API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Jan 20th, 2011
707
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 32.92 KB | None | 0 0
raw download clone embed print report
  1. [ 0.193019] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
  2. [ 0.193026] pci 0000:00:1c.0: PME# disabled
  3. [ 0.193105] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
  4. [ 0.193112] pci 0000:00:1c.1: PME# disabled
  5. [ 0.193191] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
  6. [ 0.193198] pci 0000:00:1c.2: PME# disabled
  7. [ 0.193276] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
  8. [ 0.193283] pci 0000:00:1c.3: PME# disabled
  9. [ 0.193343] pci 0000:00:1d.0: reg 20 io port: [0xd880-0xd89f]
  10. [ 0.193404] pci 0000:00:1d.1: reg 20 io port: [0xd800-0xd81f]
  11. [ 0.193464] pci 0000:00:1d.2: reg 20 io port: [0xd480-0xd49f]
  12. [ 0.193523] pci 0000:00:1d.3: reg 20 io port: [0xd400-0xd41f]
  13. [ 0.193590] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe937c00-0xfe937fff]
  14. [ 0.193648] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
  15. [ 0.193656] pci 0000:00:1d.7: PME# disabled
  16. [ 0.193800] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
  17. [ 0.193808] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
  18. [ 0.193818] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 4700 (mask 00ff)
  19. [ 0.193870] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
  20. [ 0.193881] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
  21. [ 0.193892] pci 0000:00:1f.1: reg 18 io port: [0x8f0-0x8f7]
  22. [ 0.193903] pci 0000:00:1f.1: reg 1c io port: [0x8f8-0x8fb]
  23. [ 0.193913] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
  24. [ 0.193971] pci 0000:00:1f.2: reg 10 io port: [0xd080-0xd087]
  25. [ 0.193981] pci 0000:00:1f.2: reg 14 io port: [0xd000-0xd003]
  26. [ 0.193991] pci 0000:00:1f.2: reg 18 io port: [0xcc00-0xcc07]
  27. [ 0.194002] pci 0000:00:1f.2: reg 1c io port: [0xc880-0xc883]
  28. [ 0.194012] pci 0000:00:1f.2: reg 20 io port: [0xc800-0xc80f]
  29. [ 0.194042] pci 0000:00:1f.2: PME# supported from D3hot
  30. [ 0.194049] pci 0000:00:1f.2: PME# disabled
  31. [ 0.194104] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
  32. [ 0.194191] pci 0000:01:00.0: reg 10 io port: [0xe800-0xe8ff]
  33. [ 0.194217] pci 0000:01:00.0: reg 18 64bit mmio: [0xfeaff000-0xfeafffff]
  34. [ 0.194237] pci 0000:01:00.0: reg 20 64bit mmio pref: [0xfdff0000-0xfdffffff]
  35. [ 0.194250] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfeac0000-0xfeadffff]
  36. [ 0.194297] pci 0000:01:00.0: supports D1 D2
  37. [ 0.194303] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
  38. [ 0.194311] pci 0000:01:00.0: PME# disabled
  39. [ 0.200102] pci 0000:00:1c.0: bridge io port: [0xe000-0xefff]
  40. [ 0.200110] pci 0000:00:1c.0: bridge 32bit mmio: [0xfea00000-0xfeafffff]
  41. [ 0.200121] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xfdf00000-0xfdffffff]
  42. [ 0.200190] pci 0000:02:00.0: reg 10 64bit mmio: [0xfebf0000-0xfebfffff]
  43. [ 0.200304] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
  44. [ 0.200382] pci 0000:00:1c.1: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
  45. [ 0.200542] pci 0000:00:1e.0: transparent bridge
  46. [ 0.200578] pci_bus 0000:00: on NUMA node 0
  47. [ 0.200591] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  48. [ 0.200910] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
  49. [ 0.201018] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
  50. [ 0.201124] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
  51. [ 0.201228] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
  52. [ 0.209840] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
  53. [ 0.210028] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
  54. [ 0.210214] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 *12 14 15)
  55. [ 0.210395] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
  56. [ 0.210576] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
  57. [ 0.210761] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
  58. [ 0.210947] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
  59. [ 0.211135] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
  60. [ 0.211337] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
  61. [ 0.211359] vgaarb: loaded
  62. [ 0.211402] PCI: Using ACPI for IRQ routing
  63. [ 0.211402] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
  64. [ 0.211402] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
  65. [ 0.216029] Switching to clocksource tsc
  66. [ 0.218236] pnp: PnP ACPI init
  67. [ 0.218273] ACPI: bus type pnp registered
  68. [ 0.222310] pnp: PnP ACPI: found 13 devices
  69. [ 0.222316] ACPI: ACPI bus type pnp unregistered
  70. [ 0.222325] PnPBIOS: Disabled by ACPI PNP
  71. [ 0.222350] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
  72. [ 0.222368] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
  73. [ 0.222376] system 00:06: ioport range 0x800-0x87f has been reserved
  74. [ 0.222383] system 00:06: ioport range 0x480-0x4bf has been reserved
  75. [ 0.222391] system 00:06: iomem range 0xfed1c000-0xfed1ffff has been reserved
  76. [ 0.222399] system 00:06: iomem range 0xfed20000-0xfed3ffff has been reserved
  77. [ 0.222407] system 00:06: iomem range 0xfed45000-0xfed89fff has been reserved
  78. [ 0.222415] system 00:06: iomem range 0xfed40000-0xfed44fff has been reserved
  79. [ 0.222429] system 00:09: iomem range 0xffc00000-0xffefffff has been reserved
  80. [ 0.222442] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
  81. [ 0.222450] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
  82. [ 0.222462] system 00:0b: iomem range 0xf0000000-0xf3ffffff has been reserved
  83. [ 0.222475] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
  84. [ 0.222483] system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
  85. [ 0.222490] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
  86. [ 0.222498] system 00:0c: iomem range 0x100000-0x7f7fffff could not be reserved
  87. [ 0.257580] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
  88. [ 0.257589] pci 0000:00:1c.0: IO window: 0xe000-0xefff
  89. [ 0.257598] pci 0000:00:1c.0: MEM window: 0xfea00000-0xfeafffff
  90. [ 0.257607] pci 0000:00:1c.0: PREFETCH window: 0x000000fdf00000-0x000000fdffffff
  91. [ 0.257617] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
  92. [ 0.257624] pci 0000:00:1c.1: IO window: 0x1000-0x1fff
  93. [ 0.257633] pci 0000:00:1c.1: MEM window: 0xfeb00000-0xfebfffff
  94. [ 0.257641] pci 0000:00:1c.1: PREFETCH window: 0x00000080000000-0x000000801fffff
  95. [ 0.257651] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03
  96. [ 0.257658] pci 0000:00:1c.2: IO window: 0x2000-0x2fff
  97. [ 0.257666] pci 0000:00:1c.2: MEM window: 0x80200000-0x803fffff
  98. [ 0.257674] pci 0000:00:1c.2: PREFETCH window: 0x00000080400000-0x000000805fffff
  99. [ 0.257685] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:04
  100. [ 0.257691] pci 0000:00:1c.3: IO window: 0x3000-0x3fff
  101. [ 0.257700] pci 0000:00:1c.3: MEM window: 0x80600000-0x807fffff
  102. [ 0.257708] pci 0000:00:1c.3: PREFETCH window: 0x00000080800000-0x000000809fffff
  103. [ 0.257718] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
  104. [ 0.257723] pci 0000:00:1e.0: IO window: disabled
  105. [ 0.257730] pci 0000:00:1e.0: MEM window: disabled
  106. [ 0.257737] pci 0000:00:1e.0: PREFETCH window: disabled
  107. [ 0.257769] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  108. [ 0.257778] pci 0000:00:1c.0: setting latency timer to 64
  109. [ 0.257791] pci 0000:00:1c.1: enabling device (0106 -> 0107)
  110. [ 0.257803] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
  111. [ 0.257811] pci 0000:00:1c.1: setting latency timer to 64
  112. [ 0.257824] pci 0000:00:1c.2: enabling device (0104 -> 0107)
  113. [ 0.257834] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  114. [ 0.257842] pci 0000:00:1c.2: setting latency timer to 64
  115. [ 0.257854] pci 0000:00:1c.3: enabling device (0104 -> 0107)
  116. [ 0.257866] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
  117. [ 0.257873] pci 0000:00:1c.3: setting latency timer to 64
  118. [ 0.257884] pci 0000:00:1e.0: setting latency timer to 64
  119. [ 0.257894] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
  120. [ 0.257900] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
  121. [ 0.257907] pci_bus 0000:01: resource 0 io: [0xe000-0xefff]
  122. [ 0.257914] pci_bus 0000:01: resource 1 mem: [0xfea00000-0xfeafffff]
  123. [ 0.257920] pci_bus 0000:01: resource 2 pref mem [0xfdf00000-0xfdffffff]
  124. [ 0.257927] pci_bus 0000:02: resource 0 io: [0x1000-0x1fff]
  125. [ 0.257934] pci_bus 0000:02: resource 1 mem: [0xfeb00000-0xfebfffff]
  126. [ 0.257940] pci_bus 0000:02: resource 2 pref mem [0x80000000-0x801fffff]
  127. [ 0.257947] pci_bus 0000:03: resource 0 io: [0x2000-0x2fff]
  128. [ 0.257953] pci_bus 0000:03: resource 1 mem: [0x80200000-0x803fffff]
  129. [ 0.257960] pci_bus 0000:03: resource 2 pref mem [0x80400000-0x805fffff]
  130. [ 0.257967] pci_bus 0000:04: resource 0 io: [0x3000-0x3fff]
  131. [ 0.257973] pci_bus 0000:04: resource 1 mem: [0x80600000-0x807fffff]
  132. [ 0.257980] pci_bus 0000:04: resource 2 pref mem [0x80800000-0x809fffff]
  133. [ 0.257986] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
  134. [ 0.257993] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffff]
  135. [ 0.258062] NET: Registered protocol family 2
  136. [ 0.258255] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  137. [ 0.258896] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  138. [ 0.259948] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  139. [ 0.260425] TCP: Hash tables configured (established 131072 bind 65536)
  140. [ 0.260432] TCP reno registered
  141. [ 0.260676] NET: Registered protocol family 1
  142. [ 0.260722] pci 0000:00:02.0: Boot video device
  143. [ 0.260950] Unpacking initramfs...
  144. [ 0.666133] Freeing initrd memory: 8322k freed
  145. [ 0.675119] audit: initializing netlink socket (disabled)
  146. [ 0.675147] type=2000 audit(1295543554.671:1): initialized
  147. [ 0.681115] highmem bounce pool size: 64 pages
  148. [ 0.681126] HugeTLB registered 4 MB page size, pre-allocated 0 pages
  149. [ 0.684382] VFS: Disk quotas dquot_6.5.2
  150. [ 0.684508] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  151. [ 0.684671] msgmni has been set to 1721
  152. [ 0.685095] alg: No test for stdrng (krng)
  153. [ 0.685219] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  154. [ 0.685226] io scheduler noop registered
  155. [ 0.685230] io scheduler anticipatory registered
  156. [ 0.685235] io scheduler deadline registered
  157. [ 0.685326] io scheduler cfq registered (default)
  158. [ 0.685535] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
  159. [ 0.685549] pcieport 0000:00:1c.0: setting latency timer to 64
  160. [ 0.685735] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
  161. [ 0.685747] pcieport 0000:00:1c.1: setting latency timer to 64
  162. [ 0.685921] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
  163. [ 0.685934] pcieport 0000:00:1c.2: setting latency timer to 64
  164. [ 0.686120] pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X
  165. [ 0.686132] pcieport 0000:00:1c.3: setting latency timer to 64
  166. [ 0.686461] isapnp: Scanning for PnP cards...
  167. [ 1.039609] isapnp: No Plug & Play device found
  168. [ 1.043021] Linux agpgart interface v0.103
  169. [ 1.043172] agpgart-intel 0000:00:00.0: Intel 945G Chipset
  170. [ 1.043370] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
  171. [ 1.046056] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
  172. [ 1.046205] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  173. [ 1.046940] PNP: No PS/2 controller found. Probing ports directly.
  174. [ 1.320401] serio: i8042 KBD port at 0x60,0x64 irq 1
  175. [ 1.320557] mice: PS/2 mouse device common for all mice
  176. [ 1.321507] rtc_cmos 00:03: RTC can wake from S4
  177. [ 1.321598] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
  178. [ 1.321633] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
  179. [ 1.321660] cpuidle: using governor ladder
  180. [ 1.321664] cpuidle: using governor menu
  181. [ 1.321674] No iBFT detected.
  182. [ 1.322500] TCP cubic registered
  183. [ 1.322823] NET: Registered protocol family 10
  184. [ 1.323823] lo: Disabled Privacy Extensions
  185. [ 1.324564] Mobile IPv6
  186. [ 1.324571] NET: Registered protocol family 17
  187. [ 1.324606] Using IPI No-Shortcut mode
  188. [ 1.324788] PM: Resume from disk failed.
  189. [ 1.324818] registered taskstats version 1
  190. [ 1.325353] rtc_cmos 00:03: setting system clock to 2011-01-20 17:12:35 UTC (1295543555)
  191. [ 1.325421] Initalizing network drop monitor service
  192. [ 1.325482] Freeing unused kernel memory: 376k freed
  193. [ 1.325765] Write protecting the kernel text: 2504k
  194. [ 1.325807] Write protecting the kernel read-only data: 920k
  195. [ 1.361214] udev[56]: starting version 164
  196. [ 1.652242] usbcore: registered new interface driver usbfs
  197. [ 1.652306] usbcore: registered new interface driver hub
  198. [ 1.653618] usbcore: registered new device driver usb
  199. [ 1.665310] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  200. [ 1.665389] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
  201. [ 1.665432] ehci_hcd 0000:00:1d.7: setting latency timer to 64
  202. [ 1.665442] ehci_hcd 0000:00:1d.7: EHCI Host Controller
  203. [ 1.665564] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
  204. [ 1.665611] ehci_hcd 0000:00:1d.7: using broken periodic workaround
  205. [ 1.665630] ehci_hcd 0000:00:1d.7: debug port 1
  206. [ 1.669528] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
  207. [ 1.669583] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe937c00
  208. [ 1.677482] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
  209. [ 1.677523] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  210. [ 1.677584] r8169 0000:01:00.0: setting latency timer to 64
  211. [ 1.677663] r8169 0000:01:00.0: irq 28 for MSI/MSI-X
  212. [ 1.679737] eth0: RTL8168c/8111c at 0xf7dd8000, 00:21:85:9c:56:ff, XID 1c4000c0 IRQ 28
  213. [ 1.688898] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
  214. [ 1.688976] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  215. [ 1.688985] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  216. [ 1.688994] usb usb1: Product: EHCI Host Controller
  217. [ 1.689001] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
  218. [ 1.689008] usb usb1: SerialNumber: 0000:00:1d.7
  219. [ 1.689404] usb usb1: configuration #1 chosen from 1 choice
  220. [ 1.689615] hub 1-0:1.0: USB hub found
  221. [ 1.689641] hub 1-0:1.0: 8 ports detected
  222. [ 1.739268] SCSI subsystem initialized
  223. [ 1.812690] libata version 3.00 loaded.
  224. [ 1.824897] uhci_hcd: USB Universal Host Controller Interface driver
  225. [ 1.825006] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
  226. [ 1.825026] uhci_hcd 0000:00:1d.0: setting latency timer to 64
  227. [ 1.825036] uhci_hcd 0000:00:1d.0: UHCI Host Controller
  228. [ 1.825069] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
  229. [ 1.825117] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d880
  230. [ 1.825223] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  231. [ 1.825233] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  232. [ 1.825241] usb usb2: Product: UHCI Host Controller
  233. [ 1.825248] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
  234. [ 1.825255] usb usb2: SerialNumber: 0000:00:1d.0
  235. [ 1.825637] usb usb2: configuration #1 chosen from 1 choice
  236. [ 1.825848] hub 2-0:1.0: USB hub found
  237. [ 1.825876] hub 2-0:1.0: 2 ports detected
  238. [ 1.826015] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
  239. [ 1.826032] uhci_hcd 0000:00:1d.1: setting latency timer to 64
  240. [ 1.826042] uhci_hcd 0000:00:1d.1: UHCI Host Controller
  241. [ 1.826072] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
  242. [ 1.826134] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d800
  243. [ 1.826230] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
  244. [ 1.826239] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  245. [ 1.826248] usb usb3: Product: UHCI Host Controller
  246. [ 1.826255] usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
  247. [ 1.826262] usb usb3: SerialNumber: 0000:00:1d.1
  248. [ 1.826616] usb usb3: configuration #1 chosen from 1 choice
  249. [ 1.826824] hub 3-0:1.0: USB hub found
  250. [ 1.826852] hub 3-0:1.0: 2 ports detected
  251. [ 1.826990] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  252. [ 1.827009] uhci_hcd 0000:00:1d.2: setting latency timer to 64
  253. [ 1.827018] uhci_hcd 0000:00:1d.2: UHCI Host Controller
  254. [ 1.827045] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
  255. [ 1.827103] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d480
  256. [ 1.827198] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
  257. [ 1.827208] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  258. [ 1.827216] usb usb4: Product: UHCI Host Controller
  259. [ 1.827223] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
  260. [ 1.827230] usb usb4: SerialNumber: 0000:00:1d.2
  261. [ 1.827617] usb usb4: configuration #1 chosen from 1 choice
  262. [ 1.827828] hub 4-0:1.0: USB hub found
  263. [ 1.827854] hub 4-0:1.0: 2 ports detected
  264. [ 1.827991] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
  265. [ 1.828011] uhci_hcd 0000:00:1d.3: setting latency timer to 64
  266. [ 1.828021] uhci_hcd 0000:00:1d.3: UHCI Host Controller
  267. [ 1.828048] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
  268. [ 1.828108] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d400
  269. [ 1.828208] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
  270. [ 1.828218] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  271. [ 1.828226] usb usb5: Product: UHCI Host Controller
  272. [ 1.828233] usb usb5: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
  273. [ 1.828241] usb usb5: SerialNumber: 0000:00:1d.3
  274. [ 1.828634] usb usb5: configuration #1 chosen from 1 choice
  275. [ 1.828854] hub 5-0:1.0: USB hub found
  276. [ 1.828880] hub 5-0:1.0: 2 ports detected
  277. [ 1.841613] ata_piix 0000:00:1f.1: version 2.13
  278. [ 1.841649] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  279. [ 1.841736] ata_piix 0000:00:1f.1: setting latency timer to 64
  280. [ 1.845767] scsi0 : ata_piix
  281. [ 1.850245] scsi1 : ata_piix
  282. [ 1.854390] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
  283. [ 1.854402] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
  284. [ 1.854493] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
  285. [ 1.854506] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
  286. [ 1.854600] ata_piix 0000:00:1f.2: setting latency timer to 64
  287. [ 1.854999] scsi2 : ata_piix
  288. [ 1.855251] scsi3 : ata_piix
  289. [ 1.859343] ata3: SATA max UDMA/133 cmd 0xd080 ctl 0xd000 bmdma 0xc800 irq 19
  290. [ 1.859352] ata4: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc808 irq 19
  291. [ 2.019214] ata4.01: NODEV after polling detection
  292. [ 2.024458] ata4.00: ATAPI: ATAPI iHAS120 6, 7L0F, max UDMA/100
  293. [ 2.040273] ata4.00: configured for UDMA/100
  294. [ 2.041859] ata3.00: ATA-8: WDC WD1600AAJS-22WAA0, 58.01D58, max UDMA/133
  295. [ 2.041867] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
  296. [ 2.056033] usb 1-2: new high speed USB device using ehci_hcd and address 3
  297. [ 2.057053] ata3.00: configured for UDMA/133
  298. [ 2.057283] scsi 2:0:0:0: Direct-Access ATA WDC WD1600AAJS-2 58.0 PQ: 0 ANSI: 5
  299. [ 2.058795] scsi 3:0:0:0: CD-ROM ATAPI iHAS120 6 7L0F PQ: 0 ANSI: 5
  300. [ 2.091369] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
  301. [ 2.091380] Uniform CD-ROM driver Revision: 3.20
  302. [ 2.092040] sr 3:0:0:0: Attached scsi CD-ROM sr0
  303. [ 2.100413] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
  304. [ 2.100642] sd 2:0:0:0: [sda] Write Protect is off
  305. [ 2.100652] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
  306. [ 2.100746] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  307. [ 2.101299] sda: sda1 sda2 sda3 <
  308. [ 2.113395] sd 2:0:0:0: Attached scsi generic sg0 type 0
  309. [ 2.113527] sr 3:0:0:0: Attached scsi generic sg1 type 5
  310. [ 2.122419] sda5 sda6 >
  311. [ 2.134859] sd 2:0:0:0: [sda] Attached SCSI disk
  312. [ 2.198593] usb 1-2: New USB device found, idVendor=0bc2, idProduct=2100
  313. [ 2.198604] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  314. [ 2.198611] usb 1-2: Product: FreeAgent Go
  315. [ 2.198615] usb 1-2: Manufacturer: Seagate
  316. [ 2.198620] usb 1-2: SerialNumber: 2GE13GP9
  317. [ 2.198852] usb 1-2: configuration #1 chosen from 1 choice
  318. [ 2.230526] Initializing USB Mass Storage driver...
  319. [ 2.230820] scsi4 : SCSI emulation for USB Mass Storage devices
  320. [ 2.231096] usbcore: registered new interface driver usb-storage
  321. [ 2.231108] USB Mass Storage support registered.
  322. [ 2.231423] usb-storage: device found at 3
  323. [ 2.231430] usb-storage: waiting for device to settle before scanning
  324. [ 2.372052] usb 1-4: new high speed USB device using ehci_hcd and address 5
  325. [ 2.505478] usb 1-4: New USB device found, idVendor=05e3, idProduct=0606
  326. [ 2.505490] usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  327. [ 2.505499] usb 1-4: Product: USB2.0 Hub
  328. [ 2.505737] usb 1-4: configuration #1 chosen from 1 choice
  329. [ 2.506621] hub 1-4:1.0: USB hub found
  330. [ 2.506987] hub 1-4:1.0: 4 ports detected
  331. [ 2.732534] usb 1-6: new high speed USB device using ehci_hcd and address 7
  332. [ 2.751184] PM: Starting manual resume from disk
  333. [ 2.751192] PM: Resume from partition 8:5
  334. [ 2.751196] PM: Checking hibernation image.
  335. [ 2.751457] PM: Error -22 checking image file
  336. [ 2.751462] PM: Resume from disk failed.
  337. [ 2.862344] EXT4-fs (sda6): mounted filesystem with ordered data mode
  338. [ 2.879638] usb 1-6: New USB device found, idVendor=0bda, idProduct=0158
  339. [ 2.879650] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  340. [ 2.879659] usb 1-6: Product: USB2.0-CRW
  341. [ 2.879665] usb 1-6: Manufacturer: Generic
  342. [ 2.879671] usb 1-6: SerialNumber: 20071114173400000
  343. [ 2.879957] usb 1-6: configuration #1 chosen from 1 choice
  344. [ 2.885380] scsi5 : SCSI emulation for USB Mass Storage devices
  345. [ 2.885812] usb-storage: device found at 7
  346. [ 2.885819] usb-storage: waiting for device to settle before scanning
  347. [ 2.996568] usb 2-1: new low speed USB device using uhci_hcd and address 2
  348. [ 3.172325] usb 2-1: New USB device found, idVendor=046d, idProduct=c315
  349. [ 3.172338] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  350. [ 3.172347] usb 2-1: Product: Logitech USB Keyboard
  351. [ 3.172354] usb 2-1: Manufacturer: Logitech
  352. [ 3.172559] usb 2-1: configuration #1 chosen from 1 choice
  353. [ 3.412028] usb 3-1: new low speed USB device using uhci_hcd and address 2
  354. [ 3.586365] usb 3-1: New USB device found, idVendor=093a, idProduct=2510
  355. [ 3.586374] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  356. [ 3.586381] usb 3-1: Product: USB OPTICAL MOUSE
  357. [ 3.586385] usb 3-1: Manufacturer: PIXART
  358. [ 3.586576] usb 3-1: configuration #1 chosen from 1 choice
  359. [ 3.836065] usb 4-1: new full speed USB device using uhci_hcd and address 2
  360. [ 3.993367] usb 4-1: New USB device found, idVendor=0d8c, idProduct=000c
  361. [ 3.993377] usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  362. [ 3.993384] usb 4-1: Product: C-Media USB Audio Device
  363. [ 3.993571] usb 4-1: configuration #1 chosen from 1 choice
  364. [ 4.068365] usb 1-4.2: new full speed USB device using ehci_hcd and address 8
  365. [ 4.163098] usb 1-4.2: New USB device found, idVendor=03f0, idProduct=7e04
  366. [ 4.163107] usb 1-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  367. [ 4.163114] usb 1-4.2: Product: Deskjet F4100 series
  368. [ 4.163118] usb 1-4.2: Manufacturer: HP
  369. [ 4.163123] usb 1-4.2: SerialNumber: CN79S4S5VV04TJ
  370. [ 4.163307] usb 1-4.2: configuration #1 chosen from 1 choice
  371. [ 4.236231] usb 1-4.3: new high speed USB device using ehci_hcd and address 9
  372. [ 4.392191] udev[313]: starting version 164
  373. [ 4.443747] usb 1-4.3: New USB device found, idVendor=046d, idProduct=0817
  374. [ 4.443756] usb 1-4.3: New USB device strings: Mfr=0, Product=0, SerialNumber=2
  375. [ 4.443763] usb 1-4.3: SerialNumber: 1A223D90
  376. [ 4.443961] usb 1-4.3: configuration #1 chosen from 1 choice
  377. [ 4.793642] Linux video capture interface: v2.00
  378. [ 4.836859] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0817)
  379. [ 4.850836] input: UVC Camera (046d:0817) as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.3/1-4.3:1.0/input/input0
  380. [ 4.850912] usbcore: registered new interface driver uvcvideo
  381. [ 4.850925] USB Video Class driver (v0.1.0)
  382. [ 4.951768] usbcore: registered new interface driver hiddev
  383. [ 4.966318] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input1
  384. [ 4.966497] generic-usb 0003:046D:C315.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:1d.0-1/input0
  385. [ 4.981305] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input2
  386. [ 4.981524] generic-usb 0003:093A:2510.0002: input,hidraw1: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1d.1-1/input0
  387. [ 4.985713] input: C-Media USB Audio Device as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.3/input/input3
  388. [ 4.985871] generic-usb 0003:0D8C:000C.0003: input,hidraw2: USB HID v1.00 Device [C-Media USB Audio Device ] on usb-0000:00:1d.2-1/input3
  389. [ 4.985948] usbcore: registered new interface driver usbhid
  390. [ 4.985960] usbhid: v2.6:USB HID core driver
  391. [ 5.406156] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
  392. [ 5.447453] input: PC Speaker as /devices/platform/pcspkr/input/input4
  393. [ 5.495697] processor LNXCPU:00: registered as cooling_device0
  394. [ 5.496039] processor LNXCPU:01: registered as cooling_device1
  395. [ 5.499696] intel_rng: FWH not detected
  396. [ 5.501782] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
  397. [ 5.502149] ACPI: Power Button [PWRB]
  398. [ 5.502368] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
  399. [ 5.502466] ACPI: Power Button [PWRF]
  400. [ 6.490711] cfg80211: Using static regulatory domain info
  401. [ 6.490720] cfg80211: Regulatory domain: US
  402. [ 6.490726] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  403. [ 6.490735] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
  404. [ 6.490744] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
  405. [ 6.490754] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
  406. [ 6.490763] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
  407. [ 6.490772] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
  408. [ 6.490781] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
  409. [ 6.490807] cfg80211: Calling CRDA for country: US
  410. [ 6.613238] [drm] Initialized drm 1.1.0 20060810
  411. [ 6.661116] usblp0: USB Bidirectional printer dev 8 if 1 alt 0 proto 2 vid 0x03F0 pid 0x7E04
  412. [ 6.661197] usbcore: registered new interface driver usblp
  413. [ 6.772926] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  414. [ 6.773005] HDA Intel 0000:00:1b.0: setting latency timer to 64
  415. [ 7.050593] ath5k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
  416. [ 7.050615] ath5k 0000:02:00.0: setting latency timer to 64
  417. [ 7.050727] ath5k 0000:02:00.0: registered as 'phy0'
  418. [ 7.229390] usb-storage: device scan complete
  419. [ 7.231006] scsi 4:0:0:0: Direct-Access Seagate FreeAgent Go 102C PQ: 0 ANSI: 4
  420. [ 7.233609] sd 4:0:0:0: Attached scsi generic sg2 type 0
  421. [ 7.235873] sd 4:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
  422. [ 7.237238] sd 4:0:0:0: [sdb] Write Protect is off
  423. [ 7.237248] sd 4:0:0:0: [sdb] Mode Sense: 1c 00 00 00
  424. [ 7.237255] sd 4:0:0:0: [sdb] Assuming drive cache: write through
  425. [ 7.240469] sd 4:0:0:0: [sdb] Assuming drive cache: write through
  426. [ 7.240544] sdb: sdb1
  427. [ 7.245472] sd 4:0:0:0: [sdb] Assuming drive cache: write through
  428. [ 7.245535] sd 4:0:0:0: [sdb] Attached SCSI disk
  429. [ 7.557386] ath: EEPROM regdomain: 0x60
  430. [ 7.557393] ath: EEPROM indicates we should expect a direct regpair map
  431. [ 7.557404] ath: Country alpha2 being used: 00
  432. [ 7.557410] ath: Regpair used: 0x60
  433. [ 7.677132] hda_codec: ALC888: BIOS auto-probing.
  434. [ 7.678809] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
  435. [ 7.682906] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  436. [ 7.682917] i915 0000:00:02.0: setting latency timer to 64
  437. [ 7.695251] usbcore: registered new interface driver snd-usb-audio
  438. [ 7.712168] [drm] set up 7M of stolen space
  439. [ 7.715587] [drm] initialized overlay support
  440. [ 7.737171] phy0: Selected rate control algorithm 'minstrel'
  441. [ 7.739387] Registered led device: ath5k-phy0::rx
  442. [ 7.739443] Registered led device: ath5k-phy0::tx
  443. [ 7.739454] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
  444. [ 7.890084] usb-storage: device scan complete
  445. [ 7.892208] scsi 5:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
  446. [ 7.894265] sd 5:0:0:0: Attached scsi generic sg3 type 0
  447. [ 7.897991] sd 5:0:0:0: [sdc] Attached SCSI removable disk
  448. [ 7.958500] Console: switching to colour frame buffer device 180x56
  449. [ 7.976903] fb0: inteldrmfb frame buffer device
  450. [ 7.976909] registered panic notifier
  451. [ 7.976927] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
  452. [ 8.770767] Adding 2107384k swap on /dev/sda5. Priority:-1 extents:1 across:2107384k
  453. [ 9.053499] ------------[ cut here ]------------
  454. [ 9.053521] WARNING: at /build/buildd-linux-2.6_2.6.32-30-i386-UYhWt7/linux-2.6-2.6.32/debian/build/source_i386_none/fs/fs-writeback.c:1122 __mark_inode_dirty+0xbe/0x10b()
  455. [ 9.053533] Hardware name: MS-7418
  456. [ 9.053538] Modules linked in: loop(+) arc4 ecb snd_hda_codec_realtek snd_usb_audio i915 ath5k mac80211 snd_hda_intel snd_usb_lib drm_kms_helper ath usblp snd_seq_midi snd_hda_codec drm cfg80211 snd_seq_midi_event snd_rawmidi i2c_algo_bit rfkill snd_pcm snd_hwdep video button processor pcspkr output led_class rng_core snd_page_alloc i2c_i801 snd_seq serio_raw snd_timer snd_seq_device evdev usbhid hid uvcvideo snd videodev v4l1_compat i2c_core soundcore ext4 mbcache jbd2 crc16 usb_storage sg sd_mod sr_mod crc_t10dif cdrom ata_generic ata_piix uhci_hcd thermal libata scsi_mod r8169 mii ehci_hcd thermal_sys usbcore nls_base [last unloaded: scsi_wait_scan]
  457. [ 9.053698] Pid: 835, comm: udisks-part-id Not tainted 2.6.32-5-686 #1
  458. [ 9.053705] Call Trace:
  459. [ 9.053721] [<c10303fd>] ? warn_slowpath_common+0x5e/0x8a
  460. [ 9.053734] [<c1030433>] ? warn_slowpath_null+0xa/0xc
  461. [ 9.053745] [<c10c8f7e>] ? __mark_inode_dirty+0xbe/0x10b
  462. [ 9.053757] [<c10c18c3>] ? touch_atime+0xbe/0xd9
  463. [ 9.053770] [<c1088aa4>] ? generic_file_aio_read+0x500/0x57f
  464. [ 9.053784] [<c101f4ed>] ? kunmap_atomic+0x51/0x6d
  465. [ 9.053798] [<c10b2e19>] ? do_sync_read+0xc0/0x107
  466. [ 9.053811] [<c1043cc6>] ? autoremove_wake_function+0x0/0x2d
  467. [ 9.053826] [<c126d37e>] ? mutex_lock+0xb/0x24
  468. [ 9.053839] [<c11021b4>] ? security_file_permission+0xc/0xd
  469. [ 9.053851] [<c10b2d59>] ? do_sync_read+0x0/0x107
  470. [ 9.053861] [<c10b37d0>] ? vfs_read+0x7b/0xd3
  471. [ 9.053872] [<c10b38c0>] ? sys_read+0x3c/0x63
  472. [ 9.053885] [<c10030fb>] ? sysenter_do_call+0x12/0x28
  473. [ 9.053894] ---[ end trace 18511bad934e58d7 ]---
  474. [ 9.053900] bdi-block not registered
  475. [ 9.066613] loop: module loaded
  476. [ 10.343269] fuse init (API version 7.13)
  477. [ 13.521903] r8169: eth0: link up
  478. [ 13.521914] r8169: eth0: link up
  479. [ 13.595667] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  480. [ 15.694465] Bluetooth: Core ver 2.15
  481. [ 15.694622] NET: Registered protocol family 31
  482. [ 15.694628] Bluetooth: HCI device and connection manager initialized
  483. [ 15.694637] Bluetooth: HCI socket layer initialized
  484. [ 15.758970] Bluetooth: L2CAP ver 2.14
  485. [ 15.758978] Bluetooth: L2CAP socket layer initialized
  486. [ 15.822648] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  487. [ 15.822657] Bluetooth: BNEP filters: protocol multicast
  488. [ 15.881984] Bridge firewalling registered
  489. [ 15.963064] Bluetooth: SCO (Voice Link) ver 0.6
  490. [ 15.963072] Bluetooth: SCO socket layer initialized
  491. [ 16.278648] lp: driver loaded but no devices found
  492. [ 16.340920] ppdev: user-space parallel port driver
  493. [ 18.355159] usb 1-4.2: usbfs: interface 1 claimed by usblp while 'usb' sets config #1
  494. [ 23.608022] eth0: no IPv6 routers present
  495. [ 25.703553] CPU0 attaching NULL sched-domain.
  496. [ 25.703567] CPU1 attaching NULL sched-domain.
  497. [ 25.724166] CPU0 attaching sched-domain:
  498. [ 25.724177] domain 0: span 0-1 level SIBLING
  499. [ 25.724186] groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
  500. [ 25.724202] domain 1: span 0-1 level MC
  501. [ 25.724210] groups: 0-1 (cpu_power = 1178)
  502. [ 25.724224] CPU1 attaching sched-domain:
  503. [ 25.724231] domain 0: span 0-1 level SIBLING
  504. [ 25.724238] groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
  505. [ 25.724254] domain 1: span 0-1 level MC
  506. [ 25.724261] groups: 0-1 (cpu_power = 1178)
  507. [ 106.507952] ath5k phy0: noise floor calibration timeout (2472MHz)
  508. [ 156.444714] ath5k phy0: noise floor calibration timeout (2472MHz)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!