API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Nov 6th, 2016
1,189
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.28 KB | None | 0 0
raw download clone embed print report
  1. [ 350.595095@0] aml_wifi wifi.32: [extern_wifi_set_enable] WIFI Disable! 240
  2. [ 350.796469@0] aml_wifi wifi.32: [extern_wifi_set_enable] WIFI Enable! 240
  3. [ 350.997770@0] sdio_reset_comm():
  4. [ 351.034183@0] sdio: queuing unknown CIS tuple 0x01 (3 bytes)
  5. [ 351.046188@0] sdio: queuing unknown CIS tuple 0x1a (5 bytes)
  6. [ 351.051519@0] sdio: queuing unknown CIS tuple 0x1b (8 bytes)
  7. [ 351.052852@0] sdio: queuing unknown CIS tuple 0x14 (0 bytes)
  8. [ 351.060250@0] sdio: clk 200000000 SDR mode tuning start
  9. [ 351.062744@0] sdio: rx_tuning_result[0] = 10
  10. [ 351.066996@0] sdio: rx_tuning_result[1] = 10
  11. [ 351.071483@0] sdio: rx_tuning_result[2] = 10
  12. [ 351.075425@0] sdio: rx_tuning_result[4] = 10
  13. [ 351.079546@0] sdio: best_win_start =4, best_win_size =4
  14. [ 351.084722@0] sdio: sd_emmc_regs->gclock=0x1000245,sd_emmc_regs->gadjust=0x12000
  15. [ 351.092032@0] sdio: gclock =0x1000245, gdelay=0x0, gadjust=0x12000
  16. [ 351.098160@0] [sdio_reinit] finish
  17. [ 351.101545@0] wlan: loading driver v4.5.10.016
  18. [ 351.106148@0] hifDeviceInserted: Dumping clocks (50000000,200000000)
  19. [ 351.112218@0] Decrease host clock from 50000000 to 200000000(50000000,200000000)
  20. [ 351.119576@0] HIFDumpCCCR 0(43) 1(3) 2(0) 3(0) 4(0) 5(0) 6(0) 7(6) 8(17) 9(0) A(10) B(0) C(0) D(0) E(0) F(0) 10(0) 11(0) 12(1) 13(7) 14(7) 15(37) 16(1)
  21. [ 351.133069@0] host caps:0x0007810F, card_sd3_bus_mode:0x0000001C
  22. [ 351.139061@0] hifDeviceInserted: Set MMC bus mode to SDR104.
  23. [ 351.144828@0] AR6000: Set async interrupt delay clock as 2.
  24. [ 351.151686@0] ath_hif_sdio: HIF (Atheros/multi-bss)
  25. [ 351.151729@3] ------------[ cut here ]------------
  26. [ 351.151750@3] WARNING: CPU: 3 PID: 2793 at fs/proc/generic.c:315 proc_register+0xc0/0x188()
  27. [ 351.151752@3] proc_dir_entry '/proc/cld' already registered
  28. [ 351.151774@3] Modules linked in: wlan(O+) 8021q cfg80211(O) compat(O) wifi_dummy mali aml_nftl_dev(P) fbcon bitblit softcursor font
  29. [ 351.151782@3] CPU: 3 PID: 2793 Comm: AR6K startup Tainted: P D O 3.14.29 #1
  30. [ 351.151785@3] Call trace:
  31. [ 351.151794@3] [<ffffffc001087a78>] dump_backtrace+0x0/0x130
  32. [ 351.151798@3] [<ffffffc001087bc8>] show_stack+0x20/0x30
  33. [ 351.151807@3] [<ffffffc0017c167c>] dump_stack+0x78/0x94
  34. [ 351.151814@3] [<ffffffc00109430c>] warn_slowpath_common+0x94/0xc0
  35. [ 351.151818@3] [<ffffffc001094398>] warn_slowpath_fmt+0x60/0x78
  36. [ 351.151821@3] [<ffffffc0011efe6c>] proc_register+0xbc/0x188
  37. [ 351.151825@3] [<ffffffc0011f004c>] proc_mkdir_data+0x5c/0x88
  38. [ 351.151828@3] [<ffffffc0011f00ec>] proc_mkdir+0x2c/0x40
  39. [ 351.151963@3] [<ffffffbffc876850>] athdiag_procfs_init+0x30/0xd8 [wlan]
  40. [ 351.152055@3] [<ffffffbffc87a52c>] hif_register_tbl_attach+0x3c4/0x558 [wlan]
  41. [ 351.152134@3] [<ffffffbffc87ae50>] hif_pm_runtime_put+0x2a8/0xb70 [wlan]
  42. [ 351.152143@3] [<ffffffc0010b8d8c>] kthread+0xd4/0xf0
  43. [ 351.152147@3] ---[ end trace 1714b7f02612c900 ]---
  44. [ 351.152159@3] /proc/cld/athdiagpfs created
  45. [ 351.153572@3] wlan: [2793:E :HDD] wlan_hdd_cfg80211_init: wiphy->bands[i] is NULL, i = 2
  46. [ 351.281653@3] AR6000: configuration opcode 3 is not used for Linux SDIO stack
  47. [ 351.289113@3] NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0
  48. [ 351.294718@3] crystal_freq: 48000000Hz
  49. [ 351.298034@3] Step 1a: 66666
  50. [ 351.302705@3] Step 1b: 6AAA8
  51. [ 351.304222@3] Step 2a: 400
  52. [ 351.307407@3] Step 2b: 160
  53. [ 351.310481@3] Step 3a: 0
  54. [ 351.313612@3] Step 3b: 1
  55. [ 351.316763@3] Step 5a: 11458
  56. [ 351.319968@3] Step 5b: 5000E
  57. [ 351.322975@3] Step 7a: 5000E
  58. [ 351.326031@3] Step 7b: 4000E
  59. [ 351.329247@3] Step 9a: 3
  60. [ 351.332217@3] Step 9b: 1
  61. [ 351.335241@3] Step 10a: 4000E
  62. [ 351.338516@3] Step 10b: E
  63. [ 351.344228@1] Board extended Data download address: 0x0
  64. [ 351.362159@1] wlan: [2793:E :VOS] ol_transfer_bin_file: transferring file: bdwlan30.bin size 8124 bytes done!
  65. [ 351.366473@1] ol_download_firmware: Using 0x1234 for the remainder of init
  66. [ 351.414011@1] wlan: [2793:E :VOS] ol_transfer_bin_file: transferring file: otp30.bin size 23773 bytes done!
  67. [ 351.418761@1] ol_transfer_bin_file: Loading setup file qsetup30.bin
  68. [ 351.424344@1] android_readwrite_file: file /lib/firmware/qca9377/qsetup30.bin filp_open error
  69. [ 351.432782@1] ol_transfer_bin_file: Failed to get qsetup30.bin
  70. [ 352.508542@1] wlan: [2793:E :VOS] ol_transfer_bin_file: transferring file: qwlan30.bin size 592500 bytes done!
  71. [ 352.515185@1] +HTCCreate .. HIF :ffffffc0640c8000
  72. [ 352.517967@1] HIF Interrupt processing is SYNC ONLY
  73. [ 352.522615@1] AR6000: configuration opcode 7 is only used for RTOS systems, not Linux systems
  74. [ 352.531111@1] AR6000: configuration opcode 5 is not used for Linux SDIO stack
  75. [ 352.538657@1] -HTCCreate (0xffffffc063ccd000)
  76. [ 352.542746@1] WDA_open-4566: WMA --> wmi_unified_attach - success
  77. [ 352.548714@1] ol_if_dfs_attach: called; ptr=ffffffc054b19b54, radar_info=ffffffc06504bb68
  78. [ 352.557115@1] wlan: [2793:E :SAP] dfs_init_radar_filters[201]: Unknown dfs domain 0
  79. [ 352.564625@1] +HWT
  80. [ 352.566736@3] Target Ready! : transmit resources : 3 size:1792, MaxMsgsPerHTCBundle = 32
  81. [ 352.574478@3] HTC Service Index : 1 TX : 0x100 : alloc:3
  82. [ 352.579807@3] HTC Service:0x0001, ULpipe:1 DLpipe:0 id:0 Ready
  83. [ 352.585575@3] -HWT
  84. [ 352.587640@0] MAILBOX SWAP Service is enabled!
  85. [ 352.591998@0] Reduced Tx Complete service is enabled!
  86. [ 352.598132@0] is_full_reorder_offloaded? 0
  87. [ 352.601050@0] HTC Service TX : 0x300 : allocation is zero!
  88. [ 352.607740@3] HTC Service:0x0300, ULpipe:1 DLpipe:0 id:1 Ready
  89. [ 352.612308@3] HTC Service:0x0300 ep:1 TX flow control disabled
  90. [ 352.618167@3] htt_tx_attach:htt_desc_start:0xffffffc053c80000 htt_desc_end:0xffffffc053c9c200
  91. [ 352.627273@3] HTC Service:0x0100, ULpipe:3 DLpipe:2 id:2 Ready
  92. [ 352.632367@3] wma_pre_start-4928: WMA --> wmi_unified_connect_htc_service - success
  93. [ 352.639977@0] wma_mc_process_msg-21188: McThread: WNI_CFG_DNLD_REQ
  94. [ 352.646695@3] HTC using TX credit flow control
  95. [ 352.650783@3] wmitlv_check_and_pad_tlvs: WARN: TLV truncated. tlv_size_diff=24, curr_tlv_len=132
  96. [ 352.659154@3] __wmi_control_rx: WMI UNIFIED SERVICE READY event
  97. [ 352.665008@3] wma_rx_service_ready_event-23912: WMA <-- WMI_SERVICE_READY_EVENTID
  98. [ 352.672441@3] wlan: [20:E :WDA] wma_rx_service_ready_event: Firmware build version : 0000030a
  99. [ 352.680910@3] wlan: [20:E :WDA] wma_rx_service_ready_event: Board version: 0.22014009
  100. [ 352.688662@3] wma_rx_service_ready_event-24027: WMA --> WMI_INIT_CMDID
  101. [ 352.701885@3] __wmi_control_rx: WMI UNIFIED READY event
  102. [ 352.701920@3] wma_rx_ready_event-24056: WMA <-- WMI_READY_EVENTID
  103. [ 352.707665@0] ------------[ cut here ]------------
  104. [ 352.712402@0] WARNING: CPU: 0 PID: 2793 at /home/kszaq/ocz/LibreELEC.tv/build.LibreELEC-S905.aarch64-7.0.2.009/qca9377-aml-8b729b7/AIO/drivers/backports/net/wireless/reg.c:1388 wiphy_apply_custom_regulatory+0x1c8/0x208 [cfg80211]()
  105. [ 352.732769@0] wiphy should have REGULATORY_CUSTOM_REG
  106. [ 352.737725@0] Modules linked in: wlan(O+) 8021q cfg80211(O) compat(O) wifi_dummy mali aml_nftl_dev(P) fbcon bitblit softcursor font
  107. [ 352.749443@0] CPU: 0 PID: 2793 Comm: AR6K startup Tainted: P D W O 3.14.29 #1
  108. [ 352.757027@0] Call trace:
  109. [ 352.759635@0] [<ffffffc001087a78>] dump_backtrace+0x0/0x130
  110. [ 352.765147@0] [<ffffffc001087bc8>] show_stack+0x20/0x30
  111. [ 352.770368@0] [<ffffffc0017c167c>] dump_stack+0x78/0x94
  112. [ 352.775495@0] [<ffffffc00109430c>] warn_slowpath_common+0x94/0xc0
  113. [ 352.781547@0] [<ffffffc001094398>] warn_slowpath_fmt+0x60/0x78
  114. [ 352.787352@0] [<ffffffbffc0872bc>] wiphy_apply_custom_regulatory+0x1c4/0x208 [cfg80211]
  115. [ 352.795334@0] [<ffffffbffc81bee8>] vos_init_wiphy_from_eeprom+0xb8/0x298 [wlan]
  116. [ 352.802594@0] [<ffffffbffc6ca178>] hdd_wlan_startup+0x7a0/0x1178 [wlan]
  117. [ 352.809134@0] [<ffffffbffc87a53c>] hif_register_tbl_attach+0x3d4/0x558 [wlan]
  118. [ 352.816230@0] [<ffffffbffc87ae50>] hif_pm_runtime_put+0x2a8/0xb70 [wlan]
  119. [ 352.822775@0] [<ffffffc0010b8d8c>] kthread+0xd4/0xf0
  120. [ 352.827667@0] ---[ end trace 1714b7f02612c901 ]---
  121. [ 352.832484@0] wlan: [2793:E :VOS] error: wiphy->bands is NULL, i = 2
  122. [ 352.839013@0] wlan: [2793:E :VOS] error: wiphy->bands is NULL, i = 2
  123. [ 352.845403@0] wlan: [2793:E :PMC] PMC: Cannot enable BMPS timer. BMPS is disabled
  124. [ 352.852696@0] wlan: [2793:E :SME] csr_init_chan_list: 326: init time country code 00
  125. [ 352.860650@0] wlan: [2793:E :WDA] MCC TX Pause Event Handler register
  126. [ 352.866531@0] wlan: [2793:E :WDA] Target does not support batch scan feature
  127. [ 352.873943@0] session id - 0, AddSta session - 0
  128. [ 352.878111@3] target uses HTT version 3.27; host uses 3.9
  129. [ 352.878132@2] wlan: [2797:E :WDA] wma_unified_vdev_create_send: ID = 0 VAP Addr = 74:c6:3b:fe:7a:55
  130. [ 352.878170@2] wma_vdev_attach-5777: vdev_id 0, txrx_vdev_handle = ffffffc06400d600
  131. [ 352.878271@0] wlan: [2793:E :HDD] wlan_hdd_tdls_init TDLS Implicit trigger not enabled!
  132. [ 352.907850@3] *** Warning: host/target HTT versions are different, though compatible!
  133. [ 352.919961@2] wlan: [2797:E :WDA] Invalid wda_cli_set pdev command/Not yet implemented 0x34
  134. [ 352.919965@0] session id - 1, AddSta session - 0
  135. [ 352.920982@0] wlan: [2486:E :HDD] wlan_hdd_validate_context: Unloading/Loading in Progress. Ignore!!!
  136. [ 352.920994@0] wlan: [2486:E :HDD] hdd_open: 7651: HDD context is not valid
  137. [ 352.946505@0] wlan: [2797:E :WDA] wma_unified_vdev_create_send: ID = 1 VAP Addr = 76:c6:3b:7e:7a:55
  138. [ 352.954203@0] wma_vdev_attach-5777: vdev_id 1, txrx_vdev_handle = ffffffc064291c00
  139. [ 352.960904@0] wma_vdev_attach-5843: P2P Device: creating self peer 76:c6:3b:7e:7a:55, vdev_id 1
  140. [ 352.969696@3] wlan: [2797:E :WDA] wma_create_peer: Created peer with peer_addr 76:c6:3b:7e:7a:55 vdev_id 1, peer_count - 1
  141. [ 352.980557@3] TXRX: ol_txrx_peer_find_add_id: Delete Peer ffffffc05cc58000
  142. [ 352.989278@3] wlan: [2797:E :WDA] Invalid wda_cli_set pdev command/Not yet implemented 0x34
  143. [ 352.993037@0] Host SW:4.5.10.016, FW:0.0.0.778, HW:QCA9377_REV1_1
  144. [ 352.993135@0] wlan_logging_sock_activate_svc: Initalizing FEConsoleLog = 0 NumBuff = 32
  145. [ 352.993317@0] wlan_logging_sock_activate_svc: Activated wlan_logging svc
  146. [ 352.993485@0] wlan: driver loaded
  147. [ 353.019494@3] wlan: [2797:E :WDA] TM sending the following to firmware: min 0 max 110 enable 1
  148. [ 353.027972@3] wlan: [2797:E :WDA] TM Sending thermal mgmt cmd: low temp 0, upper temp 110, enabled 1
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!