Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- NTR CFW 3.4 Preview Description
- IMPORTANT
- Preview Description
- IMPORTANT
- This version is an early stage of development preview version, only the new 3ds, do not support the old 3ds. In the official version will be released later
- In addition to the video transmission function, other features will support the old 3ds.
- Before using the video transmission function, carefully read the entire contents of the note.
- new features
- 1, CPU frequency settings are now automatically lock the frequency, start the game, pause, are not reset when the frequency is returned.
- 2, brightness adjustment function, can accurately adjust screen brightness. (If the menu is not displayed Backlight options
- Description This function is not supported by the current virtual systems, ensure that the virtual system 10.x and try again)
- 3, video transmission, video can be synchronized via Wifi to watch on PC. (Currently not transmit audio, if required
- Seeking recommended to connect through the headphone jack to the line-in port on your PC (if any) for the collection, or buy audio support
- USB sound card input)
- Known issues
- 1, after opening video transmission under certain circumstances within the game plug-in can not be loaded. If you need any plug-game (virtual language,
- Chinese, finger, etc.) is recommended to run the game and then pause open video transmission.
- 2, can not close the lid after opening video transmission standby, you can not run other games quit the game, the game needs to switch to restart.
- Video transmission instructions
- 1 erection Wifi hotspot
- Video transmission function Wifi signal quality more stringent requirements, follow a few suggestions to set up Wifi hotspot.
- 1, set up the router using Wifi hotspot. Not recommended to use USB wireless LAN set up hot spots. Even high-power USB
- Wireless card, during the video transfer performance may not be as ordinary Wifi router.
- 2, Wifi router must be connected through the network cable and or 5GHz Wifi and PC, and can not use the 2.4GHz Wifi and PC connected
- Connection. If the router is connected via Wifi 2.4GHz Wifi and PC, it may cause PC and router, 3DS and routing
- Data transmission between the conflicting seriously degrade performance.
- 3, router settings correct band to reduce interference. Wifi conflicting signals in the vicinity of the same frequency, usually as
- There are more Wifi hotspot near the location where the fruit, then the video transmission is a serious possibility of interference will be high. In the event of dry
- The case of interference, even if the 3DS from the router close to the quality of the video transmission will be relatively low. Recommendation taste in the router
- Try 1,6,11 three bands (2.4G Wifi interfere with each other in the band only three), and that cause the least disturbance.
- 4, check the video transmission quality. When the PC running the video receiving tool, NTRViewer will continue to output current Quality
- Data representing the current transmission quality. Quality at about 90% better, if Quality is often below 80%
- Try moving the 3DS in turn recommend to the router from the more recent places, increase the transmission power of the router, the router switch
- Band.
- Increase the transmission power of the router, the router switch
- Band.
- 5, Wifi hotspot or connect to the Internet need to consider using FakeProxy. . 3DS after connected to the Internet even Wifi checks
- Then, no Internet connection is automatically disconnected. If the 3DS connected to wireless hotspots without an Internet connection, you can set
- Proxy Server configuration settings FakeProxy way to solve (FakeProxy itself does not make 3DS networking). Start FakeProxy
- Directory START.bat, and configure the Windows Firewall to allow the PC to listen on port 3000, then the 3DS end Wifi
- Proxy settings set to the address of the PC, the port number is 3000. In the hot spot can not guarantee internet connection
- 3DS card is not automatically disconnected.
- 6, to avoid automatic upgrade. 3DS connected to Wifi in the case will automatically download the update package, you do not want to be easily upgraded if
- You can consider doing router shield upgrade or 3DS end arranged TubeHax DNS. In the router, then build the shield
- Yee shield at least the following domain names:
- nus.c.shop.nintendowifi.net
- ecs.c.shop.nintendowifi.net
- ccs.c.shop.nintendowifi.net
- nus.cdn.c.shop.nintendowifi.net
- (Ensure conntest.nintendowifi.net able to connect, otherwise it will be disconnected from the network 3DS).
- If the 3DS does not require network play, then you can consider using FakeProxy way.
- 2 connection
- 1, install .NET framework 4. https://www.microsoft.com/zh-cn/download/details.aspx?id=17718
- 2. Configure Windows Firewall or other protection software that allows listening on TCP port 3000 and UDP port 8001.
- If you are unsure how to do, consider disabling the firewall.
- 3, start.bat If you need FakeProxy, startup directory.
- 4, open NTRDebugger (ntrclient.exe) and NTRViewer.
- 5,3DS side installation BootNTR, copy ntr.bin (refer NTR CFW tutorial). Ensure 3DS virtual system
- At least version 10.x, otherwise incompatibilities occur.
- 6,3DS start NTR CFW, press X + Y pop-up menu to start the debugger (Enable Debugger).
- 7, NTRDebugger below the text box in the input connect ( '192.168.X.XXX', 8000) connected to the 3DS.
- 192.168.X.XXX for the 3DS's IP.
- 8, after a successful connection, enter remoteplay () to start video transmission, you can see NTRViewer appear in videos.
- 9, if the restart 3DS, began operating from the sixth step, without rebooting NTRDebugger or NTRViewer.
- Under normal circumstances, NTR Debugger output is as follows:
- Remark
- 1, some games will be automatically disconnected at runtime Wifi, you can enter the following command before running the game:
- write (0x0105AE4, (0x70, 0x47), pid = 0x1a)
- After using the patch, there will be a problem after the router is disconnected 3DS can not reconnect on.
- 2, NTRViewer.exe command line parameter supports switching layouts and scaling parameters are listed below
- -l 0 using the left and right layout
- -l 1 up and down layout
- -t 1.0 setup screen on the zoom factor
- -b 1.0 settings screen zoom factor
- E.g:
- NTRViewer.exe -l 1 -t 1.0 -b 0.5
- It can be achieved about the layout on the screen, the zoom factor of 1.0, the next screen zoom factor of 0.5.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement