Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 2.6.32-41-generic (buildd@vernadsky) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5.1) ) #89-Ubuntu SMP Fri Apr 27 22:22:09 UTC 2012 (Ubuntu 2.6.32-41.89-generic 2.6.32.59+drm33.24)
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] Intel GenuineIntel
- [ 0.000000] AMD AuthenticAMD
- [ 0.000000] NSC Geode by NSC
- [ 0.000000] Cyrix CyrixInstead
- [ 0.000000] Centaur CentaurHauls
- [ 0.000000] Transmeta GenuineTMx86
- [ 0.000000] Transmeta TransmetaCPU
- [ 0.000000] UMC UMC UMC UMC
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
- [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
- [ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
- [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
- [ 0.000000] BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data)
- [ 0.000000] BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
- [ 0.000000] BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
- [ 0.000000] DMI 2.3 present.
- [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
- [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
- [ 0.000000] last_pfn = 0x3ffb0 max_arch_pfn = 0x100000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-EFFFF uncachable
- [ 0.000000] F0000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
- [ 0.000000] 1 disabled
- [ 0.000000] 2 disabled
- [ 0.000000] 3 disabled
- [ 0.000000] 4 disabled
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] Scanning 0 areas for low memory corruption
- [ 0.000000] modified physical RAM map:
- [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
- [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)
- [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
- [ 0.000000] modified: 00000000000e8000 - 0000000000100000 (reserved)
- [ 0.000000] modified: 0000000000100000 - 000000003ffb0000 (usable)
- [ 0.000000] modified: 000000003ffb0000 - 000000003ffc0000 (ACPI data)
- [ 0.000000] modified: 000000003ffc0000 - 000000003fff0000 (ACPI NVS)
- [ 0.000000] modified: 000000003fff0000 - 0000000040000000 (reserved)
- [ 0.000000] modified: 00000000ff7c0000 - 0000000100000000 (reserved)
- [ 0.000000] initial memory mapped : 0 - 00c00000
- [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
- [ 0.000000] Using x86 segment limits to approximate NX protection
- [ 0.000000] 0000000000 - 0000400000 page 4k
- [ 0.000000] 0000400000 - 0037400000 page 2M
- [ 0.000000] 0037400000 - 00377fe000 page 4k
- [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
- [ 0.000000] RAMDISK: 2f864000 - 30003fd9
- [ 0.000000] ACPI: RSDP 000f9b10 00014 (v00 ACPIAM)
- [ 0.000000] ACPI: RSDT 3ffb0000 00030 (v01 A M I OEMRSDT 03000620 MSFT 00000097)
- [ 0.000000] ACPI: FACP 3ffb0200 00081 (v01 A M I OEMFACP 03000620 MSFT 00000097)
- [ 0.000000] ACPI: DSDT 3ffb03f0 03F3A (v01 939A8 939A8202 00000202 INTL 02002026)
- [ 0.000000] ACPI: FACS 3ffc0000 00040
- [ 0.000000] ACPI: APIC 3ffb0390 0005C (v01 A M I OEMAPIC 03000620 MSFT 00000097)
- [ 0.000000] ACPI: OEMB 3ffc0040 00040 (v01 A M I AMI_OEM 03000620 MSFT 00000097)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] 135MB HIGHMEM available.
- [ 0.000000] 887MB LOWMEM available.
- [ 0.000000] mapped low ram: 0 - 377fe000
- [ 0.000000] low ram: 0 - 377fe000
- [ 0.000000] node 0 low ram: 00000000 - 377fe000
- [ 0.000000] node 0 bootmap 00011000 - 00017f00
- [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
- [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
- [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
- [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
- [ 0.000000] #3 [0000100000 - 00008e5f18] TEXT DATA BSS ==> [0000100000 - 00008e5f18]
- [ 0.000000] #4 [002f864000 - 0030003fd9] RAMDISK ==> [002f864000 - 0030003fd9]
- [ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
- [ 0.000000] #6 [00008e6000 - 00008e9099] BRK ==> [00008e6000 - 00008e9099]
- [ 0.000000] #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
- [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0x00000010 -> 0x00001000
- [ 0.000000] Normal 0x00001000 -> 0x000377fe
- [ 0.000000] HighMem 0x000377fe -> 0x0003ffb0
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[2] active PFN ranges
- [ 0.000000] 0: 0x00000010 -> 0x0000009f
- [ 0.000000] 0: 0x00000100 -> 0x0003ffb0
- [ 0.000000] On node 0 totalpages: 261951
- [ 0.000000] free_area_init_node: node 0, pgdat c07a0a20, node_mem_map c1001200
- [ 0.000000] DMA zone: 32 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 3951 pages, LIFO batch:0
- [ 0.000000] Normal zone: 1744 pages used for memmap
- [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
- [ 0.000000] HighMem zone: 272 pages used for memmap
- [ 0.000000] HighMem zone: 34466 pages, LIFO batch:7
- [ 0.000000] Using APIC driver default
- [ 0.000000] ACPI: PM-Timer IO Port: 0x808
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
- [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 24
- [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
- [ 0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
- [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bf7c0000)
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 14 pages/cpu @c1c00000 s36056 r0 d21288 u2097152
- [ 0.000000] pcpu-alloc: s36056 r0 d21288 u2097152 alloc=1*4194304
- [ 0.000000] pcpu-alloc: [0] 0 1
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259903
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-41-generic root=UUID=0eea23ff-c433-45e1-b9c7-7967c39c5c95 ro quiet splash
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Enabling fast FPU save and restore... done.
- [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
- [ 0.000000] Initializing CPU#0
- [ 0.000000] allocated 5240960 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] Initializing HighMem for node 0 (000377fe:0003ffb0)
- [ 0.000000] Memory: 1017004k/1048256k available (4698k kernel code, 30176k reserved, 2129k data, 664k init, 138952k highmem)
- [ 0.000000] virtual kernel memory layout:
- [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
- [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
- [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
- [ 0.000000] .init : 0xc07ab000 - 0xc0851000 ( 664 kB)
- [ 0.000000] .data : 0xc0596b07 - 0xc07aafc8 (2129 kB)
- [ 0.000000] .text : 0xc0100000 - 0xc0596b07 (4698 kB)
- [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
- [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:2304 nr_irqs:424
- [ 0.000000] spurious 8259A interrupt: IRQ7.
- [ 0.000000] Console: colour VGA+ 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] Fast TSC calibration using PIT
- [ 0.000000] Detected 1999.644 MHz processor.
- [ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3999.28 BogoMIPS (lpj=7998576)
- [ 0.004027] Security Framework initialized
- [ 0.004053] AppArmor: AppArmor initialized
- [ 0.004061] Mount-cache hash table entries: 512
- [ 0.004212] Initializing cgroup subsys ns
- [ 0.004216] Initializing cgroup subsys cpuacct
- [ 0.004221] Initializing cgroup subsys memory
- [ 0.004229] Initializing cgroup subsys devices
- [ 0.004232] Initializing cgroup subsys freezer
- [ 0.004234] Initializing cgroup subsys net_cls
- [ 0.004255] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
- [ 0.004258] CPU: L2 Cache: 512K (64 bytes/line)
- [ 0.004262] mce: CPU supports 5 MCE banks
- [ 0.004283] Performance Events: AMD PMU driver.
- [ 0.004290] ... version: 0
- [ 0.004292] ... bit width: 48
- [ 0.004294] ... generic registers: 4
- [ 0.004296] ... value mask: 0000ffffffffffff
- [ 0.004298] ... max period: 00007fffffffffff
- [ 0.004300] ... fixed-purpose events: 0
- [ 0.004302] ... event mask: 000000000000000f
- [ 0.004307] Checking 'hlt' instruction... OK.
- [ 0.020697] SMP alternatives: switching to UP code
- [ 0.026737] ACPI: Core revision 20090903
- [ 0.032265] ftrace: converting mcount calls to 0f 1f 44 00 00
- [ 0.032272] ftrace: allocating 21839 entries in 43 pages
- [ 0.036120] Enabling APIC mode: Flat. Using 1 I/O APICs
- [ 0.036866] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.078824] CPU0: AMD Athlon(tm) 64 Processor 3200+ stepping 00
- [ 0.080001] Brought up 1 CPUs
- [ 0.080001] Total of 1 processors activated (3999.28 BogoMIPS).
- [ 0.080001] CPU0 attaching NULL sched-domain.
- [ 0.080001] devtmpfs: initialized
- [ 0.080001] regulator: core version 0.5
- [ 0.080001] Time: 19:45:25 Date: 05/18/12
- [ 0.080001] NET: Registered protocol family 16
- [ 0.080001] EISA bus registered
- [ 0.080001] ACPI: bus type pci registered
- [ 0.080001] PCI: Using configuration type 1 for base access
- [ 0.080001] bio: create slab <bio-0> at 0
- [ 0.080001] ACPI: EC: Look up EC in DSDT
- [ 0.081706] ACPI: Executed 1 blocks of module-level executable AML code
- [ 0.085016] ACPI: Interpreter enabled
- [ 0.085019] ACPI: (supports S0 S1 S4 S5)
- [ 0.085039] ACPI: Using IOAPIC for interrupt routing
- [ 0.090336] ACPI Warning: Incorrect checksum in table [OEMB] - F0, should be E2 (20090903/tbutils-314)
- [ 0.090412] ACPI: No dock devices found.
- [ 0.090510] ACPI: PCI Root Bridge [PCI0] (0000:00)
- [ 0.090557] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xf0000000-0xf7ffffff]
- [ 0.090729] pci 0000:00:03.1: quirk: region 0800-083f claimed by ali7101 ACPI
- [ 0.090760] pci 0000:00:04.0: reg 10 io port: [0xe800-0xe8ff]
- [ 0.090766] pci 0000:00:04.0: reg 14 32bit mmio: [0xff6ff000-0xff6fffff]
- [ 0.090800] pci 0000:00:04.0: supports D1 D2
- [ 0.090803] pci 0000:00:04.0: PME# supported from D2 D3hot D3cold
- [ 0.090807] pci 0000:00:04.0: PME# disabled
- [ 0.090832] pci 0000:00:0d.0: reg 10 io port: [0xe400-0xe4ff]
- [ 0.090837] pci 0000:00:0d.0: reg 14 32bit mmio: [0xff6fec00-0xff6fecff]
- [ 0.090860] pci 0000:00:0d.0: PME# supported from D3hot D3cold
- [ 0.090863] pci 0000:00:0d.0: PME# disabled
- [ 0.090876] pci 0000:00:0e.0: reg 10 io port: [0x1f0-0x1ff]
- [ 0.090881] pci 0000:00:0e.0: reg 14 io port: [0x3f4-0x3f7]
- [ 0.090885] pci 0000:00:0e.0: reg 18 io port: [0x170-0x17f]
- [ 0.090890] pci 0000:00:0e.0: reg 1c io port: [0x374-0x377]
- [ 0.090894] pci 0000:00:0e.0: reg 20 io port: [0xff00-0xff0f]
- [ 0.090915] pci 0000:00:0f.0: reg 10 32bit mmio: [0xff6fd000-0xff6fdfff]
- [ 0.090942] pci 0000:00:0f.1: reg 10 32bit mmio: [0xff6fc000-0xff6fcfff]
- [ 0.090969] pci 0000:00:0f.2: reg 10 32bit mmio: [0xff6fb000-0xff6fbfff]
- [ 0.091003] pci 0000:00:0f.3: reg 10 32bit mmio: [0xff6fe800-0xff6fe8ff]
- [ 0.091032] pci 0000:00:0f.3: PME# supported from D0 D3hot D3cold
- [ 0.091035] pci 0000:00:0f.3: PME# disabled
- [ 0.091139] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xe0000000-0xe7ffffff]
- [ 0.091145] pci 0000:01:00.0: reg 14 io port: [0xc000-0xc0ff]
- [ 0.091150] pci 0000:01:00.0: reg 18 32bit mmio: [0xff4f0000-0xff4fffff]
- [ 0.091163] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xff4c0000-0xff4dffff]
- [ 0.091186] pci 0000:01:00.0: supports D1 D2
- [ 0.091207] pci 0000:01:00.1: reg 10 32bit mmio pref: [0xd8000000-0xdfffffff]
- [ 0.091213] pci 0000:01:00.1: reg 14 32bit mmio: [0xff4e0000-0xff4effff]
- [ 0.091242] pci 0000:01:00.1: supports D1 D2
- [ 0.091273] pci 0000:00:01.0: bridge io port: [0xa000-0xcfff]
- [ 0.091276] pci 0000:00:01.0: bridge 32bit mmio: [0xff400000-0xff4fffff]
- [ 0.091281] pci 0000:00:01.0: bridge 32bit mmio pref: [0xceb00000-0xeeafffff]
- [ 0.091311] pci 0000:02:06.0: reg 10 io port: [0xdc00-0xdc7f]
- [ 0.091317] pci 0000:02:06.0: reg 14 32bit mmio: [0xff5ffc00-0xff5ffc7f]
- [ 0.091334] pci 0000:02:06.0: reg 30 32bit mmio pref: [0xfffc0000-0xffffffff]
- [ 0.091353] pci 0000:02:06.0: PME# supported from D3hot D3cold
- [ 0.091357] pci 0000:02:06.0: PME# disabled
- [ 0.091380] pci 0000:02:07.0: reg 10 32bit mmio: [0xff5fe000-0xff5fefff]
- [ 0.091416] pci 0000:02:07.0: supports D1 D2
- [ 0.091419] pci 0000:02:07.0: PME# supported from D0 D1 D2 D3hot
- [ 0.091422] pci 0000:02:07.0: PME# disabled
- [ 0.091446] pci 0000:02:07.1: reg 10 32bit mmio: [0xff5fd000-0xff5fdfff]
- [ 0.091482] pci 0000:02:07.1: supports D1 D2
- [ 0.091484] pci 0000:02:07.1: PME# supported from D0 D1 D2 D3hot
- [ 0.091488] pci 0000:02:07.1: PME# disabled
- [ 0.091511] pci 0000:02:07.2: reg 10 32bit mmio: [0xff5ff800-0xff5ff8ff]
- [ 0.091547] pci 0000:02:07.2: supports D1 D2
- [ 0.091549] pci 0000:02:07.2: PME# supported from D0 D1 D2 D3hot
- [ 0.091553] pci 0000:02:07.2: PME# disabled
- [ 0.091581] pci 0000:00:02.0: transparent bridge
- [ 0.091585] pci 0000:00:02.0: bridge io port: [0xd000-0xdfff]
- [ 0.091589] pci 0000:00:02.0: bridge 32bit mmio: [0xff500000-0xff5fffff]
- [ 0.091600] pci_bus 0000:00: on NUMA node 0
- [ 0.091604] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 0.091667] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
- [ 0.091704] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HTT_._PRT]
- [ 0.098781] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
- [ 0.098930] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
- [ 0.099078] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
- [ 0.099225] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
- [ 0.099372] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
- [ 0.099519] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
- [ 0.099667] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
- [ 0.099815] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
- [ 0.099961] ACPI: PCI Interrupt Link [LNKP] (IRQs 3 4 *5 6 7 10 11 12 14 15)
- [ 0.100072] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.100077] vgaarb: loaded
- [ 0.100197] SCSI subsystem initialized
- [ 0.100273] libata version 3.00 loaded.
- [ 0.100345] usbcore: registered new interface driver usbfs
- [ 0.100358] usbcore: registered new interface driver hub
- [ 0.100382] usbcore: registered new device driver usb
- [ 0.100512] ACPI: WMI: Mapper loaded
- [ 0.100514] PCI: Using ACPI for IRQ routing
- [ 0.100656] NetLabel: Initializing
- [ 0.100658] NetLabel: domain hash size = 128
- [ 0.100660] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.100673] NetLabel: unlabeled traffic allowed by default
- [ 0.102550] AppArmor: AppArmor Filesystem Enabled
- [ 0.102572] pnp: PnP ACPI init
- [ 0.102593] ACPI: bus type pnp registered
- [ 0.106253] pnp: PnP ACPI: found 13 devices
- [ 0.106256] ACPI: ACPI bus type pnp unregistered
- [ 0.106260] PnPBIOS: Disabled by ACPI PNP
- [ 0.106275] system 00:08: ioport range 0x400-0x40f has been reserved
- [ 0.106279] system 00:08: ioport range 0x480-0x48f has been reserved
- [ 0.106282] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
- [ 0.106285] system 00:08: ioport range 0x800-0x87f could not be reserved
- [ 0.106290] system 00:08: iomem range 0xfff80000-0xffffffff has been reserved
- [ 0.106296] system 00:09: iomem range 0xffbc0000-0xffbfffff has been reserved
- [ 0.106299] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
- [ 0.106303] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
- [ 0.106309] system 00:0b: ioport range 0x680-0x6ff has been reserved
- [ 0.106312] system 00:0b: ioport range 0x295-0x296 has been reserved
- [ 0.106318] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
- [ 0.106321] system 00:0c: iomem range 0xc0000-0xdffff could not be reserved
- [ 0.106325] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
- [ 0.106328] system 00:0c: iomem range 0x100000-0x3fffffff could not be reserved
- [ 0.140994] Switching to clocksource acpi_pm
- [ 0.141111] pci 0000:02:06.0: BAR 6: address space collision on of device [0xfffc0000-0xffffffff]
- [ 0.141128] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
- [ 0.141131] pci 0000:00:01.0: IO window: 0xa000-0xcfff
- [ 0.141136] pci 0000:00:01.0: MEM window: 0xff400000-0xff4fffff
- [ 0.141141] pci 0000:00:01.0: PREFETCH window: 0xceb00000-0xeeafffff
- [ 0.141147] pci 0000:00:02.0: PCI bridge, secondary bus 0000:02
- [ 0.141151] pci 0000:00:02.0: IO window: 0xd000-0xdfff
- [ 0.141155] pci 0000:00:02.0: MEM window: 0xff500000-0xff5fffff
- [ 0.141160] pci 0000:00:02.0: PREFETCH window: 0x40000000-0x400fffff
- [ 0.141173] pci 0000:00:01.0: setting latency timer to 64
- [ 0.141178] pci 0000:00:02.0: setting latency timer to 64
- [ 0.141183] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
- [ 0.141186] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
- [ 0.141189] pci_bus 0000:01: resource 0 io: [0xa000-0xcfff]
- [ 0.141192] pci_bus 0000:01: resource 1 mem: [0xff400000-0xff4fffff]
- [ 0.141195] pci_bus 0000:01: resource 2 pref mem [0xceb00000-0xeeafffff]
- [ 0.141198] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff]
- [ 0.141201] pci_bus 0000:02: resource 1 mem: [0xff500000-0xff5fffff]
- [ 0.141203] pci_bus 0000:02: resource 2 pref mem [0x40000000-0x400fffff]
- [ 0.141206] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
- [ 0.141209] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
- [ 0.141250] NET: Registered protocol family 2
- [ 0.141350] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.141725] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.142615] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.143092] TCP: Hash tables configured (established 131072 bind 65536)
- [ 0.143095] TCP reno registered
- [ 0.143206] NET: Registered protocol family 1
- [ 0.143266] alloc irq_desc for 20 on node -1
- [ 0.143269] alloc kstat_irqs on node -1
- [ 0.143279] pci 0000:00:0f.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
- [ 0.160023] pci 0000:00:0f.0: PCI INT A disabled
- [ 0.160030] alloc irq_desc for 21 on node -1
- [ 0.160032] alloc kstat_irqs on node -1
- [ 0.160036] pci 0000:00:0f.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
- [ 0.176012] pci 0000:00:0f.1: PCI INT B disabled
- [ 0.176018] alloc irq_desc for 22 on node -1
- [ 0.176020] alloc kstat_irqs on node -1
- [ 0.176024] pci 0000:00:0f.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
- [ 0.192015] pci 0000:00:0f.2: PCI INT C disabled
- [ 0.192027] alloc irq_desc for 23 on node -1
- [ 0.192028] alloc kstat_irqs on node -1
- [ 0.192032] pci 0000:00:0f.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
- [ 0.192041] pci 0000:00:0f.3: PCI INT D disabled
- [ 0.192051] pci 0000:01:00.0: Boot video device
- [ 0.192064] alloc irq_desc for 19 on node -1
- [ 0.192066] alloc kstat_irqs on node -1
- [ 0.192069] pci 0000:02:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
- [ 0.192081] pci 0000:02:07.0: PCI INT A disabled
- [ 0.192089] pci 0000:02:07.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
- [ 0.192097] pci 0000:02:07.1: PCI INT B disabled
- [ 0.192105] pci 0000:02:07.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
- [ 0.192115] pci 0000:02:07.2: PCI INT C disabled
- [ 0.192322] cpufreq-nforce2: No nForce2 chipset.
- [ 0.192350] Scanning for low memory corruption every 60 seconds
- [ 0.192457] audit: initializing netlink socket (disabled)
- [ 0.192469] type=2000 audit(1337370325.192:1): initialized
- [ 0.202636] Trying to unpack rootfs image as initramfs...
- [ 0.216432] highmem bounce pool size: 64 pages
- [ 0.216439] HugeTLB registered 4 MB page size, pre-allocated 0 pages
- [ 0.217986] VFS: Disk quotas dquot_6.5.2
- [ 0.218052] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.218638] fuse init (API version 7.13)
- [ 0.218724] msgmni has been set to 1716
- [ 0.224187] alg: No test for stdrng (krng)
- [ 0.224289] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 0.224292] io scheduler noop registered
- [ 0.224294] io scheduler anticipatory registered
- [ 0.224296] io scheduler deadline registered
- [ 0.224336] io scheduler cfq registered (default)
- [ 0.224459] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 0.224481] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
- [ 0.224587] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
- [ 0.224592] ACPI: Power Button [PWRB]
- [ 0.224640] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
- [ 0.224643] ACPI: Power Button [PWRF]
- [ 0.224863] processor LNXCPU:00: registered as cooling_device0
- [ 0.228557] isapnp: Scanning for PnP cards...
- [ 0.234230] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.234322] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 0.234632] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 0.235641] brd: module loaded
- [ 0.240462] loop: module loaded
- [ 0.240581] input: Macintosh mouse button emulation as /devices/virtual/input/input2
- [ 0.240757] pata_acpi 0000:00:0e.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
- [ 0.240812] pata_acpi 0000:00:0e.0: PCI INT A disabled
- [ 0.241115] Fixed MDIO Bus: probed
- [ 0.241150] PPP generic driver version 2.4.2
- [ 0.241188] tun: Universal TUN/TAP device driver, 1.6
- [ 0.241190] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 0.241269] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.241282] ehci_hcd 0000:00:0f.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
- [ 0.241301] ehci_hcd 0000:00:0f.3: EHCI Host Controller
- [ 0.241335] ehci_hcd 0000:00:0f.3: new USB bus registered, assigned bus number 1
- [ 0.241360] ehci_hcd 0000:00:0f.3: debug port 1
- [ 0.287685] ehci_hcd 0000:00:0f.3: irq 23, io mem 0xff6fe800
- [ 0.296382] ehci_hcd 0000:00:0f.3: USB 2.0 started, EHCI 1.00
- [ 0.296527] usb usb1: configuration #1 chosen from 1 choice
- [ 0.296558] hub 1-0:1.0: USB hub found
- [ 0.296570] hub 1-0:1.0: 8 ports detected
- [ 0.296646] ehci_hcd 0000:02:07.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
- [ 0.296669] ehci_hcd 0000:02:07.2: EHCI Host Controller
- [ 0.296710] ehci_hcd 0000:02:07.2: new USB bus registered, assigned bus number 2
- [ 0.320427] ehci_hcd 0000:02:07.2: irq 21, io mem 0xff5ff800
- [ 0.332081] ehci_hcd 0000:02:07.2: USB 2.0 started, EHCI 1.00
- [ 0.332225] usb usb2: configuration #1 chosen from 1 choice
- [ 0.332258] hub 2-0:1.0: USB hub found
- [ 0.332270] hub 2-0:1.0: 5 ports detected
- [ 0.332352] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.332379] ohci_hcd 0000:00:0f.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
- [ 0.332401] ohci_hcd 0000:00:0f.0: OHCI Host Controller
- [ 0.332439] ohci_hcd 0000:00:0f.0: new USB bus registered, assigned bus number 3
- [ 0.332478] ohci_hcd 0000:00:0f.0: irq 20, io mem 0xff6fd000
- [ 0.390370] usb usb3: configuration #1 chosen from 1 choice
- [ 0.390403] hub 3-0:1.0: USB hub found
- [ 0.390417] hub 3-0:1.0: 3 ports detected
- [ 0.390478] ohci_hcd 0000:00:0f.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
- [ 0.390502] ohci_hcd 0000:00:0f.1: OHCI Host Controller
- [ 0.390544] ohci_hcd 0000:00:0f.1: new USB bus registered, assigned bus number 4
- [ 0.390564] ohci_hcd 0000:00:0f.1: irq 21, io mem 0xff6fc000
- [ 0.465921] usb usb4: configuration #1 chosen from 1 choice
- [ 0.465955] hub 4-0:1.0: USB hub found
- [ 0.465968] hub 4-0:1.0: 3 ports detected
- [ 0.466028] ohci_hcd 0000:00:0f.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
- [ 0.466052] ohci_hcd 0000:00:0f.2: OHCI Host Controller
- [ 0.466095] ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 5
- [ 0.466136] ohci_hcd 0000:00:0f.2: irq 22, io mem 0xff6fb000
- [ 0.557762] usb usb5: configuration #1 chosen from 1 choice
- [ 0.557800] hub 5-0:1.0: USB hub found
- [ 0.557813] hub 5-0:1.0: 3 ports detected
- [ 0.557871] ohci_hcd 0000:02:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
- [ 0.557895] ohci_hcd 0000:02:07.0: OHCI Host Controller
- [ 0.557936] ohci_hcd 0000:02:07.0: new USB bus registered, assigned bus number 6
- [ 0.557977] ohci_hcd 0000:02:07.0: irq 19, io mem 0xff5fe000
- [ 0.673367] usb 1-2: new high speed USB device using ehci_hcd and address 2
- [ 0.694890] Freeing initrd memory: 7807k freed
- [ 0.701822] usb usb6: configuration #1 chosen from 1 choice
- [ 0.701862] hub 6-0:1.0: USB hub found
- [ 0.701877] hub 6-0:1.0: 3 ports detected
- [ 0.701937] ohci_hcd 0000:02:07.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
- [ 0.701962] ohci_hcd 0000:02:07.1: OHCI Host Controller
- [ 0.702005] ohci_hcd 0000:02:07.1: new USB bus registered, assigned bus number 7
- [ 0.702029] ohci_hcd 0000:02:07.1: irq 20, io mem 0xff5fd000
- [ 0.818836] usb usb7: configuration #1 chosen from 1 choice
- [ 0.818861] hub 7-0:1.0: USB hub found
- [ 0.818871] hub 7-0:1.0: 2 ports detected
- [ 0.818923] uhci_hcd: USB Universal Host Controller Interface driver
- [ 0.819031] PNP: No PS/2 controller found. Probing ports directly.
- [ 0.864371] isapnp: No Plug & Play device found
- [ 0.865378] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 0.865384] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 0.865493] mice: PS/2 mouse device common for all mice
- [ 0.865591] rtc_cmos 00:02: RTC can wake from S4
- [ 0.865645] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
- [ 0.865674] rtc0: alarms up to one month, 114 bytes nvram
- [ 0.865784] device-mapper: uevent: version 1.0.3
- [ 0.865993] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
- [ 0.866045] device-mapper: multipath: version 1.1.0 loaded
- [ 0.866049] device-mapper: multipath round-robin: version 1.0.0 loaded
- [ 0.866163] EISA: Probing bus 0 at eisa.0
- [ 0.866195] EISA: Detected 0 cards.
- [ 0.866243] cpuidle: using governor ladder
- [ 0.866245] cpuidle: using governor menu
- [ 0.866646] TCP cubic registered
- [ 0.866808] NET: Registered protocol family 10
- [ 0.867647] NET: Registered protocol family 17
- [ 0.867676] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (1 cpu cores) (version 2.20.00)
- [ 0.867757] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x6
- [ 0.867760] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x8
- [ 0.867762] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0xa
- [ 0.867802] Using IPI No-Shortcut mode
- [ 0.867884] PM: Resume from disk failed.
- [ 0.867904] registered taskstats version 1
- [ 0.868147] Magic number: 12:597:799
- [ 0.868243] rtc_cmos 00:02: setting system clock to 2012-05-18 19:45:26 UTC (1337370326)
- [ 0.868246] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
- [ 0.868248] EDD information not available.
- [ 0.868319] Freeing unused kernel memory: 664k freed
- [ 0.868858] Write protecting the kernel text: 4700k
- [ 0.868889] Write protecting the kernel read-only data: 1848k
- [ 0.882977] usb 1-2: configuration #1 chosen from 1 choice
- [ 0.889636] udev: starting version 151
- [ 1.073048] pata_ali 0000:00:0e.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
- [ 1.082121] dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
- [ 1.082165] alloc irq_desc for 18 on node -1
- [ 1.082168] alloc kstat_irqs on node -1
- [ 1.082177] dmfe 0000:02:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- [ 1.107313] scsi0 : pata_ali
- [ 1.108057] usb 2-2: new high speed USB device using ehci_hcd and address 2
- [ 1.126842] scsi1 : pata_ali
- [ 1.128818] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
- [ 1.128821] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
- [ 1.130085] Initializing USB Mass Storage driver...
- [ 1.130240] scsi2 : SCSI emulation for USB Mass Storage devices
- [ 1.130536] usb-storage: device found at 2
- [ 1.130538] usb-storage: waiting for device to settle before scanning
- [ 1.130560] scsi3 : SCSI emulation for USB Mass Storage devices
- [ 1.130667] usbcore: registered new interface driver usb-storage
- [ 1.130669] USB Mass Storage support registered.
- [ 1.130744] usb-storage: device found at 2
- [ 1.130746] usb-storage: waiting for device to settle before scanning
- [ 1.131414] eth0: Davicom DM9102 at pci0000:02:06.0, 00:00:ab:91:1a:00, irq 18.
- [ 1.133265] FDC 0 is a post-1991 82077
- [ 1.364133] ata1.00: ATA-7: MAXTOR STM3802110A, 3.AAK, max UDMA/100
- [ 1.364136] ata1.00: 156301488 sectors, multi 16: LBA48
- [ 1.364168] ata1.01: ATA-7: Maxtor 2F040L0, VAM51JJ0, max UDMA/133
- [ 1.364171] ata1.01: 39102336 sectors, multi 16: LBA
- [ 1.389204] usb 2-2: configuration #1 chosen from 1 choice
- [ 1.391015] scsi4 : SCSI emulation for USB Mass Storage devices
- [ 1.391325] usb-storage: device found at 2
- [ 1.391327] usb-storage: waiting for device to settle before scanning
- [ 1.433553] ata1.00: configured for UDMA/100
- [ 1.448159] ata1.01: configured for UDMA/133
- [ 1.448285] scsi 0:0:0:0: Direct-Access ATA MAXTOR STM380211 3.AA PQ: 0 ANSI: 5
- [ 1.448433] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 1.448685] scsi 0:0:1:0: Direct-Access ATA Maxtor 2F040L0 VAM5 PQ: 0 ANSI: 5
- [ 1.448791] sd 0:0:1:0: Attached scsi generic sg1 type 0
- [ 1.449059] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
- [ 1.449102] sd 0:0:0:0: [sda] Write Protect is off
- [ 1.449105] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 1.449128] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.449261] sda: sda1 sda2 < sda5 >
- [ 1.497178] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 1.497196] sd 0:0:1:0: [sdb] 39102336 512-byte logical blocks: (20.0 GB/18.6 GiB)
- [ 1.497233] sd 0:0:1:0: [sdb] Write Protect is off
- [ 1.497236] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
- [ 1.497256] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.497365] sdb:
- [ 1.500025] usb 2-3: new high speed USB device using ehci_hcd and address 3
- [ 1.509100] sdb1 sdb2 < sdb5 >
- [ 1.525358] sd 0:0:1:0: [sdb] Attached SCSI disk
- [ 1.620437] ata2.00: ATA-7: Maxtor 6Y060L0, YAR41VW0, max UDMA/133
- [ 1.620440] ata2.00: 120103200 sectors, multi 16: LBA
- [ 1.620472] ata2.01: ATAPI: HL-DT-STDVD-RAM GH22NP20, 2.00, max UDMA/66
- [ 1.620494] ata2.01: WARNING: ATAPI DMA disabled for reliability issues. It can be enabled
- [ 1.620496] ata2.01: WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node.
- [ 1.636316] ata2.00: configured for UDMA/133
- [ 1.649021] usb 2-3: configuration #1 chosen from 1 choice
- [ 1.650908] scsi5 : SCSI emulation for USB Mass Storage devices
- [ 1.651209] usb-storage: device found at 3
- [ 1.651212] usb-storage: waiting for device to settle before scanning
- [ 1.652259] ata2.01: configured for UDMA/66
- [ 1.653321] scsi 1:0:0:0: Direct-Access ATA Maxtor 6Y060L0 YAR4 PQ: 0 ANSI: 5
- [ 1.653498] sd 1:0:0:0: [sdc] 120103200 512-byte logical blocks: (61.4 GB/57.2 GiB)
- [ 1.653540] sd 1:0:0:0: [sdc] Write Protect is off
- [ 1.653543] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00
- [ 1.653566] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.653752] sd 1:0:0:0: Attached scsi generic sg2 type 0
- [ 1.654345] sdc: sdc1
- [ 1.678445] scsi 1:0:1:0: CD-ROM HL-DT-ST DVD-RAM GH22NP20 2.00 PQ: 0 ANSI: 5
- [ 1.679391] sd 1:0:0:0: [sdc] Attached SCSI disk
- [ 1.681915] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 1.681918] Uniform CD-ROM driver Revision: 3.20
- [ 1.682132] sr 1:0:1:0: Attached scsi CD-ROM sr0
- [ 1.682243] sr 1:0:1:0: Attached scsi generic sg3 type 5
- [ 1.952028] usb 4-2: new low speed USB device using ohci_hcd and address 2
- [ 2.166978] usb 4-2: configuration #1 chosen from 1 choice
- [ 2.182140] usbcore: registered new interface driver hiddev
- [ 2.189182] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:0f.1/usb4/4-2/4-2:1.0/input/input3
- [ 2.189494] generic-usb 0003:046D:C315.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:0f.1-2/input0
- [ 2.189531] usbcore: registered new interface driver usbhid
- [ 2.189641] usbhid: v2.6:USB HID core driver
- [ 2.380134] EXT4-fs (sdb1): INFO: recovery required on readonly filesystem
- [ 2.380141] EXT4-fs (sdb1): write access will be enabled during recovery
- [ 2.472018] usb 5-2: new low speed USB device using ohci_hcd and address 2
- [ 2.673271] EXT4-fs (sdb1): orphan cleanup on readonly fs
- [ 2.673281] EXT4-fs (sdb1): ext4_orphan_cleanup: deleting unreferenced inode 654768
- [ 2.673375] EXT4-fs (sdb1): ext4_orphan_cleanup: deleting unreferenced inode 654767
- [ 2.673390] EXT4-fs (sdb1): 2 orphan inodes deleted
- [ 2.673393] EXT4-fs (sdb1): recovery complete
- [ 2.684829] usb 5-2: configuration #1 chosen from 1 choice
- [ 2.698000] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:0f.2/usb5/5-2/5-2:1.0/input/input4
- [ 2.698105] generic-usb 0003:093A:2510.0002: input,hidraw1: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:0f.2-2/input0
- [ 3.328283] EXT4-fs (sdb1): mounted filesystem with ordered data mode
- [ 6.129346] usb-storage: device scan complete
- [ 6.129802] usb-storage: device scan complete
- [ 6.130067] scsi 2:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
- [ 6.130927] scsi 3:0:0:0: Direct-Access HUAWEI TF CARD Storage PQ: 0 ANSI: 2
- [ 6.133413] sr1: scsi-1 drive
- [ 6.133543] sr 2:0:0:0: Attached scsi CD-ROM sr1
- [ 6.133615] sr 2:0:0:0: Attached scsi generic sg4 type 5
- [ 6.133787] sd 3:0:0:0: Attached scsi generic sg5 type 0
- [ 6.135788] sd 3:0:0:0: [sdd] Attached SCSI removable disk
- [ 6.388285] usb-storage: device scan complete
- [ 6.388759] scsi 4:0:0:0: Direct-Access Generic USB SD Reader 0.00 PQ: 0 ANSI: 2
- [ 6.389240] scsi 4:0:0:1: Direct-Access Generic Mini SD Reader 0.00 PQ: 0 ANSI: 2
- [ 6.389652] sd 4:0:0:0: Attached scsi generic sg6 type 0
- [ 6.389809] sd 4:0:0:1: Attached scsi generic sg7 type 0
- [ 6.391483] sd 4:0:0:0: [sde] Attached SCSI removable disk
- [ 6.392104] sd 4:0:0:1: [sdf] Attached SCSI removable disk
- [ 6.648229] usb-storage: device scan complete
- [ 6.648704] scsi 5:0:0:0: Direct-Access TOSHIBA MK3259GSX PQ: 0 ANSI: 2 CCS
- [ 6.649114] sd 5:0:0:0: Attached scsi generic sg8 type 0
- [ 6.649682] sd 5:0:0:0: [sdg] 625142448 512-byte logical blocks: (320 GB/298 GiB)
- [ 6.650429] sd 5:0:0:0: [sdg] Write Protect is off
- [ 6.650432] sd 5:0:0:0: [sdg] Mode Sense: 28 00 00 00
- [ 6.650435] sd 5:0:0:0: [sdg] Assuming drive cache: write through
- [ 6.651803] sd 5:0:0:0: [sdg] Assuming drive cache: write through
- [ 6.651806] sdg: sdg1
- [ 7.001485] sd 5:0:0:0: [sdg] Assuming drive cache: write through
- [ 7.001489] sd 5:0:0:0: [sdg] Attached SCSI disk
- [ 16.512819] Adding 859128k swap on /dev/sdb5. Priority:-1 extents:1 across:859128k
- [ 16.531510] udev: starting version 151
- [ 16.664196] lp: driver loaded but no devices found
- [ 16.758998] ali1563_smbus 0000:00:03.0: Found ALi1563 SMBus at 0x0400
- [ 16.761713] ali1535_smbus 0000:00:03.1: ALI1535_smb region uninitialized - upgrade BIOS?
- [ 16.761717] ali1535_smbus 0000:00:03.1: ALI1535 not detected, module not inserted.
- [ 16.762415] ali15x3_smbus 0000:00:03.1: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr
- [ 16.762475] ali15x3_smbus 0000:00:03.1: ALI15X3 not detected, module not inserted.
- [ 16.763274] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
- [ 16.763319] alloc irq_desc for 17 on node -1
- [ 16.763322] alloc kstat_irqs on node -1
- [ 16.763330] uli526x 0000:00:0d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- [ 16.785727] Linux agpgart interface v0.103
- [ 17.098590] usbcore: registered new interface driver usbserial
- [ 17.098605] USB Serial support registered for generic
- [ 17.098651] usbcore: registered new interface driver usbserial_generic
- [ 17.098654] usbserial: USB Serial Driver core
- [ 17.109608] USB Serial support registered for GSM modem (1-port)
- [ 17.109683] option 1-2:1.0: GSM modem (1-port) converter detected
- [ 17.109818] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB0
- [ 17.109833] option 1-2:1.1: GSM modem (1-port) converter detected
- [ 17.109889] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB1
- [ 17.109903] option 1-2:1.2: GSM modem (1-port) converter detected
- [ 17.109961] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB2
- [ 17.109975] option 1-2:1.3: GSM modem (1-port) converter detected
- [ 17.110022] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB3
- [ 17.110072] usbcore: registered new interface driver option
- [ 17.110073] option: v0.7.2:USB Driver for GSM modems
- [ 17.139054] type=1505 audit(1337363142.767:2): operation="profile_load" pid=556 name="/sbin/dhclient3"
- [ 17.139357] type=1505 audit(1337363142.767:3): operation="profile_load" pid=556 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
- [ 17.139532] type=1505 audit(1337363142.767:4): operation="profile_load" pid=556 name="/usr/lib/connman/scripts/dhclient-script"
- [ 17.203528] parport_pc 00:06: reported by Plug and Play ACPI
- [ 17.203645] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
- [ 17.297874] eth1: ULi M5263 at pci0000:00:0d.0, 00:13:8f:1b:fb:4f, irq 17.
- [ 17.297933] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- [ 17.298105] agpgart-ali 0000:00:00.0: unsupported ALi chipset [10b9/1689])
- [ 17.300435] lp0: using parport0 (interrupt-driven).
- [ 17.358803] ppdev: user-space parallel port driver
- [ 17.379188] agpgart-amd64 0000:00:00.0: AGP bridge [10b9/1689]
- [ 17.379197] agpgart-amd64 0000:00:00.0: aperture size 4096 MB is not right, using settings from NB
- [ 17.379204] agpgart-amd64 0000:00:00.0: setting up ULi AGP
- [ 17.464222] agpgart-amd64 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
- [ 17.540823] gameport: NS558 PnP Gameport is pnp00:07/gameport0, io 0x200, speed 840kHz
- [ 17.574298] [drm] Initialized drm 1.1.0 20060810
- [ 17.809743] [drm] radeon defaulting to kernel modesetting.
- [ 17.809747] [drm] radeon kernel modesetting enabled.
- [ 17.809809] alloc irq_desc for 16 on node -1
- [ 17.809812] alloc kstat_irqs on node -1
- [ 17.809821] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 17.823036] [drm] radeon: Initializing kernel modesetting.
- [ 17.827965] [drm] register mmio base: 0xFF4F0000
- [ 17.827970] [drm] register mmio size: 65536
- [ 17.829698] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
- [ 17.832410] [drm] Generation 2 PCI interface, using max accessible memory
- [ 17.832425] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
- [ 17.832445] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
- [ 17.832473] radeon 0000:01:00.0: putting AGP V3 device into 8x mode
- [ 17.832493] [drm] radeon: VRAM 128M
- [ 17.832495] [drm] radeon: VRAM from 0x00000000 to 0x07FFFFFF
- [ 17.832498] [drm] radeon: GTT 128M
- [ 17.832500] [drm] radeon: GTT from 0xF0000000 to 0xF7FFFFFF
- [ 17.832545] [drm] radeon: irq initialized.
- [ 17.832723] [drm] Detected VRAM RAM=128M, BAR=128M
- [ 17.832728] [drm] RAM width 64bits DDR
- [ 17.835250] [TTM] Zone kernel: Available graphics memory: 443574 kiB.
- [ 17.835254] [TTM] Zone highmem: Available graphics memory: 513050 kiB.
- [ 17.835279] [drm] radeon: 128M of VRAM memory ready
- [ 17.835282] [drm] radeon: 128M of GTT memory ready.
- [ 17.835528] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
- [ 17.835540] [drm] radeon: cp idle (0x10000C03)
- [ 17.835674] [drm] Loading R300 Microcode
- [ 17.836104] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
- [ 17.849390] [drm] radeon: ring at 0x00000000F0000000
- [ 17.849414] [drm] ring test succeeded in 1 usecs
- [ 17.861124] [drm] radeon: ib pool ready.
- [ 17.861207] [drm] ib test succeeded in 0 usecs
- [ 17.862460] [drm] Default TV standard: PAL
- [ 17.862463] [drm] 27.000000000 MHz TV ref clk
- [ 17.862467] [drm] DFP table revision: 3
- [ 17.863014] [drm] Default TV standard: PAL
- [ 17.863016] [drm] 27.000000000 MHz TV ref clk
- [ 17.863150] [drm] Radeon Display Connectors
- [ 17.863152] [drm] Connector 0:
- [ 17.863154] [drm] VGA
- [ 17.863157] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
- [ 17.863159] [drm] Encoders:
- [ 17.863161] [drm] CRT1: INTERNAL_DAC1
- [ 17.863162] [drm] Connector 1:
- [ 17.863164] [drm] DVI-I
- [ 17.863165] [drm] HPD1
- [ 17.863168] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
- [ 17.863170] [drm] Encoders:
- [ 17.863171] [drm] CRT2: INTERNAL_DAC2
- [ 17.863173] [drm] DFP1: INTERNAL_TMDS1
- [ 17.863175] [drm] Connector 2:
- [ 17.863176] [drm] S-video
- [ 17.863178] [drm] Encoders:
- [ 17.863179] [drm] TV1: INTERNAL_DAC2
- [ 17.966787] type=1505 audit(1337363143.595:5): operation="profile_load" pid=834 name="/usr/share/gdm/guest-session/Xsession"
- [ 17.973776] type=1505 audit(1337363143.603:6): operation="profile_replace" pid=835 name="/sbin/dhclient3"
- [ 17.974092] type=1505 audit(1337363143.603:7): operation="profile_replace" pid=835 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
- [ 17.974273] type=1505 audit(1337363143.603:8): operation="profile_replace" pid=835 name="/usr/lib/connman/scripts/dhclient-script"
- [ 18.050401] Intel ICH 0000:00:04.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- [ 18.057805] type=1505 audit(1337363143.687:9): operation="profile_load" pid=838 name="/usr/bin/evince"
- [ 18.091594] type=1505 audit(1337363143.719:10): operation="profile_load" pid=838 name="/usr/bin/evince-previewer"
- [ 18.107353] type=1505 audit(1337363143.735:11): operation="profile_load" pid=838 name="/usr/bin/evince-thumbnailer"
- [ 18.188502] ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 18.253482] ADDRCONF(NETDEV_UP): eth1: link is not ready
- [ 18.465561] [drm] 2: conflicting encoders switching off SVIDEO-1
- [ 18.465565] [drm] in favor of DVI-I-1
- [ 18.494194] [drm] fb mappable at 0xE0040000
- [ 18.494196] [drm] vram apper at 0xE0000000
- [ 18.494198] [drm] size 4177920
- [ 18.494200] [drm] fb depth is 24
- [ 18.494201] [drm] pitch is 5440
- [ 18.566271] fb0: radeondrmfb frame buffer device
- [ 18.566275] registered panic notifier
- [ 18.566282] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
- [ 18.587195] vga16fb: initializing
- [ 18.587201] vga16fb: mapped to 0xc00a0000
- [ 18.587207] vga16fb: not registering due to another framebuffer present
- [ 18.869338] Console: switching to colour frame buffer device 160x45
- [ 19.088050] AC'97 1 does not respond - RESET
- [ 19.088518] AC'97 1 access is not valid [0xffffffff], removing mixer.
- [ 19.088790] Unable to initialize codec #1
- [ 19.159594] intel8x0_measure_ac97_clock: measured 70070 usecs (3376 samples)
- [ 19.159598] intel8x0: clocking to 48000
- [ 21.252701] uli526x: eth1 NIC Link is Down
- [ 32.490288] ISO 9660 Extensions: Microsoft Joliet Level 1
- [ 32.526052] ISOFS: changing to secondary root
- [ 44.037881] PPP BSD Compression module registered
- [ 44.068679] PPP Deflate Compression module registered
- [ 80.076019] Clocksource tsc unstable (delta = -71960986 ns)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement