Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- U-boot DB120
- DRAM: 128 MB
- id read 0x100000ff
- flash size 8MB, sector count = 128
- Flash: 8 MB
- Using default environment
- PCIe Reset OK!!!!!!
- In: serial
- Out: serial
- Err: serial
- Net: ag934x_enet_initialize...
- No valid address in Flash. Using fixed address
- wasp reset mask:c03300
- WASP ----> S17 PHY *
- : cfg1 0x7 cfg2 0x7114
- eth0: ba:be:fa:ce:08:41
- athrs17_reg_init: complete
- eth0 up
- eth0
- Autobooting in 1 seconds
- ## Booting image at 9f020000 ...
- Uncompressing Kernel Image ... OK
- Starting kernel ...
- Booting Atheros AR934x
- [ 0.000000] Linux version 2.6.31--LSDK-9.2.0_U6.616 (root@liaozhiming) (gcc version 4.3.3 (GCC) ) #1 Mon May 18 19:48:32 CST 2015
- [ 0.000000] Ram size passed from bootloader =128M
- [ 0.000000] flash_size passed from bootloader = 8
- [ 0.000000] CPU revision is: 0001974c (MIPS 74Kc)
- [ 0.000000] ath_sys_frequency: cpu srif ddr srif cpu 560 ddr 450 ahb 225
- [ 0.000000] Determined physical RAM map:
- [ 0.000000] memory: 08000000 @ 00000000 (usable)
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] Normal 0x00000000 -> 0x00008000
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[1] active PFN ranges
- [ 0.000000] 0: 0x00000000 -> 0x00008000
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
- [ 0.000000] Kernel command line: console=ttyS0,115200 root=31:02 rootfstype=squashfs init=/sbin/init mtdparts=ath-nor0:128k(u-boot),1024k(kernel),6848k(rootfs),128k(config),64k(ART) mem=128M
- [ 0.000000] PID hash table entries: 512 (order: 9, 2048 bytes)
- [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
- [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
- [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
- [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
- [ 0.000000] Writing ErrCtl register=00000000
- [ 0.000000] Readback ErrCtl register=00000000
- [ 0.000000] Memory: 112896k/131072k available (1856k kernel code, 17996k reserved, 432k data, 120k init, 0k highmem)
- [ 0.000000] NR_IRQS:128
- [ 0.000000] plat_time_init: plat time init done
- [ 0.000000] Calibrating delay loop... 279.55 BogoMIPS (lpj=559104)
- [ 0.096000] Mount-cache hash table entries: 512
- [ 0.096000]
- [ 0.096000] ****************ALLOC***********************
- [ 0.096000] Packet mem: 8026e4c0 (0xe00000 bytes)
- [ 0.096000] ********************************************
- [ 0.096000]
- [ 0.096000] NET: Registered protocol family 16
- [ 0.096000] PCI init:ath_pcibios_init
- [ 0.096000] ath_pcibios_init(294): PCI CMD write: 0x356
- [ 0.096000] registering PCI controller with io_map_base unset
- [ 0.096000] bio: create slab <bio-0> at 0
- [ 0.096000] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
- [ 0.096000] pci 0000:00:00.0: PME# disabled
- [ 0.096000] Returning IRQ 64
- [ 0.100000] NET: Registered protocol family 2
- [ 0.100000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.100000] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.100000] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.100000] TCP: Hash tables configured (established 4096 bind 4096)
- [ 0.100000] TCP reno registered
- [ 0.100000] NET: Registered protocol family 1
- [ 0.100000] ATH GPIOC major 0
- [ 0.100000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.100000] msgmni has been set to 220
- [ 0.100000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
- [ 0.100000] io scheduler noop registered
- [ 0.100000] io scheduler deadline registered (default)
- [ 0.100000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
- [ 0.104000] serial8250.0: ttyS0 at MMIO 0xb8020000 (irq = 19) is a 16550A
- [ 0.104000] console [ttyS0] enabled
- [ 0.404000] PPP generic driver version 2.4.2
- [ 0.408000] NET: Registered protocol family 24
- [ 0.412000] 5 cmdlinepart partitions found on MTD device ath-nor0
- [ 0.416000] Creating 5 MTD partitions on "ath-nor0":
- [ 0.424000] 0x000000000000-0x000000020000 : "u-boot"
- [ 0.428000] 0x000000020000-0x000000120000 : "kernel"
- [ 0.432000] 0x000000120000-0x0000007d0000 : "rootfs"
- [ 0.440000] 0x0000007d0000-0x0000007f0000 : "config"
- [ 0.444000] 0x0000007f0000-0x000000800000 : "ART"
- [ 0.448000] ->Oops: flash id 0xef4017 .
- [ 0.452000] ----TP IGMP has been init------
- [ 0.456000] TCP cubic registered
- [ 0.460000] NET: Registered protocol family 10
- [ 0.468000] NET: Registered protocol family 17
- [ 0.472000] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
- [ 0.476000] All bugs added by David S. Miller <davem@redhat.com>
- [ 0.484000] athwdt_init: Registering WDT success
- [ 0.488000] ath_otp_init: Registering OTP success
- [ 0.492000] ath_clksw_init: Registering Clock Switch Interface success
- [ 0.508000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
- [ 0.516000] Freeing unused kernel memory: 120k freed
- init started: BusyBox v1.01 (2015.04.24-06:01+0000) multi-call binary
- This Board use 2.6.31
- insmod: cannot open module `/lib/modules/2.6.31/kernel/x_tables.ko': No such file or directory
- insmod: cannot open module `/lib/modules/2.6.31/kernel/xt_tcpudp.ko': No such file or directory
- [ 1.688000] xt_time: kernel timezone is -0000
- [ 1.884000] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
- [ 1.888000] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
- [ 1.896000] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
- [ 1.904000] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
- [ 2.340000] ip_tables: (C) 2000-2006 Netfilter Core Team
- insmod: cannot open module `/lib/modules/2.6.31/kernel/iptable_raw.ko': No such file or directory
- insmod: cannot open module `/lib/modules/2.6.31/kernel/flashid.ko': No such file or directory
- [ 2.736000] PPPoL2TP kernel driver, V1.0
- [ 2.756000] PPTP driver version 0.8.3
- insmod: cannot open module `/lib/modules/2.6.31/kernel/harmony.ko': No such file or directory
- (none) mips #1 Mon May 18 19:48:32 CST 2015 (none)
- (none) login: [ 6.996000] Now flash open!
- [ 7.000000] Read from 0X20000 to 0X20120: OK
- [ 7.528000] Now flash open!
- [ 7.532000] Read from 0X7D0000 to 0X7E1F0C: OK
- [ 7.560000] Now flash open!
- [ 7.564000] Read from 0X1FC00 to 0X1FC06: OK
- [ 7.668000] Now flash open!
- [ 7.668000] Read from 0X1FE00 to 0X1FE08: OK
- [ 7.776000] Now flash open!
- [ 7.776000] Erase from 0X7D0000 to 0X7E1F0C:.
- [ 8.048000] Program from 0X7D0000 to 0X7E1F0C:.
- [ 8.520000] write successfully
- [ 8.528000] Now flash open!
- [ 8.528000] Read from 0X1FE00 to 0X1FE08: OK
- [ 8.536000] Now flash open!
- [ 8.536000] Erase from 0X7D0000 to 0X7E1F0C:.
- [ 8.808000] Program from 0X7D0000 to 0X7E1F0C:.
- [ 9.272000] write successfully
- [ 9.276000] Now flash open!
- [ 9.280000] Erase from 0X7D0000 to 0X7E1F0C:.
- [ 9.548000] Program from 0X7D0000 to 0X7E1F0C:.
- [ 10.020000] write successfully
- [ 10.356000] ATHR_GMAC: Length per segment 1536
- [ 10.360000] ATHR_GMAC: fifo cfg 3 01f00140
- [ 10.364000] ATHR_GMAC: RX TASKLET - Pkts per Intr:100
- [ 10.368000] ATHR_GMAC: Mac address for unit 0:bfff0000
- [ 10.376000] ATHR_GMAC: ff:ff:ff:ff:ff:ff
- [ 10.928000] ATHR_GMAC: Max segments per packet : 1
- [ 10.932000] ATHR_GMAC: Max tx descriptor count : 128
- [ 10.940000] ATHR_GMAC: Max rx descriptor count : 128
- [ 10.944000] ATHR_GMAC: Mac capability flags : 2381
- [ 10.976000] athr_gmac_ring_alloc Allocated 2048 at 0x87b13000
- [ 10.984000] athr_gmac_ring_alloc Allocated 2048 at 0x87a9e800
- [ 11.288000] WASP ----> S17 PHY *
- [ 11.292000] Setting Drop CRC Errors, Pause Frames and Length Error frames
- [ 11.364000] Hello, nat module!
- [ 11.368000] thread: napt_ct_scan create success pid:118
- [ 11.372000] netlink_kernel_create succeeded at tp_rule_nl_prot: [29]
- [ 11.384000] isis_ip_intf_entry_add id[0] for vid[1]
- [ 11.388000] isis_ip_intf_entry_add id[1] for vid[2]
- [ 11.392000]
- [ 11.392000] ######## S17 SSDK init succeeded! ########
- [ 11.412000] ++++ athrs17_igmp_setup once
- [ 11.440000] athrs17_reg_init:done
- [ 11.444000] Setting PHY...
- [ 12.452000] napt_ct_scan_thread: time: 4
- [ 12.456000] ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 12.500000] device eth0.1 entered promiscuous mode
- [ 12.516000] Now flash open!
- [ 12.516000] Read from 0X1FC00 to 0X1FC06: OK
- [ 12.524000] isis_ip_intf_entry_add id[0] for vid[1]
- [ 12.528000] Lan UDP checksum 0 adding rule #3
- [ 12.560000] ACL is not yet enabled. Enabling...
- [ 12.568000] isis_ip_intf_entry_add id[1] for vid[2]
- [ 12.572000] Wan UDP checksum 0 adding rule #2
- [ 12.592000] ttl adding rule #0
- [ 12.632000] device eth0 entered promiscuous mode
- [ 12.692000] br0: port 1(eth0.1) entering forwarding state
- [ 14.264000] Adding ACL rules 1 - wan to lan, dst ip is lan net
- usrconf_allocate_memory 212 shmget success id:43511 32769
- [ 14.880000] nf_conntrack_rtsp v0.6.21 loading
- [ 14.896000] nf_nat_rtsp v0.6.21 loading
- [ 14.948000] insmod nat_sip over !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
- [ 15.612000] Now flash open!
- [ 15.612000] Read from 0X20000 to 0X20120: OK
- [ 168.352000] fuse init (API version 7.12)
- [ 168.552000] usbcore: registered new interface driver usbfs
- [ 168.556000] usbcore: registered new interface driver hub
- [ 168.564000] usbcore: registered new device driver usb
- [ 168.596000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 168.640000] Port Status 1c000004
- [ 168.644000] ath-ehci ath-ehci.0: ATH EHCI
- [ 168.648000] ath-ehci ath-ehci.0: new USB bus registered, assigned bus number 1
- [ 168.656000] ehci_reset Intialize USB CONTROLLER in host mode: 13
- [ 168.664000] ehci_reset Port Status 1c000000
- [ 168.668000] ath-ehci ath-ehci.0: irq 3, io mem 0x1b000000
- [ 168.676000] ehci_reset Intialize USB CONTROLLER in host mode: 13
- [ 168.684000] ehci_reset Port Status 1c000000
- [ 168.700000] ath-ehci ath-ehci.0: USB 2.0 started, EHCI 1.00
- [ 168.704000] usb usb1: configuration #1 chosen from 1 choice
- [ 168.708000] hub 1-0:1.0: USB hub found
- [ 168.712000] hub 1-0:1.0: 1 port detected
- [ 168.932000] SCSI subsystem initialized
- [ 169.052000] usb 1-1: new high speed USB device using ath-ehci and address 2
- [ 169.200000] usb 1-1: configuration #1 chosen from 1 choice
- [ 169.208000] hub 1-1:1.0: USB hub found
- [ 169.212000] hub 1-1:1.0: 4 ports detected
- [ 169.264000] Initializing USB Mass Storage driver...
- [ 169.268000] usbcore: registered new interface driver usb-storage
- [ 169.272000] USB Mass Storage support registered.
- [ 170.940000] kcg 333 :GPL NetUSB up!
- [ 171.152000] NetUSB: module license 'Proprietary' taints kernel.
- [ 171.160000] Disabling lock debugging due to kernel taint
- [ 171.188000] kc 90 : run_telnetDBGDServer start
- [ 171.192000] kc 227 : init_DebugD end
- [ 171.196000] INFO17ED: NetUSB 1.02.66, 0002061F : Apr 22 2015 18:23:53
- [ 171.204000] INFO17EF: 7437: TL-WDR3600 v1 :TL-WDR3600 v1
- [ 171.208000] INFO17F0: AUTH ISOC
- [ 171.212000] INFO17F1: filterAudio
- [ 171.216000] usbcore: registered new interface driver KC NetUSB General Driver
- [ 171.224000] INFO0145: init proc : PAGE_SIZE 4096
- [ 171.232000] INFO16E1: infomap 86d0bf00
- [ 171.236000] INFO16E4: sleep to wait br0 to wake up
- [ 171.240000] INFO15B4: tcpConnector() started... : br0
- [ 171.256000] TP_RULE_NAT:enable hardware nat
- [ 171.304000] IPv6 over IPv4 tunneling driver
- [ 173.812000] (tp_mroute_enable_write)173, tp_mroute_enable = 1
- [ 174.268000] INFO1567: Bind to br0
- check success
- TL-WDR3600 mips #1 Mon May 18 19:48:32 CST 2015 (none)
- TL-WDR3600 login:
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement