Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- 17:35.044 com2 -- Transport opened
- com2@115200nfc
- 17:35.058 com2 -- Protocol set to HCI @ 115200 nfc
- com2@115200nfc
- 17:47.452 com2 c> Reset
- HCI Command
- com2@115200nfc
- [03 0C 00]
- opcode = 0xC03 (3075, "Reset")
- 17:47.454 com2 <c Reset
- HCI Command Complete Event
- com2@115200nfc
- [0E 04]: 01 03 0C 00
- event = 0xE (14, "Command Complete")
- Num_HCI_Command_Packets = 0x1 (1)
- Command_Opcode = 0xC03 (3075, "Reset")
- Status = 0x0 (0, "Success")
- 19:17.804 com2 c> Read_PIN_Type
- HCI Command
- com2@115200nfc
- [09 0C 00]
- opcode = 0xC09 (3081, "Read_PIN_Type")
- 19:17.807 com2 <c Read_PIN_Type PIN_Type: Variable PIN
- HCI Command Complete Event
- com2@115200nfc
- [0E 05]: 01 09 0C 00 00
- event = 0xE (14, "Command Complete")
- Num_HCI_Command_Packets = 0x1 (1)
- Command_Opcode = 0xC09 (3081, "Read_PIN_Type")
- Status = 0x0 (0, "Success")
- PIN_Type = 0x0 (0, "Variable PIN")
- 19:38.284 com2 c> Read_Class_of_Device
- HCI Command
- com2@115200nfc
- [23 0C 00]
- opcode = 0xC23 (3107, "Read_Class_of_Device")
- 19:38.287 com2 <c Read_Class_of_Device Class_Of_Device: 0x0
- HCI Command Complete Event
- com2@115200nfc
- [0E 07]: 01 23 0C 00 00 00 00
- event = 0xE (14, "Command Complete")
- Num_HCI_Command_Packets = 0x1 (1)
- Command_Opcode = 0xC23 (3107, "Read_Class_of_Device")
- Status = 0x0 (0, "Success")
- Class_Of_Device = 0x0 (0)
- 19:56.924 com2 c> Read_BD_ADDR
- HCI Command
- com2@115200nfc
- [09 10 00]
- opcode = 0x1009 (4105, "Read_BD_ADDR")
- 19:56.928 com2 <c Read_BD_ADDR BD_ADDR: A4D55574799A
- HCI Command Complete Event
- com2@115200nfc
- [0E 0A]: 01 09 10 00 9A 79 74 55 D5 A4
- event = 0xE (14, "Command Complete")
- Num_HCI_Command_Packets = 0x1 (1)
- Command_Opcode = 0x1009 (4105, "Read_BD_ADDR")
- Status = 0x0 (0, "Success")
- BD_ADDR = "A4D55574799A"
- 21:19.060 com2 c> Read_Country_Code
- HCI Command
- com2@115200nfc
- [07 10 00]
- opcode = 0x1007 (4103, "Read_Country_Code")
- 21:19.062 com2 <c Read_Country_Code Status=Unknown HCI Command
- HCI Command Complete Event
- com2@115200nfc
- [0E 04]: 01 07 10 01
- event = 0xE (14, "Command Complete")
- Num_HCI_Command_Packets = 0x1 (1)
- Command_Opcode = 0x1007 (4103, "Read_Country_Code")
- Status = 0x1 (1, "Unknown HCI Command")
- 21:23.419 com2 c> Read_Buffer_Size
- HCI Command
- com2@115200nfc
- [05 10 00]
- opcode = 0x1005 (4101, "Read_Buffer_Size")
- 21:23.424 com2 <c Read_Buffer_Size HC_ACL_Data_Packet_Length: 0x153
- HCI Command Complete Event
- com2@115200nfc
- [0E 0B]: 01 05 10 00 53 01 40 05 00 01 00
- event = 0xE (14, "Command Complete")
- Num_HCI_Command_Packets = 0x1 (1)
- Command_Opcode = 0x1005 (4101, "Read_Buffer_Size")
- Status = 0x0 (0, "Success")
- HC_ACL_Data_Packet_Length = 0x153 (339)
- HC_Synchronous_Data_Packet_Length = 0x40 (64)
- HC_Total_Num_ACL_Data_Packets = 0x5 (5)
- HC_Total_Num_Synchronous_Data_Packets = 0x1 (1)
- 21:23.424 com2 -- Write credits = 0x5 (Read_Buffer_Size completed)
- com2@115200nfc
- 21:44.923 com2 c> Read_Local_Version_Information
- HCI Command
- com2@115200nfc
- [01 10 00]
- opcode = 0x1001 (4097, "Read_Local_Version_Information")
- 21:44.927 com2 <c Read_Local_Version_Information HCI_Version: Bluetooth HCI Specification 3.0
- HCI Command Complete Event
- com2@115200nfc
- [0E 0C]: 01 01 10 00 05 00 00 05 0F 00 11 22
- event = 0xE (14, "Command Complete")
- Num_HCI_Command_Packets = 0x1 (1)
- Command_Opcode = 0x1001 (4097, "Read_Local_Version_Information")
- Status = 0x0 (0, "Success")
- HCI_Version = 0x5 (5, "Bluetooth HCI Specification 3.0")
- HCI_Revision = 0x0 (0)
- LMP_Version = 0x5 (5, "Bluetooth LMP 3.0")
- Manufacturer_Name = 0xF (15, "Broadcom Corporation")
- LMP_Subversion = 0x2211 (8721)
- 21:50.251 com2 c> Read_Local_Supported_Commands
- HCI Command
- com2@115200nfc
- [02 10 00]
- opcode = 0x1002 (4098, "Read_Local_Supported_Commands")
- 21:50.258 com2 <c Read_Local_Supported_Commands Supported_Commands[0]: Inquiry | Inquiry Cancel | Periodic Inquiry Mode | Exit Periodic Inquiry Mode | Create Connection | Disconnect | Create Connection Cancel
- HCI Command Complete Event
- com2@115200nfc
- [0E 44]:
- 01 02 10 00 BF FF FF 03 CC FF EF FF FF F3 E4 1F F2 0F E8 FE 07 F7 8F FF 1C 00 00 00 01 00 00 00
- 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- 00 00 00 00
- event = 0xE (14, "Command Complete")
- Num_HCI_Command_Packets = 0x1 (1)
- Command_Opcode = 0x1002 (4098, "Read_Local_Supported_Commands")
- Status = 0x0 (0, "Success")
- Supported_Commands[0] = 0xBF (191, "Inquiry | Inquiry Cancel | Periodic Inquiry Mode | Exit Periodic Inquiry Mode | Create Connection | Disconnect | Create Connection Cancel")
- Supported_Commands[1] = 0xFF (255, "Accept Connection Request | Reject Connection Request | Link Key Request Reply | Link Key Request Negative Reply | PIN Code Request Reply | PIN Code Request Negative Reply | Change Connection Packet Type | Authentication Request")
- Supported_Commands[2] = 0xFF (255, "Set Connection Encryption | Change Connection Link Key | Master Link Key | Remote Name Request | Cancel Remote Name Request | Read Remote Supported Features | Read Remote Extended Features | Read Remote Version Information")
- Supported_Commands[3] = 0x3 (3, "Read Clock Offset | Read LMP Handle")
- Supported_Commands[4] = 0xCC (204, "Sniff Mode | Exit Sniff Mode | QoS Setup | Role Discovery")
- Supported_Commands[5] = 0xFF (255, "Switch Role | Read Link Policy Settings | Write Link Policy Settings | Read Default Link Policy Settings | Write Default Link Policy Settings | Flow Specification | Set Event Mark | Reset")
- Supported_Commands[6] = 0xEF (239, "Set Event Filter | Flush | Read PIN Type | Write PIN Type | Read Stored Link Key | Write Stored Link Key | Delete Stored Link Key")
- Supported_Commands[7] = 0xFF (255, "Write Local Name | Read Local Name | Read Connection Accept Timeout | Write Connection Accept Timeout | Read Page Timeout | Write Page Timeout | Read Scan Enable | Write Scan Enable")
- Supported_Commands[8] = 0xFF (255, "Read Page Scan Activity | Write Page Scan Activity | Read Inquiry Scan Activity | Write Inquiry Scan Activity | Read Authentication Enable | Write Authentication Enable | Read Encryption Mode | Write Encryption Mode")
- Supported_Commands[9] = 0xF3 (243, "Read Class of Device | Write Class of Device | Read Automatic Flush Timeout | Write Automatic Flush Timeout | Read Num Broadcast Retransmissions | Write Num Broadcast Retransmissions")
- Supported_Commands[10] = 0xE4 (228, "Read Transmit Power Level | Set Host Controller To Host Flow Control | Host Buffer Size | Host Number Of Completed Packets")
- Supported_Commands[11] = 0x1F (31, "Read Link Supervision Timeout | Write Link Supervision Timeout | Read Number Of Supported IAC | Read Current IAC LAP | Write Current IAC LAP")
- Supported_Commands[12] = 0xF2 (242, "Set AFH Channel Classification | Read Inquiry Scan Type | Write Inquiry Scan Type | Read Inquiry Mode | Write Inquiry Mode")
- Supported_Commands[13] = 0xF (15, "Read Page Scan Type | Write Page Scan Type | Read AFH Channel Assessment Mode | Write AFH Channel Assessment Mode")
- Supported_Commands[14] = 0xE8 (232, "Read Local Version Information | Read Local Supported Features | Read Local Extended Features | Read Buffer Size")
- Supported_Commands[15] = 0xFE (254, "Read BD ADDR | Read Failed Contact Counter | Reset Failed Contact Counter | Get Link Quality | Read RSSI | Read AFH Channel Map | Read BD Clock")
- Supported_Commands[16] = 0x7 (7, "Read Loopback Mode | Write Loopback Mode | Enable Device Under Test Mode")
- Supported_Commands[17] = 0xF7 (247, "Read Extended Inquiry Response | Write Extended Inquiry Response | Refresh Encryption Key | Sniff Subrating | Read Simple Pairing Mode | Write Simple Pairing Mode | Read Local OOB Data")
- Supported_Commands[18] = 0x8F (143, "Read Inquiry Transmit Power Level | Write Inquiry Transmit Power Level | Read Default Erroneous Data Reporting | Write Default Erroneous Data Reporting | IO Capability Response")
- Supported_Commands[19] = 0xFF (255, "User Confirmation Request Reply Command | User Confirmation Request Negative Reply Command | User Passkey Request Reply Command | User Passkey Request Negative Reply Command | Remote OOB Data Request Reply Command | Write Simple Pairing Debug Mode Command | Enhanced Flush | Remote OOB Data Request Negative Reply Command")
- Supported_Commands[20] = 0x1C (28, "Send Keypress Notification Command | IO Capabilities Response Negative Reply | Read Encryption Key Size")
- Supported_Commands[24] = 0x1 (1, "Read Enhanced Transmit Power Level")
- Supported_Commands[25] = 0x0 (0, "")
- Supported_Commands[26] = 0x0 (0, "")
- Supported_Commands[27] = 0x0 (0, "")
- Supported_Commands[28] = 0x0 (0, "")
- 22:02.899 com2 c> Read_Local_Supported_Features
- HCI Command
- com2@115200nfc
- [03 10 00]
- opcode = 0x1003 (4099, "Read_Local_Supported_Features")
- 22:02.903 com2 <c Read_Local_Supported_Features LMP_Features: 3-slot packets | 5-slot packets | Encryption | Slot offset | Timing accuracy | Switch | Sniff mode | Power control requests | Channel quality driven data rate | Paging scheme | Power control | Broadcast encryption | Enhanced inquiry scan | Interlaced inquiry scan | Interlaced page scan | RSSI with inquiry results
- HCI Command Complete Event
- com2@115200nfc
- [0E 0C]: 01 03 10 00 BF 06 86 78 18 1E 79 87
- event = 0xE (14, "Command Complete")
- Num_HCI_Command_Packets = 0x1 (1)
- Command_Opcode = 0x1003 (4099, "Read_Local_Supported_Features")
- Status = 0x0 (0, "Success")
- LMP_Features = 0x788606BF (2022049471, "3-slot packets | 5-slot packets | Encryption | Slot offset | Timing accuracy | Switch | Sniff mode | Power control requests | Channel quality driven data rate | Paging scheme | Power control | Broadcast encryption | Enhanced inquiry scan | Interlaced inquiry scan | Interlaced page scan | RSSI with inquiry results")
- LMP_Features (63:32) = 0x87791E18 (2272861720, "AFH capable slave | AFH classification slave | Sniff subrating | Pause Encryption | AFH capable master | AFH classification master | Extended inquiry response | Secure Simple Pairing | Encapsulated PDU | Erroneous Data Reporting | Non-flushable Packet Boundary Flag | Link Supervision Timeout Changed Event | Inquiry Response Tx Power Level | Enhanced Power Control | Extended features")
- 22:50.779 com2 c> Read_Local_Name
- HCI Command
- com2@115200nfc
- [14 0C 00]
- opcode = 0xC14 (3092, "Read_Local_Name")
- 22:50.802 com2 <c Read_Local_Name Name: BCM20730B
- HCI Command Complete Event
- com2@115200nfc
- [0E FC]:
- 01 14 0C 00 42 43 4D 32 30 37 33 30 42 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- event = 0xE (14, "Command Complete")
- Num_HCI_Command_Packets = 0x1 (1)
- Command_Opcode = 0xC14 (3092, "Read_Local_Name")
- Status = 0x0 (0, "Success")
- Name = "BCM20730B"
- 23:29.706 com2 c> Read_Connection_Accept_Timeout
- HCI Command
- com2@115200nfc
- [15 0C 00]
- opcode = 0xC15 (3093, "Read_Connection_Accept_Timeout")
- 23:29.709 com2 <c Read_Connection_Accept_Timeout Conn_Accept_Timeout: 0x1FA0
- HCI Command Complete Event
- com2@115200nfc
- [0E 06]: 01 15 0C 00 A0 1F
- event = 0xE (14, "Command Complete")
- Num_HCI_Command_Packets = 0x1 (1)
- Command_Opcode = 0xC15 (3093, "Read_Connection_Accept_Timeout")
- Status = 0x0 (0, "Success")
- Conn_Accept_Timeout = 0x1FA0 (8096, slots)
- 23:37.898 com2 c> Read_Authentication_Enable
- HCI Command
- com2@115200nfc
- [1F 0C 00]
- opcode = 0xC1F (3103, "Read_Authentication_Enable")
- 23:37.900 com2 <c Read_Authentication_Enable Authentication_Enable: 0x0
- HCI Command Complete Event
- com2@115200nfc
- [0E 05]: 01 1F 0C 00 00
- event = 0xE (14, "Command Complete")
- Num_HCI_Command_Packets = 0x1 (1)
- Command_Opcode = 0xC1F (3103, "Read_Authentication_Enable")
- Status = 0x0 (0, "Success")
- Authentication_Enable = 0x0 (0)
- 23:42.139 com2 c> Read_Encryption_Mode
- HCI Command
- com2@115200nfc
- [21 0C 00]
- opcode = 0xC21 (3105, "Read_Encryption_Mode")
- 23:42.141 com2 <c Read_Encryption_Mode Encryption_Mode: Encryption disabled
- HCI Command Complete Event
- com2@115200nfc
- [0E 05]: 01 21 0C 00 00
- event = 0xE (14, "Command Complete")
- Num_HCI_Command_Packets = 0x1 (1)
- Command_Opcode = 0xC21 (3105, "Read_Encryption_Mode")
- Status = 0x0 (0, "Success")
- Encryption_Mode = 0x0 (0, "Encryption disabled")
- 23:46.954 com2 c> Read_Voice_Setting
- HCI Command
- com2@115200nfc
- [25 0C 00]
- opcode = 0xC25 (3109, "Read_Voice_Setting")
- 23:46.957 com2 <c Read_Voice_Setting Status=Unknown HCI Command
- HCI Command Complete Event
- com2@115200nfc
- [0E 04]: 01 25 0C 01
- event = 0xE (14, "Command Complete")
- Num_HCI_Command_Packets = 0x1 (1)
- Command_Opcode = 0xC25 (3109, "Read_Voice_Setting")
- Status = 0x1 (1, "Unknown HCI Command")
- 23:58.019 com2 c> Read_Simple_Pairing_Mode
- HCI Command
- com2@115200nfc
- [55 0C 00]
- opcode = 0xC55 (3157, "Read_Simple_Pairing_Mode")
- 23:58.020 com2 <c Read_Simple_Pairing_Mode Simple_Pairing_Mode: Simple pairing not set
- HCI Command Complete Event
- com2@115200nfc
- [0E 05]: 01 55 0C 00 00
- event = 0xE (14, "Command Complete")
- Num_HCI_Command_Packets = 0x1 (1)
- Command_Opcode = 0xC55 (3157, "Read_Simple_Pairing_Mode")
- Status = 0x0 (0, "Success")
- Simple_Pairing_Mode = 0x0 (0, "Simple pairing not set")
- 24:06.466 com2 c> Read_LE_Host_Support
- HCI Command
- com2@115200nfc
- [6C 0C 00]
- opcode = 0xC6C (3180, "Read_LE_Host_Support")
- 24:06.468 com2 <c Read_LE_Host_Support Status=Unknown HCI Command
- HCI Command Complete Event
- com2@115200nfc
- [0E 04]: 01 6C 0C 01
- event = 0xE (14, "Command Complete")
- Num_HCI_Command_Packets = 0x1 (1)
- Command_Opcode = 0xC6C (3180, "Read_LE_Host_Support")
- Status = 0x1 (1, "Unknown HCI Command")
- 24:25.338 com2 c> Enable_Device_Under_Test_Mode
- HCI Command
- com2@115200nfc
- [03 18 00]
- opcode = 0x1803 (6147, "Enable_Device_Under_Test_Mode")
- 24:25.340 com2 <c Enable_Device_Under_Test_Mode
- HCI Command Complete Event
- com2@115200nfc
- [0E 04]: 01 03 18 00
- event = 0xE (14, "Command Complete")
- Num_HCI_Command_Packets = 0x1 (1)
- Command_Opcode = 0x1803 (6147, "Enable_Device_Under_Test_Mode")
- Status = 0x0 (0, "Success")
- 24:50.669 com2 c> GPIO_Read GPIO_Pin_Number: 0x1
- HCI Command
- com2@115200nfc
- [1A FC 01]: 01
- opcode = 0xFC1A (64538, "GPIO_Read")
- GPIO_Pin_Number = 0x1 (1)
- 24:50.671 com2 <c GPIO_Read GPIO_Pin_Number: 0x1
- HCI Command Complete Event
- com2@115200nfc
- [0E 06]: 01 1A FC 00 01 01
- event = 0xE (14, "Command Complete")
- Num_HCI_Command_Packets = 0x1 (1)
- Command_Opcode = 0xFC1A (64538, "GPIO_Read")
- Status = 0x0 (0, "Success")
- GPIO_Pin_Number = 0x1 (1)
- GPIO_Value = 0x1 (1, "High")
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement