U-Boot SPL 2015.10-rc3-00001-gfb375b5 (Sep 10 2015 - 10:07:48)
bad magic


U-Boot 2015.10-rc3-00001-gfb375b5 (Sep 10 2015 - 10:07:48 -0500), Build: jenkins-github_Bootloader-Builder-222

       Watchdog enabled
I2C:   ready
DRAM:  512 MiB
Reset Source: Power-on reset has occurred.
MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1
Using default environment

Net:   <ethaddr> not set. Validating first E-fuse MAC
cpsw
Hit any key to stop autoboot:  0
gpio: pin 53 (gpio 53) value is 1
Card did not respond to voltage select!
Card did not respond to voltage select!
gpio: pin 56 (gpio 56) value is 0
gpio: pin 55 (gpio 55) value is 0
gpio: pin 54 (gpio 54) value is 0
switch to partitions #0, OK
mmc1(part 0) is current device
gpio: pin 54 (gpio 54) value is 1
Checking for: /uEnv.txt ...
Checking for: /boot.scr ...
Checking for: /boot/boot.scr ...
Checking for: /boot/uEnv.txt ...
gpio: pin 55 (gpio 55) value is 1
985 bytes read in 15 ms (63.5 KiB/s)
Loaded environment from /boot/uEnv.txt
Checking if uname_r is set in /boot/uEnv.txt...
gpio: pin 56 (gpio 56) value is 1
Running uname_boot ...
loading /boot/vmlinuz-3.8.13-bone77 ...
5584112 bytes read in 335 ms (15.9 MiB/s)
loading /boot/dtbs/3.8.13-bone77/am335x-boneblack.dtb ...
26118 bytes read in 33 ms (772.5 KiB/s)
loading /boot/initrd.img-3.8.13-bone77 ...
3327906 bytes read in 214 ms (14.8 MiB/s)
debug: [console=ttyO0,115200n8 dyndbg=file drivers/of/base.c +pflm; file sound* +pflm; file pinctrl/* +pflm; file drivers/gpio/* +pflm; file drivers/regulator* +pflm; file *cape* +pflm capemgr.disable_partno=BB-BONELT-HDMI,BB-BONELT-HDMIN capemgr.enable_partno=BB-BONE-AUDI-02 root=UUID=69f859b1-c308-41c9-8ca7-a3d0042031e8 ro rootfstype=ext4 rootwait fixrtc coherent_pool=1M quiet] ...
debug: [bootz 0x82000000 0x88080000:32c7a2 0x88000000] ...
Kernel image @ 0x82000000 [ 0x000000 - 0x5534f0 ]
## Flattened Device Tree blob at 88000000
   Booting using the fdt blob at 0x88000000
   Loading Ramdisk to 8fcd3000, end 8ffff7a2 ... OK
   Loading Device Tree to 8fcc9000, end 8fcd2605 ... OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
[    0.396128] omap2_mbox_probe: platform not supported
[    0.554852] tps65217-bl tps65217-bl: no platform data provided
[    0.617889] bone-capemgr bone_capemgr.9: slot #0: No cape found
[    0.654996] bone-capemgr bone_capemgr.9: slot #1: No cape found
[    0.692104] bone-capemgr bone_capemgr.9: slot #2: No cape found
[    0.722273] bone-capemgr bone_capemgr.9: bone: Invalid signature 'ffffffff' at slot 3
[    0.730466] bone-capemgr bone_capemgr.9: slot #3: No cape found
[    0.753099] omap_hsmmc mmc.5: of_parse_phandle_with_args of 'reset' failed
[    0.815395] pinctrl-single 44e10800.pinmux: pin 44e10854 already requested by 44e10800.pinmux; cannot claim for gpio-leds.8
[    0.827107] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.8) status -22
[    0.834392] pinctrl-single 44e10800.pinmux: could not request pin 21 on device pinctrl-single
Loading, please wait...
fsck from util-linux 2.25.2
BEAGLEBONE: recovering journal
BEAGLEBONE: clean, 47451/236176 files, 302882/943872 blocks
[    5.396866] libphy: PHY 4a101000.mdio:01 not found
[    5.401974] net eth0: phy 4a101000.mdio:01 not found on slave 1
[  OK  ] Started LSB: Raise network interfaces..
[  OK  ] Reached target Network.
[  OK  ] Reached target Network is Online.
[  OK  ] Reached target System Initialization.
[  OK  ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[  OK  ] Listening on D-Bus System Message Bus Socket.
[  OK  ] Reached target Sockets.
[  OK  ] Reached target Timers.
         Starting Restore Sound Card State...
[  OK  ] Reached target Basic System.
         Starting OpenBSD Secure Shell server...
[  OK  ] Started OpenBSD Secure Shell server.
         Starting Regular background program processing daemon...
[  OK  ] Started Regular background program processing daemon.
         Starting Cape Manager Service...
         Starting Generic Board Startup...
         Starting /etc/rc.local Compatibility...
         Starting Login Service...
         Starting LSB: Start busybox udhcpd at boot time...
         Starting LSB: Start NTP daemon...
         Starting Avahi mDNS/DNS-SD Stack...
         Starting D-Bus System Message Bus...
[  OK  ] Started D-Bus System Message Bus.
[  OK  ] Started Avahi mDNS/DNS-SD Stack.
         Starting System Logging Service...
         Starting Permit User Sessions...
[  OK  ] Started Restore Sound Card State.
[  OK  ] Started Cape Manager Service.
[  OK  ] Started /etc/rc.local Compatibility.
[  OK  ] Started LSB: Start busybox udhcpd at boot time.
[  OK  ] Started LSB: Start NTP daemon.
[  OK  ] Started Permit User Sessions.
[  OK  ] Started System Logging Service.
[  OK  ] Started Login Service.
         Starting Getty on tty1...
[  OK  ] Started Getty on tty1.
         Starting Serial Getty on ttyO0...
[  OK  ] Started Serial Getty on ttyO0.
         Stopping LSB: Start busybox udhcpd at boot time...
[  OK  ] Stopped LSB: Start busybox udhcpd at boot time.
         Starting LSB: Start busybox udhcpd at boot time...
[  OK  ] Started LSB: Start busybox udhcpd at boot time.
[  OK  ] Started Generic Board Startup.

Debian GNU/Linux 8 beaglebone ttyO0

BeagleBoard.org Debian Image 2015-09-13

Support/FAQ: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian

default username:password is [debian:temppwd]