Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Disco con Linux (dove c'è anche la swap):
- root@sysresccd /root % smartctl -s on -a /dev/sda
- smartctl 5.42 2011-10-20 r3458 [i686-linux-3.2.19-std280-i586] (local build)
- Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
- === START OF INFORMATION SECTION ===
- Model Family: Maxtor DiamondMax 10 (ATA/133 and SATA/150)
- Device Model: Maxtor 6L200M0
- Serial Number: L409ESAH
- Firmware Version: BANC1E00
- User Capacity: 203,928,109,056 bytes [203 GB]
- Sector Size: 512 bytes logical/physical
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: 7
- ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0
- Local Time is: Mon Jul 9 16:03:50 2012 UTC
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF ENABLE/DISABLE COMMANDS SECTION ===
- SMART Enabled.
- Warning! SMART Attribute Thresholds Structure error: invalid SMART checksum.
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x82) Offline data collection activity
- was completed without error.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 1562) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 81) minutes.
- SCT capabilities: (0x0021) SCT Status supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 3 Spin_Up_Time 0x0027 207 204 063 Pre-fail Always - 11512
- 4 Start_Stop_Count 0x0032 253 253 000 Old_age Always - 310
- 5 Reallocated_Sector_Ct 0x0033 253 253 063 Pre-fail Always - 0
- 6 Read_Channel_Margin 0x0001 253 253 100 Pre-fail Offline - 0
- 7 Seek_Error_Rate 0x000a 253 252 000 Old_age Always - 0
- 8 Seek_Time_Performance 0x0027 249 234 187 Pre-fail Always - 32855
- 9 Power_On_Minutes 0x0032 111 111 000 Old_age Always - 328h+19m
- 10 Spin_Retry_Count 0x002b 253 248 157 Pre-fail Always - 0
- 11 Calibration_Retry_Count 0x002b 253 252 223 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 253 253 000 Old_age Always - 356
- 192 Power-Off_Retract_Count 0x0032 253 253 000 Old_age Always - 0
- 193 Load_Cycle_Count 0x0032 253 253 000 Old_age Always - 0
- 194 Temperature_Celsius 0x0032 047 253 000 Old_age Always - 49
- 195 Hardware_ECC_Recovered 0x000a 252 251 000 Old_age Always - 41462
- 196 Reallocated_Event_Count 0x0008 253 253 000 Old_age Offline - 0
- 197 Current_Pending_Sector 0x0008 253 253 000 Old_age Offline - 0
- 198 Offline_Uncorrectable 0x0008 253 253 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x0008 199 199 000 Old_age Offline - 0
- 200 Multi_Zone_Error_Rate 0x000a 253 252 000 Old_age Always - 0
- 201 Soft_Read_Error_Rate 0x000a 253 252 000 Old_age Always - 0
- 202 Data_Address_Mark_Errs 0x000a 253 252 000 Old_age Always - 0
- 203 Run_Out_Cancel 0x000b 253 252 180 Pre-fail Always - 0
- 204 Soft_ECC_Correction 0x000a 253 252 000 Old_age Always - 0
- 205 Thermal_Asperity_Rate 0x000a 253 252 000 Old_age Always - 0
- 207 Spin_High_Current 0x002a 253 248 000 Old_age Always - 0
- 208 Spin_Buzz 0x002a 253 252 000 Old_age Always - 0
- 209 Offline_Seek_Performnce 0x0024 240 240 000 Old_age Offline - 159
- 210 Unknown_Attribute 0x0032 253 252 000 Old_age Always - 0
- 211 Unknown_Attribute 0x0032 253 252 000 Old_age Always - 0
- 212 Unknown_Attribute 0x0032 253 252 000 Old_age Always - 0
- Warning! SMART ATA Error Log Structure error: invalid SMART checksum.
- SMART Error Log Version: 1
- No Errors Logged
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed without error 00% 36807 -
- # 2 Offline Aborted by host 70% 0 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- Disco di Storage:
- root@sysresccd /root % smartctl -s on -a /dev/sdb
- smartctl 5.42 2011-10-20 r3458 [i686-linux-3.2.19-std280-i586] (local build)
- Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
- === START OF INFORMATION SECTION ===
- Model Family: Western Digital Caviar Green (Adv. Format)
- Device Model: WDC WD10EARS-003BB1
- Serial Number: WD-WCAV5M363855
- LU WWN Device Id: 5 0014ee 2b00c7b06
- Firmware Version: 80.00A80
- User Capacity: 1,000,204,886,016 bytes [1.00 TB]
- Sector Size: 512 bytes logical/physical
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: 8
- ATA Standard is: Exact ATA specification draft version not indicated
- Local Time is: Mon Jul 9 16:05:34 2012 UTC
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF ENABLE/DISABLE COMMANDS SECTION ===
- SMART Enabled.
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x84) Offline data collection activity
- was suspended by an interrupting command from host.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: (22080) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 215) minutes.
- Conveyance self-test routine
- recommended polling time: ( 5) minutes.
- SCT capabilities: (0x3035) SCT Status supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
- 3 Spin_Up_Time 0x0027 124 117 021 Pre-fail Always - 6800
- 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 70
- 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
- 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
- 9 Power_On_Hours 0x0032 085 085 000 Old_age Always - 11620
- 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
- 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 68
- 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 42
- 193 Load_Cycle_Count 0x0032 001 001 000 Old_age Always - 806174
- 194 Temperature_Celsius 0x0022 102 085 000 Old_age Always - 45
- 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
- 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
- 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
- SMART Error Log Version: 1
- No Errors Logged
- SMART Self-test log structure revision number 1
- No self-tests have been logged. [To run self-tests, use: smartctl -t]
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- root@sysresccd /root %
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement