API tools faq
paste
Guest User

Untitled

a guest
Jun 4th, 2012
184
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.04 KB | None | 0 0
raw download clone embed print report
  1. # smartctl --all /dev/sda
  2. smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen
  3. Home page is http://smartmontools.sourceforge.net/
  4.  
  5. === START OF INFORMATION SECTION ===
  6. Model Family: Seagate Barracuda 7200.11
  7. Device Model: ST31000340AS
  8. Serial Number: 9QJ0G2LP
  9. Firmware Version: SD15
  10. User Capacity: 1 000 204 886 016 bytes
  11. Device is: In smartctl database [for details use: -P show]
  12. ATA Version is: 8
  13. ATA Standard is: ATA-8-ACS revision 4
  14. Local Time is: Mon Jun 4 12:04:05 2012 MSD
  15. SMART support is: Available - device has SMART capability.
  16. SMART support is: Enabled
  17.  
  18. === START OF READ SMART DATA SECTION ===
  19. SMART overall-health self-assessment test result: PASSED
  20.  
  21. General SMART Values:
  22. Offline data collection status: (0x82) Offline data collection activity
  23. was completed without error.
  24. Auto Offline Data Collection: Enabled.
  25. Self-test execution status: ( 0) The previous self-test routine completed
  26. without error or no self-test has ever
  27. been run.
  28. Total time to complete Offline
  29. data collection: ( 634) seconds.
  30. Offline data collection
  31. capabilities: (0x7b) SMART execute Offline immediate.
  32. Auto Offline data collection on/off support.
  33. Suspend Offline collection upon new
  34. command.
  35. Offline surface scan supported.
  36. Self-test supported.
  37. Conveyance Self-test supported.
  38. Selective Self-test supported.
  39. SMART capabilities: (0x0003) Saves SMART data before entering
  40. power-saving mode.
  41. Supports SMART auto save timer.
  42. Error logging capability: (0x01) Error logging supported.
  43. General Purpose Logging supported.
  44. Short self-test routine
  45. recommended polling time: ( 1) minutes.
  46. Extended self-test routine
  47. recommended polling time: ( 222) minutes.
  48. Conveyance self-test routine
  49. recommended polling time: ( 2) minutes.
  50. SCT capabilities: (0x103b) SCT Status supported.
  51. SCT Feature Control supported.
  52. SCT Data Table supported.
  53.  
  54. SMART Attributes Data Structure revision number: 10
  55. Vendor Specific SMART Attributes with Thresholds:
  56. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  57. 1 Raw_Read_Error_Rate 0x000f 091 090 006 Pre-fail Always - 24097928
  58. 3 Spin_Up_Time 0x0003 091 089 000 Pre-fail Always - 0
  59. 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 209
  60. 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 706
  61. 7 Seek_Error_Rate 0x000f 066 057 030 Pre-fail Always - 266578322119
  62. 9 Power_On_Hours 0x0032 074 074 000 Old_age Always - 23146
  63. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 1
  64. 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 205
  65. 184 Unknown_Attribute 0x0032 100 100 099 Old_age Always - 0
  66. 187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 308
  67. 188 Unknown_Attribute 0x0032 100 099 000 Old_age Always - 4295032834
  68. 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
  69. 190 Airflow_Temperature_Cel 0x0022 071 060 045 Old_age Always - 29 (Lifetime Min/Max 17/37)
  70. 194 Temperature_Celsius 0x0022 029 040 000 Old_age Always - 29 (0 14 0 0)
  71. 195 Hardware_ECC_Recovered 0x001a 013 012 000 Old_age Always - 24097928
  72. 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 27
  73. 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 27
  74. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  75.  
  76. SMART Error Log Version: 1
  77. ATA Error Count: 308 (device log contains only the most recent five errors)
  78. CR = Command Register [HEX]
  79. FR = Features Register [HEX]
  80. SC = Sector Count Register [HEX]
  81. SN = Sector Number Register [HEX]
  82. CL = Cylinder Low Register [HEX]
  83. CH = Cylinder High Register [HEX]
  84. DH = Device/Head Register [HEX]
  85. DC = Device Command Register [HEX]
  86. ER = Error register [HEX]
  87. ST = Status register [HEX]
  88. Powered_Up_Time is measured from power on, and printed as
  89. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  90. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  91.  
  92. Error 308 occurred at disk power-on lifetime: 23143 hours (964 days + 7 hours)
  93. When the command that caused the error occurred, the device was active or idle.
  94.  
  95. After command completion occurred, registers were:
  96. ER ST SC SN CL CH DH
  97. -- -- -- -- -- -- --
  98. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  99.  
  100. Commands leading to the command that caused the error were:
  101. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  102. -- -- -- -- -- -- -- -- ---------------- --------------------
  103. 25 00 08 ff ff ff ef 00 33d+06:01:22.093 READ DMA EXT
  104. 27 00 00 00 00 00 e0 00 33d+06:01:21.993 READ NATIVE MAX ADDRESS EXT
  105. ec 00 00 00 00 00 a0 00 33d+06:01:21.966 IDENTIFY DEVICE
  106. ef 03 46 00 00 00 a0 00 33d+06:01:21.948 SET FEATURES [Set transfer mode]
  107. 27 00 00 00 00 00 e0 00 33d+06:01:21.930 READ NATIVE MAX ADDRESS EXT
  108.  
  109. Error 307 occurred at disk power-on lifetime: 23143 hours (964 days + 7 hours)
  110. When the command that caused the error occurred, the device was active or idle.
  111.  
  112. After command completion occurred, registers were:
  113. ER ST SC SN CL CH DH
  114. -- -- -- -- -- -- --
  115. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  116.  
  117. Commands leading to the command that caused the error were:
  118. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  119. -- -- -- -- -- -- -- -- ---------------- --------------------
  120. 25 00 08 ff ff ff ef 00 33d+06:01:18.977 READ DMA EXT
  121. 27 00 00 00 00 00 e0 00 33d+06:01:18.909 READ NATIVE MAX ADDRESS EXT
  122. ec 00 00 00 00 00 a0 00 33d+06:01:18.886 IDENTIFY DEVICE
  123. ef 03 46 00 00 00 a0 00 33d+06:01:18.875 SET FEATURES [Set transfer mode]
  124. 27 00 00 00 00 00 e0 00 33d+06:01:18.856 READ NATIVE MAX ADDRESS EXT
  125.  
  126. Error 306 occurred at disk power-on lifetime: 23143 hours (964 days + 7 hours)
  127. When the command that caused the error occurred, the device was active or idle.
  128.  
  129. After command completion occurred, registers were:
  130. ER ST SC SN CL CH DH
  131. -- -- -- -- -- -- --
  132. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  133.  
  134. Commands leading to the command that caused the error were:
  135. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  136. -- -- -- -- -- -- -- -- ---------------- --------------------
  137. 25 00 08 ff ff ff ef 00 33d+06:01:15.913 READ DMA EXT
  138. 27 00 00 00 00 00 e0 00 33d+06:01:15.846 READ NATIVE MAX ADDRESS EXT
  139. ec 00 00 00 00 00 a0 00 33d+06:01:15.826 IDENTIFY DEVICE
  140. ef 03 46 00 00 00 a0 00 33d+06:01:15.806 SET FEATURES [Set transfer mode]
  141. 27 00 00 00 00 00 e0 00 33d+06:01:15.783 READ NATIVE MAX ADDRESS EXT
  142.  
  143. Error 305 occurred at disk power-on lifetime: 23143 hours (964 days + 7 hours)
  144. When the command that caused the error occurred, the device was active or idle.
  145.  
  146. After command completion occurred, registers were:
  147. ER ST SC SN CL CH DH
  148. -- -- -- -- -- -- --
  149. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  150.  
  151. Commands leading to the command that caused the error were:
  152. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  153. -- -- -- -- -- -- -- -- ---------------- --------------------
  154. 25 00 08 ff ff ff ef 00 33d+06:01:12.820 READ DMA EXT
  155. 27 00 00 00 00 00 e0 00 33d+06:01:12.740 READ NATIVE MAX ADDRESS EXT
  156. ec 00 00 00 00 00 a0 00 33d+06:01:12.716 IDENTIFY DEVICE
  157. ef 03 46 00 00 00 a0 00 33d+06:01:12.703 SET FEATURES [Set transfer mode]
  158. 27 00 00 00 00 00 e0 00 33d+06:01:12.682 READ NATIVE MAX ADDRESS EXT
  159.  
  160. Error 304 occurred at disk power-on lifetime: 23143 hours (964 days + 7 hours)
  161. When the command that caused the error occurred, the device was active or idle.
  162.  
  163. After command completion occurred, registers were:
  164. ER ST SC SN CL CH DH
  165. -- -- -- -- -- -- --
  166. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  167.  
  168. Commands leading to the command that caused the error were:
  169. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  170. -- -- -- -- -- -- -- -- ---------------- --------------------
  171. 25 00 08 ff ff ff ef 00 33d+06:01:09.694 READ DMA EXT
  172. 27 00 00 00 00 00 e0 00 33d+06:01:09.618 READ NATIVE MAX ADDRESS EXT
  173. ec 00 00 00 00 00 a0 00 33d+06:01:09.605 IDENTIFY DEVICE
  174. ef 03 46 00 00 00 a0 00 33d+06:01:09.546 SET FEATURES [Set transfer mode]
  175. 27 00 00 00 00 00 e0 00 33d+06:01:09.327 READ NATIVE MAX ADDRESS EXT
  176.  
  177. SMART Self-test log structure revision number 1
  178. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  179.  
  180.  
  181. SMART Selective self-test log data structure revision number 1
  182. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  183. 1 0 0 Not_testing
  184. 2 0 0 Not_testing
  185. 3 0 0 Not_testing
  186. 4 0 0 Not_testing
  187. 5 0 0 Not_testing
  188. Selective self-test flags (0x0):
  189. After scanning selected spans, do NOT read-scan remainder of disk.
  190. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!