API tools faq
paste
Advertisement
Guest User

gnemmi

a guest
Jun 25th, 2009
245
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 32.52 KB | None | 0 0
raw download clone embed print report
  1. Copyright (c) 1992-2009 The FreeBSD Project.
  2. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
  3. The Regents of the University of California. All rights reserved.
  4. FreeBSD is a registered trademark of The FreeBSD Foundation.
  5. FreeBSD 8.0-CURRENT-200906 #0: Sun Jun 7 15:27:02 UTC 2009
  6. root@almeida.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
  7. WARNING: WITNESS option enabled, expect reduced performance.
  8. Preloaded elf kernel "/boot/kernel/kernel" at 0xc10de000.
  9. Timecounter "i8254" frequency 1193182 Hz quality 0
  10. Calibrating TSC clock ... TSC clock: 2128016368 Hz
  11. CPU: Intel(R) Celeron(R) CPU 560 @ 2.13GHz (2128.02-MHz 686-class CPU)
  12. Origin = "GenuineIntel" Id = 0x10661 Stepping = 1
  13. Features=0xafebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
  14. Features2=0xe31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM>
  15. AMD Features=0x20100000<NX,LM>
  16. AMD Features2=0x1<LAHF>
  17. TSC: P-state invariant
  18.  
  19. Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries
  20. 2nd-level cache: 1 MB, 4-way set associative, 64-byte line size
  21. 1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size
  22. 1st-level data cache: 32 KB, 8-way set associative, 64 byte line size
  23. L2 cache: 1024 kbytes, 4-way associative, 64 bytes/line
  24. real memory = 1073741824 (1024 MB)
  25. Physical memory chunk(s):
  26. 0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages)
  27. 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
  28. 0x0000000001425000 - 0x000000003e549fff, 1024610304 bytes (250149 pages)
  29. avail memory = 1023275008 (975 MB)
  30. Table 'FACP' at 0x3f66f09c
  31. Table 'HPET' at 0x3f66f300
  32. Table 'APIC' at 0x3f66f400
  33. MADT: Found table at 0x3f66f400
  34. APIC: Using the MADT enumerator.
  35. MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
  36. SMP: Added CPU 0 (AP)
  37. MADT: Found CPU APIC ID 1 ACPI ID 1: disabled
  38. ACPI APIC Table: <DELL M09 >
  39. APIC: CPU 0 has ACPI ID 0
  40. bios32: Found BIOS32 Service Directory header at 0xc00ffa00
  41. bios32: Entry = 0xffa10 (c00ffa10) Rev = 0 Len = 1
  42. pcibios: PCI BIOS entry at 0xf0000+0xb1d6
  43. pnpbios: Found PnP BIOS data at 0xc00fe2d0
  44. pnpbios: Entry = f0000:e2f4 Rev = 1.0
  45. pnpbios: Event flag at 4b4
  46. Other BIOS signatures found:
  47. ULE: setup cpu 0
  48. ACPI: RSDP 0xfc080 00024 (v2 DELL )
  49. ACPI: XSDT 0x3f66f200 0005C (v1 DELL M09 27D9010F ASL 00000061)
  50. ACPI: FACP 0x3f66f09c 000F4 (v4 DELL M09 27D9010F ASL 00000061)
  51. ACPI: DSDT 0x3f66f800 0567B (v2 INT430 SYSFexxx 00001001 INTL 20050624)
  52. ACPI: FACS 0x3f67e000 00040
  53. ACPI: HPET 0x3f66f300 00038 (v1 DELL M09 00000001 ASL 00000061)
  54. ACPI: APIC 0x3f66f400 00068 (v1 DELL M09 27D9010F ASL 00000047)
  55. ACPI: MCFG 0x3f66f3c0 0003E (v16 DELL M09 27D9010F ASL 00000061)
  56. ACPI: SLIC 0x3f66f49c 00176 (v1 DELL M09 27D9010F ASL 00000061)
  57. ACPI: SSDT 0x3f66e253 005E5 (v1 PmRef Cpu0Cst 00003001 INTL 20050624)
  58. ACPI: SSDT 0x3f66dd87 004CC (v1 PmRef CpuPm 00003000 INTL 20050624)
  59. MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000
  60. ioapic0: Changing APIC ID to 1
  61. ioapic0: Routing external 8259A's -> intpin 0
  62. MADT: Interrupt override: source 0, irq 2
  63. ioapic0: Routing IRQ 0 -> intpin 2
  64. MADT: Interrupt override: source 9, irq 9
  65. ioapic0: intpin 9 trigger: level
  66. lapic0: Routing NMI -> LINT1
  67. lapic0: LINT1 trigger: edge
  68. lapic0: LINT1 polarity: high
  69. MADT: Ignoring local NMI routed to ACPI CPU 1
  70. ioapic0 <Version 2.0> irqs 0-23 on motherboard
  71. cpu0 BSP:
  72. ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  73. lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  74. timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400
  75. wlan: <802.11 Link Layer>
  76. random: <entropy source, Software, Yarrow>
  77. nfslock: pseudo-device
  78. kbd: new array size 4
  79. kbd1 at kbdmux0
  80. mem: <memory>
  81. Pentium Pro MTRR support enabled
  82. io: <I/O>
  83. null: <null device, zero device>
  84. hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (Jun 7 2009 15:24:10)
  85. npx0: INT 16 interface
  86. acpi0: <DELL M09 > on motherboard
  87. PCIe: Memory Mapped configuration base @ 0xf8000000
  88. pcibios: BIOS version 2.10
  89. ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
  90. acpi0: [MPSAFE]
  91. acpi0: [ITHREAD]
  92. acpi_bus_number: root bus has no _BBN, assuming 0
  93. AcpiOsDerivePciId: \\_SB_.PCI0.VID_.IGDP -> bus 0 dev 2 func 0
  94. acpi_bus_number: root bus has no _BBN, assuming 0
  95. AcpiOsDerivePciId: \\_SB_.PCI0.MCHP -> bus 0 dev 0 func 0
  96. ACPI: SSDT 0x3f67e080 00043 (v1 LMPWR DELLLOM 00001001 INTL 20050624)
  97. acpi0: wakeup code va 0xc418e000 pa 0x1000
  98. acpi_bus_number: root bus has no _BBN, assuming 0
  99. AcpiOsDerivePciId: \\_SB_.PCI0.ISAB.PIR1 -> bus 0 dev 31 func 0
  100. acpi_bus_number: root bus has no _BBN, assuming 0
  101. AcpiOsDerivePciId: \\_SB_.PCI0.ISAB.PIR2 -> bus 0 dev 31 func 0
  102. acpi_hpet0: vend: 0x8086 rev: 0x1 num: 2 hz: 14318180 opts: legacy_route 64-bit
  103. Timecounter "HPET" frequency 14318180 Hz quality 900
  104. acpi0: reservation of 0, 9f000 (3) failed
  105. acpi0: reservation of 100000, 3f56d800 (3) failed
  106. ACPI timer: 1/2 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
  107. Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
  108. acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
  109. pci_link0: Index IRQ Rtd Ref IRQs
  110. Initial Probe 0 11 N 0 9 10 11
  111. Validation 0 11 N 0 9 10 11
  112. After Disable 0 255 N 0 9 10 11
  113. pci_link1: Index IRQ Rtd Ref IRQs
  114. Initial Probe 0 10 N 0 5 7
  115. Validation 0 255 N 0 5 7
  116. After Disable 0 255 N 0 5 7
  117. pci_link2: Index IRQ Rtd Ref IRQs
  118. Initial Probe 0 4 N 0 9 10 11
  119. Validation 0 255 N 0 9 10 11
  120. After Disable 0 255 N 0 9 10 11
  121. pci_link3: Index IRQ Rtd Ref IRQs
  122. Initial Probe 0 5 N 0 5 7 9 10 11
  123. Validation 0 5 N 0 5 7 9 10 11
  124. After Disable 0 255 N 0 5 7 9 10 11
  125. pci_link4: Index IRQ Rtd Ref IRQs
  126. Initial Probe 0 10 N 0 3 4 5 6 7 9 10 11 12 14 15
  127. Validation 0 10 N 0 3 4 5 6 7 9 10 11 12 14 15
  128. After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
  129. pci_link5: Index IRQ Rtd Ref IRQs
  130. Initial Probe 0 9 N 0 3 4 5 6 7 9 10 11 12 14 15
  131. Validation 0 9 N 0 3 4 5 6 7 9 10 11 12 14 15
  132. After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
  133. pci_link6: Index IRQ Rtd Ref IRQs
  134. Initial Probe 0 7 N 0 3 4 5 6 7 9 10 11 12 14 15
  135. Validation 0 7 N 0 3 4 5 6 7 9 10 11 12 14 15
  136. After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
  137. pci_link7: Index IRQ Rtd Ref IRQs
  138. Initial Probe 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
  139. Validation 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
  140. After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
  141. pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
  142. pci0: <ACPI PCI bus> on pcib0
  143. pci0: domain=0, physical bus=0
  144. found-> vendor=0x8086, dev=0x2a00, revid=0x0c
  145. domain=0, bus=0, slot=0, func=0
  146. class=06-00-00, hdrtype=0x00, mfdev=0
  147. cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
  148. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  149. found-> vendor=0x8086, dev=0x2a02, revid=0x0c
  150. domain=0, bus=0, slot=2, func=0
  151. class=03-00-00, hdrtype=0x00, mfdev=1
  152. cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
  153. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  154. intpin=a, irq=11
  155. powerspec 3 supports D0 D3 current D0
  156. MSI supports 1 message
  157. map[10]: type Memory, range 64, base 0xf6e00000, size 20, enabled
  158. map[18]: type Prefetchable Memory, range 64, base 0xe0000000, size 28, enabled
  159. map[20]: type I/O Port, range 32, base 0xeff8, size 3, enabled
  160. pcib0: matched entry for 0.2.INTA
  161. pcib0: slot 2 INTA hardwired to IRQ 16
  162. found-> vendor=0x8086, dev=0x2a03, revid=0x0c
  163. domain=0, bus=0, slot=2, func=1
  164. class=03-80-00, hdrtype=0x00, mfdev=1
  165. cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
  166. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  167. powerspec 3 supports D0 D3 current D0
  168. map[10]: type Memory, range 64, base 0xf6f00000, size 20, enabled
  169. found-> vendor=0x8086, dev=0x2834, revid=0x02
  170. domain=0, bus=0, slot=26, func=0
  171. class=0c-03-00, hdrtype=0x00, mfdev=1
  172. cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
  173. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  174. intpin=a, irq=10
  175. map[20]: type I/O Port, range 32, base 0x6f20, size 5, enabled
  176. pcib0: matched entry for 0.26.INTA
  177. pcib0: slot 26 INTA hardwired to IRQ 20
  178. found-> vendor=0x8086, dev=0x2835, revid=0x02
  179. domain=0, bus=0, slot=26, func=1
  180. class=0c-03-00, hdrtype=0x00, mfdev=0
  181. cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
  182. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  183. intpin=b, irq=9
  184. map[20]: type I/O Port, range 32, base 0x6f00, size 5, enabled
  185. pcib0: matched entry for 0.26.INTB
  186. pcib0: slot 26 INTB hardwired to IRQ 21
  187. found-> vendor=0x8086, dev=0x283a, revid=0x02
  188. domain=0, bus=0, slot=26, func=7
  189. class=0c-03-20, hdrtype=0x00, mfdev=0
  190. cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
  191. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  192. intpin=c, irq=7
  193. powerspec 2 supports D0 D3 current D0
  194. map[10]: type Memory, range 32, base 0xfed1c400, size 10, enabled
  195. pcib0: matched entry for 0.26.INTC
  196. pcib0: slot 26 INTC hardwired to IRQ 22
  197. found-> vendor=0x8086, dev=0x284b, revid=0x02
  198. domain=0, bus=0, slot=27, func=0
  199. class=04-03-00, hdrtype=0x00, mfdev=0
  200. cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords)
  201. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  202. intpin=a, irq=9
  203. powerspec 2 supports D0 D3 current D0
  204. MSI supports 1 message, 64 bit
  205. map[10]: type Memory, range 64, base 0xf6dfc000, size 14, enabled
  206. pcib0: matched entry for 0.27.INTA
  207. pcib0: slot 27 INTA hardwired to IRQ 21
  208. found-> vendor=0x8086, dev=0x283f, revid=0x02
  209. domain=0, bus=0, slot=28, func=0
  210. class=06-04-00, hdrtype=0x01, mfdev=1
  211. cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
  212. lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
  213. intpin=a, irq=255
  214. powerspec 2 supports D0 D3 current D0
  215. MSI supports 1 message
  216. found-> vendor=0x8086, dev=0x2841, revid=0x02
  217. domain=0, bus=0, slot=28, func=1
  218. class=06-04-00, hdrtype=0x01, mfdev=1
  219. cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
  220. lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
  221. intpin=b, irq=255
  222. powerspec 2 supports D0 D3 current D0
  223. MSI supports 1 message
  224. found-> vendor=0x8086, dev=0x2845, revid=0x02
  225. domain=0, bus=0, slot=28, func=3
  226. class=06-04-00, hdrtype=0x01, mfdev=1
  227. cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
  228. lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
  229. intpin=d, irq=255
  230. powerspec 2 supports D0 D3 current D0
  231. MSI supports 1 message
  232. found-> vendor=0x8086, dev=0x2849, revid=0x02
  233. domain=0, bus=0, slot=28, func=5
  234. class=06-04-00, hdrtype=0x01, mfdev=1
  235. cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
  236. lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
  237. intpin=b, irq=255
  238. powerspec 2 supports D0 D3 current D0
  239. MSI supports 1 message
  240. found-> vendor=0x8086, dev=0x2830, revid=0x02
  241. domain=0, bus=0, slot=29, func=0
  242. class=0c-03-00, hdrtype=0x00, mfdev=1
  243. cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
  244. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  245. intpin=a, irq=10
  246. map[20]: type I/O Port, range 32, base 0x6f80, size 5, enabled
  247. pcib0: matched entry for 0.29.INTA
  248. pcib0: slot 29 INTA hardwired to IRQ 20
  249. found-> vendor=0x8086, dev=0x2831, revid=0x02
  250. domain=0, bus=0, slot=29, func=1
  251. class=0c-03-00, hdrtype=0x00, mfdev=0
  252. cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
  253. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  254. intpin=b, irq=9
  255. map[20]: type I/O Port, range 32, base 0x6f60, size 5, enabled
  256. pcib0: matched entry for 0.29.INTB
  257. pcib0: slot 29 INTB hardwired to IRQ 21
  258. found-> vendor=0x8086, dev=0x2832, revid=0x02
  259. domain=0, bus=0, slot=29, func=2
  260. class=0c-03-00, hdrtype=0x00, mfdev=0
  261. cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
  262. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  263. intpin=c, irq=7
  264. map[20]: type I/O Port, range 32, base 0x6f40, size 5, enabled
  265. pcib0: matched entry for 0.29.INTC
  266. pcib0: slot 29 INTC hardwired to IRQ 22
  267. found-> vendor=0x8086, dev=0x2836, revid=0x02
  268. domain=0, bus=0, slot=29, func=7
  269. class=0c-03-20, hdrtype=0x00, mfdev=0
  270. cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
  271. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  272. intpin=a, irq=10
  273. powerspec 2 supports D0 D3 current D0
  274. map[10]: type Memory, range 32, base 0xfed1c000, size 10, enabled
  275. pcib0: matched entry for 0.29.INTA
  276. pcib0: slot 29 INTA hardwired to IRQ 20
  277. found-> vendor=0x8086, dev=0x2448, revid=0xf2
  278. domain=0, bus=0, slot=30, func=0
  279. class=06-04-01, hdrtype=0x01, mfdev=0
  280. cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
  281. lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
  282. found-> vendor=0x8086, dev=0x2815, revid=0x02
  283. domain=0, bus=0, slot=31, func=0
  284. class=06-01-00, hdrtype=0x00, mfdev=1
  285. cmdreg=0x0107, statreg=0x0210, cachelnsz=0 (dwords)
  286. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  287. found-> vendor=0x8086, dev=0x2850, revid=0x02
  288. domain=0, bus=0, slot=31, func=1
  289. class=01-01-8a, hdrtype=0x00, mfdev=0
  290. cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
  291. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  292. intpin=a, irq=11
  293. map[20]: type I/O Port, range 32, base 0x6fa0, size 4, enabled
  294. pcib0: matched entry for 0.31.INTA
  295. pcib0: slot 31 INTA hardwired to IRQ 16
  296. found-> vendor=0x8086, dev=0x2829, revid=0x02
  297. domain=0, bus=0, slot=31, func=2
  298. class=01-06-01, hdrtype=0x00, mfdev=0
  299. cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
  300. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  301. intpin=b, irq=10
  302. powerspec 3 supports D0 D3 current D0
  303. MSI supports 4 messages
  304. map[10]: type I/O Port, range 32, base 0x6eb0, size 3, enabled
  305. map[14]: type I/O Port, range 32, base 0x6eb8, size 2, enabled
  306. map[18]: type I/O Port, range 32, base 0x6ec0, size 3, enabled
  307. map[1c]: type I/O Port, range 32, base 0x6ec8, size 2, enabled
  308. map[20]: type I/O Port, range 32, base 0x6ee0, size 5, enabled
  309. map[24]: type Memory, range 32, base 0xf6dfb800, size 11, enabled
  310. pcib0: matched entry for 0.31.INTB
  311. pcib0: slot 31 INTB hardwired to IRQ 17
  312. found-> vendor=0x8086, dev=0x283e, revid=0x02
  313. domain=0, bus=0, slot=31, func=3
  314. class=0c-05-00, hdrtype=0x00, mfdev=0
  315. cmdreg=0x0103, statreg=0x0280, cachelnsz=0 (dwords)
  316. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  317. intpin=b, irq=10
  318. map[10]: type Memory, range 32, base 0xf6dfb700, size 8, enabled
  319. map[20]: type I/O Port, range 32, base 0x10c0, size 5, enabled
  320. pcib0: matched entry for 0.31.INTB
  321. pcib0: slot 31 INTB hardwired to IRQ 17
  322. vgapci0: <VGA-compatible display> port 0xeff8-0xefff mem 0xf6e00000-0xf6efffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
  323. agp0: <Intel GM965 SVGA controller> on vgapci0
  324. vgapci0: Reserved 0x10000000 bytes for rid 0x18 type 3 at 0xe0000000
  325. vgapci0: Reserved 0x100000 bytes for rid 0x10 type 3 at 0xf6e00000
  326. agp0: detected 7676k stolen memory
  327. agp0: aperture size is 256M
  328. vgapci1: <VGA-compatible display> mem 0xf6f00000-0xf6ffffff at device 2.1 on pci0
  329. uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0x6f20-0x6f3f irq 20 at device 26.0 on pci0
  330. uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x6f20
  331. ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 0 vector 49
  332. uhci0: [MPSAFE]
  333. uhci0: [ITHREAD]
  334. uhci0: LegSup = 0x0f00
  335. usbus0: <Intel 82801H (ICH8) USB controller USB-D> on uhci0
  336. uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0x6f00-0x6f1f irq 21 at device 26.1 on pci0
  337. uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x6f00
  338. ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 50
  339. uhci1: [MPSAFE]
  340. uhci1: [ITHREAD]
  341. uhci1: LegSup = 0x0f00
  342. usbus1: <Intel 82801H (ICH8) USB controller USB-E> on uhci1
  343. ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem 0xfed1c400-0xfed1c7ff irq 22 at device 26.7 on pci0
  344. ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfed1c400
  345. ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 0 vector 51
  346. ehci0: [MPSAFE]
  347. ehci0: [ITHREAD]
  348. usbus2: EHCI version 1.0
  349. usbus2: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> on ehci0
  350. pci0: <multimedia, HDA> at device 27.0 (no driver attached)
  351. pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
  352. pcib1: domain 0
  353. pcib1: secondary bus 11
  354. pcib1: subordinate bus 11
  355. pcib1: I/O decode 0xf000-0xfff
  356. pcib1: no prefetched decode
  357. pci11: <ACPI PCI bus> on pcib1
  358. pci11: domain=0, physical bus=11
  359. pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0
  360. pcib2: domain 0
  361. pcib2: secondary bus 12
  362. pcib2: subordinate bus 12
  363. pcib2: I/O decode 0xf000-0xfff
  364. pcib2: memory decode 0xf6c00000-0xf6cfffff
  365. pcib2: no prefetched decode
  366. pci12: <ACPI PCI bus> on pcib2
  367. pci12: domain=0, physical bus=12
  368. found-> vendor=0x14e4, dev=0x4315, revid=0x01
  369. domain=0, bus=12, slot=0, func=0
  370. class=02-80-00, hdrtype=0x00, mfdev=0
  371. cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords)
  372. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  373. intpin=a, irq=10
  374. powerspec 3 supports D0 D1 D2 D3 current D0
  375. MSI supports 1 message, 64 bit
  376. map[10]: type Memory, range 64, base 0xf6cfc000, size 14, enabled
  377. pcib2: requested memory range 0xf6cfc000-0xf6cfffff: good
  378. pcib2: matched entry for 12.0.INTA
  379. pcib2: slot 0 INTA hardwired to IRQ 17
  380. pci12: <network> at device 0.0 (no driver attached)
  381. pcib3: <ACPI PCI-PCI bridge> at device 28.3 on pci0
  382. pcib3: domain 0
  383. pcib3: secondary bus 13
  384. pcib3: subordinate bus 14
  385. pcib3: I/O decode 0xd000-0xdfff
  386. pcib3: memory decode 0xf6a00000-0xf6bfffff
  387. pcib3: prefetched decode 0xf0000000-0xf01fffff
  388. pci13: <ACPI PCI bus> on pcib3
  389. pci13: domain=0, physical bus=13
  390. pcib4: <ACPI PCI-PCI bridge> at device 28.5 on pci0
  391. pcib4: domain 0
  392. pcib4: secondary bus 9
  393. pcib4: subordinate bus 9
  394. pcib4: I/O decode 0xf000-0xfff
  395. pcib4: memory decode 0xf6900000-0xf69fffff
  396. pcib4: no prefetched decode
  397. pci9: <ACPI PCI bus> on pcib4
  398. pci9: domain=0, physical bus=9
  399. found-> vendor=0x14e4, dev=0x1713, revid=0x02
  400. domain=0, bus=9, slot=0, func=0
  401. class=02-00-00, hdrtype=0x00, mfdev=0
  402. cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords)
  403. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  404. intpin=a, irq=10
  405. powerspec 3 supports D0 D3 current D0
  406. MSI supports 1 message, 64 bit
  407. map[10]: type Memory, range 64, base 0xf69f0000, size 16, enabled
  408. pcib4: requested memory range 0xf69f0000-0xf69fffff: good
  409. pcib4: matched entry for 9.0.INTA
  410. pcib4: slot 0 INTA hardwired to IRQ 17
  411. bge0: <Broadcom BCM5906 A2, ASIC rev. 0xc002> mem 0xf69f0000-0xf69fffff irq 17 at device 0.0 on pci9
  412. bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xf69f0000
  413. bge0: adjust device control 0x2000 -> 0x5000
  414. bge0: attempting to allocate 1 MSI vectors (1 supported)
  415. bge0: using IRQ 256 for MSI
  416. bge0: CHIP ID 0xc0020000; ASIC REV 0x0c; CHIP REV 0xc0; PCI-E
  417. miibus0: <MII bus> on bge0
  418. brgphy0: <BCM5906 10/100baseTX PHY> PHY 1 on miibus0
  419. brgphy0: OUI 0x000af7, model 0x0004, rev. 0
  420. brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
  421. bge0: bpf attached
  422. bge0: Ethernet address: 00:23:ae:04:ba:ca
  423. msi: Assigning MSI IRQ 256 to local APIC 0 vector 52
  424. bge0: [MPSAFE]
  425. bge0: [ITHREAD]
  426. uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0x6f80-0x6f9f irq 20 at device 29.0 on pci0
  427. uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x6f80
  428. uhci2: [MPSAFE]
  429. uhci2: [ITHREAD]
  430. uhci2: LegSup = 0x0f00
  431. usbus3: <Intel 82801H (ICH8) USB controller USB-A> on uhci2
  432. uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0x6f60-0x6f7f irq 21 at device 29.1 on pci0
  433. uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x6f60
  434. uhci3: [MPSAFE]
  435. uhci3: [ITHREAD]
  436. uhci3: LegSup = 0x0f00
  437. usbus4: <Intel 82801H (ICH8) USB controller USB-B> on uhci3
  438. uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0x6f40-0x6f5f irq 22 at device 29.2 on pci0
  439. uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0x6f40
  440. uhci4: [MPSAFE]
  441. uhci4: [ITHREAD]
  442. uhci4: LegSup = 0x0f00
  443. usbus5: <Intel 82801H (ICH8) USB controller USB-C> on uhci4
  444. ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem 0xfed1c000-0xfed1c3ff irq 20 at device 29.7 on pci0
  445. ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfed1c000
  446. ehci1: [MPSAFE]
  447. ehci1: [ITHREAD]
  448. usbus6: EHCI version 1.0
  449. usbus6: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> on ehci1
  450. pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
  451. pcib5: domain 0
  452. pcib5: secondary bus 3
  453. pcib5: subordinate bus 3
  454. pcib5: I/O decode 0xf000-0xfff
  455. pcib5: memory decode 0xf6800000-0xf68fffff
  456. pcib5: no prefetched decode
  457. pcib5: Subtractively decoded bridge.
  458. pci3: <ACPI PCI bus> on pcib5
  459. pci3: domain=0, physical bus=3
  460. found-> vendor=0x1180, dev=0x0832, revid=0x05
  461. domain=0, bus=3, slot=1, func=0
  462. class=0c-00-10, hdrtype=0x00, mfdev=1
  463. cmdreg=0x0106, statreg=0x0210, cachelnsz=16 (dwords)
  464. lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
  465. intpin=a, irq=5
  466. powerspec 2 supports D0 D1 D2 D3 current D0
  467. map[10]: type Memory, range 32, base 0xf68ff800, size 11, enabled
  468. pcib5: requested memory range 0xf68ff800-0xf68fffff: good
  469. pcib5: matched entry for 3.1.INTA
  470. pcib5: slot 1 INTA hardwired to IRQ 19
  471. found-> vendor=0x1180, dev=0x0822, revid=0x22
  472. domain=0, bus=3, slot=1, func=1
  473. class=08-05-01, hdrtype=0x00, mfdev=1
  474. cmdreg=0x0106, statreg=0x0210, cachelnsz=16 (dwords)
  475. lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  476. intpin=b, irq=4
  477. powerspec 2 supports D0 D1 D2 D3 current D0
  478. map[10]: type Memory, range 32, base 0xf68ff500, size 8, enabled
  479. pcib5: requested memory range 0xf68ff500-0xf68ff5ff: good
  480. pcib5: matched entry for 3.1.INTB
  481. pcib5: slot 1 INTB hardwired to IRQ 18
  482. found-> vendor=0x1180, dev=0x0592, revid=0x12
  483. domain=0, bus=3, slot=1, func=2
  484. class=08-80-00, hdrtype=0x00, mfdev=1
  485. cmdreg=0x0106, statreg=0x0210, cachelnsz=16 (dwords)
  486. lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  487. intpin=b, irq=4
  488. powerspec 2 supports D0 D1 D2 D3 current D0
  489. map[10]: type Memory, range 32, base 0xf68ff600, size 8, enabled
  490. pcib5: requested memory range 0xf68ff600-0xf68ff6ff: good
  491. pcib5: matched entry for 3.1.INTB
  492. pcib5: slot 1 INTB hardwired to IRQ 18
  493. found-> vendor=0x1180, dev=0x0852, revid=0x12
  494. domain=0, bus=3, slot=1, func=3
  495. class=08-80-00, hdrtype=0x00, mfdev=1
  496. cmdreg=0x0106, statreg=0x0210, cachelnsz=16 (dwords)
  497. lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  498. intpin=b, irq=4
  499. powerspec 2 supports D0 D1 D2 D3 current D0
  500. map[10]: type Memory, range 32, base 0xf68ff700, size 8, enabled
  501. pcib5: requested memory range 0xf68ff700-0xf68ff7ff: good
  502. pcib5: matched entry for 3.1.INTB
  503. pcib5: slot 1 INTB hardwired to IRQ 18
  504. fwohci0: vendor=1180, dev=832
  505. fwohci0: vendor=1180, dev=832
  506. fwohci0: <1394 Open Host Controller Interface> mem 0xf68ff800-0xf68fffff irq 19 at device 1.0 on pci3
  507. fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xf68ff800
  508. ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 53
  509. fwohci0: [MPSAFE]
  510. fwohci0: [ITHREAD]
  511. fwohci0: OHCI version 1.10 (ROM=0)
  512. fwohci0: No. of Isochronous channels is 4.
  513. fwohci0: EUI64 44:4f:c0:00:30:49:95:c1
  514. fwohci0: Phy 1394a available S400, 1 ports.
  515. fwohci0: Link S400, max_rec 2048 bytes.
  516. firewire0: <IEEE1394(FireWire) bus> on fwohci0
  517. dcons_crom0: <dcons configuration ROM> on firewire0
  518. dcons_crom0: bus_addr 0x3e528000
  519. fwe0: <Ethernet over FireWire> on firewire0
  520. if_fwe0: Fake Ethernet address: 46:4f:c0:49:95:c1
  521. fwe0: bpf attached
  522. fwe0: Ethernet address: 46:4f:c0:49:95:c1
  523. fwip0: <IP over FireWire> on firewire0
  524. fwip0: bpf attached
  525. fwip0: Firewire address: 44:4f:c0:00:30:49:95:c1 @ 0xfffe00000000, S400, maxrec 2048
  526. sbp0: <SBP-2/SCSI over FireWire> on firewire0
  527. fwohci0: Initiate bus reset
  528. fwohci0: fwohci_intr_core: BUS reset
  529. fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
  530. pci3: <base peripheral, SD host controller> at device 1.1 (no driver attached)
  531. pci3: <base peripheral> at device 1.2 (no driver attached)
  532. pci3: <base peripheral> at device 1.3 (no driver attached)
  533. isab0: <PCI-ISA bridge> at device 31.0 on pci0
  534. isa0: <ISA bus> on isab0
  535. atapci0: <Intel ICH8M UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x6fa0-0x6faf irq 16 at device 31.1 on pci0
  536. atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x6fa0
  537. ata0: <ATA channel 0> on atapci0
  538. atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
  539. atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
  540. ata0: reset tp1 mask=03 ostat0=50 ostat1=00
  541. ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
  542. ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
  543. ata0: reset tp2 stat0=00 stat1=00 devices=0x10000
  544. ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 54
  545. ata0: [MPSAFE]
  546. ata0: [ITHREAD]
  547. atapci1: <Intel ICH8M SATA300 controller> port 0x6eb0-0x6eb7,0x6eb8-0x6ebb,0x6ec0-0x6ec7,0x6ec8-0x6ecb,0x6ee0-0x6eff mem 0xf6dfb800-0xf6dfbfff irq 17 at device 31.2 on pci0
  548. atapci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x6ee0
  549. ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 55
  550. atapci1: [MPSAFE]
  551. atapci1: [ITHREAD]
  552. atapci1: Reserved 0x800 bytes for rid 0x24 type 3 at 0xf6dfb800
  553. atapci1: AHCI called from vendor specific driver
  554. atapci1: AHCI v1.10 controller with 3 3Gbps ports, PM not supported
  555. atapci1: Caps: 64bit NCQ SNTF ALP AL CLO 3Gbps PMD SSC PSC 32cmd CCC EM 3ports
  556. ata2: <ATA channel 0> on atapci1
  557. ata2: AHCI reset...
  558. ata2: hardware reset ...
  559. ata2: SATA connect time=0ms status=00000123
  560. ata2: ready wait time=6ms
  561. ata2: software reset port 0...
  562. ata2: ready wait time=0ms
  563. ata2: SIGNATURE: 00000101
  564. ata2: AHCI reset done: devices=00000001
  565. ata2: [MPSAFE]
  566. ata2: [ITHREAD]
  567. ata3: <ATA channel 2> on atapci1
  568. ata3: AHCI reset...
  569. ata3: hardware reset ...
  570. ata3: SATA connect timeout status=00000000
  571. ata3: AHCI reset done: phy reset found no device
  572. ata3: [MPSAFE]
  573. ata3: [ITHREAD]
  574. pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
  575. acpi_lid0: <Control Method Lid Switch> on acpi0
  576. acpi_button0: <Power Button> on acpi0
  577. acpi_button1: <Sleep Button> on acpi0
  578. acpi_acad0: <AC Adapter> on acpi0
  579. battery0: <ACPI Control Method Battery> on acpi0
  580. acpi_tz0: <Thermal Zone> on acpi0
  581. psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
  582. atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64,0x62,0x66 irq 1 on acpi0
  583. atkbd0: <AT Keyboard> irq 1 on atkbdc0
  584. atkbd: the current kbd controller command byte 0065
  585. atkbd: keyboard ID 0x41ab (2)
  586. kbd0 at atkbd0
  587. kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
  588. ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 56
  589. atkbd0: [GIANT-LOCKED]
  590. atkbd0: [ITHREAD]
  591. psm0: current command byte:0065
  592. psm0: <PS/2 Mouse> irq 12 on atkbdc0
  593. ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 57
  594. psm0: [GIANT-LOCKED]
  595. psm0: [ITHREAD]
  596. psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
  597. psm0: config:00000000, flags:00000008, packet size:3
  598. psm0: syncmask:c0, syncbits:00
  599. atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x77 irq 8 on acpi0
  600. atrtc0: registered as a time-of-day clock (resolution 1000000us)
  601. cpu0: <ACPI CPU> on acpi0
  602. p4tcc0: <CPU Frequency Thermal Control> on cpu0
  603. unknown: status reg test failed ff
  604. unknown: status reg test failed ff
  605. unknown: status reg test failed ff
  606. unknown: status reg test failed ff
  607. unknown: status reg test failed ff
  608. unknown: status reg test failed ff
  609. ahc_isa_probe 0: ioport 0xc00 alloc failed
  610. pnp_identify: Trying Read_Port at 203
  611. pnp_identify: Trying Read_Port at 243
  612. pnp_identify: Trying Read_Port at 283
  613. pnp_identify: Trying Read_Port at 2c3
  614. pnp_identify: Trying Read_Port at 303
  615. pnp_identify: Trying Read_Port at 343
  616. pnp_identify: Trying Read_Port at 383
  617. pnp_identify: Trying Read_Port at 3c3
  618. PNP Identify complete
  619. ex_isa_identify()
  620. isa_probe_children: disabling PnP devices
  621. pmtimer0 on isa0
  622. ata: ata0 already exists; skipping it
  623. atkbdc: atkbdc0 already exists; skipping it
  624. atrtc: atrtc0 already exists; skipping it
  625. sc: sc0 already exists; skipping it
  626. isa_probe_children: probing non-PnP devices
  627. orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xcf000-0xcffff pnpid ORM0000 on isa0
  628. sc0: <System console> at flags 0x100 on isa0
  629. sc0: VGA <16 virtual consoles, flags=0x300>
  630. sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
  631. vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
  632. ata1 failed to probe at port 0x170 irq 15 on isa0
  633. fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
  634. ppc0: parallel port not found.
  635. ppc0: <Parallel port> failed to probe at irq 7 on isa0
  636. uart0: <ns8250> failed to probe at port 0x3f8-0x3ff irq 4 on isa0
  637. uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0
  638. isa_probe_children: probing PnP devices
  639. Device configuration finished.
  640. procfs registered
  641. lapic: Divisor 2, Frequency 66500530 hz
  642. Timecounter "TSC" frequency 2128016368 Hz quality 800
  643. Timecounters tick every 1.000 msec
  644. lo0: bpf attached
  645. firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
  646. firewire0: bus manager 0
  647. hptrr: no controller detected.
  648. ata0: Identifying devices: 00010000
  649. ata0: New devices: 00010000
  650. usbus3: 12Mbps Full Speed USB v1.0
  651. usbus4: 12Mbps Full Speed USB v1.0
  652. usbus5: 12Mbps Full Speed USB v1.0
  653. usbus6: 480Mbps High Speed USB v2.0
  654. usbus0: 12Mbps Full Speed USB v1.0
  655. usbus1: 12Mbps Full Speed USB v1.0
  656. usbus2: 480Mbps High Speed USB v2.0
  657. acpi_acad0: acline initialization start
  658. acpi_acad0: On Line
  659. acpi_acad0: acline initialization done, tried 1 times
  660. battery0: battery initialization start
  661. ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=80 wire
  662. acd0: setting PIO4 on ICH8M chip
  663. acd0: setting UDMA33 on ICH8M chip
  664. ugen3.1: <Intel> at usbus3
  665. uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
  666. ugen4.1: <Intel> at usbus4
  667. uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
  668. ugen5.1: <Intel> at usbus5
  669. uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
  670. ugen6.1: <Intel> at usbus6
  671. uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
  672. ugen0.1: <Intel> at usbus0
  673. uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
  674. ugen1.1: <Intel> at usbus1
  675. uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
  676. ugen2.1: <Intel> at usbus2
  677. uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
  678. acd0: <MATSHITA DVD+/-RW UJ-875S/D200> DVDR drive at ata0 as master
  679. acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, UDMA33
  680. acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
  681. acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
  682. acd0: Audio: play, 256 volume levels
  683. acd0: Mechanism: ejectable caddy, unlocked
  684. acd0: Medium: no/blank disc
  685. ata2: Identifying devices: 00000001
  686. ata2: New devices: 00000001
  687. ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
  688. ad4: 238475MB <Seagate ST9250827AS 3.ADB> at ata2-master SATA300
  689. ad4: 488397168 sectors [484521C/16H/63S] 16 sectors/interrupt 1 depth queue
  690. GEOM: new disk ad4
  691. ad4: Intel check1 failed
  692. ad4: Adaptec check1 failed
  693. uhub0: 2 ports with 2 removable, self powered
  694. uhub1: 2 ports with 2 removable, self powered
  695. uhub2: 2 ports with 2 removable, self powered
  696. uhub4: 2 ports with 2 removable, self powered
  697. uhub5: 2 ports with 2 removable, self powered
  698. ad4: LSI (v3) check1 failed
  699. ad4: LSI (v2) check1 failed
  700. ad4: FreeBSD check1 failed
  701. ata3: Identifying devices: 00000000
  702. ata3: New devices: 00000000
  703. GEOM: ad4: partition 2 does not start on a track boundary.
  704. GEOM: ad4: partition 2 does not end on a track boundary.
  705. GEOM: ad4s4: geometry does not match label (255h,63s != 16h,63s).
  706. uhub6: 4 ports with 4 removable, self powered
  707. uhub3: 6 ports with 6 removable, self powered
  708. (probe0:sbp0:0:0:0): error 22
  709. (probe0:sbp0:0:0:0): Unretryable Error
  710. (probe1:sbp0:0:1:0): error 22
  711. (probe1:sbp0:0:1:0): Unretryable Error
  712. (probe2:sbp0:0:2:0): error 22
  713. (probe2:sbp0:0:2:0): Unretryable Error
  714. (probe3:sbp0:0:3:0): error 22
  715. (probe3:sbp0:0:3:0): Unretryable Error
  716. (probe4:sbp0:0:4:0): error 22
  717. (probe4:sbp0:0:4:0): Unretryable Error
  718. (probe5:sbp0:0:5:0): error 22
  719. (probe5:sbp0:0:5:0): Unretryable Error
  720. (probe6:sbp0:0:6:0): error 22
  721. (probe6:sbp0:0:6:0): Unretryable Error
  722. ATA PseudoRAID loaded
  723. WARNING: WITNESS option enabled, expect reduced performance.
  724. Trying to mount root from ufs:/dev/ad4s4a
  725. ct_to_ts([2009-06-24 23:09:34]) = 1245884974.000000000
  726. start_init: trying /sbin/init
  727. battery0: battery initialization failed, giving up
  728.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!