API tools faq
paste
Guest User

Cubietruck booting with kernel 3.4.79-1-ARCH

a guest
Mar 12th, 2014
343
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 47.38 KB | None | 0 0
raw download clone embed print report
  1.  
  2. U-Boot SPL 2014.01-09730-gb5bd4c9 (Mar 11 2014 - 17:48:55)
  3. Board: Cubietruck
  4. DRAM: 2048 MiB
  5. CPU: 960000000Hz, AXI/AHB/APB: 3/2/2
  6. spl: not an uImage at 1600
  7.  
  8.  
  9. U-Boot 2014.01-09730-gb5bd4c9 (Mar 11 2014 - 17:48:55) Allwinner Technology
  10.  
  11. CPU: Allwinner A20 (SUN7I)
  12. Board: Cubietruck
  13. I2C: ready
  14. DRAM: 2 GiB
  15. WARNING: Caches not enabled
  16. MMC: SUNXI SD/MMC: 0
  17. *** Warning - bad CRC, using default environment
  18.  
  19. In: serial
  20. Out: serial
  21. Err: serial
  22. Net: mii0
  23. Warning: failed to set MAC address
  24.  
  25. Hit any key to stop autoboot: 3  2  1  0
  26. ** Unrecognized filesystem type **
  27. 14 bytes read in 14 ms (1000 Bytes/s)
  28. Loaded environment from uEnv.txt
  29. ** Unrecognized filesystem type **
  30. ** File not found boot/boot.scr **
  31. ** File not found boot.scr **
  32. 44864 bytes read in 14 ms (3.1 MiB/s)
  33. 3218536 bytes read in 188 ms (16.3 MiB/s)
  34. ## Booting kernel from Legacy Image at 48000000 ...
  35. Image Name: Linux-3.4.79-1-ARCH
  36. Created: 2014-03-10 20:49:33 UTC
  37. Image Type: ARM Linux Kernel Image (uncompressed)
  38. Data Size: 3218472 Bytes = 3.1 MiB
  39. Load Address: 40008000
  40. Entry Point: 40008000
  41. Verifying Checksum ... OK
  42. Loading Kernel Image ... OK
  43. Using machid 0x10bb from environment
  44.  
  45. Starting kernel ...
  46.  
  47. <6>Booting Linux on physical CPU 0
  48. <6>Initializing cgroup subsys cpuset
  49. <6>Initializing cgroup subsys cpu
  50. <5>Linux version 3.4.79-1-ARCH (moscar@pluto) (gcc version 4.8.2 20131219 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Mar 10 21:49:02 CET 2014
  51. CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
  52. CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  53. Machine: sun7i
  54. <6>Memory Reserved:
  55. <6> SYS : 0x43000000 - 0x4300ffff ( 64 kB)
  56. <6> VE : 0x44000000 - 0x48ffffff ( 80 MB)
  57. <6> G2D : 0x49000000 - 0x49ffffff ( 16 MB)
  58. <6> LCD : 0x4a000000 - 0x4bffffff ( 32 MB)
  59. Memory policy: ECC disabled, Data cache writealloc
  60. <6>sunxi: Allwinner A20 (AW1651/sun7i) detected.
  61. <7>On node 0 totalpages: 524288
  62. <7>free_area_init_node: node 0, pgdat c060c840, node_mem_map d0000000
  63. <7> DMA zone: 576 pages used for memmap
  64. <7> DMA zone: 0 pages reserved
  65. <7> DMA zone: 64960 pages, LIFO batch:15
  66. <7> Normal zone: 1134 pages used for memmap
  67. <7> Normal zone: 127890 pages, LIFO batch:31
  68. <7> HighMem zone: 2898 pages used for memmap
  69. <7> HighMem zone: 326830 pages, LIFO batch:31
  70. <6>PERCPU: Embedded 7 pages/cpu @d120e000 s6272 r8192 d14208 u32768
  71. <7>pcpu-alloc: s6272 r8192 d14208 u32768 alloc=8*4096<c>
  72. <7>pcpu-alloc: <c>[0] <c>0 <c>[0] <c>1 <c>
  73. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519680
  74. <5>Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait loglevel=8 panic=10
  75. <6>PID hash table entries: 4096 (order: 2, 16384 bytes)
  76. <6>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  77. <6>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  78. <6>allocated 4194304 bytes of page_cgroup
  79. <6>please try 'cgroup_disable=memory' option if you don't want memory cgroups
  80. <6>Memory: 2048MB = 2048MB total
  81. <5>Memory: 1936000k/1936000k available, 161152k reserved, 1318912K highmem
  82. <5>Virtual kernel memory layout:
  83. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  84. fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  85. vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  86. lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  87. pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  88. modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  89. .text : 0xc0008000 - 0xc059e708 (5722 kB)
  90. .init : 0xc059f000 - 0xc05cb880 ( 179 kB)
  91. .data : 0xc05cc000 - 0xc060d820 ( 263 kB)
  92. .bss : 0xc060d844 - 0xc066a7b8 ( 372 kB)
  93. <6>SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  94. <6>Preemptible hierarchical RCU implementation.
  95. <6>NR_IRQS:192
  96. <6>Architected local timer running at 24.00MHz.
  97. <6>sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  98. <2>start_kernel(): bug: interrupts were enabled early
  99. <6>Console: colour dummy device 80x30
  100. <6>Calibrating delay loop... <c>1915.28 BogoMIPS (lpj=9576448)
  101. <6>pid_max: default: 32768 minimum: 301
  102. <6>Mount-cache hash table entries: 512
  103. <6>Initializing cgroup subsys cpuacct
  104. <6>Initializing cgroup subsys memory
  105. <6>Initializing cgroup subsys devices
  106. <6>Initializing cgroup subsys freezer
  107. <6>CPU: Testing write buffer coherency: ok
  108. <6>CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  109. <6>Setting up static identity map for 0x40410720 - 0x40410778
  110. CPU1: Booted secondary processor
  111. <6>CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  112. <6>Brought up 2 CPUs
  113. <6>SMP: Total of 2 processors activated (3830.57 BogoMIPS).
  114. <6>devtmpfs: initialized
  115. <6>dummy:
  116. <6>NET: Registered protocol family 16
  117. <6>DMA: preallocated 256 KiB pool for atomic coherent allocations
  118. <6>[ccu-inf] aw clock manager init
  119. <6>[ccu-inf] aw_ccu_init
  120. <6>[ccu-inf] script config pll3 to 297MHz
  121. <6>[ccu-inf] script config pll4 to 300MHz
  122. <6>[ccu-inf] script config pll6 to 600MHz
  123. <6>[ccu-inf] script config pll7 to 297MHz
  124. <6>[ccu-inf] script config pll8 to 336MHz
  125. <6>Init eGon pin module V2.0
  126. <6>bio: create slab <bio-0> at 0
  127. <6>sunxi_gpio driver init ver 1.3
  128. <6>gpiochip_add: registered GPIOs 1 to 1 on device: A1X_GPIO
  129. <5>SCSI subsystem initialized
  130. <7>libata version 3.00 loaded.
  131. <6>usbcore: registered new interface driver usbfs
  132. <6>usbcore: registered new interface driver hub
  133. <6>usbcore: registered new device driver usb
  134. <6>Linux media interface: v0.10
  135. <6>Advanced Linux Sound Architecture Driver Version 1.0.25.
  136. <6>Switching to clocksource arch_sys_counter
  137. <5>FS-Cache: Loaded
  138. <6>CacheFiles: Loaded
  139. [usb_manager]: CONFIG_USB_SW_SUNXI_USB0_OTG
  140. [sw_hcd0]: usb host driver initialize........
  141. [sw_udc]: udc_init: version 20080411
  142. [sw_udc]: usb_vbase = 0xf1c13000
  143. [sw_udc]: sram_vbase = 0xf1c00000
  144. [sw_udc]: open_usb_clock
  145. udc->driver is null, udc is need not stop
  146. <6>NET: Registered protocol family 2
  147. <6>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  148. <6>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  149. <6>TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
  150. <6>TCP: Hash tables configured (established 131072 bind 65536)
  151. <6>TCP: reno registered
  152. <6>UDP hash table entries: 512 (order: 2, 16384 bytes)
  153. <6>UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  154. <6>NET: Registered protocol family 1
  155. <6>RPC: Registered named UNIX socket transport module.
  156. <6>RPC: Registered udp transport module.
  157. <6>RPC: Registered tcp transport module.
  158. <6>RPC: Registered tcp NFSv4.1 backchannel transport module.
  159. pm: select wifi: rtl8188eu
  160. <4>wifi_pm: Unsupported wifi type!
  161. [wifi_pm]: wifi gpio init is OK !!
  162. <6>[PM] bt is disable at script fex
  163. highmem bounce pool size: 64 pages
  164. <5>VFS: Disk quotas dquot_6.5.2
  165. Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  166. <5>NFS: Registering the id_resolver key type
  167. <5>FS-Cache: Netfs 'nfs' registered for caching
  168. <6>nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  169. <6>msgmni has been set to 1205
  170. <6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  171. <6>io scheduler noop registered
  172. <6>io scheduler deadline registered
  173. <6>io scheduler cfq registered (default)
  174. <6>Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
  175. <6>[uart]: used uart info.: 0x05
  176. <6>[uart]: serial probe 0 irq 33 mapbase 0x01c28000
  177. <6>sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 33) is a U6_16550A
  178. [ 0.000000] Booting Linux on physical CPU 0
  179. [ 0.000000] Initializing cgroup subsys cpuset
  180. [ 0.000000] Initializing cgroup subsys cpu
  181. [ 0.000000] Linux version 3.4.79-1-ARCH (moscar@pluto) (gcc version 4.8.2 20131219 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Mar 10 21:49:02 CET 2014
  182. [ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
  183. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  184. [ 0.000000] Machine: sun7i
  185. [ 0.000000] Memory Reserved:
  186. [ 0.000000] SYS : 0x43000000 - 0x4300ffff ( 64 kB)
  187. [ 0.000000] VE : 0x44000000 - 0x48ffffff ( 80 MB)
  188. [ 0.000000] G2D : 0x49000000 - 0x49ffffff ( 16 MB)
  189. [ 0.000000] LCD : 0x4a000000 - 0x4bffffff ( 32 MB)
  190. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  191. [ 0.000000] sunxi: Allwinner A20 (AW1651/sun7i) detected.
  192. [ 0.000000] On node 0 totalpages: 524288
  193. [ 0.000000] free_area_init_node: node 0, pgdat c060c840, node_mem_map d0000000
  194. [ 0.000000] DMA zone: 576 pages used for memmap
  195. [ 0.000000] DMA zone: 0 pages reserved
  196. [ 0.000000] DMA zone: 64960 pages, LIFO batch:15
  197. [ 0.000000] Normal zone: 1134 pages used for memmap
  198. [ 0.000000] Normal zone: 127890 pages, LIFO batch:31
  199. [ 0.000000] HighMem zone: 2898 pages used for memmap
  200. [ 0.000000] HighMem zone: 326830 pages, LIFO batch:31
  201. [ 0.000000] PERCPU: Embedded 7 pages/cpu @d120e000 s6272 r8192 d14208 u32768
  202. [ 0.000000] pcpu-alloc: s6272 r8192 d14208 u32768 alloc=8*4096
  203. [ 0.000000] pcpu-alloc: [0] 0 [0] 1
  204. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519680
  205. [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait loglevel=8 panic=10
  206. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  207. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  208. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  209. [ 0.000000] allocated 4194304 bytes of page_cgroup
  210. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  211. [ 0.000000] Memory: 2048MB = 2048MB total
  212. [ 0.000000] Memory: 1936000k/1936000k available, 161152k reserved, 1318912K highmem
  213. [ 0.000000] Virtual kernel memory layout:
  214. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  215. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  216. [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  217. [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  218. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  219. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  220. [ 0.000000] .text : 0xc0008000 - 0xc059e708 (5722 kB)
  221. [ 0.000000] .init : 0xc059f000 - 0xc05cb880 ( 179 kB)
  222. [ 0.000000] .data : 0xc05cc000 - 0xc060d820 ( 263 kB)
  223. [ 0.000000] .bss : 0xc060d844 - 0xc066a7b8 ( 372 kB)
  224. [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  225. [ 0.000000] Preemptible hierarchical RCU implementation.
  226. [ 0.000000] NR_IRQS:192
  227. [ 0.000000] Architected local timer running at 24.00MHz.
  228. [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  229. [ 0.000000] start_kernel(): bug: interrupts were enabled early
  230. [ 0.000000] Console: colour dummy device 80x30
  231. [ 0.010914] Calibrating delay loop... 1915.28 BogoMIPS (lpj=9576448)
  232. [ 0.076014] pid_max: default: 32768 minimum: 301
  233. [ 0.079751] Mount-cache hash table entries: 512
  234. [ 0.084100] Initializing cgroup subsys cpuacct
  235. [ 0.087422] Initializing cgroup subsys memory
  236. [ 0.090846] Initializing cgroup subsys devices
  237. [ 0.094283] Initializing cgroup subsys freezer
  238. [ 0.097855] CPU: Testing write buffer coherency: ok
  239. [ 0.103119] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  240. [ 0.108710] Setting up static identity map for 0x40410720 - 0x40410778
  241. [ 0.219471] CPU1: Booted secondary processor
  242. [ 0.277994] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  243. [ 0.279986] Brought up 2 CPUs
  244. [ 0.285295] SMP: Total of 2 processors activated (3830.57 BogoMIPS).
  245. [ 0.288694] devtmpfs: initialized
  246. [ 0.294187] dummy:
  247. [ 0.297905] NET: Registered protocol family 16
  248. [ 0.304543] DMA: preallocated 256 KiB pool for atomic coherent allocations
  249. [ 0.308244] [ccu-inf] aw clock manager init
  250. [ 0.310545] [ccu-inf] aw_ccu_init
  251. [ 0.314481] [ccu-inf] script config pll3 to 297MHz
  252. [ 0.318230] [ccu-inf] script config pll4 to 300MHz
  253. [ 0.321976] [ccu-inf] script config pll6 to 600MHz
  254. [ 0.325733] [ccu-inf] script config pll7 to 297MHz
  255. [ 0.329481] [ccu-inf] script config pll8 to 336MHz
  256. [ 0.332218] Init eGon pin module V2.0
  257. [ 0.339839] bio: create slab <bio-0> at 0
  258. [ 0.343414] sunxi_gpio driver init ver 1.3
  259. [ 0.349007] gpiochip_add: registered GPIOs 1 to 1 on device: A1X_GPIO
  260. [ 0.352119] SCSI subsystem initialized
  261. [ 0.355127] libata version 3.00 loaded.
  262. [ 0.359794] usbcore: registered new interface driver usbfs
  263. [ 0.364149] usbcore: registered new interface driver hub
  264. [ 0.368284] usbcore: registered new device driver usb
  265. [ 0.371389] Linux media interface: v0.10
  266. [ 0.377033] Advanced Linux Sound Architecture Driver Version 1.0.25.
  267. [ 0.381832] Switching to clocksource arch_sys_counter
  268. [ 0.383941] FS-Cache: Loaded
  269. [ 0.386087] CacheFiles: Loaded
  270. [ 0.393657] [usb_manager]: CONFIG_USB_SW_SUNXI_USB0_OTG
  271. [ 0.397339] [sw_hcd0]: usb host driver initialize........
  272. [ 0.401413] [sw_udc]: udc_init: version 20080411
  273. [ 0.404792] [sw_udc]: usb_vbase = 0xf1c13000
  274. [ 0.407853] [sw_udc]: sram_vbase = 0xf1c00000
  275. [ 0.410940] [sw_udc]: open_usb_clock
  276. [ 0.436083] udc->driver is null, udc is need not stop
  277. [ 0.440004] NET: Registered protocol family 2
  278. [ 0.446551] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  279. [ 0.455284] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  280. [ 0.464615] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
  281. [ 0.471293] TCP: Hash tables configured (established 131072 bind 65536)
  282. [ 0.473482] TCP: reno registered
  283. [ 0.478412] UDP hash table entries: 512 (order: 2, 16384 bytes)
  284. [ 0.483784] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  285. [ 0.487532] NET: Registered protocol family 1
  286. [ 0.492833] RPC: Registered named UNIX socket transport module.
  287. [ 0.496588] RPC: Registered udp transport module.
  288. [ 0.500245] RPC: Registered tcp transport module.
  289. [ 0.505635] RPC: Registered tcp NFSv4.1 backchannel transport module.
  290. [ 0.508526] pm: select wifi: rtl8188eu
  291. [ 0.511802] wifi_pm: Unsupported wifi type!
  292. [ 0.514959] [wifi_pm]: wifi gpio init is OK !!
  293. [ 0.518283] [PM] bt is disable at script fex
  294. [ 0.522932] highmem bounce pool size: 64 pages
  295. [ 0.534409] VFS: Disk quotas dquot_6.5.2
  296. [ 0.539967] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  297. [ 0.546503] NFS: Registering the id_resolver key type
  298. [ 0.550878] FS-Cache: Netfs 'nfs' registered for caching
  299. [ 0.557225] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  300. [ 0.560494] msgmni has been set to 1205
  301. [ 0.568519] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  302. [ 0.571406] io scheduler noop registered
  303. [ 0.574631] io scheduler deadline registered
  304. [ 0.578349] io scheduler cfq registered (default)
  305. [ 0.586566] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
  306. [ 0.589981] [uart]: used uart info.: 0x05
  307. [ 0.594663] [uart]: serial probe 0 irq 33 mapbase 0x01c28000
  308. [ 0.620893] sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 33) is a U6_16550A
  309. <6>console [ttyS0] enabled
  310. [ 1.305100] console [ttyS0] enabled
  311. <6>[uart]: serial probe 2 irq 35 mapbase 0x01c28800
  312. [ 1.313429] [uart]: serial probe 2 irq 35 mapbase 0x01c28800
  313. <4>sunxi-uart: probe of sunxi-uart.2 failed with error -28
  314. [ 1.324321] sunxi-uart: probe of sunxi-uart.2 failed with error -28
  315. <7>G2D: drv_g2d_init
  316. [ 1.332946] G2D: drv_g2d_init
  317. <6>G2D: g2dmem: g2d_start=49000000, g2d_size=1000000
  318. [ 1.340625] G2D: g2dmem: g2d_start=49000000, g2d_size=1000000
  319. <6>G2D: head:c9000000,tail:ca000000
  320. [ 1.349593] G2D: head:c9000000,tail:ca000000
  321. <6>G2D: Module initialized.major:251
  322. [ 1.357196] G2D: Module initialized.major:251
  323. <6>loop: module loaded
  324. [ 1.367025] loop: module loaded
  325. [NAND] nand driver version: 0x2 0x9
  326. [ 1.373503] [NAND] nand driver version: 0x2 0x9
  327. <4>Dev Sunxi softw311 nand magic does not match for MBR 1: softw411
  328. [ 1.430973] Dev Sunxi softw311 nand magic does not match for MBR 1: softw411
  329. <4>Dev Sunxi softw311 nand magic does not match for MBR 2:
  330. [ 1.444056] Dev Sunxi softw311 nand magic does not match for MBR 2:
  331. <4>Dev Sunxi softw311 nand magic does not match for MBR 3:
  332. [ 1.457104] Dev Sunxi softw311 nand magic does not match for MBR 3:
  333. <4>Dev Sunxi softw311 nand magic does not match for MBR 4:
  334. [ 1.470164] Dev Sunxi softw311 nand magic does not match for MBR 4:
  335. <4>Dev Sunxi softw311 nand header bad for all MBR copies, MBR corrupted or not present.
  336. [ 1.484943] Dev Sunxi softw311 nand header bad for all MBR copies, MBR corrupted or not present.
  337. <4>Dev Sunxi softw411 nand: part 1, start 32768, size 32768
  338. [ 1.503454] Dev Sunxi softw411 nand: part 1, start 32768, size 32768
  339. <4>Dev Sunxi softw411 nand: part 2, start 65536, size 32768
  340. [ 1.515147] Dev Sunxi softw411 nand: part 2, start 65536, size 32768
  341. <4>Dev Sunxi softw411 nand: part 3, start 98304, size 32768
  342. [ 1.526818] Dev Sunxi softw411 nand: part 3, start 98304, size 32768
  343. <4>Dev Sunxi softw411 nand: part 4, start 131072, size 1048576
  344. [ 1.538736] Dev Sunxi softw411 nand: part 4, start 131072, size 1048576
  345. <4>Dev Sunxi softw411 nand: part 5, start 1179648, size 1048576
  346. [ 1.550998] Dev Sunxi softw411 nand: part 5, start 1179648, size 1048576
  347. <4>Dev Sunxi softw411 nand: part 6, start 2228224, size 32768
  348. [ 1.563172] Dev Sunxi softw411 nand: part 6, start 2228224, size 32768
  349. <4>Dev Sunxi softw411 nand: part 7, start 2260992, size 65536
  350. [ 1.575172] Dev Sunxi softw411 nand: part 7, start 2260992, size 65536
  351. <4>Dev Sunxi softw411 nand: part 8, start 2326528, size 655360
  352. [ 1.587260] Dev Sunxi softw411 nand: part 8, start 2326528, size 655360
  353. <4>Dev Sunxi softw411 nand: part 9, start 2981888, size 32768
  354. [ 1.599349] Dev Sunxi softw411 nand: part 9, start 2981888, size 32768
  355. <4>Dev Sunxi softw411 nand: part 10, start 3014656, size 524288
  356. [ 1.611529] Dev Sunxi softw411 nand: part 10, start 3014656, size 524288
  357. <4>Dev Sunxi softw411 nand: part 11, start 3538944, size 11501568
  358. [ 1.624051] Dev Sunxi softw411 nand: part 11, start 3538944, size 11501568
  359. <6> nand: nanda nandb nandc nandd nande nandf nandg nandh nandi nandj nandk
  360. [ 1.637614] nand: nanda nandb nandc nandd nande nandf nandg nandh nandi nandj nandk
  361. [NAND]nand driver, ok.
  362. [ 1.649549] [NAND]nand driver, ok.
  363. <6>sw_ahci sw_ahci.0: controller can't do PMP, turning off CAP_PMP
  364. [ 1.659342] sw_ahci sw_ahci.0: controller can't do PMP, turning off CAP_PMP
  365. <4>sw_ahci sw_ahci.0: forcing PORTS_IMPL to 0x1
  366. [ 1.670586] sw_ahci sw_ahci.0: forcing PORTS_IMPL to 0x1
  367. <6>sw_ahci sw_ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
  368. [ 1.683360] sw_ahci sw_ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
  369. <6>sw_ahci sw_ahci.0: flags: ncq sntf pm led clo only pio slum part ccc
  370. [ 1.698237] sw_ahci sw_ahci.0: flags: ncq sntf pm led clo only pio slum part ccc
  371. <6>scsi0 : sw_ahci_platform
  372. [ 1.709125] scsi0 : sw_ahci_platform
  373. <6>ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88
  374. [ 1.719839] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88
  375. <6>sunxi_emac Using mii phy on PortA
  376. [ 1.731681] sunxi_emac Using mii phy on PortA
  377. <6>sunxi_emac Using MAC from SID: 02:0d:08:40:cb:d8[ 1.750751] sunxi_emac Using MAC from SID: 02:0d:08:40:cb:d8<6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  378.  
  379. [ 1.763669] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  380. <6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  381. [ 1.775579] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  382. [sw-ehci1]: open clock
  383. [ 1.784134] [sw-ehci1]: open clock
  384. [sw-ehci1]: Set USB Power ON
  385. [ 1.810134] [sw-ehci1]: Set USB Power ON
  386. <6>sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  387. [ 1.820488] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  388. <6>sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 1
  389. [ 1.833986] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 1
  390. <6>sw-ehci sw-ehci.1: irq 71, io mem 0x01c14000
  391. [ 1.845422] sw-ehci sw-ehci.1: irq 71, io mem 0x01c14000
  392. <6>sw-ehci sw-ehci.1: USB 2.0 started, EHCI 1.00
  393. [ 1.866278] sw-ehci sw-ehci.1: USB 2.0 started, EHCI 1.00
  394. <6>hub 1-0:1.0: USB hub found
  395. [ 1.875025] hub 1-0:1.0: USB hub found
  396. <6>hub 1-0:1.0: 1 port detected
  397. [ 1.881656] hub 1-0:1.0: 1 port detected
  398. [sw-ohci1]: open clock
  399. [ 1.888041] [sw-ohci1]: open clock
  400. <6>sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  401. [ 1.917517] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  402. <6>sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 2
  403. [ 1.930664] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 2
  404. <6>sw-ohci sw-ohci.1: irq 96, io mem 0x01c14400
  405. [ 1.942000] sw-ohci sw-ohci.1: irq 96, io mem 0x01c14400
  406. <6>hub 2-0:1.0: USB hub found
  407. [ 2.009162] hub 2-0:1.0: USB hub found
  408. <6>hub 2-0:1.0: 1 port detected
  409. [ 2.015810] hub 2-0:1.0: 1 port detected
  410. [sw-ehci2]: open clock
  411. [ 2.022224] [sw-ehci2]: open clock
  412. [sw-ehci2]: Set USB Power ON
  413. [ 2.048263] [sw-ehci2]: Set USB Power ON
  414. <6>sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  415. [ 2.058618] sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  416. <6>sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 3
  417. <6>ata1: SATA link down (SStatus 0 SControl 300)
  418. [ 2.072113] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 3
  419. [ 2.076469] ata1: SATA link down (SStatus 0 SControl 300)
  420. <6>sw-ehci sw-ehci.2: irq 72, io mem 0x01c1c000
  421. [ 2.093302] sw-ehci sw-ehci.2: irq 72, io mem 0x01c1c000
  422. <6>sw-ehci sw-ehci.2: USB 2.0 started, EHCI 1.00
  423. [ 2.116276] sw-ehci sw-ehci.2: USB 2.0 started, EHCI 1.00
  424. <6>hub 3-0:1.0: USB hub found
  425. [ 2.124965] hub 3-0:1.0: USB hub found
  426. <6>hub 3-0:1.0: 1 port detected
  427. [ 2.131593] hub 3-0:1.0: 1 port detected
  428. [sw-ohci2]: open clock
  429. [ 2.137992] [sw-ohci2]: open clock
  430. <6>sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
  431. [ 2.167462] sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
  432. <6>sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 4
  433. [ 2.180611] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 4
  434. <6>sw-ohci sw-ohci.2: irq 97, io mem 0x01c1c400
  435. [ 2.191941] sw-ohci sw-ohci.2: irq 97, io mem 0x01c1c400
  436. <6>hub 4-0:1.0: USB hub found
  437. [ 2.259153] hub 4-0:1.0: USB hub found
  438. <6>hub 4-0:1.0: 1 port detected
  439. [ 2.265801] hub 4-0:1.0: 1 port detected
  440. <6>Initializing USB Mass Storage driver...
  441. [ 2.273826] Initializing USB Mass Storage driver...
  442. <6>usbcore: registered new interface driver usb-storage
  443. [ 2.283793] usbcore: registered new interface driver usb-storage
  444. <6>USB Mass Storage support registered.
  445. [ 2.293367] USB Mass Storage support registered.
  446. <6>usbcore: registered new interface driver libusual
  447. [ 2.302794] usbcore: registered new interface driver libusual
  448. <6>usbcore: registered new interface driver usbserial
  449. [ 2.313473] usbcore: registered new interface driver usbserial
  450. <6>usbserial: USB Serial Driver core
  451. [ 2.322620] usbserial: USB Serial Driver core
  452. <6>usbcore: registered new interface driver option
  453. [ 2.331546] usbcore: registered new interface driver option
  454. <6>USB Serial support registered for GSM modem (1-port)
  455. [ 2.342110] USB Serial support registered for GSM modem (1-port)
  456. <6>mousedev: PS/2 mouse device common for all mice
  457. [ 2.353054] mousedev: PS/2 mouse device common for all mice
  458. try to request ir_para gpio failed
  459. [ 2.361807] try to request ir_para gpio failed
  460. <6>input: sunxi-ir as /devices/virtual/input/input0
  461. [ 2.371192] input: sunxi-ir as /devices/virtual/input/input0
  462. IR Initial OK
  463. [ 2.378350] IR Initial OK
  464. <3>sunxi-rtc sunxi-rtc: Warning: RTC time is wrong!
  465. [ 2.386161] sunxi-rtc sunxi-rtc: Warning: RTC time is wrong!
  466. <6>sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
  467. [ 2.397136] sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
  468. <6>i2c /dev entries driver
  469. [ 2.405727] i2c /dev entries driver
  470. config i2c gpio with gpio_config api
  471. [ 2.413033] config i2c gpio with gpio_config api
  472. <6>axp_mfd 0-0034: AXP (CHIP ID: 0x41) detected
  473. [ 2.423252] axp_mfd 0-0034: AXP (CHIP ID: 0x41) detected
  474. <6>I2C: i2c-0: AW16XX I2C adapter
  475. [ 2.432245] I2C: i2c-0: AW16XX I2C adapter
  476. <6>I2C: i2c-1: AW16XX I2C adapter
  477. [ 2.439697] I2C: i2c-1: AW16XX I2C adapter
  478. <6>I2C: i2c-2: AW16XX I2C adapter
  479. [ 2.447131] I2C: i2c-2: AW16XX I2C adapter
  480. <3>[ccu-err] clk_enable: invalid handle
  481. [ 2.454848] [ccu-err] clk_enable: invalid handle
  482. <6>I2C: i2c-3: AW16XX I2C adapter
  483. [ 2.462749] I2C: i2c-3: AW16XX I2C adapter
  484. <3>[ccu-err] clk_enable: invalid handle
  485. [ 2.470476] [ccu-err] clk_enable: invalid handle
  486. <6>I2C: i2c-4: AW16XX I2C adapter
  487. [ 2.478331] I2C: i2c-4: AW16XX I2C adapter
  488. <6>lirc_dev: IR Remote Control driver registered, major 250
  489. [ 2.487904] lirc_dev: IR Remote Control driver registered, major 250
  490. [cedar dev]: install start!!!
  491. [ 2.497047] [cedar dev]: install start!!!
  492. [cedar dev]: install end!!!
  493. [ 2.503910] [cedar dev]: install end!!!
  494. [ace_drv] start!!!
  495. [ 2.509510] [ace_drv] start!!!
  496. [ace_drv] init end!!!
  497. [ 2.514824] [ace_drv] init end!!!
  498. <6>Driver for 1-wire Dallas network protocol.
  499. [ 2.522219] Driver for 1-wire Dallas network protocol.
  500. <6>axp20_ldo1: 1300 mV
  501. [ 2.529761] axp20_ldo1: 1300 mV
  502. <6>axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
  503. [ 2.538143] axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
  504. <6>axp20_ldo3: 700 <--> 3500 mV at 2800 mV
  505. [ 2.548189] axp20_ldo3: 700 <--> 3500 mV at 2800 mV
  506. <6>axp20_ldo4: 1250 <--> 3300 mV at 2800 mV
  507. [ 2.558460] axp20_ldo4: 1250 <--> 3300 mV at 2800 mV
  508. <6>axp20_buck2: 700 <--> 2275 mV at 1400 mV
  509. [ 2.568605] axp20_buck2: 700 <--> 2275 mV at 1400 mV
  510. <6>axp20_buck3: 700 <--> 3500 mV at 1250 mV
  511. [ 2.578961] axp20_buck3: 700 <--> 3500 mV at 1250 mV
  512. <6>axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
  513. [ 2.588792] axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
  514. <6>input: axp20-supplyer as /devices/platform/sunxi-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input1
  515. [ 2.603494] input: axp20-supplyer as /devices/platform/sunxi-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input1
  516. <4>axp20_ldo2: Failed to create debugfs directory
  517. [ 2.631044] axp20_ldo2: Failed to create debugfs directory
  518. <6>[mmc-msg] sw_mci_init
  519. [ 2.639509] [mmc-msg] sw_mci_init
  520. <6>[mmc-msg] MMC host used card: 0x1, boot card: 0x0, io_card 0
  521. [ 2.648561] [mmc-msg] MMC host used card: 0x1, boot card: 0x0, io_card 0
  522. <6>[mmc-msg] sdc0 set round clock 400000, src 24000000
  523. [ 2.660387] [mmc-msg] sdc0 set round clock 400000, src 24000000
  524. <6>[mmc-msg] sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  525. [ 2.674510] [mmc-msg] sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  526. <6>[mmc-msg] sdc0 Probe: base:0xf00c8000 irq:64 sg_cpu:f00ca000(4fc00000) ret 0.
  527. [ 2.691719] [mmc-msg] sdc0 Probe: base:0xf00c8000 irq:64 sg_cpu:f00ca000(4fc00000) ret 0.
  528. [mmc_pm]: failed to fetch sdio card configuration!
  529. [ 2.704454] [mmc_pm]: failed to fetch sdio card configuration!
  530. <6>sunxi_leds driver init
  531. [ 2.712643] sunxi_leds driver init
  532. <7>Registered led device: blue:ph21:led2
  533. [ 2.719935] Registered led device: blue:ph21:led2
  534. <6>ledtrig-cpu: registered to indicate activity on CPUs
  535. [ 2.729665] ledtrig-cpu: registered to indicate activity on CPUs
  536. <6>usbcore: registered new interface driver usbhid
  537. [ 2.740410] usbcore: registered new interface driver usbhid
  538. <6>usbhid: USB HID core driver
  539. [ 2.748774] usbhid: USB HID core driver
  540. <6>Netfilter messages via NETLINK v0.30.
  541. [ 2.758125] Netfilter messages via NETLINK v0.30.
  542. <6>TCP: cubic registered
  543. [ 2.765606] TCP: cubic registered
  544. <6>NET: Registered protocol family 10
  545. [ 2.772960] NET: Registered protocol family 10
  546. <6>NET: Registered protocol family 17
  547. [ 2.781941] NET: Registered protocol family 17
  548. <6>lib80211: common routines for IEEE802.11 drivers
  549. [ 2.791101] lib80211: common routines for IEEE802.11 drivers
  550. <7>lib80211_crypt: registered algorithm 'NULL'
  551. [ 2.800941] lib80211_crypt: registered algorithm 'NULL'
  552. [mmc_pm]: No sdio card, please check your config !!
  553. [ 2.810782] [mmc_pm]: No sdio card, please check your config !!
  554. <5>Registering the dns_resolver key type
  555. [ 2.820362] Registering the dns_resolver key type
  556. <6>VFP support v0.3: [ 2.827046] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
  557. implementor 41 architecture 2 part 30 variant 7 rev 4
  558. <6>ThumbEE CPU extension supported.
  559. [ 2.842723] ThumbEE CPU extension supported.
  560. <5>Registering SWP/SWPB emulation handler
  561. [ 2.850759] Registering SWP/SWPB emulation handler
  562. <4>axp20_buck2: Failed to create debugfs directory
  563. [ 2.860156] axp20_buck2: Failed to create debugfs directory
  564. <6>[cpu_freq] INF:-------------------V-F Table-------------------
  565. [ 2.871876] [cpu_freq] INF:-------------------V-F Table-------------------
  566. <6>[cpu_freq] INF: voltage = 1450mv frequency = 1008MHz
  567. [ 2.883803] [cpu_freq] INF: voltage = 1450mv frequency = 1008MHz
  568. <6>[cpu_freq] INF: voltage = 1400mv frequency = 912MHz
  569. [ 2.894935] [cpu_freq] INF: voltage = 1400mv frequency = 912MHz
  570. <6>[cpu_freq] INF: voltage = 1300mv frequency = 864MHz
  571. [ 2.906065] [cpu_freq] INF: voltage = 1300mv frequency = 864MHz
  572. <6>[cpu_freq] INF: voltage = 1200mv frequency = 720MHz
  573. [ 2.917196] [cpu_freq] INF: voltage = 1200mv frequency = 720MHz
  574. <6>[cpu_freq] INF: voltage = 1100mv frequency = 528MHz
  575. [ 2.928326] [cpu_freq] INF: voltage = 1100mv frequency = 528MHz
  576. <6>[cpu_freq] INF: voltage = 1050mv frequency = 312MHz
  577. [ 2.939455] [cpu_freq] INF: voltage = 1050mv frequency = 312MHz
  578. <6>[cpu_freq] INF: voltage = 1050mv frequency = 144MHz
  579. [ 2.950585] [cpu_freq] INF: voltage = 1050mv frequency = 144MHz
  580. <6>[cpu_freq] INF: voltage = 1000mv frequency = 0MHz
  581. [ 2.961714] [cpu_freq] INF: voltage = 1000mv frequency = 0MHz
  582. <6>[cpu_freq] INF:-----------------------------------------------
  583. [ 2.973623] [cpu_freq] INF:-----------------------------------------------
  584. <6>[cpu_freq] INF:sunxi_cpufreq_initcall, get cpu frequency from sysconfig, max freq: 912MHz, min freq: 60MHz
  585. [ 2.990137] [cpu_freq] INF:sunxi_cpufreq_initcall, get cpu frequency from sysconfig, max freq: 912MHz, min freq: 60MHz
  586. <6>registered taskstats version 1
  587. [ 3.004555] registered taskstats version 1
  588. <4>axp20_buck3: incomplete constraints, leaving on
  589. [ 3.013734] axp20_buck3: incomplete constraints, leaving on
  590. <4>axp20_buck2: incomplete constraints, leaving on
  591. [ 3.024062] axp20_buck2: incomplete constraints, leaving on
  592. <4>axp20_ldo4: incomplete constraints, leaving on
  593. [ 3.034296] axp20_ldo4: incomplete constraints, leaving on
  594. <4>axp20_ldo3: incomplete constraints, leaving on
  595. [ 3.044453] axp20_ldo3: incomplete constraints, leaving on
  596. <4>axp20_ldo2: incomplete constraints, leaving on
  597. [ 3.054643] axp20_ldo2: incomplete constraints, leaving on
  598. <4>axp20_ldo1: incomplete constraints, leaving on
  599. [ 3.064797] axp20_ldo1: incomplete constraints, leaving on
  600. <6>sunxi-rtc sunxi-rtc: setting system clock to 2010-01-01 00:00:00 UTC (1262304000)
  601. [ 3.077979] sunxi-rtc sunxi-rtc: setting system clock to 2010-01-01 00:00:00 UTC (1262304000)
  602. <6>ALSA device list:
  603. [ 3.088556] ALSA device list:
  604. <6> #0: sunxi-CODEC Audio Codec
  605. [ 3.094563] #0: sunxi-CODEC Audio Codec
  606. <6>Waiting for root device /dev/mmcblk0p1...
  607. [ 3.103063] Waiting for root device /dev/mmcblk0p1...
  608. <6>[mmc-msg] mmc 0 detect change, present 1
  609. [ 3.670810] [mmc-msg] mmc 0 detect change, present 1
  610. <6>[mmc-msg] sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  611. [ 4.179838] [mmc-msg] sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  612. <6>[mmc-msg] sdc0 power on
  613. [ 4.191239] [mmc-msg] sdc0 power on
  614. <6>[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  615. [ 4.220247] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  616. <6>[mmc-msg] sdc0 set round clock 400000, src 24000000
  617. [ 4.234529] [mmc-msg] sdc0 set round clock 400000, src 24000000
  618. <3>[mmc-err] smc 0 err, cmd 52, RTO
  619. [ 4.317553] [mmc-err] smc 0 err, cmd 52, RTO
  620. <3>[mmc-err] smc 0 err, cmd 52, RTO
  621. [ 4.326037] [mmc-err] smc 0 err, cmd 52, RTO
  622. <6>[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  623. [ 4.338733] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  624. <6>[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  625. [ 4.358836] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  626. <3>[mmc-err] smc 0 err, cmd 5, RTO
  627. [ 4.373578] [mmc-err] smc 0 err, cmd 5, RTO
  628. <3>[mmc-err] smc 0 err, cmd 5, RTO
  629. [ 4.381883] [mmc-err] smc 0 err, cmd 5, RTO
  630. <3>[mmc-err] smc 0 err, cmd 5, RTO
  631. [ 4.390185] [mmc-err] smc 0 err, cmd 5, RTO
  632. <3>[mmc-err] smc 0 err, cmd 5, RTO
  633. [ 4.398487] [mmc-err] smc 0 err, cmd 5, RTO
  634. <6>[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  635. [ 4.411723] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  636. <6>[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  637. [ 4.429456] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  638. <6>[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  639. [ 4.449559] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  640. <6>[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
  641. [ 4.532324] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
  642. <6>[mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
  643. [ 4.550054] [mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
  644. <6>[mmc-msg] sdc0 set round clock 42857143, src 600000000
  645. [ 4.564673] [mmc-msg] sdc0 set round clock 42857143, src 600000000
  646. <6>[mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  647. [ 4.634331] [mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  648. <6>mmc0: new high speed SDHC card at address aaaa
  649. [ 4.648260] mmc0: new high speed SDHC card at address aaaa
  650. <6>mmcblk0: mmc0:aaaa SU16G 14.8 GiB
  651. [ 4.657615] mmcblk0: mmc0:aaaa SU16G 14.8 GiB
  652. <6> mmcblk0: p1
  653. [ 4.665229] mmcblk0: p1
  654. <3>EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities
  655. [ 4.769953] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities
  656. <3>EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities
  657. [ 4.829783] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities
  658. <6>EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
  659. [ 4.918554] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
  660. <6>VFS: Mounted root (ext4 filesystem) on device 179:1.
  661. [ 4.931774] VFS: Mounted root (ext4 filesystem) on device 179:1.
  662. <6>devtmpfs: mounted
  663. [ 4.941751] devtmpfs: mounted
  664. <6>Freeing init memory: 176K
  665. [ 4.947668] Freeing init memory: 176K
  666. <30>systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
  667. [ 5.733615] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
  668.  
  669. Welcome to Arch Linux ARM!
  670.  
  671. <30>systemd[1]: Set hostname to <alarm>.
  672. [ 5.782202] systemd[1]: Set hostname to <alarm>.
  673. <28>systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
  674. [ 6.101684] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
  675. <30>systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
  676. [ 6.124384] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
  677. <30>systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  678. [ 6.139144] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  679. <30>systemd[1]: Expecting device dev-ttyS0.device...
  680. [ 6.151541] systemd[1]: Expecting device dev-ttyS0.device...
  681. Expecting device dev-ttyS0.device...
  682. <30>systemd[1]: Starting Remote File Systems.
  683. [ 6.176190] systemd[1]: Starting Remote File Systems.
  684. [ OK ] Reached target Remote File Systems.
  685. <30>systemd[1]: Reached target Remote File Systems.
  686. [ 6.206648] systemd[1]: Reached target Remote File Systems.
  687. <30>systemd[1]: Expecting device sys-subsystem-net-devices-eth0.device...
  688. [ 6.218838] systemd[1]: Expecting device sys-subsystem-net-devices-eth0.device...
  689. Expecting device sys-subsystem-net-devices-eth0.device...
  690. <30>systemd[1]: Starting Device-mapper event daemon FIFOs.
  691. [ 6.247260] systemd[1]: Starting Device-mapper event daemon FIFOs.
  692. [ OK ] Listening on Device-mapper event daemon FIFOs.
  693. <30>systemd[1]: Listening on Device-mapper event daemon FIFOs.
  694. [ 6.277598] systemd[1]: Listening on Device-mapper event daemon FIFOs.
  695. <30>systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
  696. [ 6.289867] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
  697. [ OK ] Listening on /dev/initctl Compatibility Named Pipe.
  698. <30>systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  699. [ 6.318027] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  700. <30>systemd[1]: Starting Root Slice.
  701. [ 6.328384] systemd[1]: Starting Root Slice.
  702. [ OK ] Created slice Root Slice.
  703. <30>systemd[1]: Created slice Root Slice.
  704. [ 6.355787] systemd[1]: Created slice Root Slice.
  705. <30>systemd[1]: Starting User and Session Slice.
  706. [ 6.364916] systemd[1]: Starting User and Session Slice.
  707. [ OK ] Created slice User and Session Slice.
  708. <30>systemd[1]: Created slice User and Session Slice.
  709. [ 6.381871] systemd[1]: Created slice User and Session Slice.
  710. <30>systemd[1]: Starting System Slice.
  711. [ 6.391217] systemd[1]: Starting System Slice.
  712. [ OK ] Created slice System Slice.
  713. <30>systemd[1]: Created slice System Slice.
  714. [ 6.415956] systemd[1]: Created slice System Slice.
  715. <30>systemd[1]: Starting system-netctl\x2difplugd.slice.
  716. [ 6.425946] systemd[1]: Starting system-netctl\x2difplugd.slice.
  717. [ OK ] Created slice system-netctl\x2difplugd.slice.
  718. <30>systemd[1]: Created slice system-netctl\x2difplugd.slice.
  719. [ 6.457520] systemd[1]: Created slice system-netctl\x2difplugd.slice.
  720. <30>systemd[1]: Starting system-getty.slice.
  721. [ 6.468056] systemd[1]: Starting system-getty.slice.
  722. [ OK ] Created slice system-getty.slice.
  723. <30>systemd[1]: Created slice system-getty.slice.
  724. [ 6.496465] systemd[1]: Created slice system-getty.slice.
  725. <30>systemd[1]: Starting system-serial\x2dgetty.slice.
  726. [ 6.506826] systemd[1]: Starting system-serial\x2dgetty.slice.
  727. [ OK ] Created slice system-serial\x2dgetty.slice.
  728. <30>systemd[1]: Created slice system-serial\x2dgetty.slice.
  729. [ 6.537338] systemd[1]: Created slice system-serial\x2dgetty.slice.
  730. <30>systemd[1]: Starting Slices.
  731. [ 6.546669] systemd[1]: Starting Slices.
  732. [ OK ] Reached target Slices.
  733. <30>systemd[1]: Reached target Slices.
  734. [ 6.575505] systemd[1]: Reached target Slices.
  735. <30>systemd[1]: Starting Delayed Shutdown Socket.
  736. [ 6.584444] systemd[1]: Starting Delayed Shutdown Socket.
  737. [ OK ] Listening on Delayed Shutdown Socket.
  738. <30>systemd[1]: Listening on Delayed Shutdown Socket.
  739. [ 6.616819] systemd[1]: Listening on Delayed Shutdown Socket.
  740. <30>systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
  741. [ 6.630530] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
  742. [ OK ] Set up automount Arbitrary Executable File Formats F...utomount Point.
  743. <30>systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  744. [ 6.670469] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  745. <30>systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
  746. [ 6.692057] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
  747. <30>systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  748. [ 6.707327] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  749. <30>systemd[1]: Starting Paths.
  750. [ 6.718209] systemd[1]: Starting Paths.
  751. [ OK ] Reached target Paths.
  752. <30>systemd[1]: Reached target Paths.
  753. [ 6.745427] systemd[1]: Reached target Paths.
  754. <30>systemd[1]: Starting LVM2 metadata daemon socket.
  755. [ 6.754636] systemd[1]: Starting LVM2 metadata daemon socket.
  756. [ OK ] Listening on LVM2 metadata daemon socket.
  757. <30>systemd[1]: Listening on LVM2 metadata daemon socket.
  758. [ 6.787171] systemd[1]: Listening on LVM2 metadata daemon socket.
  759. <30>systemd[1]: Starting Journal Socket.
  760. [ 6.797032] systemd[1]: Starting Journal Socket.
  761. [ OK ] Listening on Journal Socket.
  762. <30>systemd[1]: Listening on Journal Socket.
  763. [ 6.826042] systemd[1]: Listening on Journal Socket.
  764. <30>systemd[1]: Mounting Debug File System...
  765. [ 6.835248] systemd[1]: Mounting Debug File System...
  766. Mounting Debug File System...
  767. <30>systemd[1]: Starting Create list of required static device nodes for the current kernel...
  768. [ 6.943351] systemd[1]: Starting Create list of required static device nodes for the current kernel...
  769. Starting Create list of required static device nodes...rrent kernel...
  770. <30>systemd[1]: Started Set Up Additional Binary Formats.
  771. [ 7.061266] systemd[1]: Started Set Up Additional Binary Formats.
  772. <30>systemd[1]: Mounting POSIX Message Queue File System...
  773. [ 7.072956] systemd[1]: Mounting POSIX Message Queue File System...
  774. Mounting POSIX Message Queue File System...
  775. <30>systemd[1]: Started Load Kernel Modules.
  776. [ 7.180479] systemd[1]: Started Load Kernel Modules.
  777. <30>systemd[1]: Starting Journal Service...
  778. [ 7.189556] systemd[1]: Starting Journal Service...
  779. Starting Journal Service...
  780. [ OK ] Started Journal Service.
  781. <30>systemd[1]: Started Journal Service.
  782. [ 7.295919] systemd[1]: Started Journal Service.
  783. Starting Setup Virtual Console...
  784. <46>systemd-journald[59]: Vacuuming done, freed 0 bytes
  785. [ 7.369171] systemd-journald[59]: Vacuuming done, freed 0 bytes
  786. Starting Apply Kernel Variables...
  787. [ OK ] Listening on udev Kernel Socket.
  788. [ OK ] Listening on udev Control Socket.
  789. Starting udev Coldplug all Devices...
  790. [ OK ] Reached target Encrypted Volumes.
  791. [ OK ] Reached target Swap.
  792. Starting Remount Root and Kernel File Systems...
  793. Mounting Temporary Directory...
  794. [ OK ] Mounted Debug File System.
  795. [ OK ] Mounted POSIX Message Queue File System.
  796. [ OK ] Started Setup Virtual Console.
  797. [ OK ] Started Apply Kernel Variables.
  798. [ OK ] Started Remount Root and Kernel File Systems.
  799. [ OK ] Mounted Temporary Directory.
  800. [ OK ] Started Create list of required static device nodes ...current kernel.
  801. [ OK ] Started udev Coldplug all Devices.
  802. Starting Create static device nodes in /dev...
  803. Starting Load/Save Random Seed...
  804. [ OK ] Started Create static device nodes in /dev.
  805. [ OK ] Started Load/Save Random Seed.
  806. Starting udev Kernel Device Manager...
  807. [ OK ] Reached target Local File Systems (Pre).
  808. <30>systemd-udevd[72]: starting version 208
  809. [ 8.625737] systemd-udevd[72]: starting version 208
  810. [ OK ] Reached target Local File Systems.
  811. Starting Recreate Volatile Files and Directories...
  812. Starting Trigger Flushing of Journal to Persistent Storage...
  813. [ OK ] Started udev Kernel Device Manager.
  814. [ OK ] Started Recreate Volatile Files and Directories.
  815. Starting Update UTMP about System Reboot/Shutdown...
  816. [ OK ] Reached target Sound Card.
  817. [ OK ] Found device /dev/ttyS0.
  818. [ OK ] Found device /sys/subsystem/net/devices/eth0.
  819. <46>systemd-journald[59]: Received request to flush runtime journal from PID 1
  820. [ 9.201315] systemd-journald[59]: Received request to flush runtime journal from PID 1
  821. [ OK ] Started Trigger Flushing of Journal to Persistent Storage.
  822. [ OK ] Started Update UTMP about System Reboot/Shutdown.
  823. [ OK ] Reached target System Initialization.
  824. [ OK ] Listening on D-Bus System Message Bus Socket.
  825. [ OK ] Reached target Sockets.
  826. [ OK ] Reached target Timers.
  827. [ OK ] Reached target Basic System.
  828. Starting Entropy Harvesting Daemon...
  829. Starting Automatic wired network connection using netctl profiles...
  830. [ OK ] Started Automatic wired network connection using netctl profiles.
  831. Starting OpenSSH Daemon...
  832. [ OK ] Started OpenSSH Daemon.
  833. Starting Login Service...
  834. Starting D-Bus System Message Bus...
  835. [ OK ] Started D-Bus System Message Bus.
  836. Starting Permit User Sessions...
  837. [ OK ] Started Entropy Harvesting Daemon.
  838. [ OK ] Started Permit User Sessions.
  839. Starting Getty on tty1...
  840. [ OK ] Started Getty on tty1.
  841. Starting Serial Getty on ttyS0...
  842. [ OK ] Started Serial Getty on ttyS0.
  843. [ OK ] Reached target Login Prompts.
  844. [ OK ] Started Login Service.
  845. [ OK ] Reached target Multi-User System.
  846. [ OK ] Reached target Graphical Interface.
  847.  
  848. Arch Linux 3.4.79-1-ARCH (ttyS0)
  849.  
  850. alarm login: <6>sunxi_emac sunxi_emac.0: eth0: link down
  851. [ 14.646000] sunxi_emac sunxi_emac.0: eth0: link down
  852. <6>ADDRCONF(NETDEV_UP): eth0: link is not ready
  853. [ 14.656279] ADDRCONF(NETDEV_UP): eth0: link is not ready
  854.  
  855. Arch Linux 3.4.79-1-ARCH (ttyS0)
  856.  
  857. alarm login: root
  858. Password:
  859. Last login: Thu Dec 31 17:00:16 on ttyS0
  860. [root@alarm ~]# rmmod sunxi_emac
  861. rmmod: ERROR: Module sunxi_emac is builtin.
  862. [root@alarm ~]# ifconfig -a
  863. eth0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
  864. ether 02:0d:08:40:cb:d8 txqueuelen 1000 (Ethernet)
  865. RX packets 0 bytes 0 (0.0 B)
  866. RX errors 0 dropped 0 overruns 0 frame 0
  867. TX packets 0 bytes 0 (0.0 B)
  868. TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
  869. device interrupt 87
  870.  
  871. lo: flags=73<UP,LOOPBACK,RUNNING> mtu 16436
  872. inet 127.0.0.1 netmask 255.0.0.0
  873. inet6 ::1 prefixlen 128 scopeid 0x10<host>
  874. loop txqueuelen 0 (Local Loopback)
  875. RX packets 0 bytes 0 (0.0 B)
  876. RX errors 0 dropped 0 overruns 0 frame 0
  877. TX packets 0 bytes 0 (0.0 B)
  878. TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
  879.  
  880. [root@alarm ~]# modprobe sunxi_gmac
  881. <4>emac_init fetch emac using configuration failed
  882. [ 36.927222] emac_init fetch emac using configuration failed
  883. <6>gmac driver is disabled
  884. [ 36.935289] gmac driver is disabled
  885. [root@alarm ~]#
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!