Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Initializing cgroup subsys cpuset
- Initializing cgroup subsys cpu
- Linux version 2.6.37-ARCH (tobias@T-POWA-LX) (gcc version 4.5.2 20110127 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Mar 8 08:08:06 UTC 2011
- BIOS-provided physical RAM map:
- BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
- BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
- BIOS-e820: 00000000000e7000 - 0000000000100000 (reserved)
- BIOS-e820: 0000000000100000 - 000000009ffc0000 (usable)
- BIOS-e820: 000000009ffc0000 - 000000009ffce000 (ACPI data)
- BIOS-e820: 000000009ffce000 - 000000009fff0000 (ACPI NVS)
- BIOS-e820: 000000009fff0000 - 00000000a0000000 (reserved)
- BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
- BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved)
- BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
- BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
- Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
- DMI 2.3 present.
- DMI: ECS P4M890T-M/P4M890T-M, BIOS 080013 09/08/2006
- e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
- e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
- last_pfn = 0x9ffc0 max_arch_pfn = 0x100000
- MTRR default type: uncachable
- MTRR fixed ranges enabled:
- 00000-9FFFF write-back
- A0000-DFFFF uncachable
- E0000-EFFFF write-through
- F0000-FFFFF write-protect
- MTRR variable ranges enabled:
- 0 base 000000000 mask F80000000 write-back
- 1 base 080000000 mask FE0000000 write-back
- 2 disabled
- 3 disabled
- 4 disabled
- 5 disabled
- 6 disabled
- 7 disabled
- x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- found SMP MP-table at [c00ff780] ff780
- Scanning 0 areas for low memory corruption
- initial memory mapped : 0 - 01800000
- init_memory_mapping: 0000000000000000-00000000377fe000
- 0000000000 - 0000400000 page 4k
- 0000400000 - 0037400000 page 2M
- 0037400000 - 00377fe000 page 4k
- kernel direct mapping tables up to 377fe000 @ 17fb000-1800000
- RAMDISK: 7fe57000 - 7fff0000
- Allocated new RAMDISK: 37665000 - 377fdbcc
- Move RAMDISK from 000000007fe57000 - 000000007ffefbcb to 37665000 - 377fdbcb
- ACPI: RSDP 000f8dd0 00014 (v00 ACPIAM)
- ACPI: RSDT 9ffc0000 00034 (v01 A M I OEMRSDT 09000608 MSFT 00000097)
- ACPI: FACP 9ffc0200 00084 (v02 A M I OEMFACP 09000608 MSFT 00000097)
- ACPI: DSDT 9ffc0450 04601 (v01 12345 12345123 00000123 INTL 02002026)
- ACPI: FACS 9ffce000 00040
- ACPI: APIC 9ffc0390 00078 (v01 A M I OEMAPIC 09000608 MSFT 00000097)
- ACPI: MCFG 9ffc0410 0003C (v01 A M I OEMMCFG 09000608 MSFT 00000097)
- ACPI: OEMB 9ffce040 00046 (v01 A M I AMI_OEM 09000608 MSFT 00000097)
- ACPI: Local APIC address 0xfee00000
- 1671MB HIGHMEM available.
- 887MB LOWMEM available.
- mapped low ram: 0 - 377fe000
- low ram: 0 - 377fe000
- Zone PFN ranges:
- DMA 0x00000010 -> 0x00001000
- Normal 0x00001000 -> 0x000377fe
- HighMem 0x000377fe -> 0x0009ffc0
- Movable zone start PFN for each node
- early_node_map[2] active PFN ranges
- 0: 0x00000010 -> 0x0000009f
- 0: 0x00000100 -> 0x0009ffc0
- On node 0 totalpages: 655183
- free_area_init_node: node 0, pgdat c1445880, node_mem_map f6264200
- DMA zone: 32 pages used for memmap
- DMA zone: 0 pages reserved
- DMA zone: 3951 pages, LIFO batch:0
- Normal zone: 1744 pages used for memmap
- Normal zone: 221486 pages, LIFO batch:31
- HighMem zone: 3344 pages used for memmap
- HighMem zone: 424626 pages, LIFO batch:31
- Using APIC driver default
- ACPI: PM-Timer IO Port: 0x808
- ACPI: Local APIC address 0xfee00000
- ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
- ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
- ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
- ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
- IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
- ACPI: IOAPIC (id[0x02] address[0xfecc0000] gsi_base[24])
- IOAPIC[1]: apic_id 2, version 3, address 0xfecc0000, GSI 24-47
- ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
- ACPI: IRQ0 used by override.
- ACPI: IRQ2 used by override.
- ACPI: IRQ9 used by override.
- Using ACPI (MADT) for SMP configuration information
- SMP: Allowing 4 CPUs, 3 hotplug CPUs
- nr_irqs_gsi: 64
- PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
- PM: Registered nosave memory: 00000000000a0000 - 00000000000e7000
- PM: Registered nosave memory: 00000000000e7000 - 0000000000100000
- Allocating PCI resources starting at a0000000 (gap: a0000000:5ec00000)
- Booting paravirtualized kernel on bare hardware
- setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
- PERCPU: Embedded 12 pages/cpu @f5c00000 s27264 r0 d21888 u1048576
- pcpu-alloc: s27264 r0 d21888 u1048576 alloc=1*4194304
- pcpu-alloc: [0] 0 1 2 3
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 650063
- Kernel command line: root=/dev/disk/by-uuid/56486cd5-f4c1-4bc4-b482-ffb2ef5a1c43 ro vga=793
- PID hash table entries: 4096 (order: 2, 16384 bytes)
- Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- Initializing CPU#0
- allocated 13105600 bytes of page_cgroup
- please try 'cgroup_disable=memory' option if you don't want memory cgroups
- Initializing HighMem for node 0 (000377fe:0009ffc0)
- Memory: 2578968k/2621184k available (3165k kernel code, 41764k reserved, 1243k data, 424k init, 1711880k highmem)
- virtual kernel memory layout:
- fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
- pkmap : 0xff800000 - 0xffc00000 (4096 kB)
- vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
- lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
- .init : 0xc144f000 - 0xc14b9000 ( 424 kB)
- .data : 0xc1317768 - 0xc144e5a0 (1243 kB)
- .text : 0xc1000000 - 0xc1317768 (3165 kB)
- Checking if this processor honours the WP bit even in supervisor mode...Ok.
- SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- Preemptable hierarchical RCU implementation.
- RCU-based detection of stalled CPUs is disabled.
- Verbose stalled-CPUs detection is disabled.
- NR_IRQS:512
- CPU 0 irqstacks, hard=f4808000 soft=f480a000
- Console: colour dummy device 80x25
- console [tty0] enabled
- Fast TSC calibration failed
- TSC: Unable to calibrate against PIT
- TSC: using PMTIMER reference calibration
- Detected 3058.777 MHz processor.
- Calibrating delay loop (skipped), value calculated using timer frequency.. 6120.45 BogoMIPS (lpj=10195923)
- pid_max: default: 32768 minimum: 301
- Security Framework initialized
- AppArmor: AppArmor disabled by boot time parameter
- Mount-cache hash table entries: 512
- Initializing cgroup subsys ns
- ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
- Initializing cgroup subsys cpuacct
- Initializing cgroup subsys memory
- Initializing cgroup subsys devices
- Initializing cgroup subsys freezer
- Initializing cgroup subsys net_cls
- Initializing cgroup subsys blkio
- CPU0: Hyper-Threading is disabled
- mce: CPU supports 4 MCE banks
- CPU0: Thermal monitoring enabled (TM1)
- using mwait in idle threads.
- Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
- ... version: 0
- ... bit width: 40
- ... generic registers: 18
- ... value mask: 000000ffffffffff
- ... max period: 0000007fffffffff
- ... fixed-purpose events: 0
- ... event mask: 000000000003ffff
- SMP alternatives: switching to UP code
- ACPI: Core revision 20101013
- Enabling APIC mode: Flat. Using 2 I/O APICs
- ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- CPU0: Intel(R) Celeron(R) D CPU 3.06GHz stepping 04
- NMI watchdog enabled, takes one hw-pmu counter.
- Brought up 1 CPUs
- Total of 1 processors activated (6120.45 BogoMIPS).
- devtmpfs: initialized
- NET: Registered protocol family 16
- ACPI: bus type pci registered
- PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- PCI: not using MMCONFIG
- PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
- PCI: Using configuration type 1 for base access
- bio: create slab <bio-0> at 0
- ACPI: EC: Look up EC in DSDT
- ACPI: Executed 1 blocks of module-level executable AML code
- ACPI: Interpreter enabled
- ACPI: (supports S0 S1 S4 S5)
- ACPI: Using IOAPIC for interrupt routing
- PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
- PCI: Using MMCONFIG for extended config space
- ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723)
- ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723)
- ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723)
- ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723)
- ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723)
- ACPI: No dock devices found.
- PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
- ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
- pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
- pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
- pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
- pci_root PNP0A03:00: host bridge window [mem 0xa0000000-0xff77ffff] (ignored)
- pci 0000:00:00.0: [1106:0327] type 0 class 0x000600
- pci 0000:00:00.0: reg 10: [mem 0xf0000000-0xf7ffffff pref]
- pci 0000:00:00.1: [1106:1327] type 0 class 0x000600
- pci 0000:00:00.2: [1106:2327] type 0 class 0x000600
- pci 0000:00:00.3: [1106:3327] type 0 class 0x000600
- pci 0000:00:00.4: [1106:4327] type 0 class 0x000600
- pci 0000:00:00.5: [1106:5327] type 0 class 0x000800
- pci 0000:00:00.6: [1106:6327] type 0 class 0x000600
- pci 0000:00:00.7: [1106:7327] type 0 class 0x000600
- pci 0000:00:01.0: [1106:b198] type 1 class 0x000604
- pci 0000:00:02.0: [1106:a327] type 1 class 0x000604
- pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:02.0: PME# disabled
- pci 0000:00:03.0: [1106:c327] type 1 class 0x000604
- pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:03.0: PME# disabled
- pci 0000:00:08.0: [1106:3106] type 0 class 0x000200
- pci 0000:00:08.0: reg 10: [io 0xe800-0xe8ff]
- pci 0000:00:08.0: reg 14: [mem 0xff6ffc00-0xff6ffcff]
- pci 0000:00:08.0: supports D1 D2
- pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold
- pci 0000:00:08.0: PME# disabled
- pci 0000:00:0f.0: [1106:3149] type 0 class 0x000101
- pci 0000:00:0f.0: reg 10: [io 0xec00-0xec07]
- pci 0000:00:0f.0: reg 14: [io 0xe480-0xe483]
- pci 0000:00:0f.0: reg 18: [io 0xe400-0xe407]
- pci 0000:00:0f.0: reg 1c: [io 0xe080-0xe083]
- pci 0000:00:0f.0: reg 20: [io 0xe000-0xe00f]
- pci 0000:00:0f.0: reg 24: [io 0xd800-0xd8ff]
- pci 0000:00:0f.1: [1106:0571] type 0 class 0x000101
- pci 0000:00:0f.1: reg 20: [io 0xfc00-0xfc0f]
- pci 0000:00:10.0: [1106:3038] type 0 class 0x000c03
- pci 0000:00:10.0: reg 20: [io 0xdc00-0xdc1f]
- pci 0000:00:10.0: supports D1 D2
- pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
- pci 0000:00:10.0: PME# disabled
- pci 0000:00:10.1: [1106:3038] type 0 class 0x000c03
- pci 0000:00:10.1: reg 20: [io 0xd480-0xd49f]
- pci 0000:00:10.1: supports D1 D2
- pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
- pci 0000:00:10.1: PME# disabled
- pci 0000:00:10.2: [1106:3038] type 0 class 0x000c03
- pci 0000:00:10.2: reg 20: [io 0xd400-0xd41f]
- pci 0000:00:10.2: supports D1 D2
- pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
- pci 0000:00:10.2: PME# disabled
- pci 0000:00:10.3: [1106:3038] type 0 class 0x000c03
- pci 0000:00:10.3: reg 20: [io 0xd080-0xd09f]
- pci 0000:00:10.3: supports D1 D2
- pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
- pci 0000:00:10.3: PME# disabled
- pci 0000:00:10.4: [1106:3104] type 0 class 0x000c03
- pci 0000:00:10.4: reg 10: [mem 0xff6ff800-0xff6ff8ff]
- pci 0000:00:10.4: supports D1 D2
- pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
- pci 0000:00:10.4: PME# disabled
- pci 0000:00:11.0: [1106:3227] type 0 class 0x000601
- HPET not enabled in BIOS. You might try hpet=force boot option
- pci 0000:00:11.5: [1106:3059] type 0 class 0x000401
- pci 0000:00:11.5: reg 10: [io 0xee00-0xeeff]
- pci 0000:00:11.5: supports D1 D2
- pci 0000:00:01.0: PCI bridge to [bus 01-01]
- pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled)
- pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
- pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
- pci 0000:02:00.0: [1002:7142] type 0 class 0x000300
- pci 0000:02:00.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref]
- pci 0000:02:00.0: reg 18: [mem 0xff5f0000-0xff5fffff 64bit]
- pci 0000:02:00.0: reg 20: [io 0xc000-0xc0ff]
- pci 0000:02:00.0: reg 30: [mem 0xff5c0000-0xff5dffff pref]
- pci 0000:02:00.0: supports D1 D2
- pci 0000:02:00.1: [1002:7162] type 0 class 0x000380
- pci 0000:02:00.1: reg 10: [mem 0xff5e0000-0xff5effff 64bit]
- pci 0000:02:00.1: supports D1 D2
- pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
- pci 0000:00:02.0: PCI bridge to [bus 02-02]
- pci 0000:00:02.0: bridge window [io 0xa000-0xcfff]
- pci 0000:00:02.0: bridge window [mem 0xff500000-0xff5fffff]
- pci 0000:00:02.0: bridge window [mem 0xbff00000-0xdfefffff 64bit pref]
- pci 0000:00:03.0: PCI bridge to [bus 03-03]
- pci 0000:00:03.0: bridge window [io 0xf000-0x0000] (disabled)
- pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
- pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
- pci_bus 0000:00: on NUMA node 0
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP0._PRT]
- ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
- ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12 14 15)
- ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
- ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
- ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
- ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
- ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
- ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
- HEST: Table is not found!
- vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
- vgaarb: loaded
- PCI: Using ACPI for IRQ routing
- PCI: pci_cache_line_size set to 64 bytes
- reserve RAM buffer: 000000000009fc00 - 000000000009ffff
- reserve RAM buffer: 000000009ffc0000 - 000000009fffffff
- NetLabel: Initializing
- NetLabel: domain hash size = 128
- NetLabel: protocols = UNLABELED CIPSOv4
- NetLabel: unlabeled traffic allowed by default
- Switching to clocksource tsc
- pnp: PnP ACPI init
- ACPI: bus type pnp registered
- pnp 00:00: [bus 00-ff]
- pnp 00:00: [io 0x0cf8-0x0cff]
- pnp 00:00: [io 0x0000-0x0cf7 window]
- pnp 00:00: [io 0x0d00-0xffff window]
- pnp 00:00: [mem 0x000a0000-0x000bffff window]
- pnp 00:00: [mem 0x000d0000-0x000dffff window]
- pnp 00:00: [mem 0xa0000000-0xff77ffff window]
- pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
- pnp 00:01: [dma 4]
- pnp 00:01: [io 0x0000-0x000f]
- pnp 00:01: [io 0x0081-0x0083]
- pnp 00:01: [io 0x0087]
- pnp 00:01: [io 0x0089-0x008b]
- pnp 00:01: [io 0x008f]
- pnp 00:01: [io 0x00c0-0x00df]
- pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
- pnp 00:02: [io 0x0070-0x0071]
- pnp 00:02: [irq 8]
- pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
- pnp 00:03: [io 0x0061]
- pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
- pnp 00:04: [io 0x00f0-0x00ff]
- pnp 00:04: [irq 13]
- pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
- pnp 00:05: [io 0x03f0-0x03f5]
- pnp 00:05: [io 0x03f7]
- pnp 00:05: [irq 6]
- pnp 00:05: [dma 2]
- pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
- pnp 00:06: [io 0x0378-0x037f]
- pnp 00:06: [io 0x0778-0x077f]
- pnp 00:06: [irq 7]
- pnp 00:06: [dma 3]
- pnp 00:06: Plug and Play ACPI device, IDs PNP0401 (active)
- pnp 00:07: [io 0x0000-0xffffffff disabled]
- pnp 00:07: [io 0x0a00-0x0a0f]
- pnp 00:07: [io 0x0a10-0x0a1f]
- pnp 00:07: [io 0x0a20-0x0a2f]
- pnp 00:07: [io 0x0a30-0x0a3f]
- pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
- pnp 00:08: [io 0x0010-0x001f]
- pnp 00:08: [io 0x0022-0x003f]
- pnp 00:08: [io 0x0044-0x005f]
- pnp 00:08: [io 0x0062-0x0063]
- pnp 00:08: [io 0x0065-0x006f]
- pnp 00:08: [io 0x0072-0x007f]
- pnp 00:08: [io 0x0080]
- pnp 00:08: [io 0x0084-0x0086]
- pnp 00:08: [io 0x0088]
- pnp 00:08: [io 0x008c-0x008e]
- pnp 00:08: [io 0x0090-0x009f]
- pnp 00:08: [io 0x00a2-0x00bf]
- pnp 00:08: [io 0x00e0-0x00ef]
- pnp 00:08: [io 0x03e0-0x03e7]
- pnp 00:08: [mem 0xff380000-0xff3fffff]
- pnp 00:08: [io 0x04d0-0x04d1]
- pnp 00:08: [io 0x0800-0x087f]
- pnp 00:08: [io 0x0400-0x041f]
- pnp 00:08: [io 0x0000-0xffffffff disabled]
- pnp 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
- pnp 00:09: [mem 0xfec00000-0xfec00fff]
- pnp 00:09: [mem 0xfee00000-0xfee00fff]
- pnp 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
- pnp 00:0a: [io 0x03f8-0x03ff]
- pnp 00:0a: [irq 4]
- pnp 00:0a: [dma 0 disabled]
- pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
- pnp 00:0b: [mem 0xe0000000-0xefffffff]
- pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
- pnp 00:0c: [mem 0x00000000-0x0009ffff]
- pnp 00:0c: [mem 0x000c0000-0x000cffff]
- pnp 00:0c: [mem 0x000e0000-0x000fffff]
- pnp 00:0c: [mem 0x00100000-0x9fffffff]
- pnp 00:0c: [mem 0xff780000-0xffffffff]
- pnp 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
- pnp: PnP ACPI: found 13 devices
- ACPI: ACPI bus type pnp unregistered
- system 00:07: [io 0x0a00-0x0a0f] has been reserved
- system 00:07: [io 0x0a10-0x0a1f] has been reserved
- system 00:07: [io 0x0a20-0x0a2f] has been reserved
- system 00:07: [io 0x0a30-0x0a3f] has been reserved
- system 00:08: [io 0x03e0-0x03e7] has been reserved
- system 00:08: [io 0x04d0-0x04d1] has been reserved
- system 00:08: [io 0x0800-0x087f] has been reserved
- system 00:08: [io 0x0400-0x041f] has been reserved
- system 00:08: [mem 0xff380000-0xff3fffff] has been reserved
- system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
- system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
- system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
- system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
- system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
- system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
- system 00:0c: [mem 0x00100000-0x9fffffff] could not be reserved
- system 00:0c: [mem 0xff780000-0xffffffff] has been reserved
- pci 0000:00:03.0: BAR 14: assigned [mem 0xa0000000-0xa01fffff]
- pci 0000:00:03.0: BAR 15: assigned [mem 0xa0200000-0xa03fffff 64bit pref]
- pci 0000:00:03.0: BAR 13: assigned [io 0x1000-0x1fff]
- pci 0000:00:01.0: PCI bridge to [bus 01-01]
- pci 0000:00:01.0: bridge window [io disabled]
- pci 0000:00:01.0: bridge window [mem disabled]
- pci 0000:00:01.0: bridge window [mem pref disabled]
- pci 0000:00:02.0: PCI bridge to [bus 02-02]
- pci 0000:00:02.0: bridge window [io 0xa000-0xcfff]
- pci 0000:00:02.0: bridge window [mem 0xff500000-0xff5fffff]
- pci 0000:00:02.0: bridge window [mem 0xbff00000-0xdfefffff 64bit pref]
- pci 0000:00:03.0: PCI bridge to [bus 03-03]
- pci 0000:00:03.0: bridge window [io 0x1000-0x1fff]
- pci 0000:00:03.0: bridge window [mem 0xa0000000-0xa01fffff]
- pci 0000:00:03.0: bridge window [mem 0xa0200000-0xa03fffff 64bit pref]
- pci 0000:00:01.0: setting latency timer to 64
- pci 0000:00:02.0: PCI INT A -> GSI 27 (level, low) -> IRQ 27
- pci 0000:00:02.0: setting latency timer to 64
- pci 0000:00:03.0: enabling device (0104 -> 0107)
- pci 0000:00:03.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31
- pci 0000:00:03.0: setting latency timer to 64
- pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
- pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
- pci_bus 0000:02: resource 0 [io 0xa000-0xcfff]
- pci_bus 0000:02: resource 1 [mem 0xff500000-0xff5fffff]
- pci_bus 0000:02: resource 2 [mem 0xbff00000-0xdfefffff 64bit pref]
- pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
- pci_bus 0000:03: resource 1 [mem 0xa0000000-0xa01fffff]
- pci_bus 0000:03: resource 2 [mem 0xa0200000-0xa03fffff 64bit pref]
- NET: Registered protocol family 2
- IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- TCP: Hash tables configured (established 131072 bind 65536)
- TCP reno registered
- UDP hash table entries: 512 (order: 2, 16384 bytes)
- UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- NET: Registered protocol family 1
- pci 0000:00:01.0: disabling DAC on VIA PCI bridge
- pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message
- pci 0000:02:00.0: Boot video device
- PCI: CLS 32 bytes, default 64
- Unpacking initramfs...
- Freeing initrd memory: 1636k freed
- apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
- apm: overridden by ACPI.
- Scanning for low memory corruption every 60 seconds
- audit: initializing netlink socket (disabled)
- type=2000 audit(1300066372.223:1): initialized
- highmem bounce pool size: 64 pages
- HugeTLB registered 4 MB page size, pre-allocated 0 pages
- VFS: Disk quotas dquot_6.5.2
- Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- msgmni has been set to 1696
- Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- io scheduler noop registered
- io scheduler deadline registered
- io scheduler cfq registered (default)
- vesafb: framebuffer at 0xc0000000, mapped to 0xf8080000, using 5120k, total 16384k
- vesafb: mode is 1280x1024x16, linelength=2560, pages=5
- vesafb: protected mode interface info at c000:a0e6
- vesafb: pmi: set display start = c00ca174, set palette = c00ca236
- vesafb: scrolling: redraw
- vesafb: Truecolor: size=0:5:5:5, shift=0:10:5:0
- Console: switching to colour frame buffer device 160x64
- fb0: VESA VGA frame buffer device
- ERST: Table is not found!
- isapnp: Scanning for PnP cards...
- isapnp: No Plug & Play device found
- Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
- serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- PNP: No PS/2 controller found. Probing ports directly.
- serio: i8042 KBD port at 0x60,0x64 irq 1
- serio: i8042 AUX port at 0x60,0x64 irq 12
- mice: PS/2 mouse device common for all mice
- rtc_cmos 00:02: RTC can wake from S4
- rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
- rtc0: alarms up to one year, y3k, 114 bytes nvram
- cpuidle: using governor ladder
- cpuidle: using governor menu
- TCP cubic registered
- NET: Registered protocol family 17
- Registering the dns_resolver key type
- Using IPI No-Shortcut mode
- PM: Hibernation image not present or could not be loaded.
- registered taskstats version 1
- rtc_cmos 00:02: setting system clock to 2011-03-14 01:32:53 UTC (1300066373)
- Initalizing network drop monitor service
- Freeing unused kernel memory: 424k freed
- udev[32]: starting version 166
- SCSI subsystem initialized
- libata version 3.00 loaded.
- pata_via 0000:00:0f.1: version 0.3.4
- pata_via 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
- scsi0 : pata_via
- scsi1 : pata_via
- ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
- ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
- sata_via 0000:00:0f.0: version 2.6
- sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20
- sata_via 0000:00:0f.0: routed to hard irq line 5
- scsi2 : sata_via
- scsi3 : sata_via
- ata3: SATA max UDMA/133 cmd 0xec00 ctl 0xe480 bmdma 0xe000 irq 20
- ata4: SATA max UDMA/133 cmd 0xe400 ctl 0xe080 bmdma 0xe008 irq 20
- ata3: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
- ata2.00: ATAPI: Optiarc DVD RW AD-7170A, 1.02, max UDMA/66
- ata2.00: configured for UDMA/66
- scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7170A 1.02 PQ: 0 ANSI: 5
- ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- ata4.00: ATA-7: SAMSUNG HD160HJ, BF100-11, max UDMA7
- ata4.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
- ata4.00: configured for UDMA/133
- scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD160HJ BF10 PQ: 0 ANSI: 5
- sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
- cdrom: Uniform CD-ROM driver Revision: 3.20
- sr 1:0:0:0: Attached scsi CD-ROM sr0
- sd 3:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
- sd 3:0:0:0: [sda] Write Protect is off
- sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
- sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- sda: sda1 sda2 sda3 sda4
- sd 3:0:0:0: [sda] Attached SCSI disk
- EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
- udev[503]: starting version 166
- input: PC Speaker as /devices/platform/pcspkr/input/input0
- sr 1:0:0:0: Attached scsi generic sg0 type 5
- sd 3:0:0:0: Attached scsi generic sg1 type 0
- Linux agpgart interface v0.103
- pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
- ACPI: Sleep Button [SLPB]
- input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
- ACPI: Power Button [PWRB]
- input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
- ACPI: Power Button [PWRF]
- Floppy drive(s): fd0 is 1.44M
- FDC 0 is a post-1991 82077
- via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
- via-rhine 0000:00:08.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- thermal LNXTHERM:00: registered as thermal_zone0
- ACPI: Thermal Zone [THRM] (30 C)
- ACPI: acpi_idle registered with cpuidle
- eth0: VIA Rhine III at 0x1e800, 1c:bd:b9:86:66:0d, IRQ 16.
- eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 41e1.
- agpgart: Detected VIA P4M890 chipset
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- IT8712 SuperIO detected.
- parport_pc 00:06: reported by Plug and Play ACPI
- parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
- agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
- ppdev: user-space parallel port driver
- lp: driver loaded but no devices found
- lp0: using parport0 (interrupt-driven).
- ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
- ehci_hcd 0000:00:10.4: EHCI Host Controller
- ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
- ehci_hcd 0000:00:10.4: irq 21, io mem 0xff6ff800
- ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 8 ports detected
- [drm] Initialized drm 1.1.0 20060810
- uhci_hcd: USB Universal Host Controller Interface driver
- uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
- uhci_hcd 0000:00:10.0: UHCI Host Controller
- uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
- uhci_hcd 0000:00:10.0: irq 21, io base 0x0000dc00
- hub 2-0:1.0: USB hub found
- hub 2-0:1.0: 2 ports detected
- uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
- uhci_hcd 0000:00:10.1: UHCI Host Controller
- uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
- uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d480
- hub 3-0:1.0: USB hub found
- hub 3-0:1.0: 2 ports detected
- uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
- uhci_hcd 0000:00:10.2: UHCI Host Controller
- uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
- uhci_hcd 0000:00:10.2: irq 21, io base 0x0000d400
- hub 4-0:1.0: USB hub found
- hub 4-0:1.0: 2 ports detected
- uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
- uhci_hcd 0000:00:10.3: UHCI Host Controller
- uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
- uhci_hcd 0000:00:10.3: irq 21, io base 0x0000d080
- hub 5-0:1.0: USB hub found
- hub 5-0:1.0: 2 ports detected
- VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22
- VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
- [drm] radeon defaulting to kernel modesetting.
- [drm] radeon kernel modesetting enabled.
- checking generic (c0000000 1000000) vs hw (c0000000 10000000)
- fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
- Console: switching to colour dummy device 80x25
- radeon 0000:02:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
- radeon 0000:02:00.0: setting latency timer to 64
- [drm] initializing kernel modesetting (RV515 0x1002:0x7142).
- radeon 0000:02:00.0: PCI: Disallowing DAC for device
- radeon: No suitable DMA available.
- [drm] register mmio base: 0xFF5F0000
- [drm] register mmio size: 65536
- ATOM BIOS: RV515PRO
- [drm] Generation 2 PCI interface, using max accessible memory
- radeon 0000:02:00.0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used)
- radeon 0000:02:00.0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF
- radeon 0000:02:00.0: irq 64 for MSI/MSI-X
- radeon 0000:02:00.0: radeon: using MSI.
- [drm] radeon: irq initialized.
- [drm] Detected VRAM RAM=256M, BAR=256M
- [drm] RAM width 64bits DDR
- [TTM] Zone kernel: Available graphics memory: 434574 kiB.
- [TTM] Zone highmem: Available graphics memory: 1290514 kiB.
- [TTM] Initializing pool allocator.
- [drm] radeon: 256M of VRAM memory ready
- [drm] radeon: 512M of GTT memory ready.
- [drm] GART: num cpu pages 131072, num gpu pages 131072
- usb 2-1: new low speed USB device using uhci_hcd and address 2
- [drm] radeon: 1 quad pipes, 1 z pipes initialized.
- [drm] PCIE GART of 512M enabled (table at 0x00040000).
- radeon 0000:02:00.0: WB enabled
- [drm] Loading R500 Microcode
- [drm] radeon: ring at 0x0000000010001000
- [drm] ring test succeeded in 6 usecs
- [drm] radeon: ib pool ready.
- usb 3-1: new full speed USB device using uhci_hcd and address 2
- [drm] ib test succeeded in 0 usecs
- [drm] Radeon Display Connectors
- [drm] Connector 0:
- [drm] VGA
- [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
- [drm] Encoders:
- [drm] CRT1: INTERNAL_KLDSCP_DAC1
- [drm] Connector 1:
- [drm] S-video
- [drm] Encoders:
- [drm] TV1: INTERNAL_KLDSCP_DAC2
- [drm] Connector 2:
- [drm] DVI-I
- [drm] HPD2
- [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
- [drm] Encoders:
- [drm] CRT2: INTERNAL_KLDSCP_DAC2
- [drm] DFP3: INTERNAL_LVTM1
- input: KYE Systems Corp. Wireless Keyboard & Mouse as /devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0/input/input4
- generic-usb 0003:0458:0063.0001: input,hidraw0: USB HID v1.10 Keyboard [KYE Systems Corp. Wireless Keyboard & Mouse] on usb-0000:00:10.0-1/input0
- usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x8604
- usbcore: registered new interface driver usblp
- input: KYE Systems Corp. Wireless Keyboard & Mouse as /devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.1/input/input5
- generic-usb 0003:0458:0063.0002: input,hidraw1: USB HID v1.10 Mouse [KYE Systems Corp. Wireless Keyboard & Mouse] on usb-0000:00:10.0-1/input1
- usbcore: registered new interface driver usbhid
- usbhid: USB HID core driver
- [drm] fb mappable at 0xC00C0000
- [drm] vram apper at 0xC0000000
- [drm] size 5242880
- [drm] fb depth is 24
- [drm] pitch is 5120
- Console: switching to colour frame buffer device 128x48
- fb0: radeondrmfb frame buffer device
- drm: registered panic notifier
- [drm] Initialized radeon 2.7.0 20080528 for 0000:02:00.0 on minor 0
- EXT4-fs (sda3): re-mounted. Opts: (null)
- EXT4-fs (sda3): re-mounted. Opts: (null)
- EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
- Adding 2626620k swap on /dev/sda2. Priority:-1 extents:1 across:2626620k
- eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
- NET: Registered protocol family 10
- lo: Disabled Privacy Extensions
- eth0: no IPv6 routers present
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement