Advertisement
Guest User

Untitled

a guest
Sep 4th, 2011
669
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 5.96 KB | None | 0 0
  1. CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387f
  2. CPU: VIPT aliasing data cache, unknown instruction cache
  3. Machine: ARM-Versatile PB
  4. Memory policy: ECC disabled, Data cache writeback
  5. sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  6. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
  7. Kernel command line: root=/dev/sda rw init=/sbin/init.sh panic=1 console=ttyAMA0
  8. PID hash table entries: 512 (order: -1, 2048 bytes)
  9. Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  10. Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  11. Memory: 128MB = 128MB total
  12. Memory: 125660k/125660k available, 5412k reserved, 0K highmem
  13. Virtual kernel memory layout:
  14. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  15. fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  16. DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
  17. vmalloc : 0xc8800000 - 0xd8000000 ( 248 MB)
  18. lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
  19. modules : 0xbf000000 - 0xc0000000 ( 16 MB)
  20. .init : 0xc0008000 - 0xc0029000 ( 132 kB)
  21. .text : 0xc0029000 - 0xc03e9580 (3842 kB)
  22. .data : 0xc03ea000 - 0xc040a8a0 ( 131 kB)
  23. .bss : 0xc040a8c4 - 0xc0425990 ( 109 kB)
  24. NR_IRQS:192
  25. VIC @f1140000: id 0x00041190, vendor 0x41
  26. Console: colour dummy device 80x30
  27. Calibrating delay loop... 457.11 BogoMIPS (lpj=2285568)
  28. pid_max: default: 32768 minimum: 301
  29. Mount-cache hash table entries: 512
  30. CPU: Testing write buffer coherency: ok
  31. devtmpfs: initialized
  32. NET: Registered protocol family 16
  33. Serial: AMBA PL011 UART driver
  34. dev:f1: ttyAMA0 at MMIO 0x101f1000 (irq = 12) is a PL011 rev1
  35. console [ttyAMA0] enabled
  36. dev:f2: ttyAMA1 at MMIO 0x101f2000 (irq = 13) is a PL011 rev1
  37. dev:f3: ttyAMA2 at MMIO 0x101f3000 (irq = 14) is a PL011 rev1
  38. fpga:09: ttyAMA3 at MMIO 0x10009000 (irq = 38) is a PL011 rev1
  39. PCI core found (slot 11)
  40. PCI: bus0: Fast back to back transfers disabled
  41. PCI map irq: slot 0, pin 1, devslot 12, irq: 27
  42. pci 0000:00:0c.0: BAR 2: assigned [mem 0x50000000-0x50001fff]
  43. pci 0000:00:0c.0: BAR 2: set to [mem 0x50000000-0x50001fff] (PCI address [0x50000000-0x50001fff])
  44. pci 0000:00:0c.0: BAR 1: assigned [mem 0x50002000-0x500023ff]
  45. pci 0000:00:0c.0: BAR 1: set to [mem 0x50002000-0x500023ff] (PCI address [0x50002000-0x500023ff])
  46. pci 0000:00:0c.0: BAR 0: assigned [io 0x44000000-0x440000ff]
  47. pci 0000:00:0c.0: BAR 0: set to [io 0x44000000-0x440000ff] (PCI address [0x44000000-0x440000ff])
  48. bio: create slab <bio-0> at 0
  49. vgaarb: loaded
  50. SCSI subsystem initialized
  51. Advanced Linux Sound Architecture Driver Version 1.0.24.
  52. Switching to clocksource timer3
  53. NET: Registered protocol family 2
  54. IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  55. TCP established hash table entries: 4096 (order: 3, 32768 bytes)
  56. TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
  57. TCP: Hash tables configured (established 4096 bind 4096)
  58. TCP reno registered
  59. UDP hash table entries: 256 (order: 0, 4096 bytes)
  60. UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  61. NET: Registered protocol family 1
  62. RPC: Registered named UNIX socket transport module.
  63. RPC: Registered udp transport module.
  64. RPC: Registered tcp transport module.
  65. RPC: Registered tcp NFSv4.1 backchannel transport module.
  66. NetWinder Floating Point Emulator V0.97 (double precision)
  67. squashfs: version 4.0 (2009/01/31) Phillip Lougher
  68. Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  69. JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
  70. ROMFS MTD (C) 2007 Red Hat, Inc.
  71. msgmni has been set to 245
  72. Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
  73. io scheduler noop registered
  74. io scheduler deadline registered
  75. io scheduler cfq registered (default)
  76. clcd-pl11x dev:20: PL110 rev0 at 0x10120000
  77. clcd-pl11x dev:20: Versatile hardware, VGA display
  78. Console: switching to colour frame buffer device 80x30
  79. brd: module loaded
  80. PCI: enabling device 0000:00:0c.0 (0100 -> 0103)
  81. sym0: <895a> rev 0x0 at pci 0000:00:0c.0 irq 27
  82. sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking
  83. sym0: SCSI BUS has been reset.
  84. scsi0 : sym-2.2.3
  85. scsi 0:0:2:0: CD-ROM QEMU QEMU CD-ROM 0.15 PQ: 0 ANSI: 5
  86. scsi target0:0:2: tagged command queuing enabled, command queue depth 16.
  87. scsi target0:0:2: Beginning Domain Validation
  88. scsi target0:0:2: Domain Validation skipping write tests
  89. scsi target0:0:2: Ending Domain Validation
  90. sr0: scsi3-mmc drive: 16x/50x cd/rw xa/form2 cdda tray
  91. cdrom: Uniform CD-ROM driver Revision: 3.20
  92. physmap platform flash device: 04000000 at 34000000
  93. physmap-flash physmap-flash.0: map_probe failed
  94. smc91x.c: v1.1, sep 22 2004 by Nicolas Pitre <nico@fluxnic.net>
  95. eth0: SMC91C11xFD (rev 1) at c8800000 IRQ 25 [nowait]
  96. eth0: Ethernet addr: 52:54:00:12:34:56
  97. mousedev: PS/2 mouse device common for all mice
  98. mmci-pl18x fpga:05: mmc0: PL181 manf 41 rev0 at 0x10005000 irq 22,33 (pio)
  99. mmci-pl18x fpga:0b: mmc1: PL181 manf 41 rev0 at 0x1000b000 irq 23,34 (pio)
  100. ALSA device list:
  101. No soundcards found.
  102. TCP cubic registered
  103. NET: Registered protocol family 17
  104. input: AT Raw Set 2 keyboard as /devices/fpga:06/serio0/input/input0
  105. input: ImExPS/2 Generic Explorer Mouse as /devices/fpga:07/serio1/input/input1
  106. Root-NFS: no NFS server address
  107. VFS: Unable to mount root fs via NFS, trying floppy.
  108. VFS: Cannot open root device "sda" or unknown-block(2,0)
  109. Please append a correct "root=" boot option; here are the available partitions:
  110. 0b00 1048575 sr0 driver: sr
  111. Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(2,0)
  112. [<c0035bec>] (unwind_backtrace+0x0/0xf0) from [<c0301f58>] (panic+0x58/0x170)
  113. [<c0301f58>] (panic+0x58/0x170) from [<c0008d44>] (mount_block_root+0x15c/0x20c)
  114. [<c0008d44>] (mount_block_root+0x15c/0x20c) from [<c0008f94>] (mount_root+0xa4/0xc8)
  115. [<c0008f94>] (mount_root+0xa4/0xc8) from [<c000911c>] (prepare_namespace+0x164/0x1c8)
  116. [<c000911c>] (prepare_namespace+0x164/0x1c8) from [<c00089fc>] (kernel_init+0xe4/0x118)
  117. [<c00089fc>] (kernel_init+0xe4/0x118) from [<c0030ac0>] (kernel_thread_exit+0x0/0x8)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement