[code]eth0      no wireless extensions.

lo        no wireless extensions.

wlan0     IEEE 802.11bgn  ESSID:"Forthnet-8C1EC"
          Mode:Managed  Frequency:2.462 GHz  Access Point: 14:60:80:98:C1:EC
          Bit Rate=57.8 Mb/s   Tx-Power=16 dBm
          Retry  long limit:7   RTS thr:off   Fragment thr:off
          Power Management:off
          Link Quality=67/70  Signal level=-43 dBm
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:189  Invalid misc:582   Missed beacon:0
[/code]

[code][    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.11.0-12-generic (buildd@allspice) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu7) ) #19-Ubuntu SMP Wed Oct 9 16:20:46 UTC 2013 (Ubuntu 3.11.0-12.19-generic 3.11.3)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=fe02afb3-acc3-459a-acfe-b4f1da001454 ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000b9bb7fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b9bb8000-0x00000000ba047fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ba048000-0x00000000ba05bfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000ba05c000-0x00000000ba192fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000ba193000-0x00000000ba8abfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ba8ac000-0x00000000ba8acfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ba8ad000-0x00000000ba8effff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000ba8f0000-0x00000000bacfafff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bacfb000-0x00000000baff3fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000baff4000-0x00000000baffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bb800000-0x00000000bf9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013f5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. 350V5C/350V5X/350V4C/350V4X/351V5C/351V5X/351V4C/351V4X/3540VC/3540VX/3440VC/3440VX/NP350E5C-S03G
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x13f600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F00000000 write-back
[    0.000000]   1 base 100000000 mask FC0000000 write-back
[    0.000000]   2 base 0C0000000 mask FC0000000 uncachable
[    0.000000]   3 base 0BC000000 mask FFC000000 uncachable
[    0.000000]   4 base 0BB800000 mask FFF800000 uncachable
[    0.000000]   5 base 13F800000 mask FFF800000 uncachable
[    0.000000]   6 base 13F600000 mask FFFE00000 uncachable
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 4GB, type WB
[    0.000000] reg 1, base: 4GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3GB, range: 1GB, type UC
[    0.000000] reg 3, base: 3008MB, range: 64MB, type UC
[    0.000000] reg 4, base: 3000MB, range: 8MB, type UC
[    0.000000] reg 5, base: 5112MB, range: 8MB, type UC
[    0.000000] reg 6, base: 5110MB, range: 2MB, type UC
[    0.000000] total RAM covered: 4014M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 128M 	num_reg: 7  	lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3000MB, range: 8MB, type UC
[    0.000000] reg 3, base: 3008MB, range: 64MB, type UC
[    0.000000] reg 4, base: 4GB, range: 1GB, type WB
[    0.000000] reg 5, base: 5110MB, range: 2MB, type UC
[    0.000000] reg 6, base: 5112MB, range: 8MB, type UC
[    0.000000] e820: update [mem 0xbb800000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xbb000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fd780-0x000fd78f] mapped at [ffff8800000fd780]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01fd1000, 0x01fd1fff] PGTABLE
[    0.000000] BRK [0x01fd2000, 0x01fd2fff] PGTABLE
[    0.000000] BRK [0x01fd3000, 0x01fd3fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x13f400000-0x13f5fffff]
[    0.000000]  [mem 0x13f400000-0x13f5fffff] page 2M
[    0.000000] BRK [0x01fd4000, 0x01fd4fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x13c000000-0x13f3fffff]
[    0.000000]  [mem 0x13c000000-0x13f3fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff]
[    0.000000]  [mem 0x100000000-0x13bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
[    0.000000]  [mem 0x20200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0x40003fff] page 4k
[    0.000000] BRK [0x01fd5000, 0x01fd5fff] PGTABLE
[    0.000000] BRK [0x01fd6000, 0x01fd6fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x40005000-0xb9bb7fff]
[    0.000000]  [mem 0x40005000-0x401fffff] page 4k
[    0.000000]  [mem 0x40200000-0xb99fffff] page 2M
[    0.000000]  [mem 0xb9a00000-0xb9bb7fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xba8ac000-0xba8acfff]
[    0.000000]  [mem 0xba8ac000-0xba8acfff] page 4k
[    0.000000] init_memory_mapping: [mem 0xba8f0000-0xbacfafff]
[    0.000000]  [mem 0xba8f0000-0xba9fffff] page 4k
[    0.000000]  [mem 0xbaa00000-0xbabfffff] page 2M
[    0.000000]  [mem 0xbac00000-0xbacfafff] page 4k
[    0.000000] init_memory_mapping: [mem 0xbaff4000-0xbaffffff]
[    0.000000]  [mem 0xbaff4000-0xbaffffff] page 4k
[    0.000000] RAMDISK: [mem 0x34fba000-0x367d4fff]
[    0.000000] ACPI: RSDP 00000000000f0490 00024 (v02 SECCSD)
[    0.000000] ACPI: XSDT 00000000ba04c088 0008C (v01 SECCSD LH43STAR 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 00000000ba057b18 0010C (v05 SECCSD LH43STAR 01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 00000000ba04c1a0 0B976 (v02 SECCSD LH43STAR 00000022 INTL 20051117)
[    0.000000] ACPI: FACS 00000000ba190080 00040
[    0.000000] ACPI: APIC 00000000ba057c28 00072 (v03 SECCSD LH43STAR 01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 00000000ba057ca0 00044 (v01 SECCSD LH43STAR 01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 00000000ba057ce8 0003C (v01 SECCSD LH43STAR 01072009 MSFT 00000097)
[    0.000000] ACPI: MSDM 00000000ba057d28 00055 (v03 SECCSD LH43STAR 01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 00000000ba057d80 006E9 (v01 TrmRef PtidDevc 00001000 INTL 20091112)
[    0.000000] ACPI: HPET 00000000ba058470 00038 (v01 SECCSD LH43STAR 01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 00000000ba0584a8 002BD (v01 SataRe SataTabl 00001000 INTL 20091112)
[    0.000000] ACPI: SSDT 00000000ba058768 00968 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 00000000ba0590d0 00A92 (v01  PmRef    CpuPm 00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 00000000ba059b68 00793 (v01  SgRef   SgTabl 00001000 INTL 20051117)
[    0.000000] ACPI: SSDT 00000000ba05a300 00E5A (v01 AmdRef  AmdTabl 00001000 INTL 20051117)
[    0.000000] ACPI: SLIC 00000000ba05b160 00176 (v01 SECCSD LH43STAR 01072009 AMI  00010013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000013f5fffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x13f5fffff]
[    0.000000]   NODE_DATA [mem 0x13f5f6000-0x13f5fafff]
[    0.000000]  [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013ac00000-ffff88013ebfffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x13f5fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009cfff]
[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
[    0.000000]   node   0: [mem 0x20200000-0x40003fff]
[    0.000000]   node   0: [mem 0x40005000-0xb9bb7fff]
[    0.000000]   node   0: [mem 0xba8ac000-0xba8acfff]
[    0.000000]   node   0: [mem 0xba8f0000-0xbacfafff]
[    0.000000]   node   0: [mem 0xbaff4000-0xbaffffff]
[    0.000000]   node   0: [mem 0x100000000-0x13f5fffff]
[    0.000000] On node 0 totalpages: 1020779
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11832 pages used for memmap
[    0.000000]   DMA32 zone: 757199 pages, LIFO batch:31
[    0.000000]   Normal zone: 4056 pages used for memmap
[    0.000000]   Normal zone: 259584 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[    0.000000] PM: Registered nosave memory: [mem 0xb9bb8000-0xba047fff]
[    0.000000] PM: Registered nosave memory: [mem 0xba048000-0xba05bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xba05c000-0xba192fff]
[    0.000000] PM: Registered nosave memory: [mem 0xba193000-0xba8abfff]
[    0.000000] PM: Registered nosave memory: [mem 0xba8ad000-0xba8effff]
[    0.000000] PM: Registered nosave memory: [mem 0xbacfb000-0xbaff3fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb000000-0xbb7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb800000-0xbf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfa00000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xbfa00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff88013f200000 s86720 r8192 d23872 u524288
[    0.000000] pcpu-alloc: s86720 r8192 d23872 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1004806
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=fe02afb3-acc3-459a-acfe-b4f1da001454 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3909784K/4083116K available (7141K kernel code, 1082K rwdata, 3260K rodata, 1364K init, 1420K bss, 173332K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.000000] 	Offload RCU callbacks from all CPUs
[    0.000000] 	Offload RCU callbacks from CPUs: 0-255.
[    0.000000] NR_IRQS:16640 nr_irqs:712 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 16777216 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 2494.391 MHz processor
[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.78 BogoMIPS (lpj=9977564)
[    0.000005] pid_max: default: 32768 minimum: 301
[    0.000025] Security Framework initialized
[    0.000040] AppArmor: AppArmor initialized
[    0.000041] Yama: becoming mindful.
[    0.000283] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.001262] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.001694] Mount-cache hash table entries: 256
[    0.001850] Initializing cgroup subsys memory
[    0.001858] Initializing cgroup subsys devices
[    0.001860] Initializing cgroup subsys freezer
[    0.001861] Initializing cgroup subsys blkio
[    0.001862] Initializing cgroup subsys perf_event
[    0.001864] Initializing cgroup subsys hugetlb
[    0.001884] CPU: Physical Processor ID: 0
[    0.001884] CPU: Processor Core ID: 0
[    0.001889] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.001889] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.002247] mce: CPU supports 7 MCE banks
[    0.002257] CPU0: Thermal monitoring enabled (TM1)
[    0.002266] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[    0.002266] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[    0.002266] tlb_flushall_shift: 1
[    0.002385] Freeing SMP alternatives memory: 28K (ffffffff81e65000 - ffffffff81e6c000)
[    0.004401] ACPI: Core revision 20130517
[    0.011916] ACPI: All ACPI Tables successfully acquired
[    0.016433] ftrace: allocating 27796 entries in 109 pages
[    0.029551] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.069282] smpboot: CPU0: Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz (fam: 06, model: 3a, stepping: 09)
[    0.069289] TSC deadline timer enabled
[    0.069299] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[    0.069305] ... version:                3
[    0.069306] ... bit width:              48
[    0.069307] ... generic registers:      4
[    0.069308] ... value mask:             0000ffffffffffff
[    0.069309] ... max period:             0000ffffffffffff
[    0.069310] ... fixed-purpose events:   3
[    0.069310] ... event mask:             000000070000000f
[    0.084120] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.070622] smpboot: Booting Node   0, Processors  #1 #2 #3 OK
[    0.111298] Brought up 4 CPUs
[    0.111302] smpboot: Total of 4 processors activated (19955.12 BogoMIPS)
[    0.114442] devtmpfs: initialized
[    0.115181] EVM: security.selinux
[    0.115183] EVM: security.SMACK64
[    0.115183] EVM: security.capability
[    0.115226] PM: Registering ACPI NVS region [mem 0xba05c000-0xba192fff] (1273856 bytes)
[    0.115242] PM: Registering ACPI NVS region [mem 0xba8ad000-0xba8effff] (274432 bytes)
[    0.115931] regulator-dummy: no parameters
[    0.115961] RTC time: 11:56:23, date: 03/15/14
[    0.115989] NET: Registered protocol family 16
[    0.116102] ACPI: bus type PCI registered
[    0.116104] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.116145] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.116147] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.123053] PCI: Using configuration type 1 for base access
[    0.123761] bio: create slab <bio-0> at 0
[    0.123897] ACPI: Added _OSI(Module Device)
[    0.123899] ACPI: Added _OSI(Processor Device)
[    0.123900] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.123901] ACPI: Added _OSI(Processor Aggregator Device)
[    0.125484] ACPI: EC: Look up EC in DSDT
[    0.127076] ACPI: Executed 1 blocks of module-level executable AML code
[    0.131313] ACPI: SSDT 00000000b9ff5018 0083B (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.131714] ACPI: Dynamic OEM Table Load:
[    0.131716] ACPI: SSDT           (null) 0083B (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.135552] ACPI: SSDT 00000000b9ff6a98 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.135976] ACPI: Dynamic OEM Table Load:
[    0.135977] ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.142400] ACPI: SSDT 00000000b9ff7c18 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.142794] ACPI: Dynamic OEM Table Load:
[    0.142795] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    1.383991] ACPI: Interpreter enabled
[    1.383998] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
[    1.384003] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
[    1.384018] ACPI: (supports S0 S3 S4 S5)
[    1.384019] ACPI: Using IOAPIC for interrupt routing
[    1.384042] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.384173] ACPI: No dock devices found.
[    1.407673] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    1.407866] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
[    1.408045] acpi PNP0A08:00: ACPI _OSC control (0x18) granted
[    1.408519] PCI host bridge to bus 0000:00
[    1.408521] pci_bus 0000:00: root bus resource [bus 00-3e]
[    1.408523] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    1.408524] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    1.408526] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    1.408527] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[    1.408529] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    1.408530] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    1.408532] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[    1.408533] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[    1.408534] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[    1.408536] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff]
[    1.408544] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[    1.408626] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[    1.408656] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    1.408699] pci 0000:00:01.0: System wakeup disabled by ACPI
[    1.408729] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[    1.408739] pci 0000:00:02.0: reg 0x10: [mem 0xbfc00000-0xbfffffff 64bit]
[    1.408744] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    1.408749] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
[    1.408846] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    1.408868] pci 0000:00:14.0: reg 0x10: [mem 0xc0300000-0xc030ffff 64bit]
[    1.408939] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    1.408997] pci 0000:00:14.0: System wakeup disabled by ACPI
[    1.409029] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    1.409053] pci 0000:00:16.0: reg 0x10: [mem 0xc031a000-0xc031a00f 64bit]
[    1.409129] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    1.409213] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    1.409234] pci 0000:00:1a.0: reg 0x10: [mem 0xc0318000-0xc03183ff]
[    1.409324] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    1.409389] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    1.409421] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    1.409436] pci 0000:00:1b.0: reg 0x10: [mem 0xc0310000-0xc0313fff 64bit]
[    1.409504] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    1.409557] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    1.409585] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    1.409664] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    1.409715] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    1.409743] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[    1.409821] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    1.409871] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    1.409907] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    1.409930] pci 0000:00:1d.0: reg 0x10: [mem 0xc0317000-0xc03173ff]
[    1.410019] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    1.410085] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    1.410115] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
[    1.410287] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    1.410305] pci 0000:00:1f.2: reg 0x10: [io  0x40b0-0x40b7]
[    1.410314] pci 0000:00:1f.2: reg 0x14: [io  0x40a0-0x40a3]
[    1.410322] pci 0000:00:1f.2: reg 0x18: [io  0x4090-0x4097]
[    1.410330] pci 0000:00:1f.2: reg 0x1c: [io  0x4080-0x4083]
[    1.410338] pci 0000:00:1f.2: reg 0x20: [io  0x4060-0x407f]
[    1.410346] pci 0000:00:1f.2: reg 0x24: [mem 0xc0316000-0xc03167ff]
[    1.410392] pci 0000:00:1f.2: PME# supported from D3hot
[    1.410460] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    1.410476] pci 0000:00:1f.3: reg 0x10: [mem 0xc0315000-0xc03150ff 64bit]
[    1.410497] pci 0000:00:1f.3: reg 0x20: [io  0x4040-0x405f]
[    1.410614] pci 0000:01:00.0: [1002:6840] type 00 class 0x030000
[    1.410629] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[    1.410639] pci 0000:01:00.0: reg 0x18: [mem 0xc0220000-0xc023ffff 64bit]
[    1.410647] pci 0000:01:00.0: reg 0x20: [io  0x3000-0x30ff]
[    1.410660] pci 0000:01:00.0: reg 0x30: [mem 0xc0200000-0xc021ffff pref]
[    1.410693] pci 0000:01:00.0: supports D1 D2
[    1.410709] pci 0000:01:00.0: System wakeup disabled by ACPI
[    1.419928] pci 0000:00:01.0: PCI bridge to [bus 01]
[    1.419943] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    1.419946] pci 0000:00:01.0:   bridge window [mem 0xc0200000-0xc02fffff]
[    1.419949] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    1.420088] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    1.420157] pci 0000:02:00.0: reg 0x10: [io  0x2000-0x20ff]
[    1.420274] pci 0000:02:00.0: reg 0x18: [mem 0xc0104000-0xc0104fff 64bit pref]
[    1.420345] pci 0000:02:00.0: reg 0x20: [mem 0xc0100000-0xc0103fff 64bit pref]
[    1.420683] pci 0000:02:00.0: supports D1 D2
[    1.420684] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.420811] pci 0000:02:00.0: System wakeup disabled by ACPI
[    1.427993] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    1.427998] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    1.428002] pci 0000:00:1c.0:   bridge window [mem 0xc0100000-0xc01fffff]
[    1.428088] pci 0000:03:00.0: [168c:0032] type 00 class 0x028000
[    1.428116] pci 0000:03:00.0: reg 0x10: [mem 0xc0000000-0xc007ffff 64bit]
[    1.428180] pci 0000:03:00.0: reg 0x30: [mem 0xc0080000-0xc008ffff pref]
[    1.428247] pci 0000:03:00.0: supports D1 D2
[    1.428249] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.428280] pci 0000:03:00.0: System wakeup disabled by ACPI
[    1.435972] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    1.435978] pci 0000:00:1c.1:   bridge window [mem 0xc0000000-0xc00fffff]
[    1.440355] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    1.440403] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 10 11 12 14 15)
[    1.440449] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    1.440494] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    1.440538] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.440584] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.440628] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
[    1.440675] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 10 11 12 14 15)
[    1.440931] ACPI: Enabled 5 GPEs in block 00 to 3F
[    1.440937] ACPI: \_SB_.PCI0: notify handler is installed
[    1.440999] Found 1 acpi root devices
[    1.441024] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    1.441105] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    1.441110] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[    1.441111] vgaarb: loaded
[    1.441111] vgaarb: bridge control possible 0000:01:00.0
[    1.441112] vgaarb: no bridge control possible 0000:00:02.0
[    1.441241] SCSI subsystem initialized
[    1.441242] ACPI: bus type ATA registered
[    1.441289] libata version 3.00 loaded.
[    1.441314] ACPI: bus type USB registered
[    1.441329] usbcore: registered new interface driver usbfs
[    1.441336] usbcore: registered new interface driver hub
[    1.441360] usbcore: registered new device driver usb
[    1.441449] PCI: Using ACPI for IRQ routing
[    1.442998] PCI: pci_cache_line_size set to 64 bytes
[    1.443046] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    1.443047] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[    1.443048] e820: reserve RAM buffer [mem 0xb9bb8000-0xbbffffff]
[    1.443050] e820: reserve RAM buffer [mem 0xba8ad000-0xbbffffff]
[    1.443052] e820: reserve RAM buffer [mem 0xbacfb000-0xbbffffff]
[    1.443053] e820: reserve RAM buffer [mem 0xbb000000-0xbbffffff]
[    1.443054] e820: reserve RAM buffer [mem 0x13f600000-0x13fffffff]
[    1.443125] NetLabel: Initializing
[    1.443126] NetLabel:  domain hash size = 128
[    1.443127] NetLabel:  protocols = UNLABELED CIPSOv4
[    1.443135] NetLabel:  unlabeled traffic allowed by default
[    1.443189] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    1.443194] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    1.445220] Switched to clocksource hpet
[    1.449078] AppArmor: AppArmor Filesystem Enabled
[    1.449101] pnp: PnP ACPI init
[    1.449112] ACPI: bus type PNP registered
[    1.449193] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    1.449197] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    1.449208] pnp 00:01: [dma 4]
[    1.449252] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    1.449269] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    1.449353] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    1.449384] system 00:04: [io  0x0680-0x069f] has been reserved
[    1.449386] system 00:04: [io  0x1000-0x100f] has been reserved
[    1.449388] system 00:04: [io  0xffff] has been reserved
[    1.449390] system 00:04: [io  0xffff] has been reserved
[    1.449391] system 00:04: [io  0x0400-0x0453] could not be reserved
[    1.449393] system 00:04: [io  0x0458-0x047f] has been reserved
[    1.449395] system 00:04: [io  0x0500-0x057f] has been reserved
[    1.449396] system 00:04: [io  0x164e-0x164f] has been reserved
[    1.449398] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.449436] system 00:05: [io  0x0454-0x0457] has been reserved
[    1.449438] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    1.449475] system 00:06: [io  0x04d0-0x04d1] has been reserved
[    1.449476] system 00:06: [io  0xfd60-0xfd63] has been reserved
[    1.449478] system 00:06: [mem 0xff000000-0xff000fff] has been reserved
[    1.449480] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.449505] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[    1.449539] pnp 00:08: Plug and Play ACPI device, IDs SYN2601 PNP0f13 (active)
[    1.449563] pnp 00:09: Plug and Play ACPI device, IDs MSF0001 PNP030b (active)
[    1.453281] pnp 00:0a: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.453550] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    1.453552] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
[    1.453554] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
[    1.453556] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
[    1.453557] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
[    1.453559] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
[    1.453561] system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved
[    1.453562] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
[    1.453564] system 00:0b: [mem 0xff010000-0xffffffff] has been reserved
[    1.453566] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
[    1.453567] system 00:0b: [mem 0xbfa00000-0xbfa00fff] has been reserved
[    1.453569] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.453750] system 00:0c: [mem 0x20000000-0x201fffff] has been reserved
[    1.453752] system 00:0c: [mem 0x40004000-0x40004fff] has been reserved
[    1.453754] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[    1.453768] pnp: PnP ACPI: found 13 devices
[    1.453769] ACPI: bus type PNP unregistered
[    1.460064] pci 0000:00:01.0: PCI bridge to [bus 01]
[    1.460067] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    1.460070] pci 0000:00:01.0:   bridge window [mem 0xc0200000-0xc02fffff]
[    1.460073] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    1.460076] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    1.460079] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    1.460085] pci 0000:00:1c.0:   bridge window [mem 0xc0100000-0xc01fffff]
[    1.460093] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    1.460098] pci 0000:00:1c.1:   bridge window [mem 0xc0000000-0xc00fffff]
[    1.460297] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    1.460299] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    1.460301] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    1.460302] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[    1.460304] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[    1.460305] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[    1.460307] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[    1.460308] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[    1.460310] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[    1.460311] pci_bus 0000:00: resource 13 [mem 0xbfa00000-0xfeafffff]
[    1.460313] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    1.460314] pci_bus 0000:01: resource 1 [mem 0xc0200000-0xc02fffff]
[    1.460316] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[    1.460318] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    1.460319] pci_bus 0000:02: resource 1 [mem 0xc0100000-0xc01fffff]
[    1.460321] pci_bus 0000:03: resource 1 [mem 0xc0000000-0xc00fffff]
[    1.460345] NET: Registered protocol family 2
[    1.460477] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[    1.460587] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    1.460667] TCP: Hash tables configured (established 32768 bind 32768)
[    1.460681] TCP: reno registered
[    1.460688] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    1.460702] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    1.460750] NET: Registered protocol family 1
[    1.460760] pci 0000:00:02.0: Boot video device
[    1.501390] PCI: CLS 64 bytes, default 64
[    1.501428] Trying to unpack rootfs image as initramfs...
[    1.866576] Freeing initrd memory: 24684K (ffff880034fba000 - ffff8800367d5000)
[    1.866581] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.866583] software IO TLB [mem 0xb5bb8000-0xb9bb8000] (64MB) mapped at [ffff8800b5bb8000-ffff8800b9bb7fff]
[    1.866762] Scanning for low memory corruption every 60 seconds
[    1.866982] Initialise module verification
[    1.867014] audit: initializing netlink socket (disabled)
[    1.867024] type=2000 audit(1394884584.860:1): initialized
[    1.891529] bounce pool size: 64 pages
[    1.891536] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.892404] zbud: loaded
[    1.892516] VFS: Disk quotas dquot_6.5.2
[    1.892548] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.892905] fuse init (API version 7.22)
[    1.892964] msgmni has been set to 7684
[    1.893368] Key type asymmetric registered
[    1.893370] Asymmetric key parser 'x509' registered
[    1.893393] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.893426] io scheduler noop registered
[    1.893428] io scheduler deadline registered (default)
[    1.893446] io scheduler cfq registered
[    1.893510] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    1.893629] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.893641] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.893681] intel_idle: MWAIT substates: 0x21120
[    1.893682] intel_idle: v0.4 model 0x3A
[    1.893684] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.893788] ACPI: AC Adapter [ACAD] (on-line)
[    1.893881] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    1.893885] ACPI: Power Button [PWRB]
[    1.893910] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[    1.893932] ACPI: Lid Switch [LID0]
[    1.893956] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.893958] ACPI: Power Button [PWRF]
[    1.894018] ACPI: Requesting acpi_cpufreq
[    1.894475] thermal LNXTHERM:00: registered as thermal_zone0
[    1.894477] ACPI: Thermal Zone [TZ00] (29 C)
[    1.894499] GHES: HEST is not enabled!
[    1.894554] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.929793] [Firmware Bug]: battery: (dis)charge rate invalid.
[    1.929811] ACPI: Battery Slot [BAT1] (battery present)
[    1.929897] Linux agpgart interface v0.103
[    1.930923] brd: module loaded
[    1.931446] loop: module loaded
[    1.931684] libphy: Fixed MDIO Bus: probed
[    1.931742] tun: Universal TUN/TAP device driver, 1.6
[    1.931743] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[    1.931789] PPP generic driver version 2.4.2
[    1.931824] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.931825] ehci-pci: EHCI PCI platform driver
[    1.931919] ehci-pci 0000:00:1a.0: setting latency timer to 64
[    1.931926] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.931930] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.931943] ehci-pci 0000:00:1a.0: debug port 2
[    1.935844] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.935858] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc0318000
[    1.945804] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.945818] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.945820] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.945822] usb usb1: Product: EHCI Host Controller
[    1.945823] usb usb1: Manufacturer: Linux 3.11.0-12-generic ehci_hcd
[    1.945824] usb usb1: SerialNumber: 0000:00:1a.0
[    1.945918] hub 1-0:1.0: USB hub found
[    1.945922] hub 1-0:1.0: 2 ports detected
[    1.946077] ehci-pci 0000:00:1d.0: setting latency timer to 64
[    1.946083] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.946086] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.946098] ehci-pci 0000:00:1d.0: debug port 2
[    1.949988] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.950000] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc0317000
[    1.961822] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.961833] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.961834] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.961836] usb usb2: Product: EHCI Host Controller
[    1.961837] usb usb2: Manufacturer: Linux 3.11.0-12-generic ehci_hcd
[    1.961838] usb usb2: SerialNumber: 0000:00:1d.0
[    1.961913] hub 2-0:1.0: USB hub found
[    1.961915] hub 2-0:1.0: 2 ports detected
[    1.961990] ehci-platform: EHCI generic platform driver
[    1.961996] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.961997] ohci-platform: OHCI generic platform driver
[    1.962001] uhci_hcd: USB Universal Host Controller Interface driver
[    1.962095] xhci_hcd 0000:00:14.0: setting latency timer to 64
[    1.962098] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.962102] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    1.962189] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.962208] xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X
[    1.962251] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.962252] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.962253] usb usb3: Product: xHCI Host Controller
[    1.962255] usb usb3: Manufacturer: Linux 3.11.0-12-generic xhci_hcd
[    1.962256] usb usb3: SerialNumber: 0000:00:14.0
[    1.962315] xHCI xhci_add_endpoint called for root hub
[    1.962317] xHCI xhci_check_bandwidth called for root hub
[    1.962331] hub 3-0:1.0: USB hub found
[    1.962337] hub 3-0:1.0: 4 ports detected
[    1.962586] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.962589] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    1.962607] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    1.962608] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.962609] usb usb4: Product: xHCI Host Controller
[    1.962611] usb usb4: Manufacturer: Linux 3.11.0-12-generic xhci_hcd
[    1.962612] usb usb4: SerialNumber: 0000:00:14.0
[    1.962668] xHCI xhci_add_endpoint called for root hub
[    1.962669] xHCI xhci_check_bandwidth called for root hub
[    1.962684] hub 4-0:1.0: USB hub found
[    1.962690] hub 4-0:1.0: 4 ports detected
[    1.969870] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.986803] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.986807] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.986904] mousedev: PS/2 mouse device common for all mice
[    1.987295] rtc_cmos 00:0a: rtc core: registered rtc_cmos as rtc0
[    1.987322] rtc_cmos 00:0a: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.987366] device-mapper: uevent: version 1.0.3
[    1.987412] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: [email protected]
[    1.987477] cpuidle: using governor ladder
[    1.987563] cpuidle: using governor menu
[    1.987570] ledtrig-cpu: registered to indicate activity on CPUs
[    1.987633] TCP: cubic registered
[    1.987694] NET: Registered protocol family 10
[    1.987832] NET: Registered protocol family 17
[    1.987838] Key type dns_resolver registered
[    1.988037] PM: Hibernation image not present or could not be loaded.
[    1.988040] Loading module verification certificates
[    1.988829] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: fddf6943d8ac4f5b6eb0919a7a3ee3d9088b1bfa'
[    1.988838] registered taskstats version 1
[    1.990645] Key type trusted registered
[    1.992135] Key type encrypted registered
[    1.993575] AppArmor: AppArmor sha1 policy hashing enabled
[    1.993854]   Magic number: 6:165:934
[    1.993956] rtc_cmos 00:0a: setting system clock to 2014-03-15 11:56:25 UTC (1394884585)
[    1.994596] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.994597] EDD information not available.
[    1.995297] Freeing unused kernel memory: 1364K (ffffffff81d10000 - ffffffff81e65000)
[    1.995299] Write protecting the kernel read-only data: 12288k
[    1.997179] Freeing unused kernel memory: 1040K (ffff8800016fc000 - ffff880001800000)
[    1.998543] Freeing unused kernel memory: 836K (ffff880001b2f000 - ffff880001c00000)
[    2.008026] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    2.008522] systemd-udevd[117]: starting version 204
[    2.017802] video: module verification failed: signature and/or required key missing - tainting kernel
[    2.019171] wmi: Mapper loaded
[    2.029101] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.029359] r8169 0000:02:00.0: irq 42 for MSI/MSI-X
[    2.029507] r8169 0000:02:00.0 eth0: RTL8168f/8111f at 0xffffc9000062e000, 20:89:84:12:01:ef, XID 08000880 IRQ 42
[    2.029509] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    2.031010] ahci 0000:00:1f.2: version 3.0
[    2.031112] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[    2.031136] ahci: SSS flag set, parallel bus scan disabled
[    2.033243] [drm] Initialized drm 1.1.0 20060810
[    2.045949] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x11 impl SATA mode
[    2.045955] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst
[    2.045962] ahci 0000:00:1f.2: setting latency timer to 64
[    2.054353] scsi0 : ahci
[    2.054433] scsi1 : ahci
[    2.054495] scsi2 : ahci
[    2.054563] scsi3 : ahci
[    2.054633] scsi4 : ahci
[    2.054694] scsi5 : ahci
[    2.054796] ata1: SATA max UDMA/133 abar m2048@0xc0316000 port 0xc0316100 irq 43
[    2.054798] ata2: DUMMY
[    2.054800] ata3: DUMMY
[    2.054801] ata4: DUMMY
[    2.054804] ata5: SATA max UDMA/133 abar m2048@0xc0316000 port 0xc0316300 irq 43
[    2.054806] ata6: DUMMY
[    2.055805] [drm] Memory usable by graphics device = 2048M
[    2.055812] i915 0000:00:02.0: setting latency timer to 64
[    2.059308] [drm] radeon kernel modesetting enabled.
[    2.059321] VGA switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
[    2.059359] radeon 0000:01:00.0: enabling device (0000 -> 0003)
[    2.083528] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[    2.083538] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    2.083538] [drm] Driver supports precise vblank timestamp query.
[    2.083591] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[    2.083592] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
[    2.127785] fbcon: inteldrmfb (fb0) is primary device
[    2.266211] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.374385] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.380775] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    2.380787] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    2.380788] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    2.387009] ata1.00: ATA-8: ST500LM012 HN-M500MBB, 2AR10002, max UDMA/133
[    2.387011] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.393468] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    2.393480] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    2.393481] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    2.398897] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    2.398898] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.399249] hub 1-1:1.0: USB hub found
[    2.399318] hub 1-1:1.0: 6 ports detected
[    2.399557] ata1.00: configured for UDMA/133
[    2.399723] scsi 0:0:0:0: Direct-Access     ATA      ST500LM012 HN-M5 2AR1 PQ: 0 ANSI: 5
[    2.399929] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.399931] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.399957] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.399969] sd 0:0:0:0: [sda] Write Protect is off
[    2.399970] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.399983] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.510539] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    2.643142] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    2.643143] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.643573] hub 2-1:1.0: USB hub found
[    2.643706] hub 2-1:1.0: 6 ports detected
[    2.647473]  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10
[    2.648306] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.718786] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.720896] ata5.00: ATAPI: TSSTcorp CDDVDW SN-208DN, SC00, max UDMA/100
[    2.729006] ata5.00: configured for UDMA/100
[    2.741484] scsi 4:0:0:0: CD-ROM            TSSTcorp CDDVDW SN-208DN  SC00 PQ: 0 ANSI: 5
[    2.748789] sr0: scsi3-mmc drive: 16x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.748790] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.748941] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    2.749127] sr 4:0:0:0: Attached scsi generic sg1 type 5
[    2.810864] usb 3-1: new low-speed USB device number 2 using xhci_hcd
[    2.830542] usb 3-1: New USB device found, idVendor=046d, idProduct=c05a
[    2.830544] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.830545] usb 3-1: Product: USB Optical Mouse
[    2.830547] usb 3-1: Manufacturer: Logitech
[    2.830658] usb 3-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[    2.833176] hidraw: raw HID events driver (C) Jiri Kosina
[    2.835803] usbcore: registered new interface driver usbhid
[    2.835804] usbhid: USB HID core driver
[    2.836907] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/input/input4
[    2.837006] hid-generic 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-1/input0
[    2.866897] tsc: Refined TSC clocksource calibration: 2494.333 MHz
[    2.882938] Console: switching to colour frame buffer device 170x48
[    2.884960] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.884961] i915 0000:00:02.0: registered panic notifier
[    2.885122] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[    2.886640] acpi device:22: registered as cooling_device4
[    2.886776] ACPI: Video Device [PEGP] (multi-head: yes  rom: no  post: no)
[    2.886815] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:20/LNXVIDEO:00/input/input5
[    2.888497] acpi device:60: registered as cooling_device5
[    2.888659] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.888688] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input6
[    2.888747] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    2.888901] [drm] initializing kernel modesetting (TURKS 0x1002:0x6840 0x144D:0xC0D8).
[    2.888934] [drm] register mmio base: 0xC0220000
[    2.888936] [drm] register mmio size: 131072
[    2.888938] vga_switcheroo: enabled
[    2.888995] ATPX version 1
[    2.942961] usb 3-2: new high-speed USB device number 3 using xhci_hcd
[    3.077044] usb 3-2: New USB device found, idVendor=058f, idProduct=6387
[    3.077046] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.077048] usb 3-2: Product: Mass Storage Device
[    3.077049] usb 3-2: Manufacturer: JetFlash
[    3.077050] usb 3-2: SerialNumber: 2N86VO1H
[    3.078174] usb-storage 3-2:1.0: USB Mass Storage device detected
[    3.078247] scsi6 : usb-storage 3-2:1.0
[    3.078292] usbcore: registered new interface driver usb-storage
[    3.147276] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[    3.240138] usb 1-1.1: New USB device found, idVendor=0bda, idProduct=0129
[    3.240143] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.240147] usb 1-1.1: Product: USB2.0-CRW
[    3.240150] usb 1-1.1: Manufacturer: Generic
[    3.240153] usb 1-1.1: SerialNumber: 20100201396000000
[    3.311462] usb 1-1.2: new full-speed USB device number 4 using ehci-pci
[    3.405197] usb 1-1.2: New USB device found, idVendor=0cf3, idProduct=3004
[    3.405202] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.405205] usb 1-1.2: Product: Bluetooth USB Host Controller
[    3.405208] usb 1-1.2: Manufacturer: Atheros Communications
[    3.405211] usb 1-1.2: SerialNumber: Alaska Day 2006
[    3.475647] usb 1-1.4: new high-speed USB device number 5 using ehci-pci
[    3.612228] ATOM BIOS: Samsung
[    3.612278] [drm] GPU not posted. posting now...
[    3.615051] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[    3.615053] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[    3.615055] [drm] Detected VRAM RAM=1024M, BAR=256M
[    3.615055] [drm] RAM width 128bits DDR
[    3.615108] [TTM] Zone  kernel: Available graphics memory: 1968868 kiB
[    3.615110] [TTM] Initializing pool allocator
[    3.615113] [TTM] Initializing DMA pool allocator
[    3.615127] [drm] radeon: 1024M of VRAM memory ready
[    3.615128] [drm] radeon: 512M of GTT memory ready.
[    3.615450] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    3.615816] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[    3.617114] [drm] Loading TURKS Microcode
[    3.617655] [drm] PCIE GART of 512M enabled (table at 0x0000000000273000).
[    3.617753] radeon 0000:01:00.0: WB enabled
[    3.617755] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801337cdc00
[    3.617756] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8801337cdc0c
[    3.618281] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc900155b2118
[    3.618283] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    3.618284] [drm] Driver supports precise vblank timestamp query.
[    3.618303] radeon 0000:01:00.0: irq 45 for MSI/MSI-X
[    3.618312] radeon 0000:01:00.0: radeon: using MSI.
[    3.618344] [drm] radeon: irq initialized.
[    3.634669] [drm] ring test on 0 succeeded in 1 usecs
[    3.634728] [drm] ring test on 3 succeeded in 1 usecs
[    3.684510] usb 1-1.4: New USB device found, idVendor=2232, idProduct=1029
[    3.684512] usb 1-1.4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    3.684514] usb 1-1.4: Product: WebCam SC-13HDL11939N
[    3.684516] usb 1-1.4: Manufacturer: Generic
[    3.684518] usb 1-1.4: SerialNumber: 200901010001
[    3.831052] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[    3.831085] [drm] ring test on 5 succeeded in 1 usecs
[    3.831087] [drm] UVD initialized successfully.
[    3.831284] [drm] ib test on ring 0 succeeded in 0 usecs
[    3.831332] [drm] ib test on ring 3 succeeded in 0 usecs
[    3.981494] Switched to clocksource tsc
[    3.982255] [drm] ib test on ring 5 succeeded
[    3.982445] [drm] Radeon Display Connectors
[    3.988398] [drm] Internal thermal controller without fan control
[    3.989297] [drm] radeon: power management initialized
[    3.989416] radeon 0000:01:00.0: No connectors reported connected with modes
[    3.989418] [drm] Cannot find any crtc or sizes - going 1024x768
[    3.990295] [drm] fb mappable at 0xE0375000
[    3.990296] [drm] vram apper at 0xE0000000
[    3.990297] [drm] size 3145728
[    3.990297] [drm] fb depth is 24
[    3.990298] [drm]    pitch is 4096
[    3.990345] radeon 0000:01:00.0: fb1: radeondrmfb frame buffer device
[    3.990356] [drm] Initialized radeon 2.34.0 20080528 for 0000:01:00.0 on minor 1
[    4.077125] scsi 6:0:0:0: Direct-Access     JetFlash Transcend 4GB    8.07 PQ: 0 ANSI: 2
[    4.077510] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    4.078005] sd 6:0:0:0: [sdb] 7843840 512-byte logical blocks: (4.01 GB/3.74 GiB)
[    4.078170] sd 6:0:0:0: [sdb] Write Protect is off
[    4.078173] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
[    4.078347] sd 6:0:0:0: [sdb] No Caching mode page found
[    4.078350] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[    4.079351] sd 6:0:0:0: [sdb] No Caching mode page found
[    4.079353] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[    4.385065]  sdb: sdb1
[    4.386032] sd 6:0:0:0: [sdb] No Caching mode page found
[    4.386035] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[    4.386038] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[    6.906045] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: (null)
[   19.438179] Adding 8165372k swap on /dev/sda7.  Priority:-1 extents:1 across:8165372k FS
[   19.723771] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   19.854098] systemd-udevd[331]: starting version 204
[   19.949208] mei_me 0000:00:16.0: setting latency timer to 64
[   19.949289] mei_me 0000:00:16.0: irq 46 for MSI/MSI-X
[   19.957551] lp: driver loaded but no devices found
[   19.961090] cfg80211: Calling CRDA to update world regulatory domain
[   19.963639] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130517/utaddress-251)
[   19.963646] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   19.963650] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
[   19.963654] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20130517/utaddress-251)
[   19.963658] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   19.963659] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
[   19.963663] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20130517/utaddress-251)
[   19.963666] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   19.963668] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   19.972833] Bluetooth: Core ver 2.16
[   19.972852] NET: Registered protocol family 31
[   19.972854] Bluetooth: HCI device and connection manager initialized
[   19.972863] Bluetooth: HCI socket layer initialized
[   19.972865] Bluetooth: L2CAP socket layer initialized
[   19.972871] Bluetooth: SCO socket layer initialized
[   19.974588] usbcore: registered new interface driver btusb
[   20.009285] ath: phy0: ASPM enabled: 0x42
[   20.009288] ath: EEPROM regdomain: 0x65
[   20.009289] ath: EEPROM indicates we should expect a direct regpair map
[   20.009290] ath: Country alpha2 being used: 00
[   20.009291] ath: Regpair used: 0x65
[   20.014462] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   20.014763] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90016080000, irq=17
[   20.015968] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x15
[   20.023478] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[   20.041148] SKU: Nid=0x1d sku_cfg=0x4005822d
[   20.041151] SKU: port_connectivity=0x1
[   20.041152] SKU: enable_pcbeep=0x0
[   20.041153] SKU: check_sum=0x00000005
[   20.041154] SKU: customization=0x00000082
[   20.041154] SKU: external_amp=0x5
[   20.041155] SKU: platform_type=0x1
[   20.041156] SKU: swap=0x0
[   20.041156] SKU: override=0x1
[   20.041372] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   20.041373]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   20.041374]    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[   20.041375]    mono: mono_out=0x0
[   20.041376]    inputs:
[   20.041377]      Internal Mic=0x19
[   20.041378]      Mic=0x18
[   20.041379] realtek: No valid SSID, checking pincfg 0x4005822d for NID 0x1d
[   20.041380] realtek: Enabling init ASM_ID=0x822d CODEC_ID=10ec0269
[   20.048759] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   20.048813] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   20.048854] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   20.541961] usbcore: registered new interface driver ath3k
[   20.646447] usb 1-1.2: USB disconnect, device number 4
[   20.697508] type=1400 audit(1394877404.176:2): apparmor="STATUS" operation="profile_load" parent=379 profile="unconfined" name="/sbin/dhclient" pid=408 comm="apparmor_parser"
[   20.697516] type=1400 audit(1394877404.176:3): apparmor="STATUS" operation="profile_load" parent=379 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=408 comm="apparmor_parser"
[   20.697520] type=1400 audit(1394877404.176:4): apparmor="STATUS" operation="profile_load" parent=379 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=408 comm="apparmor_parser"
[   20.698048] type=1400 audit(1394877404.176:5): apparmor="STATUS" operation="profile_replace" parent=379 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=408 comm="apparmor_parser"
[   20.698054] type=1400 audit(1394877404.176:6): apparmor="STATUS" operation="profile_replace" parent=379 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=408 comm="apparmor_parser"
[   20.698293] type=1400 audit(1394877404.176:7): apparmor="STATUS" operation="profile_replace" parent=379 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=408 comm="apparmor_parser"
[   20.844001] usb 1-1.2: new full-speed USB device number 6 using ehci-pci
[   20.850438] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x15
[   20.855077] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15
[   20.855912] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x15
[   20.856511] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[   20.884452] rts5139: module is from the staging directory, the quality is unknown, you have been warned.
[   20.884879] Linux video capture interface: v2.00
[   20.888761] scsi7 : SCSI emulation for RTS5139 USB card reader
[   20.888902] scsi 7:0:0:0: Direct-Access     Generic- xD/SD/M.S.       1.00 PQ: 0 ANSI: 0 CCS
[   20.889353] sd 7:0:0:0: Attached scsi generic sg3 type 0
[   20.890762] usbcore: registered new interface driver rts5139
[   20.894042] uvcvideo: Found UVC 1.00 device WebCam SC-13HDL11939N (2232:1029)
[   20.905109] input: WebCam SC-13HDL11939N as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input10
[   20.905183] usbcore: registered new interface driver uvcvideo
[   20.905186] USB Video Class driver (1.1.1)
[   20.936857] samsung_laptop: detected SABI interface: SwSmi@
[   20.936860] samsung_laptop: Backlight controlled by ACPI video driver
[   20.967653] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[   21.079219] cfg80211: World regulatory domain updated:
[   21.079222] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   21.079223] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   21.079224] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   21.079225] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   21.079226] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   21.079227] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   21.222631] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xf00433/0x240000/0xa2400, board id: 1874, fw id: 1206283
[   21.295372] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11
[   24.225076] EXT4-fs (sda10): re-mounted. Opts: errors=remount-ro
[   25.943291] usb 1-1.2: New USB device found, idVendor=0cf3, idProduct=3004
[   25.943298] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   25.943302] usb 1-1.2: Product: Bluetooth USB Host Controller
[   25.943305] usb 1-1.2: Manufacturer: Atheros Communications
[   25.943308] usb 1-1.2: SerialNumber: Alaska Day 2006
[   26.840481] init: failsafe main process (699) killed by TERM signal
[   27.415446] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   27.415449] Bluetooth: BNEP filters: protocol multicast
[   27.415456] Bluetooth: BNEP socket layer initialized
[   27.416483] Bluetooth: RFCOMM TTY layer initialized
[   27.416494] Bluetooth: RFCOMM socket layer initialized
[   27.416496] Bluetooth: RFCOMM ver 1.11
[   27.787060] type=1400 audit(1394877411.256:8): apparmor="STATUS" operation="profile_load" parent=841 profile="unconfined" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=846 comm="apparmor_parser"
[   27.787070] type=1400 audit(1394877411.256:9): apparmor="STATUS" operation="profile_load" parent=841 profile="unconfined" name="chromium_browser" pid=846 comm="apparmor_parser"
[   27.787499] type=1400 audit(1394877411.260:10): apparmor="STATUS" operation="profile_replace" parent=841 profile="unconfined" name="chromium_browser" pid=846 comm="apparmor_parser"
[   27.787526] type=1400 audit(1394877411.260:11): apparmor="STATUS" operation="profile_load" parent=841 profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=849 comm="apparmor_parser"
[   27.787532] type=1400 audit(1394877411.260:12): apparmor="STATUS" operation="profile_load" parent=841 profile="unconfined" name="/usr/sbin/cupsd" pid=849 comm="apparmor_parser"
[   27.787828] type=1400 audit(1394877411.260:13): apparmor="STATUS" operation="profile_load" parent=841 profile="unconfined" name="/usr/lib/telepathy/mission-control-5" pid=848 comm="apparmor_parser"
[   27.787836] type=1400 audit(1394877411.260:14): apparmor="STATUS" operation="profile_load" parent=841 profile="unconfined" name="/usr/lib/telepathy/telepathy-*" pid=848 comm="apparmor_parser"
[   27.787841] type=1400 audit(1394877411.260:15): apparmor="STATUS" operation="profile_load" parent=841 profile="unconfined" name="pxgsettings" pid=848 comm="apparmor_parser"
[   27.787846] type=1400 audit(1394877411.260:16): apparmor="STATUS" operation="profile_load" parent=841 profile="unconfined" name="sanitized_helper" pid=848 comm="apparmor_parser"
[   27.787851] type=1400 audit(1394877411.260:17): apparmor="STATUS" operation="profile_load" parent=841 profile="unconfined" name="/usr/lib/telepathy/telepathy-ofono" pid=848 comm="apparmor_parser"
[   27.996234] init: avahi-cups-reload main process (869) terminated with status 1
[   28.151740] ppdev: user-space parallel port driver
[   30.381284] r8169 0000:02:00.0 eth0: link down
[   30.381329] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   30.381593] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   30.394192] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   30.394360] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   32.173190] wlan0: authenticate with 14:60:80:98:c1:ec
[   32.184086] wlan0: send auth to 14:60:80:98:c1:ec (try 1/3)
[   32.186098] wlan0: authenticated
[   32.188355] wlan0: associate with 14:60:80:98:c1:ec (try 1/3)
[   32.192445] wlan0: RX AssocResp from 14:60:80:98:c1:ec (capab=0x411 status=0 aid=1)
[   32.192494] wlan0: associated
[   32.192500] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   32.192645] cfg80211: Calling CRDA for country: HK
[   32.194542] ath: regdomain 0x8158 updated by CountryIE
[   32.194544] ath: EEPROM regdomain: 0x8158
[   32.194545] ath: EEPROM indicates we should expect a country code
[   32.194546] ath: doing EEPROM country->regdmn map search
[   32.194547] ath: country maps to regdmn code: 0x3b
[   32.194548] ath: Country alpha2 being used: HK
[   32.194548] ath: Regpair used: 0x3b
[   32.194564] cfg80211: Regulatory domain changed to country: HK
[   32.194565] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   32.194566] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   32.194567] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[   32.194568] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   32.194569] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   32.194570] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 7440.637861] show_signal_msg: 72 callbacks suppressed
[ 7440.637866] chromium-browse[3526]: segfault at 0 ip           (null) sp 00007fff56e98708 error 14
[ 7917.555362] perf samples too long (2513 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[15138.639331] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[15140.121831] FAT-fs (sdb1): error, invalid access to FAT (entry 0xbee63cc1)
[15140.121835] FAT-fs (sdb1): Filesystem has been set read-only
[15140.121890] FAT-fs (sdb1): error, invalid access to FAT (entry 0x027c0d40)
[15140.121937] FAT-fs (sdb1): error, invalid access to FAT (entry 0xd73f4692)
[15140.121982] FAT-fs (sdb1): error, invalid access to FAT (entry 0xc6b8a688)
[15140.122026] FAT-fs (sdb1): error, invalid access to FAT (entry 0x29f5e803)
[15140.122068] FAT-fs (sdb1): error, invalid access to FAT (entry 0xc2506df9)
[15140.122110] FAT-fs (sdb1): error, invalid access to FAT (entry 0x986f859a)
[15140.122156] FAT-fs (sdb1): error, invalid access to FAT (entry 0xe6c5d8d1)
[15140.122200] FAT-fs (sdb1): error, invalid access to FAT (entry 0x75203fde)
[15140.122244] FAT-fs (sdb1): error, invalid access to FAT (entry 0xedda844e)
[15140.122289] FAT-fs (sdb1): error, invalid access to FAT (entry 0xf17d2a0f)
[15140.122334] FAT-fs (sdb1): error, invalid access to FAT (entry 0xfc366b77)
[15140.122386] FAT-fs (sdb1): error, invalid access to FAT (entry 0x785356e0)
[15140.122438] FAT-fs (sdb1): error, invalid access to FAT (entry 0xbeeaf904)
[15140.122484] FAT-fs (sdb1): error, invalid access to FAT (entry 0xdee7eaec)
[15140.122535] FAT-fs (sdb1): error, invalid access to FAT (entry 0x65f3a524)
[15140.122582] FAT-fs (sdb1): error, invalid access to FAT (entry 0xb8ff8496)
[15140.122633] FAT-fs (sdb1): error, invalid access to FAT (entry 0xc87cae82)
[15140.122682] FAT-fs (sdb1): error, invalid access to FAT (entry 0xbad86f44)
[15140.122732] FAT-fs (sdb1): error, invalid access to FAT (entry 0x98759651)
[15140.122781] FAT-fs (sdb1): error, invalid access to FAT (entry 0x7e703712)
[15140.122834] FAT-fs (sdb1): error, invalid access to FAT (entry 0xd58460ab)
[15140.122884] FAT-fs (sdb1): error, invalid access to FAT (entry 0xdd65b811)
[15140.122934] FAT-fs (sdb1): error, invalid access to FAT (entry 0x69c43443)
[15140.122990] FAT-fs (sdb1): error, invalid access to FAT (entry 0x426031e7)
[15140.123043] FAT-fs (sdb1): error, invalid access to FAT (entry 0x15838012)
[15140.123096] FAT-fs (sdb1): error, invalid access to FAT (entry 0x35b7911b)
[15140.123148] FAT-fs (sdb1): error, invalid access to FAT (entry 0xc420fd0b)
[15140.123220] FAT-fs (sdb1): error, invalid access to FAT (entry 0x0074dfdf)
[15140.123303] FAT-fs (sdb1): error, invalid access to FAT (entry 0x817cf53e)
[15140.123391] FAT-fs (sdb1): error, invalid access to FAT (entry 0x02a62f7a)
[15140.123483] FAT-fs (sdb1): error, invalid access to FAT (entry 0xf9dcafc1)
[15140.123575] FAT-fs (sdb1): error, invalid access to FAT (entry 0x5e79a2e1)
[15140.123674] FAT-fs (sdb1): error, invalid access to FAT (entry 0x36a35d67)
[15140.125185] FAT-fs (sdb1): error, invalid access to FAT (entry 0x50be6dcb)
[15140.125298] FAT-fs (sdb1): error, invalid access to FAT (entry 0x7e5db292)
[15140.125397] FAT-fs (sdb1): error, invalid access to FAT (entry 0xddcd02b3)
[15140.125494] FAT-fs (sdb1): error, invalid access to FAT (entry 0x2bdc8367)
[15140.125611] FAT-fs (sdb1): error, invalid access to FAT (entry 0xce5c1bb9)
[15140.125712] FAT-fs (sdb1): error, invalid access to FAT (entry 0xd70617d2)
[15140.125817] FAT-fs (sdb1): error, invalid access to FAT (entry 0x7041fca2)
[15140.125926] FAT-fs (sdb1): error, invalid access to FAT (entry 0xba53df3d)
[15140.126031] FAT-fs (sdb1): error, invalid access to FAT (entry 0xeda71421)
[15140.126132] FAT-fs (sdb1): error, invalid access to FAT (entry 0x85366aea)
[15140.126244] FAT-fs (sdb1): error, invalid access to FAT (entry 0xb2854490)
[15140.126350] FAT-fs (sdb1): error, invalid access to FAT (entry 0x8e0c0d6b)
[15140.126455] FAT-fs (sdb1): error, invalid access to FAT (entry 0x8cf4dc1a)
[15140.126692] FAT-fs (sdb1): error, invalid access to FAT (entry 0xf5e53611)
[15140.126810] FAT-fs (sdb1): error, invalid access to FAT (entry 0xc8da330a)
[15140.126925] FAT-fs (sdb1): error, invalid access to FAT (entry 0x37ecd0f9)
[15140.127045] FAT-fs (sdb1): error, invalid access to FAT (entry 0xca21f6c0)
[15140.127168] FAT-fs (sdb1): error, invalid access to FAT (entry 0x730e1112)
[15140.127314] FAT-fs (sdb1): error, invalid access to FAT (entry 0x473e0ef9)
[15140.127385] FAT-fs (sdb1): error, invalid access to FAT (entry 0xff33b1a2)
[15140.127448] FAT-fs (sdb1): error, invalid access to FAT (entry 0xe9274fa0)
[15140.127510] FAT-fs (sdb1): error, invalid access to FAT (entry 0xfc332a51)
[15140.127754] FAT-fs (sdb1): error, invalid access to FAT (entry 0x09543554)
[15140.127877] FAT-fs (sdb1): error, invalid access to FAT (entry 0x8b8196a5)
[15140.128009] FAT-fs (sdb1): error, invalid access to FAT (entry 0x4060ffc9)
[15140.128131] FAT-fs (sdb1): error, invalid access to FAT (entry 0xc6e5ac49)
[15140.128246] FAT-fs (sdb1): error, invalid access to FAT (entry 0x03929dd4)
[15140.128381] FAT-fs (sdb1): error, invalid access to FAT (entry 0xfee89d6d)
[15140.128507] FAT-fs (sdb1): error, invalid access to FAT (entry 0x27db7590)
[15140.128652] FAT-fs (sdb1): error, invalid access to FAT (entry 0x0e014003)
[15140.128793] FAT-fs (sdb1): error, invalid access to FAT (entry 0x9656437d)
[15140.129039] FAT-fs (sdb1): error, invalid access to FAT (entry 0xc965d4bc)
[15140.129192] FAT-fs (sdb1): error, invalid access to FAT (entry 0x6d463838)
[15140.130821] FAT-fs (sdb1): error, invalid access to FAT (entry 0x588bd413)
[15140.130921] FAT-fs (sdb1): error, invalid access to FAT (entry 0xddb470e9)
[15140.131020] FAT-fs (sdb1): error, invalid access to FAT (entry 0x281a04cc)
[15140.131120] FAT-fs (sdb1): error, invalid access to FAT (entry 0x777ee95d)
[15140.131267] FAT-fs (sdb1): error, invalid access to FAT (entry 0x3c6cf278)
[15140.131347] FAT-fs (sdb1): error, invalid access to FAT (entry 0x62c8fe18)
[15140.131399] FAT-fs (sdb1): error, invalid access to FAT (entry 0xf8b1ddca)
[15140.131452] FAT-fs (sdb1): error, invalid access to FAT (entry 0xdb053a2b)
[15140.131505] FAT-fs (sdb1): error, invalid access to FAT (entry 0x814d78bb)
[15140.131611] FAT-fs (sdb1): error, invalid access to FAT (entry 0x2905f71f)
[15140.131716] FAT-fs (sdb1): error, invalid access to FAT (entry 0xb89700ab)
[15140.131827] FAT-fs (sdb1): error, invalid access to FAT (entry 0x8dd3d391)
[15140.131931] FAT-fs (sdb1): error, invalid access to FAT (entry 0x395997b6)
[15140.132040] FAT-fs (sdb1): error, invalid access to FAT (entry 0x411b7c8e)
[15140.132163] FAT-fs (sdb1): error, invalid access to FAT (entry 0x1c342a8a)
[15140.132272] FAT-fs (sdb1): error, invalid access to FAT (entry 0x647771ad)
[15140.132380] FAT-fs (sdb1): error, invalid access to FAT (entry 0x1083530b)
[15140.132489] FAT-fs (sdb1): error, invalid access to FAT (entry 0xa6199703)
[15140.132599] FAT-fs (sdb1): error, invalid access to FAT (entry 0xbb692d15)
[15140.132717] FAT-fs (sdb1): error, invalid access to FAT (entry 0x736d04f0)
[15140.132835] FAT-fs (sdb1): error, invalid access to FAT (entry 0xa90b0cd9)
[15140.132948] FAT-fs (sdb1): error, invalid access to FAT (entry 0x77e95116)
[15140.133065] FAT-fs (sdb1): error, invalid access to FAT (entry 0x85db4dd3)
[15140.133179] FAT-fs (sdb1): error, invalid access to FAT (entry 0x29c33948)
[15140.133302] FAT-fs (sdb1): error, invalid access to FAT (entry 0x81b39799)
[15140.133417] FAT-fs (sdb1): error, invalid access to FAT (entry 0x51bb616a)
[15140.133542] FAT-fs (sdb1): error, invalid access to FAT (entry 0x60625424)
[15140.133621] FAT-fs (sdb1): error, invalid access to FAT (entry 0x9e9b0073)
[15140.133710] FAT-fs (sdb1): error, invalid access to FAT (entry 0xf7fde8bf)
[15140.133833] FAT-fs (sdb1): error, invalid access to FAT (entry 0x6e3cd822)
[15140.133964] FAT-fs (sdb1): error, invalid access to FAT (entry 0x64d9b16b)
[15140.134129] FAT-fs (sdb1): error, invalid access to FAT (entry 0x6c397d97)
[16845.935511] usb 3-3: new high-speed USB device number 4 using xhci_hcd
[16845.953358] usb 3-3: New USB device found, idVendor=10d6, idProduct=1101
[16845.953363] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[16845.953366] usb 3-3: Product: HS USB FlashDisk
[16845.953368] usb 3-3: Manufacturer: ACTIONS
[16845.953370] usb 3-3: SerialNumber: \xffffffe3\xffffff89\xffffff95\xffffff89\xffffff95\xffffffe6\xffffff8d\xffffffa4\xffffff8d\xffffffa4\xffffffe7\xffffffa8\xffffffb0\xffffffa8\xffffffb0\xffffffe7\xffffff9c\xffffffb7\xffffff9c\xffffffb7\xffffffe3\xffffff95\xffffffb3\xffffff95\xffffffb3\xffffffe6\xffffff84\xffffffb3\xffffff84\xffffffb3\xffffffe3\xffffffa4\xffffffb7\xffffffa4\xffffffb7\xffffffe6\xffffffb9\xffffffb2\xffffffb9\xffffffb2
[16845.953889] usb-storage 3-3:1.0: USB Mass Storage device detected
[16845.954235] scsi8 : usb-storage 3-3:1.0
[16846.953071] scsi 8:0:0:0: Direct-Access     ACTIONS  HS USB FlashDisk 2.00 PQ: 0 ANSI: 0 CCS
[16846.954080] sd 8:0:0:0: Attached scsi generic sg4 type 0
[16846.957539] sd 8:0:0:0: [sdd] 3893112 1024-byte logical blocks: (3.98 GB/3.71 GiB)
[16846.958255] sd 8:0:0:0: [sdd] Write Protect is off
[16846.958258] sd 8:0:0:0: [sdd] Mode Sense: 00 c0 00 00
[16846.958613] sd 8:0:0:0: [sdd] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
[16846.960281] sd 8:0:0:0: [sdd] 3893112 1024-byte logical blocks: (3.98 GB/3.71 GiB)
[16846.961640]  sdd:
[16846.966819] sd 8:0:0:0: [sdd] 3893112 1024-byte logical blocks: (3.98 GB/3.71 GiB)
[16846.967661] sd 8:0:0:0: [sdd] Attached SCSI removable disk
[16849.756659] FAT-fs (sdd): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[17069.817526] usb 3-3: USB disconnect, device number 4
[17081.348374] usb 3-3: new high-speed USB device number 5 using xhci_hcd
[17081.366300] usb 3-3: New USB device found, idVendor=10d6, idProduct=1101
[17081.366304] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[17081.366307] usb 3-3: Product: HS USB FlashDisk
[17081.366309] usb 3-3: Manufacturer: ACTIONS
[17081.366311] usb 3-3: SerialNumber: \xffffffe3\xffffff89\xffffff95\xffffff89\xffffff95\xffffffe6\xffffff8d\xffffffa4\xffffff8d\xffffffa4\xffffffe7\xffffffa8\xffffffb0\xffffffa8\xffffffb0\xffffffe7\xffffff9c\xffffffb7\xffffff9c\xffffffb7\xffffffe3\xffffff95\xffffffb3\xffffff95\xffffffb3\xffffffe6\xffffff84\xffffffb3\xffffff84\xffffffb3\xffffffe3\xffffffa4\xffffffb7\xffffffa4\xffffffb7\xffffffe6\xffffffb9\xffffffb2\xffffffb9\xffffffb2
[17081.366571] usb-storage 3-3:1.0: USB Mass Storage device detected
[17081.367004] scsi9 : usb-storage 3-3:1.0
[17082.365913] scsi 9:0:0:0: Direct-Access     ACTIONS  HS USB FlashDisk 2.00 PQ: 0 ANSI: 0 CCS
[17082.366626] sd 9:0:0:0: Attached scsi generic sg4 type 0
[17082.366860] sd 9:0:0:0: [sdd] 3893112 1024-byte logical blocks: (3.98 GB/3.71 GiB)
[17082.367192] sd 9:0:0:0: [sdd] Write Protect is off
[17082.367195] sd 9:0:0:0: [sdd] Mode Sense: 00 c0 00 00
[17082.367525] sd 9:0:0:0: [sdd] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
[17082.368141] sd 9:0:0:0: [sdd] 3893112 1024-byte logical blocks: (3.98 GB/3.71 GiB)
[17082.369488]  sdd:
[17082.374727] sd 9:0:0:0: [sdd] 3893112 1024-byte logical blocks: (3.98 GB/3.71 GiB)
[17082.375413] sd 9:0:0:0: [sdd] Attached SCSI removable disk
[17089.127181] FAT-fs (sdd): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[17176.713385] usb 3-3: USB disconnect, device number 5
[17176.721314] sd 9:0:0:0: [sdd] Unhandled error code
[17176.721318] sd 9:0:0:0: [sdd]
[17176.721320] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[17176.721322] sd 9:0:0:0: [sdd] CDB:
[17176.721323] Write(10): 2a 00 00 2d ff 70 00 00 78 00 00 00
[17176.721331] end_request: I/O error, dev sdd, sector 6029024
[17176.721841] sd 9:0:0:0: [sdd] Unhandled error code
[17176.721843] sd 9:0:0:0: [sdd]
[17176.721844] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[17176.721846] sd 9:0:0:0: [sdd] CDB:
[17176.721847] Write(10): 2a 00 00 2d ff e8 00 00 78 00
[17176.721853] end_request: I/O error, dev sdd, sector 6029264
[17236.185230] usb 3-3: new high-speed USB device number 6 using xhci_hcd
[17236.203131] usb 3-3: New USB device found, idVendor=10d6, idProduct=1101
[17236.203135] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[17236.203137] usb 3-3: Product: HS USB FlashDisk
[17236.203140] usb 3-3: Manufacturer: ACTIONS
[17236.203142] usb 3-3: SerialNumber: \xffffffe3\xffffff89\xffffff95\xffffff89\xffffff95\xffffffe6\xffffff8d\xffffffa4\xffffff8d\xffffffa4\xffffffe7\xffffffa8\xffffffb0\xffffffa8\xffffffb0\xffffffe7\xffffff9c\xffffffb7\xffffff9c\xffffffb7\xffffffe3\xffffff95\xffffffb3\xffffff95\xffffffb3\xffffffe6\xffffff84\xffffffb3\xffffff84\xffffffb3\xffffffe3\xffffffa4\xffffffb7\xffffffa4\xffffffb7\xffffffe6\xffffffb9\xffffffb2\xffffffb9\xffffffb2
[17236.204219] usb-storage 3-3:1.0: USB Mass Storage device detected
[17236.204290] scsi10 : usb-storage 3-3:1.0
[17237.202780] scsi 10:0:0:0: Direct-Access     ACTIONS  HS USB FlashDisk 2.00 PQ: 0 ANSI: 0 CCS
[17237.203030] sd 10:0:0:0: Attached scsi generic sg4 type 0
[17237.203228] sd 10:0:0:0: [sdd] 3893112 1024-byte logical blocks: (3.98 GB/3.71 GiB)
[17237.203565] sd 10:0:0:0: [sdd] Write Protect is off
[17237.203569] sd 10:0:0:0: [sdd] Mode Sense: 00 c0 00 00
[17237.203895] sd 10:0:0:0: [sdd] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
[17237.205076] sd 10:0:0:0: [sdd] 3893112 1024-byte logical blocks: (3.98 GB/3.71 GiB)
[17237.206511]  sdd:
[17237.212529] sd 10:0:0:0: [sdd] 3893112 1024-byte logical blocks: (3.98 GB/3.71 GiB)
[17237.213372] sd 10:0:0:0: [sdd] Attached SCSI removable disk
[17244.265686] FAT-fs (sdd): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[17394.075828] usb 3-3: USB disconnect, device number 6
[17397.285221] usb 3-3: new high-speed USB device number 7 using xhci_hcd
[17397.303113] usb 3-3: New USB device found, idVendor=10d6, idProduct=1101
[17397.303117] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[17397.303120] usb 3-3: Product: HS USB FlashDisk
[17397.303122] usb 3-3: Manufacturer: ACTIONS
[17397.303124] usb 3-3: SerialNumber: \xffffffe3\xffffff89\xffffff95\xffffff89\xffffff95\xffffffe6\xffffff8d\xffffffa4\xffffff8d\xffffffa4\xffffffe7\xffffffa8\xffffffb0\xffffffa8\xffffffb0\xffffffe7\xffffff9c\xffffffb7\xffffff9c\xffffffb7\xffffffe3\xffffff95\xffffffb3\xffffff95\xffffffb3\xffffffe6\xffffff84\xffffffb3\xffffff84\xffffffb3\xffffffe3\xffffffa4\xffffffb7\xffffffa4\xffffffb7\xffffffe6\xffffffb9\xffffffb2\xffffffb9\xffffffb2
[17397.303396] usb-storage 3-3:1.0: USB Mass Storage device detected
[17397.303910] scsi11 : usb-storage 3-3:1.0
[17398.302784] scsi 11:0:0:0: Direct-Access     ACTIONS  HS USB FlashDisk 2.00 PQ: 0 ANSI: 0 CCS
[17398.303029] sd 11:0:0:0: Attached scsi generic sg4 type 0
[17398.303199] sd 11:0:0:0: [sdd] 3893112 1024-byte logical blocks: (3.98 GB/3.71 GiB)
[17398.303546] sd 11:0:0:0: [sdd] Write Protect is off
[17398.303548] sd 11:0:0:0: [sdd] Mode Sense: 00 c0 00 00
[17398.303878] sd 11:0:0:0: [sdd] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
[17398.304998] sd 11:0:0:0: [sdd] 3893112 1024-byte logical blocks: (3.98 GB/3.71 GiB)
[17398.306589]  sdd:
[17398.311662] sd 11:0:0:0: [sdd] 3893112 1024-byte logical blocks: (3.98 GB/3.71 GiB)
[17398.312410] sd 11:0:0:0: [sdd] Attached SCSI removable disk
[18017.869256] FAT-fs (sdd): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[18039.352285] FAT-fs (sdd): error, fat_get_cluster: invalid cluster chain (i_pos 7028088)
[18039.352290] FAT-fs (sdd): Filesystem has been set read-only
[18039.352300] FAT-fs (sdd): error, fat_get_cluster: invalid cluster chain (i_pos 7028088)
[18039.352302] FAT-fs (sdd): error, fat_get_cluster: invalid cluster chain (i_pos 7028088)
[18039.352304] FAT-fs (sdd): error, fat_get_cluster: invalid cluster chain (i_pos 7028088)
[18039.352306] FAT-fs (sdd): error, fat_get_cluster: invalid cluster chain (i_pos 7028088)
[18039.352309] FAT-fs (sdd): error, fat_get_cluster: invalid cluster chain (i_pos 7028088)
[18039.352311] FAT-fs (sdd): error, fat_get_cluster: invalid cluster chain (i_pos 7028088)
[18039.352313] FAT-fs (sdd): error, fat_get_cluster: invalid cluster chain (i_pos 7028088)
[18039.352315] FAT-fs (sdd): error, fat_get_cluster: invalid cluster chain (i_pos 7028088)
[18039.352317] FAT-fs (sdd): error, fat_get_cluster: invalid cluster chain (i_pos 7028088)
[18144.714253] fat_get_cluster: 99 callbacks suppressed
[18144.714259] FAT-fs (sdd): error, fat_get_cluster: invalid cluster chain (i_pos 7028088)
[18144.714263] FAT-fs (sdd): error, fat_get_cluster: invalid cluster chain (i_pos 7028088)
[18144.714265] FAT-fs (sdd): error, fat_get_cluster: invalid cluster chain (i_pos 7028088)
[18144.714267] FAT-fs (sdd): error, fat_get_cluster: invalid cluster chain (i_pos 7028088)
[18144.714273] FAT-fs (sdd): error, fat_get_cluster: invalid cluster chain (i_pos 7028088)
[18144.714276] FAT-fs (sdd): error, fat_get_cluster: invalid cluster chain (i_pos 7028088)
[18144.714278] FAT-fs (sdd): error, fat_get_cluster: invalid cluster chain (i_pos 7028088)
[18144.714280] FAT-fs (sdd): error, fat_get_cluster: invalid cluster chain (i_pos 7028088)
[18144.714371] FAT-fs (sdd): error, fat_get_cluster: invalid cluster chain (i_pos 7028088)
[18144.714373] FAT-fs (sdd): error, fat_get_cluster: invalid cluster chain (i_pos 7028088)
[18150.558481] fat_get_cluster: 94 callbacks suppressed
[18150.558486] FAT-fs (sdd): error, fat_get_cluster: invalid cluster chain (i_pos 7028088)
[18150.558490] FAT-fs (sdd): error, fat_get_cluster: invalid cluster chain (i_pos 7028088)
[18150.558492] FAT-fs (sdd): error, fat_get_cluster: invalid cluster chain (i_pos 7028088)
[18150.558494] FAT-fs (sdd): error, fat_get_cluster: invalid cluster chain (i_pos 7028088)
[18150.558500] FAT-fs (sdd): error, fat_get_cluster: invalid cluster chain (i_pos 7028088)
[18150.558503] FAT-fs (sdd): error, fat_get_cluster: invalid cluster chain (i_pos 7028088)
[18150.558505] FAT-fs (sdd): error, fat_get_cluster: invalid cluster chain (i_pos 7028088)
[18150.558507] FAT-fs (sdd): error, fat_get_cluster: invalid cluster chain (i_pos 7028088)
[18150.558596] FAT-fs (sdd): error, fat_get_cluster: invalid cluster chain (i_pos 7028088)
[18150.558599] FAT-fs (sdd): error, fat_get_cluster: invalid cluster chain (i_pos 7028088)
[18156.863569] fat_get_cluster: 54 callbacks suppressed
[18156.863575] FAT-fs (sdd): error, fat_get_cluster: invalid cluster chain (i_pos 7028088)
[18156.863578] FAT-fs (sdd): error, fat_get_cluster: invalid cluster chain (i_pos 7028088)
[18156.863580] FAT-fs (sdd): error, fat_get_cluster: invalid cluster chain (i_pos 7028088)
[18156.863582] FAT-fs (sdd): error, fat_get_cluster: invalid cluster chain (i_pos 7028088)
[18156.863588] FAT-fs (sdd): error, fat_get_cluster: invalid cluster chain (i_pos 7028088)
[18156.863590] FAT-fs (sdd): error, fat_get_cluster: invalid cluster chain (i_pos 7028088)
[18156.863592] FAT-fs (sdd): error, fat_get_cluster: invalid cluster chain (i_pos 7028088)
[18156.863594] FAT-fs (sdd): error, fat_get_cluster: invalid cluster chain (i_pos 7028088)
[18156.863680] FAT-fs (sdd): error, fat_get_cluster: invalid cluster chain (i_pos 7028088)
[18156.863683] FAT-fs (sdd): error, fat_get_cluster: invalid cluster chain (i_pos 7028088)
[18219.087029] fat_get_cluster: 42 callbacks suppressed
[18219.087036] FAT-fs (sdd): error, fat_get_cluster: invalid cluster chain (i_pos 7028088)
[18219.087040] FAT-fs (sdd): error, fat_get_cluster: invalid cluster chain (i_pos 7028088)
[18219.087042] FAT-fs (sdd): error, fat_get_cluster: invalid cluster chain (i_pos 7028088)
[18219.087044] FAT-fs (sdd): error, fat_get_cluster: invalid cluster chain (i_pos 7028088)
[18219.087046] FAT-fs (sdd): error, fat_get_cluster: invalid cluster chain (i_pos 7028088)
[18219.087048] FAT-fs (sdd): error, fat_get_cluster: invalid cluster chain (i_pos 7028088)
[18219.087050] FAT-fs (sdd): error, fat_get_cluster: invalid cluster chain (i_pos 7028088)
[18219.087053] FAT-fs (sdd): error, fat_get_cluster: invalid cluster chain (i_pos 7028088)
[18219.087054] FAT-fs (sdd): error, fat_get_cluster: invalid cluster chain (i_pos 7028088)
[18219.087056] FAT-fs (sdd): error, fat_get_cluster: invalid cluster chain (i_pos 7028088)
[18239.419802] usb 3-3: USB disconnect, device number 7
[18247.892741] usb 3-3: new high-speed USB device number 8 using xhci_hcd
[18247.910680] usb 3-3: New USB device found, idVendor=10d6, idProduct=1101
[18247.910685] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[18247.910688] usb 3-3: Product: HS USB FlashDisk
[18247.910690] usb 3-3: Manufacturer: ACTIONS
[18247.910692] usb 3-3: SerialNumber: \xffffffe3\xffffff89\xffffff95\xffffff89\xffffff95\xffffffe6\xffffff8d\xffffffa4\xffffff8d\xffffffa4\xffffffe7\xffffffa8\xffffffb0\xffffffa8\xffffffb0\xffffffe7\xffffff9c\xffffffb7\xffffff9c\xffffffb7\xffffffe3\xffffff95\xffffffb3\xffffff95\xffffffb3\xffffffe6\xffffff84\xffffffb3\xffffff84\xffffffb3\xffffffe3\xffffffa4\xffffffb7\xffffffa4\xffffffb7\xffffffe6\xffffffb9\xffffffb2\xffffffb9\xffffffb2
[18247.911580] usb-storage 3-3:1.0: USB Mass Storage device detected
[18247.911674] scsi12 : usb-storage 3-3:1.0
[18248.910316] scsi 12:0:0:0: Direct-Access     ACTIONS  HS USB FlashDisk 2.00 PQ: 0 ANSI: 0 CCS
[18248.910546] sd 12:0:0:0: Attached scsi generic sg4 type 0
[18248.910754] sd 12:0:0:0: [sdd] 3893112 1024-byte logical blocks: (3.98 GB/3.71 GiB)
[18248.911089] sd 12:0:0:0: [sdd] Write Protect is off
[18248.911093] sd 12:0:0:0: [sdd] Mode Sense: 00 c0 00 00
[18248.911428] sd 12:0:0:0: [sdd] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
[18248.911937] sd 12:0:0:0: [sdd] 3893112 1024-byte logical blocks: (3.98 GB/3.71 GiB)
[18248.913315]  sdd:
[18248.918547] sd 12:0:0:0: [sdd] 3893112 1024-byte logical blocks: (3.98 GB/3.71 GiB)
[18248.919314] sd 12:0:0:0: [sdd] Attached SCSI removable disk
[18250.114309] FAT-fs (sdd): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[18344.765930] FAT-fs (sdd): error, fat_get_cluster: invalid cluster chain (i_pos 7028088)
[18344.765934] FAT-fs (sdd): Filesystem has been set read-only
[18344.765943] FAT-fs (sdd): error, fat_get_cluster: invalid cluster chain (i_pos 7028088)
[18344.765945] FAT-fs (sdd): error, fat_get_cluster: invalid cluster chain (i_pos 7028088)
[18344.765946] FAT-fs (sdd): error, fat_get_cluster: invalid cluster chain (i_pos 7028088)
[18344.765947] FAT-fs (sdd): error, fat_get_cluster: invalid cluster chain (i_pos 7028088)
[18344.765949] FAT-fs (sdd): error, fat_get_cluster: invalid cluster chain (i_pos 7028088)
[18344.765951] FAT-fs (sdd): error, fat_get_cluster: invalid cluster chain (i_pos 7028088)
[18344.765952] FAT-fs (sdd): error, fat_get_cluster: invalid cluster chain (i_pos 7028088)
[18344.765953] FAT-fs (sdd): error, fat_get_cluster: invalid cluster chain (i_pos 7028088)
[18344.765955] FAT-fs (sdd): error, fat_get_cluster: invalid cluster chain (i_pos 7028088)
[18519.586775] usb 3-3: USB disconnect, device number 8
[25063.592545] fat__get_entry: 99 callbacks suppressed
[25063.592550] FAT-fs (sdd): Directory bread(block 219624) failed
[25063.592553] FAT-fs (sdd): Directory bread(block 219625) failed
[25063.592555] FAT-fs (sdd): Directory bread(block 219626) failed
[25063.592557] FAT-fs (sdd): Directory bread(block 219627) failed
[25063.592560] FAT-fs (sdd): Directory bread(block 219628) failed
[25063.592562] FAT-fs (sdd): Directory bread(block 219629) failed
[25063.592564] FAT-fs (sdd): Directory bread(block 219630) failed
[25063.592566] FAT-fs (sdd): Directory bread(block 219631) failed
[91318.233647] usb 3-3: new high-speed USB device number 9 using xhci_hcd
[91318.252335] usb 3-3: New USB device found, idVendor=10d6, idProduct=1101
[91318.252340] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[91318.252342] usb 3-3: Product: HS USB FlashDisk
[91318.252344] usb 3-3: Manufacturer: ACTIONS
[91318.252346] usb 3-3: SerialNumber: \xffffffe3\xffffff89\xffffff95\xffffff89\xffffff95\xffffffe6\xffffff8d\xffffffa4\xffffff8d\xffffffa4\xffffffe7\xffffffa8\xffffffb0\xffffffa8\xffffffb0\xffffffe7\xffffff9c\xffffffb7\xffffff9c\xffffffb7\xffffffe3\xffffff95\xffffffb3\xffffff95\xffffffb3\xffffffe6\xffffff84\xffffffb3\xffffff84\xffffffb3\xffffffe3\xffffffa4\xffffffb7\xffffffa4\xffffffb7\xffffffe6\xffffffb9\xffffffb2\xffffffb9\xffffffb2
[91318.252598] usb-storage 3-3:1.0: USB Mass Storage device detected
[91318.253111] scsi13 : usb-storage 3-3:1.0
[91319.251193] scsi 13:0:0:0: Direct-Access     ACTIONS  HS USB FlashDisk 2.00 PQ: 0 ANSI: 0 CCS
[91319.254337] sd 13:0:0:0: Attached scsi generic sg4 type 0
[91319.255277] sd 13:0:0:0: [sde] 3893112 1024-byte logical blocks: (3.98 GB/3.71 GiB)
[91319.255629] sd 13:0:0:0: [sde] Write Protect is off
[91319.255632] sd 13:0:0:0: [sde] Mode Sense: 00 c0 00 00
[91319.256150] sd 13:0:0:0: [sde] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
[91319.257316] sd 13:0:0:0: [sde] 3893112 1024-byte logical blocks: (3.98 GB/3.71 GiB)
[91319.259007]  sde:
[91319.264292] sd 13:0:0:0: [sde] 3893112 1024-byte logical blocks: (3.98 GB/3.71 GiB)
[91319.265055] sd 13:0:0:0: [sde] Attached SCSI removable disk
[91334.209612] FAT-fs (sde): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[96820.215869] FAT-fs (sdd): Directory bread(block 219624) failed
[96820.215877] FAT-fs (sdd): Directory bread(block 219625) failed
[96820.215881] FAT-fs (sdd): Directory bread(block 219626) failed
[96820.215884] FAT-fs (sdd): Directory bread(block 219627) failed
[96820.215887] FAT-fs (sdd): Directory bread(block 219628) failed
[96820.215891] FAT-fs (sdd): Directory bread(block 219629) failed
[96820.215894] FAT-fs (sdd): Directory bread(block 219630) failed
[96820.215897] FAT-fs (sdd): Directory bread(block 219631) failed
[105140.311958] usb 3-3: USB disconnect, device number 9
[105167.815926] usb 3-3: new full-speed USB device number 10 using xhci_hcd
[105167.835737] usb 3-3: New USB device found, idVendor=056a, idProduct=00dd
[105167.835744] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[105167.835748] usb 3-3: Product: CTL-470
[105167.835751] usb 3-3: Manufacturer: Wacom Co.,Ltd.
[105168.227082] input: Wacom Bamboo Connect Pen as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/input/input12
[105168.229111] input: Wacom Bamboo Connect Finger as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/input/input13
[105168.229383] usbcore: registered new interface driver wacom
[124091.453150] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x00006100
[124091.453785] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[127320.404359] usb 3-3: USB disconnect, device number 10
[127320.404903] wacom 3-3:1.1: wacom_sys_irq - usb_submit_urb failed with result -19
[138697.643497] ath: phy0: Failed to stop TX DMA, queues=0x004!
[139094.163325] ath: phy0: Failed to stop TX DMA, queues=0x004!
[141328.906040] ath: phy0: Failed to stop TX DMA, queues=0x004!
[215991.890839] perf samples too long (5025 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
[247556.260040] usb 3-3: new high-speed USB device number 11 using xhci_hcd
[247556.277949] usb 3-3: New USB device found, idVendor=10d6, idProduct=1101
[247556.277953] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[247556.277955] usb 3-3: Product: HS USB FlashDisk
[247556.277957] usb 3-3: Manufacturer: ACTIONS
[247556.277959] usb 3-3: SerialNumber: \xffffffe3\xffffff89\xffffff95\xffffff89\xffffff95\xffffffe6\xffffff8d\xffffffa4\xffffff8d\xffffffa4\xffffffe7\xffffffa8\xffffffb0\xffffffa8\xffffffb0\xffffffe7\xffffff9c\xffffffb7\xffffff9c\xffffffb7\xffffffe3\xffffff95\xffffffb3\xffffff95\xffffffb3\xffffffe6\xffffff84\xffffffb3\xffffff84\xffffffb3\xffffffe3\xffffffa4\xffffffb7\xffffffa4\xffffffb7\xffffffe6\xffffffb9\xffffffb2\xffffffb9\xffffffb2
[247556.278221] usb-storage 3-3:1.0: USB Mass Storage device detected
[247556.278270] scsi14 : usb-storage 3-3:1.0
[247557.277601] scsi 14:0:0:0: Direct-Access     ACTIONS  HS USB FlashDisk 2.00 PQ: 0 ANSI: 0 CCS
[247557.277859] sd 14:0:0:0: Attached scsi generic sg4 type 0
[247557.278067] sd 14:0:0:0: [sdd] 3893112 1024-byte logical blocks: (3.98 GB/3.71 GiB)
[247557.278988] sd 14:0:0:0: [sdd] Write Protect is off
[247557.278993] sd 14:0:0:0: [sdd] Mode Sense: 00 c0 00 00
[247557.279380] sd 14:0:0:0: [sdd] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
[247557.280470] sd 14:0:0:0: [sdd] 3893112 1024-byte logical blocks: (3.98 GB/3.71 GiB)
[247557.281910]  sdd:
[247557.287173] sd 14:0:0:0: [sdd] 3893112 1024-byte logical blocks: (3.98 GB/3.71 GiB)
[247557.287958] sd 14:0:0:0: [sdd] Attached SCSI removable disk
[247574.493595] FAT-fs (sdd): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[248197.413757] usb 3-3: USB disconnect, device number 11
[/code]