========================================================cpu0=================================================================
INTEL
(R) Core(TM)2 Duo CPU     E8400
2997.000 MHz
 Integrated GPU: NA
Temp: 45 °C
Family: 6
Model: 23
Stepping: 10
Cores: 2
Phy id: 0
Address sizes: 36 bits physical, 48 bits virtual
Bogomips: 5994.08
Flags: MMX, SSE, SSE2, XD-Bit, SSE3, SSSE3, SSE4.1,
x86 64-Bit Ext:  True
HW Virt:  True
Hyper-Threading:  False
Power mangament:
 TDP: 65 W
 PPS: 45 nm
 Die size: 104 mm²
 Package: FC-LGA6
 Turboclock: NA
 Voltage: 1.2 V
 Part: SLAPL
 Socket: Intel Socket 775
 TCaseMax: unknown
 Multiplier: 9.0x
 Codename: Wolfdale
 Memory support: DDR1, DDR2, DDR3

========================================================cpu1=================================================================
INTEL
(R) Core(TM)2 Duo CPU     E8400
2997.000 MHz
 Integrated GPU: NA
Temp: 50 °C
Family: 6
Model: 23
Stepping: 10
Cores: 2
Phy id: 0
Address sizes: 36 bits physical, 48 bits virtual
Bogomips: 5994.08
Flags: MMX, SSE, SSE2, XD-Bit, SSE3, SSSE3, SSE4.1,
x86 64-Bit Ext:  True
HW Virt:  True
Hyper-Threading:  False
Power mangament:
 TDP: 65 W
 PPS: 45 nm
 Die size: 104 mm²
 Package: FC-LGA6
 Turboclock: NA
 Voltage: 1.2 V
 Part: SLAPL
 Socket: Intel Socket 775
 TCaseMax: unknown
 Multiplier: 9.0x
 Codename: Wolfdale
 Memory support: DDR1, DDR2, DDR3

==========================================================CPUID===================================================================
GenuineIntel
Wolfdale (Core 2 Duo) 6M
Intel(R) Core(TM)2 Duo CPU     E8400  @ 3.00GHz
Cores:  2
Logical CPUS:  2
Total Logical CPUS:  2
Family:  6
Model:  7
Stepping:  10
Ext Family:  6
Ext Model:  23
CPU Clock:  2997
CPU Clock BY OS:  2997
CPU Clock BY IC:  -2
CPU Clock Measure:  2997
Mark TSC:  1350
Mark SYS Clock:  1
L1 Data:  32
L1 Instr:  32
L2 Cache:  6144
L3 Cache:  -1
L1 Assoc:  8
L2 Assoc:  24
L3 Assoc:  -1
L1 Cacheline:  64
L2 Cacheline:  64
L3 Cacheline:  -1
SSE Size:  128
==========================================================FLAGS===================================================================
AMD MMX-extended instructions supported | mmxext | Not Supported
Streaming-SIMD Extensions (SSE) supported | sse | Is Supported
SSE2 instructions supported | sse2 | Is Supported
AMD 3DNow! instructions supported | 3dnow | Not Supported
Virtual mode extension | vme | Is Supported
CLFLUSH instruction supported | clflush | Is Supported
SSSE3 instructionss supported (this is different from SSE3!) | ssse3 | Is Supported
Long mode (x86_64/EM64T) supported | lm | Is Supported
LAHF/SAHF supported in 64-bit mode | lahf_lm | Is Supported
Memory type range registers | mtrr | Is Supported
ACPI support (power states) | acpi | Is Supported
Virtualization technology supported | vmx | Is Supported
SYSCALL / SYSRET instructions supported | syscall | Not Supported
64-bit Debug store supported | dts64 | Is Supported
Floating point unit | fpu | Is Supported
Debugging extension | de | Is Supported
Virtual mode extension | vme | Is Supported
Page size extension | pse | Is Supported
Time-stamp counter | tsc | Is Supported
Model-specific regsisters, RDMSR/WRMSR supported | msr | Is Supported
Physical address extension | pae | Is Supported
Machine check exception | mce | Is Supported
CMPXCHG8/CMPXCHG8B instruction supported | cx8 | Is Supported
Advanced Programmable Interrupt Controller support | apic | Is Supported
Intel 64 Architecture x2APIC Specification | x2apic | Not Supported
SYSENTER / SYSEXIT instructions supported | sep | Is Supported
Page global enable | pge | Is Supported
Machine check architecture | mca | Is Supported
CMOVxx instructions supported | cmov | Is Supported
Page attribute table | pat | Is Supported
36-bit page address extension | pse36 | Is Supported
Processor serial # implemented (Intel P3 only) | pt | Not Supported
Debug store supported | dts | Is Supported
Self-snoop | ss | Is Supported
Thermal monitor | tm | Is Supported
IA64 supported (Itanium only) | ia64 | Not Supported
Pending-break enable | pbe | Is Supported
PNI (SSE3) instructions supported | pni | Is Supported
PCLMULQDQ instruction supported | pclmul | Not Supported
MONITOR / MWAIT supported | monitor | Is Supported
CPL Qualified Debug Store | ds_cpl | Is Supported
Safer mode exceptions | smx | Is Supported
Enhanced SpeedStep | est | Is Supported
Thermal monitor 2 | tm2 | Is Supported
Context ID supported | cid | Not Supported
CMPXCHG16B instruction supported | cx16 | Is Supported
Send Task Priority Messages disable | xtpr | Is Supported
Performance capabilities MSR supported | pdcm | Is Supported
Direct cache access supported | dca | Not Supported
SSE 4.1 instructions supported | sse4_1 | Is Supported
SSE 4.2 instructions supported | sse4_2 | Not Supported
SYSCALL / SYSRET instructions supported | syscall | Not Supported
Execute disable bit supported | xd | Is Supported
MOVBE instruction supported | movbe | Not Supported
POPCNT instruction supported | popcnt | Not Supported
AES* instructions supported | aes | Not Supported
XSAVE/XRSTOR/etc instructions supported | xsave | Is Supported
non-privileged copy of OSXSAVE supported | osxsave | Is Supported
Advanced vector extensions supported | avx | Not Supported
AMD 3DNow! extended instructions supported | 3dnowext | Not Supported
No-execute bit supported | nx | Not Supported
FFXSR: FXSAVE and FXRSTOR optimizations | opt | Not Supported
RDTSCP instruction supported (AMD-only) | rdtscp | Not Supported
Long mode (x86_64/EM64T) supported | lm | Is Supported
LAHF/SAHF supported in 64-bit mode | lahf_lm | Is Supported
Core multi-processing legacy mode | cmp_legacy | Not Supported
AMD Secure virtual machine | svm | Not Supported
SSE 4a from AMD | sse4a | Not Supported
Misaligned SSE supported | misalignsse | Not Supported
LZCNT instruction support | abm | Not Supported
PREFETCH/PREFETCHW support | 3dnowprefetch | Not Supported
OS Visible Workaround (AMD) | osvw | Not Supported
Instruction-based sampling | ibs | Not Supported
SSE 5 instructions supported (deprecated, will never be 1) | sse5 | Not Supported
SKINIT / STGI supported | skinit | Not Supported
Watchdog timer support | wdt | Not Supported
Temperature sensor | ts | Not Supported
Frequency ID control | fid | Not Supported
Voltage ID control | vid | Not Supported
THERMTRIP | ttp | Not Supported
AMD-specified hardware thermal control | tm_amd | Not Supported
Software thermal control | stc | Not Supported
100 MHz multiplier control | 100mhzsteps | Not Supported
Hardware P-state control | hwpstate | Not Supported
TSC ticks at constant rate | constant_tsc | Not Supported
The XOP instruction set (same as the old CPU_FEATURE_SSE5) | xop | Not Supported
The FMA3 instruction set | fma3 | Not Supported
The FMA4 instruction set | fma4 | Not Supported
Trailing bit manipulation instruction support | tbm | Not Supported
16-bit FP convert instruction support | f16c | Not Supported
RdRand instruction | rdrand | Not Supported
Hyper-threading supported (but might be disabled) | ht | Is Supported
MMX instruction set supported | mmx | Is Supported
Memory type range registers | mtrr | Is Supported


=========================================================================================================================
 NVIDIA Corporation GF114 [GeForce GTX 560 Ti]
OpenGL Vendor:  NVIDIA Corporation
OpenGL Renderer:  GeForce GTX 560 Ti/PCIe/SSE2
OpenGL Version:  4.5.0 NVIDIA 352.63
Client glx vendor:  NVIDIA Corporation
Client glx version:  1.4
Server glx vendor:  NVIDIA Corporation
Server glx version:  1.4
GLX version:  1.4
OpenGLES PVS:  OpenGL ES 3.1 NVIDIA 352.63
OpenGLES PSLVS:  OpenGL ES GLSL ES 3.10
Kernel driver in use:  nvidia
Total Memory prefetchable: 32M -
Total Memory non-prefetchable: 128M - 64M -
Present resolution:     1366x768 pixels (413x232 millimeters)
 minimum 8 x 8, current 1366 x 768, maximum 16384 x 16384

=========================================================================================================================
___________________Board___________________
Board Vendor:   ASUSTeK Computer INC.
Board Version:   4.01
Board Name:   V-P5G31
Board Asset Tag:  To Be Filled By O.E.M.
___________________Bios____________________
Bios Vendor:   American Megatrends Inc.
Bios Version:   0610
Bios Date:   07/13/2009
_________________Chassis__________________
Chassis Vendor:   Chassis Manufacture
Chassis Version:   Chassis Version
Chassis Type:   Asset-1234567890
Chassis Asset Tag:   System Product Name
_________________Product__________________
Product Name:   System Product Name
Product Version:   System Version

=============================================== HDA-Intel - HDA Intel===================================================
Codec: Realtek ALC662 rev1
HDA Intel Line
ALSA Driver Version k4.2.0-23-generic.
Codec: Realtek ALC662 rev1
Address: 0
AFG Function Id: 0x1 (unsol 1)
Vendor Id: 0x10ec0662
Subsystem Id: 0x10438290
Revision Id: 0x100101
No Modem Function Group found
Default PCM:
    rates [0x160]: 44100 48000 96000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
  Power states:  D0 D1 D2 D3
  Power: setting=D0, actual=D0
GPIO: io=2, o=0, i=0, unsolicited=1, wake=0
  IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
  IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x02 [Audio Output] wcaps 0x1d: Stereo Amp-Out
  Control: name="Front Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Device: name="ALC662 rev1 Analog", type="Audio", device=0
  Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
  Amp-Out vals:  [0x29 0x29]
  Converter: stream=5, channel=0
  PCM:
    rates [0x160]: 44100 48000 96000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
Node 0x03 [Audio Output] wcaps 0x1d: Stereo Amp-Out
  Control: name="Surround Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
  Amp-Out vals:  [0x29 0x29]
  Converter: stream=5, channel=0
  PCM:
    rates [0x160]: 44100 48000 96000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
Node 0x04 [Audio Output] wcaps 0x1d: Stereo Amp-Out
  Control: name="Center Playback Volume", index=0, device=0
    ControlAmp: chs=1, dir=Out, idx=0, ofs=0
  Control: name="LFE Playback Volume", index=0, device=0
    ControlAmp: chs=2, dir=Out, idx=0, ofs=0
  Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
  Amp-Out vals:  [0x29 0x29]
  Converter: stream=5, channel=0
  PCM:
    rates [0x160]: 44100 48000 96000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital
  Control: name="IEC958 Playback Con Mask", index=0, device=0
  Control: name="IEC958 Playback Pro Mask", index=0, device=0
  Control: name="IEC958 Playback Default", index=0, device=0
  Control: name="IEC958 Playback Switch", index=0, device=0
  Control: name="IEC958 Default PCM Playback Switch", index=0, device=0
  Device: name="ALC662 rev1 Digital", type="SPDIF", device=1
  Converter: stream=5, channel=0
  Digital:
  Digital category: 0x0
  IEC Coding Type: 0x0
  PCM:
    rates [0x160]: 44100 48000 96000
    bits [0x1e]: 16 20 24 32
    formats [0x1]: PCM
Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x08 [Audio Input] wcaps 0x10011b: Stereo Amp-In
  Control: name="Capture Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Control: name="Capture Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Device: name="ALC662 rev1 Analog", type="Audio", device=0
  Amp-In caps: ofs=0x09, nsteps=0x1f, stepsize=0x05, mute=1
  Amp-In vals:  [0x1f 0x1f]
  Converter: stream=1, channel=0
  SDI-Select: 0
  PCM:
    rates [0x160]: 44100 48000 96000
    bits [0x6]: 16 20
    formats [0x1]: PCM
  Connection: 1
     0x23
Node 0x09 [Audio Input] wcaps 0x10011b: Stereo Amp-In
  Control: name="Capture Volume", index=1, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Control: name="Capture Switch", index=1, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Device: name="ALC662 rev1 Alt Analog", type="Audio", device=2
  Amp-In caps: ofs=0x09, nsteps=0x1f, stepsize=0x05, mute=1
  Amp-In vals:  [0x80 0x80]
  Converter: stream=0, channel=0
  SDI-Select: 0
  PCM:
    rates [0x160]: 44100 48000 96000
    bits [0x6]: 16 20
    formats [0x1]: PCM
  Connection: 1
     0x22
Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Control: name="Front Mic Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=1, ofs=0
  Control: name="Front Mic Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=1, ofs=0
  Control: name="Rear Mic Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Control: name="Rear Mic Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Control: name="Line Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=2, ofs=0
  Control: name="Line Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=2, ofs=0
  Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
  Amp-In vals:  [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
  Connection: 9
     0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16
Node 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x00 0x00] [0x00 0x00]
  Connection: 2
     0x02 0x0b
Node 0x0d [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x80 0x80] [0x80 0x80]
  Connection: 2
     0x03 0x0b
Node 0x0e [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x80 0x80] [0x80 0x80]
  Connection: 2
     0x04 0x0b
Node 0x0f [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x12 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x14 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
  Control: name="Front Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x0001003c: IN OUT HP EAPD Detect
  EAPD 0x2: EAPD
  Pin Default 0x01014010: [Jack] Line Out at Ext Rear
    Conn = 1/8, Color = Green
    DefAssociation = 0x1, Sequence = 0x0
  Pin-ctls: 0x40: OUT
  Unsolicited: tag=05, enabled=1
  Connection: 1
     0x0c
Node 0x15 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x00010034: IN OUT EAPD Detect
  EAPD 0x2: EAPD
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN
  Unsolicited: tag=00, enabled=0
  Connection: 1
     0x0d
Node 0x16 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x00000034: IN OUT Detect
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN
  Unsolicited: tag=00, enabled=0
  Connection: 1
     0x0e
Node 0x17 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
  Control: name="Center Playback Switch", index=0, device=0
    ControlAmp: chs=1, dir=Out, idx=0, ofs=0
  Control: name="LFE Playback Switch", index=0, device=0
    ControlAmp: chs=2, dir=Out, idx=0, ofs=0
  Control: name="Rear Mic Boost Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x00001734: IN OUT Detect
    Vref caps: HIZ 50 GRD 80
  Pin Default 0x01a19840: [Jack] Mic at Ext Rear
    Conn = 1/8, Color = Pink
    DefAssociation = 0x4, Sequence = 0x0
  Pin-ctls: 0x24: IN VREF_80
  Unsolicited: tag=03, enabled=1
  Connection: 1
     0x0e
Node 0x19 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
  Control: name="Front Mic Boost Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x0000173c: IN OUT HP Detect
    Vref caps: HIZ 50 GRD 80
  Pin Default 0x02a19850: [Jack] Mic at Ext Front
    Conn = 1/8, Color = Pink
    DefAssociation = 0x5, Sequence = 0x0
  Pin-ctls: 0x24: IN VREF_80
  Unsolicited: tag=02, enabled=1
  Connection: 2
     0x0c* 0x0e
Node 0x1a [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
  Control: name="Surround Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x00000034: IN OUT Detect
  Pin Default 0x0181304f: [Jack] Line In at Ext Rear
    Conn = 1/8, Color = Blue
    DefAssociation = 0x4, Sequence = 0xf
  Pin-ctls: 0x20: IN
  Unsolicited: tag=04, enabled=1
  Connection: 1
     0x0d
Node 0x1b [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
  Control: name="Headphone Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x0000173c: IN OUT HP Detect
    Vref caps: HIZ 50 GRD 80
  Pin Default 0x02214020: [Jack] HP Out at Ext Front
    Conn = 1/8, Color = Green
    DefAssociation = 0x2, Sequence = 0x0
  Pin-ctls: 0xc0: OUT HP VREF_HIZ
  Unsolicited: tag=01, enabled=1
  Connection: 2
     0x0c* 0x0e
Node 0x1c [Pin Complex] wcaps 0x400001: Stereo
  Pincap 0x00000020: IN
  Pin Default 0x593301f0: [N/A] CD at Int ATAPI
    Conn = ATAPI, Color = Unknown
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN
Node 0x1d [Pin Complex] wcaps 0x400000: Mono
  Pincap 0x00000020: IN
  Pin Default 0x4005c603: [N/A] Line Out at Ext N/A
    Conn = Optical, Color = UNKNOWN
    DefAssociation = 0x0, Sequence = 0x3
  Pin-ctls: 0x20: IN
Node 0x1e [Pin Complex] wcaps 0x400300: Mono Digital
  Pincap 0x00000010: OUT
  Pin Default 0x99430130: [Fixed] SPDIF Out at Int ATAPI
    Conn = ATAPI, Color = Unknown
    DefAssociation = 0x3, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x40: OUT
  Connection: 1
     0x06
Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
  Processing caps: benign=0, ncoeff=12
Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x22 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x80 0x80] [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
  Connection: 10
     0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x0b
Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x80 0x80] [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
  Connection: 10
     0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x0b
Node 0x24 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x25 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x26 [Vendor Defined Widget] wcaps 0xf00000: Mono

=============================================== HDA-Intel - HDA Intel===================================================
Codec: Realtek ALC662 rev1
HDA Intel Line
ALSA Driver Version k4.2.0-23-generic.
Codec: Realtek ALC662 rev1
Address: 0
AFG Function Id: 0x1 (unsol 1)
Vendor Id: 0x10ec0662
Subsystem Id: 0x10438290
Revision Id: 0x100101
No Modem Function Group found
Default PCM:
    rates [0x160]: 44100 48000 96000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
  Power states:  D0 D1 D2 D3
  Power: setting=D0, actual=D0
GPIO: io=2, o=0, i=0, unsolicited=1, wake=0
  IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
  IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x02 [Audio Output] wcaps 0x1d: Stereo Amp-Out
  Control: name="Front Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Device: name="ALC662 rev1 Analog", type="Audio", device=0
  Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
  Amp-Out vals:  [0x29 0x29]
  Converter: stream=5, channel=0
  PCM:
    rates [0x160]: 44100 48000 96000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
Node 0x03 [Audio Output] wcaps 0x1d: Stereo Amp-Out
  Control: name="Surround Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
  Amp-Out vals:  [0x29 0x29]
  Converter: stream=5, channel=0
  PCM:
    rates [0x160]: 44100 48000 96000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
Node 0x04 [Audio Output] wcaps 0x1d: Stereo Amp-Out
  Control: name="Center Playback Volume", index=0, device=0
    ControlAmp: chs=1, dir=Out, idx=0, ofs=0
  Control: name="LFE Playback Volume", index=0, device=0
    ControlAmp: chs=2, dir=Out, idx=0, ofs=0
  Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
  Amp-Out vals:  [0x29 0x29]
  Converter: stream=5, channel=0
  PCM:
    rates [0x160]: 44100 48000 96000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital
  Control: name="IEC958 Playback Con Mask", index=0, device=0
  Control: name="IEC958 Playback Pro Mask", index=0, device=0
  Control: name="IEC958 Playback Default", index=0, device=0
  Control: name="IEC958 Playback Switch", index=0, device=0
  Control: name="IEC958 Default PCM Playback Switch", index=0, device=0
  Device: name="ALC662 rev1 Digital", type="SPDIF", device=1
  Converter: stream=5, channel=0
  Digital:
  Digital category: 0x0
  IEC Coding Type: 0x0
  PCM:
    rates [0x160]: 44100 48000 96000
    bits [0x1e]: 16 20 24 32
    formats [0x1]: PCM
Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x08 [Audio Input] wcaps 0x10011b: Stereo Amp-In
  Control: name="Capture Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Control: name="Capture Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Device: name="ALC662 rev1 Analog", type="Audio", device=0
  Amp-In caps: ofs=0x09, nsteps=0x1f, stepsize=0x05, mute=1
  Amp-In vals:  [0x1f 0x1f]
  Converter: stream=1, channel=0
  SDI-Select: 0
  PCM:
    rates [0x160]: 44100 48000 96000
    bits [0x6]: 16 20
    formats [0x1]: PCM
  Connection: 1
     0x23
Node 0x09 [Audio Input] wcaps 0x10011b: Stereo Amp-In
  Control: name="Capture Volume", index=1, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Control: name="Capture Switch", index=1, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Device: name="ALC662 rev1 Alt Analog", type="Audio", device=2
  Amp-In caps: ofs=0x09, nsteps=0x1f, stepsize=0x05, mute=1
  Amp-In vals:  [0x80 0x80]
  Converter: stream=0, channel=0
  SDI-Select: 0
  PCM:
    rates [0x160]: 44100 48000 96000
    bits [0x6]: 16 20
    formats [0x1]: PCM
  Connection: 1
     0x22
Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Control: name="Front Mic Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=1, ofs=0
  Control: name="Front Mic Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=1, ofs=0
  Control: name="Rear Mic Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Control: name="Rear Mic Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Control: name="Line Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=2, ofs=0
  Control: name="Line Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=2, ofs=0
  Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
  Amp-In vals:  [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
  Connection: 9
     0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16
Node 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x00 0x00] [0x00 0x00]
  Connection: 2
     0x02 0x0b
Node 0x0d [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x80 0x80] [0x80 0x80]
  Connection: 2
     0x03 0x0b
Node 0x0e [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x80 0x80] [0x80 0x80]
  Connection: 2
     0x04 0x0b
Node 0x0f [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x12 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x14 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
  Control: name="Front Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x0001003c: IN OUT HP EAPD Detect
  EAPD 0x2: EAPD
  Pin Default 0x01014010: [Jack] Line Out at Ext Rear
    Conn = 1/8, Color = Green
    DefAssociation = 0x1, Sequence = 0x0
  Pin-ctls: 0x40: OUT
  Unsolicited: tag=05, enabled=1
  Connection: 1
     0x0c
Node 0x15 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x00010034: IN OUT EAPD Detect
  EAPD 0x2: EAPD
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN
  Unsolicited: tag=00, enabled=0
  Connection: 1
     0x0d
Node 0x16 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x00000034: IN OUT Detect
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN
  Unsolicited: tag=00, enabled=0
  Connection: 1
     0x0e
Node 0x17 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
  Control: name="Center Playback Switch", index=0, device=0
    ControlAmp: chs=1, dir=Out, idx=0, ofs=0
  Control: name="LFE Playback Switch", index=0, device=0
    ControlAmp: chs=2, dir=Out, idx=0, ofs=0
  Control: name="Rear Mic Boost Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x00001734: IN OUT Detect
    Vref caps: HIZ 50 GRD 80
  Pin Default 0x01a19840: [Jack] Mic at Ext Rear
    Conn = 1/8, Color = Pink
    DefAssociation = 0x4, Sequence = 0x0
  Pin-ctls: 0x24: IN VREF_80
  Unsolicited: tag=03, enabled=1
  Connection: 1
     0x0e
Node 0x19 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
  Control: name="Front Mic Boost Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x0000173c: IN OUT HP Detect
    Vref caps: HIZ 50 GRD 80
  Pin Default 0x02a19850: [Jack] Mic at Ext Front
    Conn = 1/8, Color = Pink
    DefAssociation = 0x5, Sequence = 0x0
  Pin-ctls: 0x24: IN VREF_80
  Unsolicited: tag=02, enabled=1
  Connection: 2
     0x0c* 0x0e
Node 0x1a [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
  Control: name="Surround Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x00000034: IN OUT Detect
  Pin Default 0x0181304f: [Jack] Line In at Ext Rear
    Conn = 1/8, Color = Blue
    DefAssociation = 0x4, Sequence = 0xf
  Pin-ctls: 0x20: IN
  Unsolicited: tag=04, enabled=1
  Connection: 1
     0x0d
Node 0x1b [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
  Control: name="Headphone Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x0000173c: IN OUT HP Detect
    Vref caps: HIZ 50 GRD 80
  Pin Default 0x02214020: [Jack] HP Out at Ext Front
    Conn = 1/8, Color = Green
    DefAssociation = 0x2, Sequence = 0x0
  Pin-ctls: 0xc0: OUT HP VREF_HIZ
  Unsolicited: tag=01, enabled=1
  Connection: 2
     0x0c* 0x0e
Node 0x1c [Pin Complex] wcaps 0x400001: Stereo
  Pincap 0x00000020: IN
  Pin Default 0x593301f0: [N/A] CD at Int ATAPI
    Conn = ATAPI, Color = Unknown
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN
Node 0x1d [Pin Complex] wcaps 0x400000: Mono
  Pincap 0x00000020: IN
  Pin Default 0x4005c603: [N/A] Line Out at Ext N/A
    Conn = Optical, Color = UNKNOWN
    DefAssociation = 0x0, Sequence = 0x3
  Pin-ctls: 0x20: IN
Node 0x1e [Pin Complex] wcaps 0x400300: Mono Digital
  Pincap 0x00000010: OUT
  Pin Default 0x99430130: [Fixed] SPDIF Out at Int ATAPI
    Conn = ATAPI, Color = Unknown
    DefAssociation = 0x3, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x40: OUT
  Connection: 1
     0x06
Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
  Processing caps: benign=0, ncoeff=12
Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x22 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x80 0x80] [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
  Connection: 10
     0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x0b
Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x80 0x80] [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
  Connection: 10
     0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x0b
Node 0x24 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x25 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x26 [Vendor Defined Widget] wcaps 0xf00000: Mono

=============================================== HDA-Intel - HDA Intel===================================================
Codec: Realtek ALC662 rev1
HDA Intel Line
ALSA Driver Version k4.2.0-23-generic.
Codec: Realtek ALC662 rev1
Address: 0
AFG Function Id: 0x1 (unsol 1)
Vendor Id: 0x10ec0662
Subsystem Id: 0x10438290
Revision Id: 0x100101
No Modem Function Group found
Default PCM:
    rates [0x160]: 44100 48000 96000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
  Power states:  D0 D1 D2 D3
  Power: setting=D0, actual=D0
GPIO: io=2, o=0, i=0, unsolicited=1, wake=0
  IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
  IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x02 [Audio Output] wcaps 0x1d: Stereo Amp-Out
  Control: name="Front Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Device: name="ALC662 rev1 Analog", type="Audio", device=0
  Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
  Amp-Out vals:  [0x29 0x29]
  Converter: stream=5, channel=0
  PCM:
    rates [0x160]: 44100 48000 96000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
Node 0x03 [Audio Output] wcaps 0x1d: Stereo Amp-Out
  Control: name="Surround Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
  Amp-Out vals:  [0x29 0x29]
  Converter: stream=5, channel=0
  PCM:
    rates [0x160]: 44100 48000 96000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
Node 0x04 [Audio Output] wcaps 0x1d: Stereo Amp-Out
  Control: name="Center Playback Volume", index=0, device=0
    ControlAmp: chs=1, dir=Out, idx=0, ofs=0
  Control: name="LFE Playback Volume", index=0, device=0
    ControlAmp: chs=2, dir=Out, idx=0, ofs=0
  Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
  Amp-Out vals:  [0x29 0x29]
  Converter: stream=5, channel=0
  PCM:
    rates [0x160]: 44100 48000 96000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital
  Control: name="IEC958 Playback Con Mask", index=0, device=0
  Control: name="IEC958 Playback Pro Mask", index=0, device=0
  Control: name="IEC958 Playback Default", index=0, device=0
  Control: name="IEC958 Playback Switch", index=0, device=0
  Control: name="IEC958 Default PCM Playback Switch", index=0, device=0
  Device: name="ALC662 rev1 Digital", type="SPDIF", device=1
  Converter: stream=5, channel=0
  Digital:
  Digital category: 0x0
  IEC Coding Type: 0x0
  PCM:
    rates [0x160]: 44100 48000 96000
    bits [0x1e]: 16 20 24 32
    formats [0x1]: PCM
Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x08 [Audio Input] wcaps 0x10011b: Stereo Amp-In
  Control: name="Capture Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Control: name="Capture Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Device: name="ALC662 rev1 Analog", type="Audio", device=0
  Amp-In caps: ofs=0x09, nsteps=0x1f, stepsize=0x05, mute=1
  Amp-In vals:  [0x1f 0x1f]
  Converter: stream=1, channel=0
  SDI-Select: 0
  PCM:
    rates [0x160]: 44100 48000 96000
    bits [0x6]: 16 20
    formats [0x1]: PCM
  Connection: 1
     0x23
Node 0x09 [Audio Input] wcaps 0x10011b: Stereo Amp-In
  Control: name="Capture Volume", index=1, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Control: name="Capture Switch", index=1, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Device: name="ALC662 rev1 Alt Analog", type="Audio", device=2
  Amp-In caps: ofs=0x09, nsteps=0x1f, stepsize=0x05, mute=1
  Amp-In vals:  [0x80 0x80]
  Converter: stream=0, channel=0
  SDI-Select: 0
  PCM:
    rates [0x160]: 44100 48000 96000
    bits [0x6]: 16 20
    formats [0x1]: PCM
  Connection: 1
     0x22
Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Control: name="Front Mic Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=1, ofs=0
  Control: name="Front Mic Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=1, ofs=0
  Control: name="Rear Mic Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Control: name="Rear Mic Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Control: name="Line Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=2, ofs=0
  Control: name="Line Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=2, ofs=0
  Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
  Amp-In vals:  [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
  Connection: 9
     0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16
Node 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x00 0x00] [0x00 0x00]
  Connection: 2
     0x02 0x0b
Node 0x0d [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x80 0x80] [0x80 0x80]
  Connection: 2
     0x03 0x0b
Node 0x0e [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x80 0x80] [0x80 0x80]
  Connection: 2
     0x04 0x0b
Node 0x0f [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x12 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x14 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
  Control: name="Front Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x0001003c: IN OUT HP EAPD Detect
  EAPD 0x2: EAPD
  Pin Default 0x01014010: [Jack] Line Out at Ext Rear
    Conn = 1/8, Color = Green
    DefAssociation = 0x1, Sequence = 0x0
  Pin-ctls: 0x40: OUT
  Unsolicited: tag=05, enabled=1
  Connection: 1
     0x0c
Node 0x15 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x00010034: IN OUT EAPD Detect
  EAPD 0x2: EAPD
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN
  Unsolicited: tag=00, enabled=0
  Connection: 1
     0x0d
Node 0x16 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x00000034: IN OUT Detect
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN
  Unsolicited: tag=00, enabled=0
  Connection: 1
     0x0e
Node 0x17 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
  Control: name="Center Playback Switch", index=0, device=0
    ControlAmp: chs=1, dir=Out, idx=0, ofs=0
  Control: name="LFE Playback Switch", index=0, device=0
    ControlAmp: chs=2, dir=Out, idx=0, ofs=0
  Control: name="Rear Mic Boost Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x00001734: IN OUT Detect
    Vref caps: HIZ 50 GRD 80
  Pin Default 0x01a19840: [Jack] Mic at Ext Rear
    Conn = 1/8, Color = Pink
    DefAssociation = 0x4, Sequence = 0x0
  Pin-ctls: 0x24: IN VREF_80
  Unsolicited: tag=03, enabled=1
  Connection: 1
     0x0e
Node 0x19 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
  Control: name="Front Mic Boost Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x0000173c: IN OUT HP Detect
    Vref caps: HIZ 50 GRD 80
  Pin Default 0x02a19850: [Jack] Mic at Ext Front
    Conn = 1/8, Color = Pink
    DefAssociation = 0x5, Sequence = 0x0
  Pin-ctls: 0x24: IN VREF_80
  Unsolicited: tag=02, enabled=1
  Connection: 2
     0x0c* 0x0e
Node 0x1a [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
  Control: name="Surround Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x00000034: IN OUT Detect
  Pin Default 0x0181304f: [Jack] Line In at Ext Rear
    Conn = 1/8, Color = Blue
    DefAssociation = 0x4, Sequence = 0xf
  Pin-ctls: 0x20: IN
  Unsolicited: tag=04, enabled=1
  Connection: 1
     0x0d
Node 0x1b [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
  Control: name="Headphone Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x0000173c: IN OUT HP Detect
    Vref caps: HIZ 50 GRD 80
  Pin Default 0x02214020: [Jack] HP Out at Ext Front
    Conn = 1/8, Color = Green
    DefAssociation = 0x2, Sequence = 0x0
  Pin-ctls: 0xc0: OUT HP VREF_HIZ
  Unsolicited: tag=01, enabled=1
  Connection: 2
     0x0c* 0x0e
Node 0x1c [Pin Complex] wcaps 0x400001: Stereo
  Pincap 0x00000020: IN
  Pin Default 0x593301f0: [N/A] CD at Int ATAPI
    Conn = ATAPI, Color = Unknown
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN
Node 0x1d [Pin Complex] wcaps 0x400000: Mono
  Pincap 0x00000020: IN
  Pin Default 0x4005c603: [N/A] Line Out at Ext N/A
    Conn = Optical, Color = UNKNOWN
    DefAssociation = 0x0, Sequence = 0x3
  Pin-ctls: 0x20: IN
Node 0x1e [Pin Complex] wcaps 0x400300: Mono Digital
  Pincap 0x00000010: OUT
  Pin Default 0x99430130: [Fixed] SPDIF Out at Int ATAPI
    Conn = ATAPI, Color = Unknown
    DefAssociation = 0x3, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x40: OUT
  Connection: 1
     0x06
Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
  Processing caps: benign=0, ncoeff=12
Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x22 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x80 0x80] [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
  Connection: 10
     0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x0b
Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x80 0x80] [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
  Connection: 10
     0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x0b
Node 0x24 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x25 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x26 [Vendor Defined Widget] wcaps 0xf00000: Mono

=============================================== HDA-Intel - HDA Intel===================================================
Codec: Realtek ALC662 rev1
HDA Intel Line
ALSA Driver Version k4.2.0-23-generic.
Codec: Realtek ALC662 rev1
Address: 0
AFG Function Id: 0x1 (unsol 1)
Vendor Id: 0x10ec0662
Subsystem Id: 0x10438290
Revision Id: 0x100101
No Modem Function Group found
Default PCM:
    rates [0x160]: 44100 48000 96000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
  Power states:  D0 D1 D2 D3
  Power: setting=D0, actual=D0
GPIO: io=2, o=0, i=0, unsolicited=1, wake=0
  IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
  IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x02 [Audio Output] wcaps 0x1d: Stereo Amp-Out
  Control: name="Front Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Device: name="ALC662 rev1 Analog", type="Audio", device=0
  Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
  Amp-Out vals:  [0x29 0x29]
  Converter: stream=5, channel=0
  PCM:
    rates [0x160]: 44100 48000 96000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
Node 0x03 [Audio Output] wcaps 0x1d: Stereo Amp-Out
  Control: name="Surround Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
  Amp-Out vals:  [0x29 0x29]
  Converter: stream=5, channel=0
  PCM:
    rates [0x160]: 44100 48000 96000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
Node 0x04 [Audio Output] wcaps 0x1d: Stereo Amp-Out
  Control: name="Center Playback Volume", index=0, device=0
    ControlAmp: chs=1, dir=Out, idx=0, ofs=0
  Control: name="LFE Playback Volume", index=0, device=0
    ControlAmp: chs=2, dir=Out, idx=0, ofs=0
  Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
  Amp-Out vals:  [0x29 0x29]
  Converter: stream=5, channel=0
  PCM:
    rates [0x160]: 44100 48000 96000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital
  Control: name="IEC958 Playback Con Mask", index=0, device=0
  Control: name="IEC958 Playback Pro Mask", index=0, device=0
  Control: name="IEC958 Playback Default", index=0, device=0
  Control: name="IEC958 Playback Switch", index=0, device=0
  Control: name="IEC958 Default PCM Playback Switch", index=0, device=0
  Device: name="ALC662 rev1 Digital", type="SPDIF", device=1
  Converter: stream=5, channel=0
  Digital:
  Digital category: 0x0
  IEC Coding Type: 0x0
  PCM:
    rates [0x160]: 44100 48000 96000
    bits [0x1e]: 16 20 24 32
    formats [0x1]: PCM
Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x08 [Audio Input] wcaps 0x10011b: Stereo Amp-In
  Control: name="Capture Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Control: name="Capture Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Device: name="ALC662 rev1 Analog", type="Audio", device=0
  Amp-In caps: ofs=0x09, nsteps=0x1f, stepsize=0x05, mute=1
  Amp-In vals:  [0x1f 0x1f]
  Converter: stream=1, channel=0
  SDI-Select: 0
  PCM:
    rates [0x160]: 44100 48000 96000
    bits [0x6]: 16 20
    formats [0x1]: PCM
  Connection: 1
     0x23
Node 0x09 [Audio Input] wcaps 0x10011b: Stereo Amp-In
  Control: name="Capture Volume", index=1, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Control: name="Capture Switch", index=1, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Device: name="ALC662 rev1 Alt Analog", type="Audio", device=2
  Amp-In caps: ofs=0x09, nsteps=0x1f, stepsize=0x05, mute=1
  Amp-In vals:  [0x80 0x80]
  Converter: stream=0, channel=0
  SDI-Select: 0
  PCM:
    rates [0x160]: 44100 48000 96000
    bits [0x6]: 16 20
    formats [0x1]: PCM
  Connection: 1
     0x22
Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Control: name="Front Mic Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=1, ofs=0
  Control: name="Front Mic Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=1, ofs=0
  Control: name="Rear Mic Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Control: name="Rear Mic Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Control: name="Line Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=2, ofs=0
  Control: name="Line Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=2, ofs=0
  Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
  Amp-In vals:  [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
  Connection: 9
     0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16
Node 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x00 0x00] [0x00 0x00]
  Connection: 2
     0x02 0x0b
Node 0x0d [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x80 0x80] [0x80 0x80]
  Connection: 2
     0x03 0x0b
Node 0x0e [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x80 0x80] [0x80 0x80]
  Connection: 2
     0x04 0x0b
Node 0x0f [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x12 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x14 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
  Control: name="Front Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x0001003c: IN OUT HP EAPD Detect
  EAPD 0x2: EAPD
  Pin Default 0x01014010: [Jack] Line Out at Ext Rear
    Conn = 1/8, Color = Green
    DefAssociation = 0x1, Sequence = 0x0
  Pin-ctls: 0x40: OUT
  Unsolicited: tag=05, enabled=1
  Connection: 1
     0x0c
Node 0x15 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x00010034: IN OUT EAPD Detect
  EAPD 0x2: EAPD
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN
  Unsolicited: tag=00, enabled=0
  Connection: 1
     0x0d
Node 0x16 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x00000034: IN OUT Detect
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN
  Unsolicited: tag=00, enabled=0
  Connection: 1
     0x0e
Node 0x17 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
  Control: name="Center Playback Switch", index=0, device=0
    ControlAmp: chs=1, dir=Out, idx=0, ofs=0
  Control: name="LFE Playback Switch", index=0, device=0
    ControlAmp: chs=2, dir=Out, idx=0, ofs=0
  Control: name="Rear Mic Boost Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x00001734: IN OUT Detect
    Vref caps: HIZ 50 GRD 80
  Pin Default 0x01a19840: [Jack] Mic at Ext Rear
    Conn = 1/8, Color = Pink
    DefAssociation = 0x4, Sequence = 0x0
  Pin-ctls: 0x24: IN VREF_80
  Unsolicited: tag=03, enabled=1
  Connection: 1
     0x0e
Node 0x19 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
  Control: name="Front Mic Boost Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x0000173c: IN OUT HP Detect
    Vref caps: HIZ 50 GRD 80
  Pin Default 0x02a19850: [Jack] Mic at Ext Front
    Conn = 1/8, Color = Pink
    DefAssociation = 0x5, Sequence = 0x0
  Pin-ctls: 0x24: IN VREF_80
  Unsolicited: tag=02, enabled=1
  Connection: 2
     0x0c* 0x0e
Node 0x1a [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
  Control: name="Surround Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x00000034: IN OUT Detect
  Pin Default 0x0181304f: [Jack] Line In at Ext Rear
    Conn = 1/8, Color = Blue
    DefAssociation = 0x4, Sequence = 0xf
  Pin-ctls: 0x20: IN
  Unsolicited: tag=04, enabled=1
  Connection: 1
     0x0d
Node 0x1b [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
  Control: name="Headphone Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x0000173c: IN OUT HP Detect
    Vref caps: HIZ 50 GRD 80
  Pin Default 0x02214020: [Jack] HP Out at Ext Front
    Conn = 1/8, Color = Green
    DefAssociation = 0x2, Sequence = 0x0
  Pin-ctls: 0xc0: OUT HP VREF_HIZ
  Unsolicited: tag=01, enabled=1
  Connection: 2
     0x0c* 0x0e
Node 0x1c [Pin Complex] wcaps 0x400001: Stereo
  Pincap 0x00000020: IN
  Pin Default 0x593301f0: [N/A] CD at Int ATAPI
    Conn = ATAPI, Color = Unknown
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN
Node 0x1d [Pin Complex] wcaps 0x400000: Mono
  Pincap 0x00000020: IN
  Pin Default 0x4005c603: [N/A] Line Out at Ext N/A
    Conn = Optical, Color = UNKNOWN
    DefAssociation = 0x0, Sequence = 0x3
  Pin-ctls: 0x20: IN
Node 0x1e [Pin Complex] wcaps 0x400300: Mono Digital
  Pincap 0x00000010: OUT
  Pin Default 0x99430130: [Fixed] SPDIF Out at Int ATAPI
    Conn = ATAPI, Color = Unknown
    DefAssociation = 0x3, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x40: OUT
  Connection: 1
     0x06
Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
  Processing caps: benign=0, ncoeff=12
Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x22 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x80 0x80] [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
  Connection: 10
     0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x0b
Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x80 0x80] [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
  Connection: 10
     0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x0b
Node 0x24 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x25 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x26 [Vendor Defined Widget] wcaps 0xf00000: Mono


=========================================================================================================================
Distro Vendor: Ubuntu
Distro Release: 15.10
Desktop environment: Not Present
Window manager: Xfwm4
Window manager Theme: Greybird
GTK+ 2 Theme: Not Found
GTK+ 3 Theme: Not Found
GTK Icons: Not Found
GTK Font: Not Found
Hostname: Liyarin-PC
Deafult DM: /usr/sbin/lightdm
Timezone:  Europe/Lisbon
GLX Version:  1.4
X.Org Version: 1.17.2
Wireless-tools: 30
PPP: 2.4.6
Net-tools: 1.60
Arch: x86
Binutils 2.25.1
GCC Version: 5.2.1
Linux C Library:
GNU Make Version: 4.0
Dynamic linker (ldd): 2.21


=================================================== Machine =============================================================
Machine:     i686
System name:  Linux
Nodename:    Liyarin-PC
Release:     4.2.0-23-generic
Version:     #28-Ubuntu SMP Sun Dec 27 17:48:35 UTC 2015
================================================ Installed Kernels ======================================================

vmlinuz-4.2.0-23-generic
vmlinuz-4.2.0-25-generic
vmlinuz-4.2.0-16-generic
===================================================== Cmdline ===========================================================
BOOT_IMAGE=/boot/vmlinuz-4.2.0-23-generic root=UUID=2ba89d7d-0ac1-4d80-a1dc-f97999bcf9b6 ro quiet splash


=======================================================sda/sda1==================================================================
Vendor: ATA
Model: MAXTOR STM332061
Device rev: MC1H
Max sectors:
Point:
/
UUID:
2ba89d7d-0ac1-4d80-a1dc-f97999bcf9b6
Width:
rw,relatime,errors=remount-ro,data=ordered
Part size: 296.0 GB
State: running
Filesystem: ext4
Modalias: scsi:t-0x00
Ext range: 256
Range: 16
Removable: No
Discard granularity: 0
Discard zeroes data: 0
Discard max bytes: 0
HW sector size: 512
Add random: 1
Max sectors kb: 32767
Max HW sectors kb: 32767
Max segments: 128
Max segment size: 65536
Read ahead kb: 128
..:Scheduler:..
 deadline
Logical block size: 512
IO stats: 1

=======================================================sda/sda2==================================================================
Vendor: ATA
Model: MAXTOR STM332061
Device rev: MC1H
Max sectors:
Point:

UUID:

Width:

Part size: 1 KiB
State: running
Filesystem:
Modalias: scsi:t-0x00
Ext range: 256
Range: 16
Removable: No
Discard granularity: 0
Discard zeroes data: 0
Discard max bytes: 0
HW sector size: 512
Add random: 1
Max sectors kb: 32767
Max HW sectors kb: 32767
Max segments: 128
Max segment size: 65536
Read ahead kb: 128
..:Scheduler:..
 deadline
=======================================================sda/sda5==================================================================
Vendor: ATA
Model: MAXTOR STM332061
Device rev: MC1H
Max sectors:
Point:

UUID:
d21339f7-7664-459a-8d41-ee8723aaae2a
Width:

Part size: 1.9 GB
State: running
Filesystem:
Modalias: scsi:t-0x00
Ext range: 256
Range: 16
Removable: No
Discard granularity: 0
Discard zeroes data: 0
Discard max bytes: 0
HW sector size: 512
Add random: 1
Max sectors kb: 32767
Max HW sectors kb: 32767
Max segments: 128
Max segment size: 65536
Read ahead kb: 128
..:Scheduler:..
 deadline
Logical block size: 512
=======================================================sdb/==================================================================
Vendor: Generic
Model: USB SD Reader
Device rev: 1.00
Max sectors: 240
Point:

UUID:

Width:

Part size:
State: running
Filesystem:
Modalias: scsi:t-0x00
Ext range: 256
Range: 16
Removable: Yes
Discard granularity: 0
Discard zeroes data: 0
Discard max bytes: 0
HW sector size: 512
Add random: 1
Max sectors kb: 120
Max HW sectors kb: 120
Max segments: 2048
Max segment size: 65536
Read ahead kb: 128
..:Scheduler:..
 deadline
=======================================================sdc/==================================================================
Vendor: Generic
Model: USB CF Reader
Device rev: 1.01
Max sectors: 240
Point:

UUID:

Width:

Part size:
State: running
Filesystem:
Modalias: scsi:t-0x00
Ext range: 256
Range: 16
Removable: Yes
Discard granularity: 0
Discard zeroes data: 0
Discard max bytes: 0
HW sector size: 512
Add random: 1
Max sectors kb: 120
Max HW sectors kb: 120
Max segments: 2048
Max segment size: 65536
Read ahead kb: 128
..:Scheduler:..
 deadline
=======================================================sdd/==================================================================
Vendor: Generic
Model: USB SM Reader
Device rev: 1.02
Max sectors: 240
Point:

UUID:

Width:

Part size:
State: running
Filesystem:
Modalias: scsi:t-0x00
Ext range: 256
Range: 16
Removable: Yes
Discard granularity: 0
Discard zeroes data: 0
Discard max bytes: 0
HW sector size: 512
Add random: 1
Max sectors kb: 120
Max HW sectors kb: 120
Max segments: 2048
Max segment size: 65536
Read ahead kb: 128
..:Scheduler:..
 deadline
=======================================================sde/==================================================================
Vendor: Generic
Model: USB MS Reader
Device rev: 1.03
Max sectors: 240
Point:

UUID:

Width:

Part size:
State: running
Filesystem:
Modalias: scsi:t-0x00
Ext range: 256
Range: 16
Removable: Yes
Discard granularity: 0
Discard zeroes data: 0
Discard max bytes: 0
HW sector size: 512
Add random: 1
Max sectors kb: 120
Max HW sectors kb: 120
Max segments: 2048
Max segment size: 65536
Read ahead kb: 128
..:Scheduler:..
 deadline
=======================================================sdf/sdf1==================================================================
Vendor: Hitachi
Model: HDS721010CLA332
Device rev:
Max sectors: 240
Point:
/media/liyarin/Liyarin
UUID:
C0761E5A761E5190
Width:
rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096
Part size: 931.5 GB
State: running
Filesystem: fuseblk
Modalias: scsi:t-0x00
Ext range: 256
Range: 16
Removable: No
Discard granularity: 0
Discard zeroes data: 0
Discard max bytes: 0
HW sector size: 512
Add random: 1
Max sectors kb: 120
Max HW sectors kb: 120
Max segments: 2048
Max segment size: 65536
Read ahead kb: 128
..:Scheduler:..
 deadline
Logical block size: 512
IO stats: 1

=======================================================sdg/sdg1==================================================================
Vendor:
Model: USB Flash Memory
Device rev: 5.00
Max sectors: 240
Point:
/media/liyarin/JINSUNE 1GB
UUID:
E070-F2EA
Width:
rw,nosuid,nodev,relatime,uid=1000,gid=1000,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,showexec,utf8,flush,errors=remount-ro
Part size: 982 MB
State: running
Filesystem: vfat
Modalias: scsi:t-0x00
Ext range: 256
Range: 16
Removable: Yes
Discard granularity: 0
Discard zeroes data: 0
Discard max bytes: 0
HW sector size: 512
Add random: 1
Max sectors kb: 120
Max HW sectors kb: 120
Max segments: 2048
Max segment size: 65536
Read ahead kb: 128
..:Scheduler:..
 deadline
Logical block size: 512
IO stats: 1

=======================================================sr0/==================================================================
Vendor: HL-DT-ST
Model: DVDRRW GSA-H30L
Device rev: S655
Max sectors:
Point:

UUID:

Width:

Part size: 1023 MB
State: running
Filesystem:
Modalias: scsi:t-0x05
Ext range: 1
Range: 1
Removable: Yes
Discard granularity: 0
Discard zeroes data: 0
Discard max bytes: 0
HW sector size: 512
Add random: 1
Max sectors kb: 128
Max HW sectors kb: 128
Max segments: 127
Max segment size: 65536
Read ahead kb: 128
..:Scheduler:..
 deadline
========================================================LSPCI=================================================================
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 10)
00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 10)
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 01)
00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 01)
00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 01)
00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 01)
00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 01)
00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 IDE interface: Intel Corporation NM10/ICH7 Family SATA Controller [IDE mode] (rev 01)
00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 01)
01:00.0 VGA compatible controller: NVIDIA Corporation GF114 [GeForce GTX 560 Ti] (rev a1)
01:00.1 Audio device: NVIDIA Corporation GF114 HDMI Audio Controller (rev a1)
02:00.0 Ethernet controller: Qualcomm Atheros Attansic L1 Gigabit Ethernet (rev b0)
========================================================LSUSB=================================================================
Bus 001 Device 003: ID 058f:6362 Alcor Micro Corp. Flash Card Reader/Writer
Bus 001 Device 020: ID 0930:6545 Toshiba Corp. Kingston DataTraveler 102/2.0 / HEMA Flash Drive 2 GB / PNY Attache 4GB Stick
Bus 001 Device 019: ID 152d:2329 JMicron Technology Corp. / JMicron USA Technology Corp. JM20329 SATA Bridge
Bus 001 Device 021: ID 18ec:3399 Arkmicro Technologies Inc.
Bus 001 Device 018: ID 046d:c219 Logitech, Inc. Cordless RumblePad 2
Bus 001 Device 017: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 003: ID 03f0:3f11 Hewlett-Packard PSC-1315/PSC-1317
Bus 003 Device 002: ID 1532:0040 Razer USA, Ltd
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 1b1c:0a0a Corsair
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
========================================================SCSI=================================================================
Attached devices:
Host: scsi2 Channel: 00 Id: 00 Lun: 00
  Vendor: HL-DT-ST Model: DVDRRW GSA-H30L  Rev: S655
  Type:   CD-ROM                           ANSI  SCSI revision: 05
Host: scsi3 Channel: 00 Id: 00 Lun: 00
  Vendor: ATA      Model: MAXTOR STM332061 Rev: MC1H
  Type:   Direct-Access                    ANSI  SCSI revision: 05
Host: scsi4 Channel: 00 Id: 00 Lun: 00
  Vendor: Generic  Model: USB SD Reader    Rev: 1.00
  Type:   Direct-Access                    ANSI  SCSI revision: 00
Host: scsi4 Channel: 00 Id: 00 Lun: 01
  Vendor: Generic  Model: USB CF Reader    Rev: 1.01
  Type:   Direct-Access                    ANSI  SCSI revision: 00
Host: scsi4 Channel: 00 Id: 00 Lun: 02
  Vendor: Generic  Model: USB SM Reader    Rev: 1.02
  Type:   Direct-Access                    ANSI  SCSI revision: 00
Host: scsi4 Channel: 00 Id: 00 Lun: 03
  Vendor: Generic  Model: USB MS Reader    Rev: 1.03
  Type:   Direct-Access                    ANSI  SCSI revision: 00
Host: scsi15 Channel: 00 Id: 00 Lun: 00
  Vendor: Hitachi  Model: HDS721010CLA332  Rev:
  Type:   Direct-Access                    ANSI  SCSI revision: 02
Host: scsi16 Channel: 00 Id: 00 Lun: 00
  Vendor:          Model: USB Flash Memory Rev: 5.00
  Type:   Direct-Access                    ANSI  SCSI revision: 00
========================================================PROC MTRR=================================================================
reg00: base=0x000000000 (    0MB), size= 2048MB, count=1: write-back
========================================================PROC DEVICES=================================================================
Character devices:
  1 mem
  4 /dev/vc/0
  4 tty
  4 ttyS
  5 /dev/tty
  5 /dev/console
  5 /dev/ptmx
  5 ttyprintk
  6 lp
  7 vcs
 10 misc
 13 input
 21 sg
 29 fb
 81 video4linux
 89 i2c
 99 ppdev
108 ppp
116 alsa
128 ptm
136 pts
180 usb
189 usb_device
195 nvidia-frontend
203 cpu/cpuid
226 drm
247 media
248 hidraw
249 bsg
250 watchdog
251 rtc
252 dimmctl
253 ndctl
254 tpm

Block devices:
  1 ramdisk
  2 fd
259 blkext
  7 loop
  8 sd
  9 md
 11 sr
 65 sd
 66 sd
 67 sd
 68 sd
 69 sd
 70 sd
 71 sd
128 sd
129 sd
130 sd
131 sd
132 sd
133 sd
134 sd
135 sd
252 device-mapper
253 virtblk
254 mdp
========================================================PROC DISKSTATS=================================================================
   1       0 ram0 0 0 0 0 0 0 0 0 0 0 0
   1       1 ram1 0 0 0 0 0 0 0 0 0 0 0
   1       2 ram2 0 0 0 0 0 0 0 0 0 0 0
   1       3 ram3 0 0 0 0 0 0 0 0 0 0 0
   1       4 ram4 0 0 0 0 0 0 0 0 0 0 0
   1       5 ram5 0 0 0 0 0 0 0 0 0 0 0
   1       6 ram6 0 0 0 0 0 0 0 0 0 0 0
   1       7 ram7 0 0 0 0 0 0 0 0 0 0 0
   1       8 ram8 0 0 0 0 0 0 0 0 0 0 0
   1       9 ram9 0 0 0 0 0 0 0 0 0 0 0
   1      10 ram10 0 0 0 0 0 0 0 0 0 0 0
   1      11 ram11 0 0 0 0 0 0 0 0 0 0 0
   1      12 ram12 0 0 0 0 0 0 0 0 0 0 0
   1      13 ram13 0 0 0 0 0 0 0 0 0 0 0
   1      14 ram14 0 0 0 0 0 0 0 0 0 0 0
   1      15 ram15 0 0 0 0 0 0 0 0 0 0 0
   7       0 loop0 0 0 0 0 0 0 0 0 0 0 0
   7       1 loop1 0 0 0 0 0 0 0 0 0 0 0
   7       2 loop2 0 0 0 0 0 0 0 0 0 0 0
   7       3 loop3 0 0 0 0 0 0 0 0 0 0 0
   7       4 loop4 0 0 0 0 0 0 0 0 0 0 0
   7       5 loop5 0 0 0 0 0 0 0 0 0 0 0
   7       6 loop6 0 0 0 0 0 0 0 0 0 0 0
   7       7 loop7 0 0 0 0 0 0 0 0 0 0 0
  11       0 sr0 18 0 80 16 0 0 0 0 0 16 16
   8       0 sda 1707894 459632 193600670 23989536 973196 1616192 300227072 112556168 0 11033784 136562600
   8       1 sda1 1401135 318440 189995058 18991824 767104 689164 291557064 64971176 0 9824744 83967220
   8       2 sda2 18 0 28 408 0 0 0 0 0 408 408
   8       5 sda5 306139 141180 3580696 4993216 152561 927028 8670008 47170664 0 3615652 52171296
   2       0 fd0 2 0 16 24684 0 0 0 0 0 24684 24684
   8      16 sdb 0 0 0 0 0 0 0 0 0 0 0
   8      32 sdc 0 0 0 0 0 0 0 0 0 0 0
   8      48 sdd 0 0 0 0 0 0 0 0 0 0 0
   8      64 sde 0 0 0 0 0 0 0 0 0 0 0
   8      96 sdg 157 1023 3053 452 1 0 1 0 0 384 452
   8      97 sdg1 151 1023 3005 448 1 0 1 0 0 380 448
   8      80 sdf 262666 1 33528345 1759596 807 1635 19536 38664 0 470040 1798068
   8      81 sdf1 262658 1 33528265 1759576 807 1635 19536 38664 0 470020 1798048
========================================================PROC DMA=================================================================
 2: floppy
 3: parport0
 4: cascade
========================================================PROC PARTITIONS=================================================================
major minor  #blocks  name

   1        0      65536 ram0
   1        1      65536 ram1
   1        2      65536 ram2
   1        3      65536 ram3
   1        4      65536 ram4
   1        5      65536 ram5
   1        6      65536 ram6
   1        7      65536 ram7
   1        8      65536 ram8
   1        9      65536 ram9
   1       10      65536 ram10
   1       11      65536 ram11
   1       12      65536 ram12
   1       13      65536 ram13
   1       14      65536 ram14
   1       15      65536 ram15
  11        0    1048575 sr0
   8        0  312571224 sda
   8        1  310473728 sda1
   8        2          1 sda2
   8        5    2095104 sda5
   2        0          4 fd0
   8       96    1006592 sdg
   8       97    1006576 sdg1
   8       80  976762584 sdf
   8       81  976762552 sdf1
========================================================PROC modules=================================================================
nls_utf8 16384 0 - Live 0x00000000
btrfs 974848 0 - Live 0x00000000
xor 28672 1 btrfs, Live 0x00000000
raid6_pq 102400 1 btrfs, Live 0x00000000
ufs 77824 0 - Live 0x00000000
qnx4 16384 0 - Live 0x00000000
hfsplus 94208 0 - Live 0x00000000
hfs 57344 0 - Live 0x00000000
minix 32768 0 - Live 0x00000000
ntfs 102400 0 - Live 0x00000000
msdos 20480 0 - Live 0x00000000
jfs 176128 0 - Live 0x00000000
xfs 856064 0 - Live 0x00000000
libcrc32c 16384 1 xfs, Live 0x00000000
cpuid 16384 0 - Live 0x00000000
usblp 20480 0 - Live 0x00000000
snd_seq_dummy 16384 0 - Live 0x00000000
uvcvideo 77824 0 - Live 0x00000000
videobuf2_vmalloc 16384 1 uvcvideo, Live 0x00000000
videobuf2_memops 16384 1 videobuf2_vmalloc, Live 0x00000000
videobuf2_core 49152 1 uvcvideo, Live 0x00000000
v4l2_common 16384 1 videobuf2_core, Live 0x00000000
videodev 143360 3 uvcvideo,videobuf2_core,v4l2_common, Live 0x00000000
media 24576 2 uvcvideo,videodev, Live 0x00000000
nls_iso8859_1 16384 1 - Live 0x00000000
hid_logitech 32768 0 - Live 0x00000000
ff_memless 16384 1 hid_logitech, Live 0x00000000
snd_usb_audio 147456 7 - Live 0x00000000
snd_usbmidi_lib 28672 1 snd_usb_audio, Live 0x00000000
binfmt_misc 20480 1 - Live 0x00000000
nvidia 7794688 94 - Live 0x00000000 (POE)
snd_hda_codec_hdmi 49152 4 - Live 0x00000000
snd_hda_codec_realtek 73728 1 - Live 0x00000000
snd_hda_codec_generic 69632 1 snd_hda_codec_realtek, Live 0x00000000
snd_hda_intel 32768 5 - Live 0x00000000
snd_hda_codec 118784 4 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_codec_generic,snd_hda_intel, Live 0x00000000
snd_hda_core 57344 5 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_codec_generic,snd_hda_intel,snd_hda_codec, Live 0x00000000
snd_hwdep 16384 2 snd_usb_audio,snd_hda_codec, Live 0x00000000
snd_pcm 90112 7 snd_usb_audio,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hda_core, Live 0x00000000
coretemp 16384 0 - Live 0x00000000
snd_seq_midi 16384 0 - Live 0x00000000
kvm_intel 159744 0 - Live 0x00000000
snd_seq_midi_event 16384 1 snd_seq_midi, Live 0x00000000
kvm 454656 1 kvm_intel, Live 0x00000000
snd_rawmidi 28672 2 snd_usbmidi_lib,snd_seq_midi, Live 0x00000000
snd_seq 57344 3 snd_seq_dummy,snd_seq_midi,snd_seq_midi_event, Live 0x00000000
snd_seq_device 16384 3 snd_seq_midi,snd_rawmidi,snd_seq, Live 0x00000000
gpio_ich 16384 0 - Live 0x00000000
snd_timer 32768 4 snd_pcm,snd_seq, Live 0x00000000
joydev 20480 0 - Live 0x00000000
drm 303104 4 nvidia, Live 0x00000000
snd 69632 33 snd_usb_audio,snd_usbmidi_lib,snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_codec_generic,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_seq_device,snd_timer, Live 0x00000000
soundcore 16384 1 snd, Live 0x00000000
input_leds 16384 0 - Live 0x00000000
serio_raw 16384 0 - Live 0x00000000
lpc_ich 20480 0 - Live 0x00000000
8250_fintek 16384 0 - Live 0x00000000
shpchp 32768 0 - Live 0x00000000
asus_atk0110 20480 0 - Live 0x00000000
mac_hid 16384 0 - Live 0x00000000
parport_pc 32768 1 - Live 0x00000000
ppdev 20480 0 - Live 0x00000000
lp 20480 0 - Live 0x00000000
parport 45056 3 parport_pc,ppdev,lp, Live 0x00000000
autofs4 40960 2 - Live 0x00000000
hid_generic 16384 0 - Live 0x00000000
usbhid 49152 0 - Live 0x00000000
hid 98304 3 hid_logitech,hid_generic,usbhid, Live 0x00000000
uas 20480 0 - Live 0x00000000
usb_storage 57344 3 uas, Live 0x00000000
psmouse 118784 0 - Live 0x00000000
floppy 61440 0 - Live 0x00000000
atl1 36864 0 - Live 0x00000000
pata_acpi 16384 0 - Live 0x00000000
mii 16384 1 atl1, Live 0x00000000
========================================================PROC cmdline=================================================================
BOOT_IMAGE=/boot/vmlinuz-4.2.0-23-generic root=UUID=2ba89d7d-0ac1-4d80-a1dc-f97999bcf9b6 ro quiet splash
========================================================PROC GRUB=================================================================
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
========================================================DMESG=================================================================
[    0.121698] pci 0000:00:1f.1: reg 0x10: [io  0x0000-0x0007]
[    0.121705] pci 0000:00:1f.1: reg 0x14: [io  0x0000-0x0003]
[    0.121713] pci 0000:00:1f.1: reg 0x18: [io  0x08f0-0x08f7]
[    0.121720] pci 0000:00:1f.1: reg 0x1c: [io  0x08f8-0x08fb]
[    0.121728] pci 0000:00:1f.1: reg 0x20: [io  0xffa0-0xffaf]
[    0.121744] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.121746] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.121747] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.121749] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.121815] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
[    0.121830] pci 0000:00:1f.2: reg 0x10: [io  0xd400-0xd407]
[    0.121836] pci 0000:00:1f.2: reg 0x14: [io  0xd080-0xd083]
[    0.121843] pci 0000:00:1f.2: reg 0x18: [io  0xd000-0xd007]
[    0.121849] pci 0000:00:1f.2: reg 0x1c: [io  0xcc00-0xcc03]
[    0.121856] pci 0000:00:1f.2: reg 0x20: [io  0xc880-0xc88f]
[    0.121879] pci 0000:00:1f.2: PME# supported from D3hot
[    0.121949] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.121995] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.122109] pci 0000:01:00.0: [10de:1200] type 00 class 0x030000
[    0.122127] pci 0000:01:00.0: reg 0x10: [mem 0xfc000000-0xfdffffff]
[    0.122136] pci 0000:01:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref]
[    0.122145] pci 0000:01:00.0: reg 0x1c: [mem 0xe4000000-0xe7ffffff 64bit pref]
[    0.122151] pci 0000:01:00.0: reg 0x24: [io  0xec00-0xec7f]
[    0.122157] pci 0000:01:00.0: reg 0x30: [mem 0xfea00000-0xfea7ffff pref]
[    0.122222] pci 0000:01:00.1: [10de:0e0c] type 00 class 0x040300
[    0.122239] pci 0000:01:00.1: reg 0x10: [mem 0xfeafc000-0xfeafffff]
[    0.122333] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.122336] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.122338] pci 0000:00:01.0:   bridge window [mem 0xfc000000-0xfeafffff]
[    0.122342] pci 0000:00:01.0:   bridge window [mem 0xe4000000-0xefffffff 64bit pref]
[    0.122381] pci 0000:00:1c.0: PCI bridge to [bus 03]
[    0.122445] pci 0000:02:00.0: [1969:1048] type 00 class 0x020000
[    0.122483] pci 0000:02:00.0: reg 0x10: [mem 0xfebc0000-0xfebfffff 64bit]
[    0.122529] pci 0000:02:00.0: reg 0x30: [mem 0xfeba0000-0xfebbffff pref]
[    0.122560] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.122612] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.122619] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.122624] pci 0000:00:1c.1:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.122690] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[    0.122698] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.122700] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.122702] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.122704] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[    0.122706] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xffffffff window] (subtractive decode)
[    0.122725] pci_bus 0000:00: on NUMA node 0
[    0.123421] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.123469] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.123516] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.123562] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.123608] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.123655] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.123702] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.123749] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.123801] ACPI: Enabled 2 GPEs in block 00 to 1F
[    0.123881] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.123881] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.123881] vgaarb: loaded
[    0.123881] vgaarb: bridge control possible 0000:01:00.0
[    0.124163] SCSI subsystem initialized
[    0.124193] libata version 3.00 loaded.
[    0.124220] ACPI: bus type USB registered
[    0.124240] usbcore: registered new interface driver usbfs
[    0.124251] usbcore: registered new interface driver hub
[    0.124264] usbcore: registered new device driver usb
[    0.124313] PCI: Using ACPI for IRQ routing
[    0.124313] PCI: pci_cache_line_size set to 64 bytes
[    0.124313] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.124313] e820: reserve RAM buffer [mem 0x7ffa0000-0x7fffffff]
[    0.124313] NetLabel: Initializing
[    0.124313] NetLabel:  domain hash size = 128
[    0.124313] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.124313] NetLabel:  unlabeled traffic allowed by default
[    0.124313] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.124313] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.124313] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.126093] clocksource: Switched to clocksource hpet
[    0.131317] AppArmor: AppArmor Filesystem Enabled
[    0.131376] pnp: PnP ACPI init
[    0.131447] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[    0.131451] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.131506] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.131723] pnp 00:02: [dma 2]
[    0.131769] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.132029] pnp 00:03: [dma 3]
[    0.132126] pnp 00:03: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.132181] system 00:04: [io  0x0290-0x0297] has been reserved
[    0.132184] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.132306] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.132309] system 00:05: [io  0x0800-0x087f] could not be reserved
[    0.132311] system 00:05: [io  0x0480-0x04bf] has been reserved
[    0.132313] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.132315] system 00:05: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.132318] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.132412] system 00:06: [mem 0xffc00000-0xffefffff] has been reserved
[    0.132415] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.132490] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.132493] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.132495] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.132547] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.132608] pnp 00:09: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    0.132788] pnp 00:0a: [dma 0 disabled]
[    0.132845] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.132901] system 00:0b: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.132904] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.133076] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.133079] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.133081] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.133083] system 00:0c: [mem 0x00100000-0x7fffffff] could not be reserved
[    0.133086] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.133189] pnp: PnP ACPI: found 13 devices
[    0.133193] PnPBIOS: Disabled by ACPI PNP
[    0.169773] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.169790] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
[    0.169793] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[    0.169796] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 add_align 100000
[    0.169803] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.169805] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.169814] pci 0000:00:1f.0: BAR 13: [io  size 0x0080] has bogus alignment
[    0.169817] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.169819] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.169821] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.169823] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.169825] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.169828] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.169830] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.169832] pci 0000:00:1c.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.169834] pci 0000:00:1c.1: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.169836] pci 0000:00:1c.1: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.169841] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x801fffff]
[    0.169846] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
[    0.169850] pci 0000:00:1c.1: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref]
[    0.169853] pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
[    0.169855] pci 0000:00:1c.1: BAR 13: assigned [io  0x2000-0x2fff]
[    0.169858] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.169860] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.169863] pci 0000:00:01.0:   bridge window [mem 0xfc000000-0xfeafffff]
[    0.169866] pci 0000:00:01.0:   bridge window [mem 0xe4000000-0xefffffff 64bit pref]
[    0.169869] pci 0000:00:1c.0: PCI bridge to [bus 03]
[    0.169871] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.169875] pci 0000:00:1c.0:   bridge window [mem 0x80000000-0x801fffff]
[    0.169878] pci 0000:00:1c.0:   bridge window [mem 0x80200000-0x803fffff 64bit pref]
[    0.169883] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.169885] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    0.169889] pci 0000:00:1c.1:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.169892] pci 0000:00:1c.1:   bridge window [mem 0x80400000-0x805fffff 64bit pref]
[    0.169897] pci 0000:00:1e.0: PCI bridge to [bus 04]
[    0.169905] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.169907] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.169909] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.169911] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.169913] pci_bus 0000:00: resource 8 [mem 0x80000000-0xffffffff window]
[    0.169914] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.169916] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfeafffff]
[    0.169918] pci_bus 0000:01: resource 2 [mem 0xe4000000-0xefffffff 64bit pref]
[    0.169920] pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
[    0.169921] pci_bus 0000:03: resource 1 [mem 0x80000000-0x801fffff]
[    0.169923] pci_bus 0000:03: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[    0.169925] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.169927] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[    0.169928] pci_bus 0000:02: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
[    0.169930] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7 window]
[    0.169932] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff window]
[    0.169934] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.169936] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.169937] pci_bus 0000:04: resource 8 [mem 0x80000000-0xffffffff window]
[    0.169962] NET: Registered protocol family 2
[    0.170111] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.170122] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.170141] TCP: Hash tables configured (established 8192 bind 8192)
[    0.170164] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.170170] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.170208] NET: Registered protocol family 1
[    0.170711] pci 0000:01:00.0: Video device with shadowed ROM
[    0.170720] PCI: CLS 32 bytes, default 64
[    0.170765] Trying to unpack rootfs image as initramfs...
[    0.650574] Freeing initrd memory: 31704K (f4204000 - f60fa000)
[    0.650784] microcode: CPU0 sig=0x1067a, pf=0x1, revision=0xa0b
[    0.650788] microcode: CPU1 sig=0x1067a, pf=0x1, revision=0xa0b
[    0.650870] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.650965] Scanning for low memory corruption every 60 seconds
[    0.651294] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.651334] Initialise system trusted keyring
[    0.651361] audit: initializing netlink subsys (disabled)
[    0.651383] audit: type=2000 audit(1453564195.648:1): initialized
[    0.651674] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.653581] zpool: loaded
[    0.653583] zbud: loaded
[    0.653649] VFS: Disk quotas dquot_6.6.0
[    0.653691] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.654193] fuse init (API version 7.23)
[    0.654354] Key type big_key registered
[    0.654585] Key type asymmetric registered
[    0.654588] Asymmetric key parser 'x509' registered
[    0.654602] bounce: pool size: 64 pages
[    0.654638] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.654668] io scheduler noop registered
[    0.654671] io scheduler deadline registered (default)
[    0.654708] io scheduler cfq registered
[    0.654941] pcieport 0000:00:1c.0: enabling device (0104 -> 0107)
[    0.655046] pcieport 0000:00:1c.1: enabling device (0106 -> 0107)
[    0.655167] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.655175] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.655217] intel_idle: does not run on family 6 model 23
[    0.655301] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.655306] ACPI: Power Button [PWRB]
[    0.655351] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.655353] ACPI: Power Button [PWRF]
[    0.655504] GHES: HEST is not enabled!
[    0.655526] isapnp: Scanning for PnP cards...
[    0.655595] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.675988] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.677566] Linux agpgart interface v0.103
[    0.680001] brd: module loaded
[    0.681085] loop: module loaded
[    0.681224] ata_piix 0000:00:1f.1: version 2.13
[    0.688015] scsi host0: ata_piix
[    0.688096] scsi host1: ata_piix
[    0.688141] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    0.688143] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    0.688198] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.689157] scsi host2: ata_piix
[    0.689231] scsi host3: ata_piix
[    0.689274] ata3: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 19
[    0.689276] ata4: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 19
[    0.689361] libphy: Fixed MDIO Bus: probed
[    0.689364] tun: Universal TUN/TAP device driver, 1.6
[    0.689365] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.689403] PPP generic driver version 2.4.2
[    0.689467] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.689471] ehci-pci: EHCI PCI platform driver
[    0.689545] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.689551] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.689561] ehci-pci 0000:00:1d.7: debug port 1
[    0.693470] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[    0.693482] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfbffbc00
[    0.704011] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.704062] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.704064] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.704066] usb usb1: Product: EHCI Host Controller
[    0.704068] usb usb1: Manufacturer: Linux 4.2.0-23-generic ehci_hcd
[    0.704069] usb usb1: SerialNumber: 0000:00:1d.7
[    0.704183] hub 1-0:1.0: USB hub found
[    0.704190] hub 1-0:1.0: 8 ports detected
[    0.704521] ehci-platform: EHCI generic platform driver
[    0.704531] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.704534] ohci-pci: OHCI PCI platform driver
[    0.704546] ohci-platform: OHCI generic platform driver
[    0.704555] uhci_hcd: USB Universal Host Controller Interface driver
[    0.704612] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.704617] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.704622] uhci_hcd 0000:00:1d.0: detected 2 ports
[    0.704638] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d480
[    0.704681] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    0.704683] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.704685] usb usb2: Product: UHCI Host Controller
[    0.704686] usb usb2: Manufacturer: Linux 4.2.0-23-generic uhci_hcd
[    0.704688] usb usb2: SerialNumber: 0000:00:1d.0
[    0.704793] hub 2-0:1.0: USB hub found
[    0.704800] hub 2-0:1.0: 2 ports detected
[    0.704964] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.704969] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.704973] uhci_hcd 0000:00:1d.1: detected 2 ports
[    0.704989] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d800
[    0.705031] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.705033] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.705035] usb usb3: Product: UHCI Host Controller
[    0.705036] usb usb3: Manufacturer: Linux 4.2.0-23-generic uhci_hcd
[    0.705038] usb usb3: SerialNumber: 0000:00:1d.1
[    0.705142] hub 3-0:1.0: USB hub found
[    0.705149] hub 3-0:1.0: 2 ports detected
[    0.705310] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.705316] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.705321] uhci_hcd 0000:00:1d.2: detected 2 ports
[    0.705341] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d880
[    0.705383] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.705385] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.705387] usb usb4: Product: UHCI Host Controller
[    0.705388] usb usb4: Manufacturer: Linux 4.2.0-23-generic uhci_hcd
[    0.705390] usb usb4: SerialNumber: 0000:00:1d.2
[    0.705492] hub 4-0:1.0: USB hub found
[    0.705498] hub 4-0:1.0: 2 ports detected
[    0.705660] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.705665] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.705671] uhci_hcd 0000:00:1d.3: detected 2 ports
[    0.705691] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000dc00
[    0.705733] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.705735] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.705737] usb usb5: Product: UHCI Host Controller
[    0.705739] usb usb5: Manufacturer: Linux 4.2.0-23-generic uhci_hcd
[    0.705740] usb usb5: SerialNumber: 0000:00:1d.3
[    0.705843] hub 5-0:1.0: USB hub found
[    0.705849] hub 5-0:1.0: 2 ports detected
[    0.706016] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    0.708811] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.708815] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.708946] mousedev: PS/2 mouse device common for all mice
[    0.709071] rtc_cmos 00:01: RTC can wake from S4
[    0.709173] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    0.709192] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.709203] i2c /dev entries driver
[    0.709255] device-mapper: uevent: version 1.0.3
[    0.709316] device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
[    0.709341] platform eisa.0: Probing EISA bus 0
[    0.709344] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    0.709346] platform eisa.0: Cannot allocate resource for EISA slot 1
[    0.709348] platform eisa.0: Cannot allocate resource for EISA slot 2
[    0.709349] platform eisa.0: Cannot allocate resource for EISA slot 3
[    0.709351] platform eisa.0: Cannot allocate resource for EISA slot 4
[    0.709353] platform eisa.0: Cannot allocate resource for EISA slot 5
[    0.709354] platform eisa.0: Cannot allocate resource for EISA slot 6
[    0.709356] platform eisa.0: Cannot allocate resource for EISA slot 7
[    0.709358] platform eisa.0: Cannot allocate resource for EISA slot 8
[    0.709359] platform eisa.0: EISA: Detected 0 cards
[    0.709374] cpufreq-nforce2: No nForce2 chipset.
[    0.709381] ledtrig-cpu: registered to indicate activity on CPUs
[    0.709391] PCCT header not found.
[    0.709619] NET: Registered protocol family 10
[    0.709831] NET: Registered protocol family 17
[    0.709843] Key type dns_resolver registered
[    0.710020] Using IPI No-Shortcut mode
[    0.710138] Loading compiled-in X.509 certificates
[    0.712922] Loaded X.509 cert 'Build time autogenerated kernel key: 7524d330e7ef0d0b904ac867138330e3a458cbf9'
[    0.712934] registered taskstats version 1
[    0.712949] zswap: loading zswap
[    0.712951] zswap: using zbud pool
[    0.712955] zswap: using lzo compressor
[    0.715015] Key type trusted registered
[    0.718382] Key type encrypted registered
[    0.718386] AppArmor: AppArmor sha1 policy hashing enabled
[    0.718389] ima: No TPM chip found, activating TPM-bypass!
[    0.718409] evm: HMAC attrs: 0x1
[    0.718610]   Magic number: 0:77:842
[    0.718674] rtc_cmos 00:01: setting system clock to 2016-01-23 15:49:56 UTC (1453564196)
[    0.718913] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.718914] EDD information not available.
[    0.718965] PM: Hibernation image not present or could not be loaded.
[    0.735510] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    0.870093] ata3.01: NODEV after polling detection
[    0.876109] ata3.00: ATAPI: HL-DT-STDVDRRW GSA-H30L, S655, max UDMA/33
[    0.892109] ata3.00: configured for UDMA/33
[    0.897439] ata4.00: ATA-8: MAXTOR STM3320613AS, MC1H, max UDMA/133
[    0.897441] ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    0.955489] ata4.00: configured for UDMA/133
[    1.008284] isapnp: No Plug & Play device found
[    1.010189] scsi 2:0:0:0: CD-ROM            HL-DT-ST DVDRRW GSA-H30L  S655 PQ: 0 ANSI: 5
[    1.019049] sr 2:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.019053] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.019197] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    1.019263] sr 2:0:0:0: Attached scsi generic sg0 type 5
[    1.019355] scsi 3:0:0:0: Direct-Access     ATA      MAXTOR STM332061 MC1H PQ: 0 ANSI: 5
[    1.019494] sd 3:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    1.019521] sd 3:0:0:0: Attached scsi generic sg1 type 0
[    1.019542] sd 3:0:0:0: [sda] Write Protect is off
[    1.019544] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.019566] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.049945]  sda: sda1 sda2 < sda5 >
[    1.050258] sd 3:0:0:0: [sda] Attached SCSI disk
[    1.050537] Freeing unused kernel memory: 928K (c1b16000 - c1bfe000)
[    1.050586] Write protecting the kernel text: 7580k
[    1.050611] Write protecting the kernel read-only data: 3024k
[    1.050612] NX-protecting the kernel data: 4708k
[    1.060454] random: systemd-udevd urandom read with 10 bits of entropy available
[    1.110610] atl1 0000:02:00.0: version 2.1.3
[    1.115702] Floppy drive(s): fd0 is 1.44M
[    1.132038] FDC 0 is a post-1991 82077
[    1.200027] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[    1.204863] atl1 0000:02:00.0 enp2s0: renamed from eth0
[    1.276048] usb 1-7: new high-speed USB device number 3 using ehci-pci
[    1.410046] usb 1-7: New USB device found, idVendor=058f, idProduct=6362
[    1.410050] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.410053] usb 1-7: Product: Mass Storage Device
[    1.410055] usb 1-7: Manufacturer: Generic
[    1.410058] usb 1-7: SerialNumber: 058F312D81B
[    1.542047] usb-storage 1-7:1.0: USB Mass Storage device detected
[    1.542153] scsi host4: usb-storage 1-7:1.0
[    1.542226] usbcore: registered new interface driver usb-storage
[    1.545616] usbcore: registered new interface driver uas
[    1.578050] usb 3-1: New USB device found, idVendor=1532, idProduct=0040
[    1.578054] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.578057] usb 3-1: Product: Razer Naga 2014
[    1.578059] usb 3-1: Manufacturer: Razer
[    1.587626] hidraw: raw HID events driver (C) Jiri Kosina
[    1.599367] usbcore: registered new interface driver usbhid
[    1.599368] usbhid: USB HID core driver
[    1.604260] input: Razer Razer Naga 2014 as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/0003:1532:0040.0001/input/input5
[    1.604553] hid-generic 0003:1532:0040.0001: input,hidraw0: USB HID v1.11 Mouse [Razer Razer Naga 2014] on usb-0000:00:1d.1-1/input0
[    1.610241] input: Razer Razer Naga 2014 as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/0003:1532:0040.0002/input/input6
[    1.648014] tsc: Refined TSC clocksource calibration: 2996.999 MHz
[    1.648018] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b33329c000, max_idle_ns: 440795289802 ns
[    1.664120] hid-generic 0003:1532:0040.0002: input,hidraw1: USB HID v1.11 Keyboard [Razer Razer Naga 2014] on usb-0000:00:1d.1-1/input1
[    1.666165] input: Razer Razer Naga 2014 as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.2/0003:1532:0040.0003/input/input7
[    1.720123] hid-generic 0003:1532:0040.0003: input,hidraw2: USB HID v1.11 Keyboard [Razer Razer Naga 2014] on usb-0000:00:1d.1-1/input2
[    2.362039] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[    2.540857] scsi 4:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
[    2.541503] scsi 4:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
[    2.542099] scsi 4:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
[    2.542727] scsi 4:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
[    2.543269] sd 4:0:0:0: Attached scsi generic sg2 type 0
[    2.544734] sd 4:0:0:1: Attached scsi generic sg3 type 0
[    2.544899] sd 4:0:0:2: Attached scsi generic sg4 type 0
[    2.545867] sd 4:0:0:3: Attached scsi generic sg5 type 0
[    2.571096] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[    2.572349] sd 4:0:0:1: [sdc] Attached SCSI removable disk
[    2.573589] sd 4:0:0:2: [sdd] Attached SCSI removable disk
[    2.574214] sd 4:0:0:3: [sde] Attached SCSI removable disk
[    2.648059] clocksource: Switched to clocksource tsc
[    3.882933] random: nonblocking pool is initialized
[    6.403868] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    7.112507] systemd[1]: Failed to insert module 'kdbus': Function not implemented
[    7.218805] systemd[1]: systemd 225 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[    7.218921] systemd[1]: Detected architecture x86.
[    7.230895] systemd[1]: Set hostname to <Liyarin-PC>.
[    7.722861] systemd[1]: Reached target User and Group Name Lookups.
[    7.722909] systemd[1]: Reached target Remote File Systems (Pre).
[    7.722938] systemd[1]: Created slice Root Slice.
[    7.722964] systemd[1]: Listening on fsck to fsckd communication Socket.
[    7.723039] systemd[1]: Created slice User and Session Slice.
[    7.723074] systemd[1]: Listening on Journal Socket (/dev/log).
[    7.723104] systemd[1]: Listening on udev Control Socket.
[    7.723169] systemd[1]: Listening on Journal Audit Socket.
[    7.723206] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    7.723277] systemd[1]: Created slice System Slice.
[    7.723295] systemd[1]: Reached target Slices.
[    7.723809] systemd[1]: Starting Increase datagram queue length...
[    7.723851] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    7.723867] systemd[1]: Reached target Encrypted Volumes.
[    7.723918] systemd[1]: Listening on Journal Socket.
[    7.724451] systemd[1]: Mounting Debug File System...
[    7.831763] systemd[1]: Starting Load Kernel Modules...
[    7.832349] systemd[1]: Started Braille Device Support.
[    7.832984] systemd[1]: Started Read required files in advance.
[    7.833599] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    7.834124] systemd[1]: Starting Setup Virtual Console...
[    7.834649] systemd[1]: Starting Uncomplicated firewall...
[    7.835199] systemd[1]: Mounting Huge Pages File System...
[    7.835309] systemd[1]: Created slice system-getty.slice.
[    7.835461] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    7.961711] systemd[1]: Listening on udev Kernel Socket.
[    7.962229] systemd[1]: Starting udev Coldplug all Devices...
[    7.962734] systemd[1]: Mounting POSIX Message Queue File System...
[    7.985402] systemd[1]: Started Setup Virtual Console.
[    8.110460] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    8.111055] systemd[1]: Starting Create Static Device Nodes in /dev...
[    8.219636] systemd[1]: Started Uncomplicated firewall.
[    8.392542] systemd[1]: Mounted Debug File System.
[    8.392571] systemd[1]: Mounted Huge Pages File System.
[    8.392589] systemd[1]: Mounted POSIX Message Queue File System.
[    8.392784] systemd[1]: Started Increase datagram queue length.
[    8.398379] systemd[1]: Listening on Syslog Socket.
[    8.398992] systemd[1]: Starting Journal Service...
[    8.421444] lp: driver loaded but no devices found
[    8.446185] systemd[1]: Started udev Coldplug all Devices.
[    8.477628] ppdev: user-space parallel port driver
[    8.523121] parport_pc 00:03: reported by Plug and Play ACPI
[    8.523201] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[    8.620124] lp0: using parport0 (interrupt-driven).
[    8.656709] systemd[1]: Started Load Kernel Modules.
[    8.657391] systemd[1]: Starting Apply Kernel Variables...
[    8.657921] systemd[1]: Mounting FUSE Control File System...
[    8.661213] systemd[1]: Mounted FUSE Control File System.
[    9.049791] systemd[1]: Started Journal Service.
[    9.500763] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    9.834151] systemd-journald[228]: Received request to flush runtime journal from PID 1
[   10.307283] intel_rng: FWH not detected
[   10.353667] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   10.719842] leds_ss4200: no LED devices found
[   11.063731] [drm] Initialized drm 1.1.0 20060810
[   11.236496] gpio_ich: GPIO from 462 to 511 on gpio_ich
[   12.181798] snd_hda_intel 0000:01:00.1: Disabling MSI
[   12.181806] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[   12.255342] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC662 rev1: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[   12.255346] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   12.255348] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   12.255349] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   12.255351] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
[   12.255353] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   12.255355] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[   12.255357] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[   12.255358] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[   12.265326] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   12.267454] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   12.267527] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   12.267593] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   12.267658] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   13.056491] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[   13.056567] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[   13.056638] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[   13.056704] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[   13.091208] nvidia: module license 'NVIDIA' taints kernel.
[   13.091211] Disabling lock debugging due to kernel taint
[   13.099330] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[   13.104328] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   13.104896] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
[   13.104901] NVRM: loading NVIDIA UNIX x86 Kernel Module  352.63  Sat Nov  7 20:28:52 PST 2015
[   13.583788] Adding 2095100k swap on /dev/sda5.  Priority:-1 extents:1 across:2095100k FS
[   13.716161] audit: type=1400 audit(1453564209.493:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=477 comm="apparmor_parser"
[   13.716168] audit: type=1400 audit(1453564209.493:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=477 comm="apparmor_parser"
[   13.739273] audit: type=1400 audit(1453564209.513:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=477 comm="apparmor_parser"
[   13.739280] audit: type=1400 audit(1453564209.513:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=477 comm="apparmor_parser"
[   13.739285] audit: type=1400 audit(1453564209.513:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=477 comm="apparmor_parser"
[   13.739290] audit: type=1400 audit(1453564209.513:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=477 comm="apparmor_parser"
[   13.777649] audit: type=1400 audit(1453564209.553:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=477 comm="apparmor_parser"
[   13.777657] audit: type=1400 audit(1453564209.553:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=477 comm="apparmor_parser"
[   13.777662] audit: type=1400 audit(1453564209.553:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=477 comm="apparmor_parser"
[   13.777667] audit: type=1400 audit(1453564209.553:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=477 comm="apparmor_parser"
[   19.790419] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   19.790718] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   21.021438] atl1 0000:02:00.0: enp2s0 link is up 1000 Mbps full duplex
[   21.021453] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[14267.828377] perf interrupt took too long (2510 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[14913.468345] blk_update_request: I/O error, dev fd0, sector 0
[14913.468351] floppy: error -5 while reading block 0
[14925.620301] blk_update_request: I/O error, dev fd0, sector 0
[14925.620307] floppy: error -5 while reading block 0
[18838.788739] sr 2:0:0:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[18838.788745] sr 2:0:0:0: [sr0] tag#0 Sense Key : Not Ready [current]
[18838.788750] sr 2:0:0:0: [sr0] tag#0 Add. Sense: Medium not present
[18838.788754] sr 2:0:0:0: [sr0] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00
[18838.788758] blk_update_request: I/O error, dev sr0, sector 0
[18838.788776] sr 2:0:0:0: [sr0] unaligned transfer
[18838.788785] sr 2:0:0:0: [sr0] unaligned transfer
[18838.788792] sr 2:0:0:0: [sr0] unaligned transfer
[18838.788799] sr 2:0:0:0: [sr0] unaligned transfer
[18838.788806] sr 2:0:0:0: [sr0] unaligned transfer
[18838.788812] sr 2:0:0:0: [sr0] unaligned transfer
[18838.788818] sr 2:0:0:0: [sr0] unaligned transfer
[18838.788825] sr 2:0:0:0: [sr0] unaligned transfer
[22934.884018] usb 4-1: new full-speed USB device number 2 using uhci_hcd
[22935.241028] usb 4-1: config 1 has an invalid interface number: 1 but max is 0
[22935.241032] usb 4-1: config 1 has no interface number 0
[22935.268024] usb 4-1: New USB device found, idVendor=1b1c, idProduct=0a0b
[22935.268027] usb 4-1: New USB device strings: Mfr=2, Product=3, SerialNumber=0
[22935.268029] usb 4-1: Product: Vengeance 2100 Headset Battery Charger
[22935.268031] usb 4-1: Manufacturer: Corsair
[22935.314154] input: Corsair Vengeance 2100 Headset Battery Charger as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.1/0003:1B1C:0A0B.0004/input/input17
[22935.368221] hid-generic 0003:1B1C:0A0B.0004: input,hiddev0,hidraw3: USB HID v1.11 Device [Corsair Vengeance 2100 Headset Battery Charger] on usb-0000:00:1d.2-1/input1
[22935.952062] usb 4-1: USB disconnect, device number 2
[22937.844020] usb 4-2: new full-speed USB device number 3 using uhci_hcd
[22938.201033] usb 4-2: config 1 has an invalid interface number: 1 but max is 0
[22938.201039] usb 4-2: config 1 has no interface number 0
[22938.228032] usb 4-2: New USB device found, idVendor=1b1c, idProduct=0a0b
[22938.228036] usb 4-2: New USB device strings: Mfr=2, Product=3, SerialNumber=0
[22938.228039] usb 4-2: Product: Vengeance 2100 Headset Battery Charger
[22938.228042] usb 4-2: Manufacturer: Corsair
[22938.275143] input: Corsair Vengeance 2100 Headset Battery Charger as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.1/0003:1B1C:0A0B.0005/input/input18
[22938.329561] hid-generic 0003:1B1C:0A0B.0005: input,hiddev0,hidraw3: USB HID v1.11 Device [Corsair Vengeance 2100 Headset Battery Charger] on usb-0000:00:1d.2-2/input1
[22951.364018] usb 2-1: new full-speed USB device number 2 using uhci_hcd
[22952.138027] usb 2-1: New USB device found, idVendor=1b1c, idProduct=0a0a
[22952.138032] usb 2-1: New USB device strings: Mfr=3, Product=4, SerialNumber=0
[22952.138035] usb 2-1: Product: Vengeance 2100
[22952.138038] usb 2-1: Manufacturer: Corsair
[22952.160136] input: Corsair Vengeance 2100 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.3/0003:1B1C:0A0A.0006/input/input19
[22952.216442] hid-generic 0003:1B1C:0A0A.0006: input,hiddev0,hidraw4: USB HID v1.11 Device [Corsair Vengeance 2100] on usb-0000:00:1d.0-1/input3
[22952.526303] usbcore: registered new interface driver snd-usb-audio
[22977.816017] usb 1-2: new high-speed USB device number 7 using ehci-pci
[22977.949270] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608
[22977.949274] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[22977.949277] usb 1-2: Product: USB2.0 Hub
[22977.949710] hub 1-2:1.0: USB hub found
[22977.950442] hub 1-2:1.0: 4 ports detected
[22978.224021] usb 1-2.2: new high-speed USB device number 8 using ehci-pci
[22978.319766] usb 1-2.2: New USB device found, idVendor=0930, idProduct=6545
[22978.319770] usb 1-2.2: New USB device strings: Mfr=0, Product=2, SerialNumber=3
[22978.319773] usb 1-2.2: Product: USB Flash Memory
[22978.319776] usb 1-2.2: SerialNumber: 0B3043700071699D
[22978.320707] usb-storage 1-2.2:1.0: USB Mass Storage device detected
[22978.321567] scsi host5: usb-storage 1-2.2:1.0
[22979.320533] scsi 5:0:0:0: Direct-Access              USB Flash Memory 5.00 PQ: 0 ANSI: 0 CCS
[22979.320914] sd 5:0:0:0: Attached scsi generic sg6 type 0
[22981.267376] sd 5:0:0:0: [sdf] 2013184 512-byte logical blocks: (1.03 GB/983 MiB)
[22981.267992] sd 5:0:0:0: [sdf] Write Protect is off
[22981.267996] sd 5:0:0:0: [sdf] Mode Sense: 23 00 00 00
[22981.269372] sd 5:0:0:0: [sdf] No Caching mode page found
[22981.269377] sd 5:0:0:0: [sdf] Assuming drive cache: write through
[22981.274628]  sdf: sdf1
[22981.277249] sd 5:0:0:0: [sdf] Attached SCSI removable disk
[22984.886208] usb 1-2.2: USB disconnect, device number 8
[22985.984018] usb 1-2.4: new high-speed USB device number 9 using ehci-pci
[22986.079943] usb 1-2.4: New USB device found, idVendor=0930, idProduct=6545
[22986.079948] usb 1-2.4: New USB device strings: Mfr=0, Product=2, SerialNumber=3
[22986.079951] usb 1-2.4: Product: USB Flash Memory
[22986.079953] usb 1-2.4: SerialNumber: 0B3043700071699D
[22986.080898] usb-storage 1-2.4:1.0: USB Mass Storage device detected
[22986.081351] scsi host6: usb-storage 1-2.4:1.0
[22987.080586] scsi 6:0:0:0: Direct-Access              USB Flash Memory 5.00 PQ: 0 ANSI: 0 CCS
[22987.081546] sd 6:0:0:0: Attached scsi generic sg6 type 0
[22987.132023] usb 1-2.1: new low-speed USB device number 10 using ehci-pci
[22987.288307] usb 1-2.1: New USB device found, idVendor=046d, idProduct=c219
[22987.288311] usb 1-2.1: New USB device strings: Mfr=3, Product=1, SerialNumber=0
[22987.288314] usb 1-2.1: Product: Logitech Cordless RumblePad 2
[22987.288316] usb 1-2.1: Manufacturer: Logitech
[22987.295817] sd 6:0:0:0: [sdf] 2013184 512-byte logical blocks: (1.03 GB/983 MiB)
[22987.296438] sd 6:0:0:0: [sdf] Write Protect is off
[22987.296442] sd 6:0:0:0: [sdf] Mode Sense: 23 00 00 00
[22987.297060] sd 6:0:0:0: [sdf] No Caching mode page found
[22987.297064] sd 6:0:0:0: [sdf] Assuming drive cache: write through
[22987.300696]  sdf: sdf1
[22987.303310] sd 6:0:0:0: [sdf] Attached SCSI removable disk
[22987.447801] input: Logitech Logitech Cordless RumblePad 2 as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2.1/1-2.1:1.0/0003:046D:C219.0007/input/input20
[22987.500218] logitech 0003:046D:C219.0007: input,hidraw5: USB HID v1.10 Gamepad [Logitech Logitech Cordless RumblePad 2] on usb-0000:00:1d.7-2.1/input0
[22987.500223] hid_logitech: Force feedback for Logitech force feedback devices by Johann Deneux <johann.deneux@it.uu.se>
[23006.076015] usb 1-2.2: new high-speed USB device number 11 using ehci-pci
[23006.385749] usb 1-2.2: New USB device found, idVendor=18ec, idProduct=3399
[23006.385754] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[23006.385757] usb 1-2.2: Product: USB2.0 PC CAMERA
[23006.385759] usb 1-2.2: Manufacturer: ARKMICRO
[23006.388156] usb 1-2.2: 3:1: cannot get freq at ep 0x82
[23006.393496] usb 1-2.2: Warning! Unlikely big volume range (=11903), cval->res is probably wrong.
[23006.393500] usb 1-2.2: [2] FU [Mic Capture Volume] ch = 2, val = 384/12287/1
[23006.460886] usb 1-2.2: 3:1: cannot get freq at ep 0x82
[23006.461123] usb 1-2.2: 3:1: cannot get freq at ep 0x82
[23006.509375] usb 1-2.2: 3:1: cannot get freq at ep 0x82
[23006.509870] usb 1-2.2: 3:1: cannot get freq at ep 0x82
[23006.549533] media: Linux media interface: v0.10
[23006.626108] Linux video capture interface: v2.00
[23007.118412] uvcvideo: Found UVC 1.00 device USB2.0 PC CAMERA (18ec:3399)
[23007.126879] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[23007.127672] input: USB2.0 PC CAMERA as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2.2/1-2.2:1.0/input/input21
[23007.127748] usbcore: registered new interface driver uvcvideo
[23007.127750] USB Video Class driver (1.1.1)
[23039.413689] usb 1-2.4: USB disconnect, device number 9
[23039.508077] FAT-fs (sdf1): unable to read boot sector to mark fs as dirty
[23047.580019] usb 1-2.3: new high-speed USB device number 12 using ehci-pci
[23047.672859] usb 1-2.3: New USB device found, idVendor=152d, idProduct=2329
[23047.672863] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[23047.672866] usb 1-2.3: Product: USB to ATA/ATAPI bridge
[23047.672869] usb 1-2.3: Manufacturer: JMicron
[23047.672871] usb 1-2.3: SerialNumber: 29210AFFFFFF
[23047.673395] usb-storage 1-2.3:1.0: USB Mass Storage device detected
[23047.674012] usb-storage 1-2.3:1.0: Quirks match for vid 152d pid 2329: 8020
[23047.674034] scsi host7: usb-storage 1-2.3:1.0
[23047.685897] usb 1-2: USB disconnect, device number 7
[23047.685901] usb 1-2.1: USB disconnect, device number 10
[23047.712293] usb 1-2.2: USB disconnect, device number 11
[23047.748672] usb 1-2.3: USB disconnect, device number 12
[23047.992017] usb 1-2: new high-speed USB device number 13 using ehci-pci
[23048.332017] usb 1-2: new high-speed USB device number 14 using ehci-pci
[23048.784020] usb 2-2: new full-speed USB device number 3 using uhci_hcd
[23048.928109] usb 2-2: not running at top speed; connect to a high speed hub
[23048.945109] usb 2-2: New USB device found, idVendor=05e3, idProduct=0608
[23048.945113] usb 2-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[23048.945116] usb 2-2: Product: USB2.0 Hub
[23048.949176] hub 2-2:1.0: USB hub found
[23048.951108] hub 2-2:1.0: 4 ports detected
[23049.232022] usb 2-2.1: new low-speed USB device number 4 using uhci_hcd
[23049.401105] usb 2-2.1: New USB device found, idVendor=046d, idProduct=c219
[23049.401109] usb 2-2.1: New USB device strings: Mfr=3, Product=1, SerialNumber=0
[23049.401112] usb 2-2.1: Product: Logitech Cordless RumblePad 2
[23049.401115] usb 2-2.1: Manufacturer: Logitech
[23049.461204] input: Logitech Logitech Cordless RumblePad 2 as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.1/2-2.1:1.0/0003:046D:C219.0008/input/input22
[23049.516207] logitech 0003:046D:C219.0008: input,hidraw5: USB HID v1.10 Gamepad [Logitech Logitech Cordless RumblePad 2] on usb-0000:00:1d.0-2.1/input0
[23049.516212] hid_logitech: Force feedback for Logitech force feedback devices by Johann Deneux <johann.deneux@it.uu.se>
[23049.592031] usb 2-2.2: new full-speed USB device number 5 using uhci_hcd
[23049.933103] usb 2-2.2: New USB device found, idVendor=18ec, idProduct=3399
[23049.933108] usb 2-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[23049.933111] usb 2-2.2: Product: USB2.0 PC CAMERA
[23049.933114] usb 2-2.2: Manufacturer: ARKMICRO
[23049.936432] uvcvideo: Found UVC 1.00 device USB2.0 PC CAMERA (18ec:3399)
[23049.947097] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[23049.948256] input: USB2.0 PC CAMERA as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.2/2-2.2:1.0/input/input23
[23049.957098] usb 2-2.2: 3:1: cannot get freq at ep 0x82
[23049.986098] usb 2-2.2: Warning! Unlikely big volume range (=11903), cval->res is probably wrong.
[23049.986102] usb 2-2.2: [2] FU [Mic Capture Volume] ch = 2, val = 384/12287/1
[23050.037154] usb 2-2.2: 3:1: cannot get freq at ep 0x82
[23050.039101] usb 2-2.2: 3:1: cannot get freq at ep 0x82
[23050.056099] usb 2-2.2: 3:1: cannot get freq at ep 0x82
[23050.058097] usb 2-2.2: 3:1: cannot get freq at ep 0x82
[23050.064019] usb 2-2.3: new full-speed USB device number 6 using uhci_hcd
[23050.136098] retire_capture_urb: 24 callbacks suppressed
[23050.280116] usb 2-2: USB disconnect, device number 3
[23050.281091] usb 2-2.2: cannot submit urb (err = -19)
[23050.284031] usb 2-2.2: 3:1: cannot set freq 48000 to ep 0x82
[23050.552021] usb 2-2.3: device not accepting address 6, error -71
[23050.552057] usb 2-2.1: USB disconnect, device number 4
[23050.582240] usb 2-2.2: USB disconnect, device number 5
[23050.856017] usb 2-2: new full-speed USB device number 10 using uhci_hcd
[23051.001093] usb 2-2: not running at top speed; connect to a high speed hub
[23051.018091] usb 2-2: New USB device found, idVendor=05e3, idProduct=0608
[23051.018094] usb 2-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[23051.018098] usb 2-2: Product: USB2.0 Hub
[23051.022156] hub 2-2:1.0: USB hub found
[23051.024075] hub 2-2:1.0: 4 ports detected
[23051.308016] usb 2-2.1: new low-speed USB device number 11 using uhci_hcd
[23051.477087] usb 2-2.1: New USB device found, idVendor=046d, idProduct=c219
[23051.477091] usb 2-2.1: New USB device strings: Mfr=3, Product=1, SerialNumber=0
[23051.477094] usb 2-2.1: Product: Logitech Cordless RumblePad 2
[23051.477097] usb 2-2.1: Manufacturer: Logitech
[23051.537188] input: Logitech Logitech Cordless RumblePad 2 as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.1/2-2.1:1.0/0003:046D:C219.0009/input/input24
[23051.592195] logitech 0003:046D:C219.0009: input,hidraw5: USB HID v1.10 Gamepad [Logitech Logitech Cordless RumblePad 2] on usb-0000:00:1d.0-2.1/input0
[23051.592199] hid_logitech: Force feedback for Logitech force feedback devices by Johann Deneux <johann.deneux@it.uu.se>
[23051.668026] usb 2-2.2: new full-speed USB device number 12 using uhci_hcd
[23052.008084] usb 2-2.2: New USB device found, idVendor=18ec, idProduct=3399
[23052.008089] usb 2-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[23052.008092] usb 2-2.2: Product: USB2.0 PC CAMERA
[23052.008095] usb 2-2.2: Manufacturer: ARKMICRO
[23052.011164] uvcvideo: Found UVC 1.00 device USB2.0 PC CAMERA (18ec:3399)
[23052.022078] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[23052.023236] input: USB2.0 PC CAMERA as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.2/2-2.2:1.0/input/input25
[23052.032080] usb 2-2.2: 3:1: cannot get freq at ep 0x82
[23052.061079] usb 2-2.2: Warning! Unlikely big volume range (=11903), cval->res is probably wrong.
[23052.061083] usb 2-2.2: [2] FU [Mic Capture Volume] ch = 2, val = 384/12287/1
[23052.108131] usb 2-2.2: 3:1: cannot get freq at ep 0x82
[23052.110079] usb 2-2.2: 3:1: cannot get freq at ep 0x82
[23052.130079] usb 2-2.2: 3:1: cannot get freq at ep 0x82
[23052.132294] usb 2-2.2: 3:1: cannot get freq at ep 0x82
[23052.140021] usb 2-2.3: new full-speed USB device number 13 using uhci_hcd
[23052.244084] usb 2-2.3: not running at top speed; connect to a high speed hub
[23052.268081] usb 2-2.3: New USB device found, idVendor=152d, idProduct=2329
[23052.268084] usb 2-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[23052.268086] usb 2-2.3: Product: USB to ATA/ATAPI bridge
[23052.268088] usb 2-2.3: Manufacturer: JMicron
[23052.268090] usb 2-2.3: SerialNumber: 29210AFFFFFF
[23052.276133] usb-storage 2-2.3:1.0: USB Mass Storage device detected
[23052.276283] usb-storage 2-2.3:1.0: Quirks match for vid 152d pid 2329: 8020
[23052.276299] scsi host8: usb-storage 2-2.3:1.0
[23052.352021] usb 2-2.4: new full-speed USB device number 14 using uhci_hcd
[23052.456082] usb 2-2.4: not running at top speed; connect to a high speed hub
[23052.477082] usb 2-2.4: New USB device found, idVendor=0930, idProduct=6545
[23052.477085] usb 2-2.4: New USB device strings: Mfr=0, Product=2, SerialNumber=3
[23052.477088] usb 2-2.4: Product: USB Flash Memory
[23052.477089] usb 2-2.4: SerialNumber: 0B3043700071699D
[23052.481159] usb-storage 2-2.4:1.0: USB Mass Storage device detected
[23052.481327] scsi host9: usb-storage 2-2.4:1.0
[23053.484099] scsi 9:0:0:0: Direct-Access              USB Flash Memory 5.00 PQ: 0 ANSI: 0 CCS
[23055.318091] scsi 8:0:0:0: Direct-Access     Hitachi  HDS721010CLA332       PQ: 0 ANSI: 2 CCS
[23055.318498] sd 8:0:0:0: Attached scsi generic sg6 type 0
[23055.321808] sd 9:0:0:0: Attached scsi generic sg7 type 0
[23055.918064] sd 9:0:0:0: [sdg] 2013184 512-byte logical blocks: (1.03 GB/983 MiB)
[23055.921065] sd 9:0:0:0: [sdg] Write Protect is off
[23055.921070] sd 9:0:0:0: [sdg] Mode Sense: 23 00 00 00
[23055.924096] sd 9:0:0:0: [sdg] No Caching mode page found
[23055.924101] sd 9:0:0:0: [sdg] Assuming drive cache: write through
[23055.950066]  sdg: sdg1
[23055.967061] sd 9:0:0:0: [sdg] Attached SCSI removable disk
[23060.688023] sd 8:0:0:0: [sdf] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[23060.693012] sd 8:0:0:0: [sdf] Write Protect is off
[23060.693017] sd 8:0:0:0: [sdf] Mode Sense: 28 00 00 00
[23060.698014] sd 8:0:0:0: [sdf] No Caching mode page found
[23060.698019] sd 8:0:0:0: [sdf] Assuming drive cache: write through
[23060.734020]  sdf: sdf1
[23060.783008] sd 8:0:0:0: [sdf] Attached SCSI disk
[23063.037993] FAT-fs (sdg1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[23114.394517] FAT-fs (sdg1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[23452.784058] usb usb4-port2: disabled by hub (EMI?), re-enabling...
[23452.784067] usb 4-2: USB disconnect, device number 3
[23453.056025] usb 4-2: new full-speed USB device number 4 using uhci_hcd
[23453.208944] usb 4-2: config 1 has an invalid interface number: 1 but max is 0
[23453.208949] usb 4-2: config 1 has no interface number 0
[23453.236942] usb 4-2: New USB device found, idVendor=1b1c, idProduct=0a0b
[23453.236946] usb 4-2: New USB device strings: Mfr=2, Product=3, SerialNumber=0
[23453.236949] usb 4-2: Product: Vengeance 2100 Headset Battery Charger
[23453.236952] usb 4-2: Manufacturer: Corsair
[23453.285050] input: Corsair Vengeance 2100 Headset Battery Charger as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.1/0003:1B1C:0A0B.000A/input/input26
[23453.340400] hid-generic 0003:1B1C:0A0B.000A: input,hiddev0,hidraw3: USB HID v1.11 Device [Corsair Vengeance 2100 Headset Battery Charger] on usb-0000:00:1d.2-2/input1
[23454.024064] usb usb4-port2: disabled by hub (EMI?), re-enabling...
[23454.024072] usb 4-2: USB disconnect, device number 4
[23454.304018] usb 4-2: new full-speed USB device number 5 using uhci_hcd
[23454.456832] usb 4-2: config 1 has an invalid interface number: 1 but max is 0
[23454.456837] usb 4-2: config 1 has no interface number 0
[23454.484830] usb 4-2: New USB device found, idVendor=1b1c, idProduct=0a0b
[23454.484835] usb 4-2: New USB device strings: Mfr=2, Product=3, SerialNumber=0
[23454.484838] usb 4-2: Product: Vengeance 2100 Headset Battery Charger
[23454.484840] usb 4-2: Manufacturer: Corsair
[23454.531939] input: Corsair Vengeance 2100 Headset Battery Charger as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.1/0003:1B1C:0A0B.000B/input/input27
[23454.584464] hid-generic 0003:1B1C:0A0B.000B: input,hiddev0,hidraw3: USB HID v1.11 Device [Corsair Vengeance 2100 Headset Battery Charger] on usb-0000:00:1d.2-2/input1
[24542.744067] usb usb4-port2: disabled by hub (EMI?), re-enabling...
[24542.744075] usb 4-2: USB disconnect, device number 5
[24543.020018] usb 4-2: new full-speed USB device number 6 using uhci_hcd
[24543.172136] usb 4-2: config 1 has an invalid interface number: 1 but max is 0
[24543.172141] usb 4-2: config 1 has no interface number 0
[24543.199140] usb 4-2: New USB device found, idVendor=1b1c, idProduct=0a0b
[24543.199144] usb 4-2: New USB device strings: Mfr=2, Product=3, SerialNumber=0
[24543.199146] usb 4-2: Product: Vengeance 2100 Headset Battery Charger
[24543.199148] usb 4-2: Manufacturer: Corsair
[24543.248250] input: Corsair Vengeance 2100 Headset Battery Charger as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.1/0003:1B1C:0A0B.000C/input/input28
[24543.304500] hid-generic 0003:1B1C:0A0B.000C: input,hiddev0,hidraw3: USB HID v1.11 Device [Corsair Vengeance 2100 Headset Battery Charger] on usb-0000:00:1d.2-2/input1
[24543.984063] usb usb4-port2: disabled by hub (EMI?), re-enabling...
[24543.984071] usb 4-2: USB disconnect, device number 6
[24544.260022] usb 4-2: new full-speed USB device number 7 using uhci_hcd
[24544.412099] usb 4-2: config 1 has an invalid interface number: 1 but max is 0
[24544.412104] usb 4-2: config 1 has no interface number 0
[24544.439107] usb 4-2: New USB device found, idVendor=1b1c, idProduct=0a0b
[24544.439111] usb 4-2: New USB device strings: Mfr=2, Product=3, SerialNumber=0
[24544.439114] usb 4-2: Product: Vengeance 2100 Headset Battery Charger
[24544.439117] usb 4-2: Manufacturer: Corsair
[24544.489359] input: Corsair Vengeance 2100 Headset Battery Charger as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.1/0003:1B1C:0A0B.000D/input/input29
[24544.544492] hid-generic 0003:1B1C:0A0B.000D: input,hiddev0,hidraw3: USB HID v1.11 Device [Corsair Vengeance 2100 Headset Battery Charger] on usb-0000:00:1d.2-2/input1
[24996.949596] usb 2-2.2: 3:1: cannot get freq at ep 0x82
[24996.951597] usb 2-2.2: 3:1: cannot get freq at ep 0x82
[25285.256062] usb 4-2: USB disconnect, device number 7
[25786.112755] usb 2-2.4: USB disconnect, device number 14
[25787.592032] usb 2-2.4: new full-speed USB device number 15 using uhci_hcd
[25787.696783] usb 2-2.4: not running at top speed; connect to a high speed hub
[25787.716785] usb 2-2.4: New USB device found, idVendor=0930, idProduct=6545
[25787.716790] usb 2-2.4: New USB device strings: Mfr=0, Product=2, SerialNumber=3
[25787.716793] usb 2-2.4: Product: USB Flash Memory
[25787.716796] usb 2-2.4: SerialNumber: 0B3043700071699D
[25787.720865] usb-storage 2-2.4:1.0: USB Mass Storage device detected
[25787.721040] scsi host10: usb-storage 2-2.4:1.0
[25788.724845] scsi 10:0:0:0: Direct-Access              USB Flash Memory 5.00 PQ: 0 ANSI: 0 CCS
[25788.725887] sd 10:0:0:0: Attached scsi generic sg7 type 0
[25788.948825] sd 10:0:0:0: [sdg] 2013184 512-byte logical blocks: (1.03 GB/983 MiB)
[25788.951814] sd 10:0:0:0: [sdg] Write Protect is off
[25788.951818] sd 10:0:0:0: [sdg] Mode Sense: 23 00 00 00
[25788.954832] sd 10:0:0:0: [sdg] No Caching mode page found
[25788.954836] sd 10:0:0:0: [sdg] Assuming drive cache: write through
[25788.980837]  sdg: sdg1
[25788.995822] sd 10:0:0:0: [sdg] Attached SCSI removable disk
[25796.216996] FAT-fs (sdg1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[33923.887168] show_signal_msg: 136 callbacks suppressed
[33923.887172] gmusicbrowser[9653]: segfault at 125e8c ip b71bc82e sp bf9863b0 error 4 in libgobject-2.0.so.0.4600.1[b719d000+5c000]
[39033.441381] gmusicbrowser[13411]: segfault at 1345ce04 ip b720e82e sp bf9c6e40 error 4 in libgobject-2.0.so.0.4600.1[b71ef000+5c000]
[47602.500029] usb 4-2: new full-speed USB device number 8 using uhci_hcd
[47602.652153] usb 4-2: config 1 has an invalid interface number: 1 but max is 0
[47602.652158] usb 4-2: config 1 has no interface number 0
[47602.680167] usb 4-2: New USB device found, idVendor=1b1c, idProduct=0a0b
[47602.680170] usb 4-2: New USB device strings: Mfr=2, Product=3, SerialNumber=0
[47602.680173] usb 4-2: Product: Vengeance 2100 Headset Battery Charger
[47602.680174] usb 4-2: Manufacturer: Corsair
[47602.727289] input: Corsair Vengeance 2100 Headset Battery Charger as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.1/0003:1B1C:0A0B.000E/input/input30
[47602.783382] hid-generic 0003:1B1C:0A0B.000E: input,hiddev0,hidraw3: USB HID v1.11 Device [Corsair Vengeance 2100 Headset Battery Charger] on usb-0000:00:1d.2-2/input1
[60967.496056] usb usb4-port2: disabled by hub (EMI?), re-enabling...
[60967.496064] usb 4-2: USB disconnect, device number 8
[60967.772025] usb 4-2: new full-speed USB device number 9 using uhci_hcd
[60967.924195] usb 4-2: config 1 has an invalid interface number: 1 but max is 0
[60967.924200] usb 4-2: config 1 has no interface number 0
[60967.951194] usb 4-2: New USB device found, idVendor=1b1c, idProduct=0a0b
[60967.951199] usb 4-2: New USB device strings: Mfr=2, Product=3, SerialNumber=0
[60967.951202] usb 4-2: Product: Vengeance 2100 Headset Battery Charger
[60967.951204] usb 4-2: Manufacturer: Corsair
[60967.998315] input: Corsair Vengeance 2100 Headset Battery Charger as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.1/0003:1B1C:0A0B.000F/input/input31
[60968.052339] hid-generic 0003:1B1C:0A0B.000F: input,hiddev0,hidraw3: USB HID v1.11 Device [Corsair Vengeance 2100 Headset Battery Charger] on usb-0000:00:1d.2-2/input1
[60968.488063] usb usb4-port2: disabled by hub (EMI?), re-enabling...
[60968.488072] usb 4-2: USB disconnect, device number 9
[60968.764022] usb 4-2: new full-speed USB device number 10 using uhci_hcd
[60968.916202] usb 4-2: config 1 has an invalid interface number: 1 but max is 0
[60968.916207] usb 4-2: config 1 has no interface number 0
[60968.944201] usb 4-2: New USB device found, idVendor=1b1c, idProduct=0a0b
[60968.944205] usb 4-2: New USB device strings: Mfr=2, Product=3, SerialNumber=0
[60968.944209] usb 4-2: Product: Vengeance 2100 Headset Battery Charger
[60968.944211] usb 4-2: Manufacturer: Corsair
[60968.991422] input: Corsair Vengeance 2100 Headset Battery Charger as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.1/0003:1B1C:0A0B.0010/input/input32
[60969.044383] hid-generic 0003:1B1C:0A0B.0010: input,hiddev0,hidraw3: USB HID v1.11 Device [Corsair Vengeance 2100 Headset Battery Charger] on usb-0000:00:1d.2-2/input1
[63082.936056] usb usb4-port2: disabled by hub (EMI?), re-enabling...
[63082.936065] usb 4-2: USB disconnect, device number 10
[63083.212019] usb 4-2: new full-speed USB device number 11 using uhci_hcd
[63083.365002] usb 4-2: config 1 has an invalid interface number: 1 but max is 0
[63083.365006] usb 4-2: config 1 has no interface number 0
[63083.392016] usb 4-2: New USB device found, idVendor=1b1c, idProduct=0a0b
[63083.392020] usb 4-2: New USB device strings: Mfr=2, Product=3, SerialNumber=0
[63083.392024] usb 4-2: Product: Vengeance 2100 Headset Battery Charger
[63083.392026] usb 4-2: Manufacturer: Corsair
[63083.439123] input: Corsair Vengeance 2100 Headset Battery Charger as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.1/0003:1B1C:0A0B.0011/input/input33
[63083.492312] hid-generic 0003:1B1C:0A0B.0011: input,hiddev0,hidraw3: USB HID v1.11 Device [Corsair Vengeance 2100 Headset Battery Charger] on usb-0000:00:1d.2-2/input1
[64809.512060] usb usb4-port2: disabled by hub (EMI?), re-enabling...
[64809.512069] usb 4-2: USB disconnect, device number 11
[64809.784024] usb 4-2: new full-speed USB device number 12 using uhci_hcd
[64809.936247] usb 4-2: config 1 has an invalid interface number: 1 but max is 0
[64809.936251] usb 4-2: config 1 has no interface number 0
[64809.964242] usb 4-2: New USB device found, idVendor=1b1c, idProduct=0a0b
[64809.964246] usb 4-2: New USB device strings: Mfr=2, Product=3, SerialNumber=0
[64809.964249] usb 4-2: Product: Vengeance 2100 Headset Battery Charger
[64809.964252] usb 4-2: Manufacturer: Corsair
[64810.013371] input: Corsair Vengeance 2100 Headset Battery Charger as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.1/0003:1B1C:0A0B.0012/input/input34
[64810.068321] hid-generic 0003:1B1C:0A0B.0012: input,hiddev0,hidraw3: USB HID v1.11 Device [Corsair Vengeance 2100 Headset Battery Charger] on usb-0000:00:1d.2-2/input1
[64810.752056] usb usb4-port2: disabled by hub (EMI?), re-enabling...
[64810.752063] usb 4-2: USB disconnect, device number 12
[64811.024017] usb 4-2: new full-speed USB device number 13 using uhci_hcd
[64811.176137] usb 4-2: config 1 has an invalid interface number: 1 but max is 0
[64811.176142] usb 4-2: config 1 has no interface number 0
[64811.204134] usb 4-2: New USB device found, idVendor=1b1c, idProduct=0a0b
[64811.204143] usb 4-2: New USB device strings: Mfr=2, Product=3, SerialNumber=0
[64811.204145] usb 4-2: Product: Vengeance 2100 Headset Battery Charger
[64811.204147] usb 4-2: Manufacturer: Corsair
[64811.252225] input: Corsair Vengeance 2100 Headset Battery Charger as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.1/0003:1B1C:0A0B.0013/input/input35
[64811.308400] hid-generic 0003:1B1C:0A0B.0013: input,hiddev0,hidraw3: USB HID v1.11 Device [Corsair Vengeance 2100 Headset Battery Charger] on usb-0000:00:1d.2-2/input1
[65636.809367] atl1 0000:02:00.0: enp2s0 link is down
[65639.432110] atl1 0000:02:00.0: enp2s0 link is up 1000 Mbps full duplex
[65674.607368] atl1 0000:02:00.0: enp2s0 link is down
[74447.793329] usb 2-2.3: USB disconnect, device number 13
[74461.816018] usb 2-2.3: new full-speed USB device number 16 using uhci_hcd
[74461.920040] usb 2-2.3: not running at top speed; connect to a high speed hub
[74461.944088] usb 2-2.3: New USB device found, idVendor=152d, idProduct=2329
[74461.944092] usb 2-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[74461.944095] usb 2-2.3: Product: USB to ATA/ATAPI bridge
[74461.944098] usb 2-2.3: Manufacturer: JMicron
[74461.944100] usb 2-2.3: SerialNumber: 29210AFFFFFF
[74461.951131] usb-storage 2-2.3:1.0: USB Mass Storage device detected
[74461.951355] usb-storage 2-2.3:1.0: Quirks match for vid 152d pid 2329: 8020
[74461.951376] scsi host11: usb-storage 2-2.3:1.0
[74462.993100] scsi 11:0:0:0: Direct-Access     Hitachi  HDS721010CLA332       PQ: 0 ANSI: 2 CCS
[74462.993847] sd 11:0:0:0: Attached scsi generic sg6 type 0
[74462.998186] sd 11:0:0:0: [sdf] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[74463.003090] sd 11:0:0:0: [sdf] Write Protect is off
[74463.003095] sd 11:0:0:0: [sdf] Mode Sense: 28 00 00 00
[74463.008084] sd 11:0:0:0: [sdf] No Caching mode page found
[74463.008088] sd 11:0:0:0: [sdf] Assuming drive cache: write through
[74463.044096]  sdf: sdf1
[74463.061085] sd 11:0:0:0: [sdf] Attached SCSI disk
[75724.488062] usb usb4-port2: disabled by hub (EMI?), re-enabling...
[75724.488071] usb 4-2: USB disconnect, device number 13
[75724.752023] usb 4-2: new full-speed USB device number 14 using uhci_hcd
[75724.904959] usb 4-2: config 1 has an invalid interface number: 1 but max is 0
[75724.904964] usb 4-2: config 1 has no interface number 0
[75724.930958] usb 4-2: New USB device found, idVendor=1b1c, idProduct=0a0b
[75724.930963] usb 4-2: New USB device strings: Mfr=2, Product=3, SerialNumber=0
[75724.930966] usb 4-2: Product: Vengeance 2100 Headset Battery Charger
[75724.930969] usb 4-2: Manufacturer: Corsair
[75724.980219] input: Corsair Vengeance 2100 Headset Battery Charger as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.1/0003:1B1C:0A0B.0014/input/input36
[75725.036541] hid-generic 0003:1B1C:0A0B.0014: input,hiddev0,hidraw3: USB HID v1.11 Device [Corsair Vengeance 2100 Headset Battery Charger] on usb-0000:00:1d.2-2/input1
[75725.728050] usb usb4-port2: disabled by hub (EMI?), re-enabling...
[75725.728056] usb 4-2: USB disconnect, device number 14
[75725.996023] usb 4-2: new full-speed USB device number 15 using uhci_hcd
[75726.148939] usb 4-2: config 1 has an invalid interface number: 1 but max is 0
[75726.148944] usb 4-2: config 1 has no interface number 0
[75726.175939] usb 4-2: New USB device found, idVendor=1b1c, idProduct=0a0b
[75726.175944] usb 4-2: New USB device strings: Mfr=2, Product=3, SerialNumber=0
[75726.175947] usb 4-2: Product: Vengeance 2100 Headset Battery Charger
[75726.175949] usb 4-2: Manufacturer: Corsair
[75726.223115] input: Corsair Vengeance 2100 Headset Battery Charger as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.1/0003:1B1C:0A0B.0015/input/input37
[75726.276483] hid-generic 0003:1B1C:0A0B.0015: input,hiddev0,hidraw3: USB HID v1.11 Device [Corsair Vengeance 2100 Headset Battery Charger] on usb-0000:00:1d.2-2/input1
[80742.875320] atl1 0000:02:00.0: enp2s0 link is up 1000 Mbps full duplex
[80771.704744] sr 2:0:0:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[80771.704751] sr 2:0:0:0: [sr0] tag#0 Sense Key : Not Ready [current]
[80771.704755] sr 2:0:0:0: [sr0] tag#0 Add. Sense: Medium not present
[80771.704760] sr 2:0:0:0: [sr0] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00
[80771.704763] blk_update_request: I/O error, dev sr0, sector 0
[80771.704782] sr 2:0:0:0: [sr0] unaligned transfer
[80771.704793] sr 2:0:0:0: [sr0] unaligned transfer
[80771.704799] sr 2:0:0:0: [sr0] unaligned transfer
[80771.704806] sr 2:0:0:0: [sr0] unaligned transfer
[80771.704812] sr 2:0:0:0: [sr0] unaligned transfer
[80771.704818] sr 2:0:0:0: [sr0] unaligned transfer
[80771.704824] sr 2:0:0:0: [sr0] unaligned transfer
[80771.704831] sr 2:0:0:0: [sr0] unaligned transfer
[80833.288056] usb usb4-port2: disabled by hub (EMI?), re-enabling...
[80833.288065] usb 4-2: USB disconnect, device number 15
[80833.560034] usb 4-2: new full-speed USB device number 16 using uhci_hcd
[80833.712306] usb 4-2: config 1 has an invalid interface number: 1 but max is 0
[80833.712311] usb 4-2: config 1 has no interface number 0
[80833.741307] usb 4-2: New USB device found, idVendor=1b1c, idProduct=0a0b
[80833.741313] usb 4-2: New USB device strings: Mfr=2, Product=3, SerialNumber=0
[80833.741316] usb 4-2: Product: Vengeance 2100 Headset Battery Charger
[80833.741319] usb 4-2: Manufacturer: Corsair
[80833.789388] input: Corsair Vengeance 2100 Headset Battery Charger as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.1/0003:1B1C:0A0B.0016/input/input38
[80833.844338] hid-generic 0003:1B1C:0A0B.0016: input,hiddev0,hidraw3: USB HID v1.11 Device [Corsair Vengeance 2100 Headset Battery Charger] on usb-0000:00:1d.2-2/input1
[80834.032056] usb usb4-port2: disabled by hub (EMI?), re-enabling...
[80834.032065] usb 4-2: USB disconnect, device number 16
[80834.304022] usb 4-2: new full-speed USB device number 17 using uhci_hcd
[80834.456294] usb 4-2: config 1 has an invalid interface number: 1 but max is 0
[80834.456299] usb 4-2: config 1 has no interface number 0
[80834.483294] usb 4-2: New USB device found, idVendor=1b1c, idProduct=0a0b
[80834.483297] usb 4-2: New USB device strings: Mfr=2, Product=3, SerialNumber=0
[80834.483299] usb 4-2: Product: Vengeance 2100 Headset Battery Charger
[80834.483301] usb 4-2: Manufacturer: Corsair
[80834.530409] input: Corsair Vengeance 2100 Headset Battery Charger as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.1/0003:1B1C:0A0B.0017/input/input39
[80834.584423] hid-generic 0003:1B1C:0A0B.0017: input,hiddev0,hidraw3: USB HID v1.11 Device [Corsair Vengeance 2100 Headset Battery Charger] on usb-0000:00:1d.2-2/input1
[80835.520053] usb usb4-port2: disabled by hub (EMI?), re-enabling...
[80835.520061] usb 4-2: USB disconnect, device number 17
[80835.788024] usb 4-2: new full-speed USB device number 18 using uhci_hcd
[80835.940270] usb 4-2: config 1 has an invalid interface number: 1 but max is 0
[80835.940275] usb 4-2: config 1 has no interface number 0
[80835.967269] usb 4-2: New USB device found, idVendor=1b1c, idProduct=0a0b
[80835.967273] usb 4-2: New USB device strings: Mfr=2, Product=3, SerialNumber=0
[80835.967275] usb 4-2: Product: Vengeance 2100 Headset Battery Charger
[80835.967277] usb 4-2: Manufacturer: Corsair
[80836.014388] input: Corsair Vengeance 2100 Headset Battery Charger as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.1/0003:1B1C:0A0B.0018/input/input40
[80836.068408] hid-generic 0003:1B1C:0A0B.0018: input,hiddev0,hidraw3: USB HID v1.11 Device [Corsair Vengeance 2100 Headset Battery Charger] on usb-0000:00:1d.2-2/input1
[82663.280063] usb usb4-port2: disabled by hub (EMI?), re-enabling...
[82663.280072] usb 4-2: USB disconnect, device number 18
[82663.552110] usb 4-2: new full-speed USB device number 19 using uhci_hcd
[82663.704700] usb 4-2: config 1 has an invalid interface number: 1 but max is 0
[82663.704704] usb 4-2: config 1 has no interface number 0
[82663.731701] usb 4-2: New USB device found, idVendor=1b1c, idProduct=0a0b
[82663.731705] usb 4-2: New USB device strings: Mfr=2, Product=3, SerialNumber=0
[82663.731707] usb 4-2: Product: Vengeance 2100 Headset Battery Charger
[82663.731709] usb 4-2: Manufacturer: Corsair
[82663.777811] input: Corsair Vengeance 2100 Headset Battery Charger as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.1/0003:1B1C:0A0B.0019/input/input41
[82663.832359] hid-generic 0003:1B1C:0A0B.0019: input,hiddev0,hidraw3: USB HID v1.11 Device [Corsair Vengeance 2100 Headset Battery Charger] on usb-0000:00:1d.2-2/input1
[86059.144060] usb usb4-port2: disabled by hub (EMI?), re-enabling...
[86059.144068] usb 4-2: USB disconnect, device number 19
[86059.420026] usb 4-2: new full-speed USB device number 20 using uhci_hcd
[86059.572686] usb 4-2: config 1 has an invalid interface number: 1 but max is 0
[86059.572690] usb 4-2: config 1 has no interface number 0
[86059.600685] usb 4-2: New USB device found, idVendor=1b1c, idProduct=0a0b
[86059.600690] usb 4-2: New USB device strings: Mfr=2, Product=3, SerialNumber=0
[86059.600693] usb 4-2: Product: Vengeance 2100 Headset Battery Charger
[86059.600696] usb 4-2: Manufacturer: Corsair
[86059.648850] input: Corsair Vengeance 2100 Headset Battery Charger as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.1/0003:1B1C:0A0B.001A/input/input42
[86059.704423] hid-generic 0003:1B1C:0A0B.001A: input,hiddev0,hidraw3: USB HID v1.11 Device [Corsair Vengeance 2100 Headset Battery Charger] on usb-0000:00:1d.2-2/input1
[86060.632060] usb usb4-port2: disabled by hub (EMI?), re-enabling...
[86060.632068] usb 4-2: USB disconnect, device number 20
[86060.904030] usb 4-2: new full-speed USB device number 21 using uhci_hcd
[86061.056623] usb 4-2: config 1 has an invalid interface number: 1 but max is 0
[86061.056628] usb 4-2: config 1 has no interface number 0
[86061.084624] usb 4-2: New USB device found, idVendor=1b1c, idProduct=0a0b
[86061.084629] usb 4-2: New USB device strings: Mfr=2, Product=3, SerialNumber=0
[86061.084632] usb 4-2: Product: Vengeance 2100 Headset Battery Charger
[86061.084634] usb 4-2: Manufacturer: Corsair
[86061.133733] input: Corsair Vengeance 2100 Headset Battery Charger as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.1/0003:1B1C:0A0B.001B/input/input43
[86061.188504] hid-generic 0003:1B1C:0A0B.001B: input,hiddev0,hidraw3: USB HID v1.11 Device [Corsair Vengeance 2100 Headset Battery Charger] on usb-0000:00:1d.2-2/input1
[86110.224027] usb 3-2: new full-speed USB device number 3 using uhci_hcd
[86110.410787] usb 3-2: New USB device found, idVendor=03f0, idProduct=3f11
[86110.410792] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[86110.410795] usb 3-2: Product: psc 1310 series
[86110.410797] usb 3-2: Manufacturer: hp
[86110.410800] usb 3-2: SerialNumber: MY525C94B6O2
[86112.581816] usblp 3-2:1.1: usblp2: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x3F11
[86112.581875] usbcore: registered new interface driver usblp
[86117.921276] usblp2: removed
[86117.928702] usblp 3-2:1.1: usblp2: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x3F11
[86447.512142] usb usb4-port2: disabled by hub (EMI?), re-enabling...
[86447.512151] usb 4-2: USB disconnect, device number 21
[86447.788025] usb 4-2: new full-speed USB device number 22 using uhci_hcd
[86447.940808] usb 4-2: config 1 has an invalid interface number: 1 but max is 0
[86447.940812] usb 4-2: config 1 has no interface number 0
[86447.968808] usb 4-2: New USB device found, idVendor=1b1c, idProduct=0a0b
[86447.968813] usb 4-2: New USB device strings: Mfr=2, Product=3, SerialNumber=0
[86447.968816] usb 4-2: Product: Vengeance 2100 Headset Battery Charger
[86447.968819] usb 4-2: Manufacturer: Corsair
[86448.017897] input: Corsair Vengeance 2100 Headset Battery Charger as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.1/0003:1B1C:0A0B.001C/input/input44
[86448.072472] hid-generic 0003:1B1C:0A0B.001C: input,hiddev0,hidraw3: USB HID v1.11 Device [Corsair Vengeance 2100 Headset Battery Charger] on usb-0000:00:1d.2-2/input1
[86494.506778] usblp2: removed
[86494.507573] Did not find alt setting 1 for intf 0, config 1
[86494.510575] Did not find alt setting 1 for intf 0, config 1
[86494.530585] Did not find alt setting 1 for intf 0, config 1
[86494.667575] Did not find alt setting 1 for intf 0, config 1
[86494.670571] Did not find alt setting 1 for intf 0, config 1
[86494.673570] Did not find alt setting 1 for intf 0, config 1
[86679.785521] Did not find alt setting 1 for intf 0, config 1
[86679.788511] Did not find alt setting 1 for intf 0, config 1
[86705.184070] usb 4-2: USB disconnect, device number 22
[86748.533136] Did not find alt setting 1 for intf 0, config 1
[86748.536170] Did not find alt setting 1 for intf 0, config 1
[87140.643774] Did not find alt setting 1 for intf 0, config 1
[87140.646765] Did not find alt setting 1 for intf 0, config 1
[93549.931706] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[93550.275952] JFS: nTxBlock = 8192, nTxLock = 65536
[93550.706987] ntfs: driver 2.1.32 [Flags: R/O MODULE].
[93551.426223] QNX4 filesystem 0.2.3 registered.
[93551.816020] raid6: mmxx1    gen()  3854 MB/s
[93551.884009] raid6: mmxx2    gen()  4295 MB/s
[93551.952028] raid6: sse1x1   gen()  2601 MB/s
[93552.020014] raid6: sse1x2   gen()  3531 MB/s
[93552.088012] raid6: sse2x1   gen()  4741 MB/s
[93552.156007] raid6: sse2x1   xor()  5235 MB/s
[93552.224016] raid6: sse2x2   gen()  6243 MB/s
[93552.292009] raid6: sse2x2   xor()  6349 MB/s
[93552.292011] raid6: using algorithm sse2x2 gen() 6243 MB/s
[93552.292013] raid6: .... xor() 6349 MB/s, rmw enabled
[93552.292014] raid6: using ssse3x1 recovery algorithm
[93552.343739] xor: measuring software checksum speed
[93552.380007]    pIII_sse  : 11185.000 MB/sec
[93552.420006]    prefetch64-sse: 12697.000 MB/sec
[93552.420009] xor: using function: prefetch64-sse (12697.000 MB/sec)
[93552.747434] Btrfs loaded
[93553.998424] EXT4-fs (sda2): unable to read superblock
[93553.999784] EXT4-fs (sda2): unable to read superblock
[93554.014209] EXT4-fs (sda2): unable to read superblock
[93554.060644] FAT-fs (sda2): invalid media value (0x65)
[93554.060649] FAT-fs (sda2): Can't find a valid FAT filesystem
[93554.456880] XFS (sda2): Invalid superblock magic number
[93554.613807] FAT-fs (sda2): invalid media value (0x65)
[93554.613812] FAT-fs (sda2): Can't find a valid FAT filesystem
[93554.642241] MINIX-fs: unable to read superblock
[93554.819471] attempt to access beyond end of device
[93554.819475] sda2: rw=16, want=3, limit=2
[93554.819477] hfsplus: unable to find HFS+ superblock
[93554.881328] qnx4: no qnx4 filesystem (no root dir).
[93554.883283] ufs: You didn't specify the type of your ufs filesystem

               mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|nextstep-cd|openstep ...

               >>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufstype=old
[93554.896588] hfs: can't find a HFS filesystem on dev sda2
[93615.654601] audit: type=1400 audit(1453657810.944:20): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=30782 comm="apparmor_parser"
[93615.654934] audit: type=1400 audit(1453657810.944:21): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=30782 comm="apparmor_parser"
[93615.655226] audit: type=1400 audit(1453657810.944:22): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=30782 comm="apparmor_parser"
[93615.655507] audit: type=1400 audit(1453657810.944:23): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=30782 comm="apparmor_parser"
[93793.509604] EXT4-fs (sda2): unable to read superblock
[93793.510920] EXT4-fs (sda2): unable to read superblock
[93793.512235] EXT4-fs (sda2): unable to read superblock
[93793.539539] FAT-fs (sda2): invalid media value (0x65)
[93793.539544] FAT-fs (sda2): Can't find a valid FAT filesystem
[93793.544825] XFS (sda2): Invalid superblock magic number
[93793.548785] FAT-fs (sda2): invalid media value (0x65)
[93793.548789] FAT-fs (sda2): Can't find a valid FAT filesystem
[93793.552893] MINIX-fs: unable to read superblock
[93793.554098] attempt to access beyond end of device
[93793.554100] sda2: rw=16, want=3, limit=2
[93793.554102] hfsplus: unable to find HFS+ superblock
[93793.555530] qnx4: no qnx4 filesystem (no root dir).
[93793.557117] ufs: You didn't specify the type of your ufs filesystem

               mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|nextstep-cd|openstep ...

               >>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufstype=old
[93793.565120] hfs: can't find a HFS filesystem on dev sda2
[101231.636215] usb 2-2-port3: cannot reset (err = -71)
[101231.637222] usb 2-2-port3: cannot reset (err = -71)
[101231.638215] usb 2-2-port3: cannot reset (err = -71)
[101231.639215] usb 2-2-port3: cannot reset (err = -71)
[101231.640213] usb 2-2-port3: cannot reset (err = -71)
[101231.640215] usb 2-2-port3: Cannot enable. Maybe the USB cable is bad?
[101231.641216] usb 2-2-port3: cannot disable (err = -71)
[101231.642221] usb 2-2-port3: cannot reset (err = -71)
[101231.643214] usb 2-2-port3: cannot reset (err = -71)
[101231.644214] usb 2-2-port3: cannot reset (err = -71)
[101231.645212] usb 2-2-port3: cannot reset (err = -71)
[101231.646212] usb 2-2-port3: cannot reset (err = -71)
[101231.646214] usb 2-2-port3: Cannot enable. Maybe the USB cable is bad?
[101231.647220] usb 2-2-port3: cannot disable (err = -71)
[101231.648217] usb 2-2-port3: cannot reset (err = -71)
[101231.649214] usb 2-2-port3: cannot reset (err = -71)
[101231.650213] usb 2-2-port3: cannot reset (err = -71)
[101231.651223] usb 2-2-port3: cannot reset (err = -71)
[101231.652218] usb 2-2-port3: cannot reset (err = -71)
[101231.652220] usb 2-2-port3: Cannot enable. Maybe the USB cable is bad?
[101231.653215] usb 2-2-port3: cannot disable (err = -71)
[101231.654212] usb 2-2-port3: cannot reset (err = -71)
[101231.655213] usb 2-2-port3: cannot reset (err = -71)
[101231.656212] usb 2-2-port3: cannot reset (err = -71)
[101231.657217] usb 2-2-port3: cannot reset (err = -71)
[101231.658214] usb 2-2-port3: cannot reset (err = -71)
[101231.658215] usb 2-2-port3: Cannot enable. Maybe the USB cable is bad?
[101231.659215] usb 2-2-port3: cannot disable (err = -71)
[101231.660213] usb 2-2-port3: cannot disable (err = -71)
[101231.661217] hub 2-2:1.0: hub_port_status failed (err = -71)
[101231.700028] sd 11:0:0:0: [sdf] FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[101231.700033] sd 11:0:0:0: [sdf] CDB: Read(10) 28 00 3d c7 2d 67 00 00 f0 00
[101231.700036] blk_update_request: I/O error, dev sdf, sector 1036463463
[101231.740030] sd 11:0:0:0: [sdf] FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[101231.740036] sd 11:0:0:0: [sdf] CDB: Read(10) 28 00 3d c7 2e 57 00 00 10 00
[101231.740038] blk_update_request: I/O error, dev sdf, sector 1036463703
[101231.780031] sd 11:0:0:0: [sdf] FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[101231.780037] sd 11:0:0:0: [sdf] CDB: Read(10) 28 00 3d c7 2e 67 00 00 f0 00
[101231.780040] blk_update_request: I/O error, dev sdf, sector 1036463719
[101231.784046] usb usb2-port2: disabled by hub (EMI?), re-enabling...
[101231.784052] usb 2-2: USB disconnect, device number 10
[101231.784054] usb 2-2.1: USB disconnect, device number 11
[101231.816283] usb 2-2.2: USB disconnect, device number 12
[101231.820027] sd 11:0:0:0: [sdf] FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[101231.820031] sd 11:0:0:0: [sdf] CDB: Read(10) 28 00 3d c7 2f 57 00 00 10 00
[101231.820034] blk_update_request: I/O error, dev sdf, sector 1036463959
[101231.852558] usb 2-2.3: USB disconnect, device number 16
[101231.860017] sd 11:0:0:0: [sdf] FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[101231.860021] sd 11:0:0:0: [sdf] CDB: Read(10) 28 00 3d c7 2d 67 00 00 08 00
[101231.860024] blk_update_request: I/O error, dev sdf, sector 1036463463
[101231.860027] Buffer I/O error on dev sdf1, logical block 129557925, async page read
[101231.939392] usb 2-2.4: USB disconnect, device number 15
[101232.136172] Buffer I/O error on dev sdf1, logical block 129557925, async page read
[101232.136304] Buffer I/O error on dev sdf1, logical block 129557949, async page read
[101232.136342] Buffer I/O error on dev sdf1, logical block 129557917, async page read
[101232.196024] usb 2-2: new full-speed USB device number 17 using uhci_hcd
[101232.340221] usb 2-2: not running at top speed; connect to a high speed hub
[101232.356213] usb 2-2: New USB device found, idVendor=05e3, idProduct=0608
[101232.356215] usb 2-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[101232.356218] usb 2-2: Product: USB2.0 Hub
[101232.359257] hub 2-2:1.0: USB hub found
[101232.360207] hub 2-2:1.0: 4 ports detected
[101232.644018] usb 2-2.1: new low-speed USB device number 18 using uhci_hcd
[101232.815640] usb 2-2.1: New USB device found, idVendor=046d, idProduct=c219
[101232.815644] usb 2-2.1: New USB device strings: Mfr=3, Product=1, SerialNumber=0
[101232.815646] usb 2-2.1: Product: Logitech Cordless RumblePad 2
[101232.815648] usb 2-2.1: Manufacturer: Logitech
[101232.876318] input: Logitech Logitech Cordless RumblePad 2 as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.1/2-2.1:1.0/0003:046D:C219.001D/input/input45
[101232.932172] logitech 0003:046D:C219.001D: input,hidraw3: USB HID v1.10 Gamepad [Logitech Logitech Cordless RumblePad 2] on usb-0000:00:1d.0-2.1/input0
[101232.932178] hid_logitech: Force feedback for Logitech force feedback devices by Johann Deneux <johann.deneux@it.uu.se>
[101233.004022] usb 2-2.2: new full-speed USB device number 19 using uhci_hcd
[101233.337198] usb 2-2.2: New USB device found, idVendor=18ec, idProduct=3399
[101233.337202] usb 2-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[101233.337204] usb 2-2.2: Product: USB2.0 PC CAMERA
[101233.337205] usb 2-2.2: Manufacturer: ARKMICRO
[101233.339253] uvcvideo: Found UVC 1.00 device USB2.0 PC CAMERA (18ec:3399)
[101233.349195] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[101233.350318] input: USB2.0 PC CAMERA as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.2/2-2.2:1.0/input/input46
[101233.359193] usb 2-2.2: 3:1: cannot get freq at ep 0x82
[101233.388193] usb 2-2.2: Warning! Unlikely big volume range (=11903), cval->res is probably wrong.
[101233.388197] usb 2-2.2: [2] FU [Mic Capture Volume] ch = 2, val = 384/12287/1
[101233.464018] usb 2-2.3: new full-speed USB device number 20 using uhci_hcd
[101233.569193] usb 2-2.3: not running at top speed; connect to a high speed hub
[101233.593194] usb 2-2.3: New USB device found, idVendor=152d, idProduct=2329
[101233.593197] usb 2-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[101233.593199] usb 2-2.3: Product: USB to ATA/ATAPI bridge
[101233.593201] usb 2-2.3: Manufacturer: JMicron
[101233.593202] usb 2-2.3: SerialNumber: 29210AFFFFFF
[101233.600228] usb-storage 2-2.3:1.0: USB Mass Storage device detected
[101233.600335] usb-storage 2-2.3:1.0: Quirks match for vid 152d pid 2329: 8020
[101233.600356] scsi host12: usb-storage 2-2.3:1.0
[101233.672019] usb 2-2.4: new full-speed USB device number 21 using uhci_hcd
[101233.776195] usb 2-2.4: not running at top speed; connect to a high speed hub
[101233.796196] usb 2-2.4: New USB device found, idVendor=0930, idProduct=6545
[101233.796198] usb 2-2.4: New USB device strings: Mfr=0, Product=2, SerialNumber=3
[101233.796201] usb 2-2.4: Product: USB Flash Memory
[101233.796202] usb 2-2.4: SerialNumber: 0B3043700071699D
[101233.799235] usb-storage 2-2.4:1.0: USB Mass Storage device detected
[101233.799402] scsi host13: usb-storage 2-2.4:1.0
[101234.645203] scsi 12:0:0:0: Direct-Access     Hitachi  HDS721010CLA332       PQ: 0 ANSI: 2 CCS
[101234.645483] sd 12:0:0:0: Attached scsi generic sg6 type 0
[101234.650199] sd 12:0:0:0: [sdg] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[101234.655191] sd 12:0:0:0: [sdg] Write Protect is off
[101234.655194] sd 12:0:0:0: [sdg] Mode Sense: 28 00 00 00
[101234.660223] sd 12:0:0:0: [sdg] No Caching mode page found
[101234.660226] sd 12:0:0:0: [sdg] Assuming drive cache: write through
[101234.698194]  sdg: sdg1
[101234.715190] sd 12:0:0:0: [sdg] Attached SCSI disk
[101234.800199] scsi 13:0:0:0: Direct-Access              USB Flash Memory 5.00 PQ: 0 ANSI: 0 CCS
[101234.800458] sd 13:0:0:0: Attached scsi generic sg7 type 0
[101234.805189] sd 13:0:0:0: [sdh] 2013184 512-byte logical blocks: (1.03 GB/983 MiB)
[101234.808220] sd 13:0:0:0: [sdh] Write Protect is off
[101234.808223] sd 13:0:0:0: [sdh] Mode Sense: 23 00 00 00
[101234.811184] sd 13:0:0:0: [sdh] No Caching mode page found
[101234.811187] sd 13:0:0:0: [sdh] Assuming drive cache: write through
[101234.836192]  sdh: sdh1
[101234.849530] sd 13:0:0:0: [sdh] Attached SCSI removable disk
[101245.551056] usb 2-2.2: 3:1: cannot get freq at ep 0x82
[101245.553053] usb 2-2.2: 3:1: cannot get freq at ep 0x82
[101246.778040] usb 2-2.2: 3:1: cannot get freq at ep 0x82
[101246.780079] usb 2-2.2: 3:1: cannot get freq at ep 0x82
[101277.507671] usb 2-2.3: USB disconnect, device number 20
[101277.512032] sd 12:0:0:0: [sdg] FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[101277.512037] sd 12:0:0:0: [sdg] CDB: Read(10) 28 00 00 5f ad c7 00 00 f0 00
[101277.512040] blk_update_request: I/O error, dev sdg, sector 6270407
[101277.512064] sd 12:0:0:0: [sdg] FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[101277.512066] sd 12:0:0:0: [sdg] CDB: Read(10) 28 00 00 5f ae b7 00 00 10 00
[101277.512068] blk_update_request: I/O error, dev sdg, sector 6270647
[101277.625685] hub 2-2:1.0: hub_port_status failed (err = -71)
[101277.625691] usb 2-2-port3: connect-debounce failed
[101277.664089] usb 2-2: USB disconnect, device number 17
[101277.664093] usb 2-2.1: USB disconnect, device number 18
[101277.696283] usb 2-2.2: USB disconnect, device number 19
[101277.720710] usb 2-2.4: USB disconnect, device number 21
[101277.984024] usb 2-2: new full-speed USB device number 22 using uhci_hcd
[101278.128662] usb 2-2: not running at top speed; connect to a high speed hub
[101278.144666] usb 2-2: New USB device found, idVendor=05e3, idProduct=0608
[101278.144670] usb 2-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[101278.144672] usb 2-2: Product: USB2.0 Hub
[101278.147714] hub 2-2:1.0: USB hub found
[101278.148661] hub 2-2:1.0: 4 ports detected
[101278.428025] usb 2-2.1: new low-speed USB device number 23 using uhci_hcd
[101278.596660] usb 2-2.1: New USB device found, idVendor=046d, idProduct=c219
[101278.596664] usb 2-2.1: New USB device strings: Mfr=3, Product=1, SerialNumber=0
[101278.596666] usb 2-2.1: Product: Logitech Cordless RumblePad 2
[101278.596668] usb 2-2.1: Manufacturer: Logitech
[101278.656106] input: Logitech Logitech Cordless RumblePad 2 as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.1/2-2.1:1.0/0003:046D:C219.001E/input/input47
[101278.712267] logitech 0003:046D:C219.001E: input,hidraw3: USB HID v1.10 Gamepad [Logitech Logitech Cordless RumblePad 2] on usb-0000:00:1d.0-2.1/input0
[101278.712273] hid_logitech: Force feedback for Logitech force feedback devices by Johann Deneux <johann.deneux@it.uu.se>
[101278.784023] usb 2-2.2: new full-speed USB device number 24 using uhci_hcd
[101279.117652] usb 2-2.2: New USB device found, idVendor=18ec, idProduct=3399
[101279.117656] usb 2-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[101279.117659] usb 2-2.2: Product: USB2.0 PC CAMERA
[101279.117660] usb 2-2.2: Manufacturer: ARKMICRO
[101279.119717] uvcvideo: Found UVC 1.00 device USB2.0 PC CAMERA (18ec:3399)
[101279.129656] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[101279.130787] input: USB2.0 PC CAMERA as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.2/2-2.2:1.0/input/input48
[101279.139723] usb 2-2.2: 3:1: cannot get freq at ep 0x82
[101279.167652] usb 2-2.2: Warning! Unlikely big volume range (=11903), cval->res is probably wrong.
[101279.167657] usb 2-2.2: [2] FU [Mic Capture Volume] ch = 2, val = 384/12287/1
[101279.212651] usb 2-2.2: 3:1: cannot get freq at ep 0x82
[101279.214822] usb 2-2.2: 3:1: cannot get freq at ep 0x82
[101279.231649] usb 2-2.2: 3:1: cannot get freq at ep 0x82
[101279.233646] usb 2-2.2: 3:1: cannot get freq at ep 0x82
[101279.244035] usb 2-2.4: new full-speed USB device number 25 using uhci_hcd
[101279.348652] usb 2-2.4: not running at top speed; connect to a high speed hub
[101279.368655] usb 2-2.4: New USB device found, idVendor=0930, idProduct=6545
[101279.368659] usb 2-2.4: New USB device strings: Mfr=0, Product=2, SerialNumber=3
[101279.368661] usb 2-2.4: Product: USB Flash Memory
[101279.368662] usb 2-2.4: SerialNumber: 0B3043700071699D
[101279.371712] usb-storage 2-2.4:1.0: USB Mass Storage device detected
[101279.378301] scsi host14: usb-storage 2-2.4:1.0
[101280.380662] scsi 14:0:0:0: Direct-Access              USB Flash Memory 5.00 PQ: 0 ANSI: 0 CCS
[101280.381000] sd 14:0:0:0: Attached scsi generic sg6 type 0
[101280.386653] sd 14:0:0:0: [sdf] 2013184 512-byte logical blocks: (1.03 GB/983 MiB)
[101280.391654] sd 14:0:0:0: [sdf] Write Protect is off
[101280.391658] sd 14:0:0:0: [sdf] Mode Sense: 23 00 00 00
[101280.393657] sd 14:0:0:0: [sdf] No Caching mode page found
[101280.393661] sd 14:0:0:0: [sdf] Assuming drive cache: write through
[101280.419671]  sdf: sdf1
[101280.430666] sd 14:0:0:0: [sdf] Attached SCSI removable disk
[101283.974593] usb 2-2-port4: cannot reset (err = -71)
[101283.975589] usb 2-2-port4: cannot reset (err = -71)
[101283.976590] usb 2-2-port4: cannot reset (err = -71)
[101283.977601] usb 2-2-port4: cannot reset (err = -71)
[101283.978590] usb 2-2-port4: cannot reset (err = -71)
[101283.978592] usb 2-2-port4: Cannot enable. Maybe the USB cable is bad?
[101283.979589] usb 2-2-port4: cannot disable (err = -71)
[101283.980589] usb 2-2-port4: cannot reset (err = -71)
[101283.981590] usb 2-2-port4: cannot reset (err = -71)
[101283.982593] usb 2-2-port4: cannot reset (err = -71)
[101283.983590] usb 2-2-port4: cannot reset (err = -71)
[101283.984588] usb 2-2-port4: cannot reset (err = -71)
[101283.984590] usb 2-2-port4: Cannot enable. Maybe the USB cable is bad?
[101283.985589] usb 2-2-port4: cannot disable (err = -71)
[101283.986588] usb 2-2-port4: cannot reset (err = -71)
[101283.987600] usb 2-2-port4: cannot reset (err = -71)
[101283.988591] usb 2-2-port4: cannot reset (err = -71)
[101283.989590] usb 2-2-port4: cannot reset (err = -71)
[101283.990588] usb 2-2-port4: cannot reset (err = -71)
[101283.990590] usb 2-2-port4: Cannot enable. Maybe the USB cable is bad?
[101283.991590] usb 2-2-port4: cannot disable (err = -71)
[101283.992594] usb 2-2-port4: cannot reset (err = -71)
[101283.993589] usb 2-2-port4: cannot reset (err = -71)
[101283.994590] usb 2-2-port4: cannot reset (err = -71)
[101283.995590] usb 2-2-port4: cannot reset (err = -71)
[101283.996590] usb 2-2-port4: cannot reset (err = -71)
[101283.996592] usb 2-2-port4: Cannot enable. Maybe the USB cable is bad?
[101283.998591] usb 2-2-port4: cannot disable (err = -71)
[101283.999589] usb 2-2-port4: cannot disable (err = -71)
[101284.000610] hub 2-2:1.0: hub_port_status failed (err = -71)
[101284.608060] usb 2-2: USB disconnect, device number 22
[101284.608064] usb 2-2.1: USB disconnect, device number 23
[101284.644270] usb 2-2.2: USB disconnect, device number 24
[101284.669030] usb 2-2.4: USB disconnect, device number 25
[101288.720017] usb 1-2: new high-speed USB device number 17 using ehci-pci
[101288.853271] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608
[101288.853275] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[101288.853277] usb 1-2: Product: USB2.0 Hub
[101288.853686] hub 1-2:1.0: USB hub found
[101288.854177] hub 1-2:1.0: 4 ports detected
[101289.124017] usb 1-2.1: new low-speed USB device number 18 using ehci-pci
[101289.278018] usb 1-2.1: New USB device found, idVendor=046d, idProduct=c219
[101289.278022] usb 1-2.1: New USB device strings: Mfr=3, Product=1, SerialNumber=0
[101289.278024] usb 1-2.1: Product: Logitech Cordless RumblePad 2
[101289.278026] usb 1-2.1: Manufacturer: Logitech
[101289.330220] input: Logitech Logitech Cordless RumblePad 2 as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2.1/1-2.1:1.0/0003:046D:C219.001F/input/input49
[101289.384276] logitech 0003:046D:C219.001F: input,hidraw3: USB HID v1.10 Gamepad [Logitech Logitech Cordless RumblePad 2] on usb-0000:00:1d.7-2.1/input0
[101289.384282] hid_logitech: Force feedback for Logitech force feedback devices by Johann Deneux <johann.deneux@it.uu.se>
[101289.456025] usb 1-2.3: new high-speed USB device number 19 using ehci-pci
[101289.548887] usb 1-2.3: New USB device found, idVendor=152d, idProduct=2329
[101289.548891] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[101289.548893] usb 1-2.3: Product: USB to ATA/ATAPI bridge
[101289.548895] usb 1-2.3: Manufacturer: JMicron
[101289.548897] usb 1-2.3: SerialNumber: 29210AFFFFFF
[101289.550168] usb-storage 1-2.3:1.0: USB Mass Storage device detected
[101289.552899] usb-storage 1-2.3:1.0: Quirks match for vid 152d pid 2329: 8020
[101289.552916] scsi host15: usb-storage 1-2.3:1.0
[101289.624029] usb 1-2.4: new high-speed USB device number 20 using ehci-pci
[101289.719765] usb 1-2.4: New USB device found, idVendor=0930, idProduct=6545
[101289.719769] usb 1-2.4: New USB device strings: Mfr=0, Product=2, SerialNumber=3
[101289.719771] usb 1-2.4: Product: USB Flash Memory
[101289.719773] usb 1-2.4: SerialNumber: 0B3043700071699D
[101289.720836] usb-storage 1-2.4:1.0: USB Mass Storage device detected
[101289.720951] scsi host16: usb-storage 1-2.4:1.0
[101290.700022] usb 1-2.2: new high-speed USB device number 21 using ehci-pci
[101290.720520] scsi 16:0:0:0: Direct-Access              USB Flash Memory 5.00 PQ: 0 ANSI: 0 CCS
[101291.009996] usb 1-2.2: New USB device found, idVendor=18ec, idProduct=3399
[101291.010000] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[101291.010002] usb 1-2.2: Product: USB2.0 PC CAMERA
[101291.010004] usb 1-2.2: Manufacturer: ARKMICRO
[101291.010610] uvcvideo: Found UVC 1.00 device USB2.0 PC CAMERA (18ec:3399)
[101291.018991] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[101291.019631] input: USB2.0 PC CAMERA as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2.2/1-2.2:1.0/input/input50
[101291.021367] usb 1-2.2: 3:1: cannot get freq at ep 0x82
[101291.026740] usb 1-2.2: Warning! Unlikely big volume range (=11903), cval->res is probably wrong.
[101291.026743] usb 1-2.2: [2] FU [Mic Capture Volume] ch = 2, val = 384/12287/1
[101291.091250] usb 1-2.2: 3:1: cannot get freq at ep 0x82
[101291.091745] usb 1-2.2: 3:1: cannot get freq at ep 0x82
[101291.110063] usb 1-2.2: 3:1: cannot get freq at ep 0x82
[101291.110369] usb 1-2.2: 3:1: cannot get freq at ep 0x82
[101292.590885] scsi 15:0:0:0: Direct-Access     Hitachi  HDS721010CLA332       PQ: 0 ANSI: 2 CCS
[101292.591378] sd 15:0:0:0: Attached scsi generic sg6 type 0
[101292.591701] sd 16:0:0:0: Attached scsi generic sg7 type 0
[101293.171984] sd 16:0:0:0: [sdg] 2013184 512-byte logical blocks: (1.03 GB/983 MiB)
[101293.172723] sd 16:0:0:0: [sdg] Write Protect is off
[101293.172726] sd 16:0:0:0: [sdg] Mode Sense: 23 00 00 00
[101293.173346] sd 16:0:0:0: [sdg] No Caching mode page found
[101293.173349] sd 16:0:0:0: [sdg] Assuming drive cache: write through
[101293.177856]  sdg: sdg1
[101293.180598] sd 16:0:0:0: [sdg] Attached SCSI removable disk
[101297.957456] sd 15:0:0:0: [sdf] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[101297.958421] sd 15:0:0:0: [sdf] Write Protect is off
[101297.958424] sd 15:0:0:0: [sdf] Mode Sense: 28 00 00 00
[101297.959423] sd 15:0:0:0: [sdf] No Caching mode page found
[101297.959426] sd 15:0:0:0: [sdf] Assuming drive cache: write through
[101297.977186]  sdf: sdf1
[101298.003918] sd 15:0:0:0: [sdf] Attached SCSI disk
[101299.016415] FAT-fs (sdg1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
========================================================CPUINFO=================================================================
processor	: 0
vendor_id	: GenuineIntel
cpu family	: 6
model		: 23
model name	: Intel(R) Core(TM)2 Duo CPU     E8400  @ 3.00GHz
stepping	: 10
microcode	: 0xa0b
cpu MHz		: 2997.000
cache size	: 6144 KB
physical id	: 0
siblings	: 2
core id		: 0
cpu cores	: 2
apicid		: 0
initial apicid	: 0
fdiv_bug	: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 13
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm dtherm tpr_shadow vnmi flexpriority
bugs		:
bogomips	: 5994.08
clflush size	: 64
cache_alignment	: 64
address sizes	: 36 bits physical, 48 bits virtual
power management:

processor	: 1
vendor_id	: GenuineIntel
cpu family	: 6
model		: 23
model name	: Intel(R) Core(TM)2 Duo CPU     E8400  @ 3.00GHz
stepping	: 10
microcode	: 0xa0b
cpu MHz		: 2997.000
cache size	: 6144 KB
physical id	: 0
siblings	: 2
core id		: 1
cpu cores	: 2
apicid		: 1
initial apicid	: 1
fdiv_bug	: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 13
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm dtherm tpr_shadow vnmi flexpriority
bugs		:
bogomips	: 5994.08
clflush size	: 64
cache_alignment	: 64
address sizes	: 36 bits physical, 48 bits virtual
power management: