Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- U-Boot 2015.04 (Apr 13 2017 - 09:54:36)Actions-Semi
- DRAM: mem-size=1024MB
- 1 GiB
- PLL:core=0x311,dev=0x1164,bus=0x1c710000,bus1=0x2e004,display=0x164, spead=0x0
- MMC: error: SDC0 send CMD8, No rsp
- error: SDC0 send CMD55, No rsp
- error: SDC0 send CMD1, No rsp
- error: SDC2 send CMD8, No rsp
- error: SDC2 send CMD55, No rsp
- SD0: 0, eMMC: 1 (eMMC)
- Using default environment
- *** emmc boot ***
- error: SDC0 send CMD8, No rsp
- error: SDC0 send CMD55, No rsp
- error: SDC0 send CMD1, No rsp
- Failed to find mmc:0
- reading boot_logo.bmp.gz
- reading new_gamma_data
- fdtdec_get_hdmi_par: not support auto ,we used default vid = -1
- cvbs disabled by dts
- def_display_name hdmi
- In: serial
- Out: serial
- Err: serial
- Net: owl_mac
- Warning: owl_mac using MAC address from net device
- Hit any key to stop autoboot: 0
- try boot from mmc card ...
- error: SDC0 send CMD8, No rsp
- error: SDC0 send CMD55, No rsp
- error: SDC0 send CMD1, No rsp
- ** Bad device mmc 0 **
- error: SDC0 send CMD8, No rsp
- error: SDC0 send CMD55, No rsp
- error: SDC0 send CMD1, No rsp
- ** Bad device mmc 0 **
- error: SDC0 send CMD8, No rsp
- error: SDC0 send CMD55, No rsp
- error: SDC0 send CMD1, No rsp
- ** Bad device mmc 0 **
- error: SDC0 send CMD8, No rsp
- error: SDC0 send CMD55, No rsp
- error: SDC0 send CMD1, No rsp
- ** Bad device mmc 0 **
- Wrong Image Format for bootm command
- ERROR: can't get kernel image!
- error: SDC0 send CMD8, No rsp
- error: SDC0 send CMD55, No rsp
- error: SDC0 send CMD1, No rsp
- ** Bad device mmc 0 **
- boot from emmc card ...
- reading uEnv.txt
- 188 bytes read in 2 ms (91.8 KiB/s)
- Loaded environment from uEnv.txt
- Running uenvcmd ...
- reading boot.scr
- ** Unable to read file boot.scr **
- reading uImage
- 6285576 bytes read in 277 ms (21.6 MiB/s)
- reading kernel.dtb
- 34662 bytes read in 4 ms (8.3 MiB/s)
- ## Booting kernel from Legacy Image at 00007fc0 ...
- Image Name: Linux-3.10.100
- Image Type: ARM Linux Kernel Image (uncompressed)
- Data Size: 6285512 Bytes = 6 MiB
- Load Address: 00008000
- Entry Point: 00008000
- Verifying Checksum ... OK
- ## Flattened Device Tree blob at 04000000
- Booting using the fdt blob at 0x4000000
- XIP Kernel Image ... OK
- Using Device Tree in place at 04000000, end 0400b765
- read_mi_head, line 430, magic 0x0, length 0, item num 0
- Starting kernel ...
- [ 0.000000] Linux version 3.10.100 (root@ret) (gcc version 4.8.4 (Ubuntu/Linaro 4.8.4-2ubuntu1~14.04.1) ) #1 SMP PREEMPT Thu Apr 13 10:07:54
- IST 2017
- [ 0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c53c7d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260624
- [ 0.000000] Kernel command line: console=ttyS3 clk_ignore_unused selinux=0 scandelay root=/dev/mmcblk0p2 rw console=ttyS3 rootfstype=ext4 co
- nsole=tty0 loglevel=6 rootwait boot_dev=sd2
- [ 0.000000] Memory: 807776k/807776k available, 240800k reserved, 270336K highmem
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .text : 0xc0008000 - 0xc0b650a0 (11637 kB)
- [ 0.000000] .init : 0xc0b66000 - 0xc0bd43c0 ( 441 kB)
- [ 0.000000] .data : 0xc0bd6000 - 0xc0c63ebc ( 568 kB)
- [ 0.000000] .bss : 0xc0c63ebc - 0xc0daf10c (1325 kB)
- [ 0.139549] CPU1: Booted secondary processor
- [ 0.209621] CPU2: Booted secondary processor
- [ 0.279574] CPU3: Booted secondary processor
- [ 0.781241] sirq map 45 -> 213
- [ 0.781320] sirq map 46 -> 214
- [ 0.781382] sirq map 47 -> 215
- [ 0.792374] free reserve pages 256 to buddy system
- [ 0.808746] i2c i2c-2: of_i2c: invalid reg on /i2c@b0178000/mpu6515@68
- [ 1.007603] raid6: int32x1 26 MB/s
- [ 1.176769] raid6: int32x2 39 MB/s
- [ 1.345900] raid6: int32x4 44 MB/s
- [ 1.516031] raid6: int32x8 44 MB/s
- [ 1.516094] raid6: using algorithm int32x8 (44 MB/s)
- [ 1.516150] raid6: using intx1 recovery algorithm
- [ 1.528845] atc260x_i2c 0-0065: icm_ohm not config, use default value
- [ 1.564066] atc260x-switch-ldo atc2603c-switch1.1: pmic_ver=0
- [ 1.564358] [SWITCH1] set switch 1 to ldo mode Version D!
- [ 1.577529] atc260x-pm atc2603c-pm.0: _set_s2_mode() can not get of_property s2_mode
- [ 1.582807] SCSI subsystem initialized
- [ 1.732891] owl_uart: no device is found
- [ 1.957034] ## boot_dev: 0x22
- [ 1.961857] type=2000 audit(1.950:1): initialized
- [ 2.000567] NFS: Registering the id_resolver key type
- [ 2.005807] Key type id_resolver registered
- [ 2.010105] Key type id_legacy registered
- [ 2.016049] Key type cifs.spnego registered
- [ 2.020441] Key type cifs.idmap registered
- [ 2.033053] Running btrfs free space cache tests
- [ 2.037790] Running extent only tests
- [ 2.041551] Running bitmap only tests
- [ 2.045331] Running bitmap and extent tests
- [ 2.049802] Free space cache tests finished
- [ 2.068060] #### insmod vde driver!
- [ 2.115516] owl pinctrl: 1pinmux_request_check_gpio
- [ 2.120619] owl pinctrl: 1CHECK PMX:P_LVDS_OBN has already been requested by owl-gpio:49
- [ 2.128815] owl_dss LCDC: error!lcdchw_parse_params, fail to get lcd reset gpio
- [ 2.136423] owl_dss LCDC: error!lcdchw_parse_params, fail to get lcd standby gpio
- [ 2.144913] current type lcd
- [ 2.151249] timings : xres 1280 yres 720 size of 40 4
- [ 2.156733] Actions CEC for OWL Driver, (c) 2009 ACTIONS Electronics
- [ 2.164853] generic_cvbs_panel_drv_init r -1
- [ 2.196394] no blk dev
- [ 2.198803] read MiscInfoHeader failed
- [ 2.202581] read Head failed
- [ 2.205484] OWL_HDMI_ERR: failed to read hdcp key from secure storage
- [ 2.238229] GS705A phy init for dwc3 gadget 10:07:08
- [ 2.244036] GS705A phy init for dwc3 gadget 10:07:08
- [ 2.296689] can't find vbus_otg1_en_gpio config
- [ 2.326364] Realtek h5 driver version 1.0.1
- [ 2.330610] HCI Realtek H5 protocol initialized
- [ 2.337048] ## host_id: 0 boot_dev 22 host->index: 1
- [ 2.344504] ## host_id: 1 boot_dev 22 host->index: 2
- [ 2.352341] ## host_id: 2 boot_dev 22 host->index: 0
- [ 2.359438] leds-gpio leds.6: pins are not configured from the driver
- [ 2.366036] owl pinctrl: 1gpio_request_check_pinmux
- [ 2.371117] owl pinctrl: 1CHECK PMX:P_LVDS_ODP has already been requested by b02a0000.lcd0
- [ 2.399423] soc-audio soc-audio: ASoC: machine atm7059_link should use snd_soc_register_card()
- [ 2.551945] atc2603c-audio atc260x-audio: ASoC: no dapm match for AOUT FL FR Mixer --> AOUT MIXER --> ADC0 Mux
- [ 2.562147] atc2603c-audio atc260x-audio: ASoC: Failed to add route AOUT FL FR Mixer -> AOUT MIXER -> ADC0 Mux
- [ 2.600275] Bridge firewalling registered
- [ 2.605719] Key type dns_resolver registered
- [ 2.611344] train_Msize:1024, train_ces:1
- [ 2.658457] start:0xc0008000, end:0xc0b650a0, checksum:0x845af4d8
- [ 2.667418] fbdev info : xres 1280 yres 720 refresh 60 name hdmi
- [ 2.764237] mmc_add_card: bootdev 0x22
- [ 2.768154] force sd2(emmc) host emmc_boot_card
- [ 2.874315] owldss_hdmi_read_edid ~~~ error hdmi not connected
- [ 3.039388] of_property_read_u32 is error
- [ 3.061893] clk: Not disabling unused clocks
- [ 3.081609] EXT4-fs (mmcblk0p2): warning: mounting fs with errors, running e2fsck is recommended
- bus_id 0
- bus_mfp 0
- pmu_id 3
- vddr_pmu_dcdc_cfg 4
- ddr_clk 468
- ddr_cap 1024
- ddr_bits_width 0
- rank 1
- ddr_type 0
- row_col 0
- rdodt 0
- wrodt 0
- zpzq 12
- rx_tx_adfu 0
- uart_id 3
- uart_baudrate 115200
- uart_pad 0
- jtag_pad 0
- bootdev 34
- version 1.1
- scan 1
- busid = 0bus_mfp = 0pmu_id = 3vddr_pmu_dcdc_cfg = 4
- ddr_clk = 0x1d4 ddr_cap = 400 ddr_bits_width = 0 rank = 1 ddr_type = 0 row_col = 0 rdodt = 0 wrodt = 0 zpzq = c, row_col_detect = 68
- consolse init :port 3, baudrate 115200 mfp 0
- pmu init
- busid = 0bus_mfp = 0pmu_id = 3vddr_pmu_dcdc_cfg = 4
- g_current_bus = 00x51:0x8d0:0x8d0
- 0x39:0x3228:0x3228
- 0x14:0x84cf
- VERSION A:set val = 0x84cf
- 0x14:0x84cf:0x84cf
- 0x62:0x0
- 0x15:0x6cae:0x6cae
- 0x16:0x334b:0x334b
- ATC2609A_PMU_SYS_CTL3 = 17024
- ,s2 flag = 0
- check adfu
- reg_val = 0x0ddr init
- ddr_cap = 0 row_col = 0 row_col_detect = 0
- DRAM init mode0,type0,2cs,x32,468MHz,0x0.@150616_R...Fail:0x8023,0x8023,0x8023,0x8023;0x0,0x0,0x0,0x0
- DRAM init mode0,type0,1cs,x32,468MHz,0x334d.@150616_R...Ok:1024MByte Cap.
- ddr size=1024MB
- load app
- load uboot: load address is 0x8000000, entry point is 0x8000040
- in fourth
- dvfs = 0xc583bb75
- SDC0 cfg:(MFP_CTL2=0x0 PAD_PULLCTL1=0x203e001)
- mmc->clock=187500
- low rate:0x100
- error: SDC0 send CMD8, No rsp
- error: SDC0 send CMD55, No rsp
- sd scan fail
- slot:0, error mmc_init
- error:-1,mmc rescan fail
- no sd card
- ddr scan = 1
- dvfs maigc = 0x44564653, dvfs = 0xc583bb75ddr_clk = 0x1d4 ddr_cap = 400 ddr_bits_width = 0 rank = 1 ddr_type = 0 row_col = 0 rdodt = 0 wrodt
- = 0 zpzq = c, row_col_detect = 68
- mmc->clock=187500
- low rate:0x100
- error: SDC2 send CMD8, No rsp
- error: SDC2 send CMD55, No rsp
- go to try mmc card
- mmc->clock=52000000
- high:0x0
- boot sd/emmc init ok
- mmc cap:6881280
Add Comment
Please, Sign In to add comment