Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- U-Boot SPL 2016.11-rc3-00002-g73df7f7 (Nov 04 2016 - 15:20:36)
- Trying to boot from MMC1
- U-Boot 2016.11-rc3-00002-g73df7f7 (Nov 04 2016 - 15:20:36 -0500), Build: jenkins-github_Bootloader-Builder-479
- CPU : AM335X-GP rev 2.1
- I2C: ready
- DRAM: 512 MiB
- Reset Source: Power-on reset has occurred.
- MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
- Using default environment
- Board: BeagleBone Black
- <ethaddr> not set. Validating first E-fuse MAC
- Net: eth0: MII MODE
- Could not get PHY for cpsw: addr 0
- cpsw
- Press SPACE to abort autoboot in 2 seconds
- board_name=[A335BNLT] ...
- board_rev=[GW1A] ...
- switch to partitions #0, OK
- mmc0 is current device
- SD/MMC found on device 0
- ** Bad device 0:2 0x82000000 **
- ** Bad device 0:2 0x82000000 **
- switch to partitions #0, OK
- mmc0 is current device
- Scanning mmc 0:1...
- gpio: pin 56 (gpio 56) value is 0
- gpio: pin 55 (gpio 55) value is 0
- gpio: pin 54 (gpio 54) value is 0
- gpio: pin 53 (gpio 53) value is 1
- switch to partitions #0, OK
- mmc0 is current device
- gpio: pin 54 (gpio 54) value is 1
- Checking for: /uEnv.txt ...
- 1179 bytes read in 7 ms (164.1 KiB/s)
- gpio: pin 55 (gpio 55) value is 1
- Loaded environment from /uEnv.txt
- Importing environment from mmc ...
- Checking if uenvcmd is set ...
- gpio: pin 56 (gpio 56) value is 1
- Running uenvcmd ...
- 1198 bytes read in 25 ms (45.9 KiB/s)
- debug: [/boot/vmlinuz-4.4.30-ti-r64] ...
- 8644992 bytes read in 567 ms (14.5 MiB/s)
- debug: [/boot/initrd.img-4.4.30-ti-r64] ...
- 5228924 bytes read in 355 ms (14 MiB/s)
- debug: [/boot/dtbs/4.4.30-ti-r64/am335x-bonegreen-wireless.dtb] ...
- 62318 bytes read in 97 ms (627 KiB/s)
- debug: [console=tty0 console=ttyO0,115200n8 root=/dev/mmcblk0p1 rootfstype=ext4 rootwait coherent_pool=1M quiet cape_universal=enable] ...
- debug: [bootz 0x82000000 0x88080000:4fc97c 0x88000000] ...
- ## Flattened Device Tree blob at 88000000
- Booting using the fdt blob at 0x88000000
- Using Device Tree in place at 88000000, end 8801236d
- Starting kernel ...
- [ 0.001355] clocksource_probe: no matching clocksources found
- [ 2.080751] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle
- [ 2.324703] omap_voltage_late_init: Voltage driver support not added
- [ 2.340434] PM: Cannot get wkup_m3_ipc handle
- [ 2.590404] bone_capemgr bone_capemgr: slot #0: No cape found
- [ 2.642795] bone_capemgr bone_capemgr: slot #1: No cape found
- [ 2.694726] bone_capemgr bone_capemgr: slot #2: No cape found
- [ 2.733060] bone_capemgr bone_capemgr: Invalid signature 'ffffffff' at slot 3
- [ 2.740262] bone_capemgr bone_capemgr: slot #3: No cape found
- Loading, please wait...
- [ 5.106621] mmc2: error -16 whilst initialising SDIO card
- rootfs: recovering journal
- rootfs: clean, 86933/217728 files, 445561/869376 blocks
- Debian GNU/Linux 8 beaglebone ttyS0
Advertisement
Add Comment
Please, Sign In to add comment