Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- 0x00000000
- HELLO! BOOT0 is starting!
- boot0 version : 4.0.0
- fel_flag = 0x00000000
- rtc[0] value = 0x00000000
- rtc[1] value = 0x00000000
- rtc[2] value = 0x00000000
- rtc[3] value = 0x00000000
- rtc[4] value = 0x00000000
- rtc[5] value = 0x00000000
- rtc[6] value = 0x00000000
- rtc[7] value = 0x00000000
- DRAM DRIVE INFO: V0.8
- DRAM Type = 3 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
- DRAM CLK = 672 MHz
- DRAM zq value: 003b3bfb
- READ DQS LCDL = 001f1f1f
- DRAM SIZE =1024 M
- odt delay
- dram size =1024
- card boot number = 0
- card no is 0
- sdcard 0 line count 4
- [mmc]: mmc driver ver 2014-12-10 21:20:39
- [mmc]: ***Try SD card 0***
- [mmc]: SD/MMC Card: 4bit, capacity: 30528MB
- [mmc]: vendor: Man 001b534d Snr 92b628da
- [mmc]: product: 00000
- [mmc]: revision: 1.0
- [mmc]: ***SD/MMC 0 init OK!!!***
- sdcard 0 init ok
- The size of uboot is 000dc000.
- sum=ede66ee7
- src_sum=ede66ee7
- Succeed in loading uboot from sdmmc flash.
- Ready to disable icache.
- Jump to secend Boot.
- SUNXI_NORMAL_MODE
- [ 0.326]e mode
- U-Boot 2011.09-rc1 (Jun 21 2015 - 19:33:17) Allwinner Technology
- [ 0.333]version: 1.1.0
- normal mode
- [ 0.341]pmbus: ready
- not set main pmu id
- axp_probe error
- [ 0.356]PMU: pll1 1200 Mhz,PLL6=600 Mhz
- AXI=400 Mhz,AHB=200 Mhz, APB1=100 Mhz
- sid read already
- fel key new mode
- run key detect
- no key found
- 0xd
- dram_para_set start
- dram_para_set end
- normal mode
- [ 0.386]DRAM: 1 GiB
- relocation Offset is: 35af9000
- [box standby] read rtc = 0x0
- [box_start_os] mag be start_type no use
- user_gpio config
- user_gpio ok
- gic: normal or no secure os mode
- workmode = 0
- MMC: 0
- [ 0.460][mmc]: mmc driver ver 2014-12-10 9:23:00
- [ 0.465][mmc]: get sdc_phy_wipe fail.
- [ 0.469][mmc]: get sdc0 sdc_erase fail.
- [ 0.473][mmc]: get sdc_f_max fail,use default 50000000Hz
- [ 0.478][mmc]: get sdc_ex_dly_used fail,use default dly
- [ 0.484][mmc]: SUNXI SD/MMC: 0
- [ 0.497][mmc]: *Try SD card 0*
- [ 0.530][mmc]: CID 0x1b534d30 0x30303030 0x1092b628 0xda00f693
- [ 0.535][mmc]: mmc clk 50000000
- [ 0.539][mmc]: SD/MMC Card: 4bit, capacity: 30528MB
- [ 0.544][mmc]: boot0 capacity: 0KB,boot1 capacity: 0KB
- [ 0.549][mmc]: ***SD/MMC 0 init OK!!!***
- [ 0.553][mmc]: erase_grp_size:0x1WrBlk * 0x200 = 0x200 Byte
- [ 0.559][mmc]: secure_feature 0x0
- [ 0.562][mmc]: secure_removal_type 0x0
- [ 0.566]sunxi flash init ok
- script config pll_de to 864 Mhz
- Not Found clk pll_video1 in script
- script config pll_video to 297 Mhz
- [boot]disp_init_tv
- [DISP_TV] disp_init_tv enter g_tv_used
- screen 0 do not support TV TYPE!
- [BOOOT_DISP_TV] disp tv device_registered
- unable to find regulator vcc-hdmi-18 from [pmu1_regu] or [pmu2_regu]
- enable power vcc-hdmi-18, ret=-1
- DRV_DISP_Init end
- boot_disp.auto_hpd=1
- auto hpd check has 0 times!
- [disk_read_fs] no the partition
- error: open disp_rsl.fex, maybe it is not exist
- attched ok, mgr0<-->device0, type=4, mode=4----
- ready to set mode
- [ 1.447]finally, output_type=0x4, output_mode=0x4, screen_id=0x0, disp_para=0x404
- fail to find part named env
- Using default environment
- In: serial
- Out: serial
- Err: serial
- --------fastboot partitions--------
- mbr not exist
- base bootcmd=run setargs_mmc boot_normal
- bootcmd set setargs_mmc
- key 0
- cant find rcvy value
- cant find fstbt value
- no misc partition is found
- to be run cmd=run setargs_mmc boot_normal
- [ 1.485][mmc]: MMC Device 2 not found
- [ 1.489][mmc]: Can not find mmc dev
- [ 1.492][mmc]: read first backup failed in fun sdmmc_secure_storage_read line 1849
- sunxi_secstorage_read fail
- get secure storage map err
- the private part isn't exist
- WORK_MODE_BOOT
- adver not need show
- sunxi_bmp_logo_display
- [disk_read_fs] no the partition
- error: open bootlogo.bmp, maybe it is not exist
- sunxi bmp info error : unable to open logo file bootlogo.bmp
- [ 1.525]Hit any key to stop autoboot: 0
- sunxi#[ 0.326]
- Unknown command '[' - try 'help'
- sunxi#
- sunxi#
- sunxi#
- sunxi#U-Boot 2011.09-rc1 (Jun 21 2015 - 19:33:17) A
- Unknown command 'U-Boot' - try 'help'
- sunxi#3i#[ 0.326iiii#U-Boot 2011.09-rc1 (Jun 21 2015 - 19:33:17) i#3i#[ 0.326iiii#U-Boot 2011.09-rc1 (Jun 21 2015 - 19:33:17) i#3i#[ 0.326iiii#U-Boot 2011.09-rc1 (Jun 21 2015 - 19:33:17) i#3i#[ 0.326iiii#U-Boot 2011.09-rc1 (Jun 21 2015 - 19:3
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement