API tools faq
paste
Advertisement
Guest User

Untitled

a guest
May 31st, 2015
292
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 15.55 KB | None | 0 0
raw download clone embed print report
  1. root@Pineapple:~# dmesg
  2. [ 0.000000] Linux version 3.3.8 (sebkinne@buildtop) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #24 Sat Apr 25 18:41:08 CEST 2015
  3. [ 0.000000] MyLoader: sysp=97d936c9, boardp=61b798de, parts=6238a85e
  4. [ 0.000000] bootconsole [early0] enabled
  5. [ 0.000000] CPU revision is: 00019374 (MIPS 24Kc)
  6. [ 0.000000] SoC: Atheros AR9330 rev 1
  7. [ 0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
  8. [ 0.000000] Determined physical RAM map:
  9. [ 0.000000] memory: 04000000 @ 00000000 (usable)
  10. [ 0.000000] Initrd not found or empty - disabling initrd
  11. [ 0.000000] Zone PFN ranges:
  12. [ 0.000000] Normal 0x00000000 -> 0x00004000
  13. [ 0.000000] Movable zone start PFN for each node
  14. [ 0.000000] Early memory PFN ranges
  15. [ 0.000000] 0: 0x00000000 -> 0x00004000
  16. [ 0.000000] On node 0 totalpages: 16384
  17. [ 0.000000] free_area_init_node: node 0, pgdat 802d8470, node_mem_map 81000000
  18. [ 0.000000] Normal zone: 128 pages used for memmap
  19. [ 0.000000] Normal zone: 0 pages reserved
  20. [ 0.000000] Normal zone: 16256 pages, LIFO batch:3
  21. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  22. [ 0.000000] pcpu-alloc: [0] 0
  23. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
  24. [ 0.000000] Kernel command line: board=MK5 console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd
  25. [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
  26. [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  27. [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  28. [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  29. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
  30. [ 0.000000] Writing ErrCtl register=00000000
  31. [ 0.000000] Readback ErrCtl register=00000000
  32. [ 0.000000] Memory: 61592k/65536k available (2124k kernel code, 3944k reserved, 406k data, 212k init, 0k highmem)
  33. [ 0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  34. [ 0.000000] NR_IRQS:51
  35. [ 0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
  36. [ 0.080000] pid_max: default: 32768 minimum: 301
  37. [ 0.080000] Mount-cache hash table entries: 512
  38. [ 0.090000] NET: Registered protocol family 16
  39. [ 0.090000] gpiochip_add: registered GPIOs 0 to 29 on device: ath79
  40. [ 0.100000] MIPS: machine is MK5 V1.0
  41. [ 0.350000] bio: create slab <bio-0> at 0
  42. [ 0.360000] Switching to clocksource MIPS
  43. [ 0.360000] NET: Registered protocol family 2
  44. [ 0.370000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  45. [ 0.370000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
  46. [ 0.370000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
  47. [ 0.380000] TCP: Hash tables configured (established 2048 bind 2048)
  48. [ 0.390000] TCP reno registered
  49. [ 0.390000] UDP hash table entries: 256 (order: 0, 4096 bytes)
  50. [ 0.400000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  51. [ 0.400000] NET: Registered protocol family 1
  52. [ 0.410000] PCI: CLS 0 bytes, default 32
  53. [ 0.430000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  54. [ 0.430000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  55. [ 0.440000] msgmni has been set to 120
  56. [ 0.440000] io scheduler noop registered
  57. [ 0.450000] io scheduler deadline registered (default)
  58. [ 0.450000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
  59. [ 0.460000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11) is a AR933X UART
  60. [ 0.470000] console [ttyATH0] enabled, bootconsole disabled
  61. [ 0.480000] m25p80 spi0.0: found w25q128, expected m25p80
  62. [ 0.480000] m25p80 spi0.0: w25q128 (16384 Kbytes)
  63. [ 0.490000] 5 tp-link partitions found on MTD device spi0.0
  64. [ 0.490000] Creating 5 MTD partitions on "spi0.0":
  65. [ 0.500000] 0x000000000000-0x000000020000 : "u-boot"
  66. [ 0.510000] 0x000000020000-0x00000010278c : "kernel"
  67. [ 0.510000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  68. [ 0.520000] 0x00000010278c-0x000000ff0000 : "rootfs"
  69. [ 0.530000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  70. [ 0.540000] mtd: partition "rootfs" set to be root filesystem
  71. [ 0.550000] mtd: partition "rootfs_data" created automatically, ofs=CC0000, len=330000
  72. [ 0.550000] 0x000000cc0000-0x000000ff0000 : "rootfs_data"
  73. [ 0.560000] 0x000000ff0000-0x000001000000 : "art"
  74. [ 0.570000] 0x000000020000-0x000000ff0000 : "firmware"
  75. [ 0.590000] ag71xx_mdio: probed
  76. [ 0.590000] eth0: Atheros AG71xx at 0xb9000000, irq 4
  77. [ 1.150000] ag71xx ag71xx.0: eth0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
  78. [ 1.160000] TCP cubic registered
  79. [ 1.160000] NET: Registered protocol family 17
  80. [ 1.160000] Bridge firewalling registered
  81. [ 1.170000] 8021q: 802.1Q VLAN Support v1.8
  82. [ 1.180000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
  83. [ 1.190000] Freeing unused kernel memory: 212k freed
  84. [ 3.600000] Registered led device: mk5:red:wlan1
  85. [ 3.600000] Registered led device: mk5:blue:wlan0
  86. [ 3.600000] Registered led device: mk5:amber:lan
  87. [ 6.150000] eth0: link up (100Mbps/Full duplex)
  88. [ 6.910000] JFFS2 notice: (421) jffs2_build_xattr_subsystem: complete building xattr subsystem, 4 of xdatum (0 unchecked, 3 orphan) and 30 of xref (0 dead, 15 orphan) found.
  89. [ 7.880000] SCSI subsystem initialized
  90. [ 8.180000] usbcore: registered new interface driver usbfs
  91. [ 8.180000] usbcore: registered new interface driver hub
  92. [ 8.190000] usbcore: registered new device driver usb
  93. [ 8.730000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  94. [ 8.740000] ehci-platform ehci-platform: Generic Platform EHCI Controller
  95. [ 8.750000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
  96. [ 8.780000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
  97. [ 8.800000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
  98. [ 8.800000] hub 1-0:1.0: USB hub found
  99. [ 8.800000] hub 1-0:1.0: 1 port detected
  100. [ 8.910000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  101. [ 9.030000] uhci_hcd: USB Universal Host Controller Interface driver
  102. [ 9.160000] Initializing USB Mass Storage driver...
  103. [ 9.160000] usbcore: registered new interface driver usb-storage
  104. [ 9.170000] USB Mass Storage support registered.
  105. [ 9.210000] usb 1-1: new high-speed USB device number 2 using ehci-platform
  106. [ 9.360000] hub 1-1:1.0: USB hub found
  107. [ 9.360000] hub 1-1:1.0: 4 ports detected
  108. [ 9.640000] usb 1-1.4: new high-speed USB device number 3 using ehci-platform
  109. [ 9.770000] scsi0 : usb-storage 1-1.4:1.0
  110. [ 10.770000] scsi 0:0:0:0: Direct-Access Multi Flash Reader 1.00 PQ: 0 ANSI: 0
  111. [ 11.400000] sd 0:0:0:0: [sda] 3907584 512-byte logical blocks: (2.00 GB/1.86 GiB)
  112. [ 11.410000] sd 0:0:0:0: [sda] Write Protect is off
  113. [ 11.410000] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
  114. [ 11.410000] sd 0:0:0:0: [sda] No Caching mode page present
  115. [ 11.420000] sd 0:0:0:0: [sda] Assuming drive cache: write through
  116. [ 11.430000] sd 0:0:0:0: [sda] No Caching mode page present
  117. [ 11.430000] sd 0:0:0:0: [sda] Assuming drive cache: write through
  118. [ 11.440000] sda:
  119. [ 11.440000] sd 0:0:0:0: [sda] No Caching mode page present
  120. [ 11.450000] sd 0:0:0:0: [sda] Assuming drive cache: write through
  121. [ 11.450000] sd 0:0:0:0: [sda] Attached SCSI removable disk
  122. [ 29.590000] eth0: link down
  123. [ 33.090000] Loading modules backported from Linux version master-2014-01-23-0-g62c147d
  124. [ 33.090000] Backport generated by backports.git backports-20140124-0-g1256d3e
  125. [ 33.210000] cfg80211: Calling CRDA to update world regulatory domain
  126. [ 33.210000] cfg80211: World regulatory domain updated:
  127. [ 33.220000] cfg80211: DFS Master region: unset
  128. [ 33.220000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  129. [ 33.230000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  130. [ 33.240000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  131. [ 33.250000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  132. [ 33.260000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
  133. [ 33.260000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
  134. [ 33.270000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
  135. [ 34.800000] usbcore: registered new interface driver rt73usb
  136. [ 34.850000] ath: EEPROM regdomain: 0x0
  137. [ 34.850000] ath: EEPROM indicates default country code should be used
  138. [ 34.850000] ath: doing EEPROM country->regdmn map search
  139. [ 34.850000] ath: country maps to regdmn code: 0x3a
  140. [ 34.850000] ath: Country alpha2 being used: US
  141. [ 34.850000] ath: Regpair used: 0x3a
  142. [ 34.860000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  143. [ 34.870000] Registered led device: ath9k-phy0
  144. [ 34.870000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
  145. [ 34.880000] cfg80211: Calling CRDA for country: US
  146. [ 34.880000] cfg80211: Regulatory domain changed to country: US
  147. [ 34.880000] cfg80211: DFS Master region: FCC
  148. [ 34.890000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  149. [ 34.900000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  150. [ 34.900000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 1700 mBm)
  151. [ 34.910000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (300 mBi, 2400 mBm)
  152. [ 34.920000] cfg80211: (5490000 KHz - 5600000 KHz @ 80000 KHz), (300 mBi, 2400 mBm)
  153. [ 34.930000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2400 mBm)
  154. [ 34.940000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 3000 mBm)
  155. [ 34.940000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
  156. [ 34.970000] usbcore: registered new interface driver rtl8187
  157. [ 35.100000] Button Hotplug driver version 0.4.1
  158. [ 35.320000] RPC: Registered named UNIX socket transport module.
  159. [ 35.320000] RPC: Registered udp transport module.
  160. [ 35.330000] RPC: Registered tcp transport module.
  161. [ 35.330000] RPC: Registered tcp NFSv4.1 backchannel transport module.
  162. [ 35.660000] PPP generic driver version 2.4.2
  163. [ 35.690000] usbcore: registered new interface driver rt2800usb
  164. [ 35.820000] tun: Universal TUN/TAP device driver, 1.6
  165. [ 35.830000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  166. [ 36.180000] ip_tables: (C) 2000-2006 Netfilter Core Team
  167. [ 36.410000] NET: Registered protocol family 24
  168. [ 36.550000] nf_conntrack version 0.5.0 (965 buckets, 3860 max)
  169. [ 37.260000] xt_time: kernel timezone is -0000
  170. [ 37.790000] usbcore: registered new interface driver ath9k_htc
  171. [ 37.820000] usbcore: registered new interface driver cdc_acm
  172. [ 37.830000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  173. [ 38.050000] usbcore: registered new interface driver usbserial
  174. [ 38.060000] USB Serial support registered for generic
  175. [ 38.060000] usbcore: registered new interface driver usbserial_generic
  176. [ 38.070000] usbserial: USB Serial Driver core
  177. [ 38.210000] usbcore: registered new interface driver asix
  178. [ 38.280000] usbcore: registered new interface driver cdc_ether
  179. [ 38.520000] Error: Driver 'gpio-keys-polled' is already registered, aborting...
  180. [ 38.630000] usbcore: registered new interface driver rndis_host
  181. [ 38.740000] sd 0:0:0:0: Attached scsi generic sg0 type 0
  182. [ 38.770000] USB Serial support registered for GSM modem (1-port)
  183. [ 38.770000] usbcore: registered new interface driver option
  184. [ 38.780000] option: v0.7.2:USB Driver for GSM modems
  185. [ 38.800000] USB Serial support registered for pl2303
  186. [ 38.800000] usbcore: registered new interface driver pl2303
  187. [ 38.810000] pl2303: Prolific PL2303 USB to serial adaptor driver
  188. [ 48.670000] device eth0 entered promiscuous mode
  189. [ 48.800000] eth0: link up (100Mbps/Full duplex)
  190. [ 48.800000] br-lan: port 1(eth0) entered forwarding state
  191. [ 48.810000] br-lan: port 1(eth0) entered forwarding state
  192. [ 50.810000] br-lan: port 1(eth0) entered forwarding state
  193. [ 53.050000] device wlan0 entered promiscuous mode
  194. [ 53.110000] br-lan: port 2(wlan0) entered forwarding state
  195. [ 53.120000] br-lan: port 2(wlan0) entered forwarding state
  196. [ 55.120000] br-lan: port 2(wlan0) entered forwarding state
  197. root@Pineapple:~# lsusb
  198. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  199. Bus 001 Device 002: ID 058f:6254 Alcor Micro Corp. USB Hub
  200. Bus 001 Device 003: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader
  201. root@Pineapple:~# ifconfig -a
  202. br-lan Link encap:Ethernet HWaddr 00:13:37:A5:27:03
  203. inet addr:172.16.42.1 Bcast:172.16.42.255 Mask:255.255.255.0
  204. UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
  205. RX packets:1196 errors:0 dropped:7 overruns:0 frame:0
  206. TX packets:1147 errors:0 dropped:0 overruns:0 carrier:0
  207. collisions:0 txqueuelen:0
  208. RX bytes:287116 (280.3 KiB) TX bytes:324115 (316.5 KiB)
  209.  
  210. eth0 Link encap:Ethernet HWaddr 00:13:37:A5:27:03
  211. UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
  212. RX packets:1357 errors:0 dropped:3 overruns:0 frame:0
  213. TX packets:1201 errors:0 dropped:0 overruns:0 carrier:0
  214. collisions:0 txqueuelen:1000
  215. RX bytes:351394 (343.1 KiB) TX bytes:327432 (319.7 KiB)
  216. Interrupt:4
  217.  
  218. lo Link encap:Local Loopback
  219. inet addr:127.0.0.1 Mask:255.0.0.0
  220. UP LOOPBACK RUNNING MTU:16436 Metric:1
  221. RX packets:264 errors:0 dropped:0 overruns:0 frame:0
  222. TX packets:264 errors:0 dropped:0 overruns:0 carrier:0
  223. collisions:0 txqueuelen:0
  224. RX bytes:19752 (19.2 KiB) TX bytes:19752 (19.2 KiB)
  225.  
  226. wlan0 Link encap:Ethernet HWaddr 00:13:37:A5:27:03
  227. UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
  228. RX packets:53 errors:0 dropped:0 overruns:0 frame:0
  229. TX packets:93 errors:0 dropped:0 overruns:0 carrier:0
  230. collisions:0 txqueuelen:1000
  231. RX bytes:3297 (3.2 KiB) TX bytes:9682 (9.4 KiB)
  232.  
  233. root@Pineapple:~# cat /etc/config/wireless
  234. config wifi-device radio0
  235. option type mac80211
  236. option channel 11
  237. option hwmode 11ng
  238. option macaddr 00:13:37:a5:27:03
  239. option htmode HT20
  240. list ht_capab SHORT-GI-20
  241. list ht_capab SHORT-GI-40
  242. list ht_capab RX-STBC1
  243. list ht_capab DSSS_CCK-40
  244.  
  245. config wifi-iface
  246. option device radio0
  247. option network lan
  248. option mode ap
  249. option ssid Pineapple5_2703
  250. option hidden 0
  251. option encryption none
  252.  
  253. config wifi-iface
  254. option device radio0
  255. option network lan
  256. option mode ap
  257. option ssid Pineapple5_management
  258. option encryption psk2+ccmp
  259. option key 'pineapplesareyummy'
  260. option disabled 1
  261.  
  262.  
  263. config wifi-device radio1
  264. option type mac80211
  265. option channel 11
  266. option hwmode 11g
  267. option macaddr 00:13:37:93:59:19
  268.  
  269.  
  270. config wifi-iface
  271. option device radio1
  272. option network lan
  273. option mode sta
  274. option ssid Pineapple5_5919
  275. option hidden 0
  276. option encryption none
  277.  
  278.  
  279. root@Pineapple:~#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!