API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Dec 8th, 2014
145
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 8.45 KB | None | 0 0
raw download clone embed print report
  1. smartctl 6.2 2013-07-26 r3841 [i686-linux-3.14.20] (local build)
  2. Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Device Model: ExcelStor Technology J680
  6. Serial Number: VNR21EG20LVFYA
  7. Firmware Version: V32OA60A
  8. User Capacity: 82,348,277,760 bytes [82.3 GB]
  9. Sector Size: 512 bytes logical/physical
  10. Device is: In smartctl database [for details use: -P show]
  11. ATA Version is: ATA/ATAPI-6 T13/1410D revision 3a
  12. Local Time is: Mon Dec 8 17:36:55 2014 CET
  13. SMART support is: Available - device has SMART capability.
  14. SMART support is: Enabled
  15.  
  16. === START OF READ SMART DATA SECTION ===
  17. SMART overall-health self-assessment test result: PASSED
  18.  
  19. General SMART Values:
  20. Offline data collection status: (0x00) Offline data collection activity
  21. was never started.
  22. Auto Offline Data Collection: Disabled.
  23. Self-test execution status: ( 0) The previous self-test routine completed
  24. without error or no self-test has ever
  25. been run.
  26. Total time to complete Offline
  27. data collection: ( 1828) seconds.
  28. Offline data collection
  29. capabilities: (0x1b) SMART execute Offline immediate.
  30. Auto Offline data collection on/off support.
  31. Suspend Offline collection upon new
  32. command.
  33. Offline surface scan supported.
  34. Self-test supported.
  35. No Conveyance Self-test supported.
  36. No Selective Self-test supported.
  37. SMART capabilities: (0x0003) Saves SMART data before entering
  38. power-saving mode.
  39. Supports SMART auto save timer.
  40. Error logging capability: (0x01) Error logging supported.
  41. General Purpose Logging supported.
  42. Short self-test routine
  43. recommended polling time: ( 1) minutes.
  44. Extended self-test routine
  45. recommended polling time: ( 31) minutes.
  46.  
  47. SMART Attributes Data Structure revision number: 16
  48. Vendor Specific SMART Attributes with Thresholds:
  49. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  50. 1 Raw_Read_Error_Rate 0x000b 099 099 060 Pre-fail Always - 65538
  51. 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
  52. 3 Spin_Up_Time 0x0007 107 107 024 Pre-fail Always - 187 (Average 186)
  53. 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 403
  54. 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 45
  55. 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
  56. 8 Seek_Time_Performance 0x0005 100 100 020 Pre-fail Offline - 0
  57. 9 Power_On_Hours 0x0012 093 093 000 Old_age Always - 49433
  58. 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
  59. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 403
  60. 192 Power-Off_Retract_Count 0x0032 098 098 050 Old_age Always - 2433
  61. 193 Load_Cycle_Count 0x0012 098 098 050 Old_age Always - 2433
  62. 194 Temperature_Celsius 0x0002 152 152 000 Old_age Always - 36 (Min/Max 14/49)
  63. 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 46
  64. 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 23
  65. 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
  66. 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
  67.  
  68. SMART Error Log Version: 1
  69. ATA Error Count: 931 (device log contains only the most recent five errors)
  70. CR = Command Register [HEX]
  71. FR = Features Register [HEX]
  72. SC = Sector Count Register [HEX]
  73. SN = Sector Number Register [HEX]
  74. CL = Cylinder Low Register [HEX]
  75. CH = Cylinder High Register [HEX]
  76. DH = Device/Head Register [HEX]
  77. DC = Device Command Register [HEX]
  78. ER = Error register [HEX]
  79. ST = Status register [HEX]
  80. Powered_Up_Time is measured from power on, and printed as
  81. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  82. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  83.  
  84. Error 931 occurred at disk power-on lifetime: 49149 hours (2047 days + 21 hours)
  85. When the command that caused the error occurred, the device was active or idle.
  86.  
  87. After command completion occurred, registers were:
  88. ER ST SC SN CL CH DH
  89. -- -- -- -- -- -- --
  90. 40 51 91 9f 50 cc e4 Error: UNC 145 sectors at LBA = 0x04cc509f = 80498847
  91.  
  92. Commands leading to the command that caused the error were:
  93. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  94. -- -- -- -- -- -- -- -- ---------------- --------------------
  95. c8 00 00 30 50 cc e4 00 03:31:32.500 READ DMA
  96. c8 00 00 30 4f cc e4 00 03:31:32.400 READ DMA
  97. c8 00 00 30 4e cc e4 00 03:31:32.400 READ DMA
  98. c8 00 00 30 4d cc e4 00 03:31:32.400 READ DMA
  99. c8 00 00 30 4c cc e4 00 03:31:32.400 READ DMA
  100.  
  101. Error 930 occurred at disk power-on lifetime: 48613 hours (2025 days + 13 hours)
  102. When the command that caused the error occurred, the device was active or idle.
  103.  
  104. After command completion occurred, registers were:
  105. ER ST SC SN CL CH DH
  106. -- -- -- -- -- -- --
  107. 40 51 02 b6 7d e7 e4 Error: UNC 2 sectors at LBA = 0x04e77db6 = 82279862
  108.  
  109. Commands leading to the command that caused the error were:
  110. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  111. -- -- -- -- -- -- -- -- ---------------- --------------------
  112. c8 00 08 b0 7d e7 e4 00 01:14:30.600 READ DMA
  113. c8 00 08 f0 5e 63 e0 00 01:14:30.600 READ DMA
  114. e7 00 00 00 00 00 a0 00 01:14:30.600 FLUSH CACHE
  115. ca 00 08 e0 14 5f e0 00 01:14:30.600 WRITE DMA
  116. ca 00 08 2a ed 03 e0 00 01:14:30.600 WRITE DMA
  117.  
  118. Error 929 occurred at disk power-on lifetime: 48613 hours (2025 days + 13 hours)
  119. When the command that caused the error occurred, the device was active or idle.
  120.  
  121. After command completion occurred, registers were:
  122. ER ST SC SN CL CH DH
  123. -- -- -- -- -- -- --
  124. 40 51 0a b6 7d e7 e4 Error: UNC 10 sectors at LBA = 0x04e77db6 = 82279862
  125.  
  126. Commands leading to the command that caused the error were:
  127. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  128. -- -- -- -- -- -- -- -- ---------------- --------------------
  129. c8 00 20 a0 7d e7 e4 00 01:14:25.500 READ DMA
  130. ca 00 20 00 f8 15 e3 00 01:14:25.500 WRITE DMA
  131. ca 00 08 f8 7c e7 e4 00 01:14:25.500 WRITE DMA
  132. ca 00 20 c0 94 1c e3 00 01:14:25.500 WRITE DMA
  133. ca 00 20 00 f8 15 e3 00 01:14:25.500 WRITE DMA
  134.  
  135. Error 928 occurred at disk power-on lifetime: 48613 hours (2025 days + 13 hours)
  136. When the command that caused the error occurred, the device was active or idle.
  137.  
  138. After command completion occurred, registers were:
  139. ER ST SC SN CL CH DH
  140. -- -- -- -- -- -- --
  141. 40 51 08 d8 b1 63 e0 Error: UNC 8 sectors at LBA = 0x0063b1d8 = 6533592
  142.  
  143. Commands leading to the command that caused the error were:
  144. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  145. -- -- -- -- -- -- -- -- ---------------- --------------------
  146. c8 00 08 d8 b1 63 e0 00 01:07:44.300 READ DMA
  147. ca 00 08 e0 14 5f e0 00 01:07:44.300 WRITE DMA
  148. ca 00 01 49 4c 09 e0 00 01:07:44.300 WRITE DMA
  149. ca 00 08 b9 aa 08 e0 00 01:07:44.300 WRITE DMA
  150. c8 00 08 d0 b1 63 e0 00 01:07:44.300 READ DMA
  151.  
  152. Error 927 occurred at disk power-on lifetime: 48613 hours (2025 days + 13 hours)
  153. When the command that caused the error occurred, the device was active or idle.
  154.  
  155. After command completion occurred, registers were:
  156. ER ST SC SN CL CH DH
  157. -- -- -- -- -- -- --
  158. 40 51 08 d8 b1 63 e0 Error: UNC 8 sectors at LBA = 0x0063b1d8 = 6533592
  159.  
  160. Commands leading to the command that caused the error were:
  161. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  162. -- -- -- -- -- -- -- -- ---------------- --------------------
  163. c8 00 20 c0 b1 63 e0 00 01:07:39.200 READ DMA
  164. ca 00 08 99 aa 08 e0 00 01:07:39.200 WRITE DMA
  165. ca 00 08 b0 b1 63 e0 00 01:07:39.200 WRITE DMA
  166. ca 00 08 91 aa 08 e0 00 01:07:39.200 WRITE DMA
  167. ca 00 18 90 b1 63 e0 00 01:07:39.200 WRITE DMA
  168.  
  169. SMART Self-test log structure revision number 1
  170. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  171. # 1 Short offline Completed without error 00% 49433 -
  172.  
  173. Selective Self-tests/Logging not supported
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!