API tools faq
paste
Guest User

Untitled

a guest
Mar 4th, 2014
375
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 15.36 KB | None | 0 0
raw download clone embed print report
  1. (v000 ACPIAM ) @ 0x000f9f30
  2. ACPI: RSDT (v001 071913 RSDT1406 0x20130719 MSFT 0x00000097) @ 0x3f5b0000
  3. ACPI: FADT (v001 071913 FACP1406 0x20130719 MSFT 0x00000097) @ 0x3f5b0200
  4. ACPI: MADT (v001 071913 APIC1406 0x20130719 MSFT 0x00000097) @ 0x3f5b0390
  5. ACPI: MCFG (v001 071913 OEMMCFG 0x20130719 MSFT 0x00000097) @ 0x3f5b0400
  6. ACPI: OEMB (v001 071913 OEMB1406 0x20130719 MSFT 0x00000097) @ 0x3f5be040
  7. ACPI: HPET (v001 071913 OEMHPET 0x20130719 MSFT 0x00000097) @ 0x3f5ba440
  8. ACPI: GSCI (v001 071913 GMCHSCI 0x20130719 MSFT 0x00000097) @ 0x3f5be0d0
  9. ACPI: DSDT (v001 PD2CL PD2CL001 0x00000001 INTL 0x20051117) @ 0x00000000
  10. ACPI: PM-Timer IO Port: 0x808
  11. ACPI: Local APIC address 0xfee00000
  12. ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
  13. Processor #0 7:12 APIC version 20
  14. ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
  15. Processor #1 7:12 APIC version 20
  16. WARNING: NR_CPUS limit of 1 reached. Processor ignored.
  17. ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
  18. ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
  19. ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
  20. IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
  21. ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  22. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  23. ACPI: IRQ0 used by override.
  24. ACPI: IRQ2 used by override.
  25. ACPI: IRQ9 used by override.
  26. Enabling APIC mode: Flat. Using 1 I/O APICs
  27. ACPI: HPET id: 0xffffffff base: 0xfed00000
  28. Using ACPI (MADT) for SMP configuration information
  29. Allocating PCI resources starting at 50000000 (gap: 40000000:bee00000)
  30. Detected 1662.587 MHz processor.
  31. Built 1 zonelists. Total pages: 227584
  32. Kernel command line: root=/dev/sda3 reboot=b ide1=noprobe
  33. ide_setup: ide1=noprobe<6>pci_find_subsys() called while pci_devices is still empty
  34. pci_find_subsys() called while pci_devices is still empty
  35. pci_find_subsys() called while pci_devices is still empty
  36. pci_find_subsys() called while pci_devices is still empty
  37. pci_find_subsys() called while pci_devices is still empty
  38. pci_find_subsys() called while pci_devices is still empty
  39. pci_find_subsys() called while pci_devices is still empty
  40. pci_find_subsys() called while pci_devices is still empty
  41. pci_find_subsys() called while pci_devices is still empty
  42. pci_find_subsys() called while pci_devices is still empty
  43.  
  44. mapped APIC to ffffd000 (fee00000)
  45. mapped IOAPIC to ffffc000 (fec00000)
  46. Enabling fast FPU save and restore... done.
  47. Enabling unmasked SIMD FPU exception support... done.
  48. Initializing CPU#0
  49. PID hash table entries: 4096 (order: 12, 16384 bytes)
  50. Console: colour VGA+ 80x25
  51. Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  52. Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  53. Memory: 905052k/917504k available (2630k kernel code, 11976k reserved, 935k data, 216k init, 0k highmem)
  54. virtual kernel memory layout:
  55. fixmap : 0xfffb7000 - 0xfffff000 ( 288 kB)
  56. vmalloc : 0xf8800000 - 0xfffb5000 ( 119 MB)
  57. lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
  58. .init : 0xc047e000 - 0xc04b4000 ( 216 kB)
  59. .data : 0xc0391bd8 - 0xc047b898 ( 935 kB)
  60. .text : 0xc0100000 - 0xc0391bd8 (2630 kB)
  61. Checking if this processor honours the WP bit even in supervisor mode... Ok.
  62. Using HPET for base-timer
  63. Calibrating delay using timer specific routine.. 3327.67 BogoMIPS (lpj=6655353)
  64. Mount-cache hash table entries: 512
  65. CPU: After generic identify, caps: bfe9fbff 20100000 00000000 00000000 0040e39d 00000000 00000001
  66. monitor/mwait feature present.
  67. using mwait in idle threads.
  68. CPU: L1 I cache: 32K, L1 D cache: 24K
  69. CPU: L2 cache: 512K
  70. CPU: After all inits, caps: bfe9fbff 20100000 00000000 00000940 0040e39d 00000000 00000001
  71. Intel machine check architecture supported.
  72. Intel machine check reporting enabled on CPU#0.
  73. Compat vDSO mapped to ffffe000.
  74. CPU: Intel(R) Atom(TM) CPU N450 @ 1.66GHz stepping 0a
  75. Checking 'hlt' instruction... OK.
  76. ACPI: Core revision 20060707
  77. ENABLING IO-APIC IRQs
  78. ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
  79. NET: Registered protocol family 16
  80. ACPI: bus type pci registered
  81. PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
  82. PCI: Not using MMCONFIG.
  83. PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
  84. PCI: Using configuration type 1
  85. Setting up standard PCI resources
  86. ACPI: Interpreter enabled
  87. ACPI: Using IOAPIC for interrupt routing
  88. Error attaching device data
  89. Error attaching device data
  90. Error attaching device data
  91. Error attaching device data
  92. ACPI: PCI Root Bridge [PCI0] (0000:00)
  93. PCI: Probing PCI hardware (bus 00)
  94. Boot video device is 0000:00:02.0
  95. PCI: Transparent bridge - 0000:00:1e.0
  96. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  97. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
  98. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
  99. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
  100. ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *10 11 12 14 15)
  101. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
  102. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 *15)
  103. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 *11 12 14 15)
  104. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
  105. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
  106. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
  107. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 7 10 11 12 14 15)
  108. Linux Plug and Play Support v0.97 (c) Adam Belay
  109. SCSI subsystem initialized
  110. libata version 2.00 loaded.
  111. usbcore: registered new interface driver usbfs
  112. usbcore: registered new interface driver hub
  113. usbcore: registered new device driver usb
  114. PCI: Using ACPI for IRQ routing
  115. PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
  116. PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
  117. PCI: Bridge: 0000:00:1c.0
  118. IO window: disabled.
  119. MEM window: disabled.
  120. PREFETCH window: disabled.
  121. PCI: Bridge: 0000:00:1c.3
  122. IO window: e000-efff
  123. MEM window: disabled.
  124. PREFETCH window: fdf00000-fdffffff
  125. PCI: Bridge: 0000:00:1e.0
  126. IO window: disabled.
  127. MEM window: disabled.
  128. PREFETCH window: disabled.
  129. ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
  130. PCI: Setting latency timer of device 0000:00:1c.0 to 64
  131. ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 17
  132. PCI: Setting latency timer of device 0000:00:1c.3 to 64
  133. PCI: Setting latency timer of device 0000:00:1e.0 to 64
  134. NET: Registered protocol family 2
  135. IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  136. TCP established hash table entries: 131072 (order: 7, 524288 bytes)
  137. TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
  138. TCP: Hash tables configured (established 131072 bind 65536)
  139. TCP reno registered
  140. Machine check exception polling timer started.
  141. apm: BIOS not found.
  142. audit: initializing netlink socket (disabled)
  143. audit(1393947379.460:1): initialized
  144. io scheduler noop registered
  145. io scheduler anticipatory registered
  146. io scheduler deadline registered
  147. io scheduler cfq registered (default)
  148. lp: driver loaded but no devices found
  149. ppdev: user-space parallel port driver
  150. Linux agpgart interface v0.101 (c) Dave Jones
  151. vesafb: Intel Corporation, Intel(r)PineView Graphics Controller, Hardware Version 0.0 (OEM: Intel(r)PineView Graphics Chip Accelerated VGA BIOS)
  152. vesafb: VBE version: 3.0
  153. vesafb: VBIOS/hardware supports DDC2 transfers
  154. vesafb: monitor limits: vf = 76 Hz, hf = 60 kHz, clk = 78 MHz
  155. vesafb: scrolling: redraw
  156. vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 6144k, total 8128k
  157. fb0: VESA VGA frame buffer device
  158. ACPI: Power Button (FF) [PWRF]
  159. ACPI: Power Button (CM) [PWRB]
  160. isapnp: Scanning for PnP cards...
  161. isapnp: No Plug & Play device found
  162. Serial: 8250/16550 driver $Revision: 1.90 $ 6 ports, IRQ sharing enabled
  163. serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  164. serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
  165. parport0: PC-style at 0x378 [PCSPP(,...)]
  166. lp0: using parport0 (polling).
  167. RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
  168. loop: loaded (max 8 devices)
  169. Intel(R) PRO/1000 Network Driver - version 7.2.9-k4-NAPI
  170. Copyright (c) 1999-2006 Intel Corporation.
  171. pcnet32.c:v1.33 27.Jun.2006 [email protected]
  172. e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
  173. e100: Copyright(c) 1999-2006 Intel Corporation
  174. PPP generic driver version 2.4.2
  175. PPP Deflate Compression module registered
  176. PPP BSD Compression module registered
  177. NET: Registered protocol family 24
  178. r8169 Gigabit Ethernet driver 2.2LK loaded
  179. ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 19 (level, low) -> IRQ 17
  180. PCI: Setting latency timer of device 0000:02:00.0 to 64
  181. eth0: RTL8169s/8110s at 0xf881e000, 00:e0:b4:08:0b:34, IRQ 17
  182. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
  183. ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
  184. Probing IDE interface ide0...
  185. Probing IDE interface ide2...
  186. Probing IDE interface ide3...
  187. Probing IDE interface ide4...
  188. Probing IDE interface ide5...
  189. ata_piix 0000:00:1f.2: version 2.00ac6
  190. ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
  191. ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 17
  192. PCI: Setting latency timer of device 0000:00:1f.2 to 64
  193. ata1: SATA max UDMA/133 cmd 0xC800 ctl 0xD082 bmdma 0xC880 irq 17
  194. ata2: SATA max UDMA/133 cmd 0xD000 ctl 0xCC02 bmdma 0xC888 irq 17
  195. scsi0 : ata_piix
  196. ATA: abnormal status 0x7F on port 0xC807
  197. scsi1 : ata_piix
  198. ata2.00: ATA-9, max UDMA/100, 62533296 sectors: LBA48 NCQ (depth 0/32)
  199. ata2.00: ata2: dev 0 multi count 16
  200. ata2.00: configured for UDMA/100
  201. scsi 1:0:0:0: Direct-Access ATA C3000.6-M032 SVN2 PQ: 0 ANSI: 5
  202. SCSI device sda: 62533296 512-byte hdwr sectors (32017 MB)
  203. sda: Write Protect is off
  204. sda: Mode Sense: 00 3a 00 00
  205. SCSI device sda: drive cache: write back
  206. SCSI device sda: 62533296 512-byte hdwr sectors (32017 MB)
  207. sda: Write Protect is off
  208. sda: Mode Sense: 00 3a 00 00
  209. SCSI device sda: drive cache: write back
  210. sda: sda1 sda2 sda3
  211. sd 1:0:0:0: Attached scsi disk sda
  212. sd 1:0:0:0: Attached scsi generic sg0 type 0
  213. usbmon: debugfs is not available
  214. ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 18
  215. PCI: Setting latency timer of device 0000:00:1d.7 to 64
  216. ehci_hcd 0000:00:1d.7: EHCI Host Controller
  217. ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
  218. ehci_hcd 0000:00:1d.7: debug port 1
  219. PCI: cache line size of 32 is not supported by device 0000:00:1d.7
  220. ehci_hcd 0000:00:1d.7: irq 18, io mem 0xfebf3c00
  221. ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
  222. usb usb1: configuration #1 chosen from 1 choice
  223. hub 1-0:1.0: USB hub found
  224. hub 1-0:1.0: 8 ports detected
  225. ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
  226. USB Universal Host Controller Interface driver v3.0
  227. ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 18
  228. PCI: Setting latency timer of device 0000:00:1d.0 to 64
  229. uhci_hcd 0000:00:1d.0: UHCI Host Controller
  230. uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
  231. uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000d880
  232. usb usb2: configuration #1 chosen from 1 choice
  233. hub 2-0:1.0: USB hub found
  234. hub 2-0:1.0: 2 ports detected
  235. ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17
  236. PCI: Setting latency timer of device 0000:00:1d.1 to 64
  237. uhci_hcd 0000:00:1d.1: UHCI Host Controller
  238. uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
  239. uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000d800
  240. usb usb3: configuration #1 chosen from 1 choice
  241. hub 3-0:1.0: USB hub found
  242. hub 3-0:1.0: 2 ports detected
  243. ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
  244. PCI: Setting latency timer of device 0000:00:1d.2 to 64
  245. uhci_hcd 0000:00:1d.2: UHCI Host Controller
  246. uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
  247. uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000d480
  248. usb usb4: configuration #1 chosen from 1 choice
  249. hub 4-0:1.0: USB hub found
  250. hub 4-0:1.0: 2 ports detected
  251. ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
  252. PCI: Setting latency timer of device 0000:00:1d.3 to 64
  253. uhci_hcd 0000:00:1d.3: UHCI Host Controller
  254. uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
  255. uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d400
  256. usb usb5: configuration #1 chosen from 1 choice
  257. hub 5-0:1.0: USB hub found
  258. hub 5-0:1.0: 2 ports detected
  259. usb 3-2: new low speed USB device using uhci_hcd and address 2
  260. usb 3-2: configuration #1 chosen from 1 choice
  261. usb 4-2: new low speed USB device using uhci_hcd and address 2
  262. usb 4-2: configuration #1 chosen from 1 choice
  263. usbcore: registered new interface driver usblp
  264. /usr/src/linux-2.6.19-gentoo-r5/drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
  265. Initializing USB Mass Storage driver...
  266. usbcore: registered new interface driver usb-storage
  267. USB Mass Storage support registered.
  268. usbcore: registered new interface driver usblcd
  269. usbcore: registered new interface driver ldusb
  270. usbcore: registered new interface driver usbled
  271. PNP: No PS/2 controller found. Probing ports directly.
  272. serio: i8042 KBD port at 0x60,0x64 irq 1
  273. serio: i8042 AUX port at 0x60,0x64 irq 12
  274. mice: PS/2 mouse device common for all mice
  275. TCP cubic registered
  276. NET: Registered protocol family 1
  277. NET: Registered protocol family 17
  278. Using IPI Shortcut mode
  279. ACPI: (supports S0 S1 S4 S5)
  280. Time: tsc clocksource has been installed.
  281. input: AT Translated Set 2 keyboard as /class/input/input0
  282. kjournald starting. Commit interval 5 seconds
  283. EXT3-fs: mounted filesystem with ordered data mode.
  284. VFS: Mounted root (ext3 filesystem) readonly.
  285. Freeing unused kernel memory: 216k freed
  286. usbcore: registered new interface driver TouchKit
  287. EXT3 FS on sda3, internal journal
  288. Adding 1028152k swap on /dev/sda2. Priority:-1 extents:1 across:1028152k
  289. r8169: eth0: link up
  290. r8169: eth0: link up
  291. [vspm] init_module: start
  292. [vspm] init_module: registering devices
  293. [vspm] init_module: dev #0 MJ 100 (vsps0)
  294. [vspm] init_module: dev #0 MJ 101 (vsps0)
  295. [vspm] init_module: dev #1 MJ 100 (vsps1)
  296. [vspm] init_module: dev #1 MJ 101 (vsps1)
  297. [vspm] init_module: dev #2 MJ 100 (vsps2)
  298. [vspm] init_module: dev #2 MJ 101 (vsps2)
  299. [vspm] init_module: dev #3 MJ 100 (vsps3)
  300. [vspm] init_module: dev #3 MJ 101 (vsps3)
  301. [vspm] init_module: dev #4 MJ 100 (vsps4)
  302. [vspm] init_module: dev #4 MJ 101 (vsps4)
  303. [vspm] 5 devices created in /dev/vsp* with MJs [100;101]
  304. [vspm] init_module: end
  305. mtrr: no more MTRRs available
  306. mtrr: no more MTRRs available
  307. mtrr: no more MTRRs available
  308. [vspm] vsp_open vspd0 by (5368)vspd ret:0
  309. hub 4-0:1.0: port 2 disabled by hub (EMI?), re-enabling...
  310. usb 4-2: USB disconnect, address 2
  311. usb 4-2: new low speed USB device using uhci_hcd and address 3
  312. usb 4-2: configuration #1 chosen from 1 choice
  313. usb 1-8: new high speed USB device using ehci_hcd and address 4
  314. usb 1-8: configuration #1 chosen from 1 choice
  315. scsi2 : SCSI emulation for USB Mass Storage devices
  316. usb-storage: device found at 4
  317. usb-storage: waiting for device to settle before scanning
  318. scsi 2:0:0:0: Direct-Access pqi IntelligentStick 1.00 PQ: 0 ANSI: 2
  319. SCSI device sdb: 2023424 512-byte hdwr sectors (1036 MB)
  320. sdb: Write Protect is off
  321. sdb: Mode Sense: 23 00 00 00
  322. sdb: assuming drive cache: write through
  323. SCSI device sdb: 2023424 512-byte hdwr sectors (1036 MB)
  324. sdb: Write Protect is off
  325. sdb: Mode Sense: 23 00 00 00
  326. sdb: assuming drive cache: write through
  327. sdb: sdb1
  328. sd 2:0:0:0: Attached scsi removable disk sdb
  329. sd 2:0:0:0: Attached scsi generic sg1 type 0
  330. usb-storage: device scan complete
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!