Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- === START OF INFORMATION SECTION ===
- Model Family: Seagate Barracuda 7200.10 family
- Device Model: ST3250410AS
- Serial Number: 6RY1TEJ8
- Firmware Version: 3.AAA
- User Capacity: 250 059 350 016 bytes
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: 7
- ATA Standard is: Exact ATA specification draft version not indicated
- Local Time is: Tue Nov 1 18:54:04 2011 MSK
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x82) Offline data collection activity
- was completed without error.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 430) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 92) minutes.
- SMART Attributes Data Structure revision number: 10
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000f 113 093 006 Pre-fail Always - 50987117
- 3 Spin_Up_Time 0x0003 099 097 000 Pre-fail Always - 0
- 4 Start_Stop_Count 0x0032 098 098 020 Old_age Always - 2974
- 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
- 7 Seek_Error_Rate 0x000f 084 060 030 Pre-fail Always - 321413303
- 9 Power_On_Hours 0x0032 083 083 000 Old_age Always - 15767
- 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 098 098 020 Old_age Always - 2950
- 187 Reported_Uncorrect 0x0032 096 096 000 Old_age Always - 4
- 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
- 190 Airflow_Temperature_Cel 0x0022 058 050 045 Old_age Always - 42 (Lifetime Min/Max 40/42)
- 194 Temperature_Celsius 0x0022 042 050 000 Old_age Always - 42 (0 14 0 0)
- 195 Hardware_ECC_Recovered 0x001a 071 053 000 Old_age Always - 99468397
- 197 Current_Pending_Sector 0x0012 001 001 000 Old_age Always - 4294967293
- 198 Offline_Uncorrectable 0x0010 001 001 000 Old_age Offline - 4294967293
- 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
- 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
- 202 Data_Address_Mark_Errs 0x0032 238 135 000 Old_age Always - 118
- SMART Error Log Version: 1
- ATA Error Count: 32 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 32 occurred at disk power-on lifetime: 12435 hours (518 days + 3 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 d2 6c 5f e0 Error: UNC at LBA = 0x005f6cd2 = 6253778
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 29 00 08 cf 6c 5f e0 00 00:10:17.023 READ MULTIPLE EXT
- 29 00 08 c7 6c 5f e0 00 00:10:17.022 READ MULTIPLE EXT
- 29 00 08 bf 6c 5f e0 00 00:10:17.021 READ MULTIPLE EXT
- 29 00 08 b7 6c 5f e0 00 00:10:17.020 READ MULTIPLE EXT
- 29 00 08 af 6c 5f e0 00 00:10:17.018 READ MULTIPLE EXT
- Error 31 occurred at disk power-on lifetime: 12435 hours (518 days + 3 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 d2 6c 5f e0 Error: UNC at LBA = 0x005f6cd2 = 6253778
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 29 00 80 67 6c 5f e0 00 00:10:13.128 READ MULTIPLE EXT
- 29 00 80 e7 6b 5f e0 00 00:10:13.112 READ MULTIPLE EXT
- 29 00 80 67 6b 5f e0 00 00:10:13.096 READ MULTIPLE EXT
- 29 00 80 e7 6a 5f e0 00 00:10:13.080 READ MULTIPLE EXT
- 29 00 80 67 6a 5f e0 00 00:10:13.063 READ MULTIPLE EXT
- Error 30 occurred at disk power-on lifetime: 12434 hours (518 days + 2 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 61 63 5e e0 Error: UNC at LBA = 0x005e6361 = 6185825
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 24 00 08 5f 63 5e e0 00 00:01:11.566 READ SECTOR(S) EXT
- 24 00 08 57 63 5e e0 00 00:01:11.565 READ SECTOR(S) EXT
- 24 00 08 4f 63 5e e0 00 00:01:11.545 READ SECTOR(S) EXT
- 24 00 08 47 63 5e e0 00 00:01:11.543 READ SECTOR(S) EXT
- 24 00 01 f4 13 e7 e0 00 00:01:11.543 READ SECTOR(S) EXT
- Error 29 occurred at disk power-on lifetime: 12434 hours (518 days + 2 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 61 63 5e e0 Error: UNC at LBA = 0x005e6361 = 6185825
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 29 00 80 2f 63 5e e0 00 00:01:07.590 READ MULTIPLE EXT
- 29 00 80 af 62 5e e0 00 00:01:07.574 READ MULTIPLE EXT
- 29 00 80 2f 62 5e e0 00 00:01:07.558 READ MULTIPLE EXT
- 29 00 80 af 61 5e e0 00 00:01:07.542 READ MULTIPLE EXT
- 29 00 80 2f 61 5e e0 00 00:01:07.525 READ MULTIPLE EXT
- Error 28 occurred at disk power-on lifetime: 11607 hours (483 days + 15 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 fa 48 03 e0 Error: UNC at LBA = 0x000348fa = 215290
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 24 00 08 f7 48 03 e0 00 00:05:18.619 READ SECTOR(S) EXT
- 24 00 01 00 00 00 e0 00 00:05:15.264 READ SECTOR(S) EXT
- 34 00 08 47 00 5e e0 00 00:05:15.247 WRITE SECTORS(S) EXT
- 34 00 08 97 21 48 e0 00 00:05:15.246 WRITE SECTORS(S) EXT
- 34 00 08 6f bc 06 e0 00 00:05:15.234 WRITE SECTORS(S) EXT
- SMART Self-test log structure revision number 1
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement