[   87.040070] usb 4-4: new low speed USB device using ohci_hcd and address 2
[   87.045830] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[   87.045840] cdrom: Uniform CD-ROM driver Revision: 3.20
[   87.046118] sr 6:0:0:0: Attached scsi CD-ROM sr0
[   87.046247] sr 6:0:0:0: Attached scsi generic sg1 type 5
[   87.360366] input: VISENTA V1  as /devices/pci0000:00/0000:00:06.0/usb4/4-4/4-4:1.0/input/input3
[   87.360625] generic-usb 0003:04D9:2519.0001: input,hidraw0: USB HID v1.10 Keyboard [VISENTA V1 ] on usb-0000:00:06.0-4/input0
[   87.375922] input: VISENTA V1  as /devices/pci0000:00/0000:00:06.0/usb4/4-4/4-4:1.1/input/input4
[   87.376317] generic-usb 0003:04D9:2519.0002: input,hidraw1: USB HID v1.10 Mouse [VISENTA V1 ] on usb-0000:00:06.0-4/input1
[   87.377391] usbcore: registered new interface driver usbhid
[   87.377396] usbhid: USB HID core driver
[   87.482306] 8:3:1: cannot set freq 16000 to ep 0x86
[   87.630059] usb 4-5: new low speed USB device using ohci_hcd and address 3
[   87.940393] input: TopSeed Tech Corp. USB IR Combo Device  as /devices/pci0000:00/0000:00:06.0/usb4/4-5/4-5:1.0/input/input5
[   87.940603] topseed 0003:0766:0204.0003: input,hidraw2: USB HID v1.00 Keyboard [TopSeed Tech Corp. USB IR Combo Device ] on usb-0000:00:06.0-5/input0
[   87.952555] input: TopSeed Tech Corp. USB IR Combo Device  as /devices/pci0000:00/0000:00:06.0/usb4/4-5/4-5:1.1/input/input6
[   87.954848] topseed 0003:0766:0204.0004: input,hiddev0,hidraw3: USB HID v1.00 Mouse [TopSeed Tech Corp. USB IR Combo Device ] on usb-0000:00:06.0-5/input1
[   88.050115] usb 3-2: new low speed USB device using ohci_hcd and address 2
[   88.210501] input: eventlircd as /devices/virtual/input/input7
[   88.320452] input: NOVATEK USB MULTIMEDIA KEYBOARD as /devices/pci0000:00/0000:00:04.0/usb3/3-2/3-2:1.0/input/input8
[   88.320643] generic-usb 0003:04A5:7008.0005: input,hidraw4: USB HID v1.10 Keyboard [NOVATEK USB MULTIMEDIA KEYBOARD] on usb-0000:00:04.0-2/input0
[   88.332275] input: NOVATEK USB MULTIMEDIA KEYBOARD as /devices/pci0000:00/0000:00:04.0/usb3/3-2/3-2:1.1/input/input9
[   88.332444] generic-usb 0003:04A5:7008.0006: input,hidraw5: USB HID v1.10 Device [NOVATEK USB MULTIMEDIA KEYBOARD] on usb-0000:00:04.0-2/input1
[   88.480179] 8:3:2: cannot set freq 24000 to ep 0x86
[   88.680052] usb 3-3: new full speed USB device using ohci_hcd and address 3
[   89.480183] 8:3:3: cannot set freq 32000 to ep 0x86
[   90.480182] 8:3:4: cannot set freq 48000 to ep 0x86
[   90.498475] usbcore: registered new interface driver snd-usb-audio
[   90.498535] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0825)
[   90.515378] input: UVC Camera (046d:0825) as /devices/pci0000:00/0000:00:04.1/usb1/1-6/1-6:1.0/input/input10
[   90.515491] usbcore: registered new interface driver uvcvideo
[   90.515494] USB Video Class driver (1.1.1)
[  103.850046] usb 3-3: device descriptor read/64, error -110
[  119.150054] usb 3-3: device descriptor read/64, error -110
[  119.440035] usb 3-3: new full speed USB device using ohci_hcd and address 4
[  134.620016] usb 3-3: device descriptor read/64, error -110
[  149.910016] usb 3-3: device descriptor read/64, error -110
[  150.200014] usb 3-3: new full speed USB device using ohci_hcd and address 5
[  155.230171] usb 3-3: device descriptor read/8, error -110
[  160.360171] usb 3-3: device descriptor read/8, error -110
[  160.650013] usb 3-3: new full speed USB device using ohci_hcd and address 6
[  165.680176] usb 3-3: device descriptor read/8, error -110
[  170.810181] usb 3-3: device descriptor read/8, error -110
[  170.920023] hub 3-0:1.0: unable to enumerate USB device on port 3
[  190.910015] usb 1-3: new high speed USB device using ehci_hcd and address 9
[  191.074766] WARNING: You are using an experimental version of the media stack.
[  191.074769]  As the driver is backported to an older kernel, it doesn't offer
[  191.074771]  enough quality for its usage in production.
[  191.074772]  Use it with care.
[  191.074773] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[  191.074775]  875e2e3edf48a206c64195666cf408dd3d119137 [media] omap3isp: Mark next captured frame as faulty when an SBL overflow occurs
[  191.074777]  c3cd257402fdcd650816ec25b83480a24912430a [media] omap3isp: video: Don't WARN() on unknown pixel formats
[  191.074779]  22db44cb9cd67d56b02b2b5dceb10d3d1361b28b [media] as3645a: Add driver for LED flash controller
[  191.084387] IR NEC protocol handler initialized
[  191.084958] WARNING: You are using an experimental version of the media stack.
[  191.084961]  As the driver is backported to an older kernel, it doesn't offer
[  191.084963]  enough quality for its usage in production.
[  191.084964]  Use it with care.
[  191.084965] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[  191.084967]  875e2e3edf48a206c64195666cf408dd3d119137 [media] omap3isp: Mark next captured frame as faulty when an SBL overflow occurs
[  191.084969]  c3cd257402fdcd650816ec25b83480a24912430a [media] omap3isp: video: Don't WARN() on unknown pixel formats
[  191.084971]  22db44cb9cd67d56b02b2b5dceb10d3d1361b28b [media] as3645a: Add driver for LED flash controller
[  191.092775] IR RC5(x) protocol handler initialized
[  191.094951] dvb-usb: found a 'TeVii S660 USB' in cold state, will try to load a firmware
[  191.095964] IR RC6 protocol handler initialized
[  191.098859] IR JVC protocol handler initialized
[  191.101664] IR Sony protocol handler initialized
[  191.104554] IR MCE Keyboard/mouse protocol handler initialized
[  191.108824] lirc_dev: IR Remote Control driver registered, major 249
[  191.110758] IR LIRC bridge handler initialized
[  191.126110] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw'
[  191.126115] dw2102: start downloading DW210X firmware
[  191.143753] usb 1-3: USB disconnect, address 9
[  191.250023] dvb-usb: found a 'TeVii S660 USB' in warm state.
[  191.250107] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[  191.250138] DVB: registering new adapter (TeVii S660 USB)
[  191.250431] dvb-usb: MAC address: 70:70:70:70:70:70
[  191.257976] Invalid probe, probably not a DS3000
[  191.258088] dvb-usb: no frontend was attached by 'TeVii S660 USB'
[  191.258205] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:04.1/usb1/1-3/input/input11
[  191.258304] dvb-usb: schedule remote query interval to 150 msecs.
[  191.258311] dvb-usb: TeVii S660 USB successfully initialized and connected.
[  191.258413] usbcore: registered new interface driver dw2102
[  191.320496] dvb-usb: TeVii S660 USB successfully deinitialized and disconnected.
[  192.940016] usb 1-3: new high speed USB device using ehci_hcd and address 10
[  193.090612] usb 1-3: config 1 interface 0 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 2
[  193.091313] dvb-usb: found a 'TeVii S660 USB' in cold state, will try to load a firmware
[  193.098878] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw'
[  193.098883] dw2102: start downloading DW210X firmware
[  193.220021] dvb-usb: found a 'TeVii S660 USB' in warm state.
[  193.220111] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[  193.220266] DVB: registering new adapter (TeVii S660 USB)
[  193.347857] dvb-usb: MAC address: 00:18:bd:5c:3e:2a
[  193.349865] DS3000 chip version: 0.192 attached.
[  193.350193] dw2102: Attached ds3000+ds2020!
[  193.350196]
[  193.350203] DVB: registering adapter 0 frontend 0 (Montage Technology DS3000/TS2020)...
[  193.350832] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:04.1/usb1/1-3/input/input12
[  193.350924] dvb-usb: schedule remote query interval to 150 msecs.
[  193.350929] dvb-usb: TeVii S660 USB successfully initialized and connected.
[  194.202232] ds3000_firmware_ondemand: Waiting for firmware upload (dvb-fe-ds3000.fw)...
[  194.218018] ds3000_firmware_ondemand: Waiting for firmware upload(2)...
[  453.080301] usb 1-3: USB disconnect, address 10
[  454.853760] dvb-usb: TeVii S660 USB successfully deinitialized and disconnected.
[  457.520015] usb 1-3: new high speed USB device using ehci_hcd and address 11
[  457.671111] dvb-usb: found a 'TeVii S660 USB' in cold state, will try to load a firmware
[  457.675406] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw'
[  457.675411] dw2102: start downloading DW210X firmware
[  457.800022] dvb-usb: found a 'TeVii S660 USB' in warm state.
[  457.800112] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[  457.830565] DVB: registering new adapter (TeVii S660 USB)
[  474.199547] dvb-usb: MAC address: e8:e8:e8:e8:e8:e8
[  474.263545] Invalid probe, probably not a DS3000
[  474.263676] dvb-usb: no frontend was attached by 'TeVii S660 USB'
[  474.327655] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:04.1/usb1/1-3/input/input13
[  474.327755] dvb-usb: schedule remote query interval to 150 msecs.
[  474.327760] dvb-usb: TeVii S660 USB successfully initialized and connected.
[  474.327823] usb 1-3: USB disconnect, address 11
[  474.400477] dvb-usb: TeVii S660 USB successfully deinitialized and disconnected.
[  474.680016] usb 1-3: new high speed USB device using ehci_hcd and address 12
[  474.830797] usb 1-3: config 1 interface 0 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 2
[  474.831502] dvb-usb: found a 'TeVii S660 USB' in cold state, will try to load a firmware
[  474.839050] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw'
[  474.839055] dw2102: start downloading DW210X firmware
[  474.960023] dvb-usb: found a 'TeVii S660 USB' in warm state.
[  474.960111] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[  474.960323] DVB: registering new adapter (TeVii S660 USB)
[  475.087545] dvb-usb: MAC address: 00:18:bd:5c:3e:2a
[  475.089550] DS3000 chip version: 0.192 attached.
[  475.089692] dw2102: Attached ds3000+ds2020!
[  475.089694]
[  475.089701] DVB: registering adapter 0 frontend 0 (Montage Technology DS3000/TS2020)...
[  475.090393] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:04.1/usb1/1-3/input/input14
[  475.090477] dvb-usb: schedule remote query interval to 150 msecs.
[  475.090484] dvb-usb: TeVii S660 USB successfully initialized and connected.
[  475.912420] ds3000_firmware_ondemand: Waiting for firmware upload (dvb-fe-ds3000.fw)...
[  475.916524] ds3000_firmware_ondemand: Waiting for firmware upload(2)...
[  478.613570] usb 1-3: USB disconnect, address 12
[  483.525556] dvb-usb: TeVii S660 USB successfully deinitialized and disconnected.
[  483.810013] usb 1-3: new high speed USB device using ehci_hcd and address 13
[  483.961127] dvb-usb: found a 'TeVii S660 USB' in cold state, will try to load a firmware
[  483.967226] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw'
[  483.967231] dw2102: start downloading DW210X firmware
[  484.090023] dvb-usb: found a 'TeVii S660 USB' in warm state.
[  484.090111] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[  484.120583] DVB: registering new adapter (TeVii S660 USB)
[  500.489565] dvb-usb: MAC address: a8:a8:a8:a8:a8:a8
[  500.553563] Invalid probe, probably not a DS3000
[  500.553693] dvb-usb: no frontend was attached by 'TeVii S660 USB'
[  500.617665] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:04.1/usb1/1-3/input/input15
[  500.617768] dvb-usb: schedule remote query interval to 150 msecs.
[  500.617773] dvb-usb: TeVii S660 USB successfully initialized and connected.
[  500.617831] usb 1-3: USB disconnect, address 13
[  500.700484] dvb-usb: TeVii S660 USB successfully deinitialized and disconnected.
[  500.980016] usb 1-3: new high speed USB device using ehci_hcd and address 14
[  501.130817] usb 1-3: config 1 interface 0 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 2
[  501.131514] dvb-usb: found a 'TeVii S660 USB' in cold state, will try to load a firmware
[  501.135559] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw'
[  501.135564] dw2102: start downloading DW210X firmware
[  501.260039] dvb-usb: found a 'TeVii S660 USB' in warm state.
[  501.260167] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[  501.260340] DVB: registering new adapter (TeVii S660 USB)
[  501.390063] dvb-usb: MAC address: 00:18:bd:5c:3e:2a
[  501.395693] DS3000 chip version: 0.192 attached.
[  501.395815] dw2102: Attached ds3000+ds2020!
[  501.395816]
[  501.395822] DVB: registering adapter 0 frontend 0 (Montage Technology DS3000/TS2020)...
[  501.396280] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:04.1/usb1/1-3/input/input16
[  501.396382] dvb-usb: schedule remote query interval to 150 msecs.
[  501.396388] dvb-usb: TeVii S660 USB successfully initialized and connected.
[  504.582439] ds3000_firmware_ondemand: Waiting for firmware upload (dvb-fe-ds3000.fw)...
[  504.586519] ds3000_firmware_ondemand: Waiting for firmware upload(2)...
[  714.793854] hub 1-0:1.0: port 3 disabled by hub (EMI?), re-enabling...
[  714.793863] usb 1-3: USB disconnect, address 14
[  716.888165] dvb-usb: TeVii S660 USB successfully deinitialized and disconnected.
[  747.790016] usb 1-3: new high speed USB device using ehci_hcd and address 15
[  747.941309] dvb-usb: found a 'TeVii S660 USB' in cold state, will try to load a firmware
[  747.945510] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw'
[  747.945515] dw2102: start downloading DW210X firmware
[  748.070024] dvb-usb: found a 'TeVii S660 USB' in warm state.
[  748.070111] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[  748.101171] DVB: registering new adapter (TeVii S660 USB)
[  764.468741] dvb-usb: MAC address: 60:60:60:60:60:60
[  764.532740] Invalid probe, probably not a DS3000
[  764.532871] dvb-usb: no frontend was attached by 'TeVii S660 USB'
[  764.596839] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:04.1/usb1/1-3/input/input17
[  764.596940] dvb-usb: schedule remote query interval to 150 msecs.
[  764.596945] dvb-usb: TeVii S660 USB successfully initialized and connected.
[  764.597003] usb 1-3: USB disconnect, address 15
[  764.690492] dvb-usb: TeVii S660 USB successfully deinitialized and disconnected.
[  805.650014] usb 1-3: new high speed USB device using ehci_hcd and address 16
[  805.801344] dvb-usb: found a 'TeVii S660 USB' in cold state, will try to load a firmware
[  805.806439] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw'
[  805.806444] dw2102: start downloading DW210X firmware
[  805.930022] dvb-usb: found a 'TeVii S660 USB' in warm state.
[  805.930113] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[  805.960797] DVB: registering new adapter (TeVii S660 USB)
[  822.328780] dvb-usb: MAC address: 90:90:90:90:90:90
[  822.392778] Invalid probe, probably not a DS3000
[  822.392913] dvb-usb: no frontend was attached by 'TeVii S660 USB'
[  822.456878] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:04.1/usb1/1-3/input/input18
[  822.456977] dvb-usb: schedule remote query interval to 150 msecs.
[  822.456982] dvb-usb: TeVii S660 USB successfully initialized and connected.
[  822.457047] usb 1-3: USB disconnect, address 16
[  822.530509] dvb-usb: TeVii S660 USB successfully deinitialized and disconnected.
[  822.810016] usb 1-3: new high speed USB device using ehci_hcd and address 17
[  822.961035] usb 1-3: config 1 interface 0 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 2
[  822.961884] dvb-usb: found a 'TeVii S660 USB' in cold state, will try to load a firmware
[  822.972663] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw'
[  822.972669] dw2102: start downloading DW210X firmware
[  823.100028] dvb-usb: found a 'TeVii S660 USB' in warm state.
[  823.100117] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[  823.100313] DVB: registering new adapter (TeVii S660 USB)
[  823.228028] dvb-usb: MAC address: 00:18:bd:5c:3e:2a
[  823.230403] DS3000 chip version: 0.192 attached.
[  823.230525] dw2102: Attached ds3000+ds2020!
[  823.230526]
[  823.230532] DVB: registering adapter 0 frontend 0 (Montage Technology DS3000/TS2020)...
[  823.231126] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:04.1/usb1/1-3/input/input19
[  823.231209] dvb-usb: schedule remote query interval to 150 msecs.
[  823.231215] dvb-usb: TeVii S660 USB successfully initialized and connected.
[  824.062027] ds3000_firmware_ondemand: Waiting for firmware upload (dvb-fe-ds3000.fw)...
[  824.066112] ds3000_firmware_ondemand: Waiting for firmware upload(2)...
vr@HTPC040:/dpf/fw$