API tools faq
paste
Advertisement
Guest User

Ubuntu-smartmontools

a guest
Feb 9th, 2017
98
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.71 KB | None | 0 0
raw download clone embed print report
  1. ubuntu@ubuntu:~$ sudo smartctl -a /dev/sda
  2. smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-31-generic] (local build)
  3. Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
  4.  
  5. === START OF INFORMATION SECTION ===
  6. Model Family: HGST Travelstar 7K1000
  7. Device Model: HGST HTS721010A9E630
  8. Serial Number: JR100X4M1DP32E
  9. LU WWN Device Id: 5 000cca 8a8d3db29
  10. Firmware Version: JB0OA3J0
  11. User Capacity: 1,000,204,886,016 bytes [1.00 TB]
  12. Sector Sizes: 512 bytes logical, 4096 bytes physical
  13. Rotation Rate: 7200 rpm
  14. Form Factor: 2.5 inches
  15. Device is: In smartctl database [for details use: -P show]
  16. ATA Version is: ATA8-ACS T13/1699-D revision 6
  17. SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
  18. Local Time is: Wed Feb 8 03:09:47 2017 UTC
  19. SMART support is: Available - device has SMART capability.
  20. SMART support is: Enabled
  21.  
  22. === START OF READ SMART DATA SECTION ===
  23. SMART overall-health self-assessment test result: PASSED
  24.  
  25. General SMART Values:
  26. Offline data collection status: (0x00) Offline data collection activity
  27. was never started.
  28. Auto Offline Data Collection: Disabled.
  29. Self-test execution status: ( 0) The previous self-test routine completed
  30. without error or no self-test has ever
  31. been run.
  32. Total time to complete Offline
  33. data collection: ( 45) seconds.
  34. Offline data collection
  35. capabilities: (0x5b) SMART execute Offline immediate.
  36. Auto Offline data collection on/off support.
  37. Suspend Offline collection upon new
  38. command.
  39. Offline surface scan supported.
  40. Self-test supported.
  41. No Conveyance Self-test supported.
  42. Selective Self-test supported.
  43. SMART capabilities: (0x0003) Saves SMART data before entering
  44. power-saving mode.
  45. Supports SMART auto save timer.
  46. Error logging capability: (0x01) Error logging supported.
  47. General Purpose Logging supported.
  48. Short self-test routine
  49. recommended polling time: ( 2) minutes.
  50. Extended self-test routine
  51. recommended polling time: ( 185) minutes.
  52. SCT capabilities: (0x003d) SCT Status supported.
  53. SCT Error Recovery Control supported.
  54. SCT Feature Control supported.
  55. SCT Data Table supported.
  56.  
  57. SMART Attributes Data Structure revision number: 16
  58. Vendor Specific SMART Attributes with Thresholds:
  59. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  60. 1 Raw_Read_Error_Rate 0x000b 100 100 062 Pre-fail Always - 0
  61. 2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0
  62. 3 Spin_Up_Time 0x0007 120 120 033 Pre-fail Always - 2
  63. 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 518
  64. 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
  65. 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
  66. 8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail Offline - 0
  67. 9 Power_On_Hours 0x0012 099 099 000 Old_age Always - 621
  68. 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
  69. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 411
  70. 191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always - 0
  71. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 15
  72. 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 6802
  73. 194 Temperature_Celsius 0x0002 153 153 000 Old_age Always - 39 (Min/Max 13/47)
  74. 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
  75. 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
  76. 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
  77. 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 13
  78. 223 Load_Retry_Count 0x000a 100 100 000 Old_age Always - 0
  79.  
  80. SMART Error Log Version: 1
  81. ATA Error Count: 13 (device log contains only the most recent five errors)
  82. CR = Command Register [HEX]
  83. FR = Features Register [HEX]
  84. SC = Sector Count Register [HEX]
  85. SN = Sector Number Register [HEX]
  86. CL = Cylinder Low Register [HEX]
  87. CH = Cylinder High Register [HEX]
  88. DH = Device/Head Register [HEX]
  89. DC = Device Command Register [HEX]
  90. ER = Error register [HEX]
  91. ST = Status register [HEX]
  92. Powered_Up_Time is measured from power on, and printed as
  93. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  94. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  95.  
  96. Error 13 occurred at disk power-on lifetime: 549 hours (22 days + 21 hours)
  97. When the command that caused the error occurred, the device was active or idle.
  98.  
  99. After command completion occurred, registers were:
  100. ER ST SC SN CL CH DH
  101. — — — — — — —
  102. 84 51 78 40 26 5b 02 Error: ICRC, ABRT at LBA = 0x025b2640 = 39528000
  103.  
  104. Commands leading to the command that caused the error were:
  105. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  106. — — — — — — — — —------------— —------------------
  107. 61 68 00 50 24 5b 40 00 00:10:16.340 WRITE FPDMA QUEUED
  108. 61 58 f0 f0 8e ae 40 00 00:10:16.300 WRITE FPDMA QUEUED
  109. 61 08 e8 30 7c ae 40 00 00:10:16.296 WRITE FPDMA QUEUED
  110. 61 08 e0 30 7c ae 40 00 00:10:16.296 WRITE FPDMA QUEUED
  111. ea 00 00 00 00 00 a0 00 00:10:16.281 FLUSH CACHE EXT
  112.  
  113. Error 12 occurred at disk power-on lifetime: 524 hours (21 days + 20 hours)
  114. When the command that caused the error occurred, the device was active or idle.
  115.  
  116. After command completion occurred, registers were:
  117. ER ST SC SN CL CH DH
  118. — — — — — — —
  119. 84 51 08 d0 02 94 00 Error: ICRC, ABRT at LBA = 0x009402d0 = 9700048
  120.  
  121. Commands leading to the command that caused the error were:
  122. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  123. — — — — — — — — —------------— —------------------
  124. 61 88 e0 50 fe 93 40 00 00:11:58.778 WRITE FPDMA QUEUED
  125. 61 00 d8 50 f6 93 40 00 00:11:58.778 WRITE FPDMA QUEUED
  126. 61 08 d0 78 0b 83 40 00 00:11:58.778 WRITE FPDMA QUEUED
  127. 61 90 c8 b8 b7 43 40 00 00:11:58.777 WRITE FPDMA QUEUED
  128. 61 18 c0 80 08 88 40 00 00:11:58.777 WRITE FPDMA QUEUED
  129.  
  130. Error 11 occurred at disk power-on lifetime: 524 hours (21 days + 20 hours)
  131. When the command that caused the error occurred, the device was active or idle.
  132.  
  133. After command completion occurred, registers were:
  134. ER ST SC SN CL CH DH
  135. — — — — — — —
  136. 84 51 60 a0 f0 cb 0f Error: ICRC, ABRT at LBA = 0x0fcbf0a0 = 265023648
  137.  
  138. Commands leading to the command that caused the error were:
  139. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  140. — — — — — — — — —------------— —------------------
  141. 60 88 10 30 93 c9 40 00 00:02:29.269 READ FPDMA QUEUED
  142. 61 00 08 00 f0 cb 40 00 00:02:29.260 WRITE FPDMA QUEUED
  143. 61 00 00 00 e8 cb 40 00 00:02:29.260 WRITE FPDMA QUEUED
  144. 60 08 f0 48 0b bf 40 00 00:02:29.260 READ FPDMA QUEUED
  145. 60 20 e8 70 92 c9 40 00 00:02:29.258 READ FPDMA QUEUED
  146.  
  147. Error 10 occurred at disk power-on lifetime: 509 hours (21 days + 5 hours)
  148. When the command that caused the error occurred, the device was active or idle.
  149.  
  150. After command completion occurred, registers were:
  151. ER ST SC SN CL CH DH
  152. — — — — — — —
  153. 84 51 70 50 ec 12 00 Error: ICRC, ABRT at LBA = 0x0012ec50 = 1240144
  154.  
  155. Commands leading to the command that caused the error were:
  156. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  157. — — — — — — — — —------------— —------------------
  158. 61 00 d8 00 a8 13 40 00 03:01:00.965 WRITE FPDMA QUEUED
  159. 61 00 d0 00 a0 13 40 00 03:01:00.964 WRITE FPDMA QUEUED
  160. 61 00 c8 00 98 13 40 00 03:01:00.964 WRITE FPDMA QUEUED
  161. 61 00 c0 00 90 13 40 00 03:01:00.964 WRITE FPDMA QUEUED
  162. 61 00 b8 00 88 13 40 00 03:01:00.964 WRITE FPDMA QUEUED
  163.  
  164. Error 9 occurred at disk power-on lifetime: 440 hours (18 days + 8 hours)
  165. When the command that caused the error occurred, the device was active or idle.
  166.  
  167. After command completion occurred, registers were:
  168. ER ST SC SN CL CH DH
  169. — — — — — — —
  170. 84 51 80 40 2d 47 07 Error: ICRC, ABRT at LBA = 0x07472d40 = 122105152
  171.  
  172. Commands leading to the command that caused the error were:
  173. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  174. — — — — — — — — —------------— —------------------
  175. 61 00 f8 50 5e 48 40 00 00:45:44.385 WRITE FPDMA QUEUED
  176. 61 00 f0 50 5d 48 40 00 00:45:44.385 WRITE FPDMA QUEUED
  177. 61 00 e8 50 5c 48 40 00 00:45:44.385 WRITE FPDMA QUEUED
  178. 61 00 e0 50 5b 48 40 00 00:45:44.385 WRITE FPDMA QUEUED
  179. 61 00 d8 50 5a 48 40 00 00:45:44.385 WRITE FPDMA QUEUED
  180.  
  181. SMART Self-test log structure revision number 1
  182. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  183.  
  184. SMART Selective self-test log data structure revision number 1
  185. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  186. 1 0 0 Not_testing
  187. 2 0 0 Not_testing
  188. 3 0 0 Not_testing
  189. 4 0 0 Not_testing
  190. 5 0 0 Not_testing
  191. Selective self-test flags (0x0):
  192. After scanning selected spans, do NOT read-scan remainder of disk.
  193. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!