] Disabling lock debugging due to kernel taint
  134. [ 24.249042] input: 1.3M WebCam as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1:1.0/input/input6
  135. [ 24.249237] usbcore: registered new interface driver uvcvideo
  136. [ 24.249239] USB Video Class driver (v1.0.0)
  137. [ 24.258999] tg3 0000:02:00.0: irq 43 for MSI/MSI-X
  138. [ 24.270323] ADDRCONF(NETDEV_UP): eth0: link is not ready
  139. [ 24.289861] type=1400 audit(1318515222.207:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=737 comm="apparmor_parser"
  140. [ 24.294863] type=1400 audit(1318515222.211:9): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=736 comm="apparmor_parser"
  141. [ 24.296545] acer-wmi: Acer Laptop ACPI-WMI Extras
  142. [ 24.297022] type=1400 audit(1318515222.215:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=737 comm="apparmor_parser"
  143. [ 24.297270] type=1400 audit(1318515222.215:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=737 comm="apparmor_parser"
  144. [ 24.332500] acer-wmi: Unable to detect available WMID devices
  145. [ 24.351398] cfg80211: World regulatory domain updated:
  146. [ 24.351403] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  147. [ 24.351407] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  148. [ 24.351410] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  149. [ 24.351413] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  150. [ 24.351415] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  151. [ 24.351418] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  152. [ 24.377033] ath9k 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
  153. [ 24.377044] ath9k 0000:08:00.0: setting latency timer to 64
  154. [ 24.440540] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  155. [ 24.440591] HDA Intel 0000:00:14.2: setting latency timer to 64
  156. [ 24.456883] [fglrx] Maximum main memory to use for locked dma buffers: 1639 MBytes.
  157. [ 24.456958] [fglrx] vendor: 1002 device: 9712 count: 1
  158. [ 24.457423] [fglrx] ioport: bar 1, base 0x6000, size: 0x100
  159. [ 24.457437] pci 0000:01:05.0: power state changed by ACPI to D0
  160. [ 24.457441] pci 0000:01:05.0: power state changed by ACPI to D0
  161. [ 24.457450] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  162. [ 24.457454] pci 0000:01:05.0: setting latency timer to 64
  163. [ 24.457887] [fglrx] Kernel PAT support is enabled
  164. [ 24.457908] [fglrx] module loaded - fglrx 8.84.60 [Mar 24 2011] with 1 minors
  165. [ 24.476210] hda-intel: Enable sync_write for AMD chipset
  166. [ 24.499034] hda_codec: ALC272X: BIOS auto-probing.
  167. [ 24.508964] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
  168. [ 24.509146] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
  169. [ 24.509449] HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
  170. [ 24.509529] HDA Intel 0000:01:05.1: setting latency timer to 64
  171. [ 24.524169] hda-intel: Enable sync_write for AMD chipset
  172. [ 24.811162] ath: EEPROM regdomain: 0x65
  173. [ 24.811166] ath: EEPROM indicates we should expect a direct regpair map
  174. [ 24.811170] ath: Country alpha2 being used: 00
  175. [ 24.811173] ath: Regpair used: 0x65
  176. [ 24.811177] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
  177. [ 24.811180] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
  178. [ 24.811182] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
  179. [ 24.811185] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
  180. [ 24.811187] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
  181. [ 24.811190] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
  182. [ 24.811192] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
  183. [ 24.811195] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
  184. [ 24.811197] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
  185. [ 24.811200] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
  186. [ 24.811202] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
  187. [ 24.811205] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
  188. [ 24.811207] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
  189. [ 24.811209] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
  190. [ 24.811212] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
  191. [ 24.811214] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
  192. [ 24.811216] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
  193. [ 24.811219] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
  194. [ 24.811221] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
  195. [ 24.811224] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
  196. [ 24.811226] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
  197. [ 24.811229] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
  198. [ 24.811231] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
  199. [ 24.811234] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
  200. [ 24.811236] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
  201. [ 24.811239] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
  202. [ 24.811241] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
  203. [ 24.811274] tg3 0000:02:00.0: eth0: Link is down
  204. [ 24.814526] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
  205. [ 24.820418] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
  206. [ 24.821214] Registered led device: ath9k-phy0::radio
  207. [ 24.821749] Registered led device: ath9k-phy0::assoc
  208. [ 24.821779] Registered led device: ath9k-phy0::tx
  209. [ 24.821799] Registered led device: ath9k-phy0::rx
  210. [ 24.821806] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xf8860000, irq=17
  211. [ 24.866584] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  212. [ 25.124489] vesafb: framebuffer at 0x80000000, mapped to 0xf9600000, using 3072k, total 3072k
  213. [ 25.124494] vesafb: mode is 1024x768x32, linelength=4096, pages=0
  214. [ 25.124497] vesafb: scrolling: redraw
  215. [ 25.124500] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
  216. [ 25.124688] Console: switching to colour frame buffer device 128x48
  217. [ 25.124716] fb0: VESA VGA frame buffer device
  218. [ 25.194425] ppdev: user-space parallel port driver
  219. [ 25.819399] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
  220. [ 25.844217] [fglrx] ATIF platform detected with notification ID: 0x81
  221. [ 25.896285] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
  222. [ 26.026107] [fglrx] GART Table is not in FRAME_BUFFER range
  223. [ 26.026299] [fglrx] Could not enable MSI; System prevented initialization
  224. [ 26.026930] [fglrx] Firegl kernel thread PID: 1198
  225. [ 26.026988] [fglrx] Firegl kernel thread PID: 1199
  226. [ 26.027085] [fglrx] Firegl kernel thread PID: 1200
  227. [ 26.027408] [fglrx] IRQ 18 Enabled
  228. [ 26.583530] [fglrx] Gart USWC size:548 M.
  229. [ 26.583534] [fglrx] Gart cacheable size:215 M.
  230. [ 26.583540] [fglrx] Reserved FB block: Shared offset:0, size:1000000
  231. [ 26.583543] [fglrx] Reserved FB block: Unshared offset:fffb000, size:5000
  232. [ 28.936396] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
  233. [ 30.796863] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
  234. [ 32.769669] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
  235. [ 42.136077] usb 2-2: new high speed USB device using ehci_hcd and address 3
  236. [ 42.357980] wlan0: authenticate with 00:90:d0:f6:1a:ce (try 1)
  237. [ 42.362386] wlan0: authenticated
  238. [ 42.362416] wlan0: associate with 00:90:d0:f6:1a:ce (try 1)
  239. [ 42.366405] wlan0: RX AssocResp from 00:90:d0:f6:1a:ce (capab=0x411 status=0 aid=1)
  240. [ 42.366410] wlan0: associated
  241. [ 42.366870] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  242. [ 42.554666] usbcore: registered new interface driver uas
  243. [ 42.583716] Initializing USB Mass Storage driver...
  244. [ 42.583876] scsi8 : usb-storage 2-2:1.0
  245. [ 42.583975] usbcore: registered new interface driver usb-storage
  246. [ 42.583977] USB Mass Storage support registered.
  247. [ 43.586625] scsi 8:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
  248. [ 43.591196] sd 8:0:0:0: Attached scsi generic sg2 type 0
  249. [ 50.094828] sd 8:0:0:0: [sdb] Attached SCSI removable disk
  250. [ 52.608047] wlan0: no IPv6 routers present
  251. [ 53.476152] usb 2-2: USB disconnect, address 3
  252. [ 90.404924] NET: Registered protocol family 24
  253. [ 91.041359] ip_tables: (C) 2000-2006 Netfilter Core Team
  254. [ 4682.273751] tg3 0000:02:00.0: PME# enabled
  255. [ 4682.273767] pcieport 0000:00:04.0: wake-up capability enabled by ACPI
  256. [ 4682.491592] wlan0: deauthenticating from 00:90:d0:f6:1a:ce by local choice (reason=3)
  257. [ 4682.525696] cfg80211: All devices are disconnected, going to restore regulatory settings
  258. [ 4682.525709] cfg80211: Restoring regulatory settings
  259. [ 4682.525728] cfg80211: Calling CRDA to update world regulatory domain
  260. [ 4682.537302] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
  261. [ 4682.537316] cfg80211: World regulatory domain updated:
  262. [ 4682.537321] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  263. [ 4682.537331] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  264. [ 4682.537339] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  265. [ 4682.537347] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  266. [ 4682.537354] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  267. [ 4682.537361] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  268. [ 4684.234098] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
  269. [ 4686.817557] PM: Syncing filesystems ... done.
  270. [ 4686.819816] PM: Preparing system for mem sleep
  271. [ 4686.819829] Freezing user space processes ... (elapsed 0.01 seconds) done.
  272. [ 4686.836137] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  273. [ 4686.852135] PM: Entering mem sleep
  274. [ 4686.852331] Suspending console(s) (use no_console_suspend to debug)
  275. [ 4686.852708] sd 2:0:0:0: [sda] Synchronizing SCSI cache
  276. [ 4686.932692] ohci_hcd 0000:00:14.5: PCI INT C disabled
  277. [ 4686.932709] [fglrx] IRQ 18 Disabled
  278. [ 4686.932795] [fglrx] Preparing suspend fglrx in kernel.
  279. [ 4686.933603] ehci_hcd 0000:00:13.2: PCI INT B disabled
  280. [ 4686.933673] ehci_hcd 0000:00:12.2: PCI INT B disabled
  281. [ 4686.933681] ohci_hcd 0000:00:12.0: PCI INT A disabled
  282. [ 4686.933693] ohci_hcd 0000:00:13.0: PCI INT A disabled
  283. [ 4686.962224] [fglrx] Suspending fglrx in kernel completed.
  284. [ 4686.962229] [fglrx] Power down the ASIC .
  285. [ 4686.962257] fglrx_pci 0000:01:05.0: PCI INT A disabled
  286. [ 4686.964648] sd 2:0:0:0: [sda] Stopping disk
  287. [ 4687.036125] HDA Intel 0000:01:05.1: PCI INT B disabled
  288. [ 4687.036141] ACPI handle has no context!
  289. [ 4687.037447] HDA Intel 0000:00:14.2: PCI INT A disabled
  290. [ 4687.052102] PM: suspend of drv:HDA Intel dev:0000:01:05.1 complete after 119.556 msecs
  291. [ 4687.052123] PM: suspend of drv:HDA Intel dev:0000:00:14.2 complete after 119.418 msecs
  292. [ 4687.052147] PM: suspend of drv:pci dev:0000:00:01.0 complete after 118.436 msecs
  293. [ 4687.352606] PM: suspend of drv:sd dev:2:0:0:0 complete after 499.899 msecs
  294. [ 4687.352656] PM: suspend of drv:scsi dev:target2:0:0 complete after 499.916 msecs
  295. [ 4687.352674] PM: suspend of drv:scsi dev:host2 complete after 499.861 msecs
  296. [ 4687.352887] PM: suspend of drv:ahci dev:0000:00:11.0 complete after 419.199 msecs
  297. [ 4687.352915] PM: suspend of drv: dev:pci0000:00 complete after 419.176 msecs
  298. [ 4687.352924] PM: suspend of devices complete after 500.364 msecs
  299. [ 4687.352928] PM: suspend devices took 0.500 seconds
  300. [ 4687.400205] PM: late suspend of devices complete after 47.268 msecs
  301. [ 4687.400255] ACPI: Preparing to enter system sleep state S3
  302. [ 4687.440211] PM: Saving platform NVS memory
  303. [ 4687.452115] Disabling non-boot CPUs ...
  304. [ 4687.452472] Broke affinity for irq 18
  305. [ 4687.556119] CPU 1 is now offline
  306. [ 4687.556386] Back to C!
  307. [ 4687.556386] PM: Restoring platform NVS memory
  308. [ 4687.556386] Enabling non-boot CPUs ...
  309. [ 4687.556386] Booting Node 0 Processor 1 APIC 0x1
  310. [ 4687.453488] Initializing CPU#1
  311. [ 4687.453488] Switch to broadcast mode on CPU1
  312. [ 4687.664482] CPU1 is up
  313. [ 4687.665984] ACPI: Waking up from system sleep state S3
  314. [ 4687.666247] pci 0000:00:01.0: restoring config space at offset 0x7 (was 0x2206161, writing 0x22206161)
  315. [ 4687.666267] pcieport 0000:00:04.0: restoring config space at offset 0x7 (was 0x20005121, writing 0x5121)
  316. [ 4687.666272] pcieport 0000:00:04.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10010)
  317. [ 4687.666276] pcieport 0000:00:04.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
  318. [ 4687.666304] pcieport 0000:00:05.0: restoring config space at offset 0x7 (was 0x1f1, writing 0x200001f1)
  319. [ 4687.666308] pcieport 0000:00:05.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10010)
  320. [ 4687.666312] pcieport 0000:00:05.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
  321. [ 4687.666354] ahci 0000:00:11.0: restoring config space at offset 0x1 (was 0x2300003, writing 0x2300407)
  322. [ 4687.668124] Switched to NOHz mode on CPU #1
  323. [ 4687.680129] ehci_hcd 0000:00:12.2: BAR 0: set to [mem 0x92307500-0x923075ff] (PCI address [0x92307500-0x923075ff])
  324. [ 4687.680160] ehci_hcd 0000:00:12.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013)
  325. [ 4687.696112] ehci_hcd 0000:00:13.2: BAR 0: set to [mem 0x92307400-0x923074ff] (PCI address [0x92307400-0x923074ff])
  326. [ 4687.696142] ehci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013)
  327. [ 4687.696356] HDA Intel 0000:01:05.1: restoring config space at offset 0x3 (was 0x800000, writing 0x800010)
  328. [ 4687.696360] HDA Intel 0000:01:05.1: restoring config space at offset 0x1 (was 0x100007, writing 0x100003)
  329. [ 4687.696610] PM: early resume of devices complete after 30.425 msecs
  330. [ 4687.696828] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  331. [ 4687.696854] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
  332. [ 4687.696944] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  333. [ 4687.696958] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
  334. [ 4687.696981] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  335. [ 4687.697017] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  336. [ 4687.697052] fglrx_pci 0000:01:05.0: power state changed by ACPI to D0
  337. [ 4687.697056] fglrx_pci 0000:01:05.0: power state changed by ACPI to D0
  338. [ 4687.697061] fglrx_pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  339. [ 4687.697064] fglrx_pci 0000:01:05.0: setting latency timer to 64
  340. [ 4687.697546] HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
  341. [ 4687.697550] HDA Intel 0000:01:05.1: setting latency timer to 64
  342. [ 4687.697574] pcieport 0000:00:04.0: wake-up capability disabled by ACPI
  343. [ 4687.697584] tg3 0000:02:00.0: PME# disabled
  344. [ 4687.700365] [fglrx] Power up the ASIC
  345. [ 4687.700391] [fglrx] Preparing resume fglrx in kernel.
  346. [ 4687.714122] sd 2:0:0:0: [sda] Starting disk
  347. [ 4687.732032] [fglrx] Resuming fglrx in kernel completed.
  348. [ 4687.732236] [fglrx] IRQ 18 Enabled
  349. [ 4688.024140] ata7: SATA link down (SStatus 0 SControl 300)
  350. [ 4688.024174] ata6: SATA link down (SStatus 0 SControl 300)
  351. [ 4688.024203] ata5: SATA link down (SStatus 0 SControl 300)
  352. [ 4688.024247] ata8: SATA link down (SStatus 0 SControl 300)
  353. [ 4688.196101] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  354. [ 4688.203730] ata4.00: configured for UDMA/100
  355. [ 4689.208115] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  356. [ 4689.240186] PM: resume of drv:battery dev:PNP0C0A:00 complete after 1543.382 msecs
  357. [ 4689.248643] ata3.00: configured for UDMA/133
  358. [ 4689.317861] PM: resume of drv:sd dev:2:0:0:0 complete after 1603.734 msecs
  359. [ 4689.317908] PM: resume of drv:scsi_device dev:2:0:0:0 complete after 1603.742 msecs
  360. [ 4691.253120] tg3 0000:02:00.0: eth0: Link is down
  361. [ 4692.932099] usb 2-1: reset high speed USB device using ehci_hcd and address 2
  362. [ 4693.102698] PM: resume of drv:usb dev:2-1 complete after 5388.649 msecs
  363. [ 4693.102740] PM: resume of drv: dev:ep_00 complete after 5388.642 msecs
  364. [ 4693.102747] PM: resume of drv:uvcvideo dev:2-1:1.0 complete after 5388.683 msecs
  365. [ 4693.102752] PM: resume of drv:uvcvideo dev:2-1:1.1 complete after 5388.667 msecs
  366. [ 4693.102768] PM: resume of drv:video4linux dev:video0 complete after 3784.822 msecs
  367. [ 4693.102771] PM: resume of drv: dev:ep_83 complete after 5388.697 msecs
  368. [ 4693.106229] PM: resume of devices complete after 5409.552 msecs
  369. [ 4693.106399] PM: resume devices took 5.408 seconds
  370. [ 4693.106426] PM: Finishing wakeup.
  371. [ 4693.106428] Restarting tasks ... done.
  372. [ 4693.436339] video LNXVIDEO:00: Restoring backlight state
  373. [ 4693.723379] tg3 0000:02:00.0: irq 43 for MSI/MSI-X
  374. [ 4693.734493] ADDRCONF(NETDEV_UP): eth0: link is not ready
  375. [ 4693.792213] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  376. [ 4694.253267] tg3 0000:02:00.0: eth0: Link is down
  377. [ 4694.581575] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
  378. [ 4696.272885] wlan0: authenticate with 00:90:d0:f6:1a:ce (try 1)
  379. [ 4696.274878] wlan0: authenticated
  380. [ 4696.274911] wlan0: associate with 00:90:d0:f6:1a:ce (try 1)
  381. [ 4696.277618] wlan0: RX AssocResp from 00:90:d0:f6:1a:ce (capab=0x411 status=0 aid=1)
  382. [ 4696.277623] wlan0: associated
  383. [ 4696.277969] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  384. [ 4706.336078] wlan0: no IPv6 routers present
  385. [ 7100.088209] usb 4-2: new full speed USB device using ohci_hcd and address 2
  386. [ 7100.248272] usb 4-2: not running at top speed; connect to a high speed hub
  387. [ 7100.279131] scsi9 : usb-storage 4-2:1.0
  388. [ 7101.287448] scsi 9:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
  389. [ 7101.289931] sd 9:0:0:0: Attached scsi generic sg2 type 0
  390. [ 7107.805309] sd 9:0:0:0: [sdb] Attached SCSI removable disk
  391. [ 7111.060979] usb 4-2: USB disconnect, address 2
  392. [ 8174.580224] usb 2-2: new high speed USB device using ehci_hcd and address 4
  393. [ 8174.731005] scsi10 : usb-storage 2-2:1.0
  394. [ 8175.730715] scsi 10:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
  395. [ 8175.733074] sd 10:0:0:0: Attached scsi generic sg2 type 0
  396. [ 8182.237608] sd 10:0:0:0: [sdb] Attached SCSI removable disk
  397. [ 8185.616093] usb 2-2: USB disconnect, address 4
  398. bekavac@bekavac-Aspire-5551:~$
  399.  
  400.  
  401.  
  402.  
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!