Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- > FreeBSD EFI boot block
- Loader path: /boot/loader.efi
- Initializing modules: ZFS UFS
- Probing 4 block devices.....*. done
- ZFS found no pools
- UFS found 1 partition
- Consoles: EFI console
- MMC: block number 0x72c001 exceeds max(0x72c000)
- efipart_readwrite: rw=1, status=9223372036854775815
- MMC: block number 0x72c001 exceeds max(0x72c000)
- efipart_readwrite: rw=1, status=9223372036854775815
- Command line arguments: loader.efi
- Image base: 0xfcc56000
- EFI version: 2.05
- EFI Firmware: Das U-boot (rev 0.00)
- FreeBSD/arm64 EFI loader, Revision 1.1
- (Thu Mar 23 10:45:37 EDT 2017 dingo@host.optimcloud.com)
- EFI boot environment
- Loading /boot/defaults/loader.conf
- /boot/kernel/kernel data=0x84fa88+0x43b140 syms=[0x8+0x107700+0x8+0xbfff4]
- \
- Hit [Enter] to boot immediately, or any other key for command prompt.
- Type '?' for a list of commands, 'help' for more detailed help.
- OK boot -sv
- Booting...
- Using DTB provided by EFI at 0x88000000.
- KDB: debugger backends: ddb
- KDB: current backend: ddb
- Found 4 CPUs in the device tree
- Copyright (c) 1992-2017 The FreeBSD Project.
- Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
- The Regents of the University of California. All rights reserved.
- FreeBSD is a registered trademark of The FreeBSD Foundation.
- FreeBSD 12.0-CURRENT #0 1384f825a9b(master)-dirty: Thu Mar 23 10:45:14 EDT 2017
- dingo@host.optimcloud.com:/usr/home/dingo/crochet/work/obj/arm64.aarch64/usr/src/sys/GENERIC arm64
- FreeBSD clang version 4.0.0 (tags/RELEASE_400/final 297347) (based on LLVM 4.0.0)
- WARNING: WITNESS option enabled, expect reduced performance.
- VT: init without driver.
- Preloaded elf kernel "/boot/kernel/kernel" at 0xffff000000e58000.
- Starting CPU 1 (1)
- Failed to start CPU 1 (1)
- Starting CPU 2 (2)
- Failed to start CPU 2 (2)
- Starting CPU 3 (3)
- Failed to start CPU 3 (3)
- FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
- ULE: setup cpu 0
- random: entropy device external interface
- nfslock: pseudo-device
- null: <full device, null device, zero device>
- crypto: <crypto core>
- openfirm: <Open Firmware control device>
- kbd0 at kbdmux0
- mem: <memory>
- random: harvesting attach, 8 bytes (4 bits) from nexus0
- ofwbus0: <Open Firmware Device Tree>
- clk_fixed0: <Fixed clock> on ofwbus0
- random: harvesting attach, 8 bytes (4 bits) from clk_fixed0
- simplebus0: <Flattened device tree simple bus> on ofwbus0
- simplebus1: <Flattened device tree simple bus> mem 0x1530000-0x153ffff irq 10 on simplebus0
- random: harvesting attach, 8 bytes (4 bits) from simplebus1
- random: harvesting attach, 8 bytes (4 bits) from simplebus0
- random: harvesting attach, 8 bytes (4 bits) from ofwbus0
- gpio0: <Freescale QorIQ GPIO driver> mem 0x2300000-0x230ffff irq 25 on simplebus0
- gpiobus0: <GPIO bus> on gpio0
- random: harvesting attach, 8 bytes (4 bits) from gpiobus0
- random: harvesting attach, 8 bytes (4 bits) from gpio0
- gpio1: <Freescale QorIQ GPIO driver> mem 0x2310000-0x231ffff irq 26 on simplebus0
- gpiobus1: <GPIO bus> on gpio1
- random: harvesting attach, 8 bytes (4 bits) from gpiobus1
- random: harvesting attach, 8 bytes (4 bits) from gpio1
- gpio2: <Freescale QorIQ GPIO driver> mem 0x2320000-0x232ffff irq 27 on simplebus0
- gpiobus2: <GPIO bus> on gpio2
- random: harvesting attach, 8 bytes (4 bits) from gpiobus2
- random: harvesting attach, 8 bytes (4 bits) from gpio2
- gpio3: <Freescale QorIQ GPIO driver> mem 0x2330000-0x233ffff irq 28 on simplebus0
- gpiobus3: <GPIO bus> on gpio3
- random: harvesting attach, 8 bytes (4 bits) from gpiobus3
- random: harvesting attach, 8 bytes (4 bits) from gpio3
- gic0: <ARM Generic Interrupt Controller> mem 0x1401000-0x1401fff,0x1402000-0x1403fff,0x1404000-0x1405fff,0x1406000-0x1407fff irq 8 on ofwbus0
- gic0: pn 0x2, arch 0x2, rev 0x1, implementer 0x43b irqs 256
- random: harvesting attach, 8 bytes (4 bits) from gic0
- generic_timer0: <ARMv8 Generic Timer> irq 0,1,2,3 on ofwbus0
- Timecounter "ARM MPCore Timecounter" frequency 25000000 Hz quality 1000
- Event timer "ARM MPCore Eventtimer" frequency 25000000 Hz quality 1000
- random: harvesting attach, 8 bytes (4 bits) from generic_timer0
- cpulist0: <Open Firmware CPU Group> on ofwbus0
- cpu0: <Open Firmware CPU> on cpulist0
- cpu0: missing 'clock-frequency' property
- arm64_cpu0: register <0>
- random: harvesting attach, 8 bytes (4 bits) from arm64_cpu0
- random: harvesting attach, 8 bytes (4 bits) from cpu0
- cpu1: <Open Firmware CPU> on cpulist0
- cpu1: missing 'clock-frequency' property
- arm64_cpu1: register <1>
- random: harvesting attach, 8 bytes (4 bits) from arm64_cpu1
- random: harvesting attach, 8 bytes (4 bits) from cpu1
- cpu2: <Open Firmware CPU> on cpulist0
- cpu2: missing 'clock-frequency' property
- arm64_cpu2: register <2>
- random: harvesting attach, 8 bytes (4 bits) from arm64_cpu2
- random: harvesting attach, 8 bytes (4 bits) from cpu2
- cpu3: <Open Firmware CPU> on cpulist0
- cpu3: missing 'clock-frequency' property
- arm64_cpu3: register <3>
- random: harvesting attach, 8 bytes (4 bits) from arm64_cpu3
- random: harvesting attach, 8 bytes (4 bits) from cpu3
- random: harvesting attach, 8 bytes (4 bits) from cpulist0
- ofwbus0: <reboot> compat syscon-reboot (no driver attached)
- pmu0: <Performance Monitoring Unit> irq 4,5,6,7 on ofwbus0
- random: harvesting attach, 8 bytes (4 bits) from pmu0
- simplebus0: <clocking@1ee1000> mem 0x1ee1000-0x1ee1fff compat fsl,ls1043a-clockgen (no driver attached)
- simplebus0: <scfg@1570000> mem 0x1570000-0x157ffff compat fsl,ls1043a-scfg (no driver attached)
- simplebus0: <crypto@1700000> mem 0x1700000-0x17fffff irq 9 compat fsl,sec-v5.4 (no driver attached)
- simplebus0: <dcfg@1ee0000> mem 0x1ee0000-0x1eeffff compat fsl,ls1043a-dcfg (no driver attached)
- simplebus1: <nor@0,0> mem 0-0x7ffffff compat cfi-flash (no driver attached)
- simplebus1: <nand@1,0> mem 0x100000000-0x10000ffff compat fsl,ifc-nand (no driver attached)
- simplebus1: <board-control@2,0> mem 0x200000000-0x2000000ff compat fsl,ls1043ardb-cpld (no driver attached)
- simplebus0: <quadspi@1550000> mem 0x1550000-0x155ffff,0x40000000-0x43ffffff irq 11 disabled compat fsl,ls1043a-qspi (no driver attached)
- sdhci_fsl0: <Freescale eSDHC controller> mem 0x1560000-0x156ffff irq 12 on simplebus0
- sdhci_fsl0: Acquired clock: 8705815 from DTS
- sdhci_fsl0-slot0: 242MHz 8bits VDD: 3.3V VCCQ: 3.3V DRV: BACD PIO
- sdhci_fsl0-slot0: ============== REGISTER DUMP ==============
- sdhci_fsl0-slot0: Sys addr: 0x3066d1fa | Version: 0x00000221
- sdhci_fsl0-slot0: Blk size: 0x00000101 | Blk cnt: 0x00000002
- sdhci_fsl0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
- sdhci_fsl0-slot0: Present: 0x00800d07 | Host ctl: 0x00000000
- sdhci_fsl0-slot0: Power: 0x0000000d | Blk gap: 0x00000000
- sdhci_fsl0-slot0: Wake-up: 0x00000022 | Clock: 0x00000007
- sdhci_fsl0-slot0: Timeout: 0x00000001 | Int stat: 0x00000000
- sdhci_fsl0-slot0: Int enab: 0x01110033 | Sig enab: 0x01110033
- sdhci_fsl0-slot0: AC12 err: 0x00000000 | Host ctl2: 0x00000000
- sdhci_fsl0-slot0: Caps: 0x0104f237 | Caps2: 0x08000800
- sdhci_fsl0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
- sdhci_fsl0-slot0: ADMA addr: 0x00000000 | Slot int: 0x00000000
- sdhci_fsl0-slot0: ===========================================
- random: harvesting attach, 8 bytes (4 bits) from sdhci_fsl0
- simplebus0: <memory-controller@1080000> mem 0x1080000-0x1080fff irq 13 compat fsl,qoriq-memory-controller (no driver attached)
- simplebus0: <tmu@1f00000> mem 0x1f00000-0x1f0ffff irq 14 compat fsl,qoriq-tmu (no driver attached)
- simplebus0: <dspi@2100000> mem 0x2100000-0x210ffff irq 15 compat fsl,ls1043a-dspi (no driver attached)
- simplebus0: <dspi@2110000> mem 0x2110000-0x211ffff irq 16 disabled compat fsl,ls1043a-dspi (no driver attached)
- simplebus0: <i2c@2180000> mem 0x2180000-0x218ffff irq 17 compat fsl,vf610-i2c (no driver attached)
- simplebus0: <i2c@2190000> mem 0x2190000-0x219ffff irq 18 disabled compat fsl,vf610-i2c (no driver attached)
- simplebus0: <i2c@21a0000> mem 0x21a0000-0x21affff irq 19 disabled compat fsl,vf610-i2c (no driver attached)
- simplebus0: <i2c@21b0000> mem 0x21b0000-0x21bffff irq 20 disabled compat fsl,vf610-i2c (no driver attached)
- uart0: <16550 or compatible> mem 0x21c0500-0x21c05ff irq 21 on simplebus0
- uart0: console (115207,n,8,1)
- uart0: fast interrupt
- uart0: PPS capture mode: DCD
- random: harvesting attach, 8 bytes (4 bits) from uart0
- uart1: <16550 or compatible> mem 0x21c0600-0x21c06ff irq 22 on simplebus0
- uart1: fast interrupt
- uart1: PPS capture mode: DCD
- random: harvesting attach, 8 bytes (4 bits) from uart1
- uart2: <16550 or compatible> mem 0x21d0500-0x21d05ff irq 23 on simplebus0
- uart2: fast interrupt
- uart2: PPS capture mode: DCD
- random: harvesting attach, 8 bytes (4 bits) from uart2
- uart3: <16550 or compatible> mem 0x21d0600-0x21d06ff irq 24 on simplebus0
- uart3: fast interrupt
- uart3: PPS capture mode: DCD
- random: harvesting attach, 8 bytes (4 bits) from uart3
- gpioc0: <GPIO controller> on gpio0
- random: harvesting attach, 8 bytes (4 bits) from gpioc0
- gpioc1: <GPIO controller> on gpio1
- random: harvesting attach, 8 bytes (4 bits) from gpioc1
- gpioc2: <GPIO controller> on gpio2
- random: harvesting attach, 8 bytes (4 bits) from gpioc2
- gpioc3: <GPIO controller> on gpio3
- random: harvesting attach, 8 bytes (4 bits) from gpioc3
- simplebus0: <serial@2950000> mem 0x2950000-0x2950fff irq 29 disabled compat fsl,ls1021a-lpuart (no driver attached)
- simplebus0: <serial@2960000> mem 0x2960000-0x2960fff irq 30 disabled compat fsl,ls1021a-lpuart (no driver attached)
- simplebus0: <serial@2970000> mem 0x2970000-0x2970fff irq 31 disabled compat fsl,ls1021a-lpuart (no driver attached)
- simplebus0: <serial@2980000> mem 0x2980000-0x2980fff irq 32 disabled compat fsl,ls1021a-lpuart (no driver attached)
- simplebus0: <serial@2990000> mem 0x2990000-0x2990fff irq 33 disabled compat fsl,ls1021a-lpuart (no driver attached)
- simplebus0: <serial@29a0000> mem 0x29a0000-0x29a0fff irq 34 disabled compat fsl,ls1021a-lpuart (no driver attached)
- simplebus0: <wdog@2ad0000> mem 0x2ad0000-0x2adffff irq 35 compat fsl,ls1043a-wdt (no driver attached)
- simplebus0: <edma@2c00000> mem 0x2c00000-0x2c0ffff,0x2c10000-0x2c1ffff,0x2c20000-0x2c2ffff irq 36,37 compat fsl,vf610-edma (no driver attached)
- simplebus0: <usb3@2f00000> mem 0x2f00000-0x2f0ffff irq 38 compat snps,dwc3 (no driver attached)
- simplebus0: <usb3@3000000> mem 0x3000000-0x300ffff irq 39 compat snps,dwc3 (no driver attached)
- simplebus0: <usb3@3100000> mem 0x3100000-0x310ffff irq 40 compat snps,dwc3 (no driver attached)
- simplebus0: <sata@3200000> mem 0x3200000-0x320ffff irq 41 compat fsl,ls1043a-ahci (no driver attached)
- simplebus0: <msi-controller1@1571000> mem 0x1571000-0x1571007 irq 42 compat fsl,1s1043a-msi (no driver attached)
- simplebus0: <msi-controller2@1572000> mem 0x1572000-0x1572007 irq 43 compat fsl,1s1043a-msi (no driver attached)
- simplebus0: <msi-controller3@1573000> mem 0x1573000-0x1573007 irq 44 compat fsl,1s1043a-msi (no driver attached)
- simplebus0: <pcie@3400000> mem 0x3400000-0x34fffff,0x4000000000-0x4000001fff irq 45,46 type pci compat fsl,ls1043a-pcie (no driver attached)
- simplebus0: <pcie@3500000> mem 0x3500000-0x35fffff,0x4800000000-0x4800001fff irq 47,48 type pci compat fsl,ls1043a-pcie (no driver attached)
- simplebus0: <pcie@3600000> mem 0x3600000-0x36fffff,0x5000000000-0x5000001fff irq 49,50 type pci compat fsl,ls1043a-pcie (no driver attached)
- cryptosoft0: <software crypto>
- crypto: assign cryptosoft0 driver id 0, flags 100663296
- crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 25 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 24 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 26 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 27 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 28 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
- random: harvesting attach, 8 bytes (4 bits) from cryptosoft0
- Device configuration finished.
- procfs registered
- Timecounters tick every 1.000 msec
- vlan: initialized, using hash tables with chaining
- lo0: bpf attached
- tcp_init: net.inet.tcp.tcbhashsize auto tuned to 65536
- IPsec: Initialized Security Association Processing.
- usb_needs_explore_all: no devclass
- Release APs
- APs not started
- CPU 0: ARM Cortex-A53 r0p4 affinity: 0
- Instruction Set Attributes 0 = <AES+PMULL,SHA1,SHA2,CRC32>
- Instruction Set Attributes 1 = <0>
- Processor Features 0 = <AdvSIMD,Float,EL3 32,EL2 32,EL1 32,EL0 32>
- Processor Features 1 = <0>
- Memory Model Features 0 = <4k Granule,64k Granule,MixedEndian,S/NS Mem,16bit ASID,1TB PA>
- Memory Model Features 1 = <>
- Debug Features 0 = <2 CTX Breakpoints,4 Watchpoints,6 Breakpoints,PMUv3,Debug v8>
- Debug Features 1 = <0>
- Auxiliary Features 0 = <0>
- Auxiliary Features 1 = <0>
- WARNING: WITNESS option enabled, expect reduced performance.
- Loader variables:
- Manual root filesystem specification:
- <fstype>:<device> [options]
- Mount <device> using filesystem <fstype>
- and with the specified (optional) option list.
- eg. ufs:/dev/da0s1a
- zfs:tank
- cd9660:/dev/cd0 ro
- (which is equivalent to: mount -t cd9660 -o ro /dev/cd0 /)
- ? List valid disk boot devices
- . Yield 1 second (for background tasks)
- <empty line> Abort manual input
- mountroot>
- CTRL-A Z for help | 115200 8N1
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement