Advertisement
Guest User

dmesg LAN Failure

a guest
Feb 27th, 2015
423
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 32.09 KB | None | 0 0
  1. [ 0.000000] Booting Linux on physical CPU 0x0
  2. [ 0.000000] Linux version 3.18.7+ (root@xbian-dev) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-12ubuntu1) ) #1 PREEMPT Mon Feb 23 03:42:04 CET 2015
  3. [ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
  4. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  5. [ 0.000000] Machine: BCM2708
  6. [ 0.000000] cma: Reserved 16 MiB at 0x16000000
  7. [ 0.000000] Memory policy: Data cache writeback
  8. [ 0.000000] On node 0 totalpages: 94208
  9. [ 0.000000] free_area_init_node: node 0, pgdat c0703998, node_mem_map d5d10000
  10. [ 0.000000] Normal zone: 736 pages used for memmap
  11. [ 0.000000] Normal zone: 0 pages reserved
  12. [ 0.000000] Normal zone: 94208 pages, LIFO batch:31
  13. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  14. [ 0.000000] pcpu-alloc: [0] 0
  15. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 93472
  16. [ 0.000000] Kernel command line: selinux=0 dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1280 bcm2708_fb.fbheight=768 bcm2708.boardrev=0xd bcm2708.serial=0x90f7561f smsc95xx.macaddr=B8:27:EB:F7:56:1F bcm2708_fb.fbswap=1 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 telnet zswap.enabled=1 zswap.compressor=lz4 sdhci-bcm2708.sync_after_dma=0 dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootflags=subvol=root/@,thread_pool=2,autodefrag,compress=lz4,commit=120 rootfstype=btrfs rootwait smsc95xx.turbo_mode=N logo.nologo quiet noswap loglevel=0 mod_scsi.scan=sync partswap startevent=mountall splash nohdparm --startup-event mountall
  17. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  18. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  19. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  20. [ 0.000000] Memory: 344092K/376832K available (5324K kernel code, 233K rwdata, 1436K rodata, 156K init, 371K bss, 32740K reserved)
  21. [ 0.000000] Virtual kernel memory layout:
  22. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  23. [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB)
  24. [ 0.000000] vmalloc : 0xd7800000 - 0xff000000 ( 632 MB)
  25. [ 0.000000] lowmem : 0xc0000000 - 0xd7000000 ( 368 MB)
  26. [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
  27. [ 0.000000] .text : 0xc0008000 - 0xc06a2420 (6762 kB)
  28. [ 0.000000] .init : 0xc06a3000 - 0xc06ca000 ( 156 kB)
  29. [ 0.000000] .data : 0xc06ca000 - 0xc07045f8 ( 234 kB)
  30. [ 0.000000] .bss : 0xc07045f8 - 0xc07615b8 ( 372 kB)
  31. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  32. [ 0.000000] Preemptible hierarchical RCU implementation.
  33. [ 0.000000] NR_IRQS:522
  34. [ 0.000021] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483648000ns
  35. [ 0.000056] Switching to timer-based delay loop, resolution 1000ns
  36. [ 0.000295] Console: colour dummy device 80x30
  37. [ 0.000450] console [tty1] enabled
  38. [ 0.000471] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=1000)
  39. [ 0.000490] pid_max: default: 32768 minimum: 301
  40. [ 0.000605] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  41. [ 0.000621] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  42. [ 0.001414] Initializing cgroup subsys memory
  43. [ 0.001482] CPU: Testing write buffer coherency: ok
  44. [ 0.001822] Setting up static identity map for 0x511de0 - 0x511e18
  45. [ 0.003498] devtmpfs: initialized
  46. [ 0.018108] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
  47. [ 0.020348] xor: measuring software checksum speed
  48. [ 0.029609] arm4regs : 1164.000 MB/sec
  49. [ 0.039655] 8regs : 564.000 MB/sec
  50. [ 0.049724] 32regs : 564.000 MB/sec
  51. [ 0.049738] xor: using function: arm4regs (1164.000 MB/sec)
  52. [ 0.050488] NET: Registered protocol family 16
  53. [ 0.055961] DMA: preallocated 4096 KiB pool for atomic coherent allocations
  54. [ 0.060913] cpuidle: using governor menu
  55. [ 0.061761] bcm2708.uart_clock = 3000000
  56. [ 0.061797] of_platform_populate failed: -22
  57. [ 0.063777] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
  58. [ 0.063794] hw-breakpoint: maximum watchpoint size is 4 bytes.
  59. [ 0.063827] mailbox: Broadcom VideoCore Mailbox driver
  60. [ 0.063903] bcm2708_vcio: mailbox at f200b880
  61. [ 0.064275] bcm_power: Broadcom power driver
  62. [ 0.064296] bcm_power_open() -> 0
  63. [ 0.064305] bcm_power_request(0, 8)
  64. [ 0.564957] bcm_mailbox_read -> 00000080, 0
  65. [ 0.564972] bcm_power_request -> 0
  66. [ 0.565104] Serial: AMBA PL011 UART driver
  67. [ 0.565231] dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83, base_baud = 0) is a PL011 rev3
  68. [ 0.615232] raid6: int32x1 58 MB/s
  69. [ 0.632034] raid6: int32x2 93 MB/s
  70. [ 0.649202] raid6: int32x4 109 MB/s
  71. [ 0.666595] raid6: int32x8 121 MB/s
  72. [ 0.666610] raid6: using algorithm int32x8 (121 MB/s)
  73. [ 0.666619] raid6: using intx1 recovery algorithm
  74. [ 0.667377] SCSI subsystem initialized
  75. [ 0.667564] usbcore: registered new interface driver usbfs
  76. [ 0.667649] usbcore: registered new interface driver hub
  77. [ 0.667776] usbcore: registered new device driver usb
  78. [ 0.669961] Switched to clocksource stc
  79. [ 0.681591] NET: Registered protocol family 2
  80. [ 0.682810] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
  81. [ 0.682898] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
  82. [ 0.683019] TCP: Hash tables configured (established 4096 bind 4096)
  83. [ 0.683099] TCP: reno registered
  84. [ 0.683119] UDP hash table entries: 256 (order: 0, 4096 bytes)
  85. [ 0.683145] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  86. [ 0.683426] NET: Registered protocol family 1
  87. [ 0.683829] RPC: Registered named UNIX socket transport module.
  88. [ 0.683850] RPC: Registered udp transport module.
  89. [ 0.683858] RPC: Registered tcp transport module.
  90. [ 0.683865] RPC: Registered tcp NFSv4.1 backchannel transport module.
  91. [ 0.684278] Unpacking initramfs...
  92. [ 1.267689] Freeing initrd memory: 5372K (c1000000 - c153f000)
  93. [ 1.268804] bcm2708_dma: DMA manager at f2007000
  94. [ 1.268950] bcm2708_gpio: bcm2708_gpio_probe c06d3eb0
  95. [ 1.269399] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
  96. [ 1.270479] futex hash table entries: 256 (order: -1, 3072 bytes)
  97. [ 1.278109] zpool: loaded
  98. [ 1.278139] zbud: loaded
  99. [ 1.278834] VFS: Disk quotas dquot_6.5.2
  100. [ 1.279152] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  101. [ 1.281794] NFS: Registering the id_resolver key type
  102. [ 1.281893] Key type id_resolver registered
  103. [ 1.281906] Key type id_legacy registered
  104. [ 1.281949] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  105. [ 1.282887] msgmni has been set to 714
  106. [ 1.285124] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
  107. [ 1.285172] io scheduler noop registered
  108. [ 1.285190] io scheduler deadline registered
  109. [ 1.285407] io scheduler cfq registered
  110. [ 1.285766] io scheduler bfq registered (default)
  111. [ 1.285778] BFQ I/O-scheduler version: v7r7
  112. [ 1.287295] BCM2708FB: allocated DMA memory 56400000
  113. [ 1.287354] BCM2708FB: allocated DMA channel 0 @ f2007000
  114. [ 1.299311] Console: switching to colour frame buffer device 160x48
  115. [ 1.309073] bcm2708-dmaengine bcm2708-dmaengine: Load BCM2835 DMA engine driver
  116. [ 1.309407] uart-pl011 dev:f1: no DMA platform data
  117. [ 1.309897] vchiq: vchiq_init_state: slot_zero = 0xd6000000, is_master = 0
  118. [ 1.312233] usbcore: registered new interface driver smsc95xx
  119. [ 1.312331] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  120. [ 1.512464] Core Release: 2.80a
  121. [ 1.512495] Setting default values for core params
  122. [ 1.512538] Finished setting default values for core params
  123. [ 1.712652] Using Buffer DMA mode
  124. [ 1.712677] Periodic Transfer Interrupt Enhancement - disabled
  125. [ 1.712686] Multiprocessor Interrupt Enhancement - disabled
  126. [ 1.712696] OTG VER PARAM: 0, OTG VER FLAG: 0
  127. [ 1.712710] Dedicated Tx FIFOs mode
  128. [ 1.713100] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xd6414000 dma = 0x56414000 len=9024
  129. [ 1.713132] FIQ FSM acceleration enabled for :
  130. [ 1.713132] Non-periodic Split Transactions
  131. [ 1.713132] Periodic Split Transactions
  132. [ 1.713132] High-Speed Isochronous Endpoints
  133. [ 1.713155] dwc_otg: Microframe scheduler enabled
  134. [ 1.713212] WARN::hcd_init_fiq:412: FIQ on core 0 at 0xc03d2208
  135. [ 1.713228] WARN::hcd_init_fiq:413: FIQ ASM at 0xc03d2490 length 36
  136. [ 1.713256] WARN::hcd_init_fiq:438: MPHI regs_base at 0xd7812000
  137. [ 1.713285] dwc_otg bcm2708_usb: DWC OTG Controller
  138. [ 1.713337] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
  139. [ 1.713390] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
  140. [ 1.713425] Init: Port Power? op_state=1
  141. [ 1.713434] Init: Power Port (0)
  142. [ 1.713682] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  143. [ 1.713702] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  144. [ 1.713716] usb usb1: Product: DWC OTG Controller
  145. [ 1.713728] usb usb1: Manufacturer: Linux 3.18.7+ dwc_otg_hcd
  146. [ 1.713739] usb usb1: SerialNumber: bcm2708_usb
  147. [ 1.714620] hub 1-0:1.0: USB hub found
  148. [ 1.714698] hub 1-0:1.0: 1 port detected
  149. [ 1.715217] dwc_otg: FIQ enabled
  150. [ 1.715235] dwc_otg: NAK holdoff enabled
  151. [ 1.715244] dwc_otg: FIQ split-transaction FSM enabled
  152. [ 1.715309] Module dwc_common_port init
  153. [ 1.715744] usbcore: registered new interface driver usb-storage
  154. [ 1.716179] mousedev: PS/2 mouse device common for all mice
  155. [ 1.717195] bcm2835-cpufreq: min=700000 max=840000
  156. [ 1.717494] sdhci: Secure Digital Host Controller Interface driver
  157. [ 1.717509] sdhci: Copyright(c) Pierre Ossman
  158. [ 1.717683] DMA channels allocated for the MMC driver
  159. [ 1.739010] Load BCM2835 MMC driver
  160. [ 1.739429] ledtrig-cpu: registered to indicate activity on CPUs
  161. [ 1.741753] hidraw: raw HID events driver (C) Jiri Kosina
  162. [ 1.744297] usbcore: registered new interface driver usbhid
  163. [ 1.744313] usbhid: USB HID core driver
  164. [ 1.744677] NET: Registered protocol family 17
  165. [ 1.744892] Key type dns_resolver registered
  166. [ 1.746803] zswap: loading zswap
  167. [ 1.746822] zpool: creating pool type zbud
  168. [ 1.746838] zpool: created zbud pool
  169. [ 1.746846] zswap: using zbud pool
  170. [ 1.746917] zswap: using lz4 compressor
  171. [ 1.749827] Btrfs loaded
  172. [ 1.757824] Freeing unused kernel memory: 156K (c06a3000 - c06ca000)
  173. [ 1.757845] BFS CPU scheduler v0.460 by Con Kolivas.
  174. [ 1.788336] mmc0: host does not support reading read-only switch, assuming write-enable
  175. [ 1.790828] mmc0: new high speed SDHC card at address 0002
  176. [ 1.791434] mmcblk0: mmc0:0002 00000 7.32 GiB
  177. [ 1.794071] mmcblk0: p1 p2 p3
  178. [ 1.914185] Indeed it is in host mode hprt0 = 00021501
  179. [ 2.075890] udevd[61]: starting version 175
  180. [ 2.133137] usb 1-1: new high-speed USB device number 2 using dwc_otg
  181. [ 2.133311] Indeed it is in host mode hprt0 = 00001101
  182. [ 2.437546] usb 1-1: New USB device found, idVendor=0424, idProduct=9512
  183. [ 2.437575] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  184. [ 2.438620] hub 1-1:1.0: USB hub found
  185. [ 2.479091] hub 1-1:1.0: 3 ports detected
  186. [ 2.753212] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
  187. [ 2.837497] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
  188. [ 2.837530] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  189. [ 2.841046] smsc95xx v1.0.4
  190. [ 2.969504] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:f7:56:1f
  191. [ 3.043239] usb 1-1.3: new high-speed USB device number 4 using dwc_otg
  192. [ 3.128164] usb 1-1.3: New USB device found, idVendor=152d, idProduct=2329
  193. [ 3.128197] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=5
  194. [ 3.128215] usb 1-1.3: Product: USB to ATA/ATAPI Bridge
  195. [ 3.128229] usb 1-1.3: Manufacturer: JMicron
  196. [ 3.128242] usb 1-1.3: SerialNumber: 110213B40077
  197. [ 3.129792] usb-storage 1-1.3:1.0: USB Mass Storage device detected
  198. [ 3.158202] usb-storage 1-1.3:1.0: Quirks match for vid 152d pid 2329: 8020
  199. [ 3.158414] scsi host0: usb-storage 1-1.3:1.0
  200. [ 3.497270] random: nonblocking pool is initialized
  201. [ 4.160921] scsi 0:0:0:0: Direct-Access Hitachi HTS545050B9A302 PQ: 0 ANSI: 2 CCS
  202. [ 4.163667] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
  203. [ 4.164329] sd 0:0:0:0: [sda] Write Protect is off
  204. [ 4.164363] sd 0:0:0:0: [sda] Mode Sense: 34 00 00 00
  205. [ 4.164949] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
  206. [ 4.244550] GPT:Primary header thinks Alt. header is not at the end of the disk.
  207. [ 4.244590] GPT:976773166 != 976773167
  208. [ 4.244601] GPT:Alternate GPT header not at the end of the disk.
  209. [ 4.244614] GPT:976773166 != 976773167
  210. [ 4.244622] GPT: Use GNU Parted to correct GPT errors.
  211. [ 4.244753] sda: sda1 sda2
  212. [ 4.249771] sd 0:0:0:0: [sda] Attached SCSI disk
  213. [ 4.266912] sd 0:0:0:0: Attached scsi generic sg0 type 0
  214. [ 6.010252] BTRFS: device label xbian devid 1 transid 6980 /dev/mmcblk0p2
  215. [ 6.426244] BTRFS info (device mmcblk0p2): enabling auto defrag
  216. [ 6.426307] BTRFS info (device mmcblk0p2): disk space caching is enabled
  217. [ 6.426320] BTRFS: has skinny extents
  218. [ 6.493513] BTRFS: detected SSD devices, enabling SSD mode
  219. [ 14.306509] BTRFS info (device mmcblk0p2): disk space caching is enabled
  220. [ 17.793470] init: xbian-failaccess main process (490) killed by TERM signal
  221. [ 18.844104] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
  222. [ 20.512030] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
  223. [ 21.832654] udevd[958]: starting version 175
  224. [ 23.135043] bcm2708_i2c_init_pinmode(1,2)
  225. [ 23.135068] bcm2708_i2c_init_pinmode(1,3)
  226. [ 23.135703] bcm2708_i2c bcm2708_i2c.1: BSC1 Controller at 0x20804000 (irq 79) (baudrate 100000)
  227. [ 23.253763] bcm2708_spi bcm2708_spi.0: master is unqueued, this is deprecated
  228. [ 23.254862] bcm2708_spi bcm2708_spi.0: SPI Controller at 0x20204000 (irq 80)
  229. [ 25.607631] pcm512x 1-004d: Failed to reset device: -5
  230. [ 25.607685] pcm512x: probe of 1-004d failed with error -5
  231. [ 25.607909] pcm512x 1-004c: Failed to reset device: -5
  232. [ 25.607944] pcm512x: probe of 1-004c failed with error -5
  233. [ 28.130873] init: failsafe main process (380) killed by TERM signal
  234. [ 36.977115] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  235. [ 46.609474] FAT-fs (sda2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  236. [ 49.374514] init: wait-for-state (xbmcxbmc-loaded) main process (1547) killed by TERM signal
  237. [ 57.209290] init: xbmc-failed-start main process (798) killed by TERM signal
  238. [ 57.412258] init: wait-for-state (zram-swapxbmc-done) main process (1402) killed by TERM signal
  239. [ 59.574580] Adding 250876k swap on /dev/mmcblk0p3. Priority:0 extents:1 across:250876k SSFS
  240. [ 89.679033] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  241. [ 1025.298622] ------------[ cut here ]------------
  242. [ 1025.298692] WARNING: CPU: 0 PID: 0 at net/core/skbuff.c:3995 skb_try_coalesce+0x308/0x388()
  243. [ 1025.298706] Modules linked in: nfsd snd_soc_tas5713 snd_soc_pcm512x_i2c snd_soc_wm8804 snd_soc_pcm512x regmap_i2c leds_gpio led_class snd_soc_bcm2708_i2s regmap_mmio snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer spi_bcm2708 i2c_bcm2708 i2c_core snd soundcore frandom sg
  244. [ 1025.298788] CPU: 0 PID: 0 Comm: BFS Not tainted 3.18.7+ #1
  245. [ 1025.298840] [<c0013340>] (unwind_backtrace) from [<c0010ed0>] (show_stack+0x10/0x14)
  246. [ 1025.298872] [<c0010ed0>] (show_stack) from [<c001f4bc>] (warn_slowpath_common+0x68/0x88)
  247. [ 1025.298896] [<c001f4bc>] (warn_slowpath_common) from [<c001f4f8>] (warn_slowpath_null+0x1c/0x24)
  248. [ 1025.298921] [<c001f4f8>] (warn_slowpath_null) from [<c043a0c8>] (skb_try_coalesce+0x308/0x388)
  249. [ 1025.298948] [<c043a0c8>] (skb_try_coalesce) from [<c048dab4>] (tcp_try_coalesce+0x4c/0xc8)
  250. [ 1025.298971] [<c048dab4>] (tcp_try_coalesce) from [<c048e2dc>] (tcp_data_queue+0x398/0xc38)
  251. [ 1025.298992] [<c048e2dc>] (tcp_data_queue) from [<c0490a00>] (tcp_rcv_established+0x128/0x5cc)
  252. [ 1025.299019] [<c0490a00>] (tcp_rcv_established) from [<c0499b34>] (tcp_v4_do_rcv+0x104/0x27c)
  253. [ 1025.299041] [<c0499b34>] (tcp_v4_do_rcv) from [<c049bc3c>] (tcp_v4_rcv+0x91c/0x9f8)
  254. [ 1025.299071] [<c049bc3c>] (tcp_v4_rcv) from [<c0478440>] (ip_local_deliver_finish+0xcc/0x240)
  255. [ 1025.299093] [<c0478440>] (ip_local_deliver_finish) from [<c0478154>] (ip_rcv_finish+0x124/0x344)
  256. [ 1025.299122] [<c0478154>] (ip_rcv_finish) from [<c044366c>] (__netif_receive_skb_core+0x608/0x7c8)
  257. [ 1025.299151] [<c044366c>] (__netif_receive_skb_core) from [<c0445f54>] (process_backlog+0x60/0xf8)
  258. [ 1025.299176] [<c0445f54>] (process_backlog) from [<c04466b0>] (net_rx_action+0x12c/0x210)
  259. [ 1025.299204] [<c04466b0>] (net_rx_action) from [<c0021d10>] (__do_softirq+0xcc/0x1e4)
  260. [ 1025.299227] [<c0021d10>] (__do_softirq) from [<c00220a0>] (irq_exit+0x9c/0xf0)
  261. [ 1025.299252] [<c00220a0>] (irq_exit) from [<c0044a24>] (__handle_domain_irq+0x74/0xc0)
  262. [ 1025.299278] [<c0044a24>] (__handle_domain_irq) from [<c00119d4>] (__irq_svc+0x34/0xc8)
  263. [ 1025.299301] [<c00119d4>] (__irq_svc) from [<c000ecb8>] (arch_cpu_idle+0x28/0x30)
  264. [ 1025.299335] [<c000ecb8>] (arch_cpu_idle) from [<c003ee84>] (cpu_startup_entry+0x1a0/0x1f4)
  265. [ 1025.299363] [<c003ee84>] (cpu_startup_entry) from [<c06a3c1c>] (start_kernel+0x370/0x3e0)
  266. [ 1025.299376] ---[ end trace b6a8196c94681d03 ]---
  267. [67276.351467] NYET/NAK/ACK/other in non-error case, 0x00000002
  268. [67276.351522] NYET/NAK/ACK/other in non-error case, 0x00000002
  269. [67276.351558] NYET/NAK/ACK/other in non-error case, 0x00000002
  270. [67276.351620] hub 1-1:1.0: hub_port_status failed (err = -71)
  271. [67276.351676] NYET/NAK/ACK/other in non-error case, 0x00000002
  272. [67276.351715] NYET/NAK/ACK/other in non-error case, 0x00000002
  273. [67276.351750] NYET/NAK/ACK/other in non-error case, 0x00000002
  274. [67276.351798] usb 1-1-port3: cannot reset (err = -71)
  275. [67276.351850] NYET/NAK/ACK/other in non-error case, 0x00000002
  276. [67276.351888] NYET/NAK/ACK/other in non-error case, 0x00000002
  277. [67276.351924] NYET/NAK/ACK/other in non-error case, 0x00000002
  278. [67276.351968] usb 1-1-port3: cannot reset (err = -71)
  279. [67276.352018] NYET/NAK/ACK/other in non-error case, 0x00000002
  280. [67276.352054] NYET/NAK/ACK/other in non-error case, 0x00000002
  281. [67276.352087] NYET/NAK/ACK/other in non-error case, 0x00000002
  282. [67276.352132] usb 1-1-port3: cannot reset (err = -71)
  283. [67276.352181] NYET/NAK/ACK/other in non-error case, 0x00000002
  284. [67276.352217] NYET/NAK/ACK/other in non-error case, 0x00000002
  285. [67276.352251] NYET/NAK/ACK/other in non-error case, 0x00000002
  286. [67276.352298] usb 1-1-port3: cannot reset (err = -71)
  287. [67276.352311] usb 1-1-port3: Cannot enable. Maybe the USB cable is bad?
  288. [67276.352360] NYET/NAK/ACK/other in non-error case, 0x00000002
  289. [67276.352428] NYET/NAK/ACK/other in non-error case, 0x00000002
  290. [67276.352467] NYET/NAK/ACK/other in non-error case, 0x00000002
  291. [67276.352515] usb 1-1-port3: cannot disable (err = -71)
  292. [67276.352573] NYET/NAK/ACK/other in non-error case, 0x00000002
  293. [67276.352610] NYET/NAK/ACK/other in non-error case, 0x00000002
  294. [67276.352644] NYET/NAK/ACK/other in non-error case, 0x00000002
  295. [67276.352689] usb 1-1-port3: cannot reset (err = -71)
  296. [67276.352739] NYET/NAK/ACK/other in non-error case, 0x00000002
  297. [67276.352776] NYET/NAK/ACK/other in non-error case, 0x00000002
  298. [67276.352809] NYET/NAK/ACK/other in non-error case, 0x00000002
  299. [67276.352864] usb 1-1-port3: cannot reset (err = -71)
  300. [67276.352915] NYET/NAK/ACK/other in non-error case, 0x00000002
  301. [67276.352952] NYET/NAK/ACK/other in non-error case, 0x00000002
  302. [67276.352987] NYET/NAK/ACK/other in non-error case, 0x00000002
  303. [67276.353031] usb 1-1-port3: cannot reset (err = -71)
  304. [67276.353081] NYET/NAK/ACK/other in non-error case, 0x00000002
  305. [67276.353118] NYET/NAK/ACK/other in non-error case, 0x00000002
  306. [67276.353152] NYET/NAK/ACK/other in non-error case, 0x00000002
  307. [67276.353195] usb 1-1-port3: cannot reset (err = -71)
  308. [67276.353245] NYET/NAK/ACK/other in non-error case, 0x00000002
  309. [67276.353280] NYET/NAK/ACK/other in non-error case, 0x00000002
  310. [67276.353315] NYET/NAK/ACK/other in non-error case, 0x00000002
  311. [67276.353360] usb 1-1-port3: cannot reset (err = -71)
  312. [67276.353409] usb 1-1-port3: Cannot enable. Maybe the USB cable is bad?
  313. [67276.353461] NYET/NAK/ACK/other in non-error case, 0x00000002
  314. [67276.353498] NYET/NAK/ACK/other in non-error case, 0x00000002
  315. [67276.353531] NYET/NAK/ACK/other in non-error case, 0x00000002
  316. [67276.353576] usb 1-1-port3: cannot disable (err = -71)
  317. [67276.353635] NYET/NAK/ACK/other in non-error case, 0x00000002
  318. [67276.353673] NYET/NAK/ACK/other in non-error case, 0x00000002
  319. [67276.353707] NYET/NAK/ACK/other in non-error case, 0x00000002
  320. [67276.353754] usb 1-1-port3: cannot reset (err = -71)
  321. [67276.353803] NYET/NAK/ACK/other in non-error case, 0x00000002
  322. [67276.353841] NYET/NAK/ACK/other in non-error case, 0x00000002
  323. [67276.353874] NYET/NAK/ACK/other in non-error case, 0x00000002
  324. [67276.353920] usb 1-1-port3: cannot reset (err = -71)
  325. [67276.353970] NYET/NAK/ACK/other in non-error case, 0x00000002
  326. [67276.354007] NYET/NAK/ACK/other in non-error case, 0x00000002
  327. [67276.354042] NYET/NAK/ACK/other in non-error case, 0x00000002
  328. [67276.354086] usb 1-1-port3: cannot reset (err = -71)
  329. [67276.354136] NYET/NAK/ACK/other in non-error case, 0x00000002
  330. [67276.354172] NYET/NAK/ACK/other in non-error case, 0x00000002
  331. [67276.354207] NYET/NAK/ACK/other in non-error case, 0x00000002
  332. [67276.354252] usb 1-1-port3: cannot reset (err = -71)
  333. [67276.354302] NYET/NAK/ACK/other in non-error case, 0x00000002
  334. [67276.354339] NYET/NAK/ACK/other in non-error case, 0x00000002
  335. [67276.354414] NYET/NAK/ACK/other in non-error case, 0x00000002
  336. [67276.354484] usb 1-1-port3: cannot reset (err = -71)
  337. [67276.354497] usb 1-1-port3: Cannot enable. Maybe the USB cable is bad?
  338. [67276.354549] NYET/NAK/ACK/other in non-error case, 0x00000002
  339. [67276.354588] NYET/NAK/ACK/other in non-error case, 0x00000002
  340. [67276.354624] NYET/NAK/ACK/other in non-error case, 0x00000002
  341. [67276.354669] usb 1-1-port3: cannot disable (err = -71)
  342. [67276.354724] NYET/NAK/ACK/other in non-error case, 0x00000002
  343. [67276.354761] NYET/NAK/ACK/other in non-error case, 0x00000002
  344. [67276.354795] NYET/NAK/ACK/other in non-error case, 0x00000002
  345. [67276.354839] usb 1-1-port3: cannot reset (err = -71)
  346. [67276.354889] NYET/NAK/ACK/other in non-error case, 0x00000002
  347. [67276.354924] NYET/NAK/ACK/other in non-error case, 0x00000002
  348. [67276.354959] NYET/NAK/ACK/other in non-error case, 0x00000002
  349. [67276.355005] usb 1-1-port3: cannot reset (err = -71)
  350. [67276.355053] NYET/NAK/ACK/other in non-error case, 0x00000002
  351. [67276.355090] NYET/NAK/ACK/other in non-error case, 0x00000002
  352. [67276.355122] NYET/NAK/ACK/other in non-error case, 0x00000002
  353. [67276.355168] usb 1-1-port3: cannot reset (err = -71)
  354. [67276.355217] NYET/NAK/ACK/other in non-error case, 0x00000002
  355. [67276.355254] NYET/NAK/ACK/other in non-error case, 0x00000002
  356. [67276.355288] NYET/NAK/ACK/other in non-error case, 0x00000002
  357. [67276.355333] usb 1-1-port3: cannot reset (err = -71)
  358. [67276.355412] NYET/NAK/ACK/other in non-error case, 0x00000002
  359. [67276.355452] NYET/NAK/ACK/other in non-error case, 0x00000002
  360. [67276.355486] NYET/NAK/ACK/other in non-error case, 0x00000002
  361. [67276.355535] usb 1-1-port3: cannot reset (err = -71)
  362. [67276.355550] usb 1-1-port3: Cannot enable. Maybe the USB cable is bad?
  363. [67276.355599] NYET/NAK/ACK/other in non-error case, 0x00000002
  364. [67276.355637] NYET/NAK/ACK/other in non-error case, 0x00000002
  365. [67276.355670] NYET/NAK/ACK/other in non-error case, 0x00000002
  366. [67276.355716] usb 1-1-port3: cannot disable (err = -71)
  367. [67276.355770] NYET/NAK/ACK/other in non-error case, 0x00000002
  368. [67276.355807] NYET/NAK/ACK/other in non-error case, 0x00000002
  369. [67276.355840] NYET/NAK/ACK/other in non-error case, 0x00000002
  370. [67276.355888] usb 1-1-port3: cannot disable (err = -71)
  371. [67276.355988] NYET/NAK/ACK/other in non-error case, 0x00000002
  372. [67276.356026] NYET/NAK/ACK/other in non-error case, 0x00000002
  373. [67276.356060] NYET/NAK/ACK/other in non-error case, 0x00000002
  374. [67276.356113] hub 1-1:1.0: hub_port_status failed (err = -71)
  375. [67276.385505] sd 0:0:0:0: [sda]
  376. [67276.385534] Result: hostbyte=0x07 driverbyte=0x00
  377. [67276.385547] sd 0:0:0:0: [sda] CDB:
  378. [67276.385555] cdb[0]=0x28: 28 00 27 f6 c9 00 00 00 f0 00
  379. [67276.385594] blk_update_request: I/O error, dev sda, sector 670484736
  380. [67276.415482] sd 0:0:0:0: [sda]
  381. [67276.415514] Result: hostbyte=0x07 driverbyte=0x00
  382. [67276.415527] sd 0:0:0:0: [sda] CDB:
  383. [67276.415537] cdb[0]=0x28: 28 00 27 f6 c9 f0 00 00 f0 00
  384. [67276.415578] blk_update_request: I/O error, dev sda, sector 670484976
  385. [67276.445564] sd 0:0:0:0: [sda]
  386. [67276.445594] Result: hostbyte=0x07 driverbyte=0x00
  387. [67276.445607] sd 0:0:0:0: [sda] CDB:
  388. [67276.445616] cdb[0]=0x28: 28 00 27 f6 ca e0 00 00 28 00
  389. [67276.445656] blk_update_request: I/O error, dev sda, sector 670485216
  390. [67276.475483] sd 0:0:0:0: [sda]
  391. [67276.475514] Result: hostbyte=0x07 driverbyte=0x00
  392. [67276.475527] sd 0:0:0:0: [sda] CDB:
  393. [67276.475536] cdb[0]=0x28: 28 00 27 f5 8f 00 00 00 f0 00
  394. [67276.475575] blk_update_request: I/O error, dev sda, sector 670404352
  395. [67276.505485] sd 0:0:0:0: [sda]
  396. [67276.505515] Result: hostbyte=0x07 driverbyte=0x00
  397. [67276.505529] sd 0:0:0:0: [sda] CDB:
  398. [67276.505537] cdb[0]=0x28: 28 00 27 f5 8f f0 00 00 f0 00
  399. [67276.505577] blk_update_request: I/O error, dev sda, sector 670404592
  400. [67276.535481] sd 0:0:0:0: [sda]
  401. [67276.535510] Result: hostbyte=0x07 driverbyte=0x00
  402. [67276.535523] sd 0:0:0:0: [sda] CDB:
  403. [67276.535532] cdb[0]=0x28: 28 00 27 f5 90 e0 00 00 28 00
  404. [67276.535570] blk_update_request: I/O error, dev sda, sector 670404832
  405. [67276.545551] usb usb1-port1: disabled by hub (EMI?), re-enabling...
  406. [67276.545589] usb 1-1: USB disconnect, device number 2
  407. [67276.545605] usb 1-1.1: USB disconnect, device number 3
  408. [67276.545996] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet
  409. [67276.546146] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
  410. [67276.563249] usb 1-1.3: USB disconnect, device number 4
  411. [67277.625609] Indeed it is in host mode hprt0 = 00001501
  412. [67278.136590] usb 1-1: new high-speed USB device number 5 using dwc_otg
  413. [67278.136774] Indeed it is in host mode hprt0 = 00001101
  414. [67278.560009] usb 1-1: New USB device found, idVendor=0424, idProduct=9512
  415. [67278.560038] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  416. [67278.561019] hub 1-1:1.0: USB hub found
  417. [67278.561148] hub 1-1:1.0: 3 ports detected
  418. [67278.834657] usb 1-1.1: new high-speed USB device number 6 using dwc_otg
  419. [67278.918887] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
  420. [67278.918916] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  421. [67278.922048] smsc95xx v1.0.4
  422. [67278.996805] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:f7:56:1f
  423. [67279.071662] usb 1-1.3: new high-speed USB device number 7 using dwc_otg
  424. [67279.156558] usb 1-1.3: New USB device found, idVendor=152d, idProduct=2329
  425. [67279.156587] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=5
  426. [67279.156601] usb 1-1.3: Product: USB to ATA/ATAPI Bridge
  427. [67279.156613] usb 1-1.3: Manufacturer: JMicron
  428. [67279.156624] usb 1-1.3: SerialNumber: 110213B40077
  429. [67279.158891] usb-storage 1-1.3:1.0: USB Mass Storage device detected
  430. [67279.159207] usb-storage 1-1.3:1.0: Quirks match for vid 152d pid 2329: 8020
  431. [67279.159318] scsi host1: usb-storage 1-1.3:1.0
  432. [67280.252683] usb 1-1.3: reset high-speed USB device number 7 using dwc_otg
  433. [67295.325934] usb 1-1.3: device descriptor read/64, error -110
  434. [67295.602970] usb 1-1.3: reset high-speed USB device number 7 using dwc_otg
  435. [67310.676242] usb 1-1.3: device descriptor read/64, error -110
  436. [67310.867542] scsi 1:0:0:0: Direct-Access Hitachi HTS545050B9A302 PQ: 0 ANSI: 2 CCS
  437. [67310.880392] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
  438. [67310.880934] sd 1:0:0:0: [sdb] Write Protect is off
  439. [67310.880963] sd 1:0:0:0: [sdb] Mode Sense: 34 00 00 00
  440. [67310.881524] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
  441. [67310.886631] sd 1:0:0:0: Attached scsi generic sg0 type 0
  442. [67310.996253] usb 1-1.3: reset high-speed USB device number 7 using dwc_otg
  443. [67311.116650] usb 1-1.3: USB disconnect, device number 7
  444. [67311.123203] sd 1:0:0:0: [sdb]
  445. [67311.123237] Result: hostbyte=0x01 driverbyte=0x00
  446. [67311.123252] sd 1:0:0:0: [sdb] CDB:
  447. [67311.123261] cdb[0]=0x28: 28 00 00 00 00 00 00 00 08 00
  448. [67311.123299] blk_update_request: I/O error, dev sdb, sector 0
  449. [67311.123315] Buffer I/O error on dev sdb, logical block 0, async page read
  450. [67311.123491] ldm_validate_partition_table(): Disk read failed.
  451. [67311.123613] sdb: unable to read partition table
  452. [67311.124597] sd 1:0:0:0: [sdb] READ CAPACITY failed
  453. [67311.124627] sd 1:0:0:0: [sdb]
  454. [67311.124638] Result: hostbyte=0x01 driverbyte=0x00
  455. [67311.124650] sd 1:0:0:0: [sdb] Sense not available.
  456. [67311.124817] sd 1:0:0:0: [sdb] Attached SCSI disk
  457. [67311.330278] usb 1-1.3: new high-speed USB device number 8 using dwc_otg
  458. [67311.443126] usb 1-1.3: New USB device found, idVendor=152d, idProduct=2329
  459. [67311.443158] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=5
  460. [67311.443171] usb 1-1.3: Product: USB to ATA/ATAPI Bridge
  461. [67311.443182] usb 1-1.3: Manufacturer: JMicron
  462. [67311.443193] usb 1-1.3: SerialNumber: 110213B40077
  463. [67311.445478] usb-storage 1-1.3:1.0: USB Mass Storage device detected
  464. [67311.445808] usb-storage 1-1.3:1.0: Quirks match for vid 152d pid 2329: 8020
  465. [67311.453420] scsi host2: usb-storage 1-1.3:1.0
  466. [67312.498819] scsi 2:0:0:0: Direct-Access Hitachi HTS545050B9A302 PQ: 0 ANSI: 2 CCS
  467. [67312.499891] sd 2:0:0:0: Attached scsi generic sg0 type 0
  468. [67312.569180] sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
  469. [67312.570199] sd 2:0:0:0: [sdb] Write Protect is off
  470. [67312.570232] sd 2:0:0:0: [sdb] Mode Sense: 34 00 00 00
  471. [67312.571194] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
  472. [67312.633943] GPT:Primary header thinks Alt. header is not at the end of the disk.
  473. [67312.633978] GPT:976773166 != 976773167
  474. [67312.633987] GPT:Alternate GPT header not at the end of the disk.
  475. [67312.633996] GPT:976773166 != 976773167
  476. [67312.634002] GPT: Use GNU Parted to correct GPT errors.
  477. [67312.634191] sdb: sdb1 sdb2
  478. [67312.644294] sd 2:0:0:0: [sdb] Attached SCSI disk
  479. [67344.777035] FAT-fs (sdb2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  480. [67364.687169] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  481. [67370.925361] Buffer I/O error on dev sda2, logical block 669708551, lost async page write
  482. [67371.203792] Buffer I/O error on dev sda2, logical block 669635847, lost async page write
  483. [67371.204711] FAT-fs (sda2): unable to read inode block for updating (i_pos 10712942730)
  484. [84078.662794] usb 1-1.2: new low-speed USB device number 9 using dwc_otg
  485. [84078.857635] usb 1-1.2: New USB device found, idVendor=04d9, idProduct=1603
  486. [84078.857667] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  487. [84078.857681] usb 1-1.2: Product: USB Keyboard
  488. [84078.857693] usb 1-1.2: Manufacturer:
  489. [84078.913196] input: USB Keyboard as /devices/platform/bcm2708_usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:04D9:1603.0001/input/input0
  490. [84078.913982] hid-generic 0003:04D9:1603.0001: input,hidraw0: USB HID v1.10 Keyboard [ USB Keyboard] on usb-bcm2708_usb-1.2/input0
  491. [84079.005693] input: USB Keyboard as /devices/platform/bcm2708_usb/usb1/1-1/1-1.2/1-1.2:1.1/0003:04D9:1603.0002/input/input1
  492. [84079.007177] hid-generic 0003:04D9:1603.0002: input,hidraw1: USB HID v1.10 Device [ USB Keyboard] on usb-bcm2708_usb-1.2/input1
  493. [84148.025822] init: wait-for-state (kill-splashxbmc-exits) main process (7383) killed by TERM signal
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement