Advertisement
Guest User

smartctl -a /dev/sda

a guest
Aug 23rd, 2016
118
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 5.20 KB | None | 0 0
  1. Model Family: Western Digital Red (AF)
  2. Device Model: WDC WD40EFRX-68WT0N0
  3. Serial Number: [REDACTED]
  4. LU WWN Device Id: 5 0014ee 2b5bc03dd
  5. Firmware Version: 82.00A82
  6. User Capacity: 4,000,787,030,016 bytes [4.00 TB]
  7. Sector Sizes: 512 bytes logical, 4096 bytes physical
  8. Rotation Rate: 5400 rpm
  9. Device is: In smartctl database [for details use: -P show]
  10. ATA Version is: ACS-2 (minor revision not indicated)
  11. SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
  12. Local Time is: Tue Aug 23 21:50:22 2016 ART
  13. SMART support is: Available - device has SMART capability.
  14. SMART support is: Enabled
  15.  
  16. === START OF READ SMART DATA SECTION ===
  17. SMART overall-health self-assessment test result: PASSED
  18.  
  19. General SMART Values:
  20. Offline data collection status: (0x00) Offline data collection activity
  21. was never started.
  22. Auto Offline Data Collection: Disabled.
  23. Self-test execution status: ( 0) The previous self-test routine completed
  24. without error or no self-test has ever
  25. been run.
  26. Total time to complete Offline
  27. data collection: (53460) seconds.
  28. Offline data collection
  29. capabilities: (0x7b) SMART execute Offline immediate.
  30. Auto Offline data collection on/off support.
  31. Suspend Offline collection upon new
  32. command.
  33. Offline surface scan supported.
  34. Self-test supported.
  35. Conveyance Self-test supported.
  36. Selective Self-test supported.
  37. SMART capabilities: (0x0003) Saves SMART data before entering
  38. power-saving mode.
  39. Supports SMART auto save timer.
  40. Error logging capability: (0x01) Error logging supported.
  41. General Purpose Logging supported.
  42. Short self-test routine
  43. recommended polling time: ( 2) minutes.
  44. Extended self-test routine
  45. recommended polling time: ( 534) minutes.
  46. Conveyance self-test routine
  47. recommended polling time: ( 5) minutes.
  48. SCT capabilities: (0x703d) SCT Status supported.
  49. SCT Error Recovery Control supported.
  50. SCT Feature Control supported.
  51. SCT Data Table supported.
  52.  
  53. SMART Attributes Data Structure revision number: 16
  54. Vendor Specific SMART Attributes with Thresholds:
  55. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  56. 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 5
  57. 3 Spin_Up_Time 0x0027 178 178 021 Pre-fail Always - 8091
  58. 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 196
  59. 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
  60. 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
  61. 9 Power_On_Hours 0x0032 081 081 000 Old_age Always - 14129
  62. 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
  63. 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
  64. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 132
  65. 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 38
  66. 193 Load_Cycle_Count 0x0032 199 199 000 Old_age Always - 4636
  67. 194 Temperature_Celsius 0x0022 121 103 000 Old_age Always - 31
  68. 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
  69. 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 1
  70. 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
  71. 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
  72. 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
  73.  
  74. SMART Error Log Version: 1
  75. No Errors Logged
  76.  
  77. SMART Self-test log structure revision number 1
  78. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  79. # 1 Short offline Completed: read failure 90% 13930 815329496
  80. # 2 Short offline Completed without error 00% 965 -
  81.  
  82. SMART Selective self-test log data structure revision number 1
  83. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  84. 1 0 0 Not_testing
  85. 2 0 0 Not_testing
  86. 3 0 0 Not_testing
  87. 4 0 0 Not_testing
  88. 5 0 0 Not_testing
  89. Selective self-test flags (0x0):
  90. After scanning selected spans, do NOT read-scan remainder of disk.
  91. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement