API tools faq
paste
Guest User

Eryk_SBT_dmesg

a guest
Dec 15th, 2012
325
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
Bash 9.76 KB | None | 0 0
raw download clone embed print report
  1. /root$ dmesg
  2. Linux version 2.6.26.8-rt16-332-g5849bfa (adrian@ubuntu) (gcc version 4.4.1 (Sourcery G++ Lite 2010q1-202) ) #1[usb] PREEMPT RT Sun Apr 1 23:12:00 BST 2012
  3. CPU: ARMv6-compatible processor [4117b363] revision 3 (ARMv6TEJ), cr=00c5387f
  4. Machine: Logitech Fab4 Board
  5. Memory policy: ECC disabled, Data cache writeback
  6. On node 0 totalpages: 32768
  7.   DMA zone: 48 pages used for memmap
  8.   DMA zone: 0 pages reserved
  9.   DMA zone: 6096 pages, LIFO batch:0
  10.   Normal zone: 208 pages used for memmap
  11.   Normal zone: 26416 pages, LIFO batch:7
  12.   Movable zone: 0 pages used for memmap
  13. CPU0: D VIPT write-back cache
  14. CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
  15. CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
  16. Real-Time Preemption Support (C) 2004-2007 Ingo Molnar
  17. Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
  18. Kernel command line: console=ttymxc0,115200 noinitrd init=/linuxrc ubi.mtd=1 root=/dev/mtdblock:cramfs
  19. Preemptible RCU implementation.
  20. MXC IRQ initialized
  21. PID hash table entries: 512 (order: 9, 2048 bytes)
  22. MXC GPT timer initialized, rate = 16625000
  23. WARNING: Clock divider has been truncated, clock error 150 [ps] per 60 [ns]
  24. Console: colour dummy device 80x30
  25. Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  26. Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  27. Memory: 128MB = 128MB total
  28. Memory: 125680KB available (3752K code, 319K data, 152K init)
  29. Calibrating delay loop... 530.84 BogoMIPS (lpj=2654208)
  30. Mount-cache hash table entries: 512
  31. CPU: Testing write buffer coherency: ok
  32. net_namespace: 276 bytes
  33. NET: Registered protocol family 16
  34. L2X0 cache controller enabled
  35. CPU is i.MX0 Revision 0.5
  36. Clock input source is 24000000
  37. MXC GPIO hardware
  38. Reset status: Watchdog timeout
  39. Using SDMA I.API
  40. MXC DMA API initialized
  41. SCSI subsystem initialized
  42. CSPI: mxc_spi-0 probed
  43. usbcore: registered new interface driver usbfs
  44. usbcore: registered new interface driver hub
  45. usbcore: registered new device driver usb
  46. MXC I2C driver
  47. clk: Unable to get requested clock: dfm_clk
  48. ASoC version 0.20
  49. NET: Registered protocol family 2
  50. IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  51. TCP established hash table entries: 4096 (order: 3, 32768 bytes)
  52. TCP bind hash table entries: 4096 (order: 4, 114688 bytes)
  53. TCP: Hash tables configured (established 4096 bind 4096)
  54. TCP reno registered
  55. NET: Registered protocol family 1
  56. usb: DR host (utmi) registered
  57. krcupreemptd setsched 0
  58.   prio = 98
  59. Registering unionfs 2.5.1 (for 2.6.26.8)
  60. fuse init (API version 7.9)
  61. msgmni has been set to 245
  62. io scheduler noop registered
  63. io scheduler anticipatory registered
  64. io scheduler deadline registered
  65. io scheduler cfq registered (default)
  66. mxc_ipu mxc_ipu: Channel already uninitialized 14
  67. Console: switching to colour frame buffer device 60x34
  68. mxc_ipu mxc_ipu: Channel already uninitialized 15
  69. mxcfb: fb registered, using mode <NULL>
  70. fsl_rngc fsl_rngc: FSL RNGC Registered.
  71. Serial: MXC Internal UART driver
  72. mxcintuart.0: ttymxc0 at MMIO 0x43f90000 (irq = 45) is a Freescale MXC
  73. console [ttymxc0] enabled
  74. mxcintuart.1: ttymxc1 at MMIO 0x43f94000 (irq = 32) is a Freescale MXC
  75. loop: module loaded
  76. FEC ENET Version 0.2
  77. fec: PHY @ 0x1, ID 0x00008201 -- RTL8210CP
  78. eth0: ethernet 00:04:20:23:71:e7
  79. Driver 'sd' needs updating - please use bus_type methods
  80. MXC MTD nand Driver 2.5
  81. NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MiB 3,3V 8-bit)
  82. Bad block table found at page 65472, version 0x01
  83. Bad block table found at page 65408, version 0x01
  84. nand_read_bbt: Bad block at 0x013e0000
  85. nand_read_bbt: Bad block at 0x04920000
  86. nand_read_bbt: Bad block at 0x05c40000
  87. nand_read_bbt: Bad block at 0x07480000
  88. nand_read_bbt: Bad block at 0x07be0000
  89. RedBoot partition parsing not available
  90. cmdlinepart partition parsing not available
  91. Creating 2 MTD partitions on "NAND 128MiB 3,3V 8-bit":
  92. 0x00000000-0x00080000 : "redboot"
  93. 0x00080000-0x07f40000 : "ubi"
  94. UBI: attaching mtd1 to ubi0
  95. UBI: physical eraseblock size:   131072 bytes (128 KiB)
  96. UBI: logical eraseblock size:    129024 bytes
  97. UBI: smallest flash I/O unit:    2048
  98. UBI: sub-page size:              512
  99. UBI: VID header offset:          512 (aligned 512)
  100. UBI: data offset:                2048
  101. UBI: attached mtd1 to ubi0
  102. UBI: MTD device name:            "ubi"
  103. UBI: MTD device size:            126 MiB
  104. UBI: number of good PEBs:        1009
  105. UBI: number of bad PEBs:         5
  106. UBI: max. allowed volumes:       128
  107. UBI: wear-leveling threshold:    4096
  108. UBI: number of internal volumes: 1
  109. UBI: number of user volumes:     5
  110. UBI: available PEBs:             216
  111. UBI: total number of reserved PEBs: 793
  112. UBI: number of PEBs reserved for bad PEB handling: 10
  113. UBI: max/mean erase counter: 10/2
  114. UBI: background thread "ubi_bgt0d" started, PID 300
  115. fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
  116. fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1
  117. eth0: status: link up, 100MBit Full Duplex, auto-negotiation complete.
  118. fsl-ehci fsl-ehci.0: irq 37, io mem 0x53ff4000
  119. fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
  120. usb usb1: configuration #1 chosen from 1 choice
  121. hub 1-0:1.0: USB hub found
  122. hub 1-0:1.0: 1 port detected
  123. Initializing USB Mass Storage driver...
  124. usb 1-1: new high speed USB device using fsl-ehci and address 2
  125. usb 1-1: configuration #1 chosen from 1 choice
  126. usbcore: registered new interface driver usb-storage
  127. USB Mass Storage support registered.
  128. usbcore: registered new interface driver usbserial
  129. usbserial: USB Serial support registered for generic
  130. usbcore: registered new interface driver usbserial_generic
  131. usbserial: USB Serial Driver core
  132. usbserial: USB Serial support registered for FTDI USB Serial Device
  133. usbcore: registered new interface driver ftdi_sio
  134. ftdi_sio: v1.4.3:USB FTDI Serial Converters Driver
  135. usbserial: USB Serial support registered for Keyspan - (without firmware)
  136. usbserial: USB Serial support registered for Keyspan 1 port adapter
  137. usbserial: USB Serial support registered for Keyspan 2 port adapter
  138. usbserial: USB Serial support registered for Keyspan 4 port adapter
  139. usbcore: registered new interface driver keyspan
  140. keyspan: v1.1.5:Keyspan USB to Serial Converter Driver
  141. usbserial: USB Serial support registered for pl2303
  142. usbcore: registered new interface driver pl2303
  143. pl2303: Prolific PL2303 USB to serial adaptor driver
  144. mice: PS/2 mouse device common for all mice
  145. i2c /dev entries driver
  146. Clearpad: TM1199Logitech (7552,4248)
  147. input: Synaptics ClearPad as /class/input/input0
  148. tsl2569 0-0039: support ver. 1.0 enabled
  149. i2c-adapter i2c-0: ACK not received
  150. lm75: probe of 0-0048 failed with error -1
  151. MXC WatchDog Driver 2.0
  152. MXC Watchdog # 0 Timer: initial timeout 60 sec
  153. IPU Post-filter loading
  154. mxc_asrc registered
  155. input: FAB4 IR as /class/input/input1
  156. firmware: requesting ir_controller_21323.hex
  157. mxsdhci: MXC Secure Digital Host Controller Interface driver
  158. mxsdhci: MXC SDHCI Controller Driver.
  159. mmc0: SDHCI detect irq 0 irq 7 INTERNAL DMA
  160. mxsdhci: MXC SDHCI Controller Driver.
  161. mmc1: SDHCI detect irq 102 irq 8 INTERNAL DMA
  162. mmc0: new SDIO card at address 0001
  163. input: i-top SVB-202D as /class/input/input2
  164. input: USB HID v1.00 Device [i-top SVB-202D] on usb-fsl-ehci.0-1
  165. usbcore: registered new interface driver usbhid
  166. usbhid: v2.6:USB HID core driver
  167. Advanced Linux Sound Architecture Driver Version 1.0.16.
  168. MXC spdif support initialized
  169. uac_clock_source_is_valid(): cannot get clock validity for id 128
  170. uac_clock_source_is_valid(): cannot get clock validity for id 128
  171. uac_clock_source_is_valid(): cannot get clock validity for id 128
  172. usbcore: registered new interface driver snd-usb-audio
  173. AK4420 Audio Codec 0.1<6>DMA Sound Buffers Allocated:UseIram=0 buf->addr=87ec0000 buf->area=fe004000 size=65536
  174. asoc: ak4420-dai <-> imx-ssi-1 mapping ok
  175. WM8974 Audio Codec 0.1
  176. DMA Sound Buffers Allocated:UseIram=0 buf->addr=87ef0000 buf->area=fe014000 size=65536
  177. DMA Sound Buffers Allocated:UseIram=0 buf->addr=87f00000 buf->area=fe024000 size=65536
  178. asoc: wm8974-hifi-dai <-> imx-ssi-3 mapping ok
  179. fab4 WM8974 Audio Driver
  180. ALSA device list:
  181.   #0: MXC Freescale with SPDIF
  182.   #1: i-top SVB-202D at usb-fsl-ehci.0-1, high speed
  183.   #2: fab4 (ak4420)
  184.   #3: fab4 (wm8974)
  185. oprofile: using arm/armv6
  186. TCP cubic registered
  187. NET: Registered protocol family 17
  188. RPC: Registered udp transport module.
  189. RPC: Registered tcp transport module.
  190. ieee80211: 802.11 data/management/control stack, git-1.1.13
  191. ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
  192. ieee80211_crypt: registered algorithm 'NULL'
  193. mxc_rtc mxc_rtc.0: rtc core: registered mxc_rtc as rtc0
  194. No external RTC clock
  195. Real TIme clock Driver v1.0
  196. mxc_rtc: probe of mxc_rtc.0 failed with error -2
  197. Static Power Management for Freescale i.MX35
  198. VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 3
  199. MXC Backlight Device mxc_ipu_bl.0 Initialized.
  200. platform mxc_rtc.0: setting system clock to 1979-09-16 17:44:38 UTC (306351878)
  201. VFS: Mounted root (cramfs filesystem) readonly.
  202. Freeing init memory: 152K
  203. UBIFS: recovery needed
  204. UBIFS: recovery completed
  205. UBIFS: mounted UBI device 0, volume 2, name "ubifs"
  206. UBIFS: file system size:   19869696 bytes (19404 KiB, 18 MiB, 154 LEBs)
  207. UBIFS: journal size:       1032193 bytes (1008 KiB, 0 MiB, 8 LEBs)
  208. UBIFS: media format:       w4/r0 (latest is w4/r0)
  209. UBIFS: default compressor: lzo
  210. UBIFS: reserved for root:  938494 bytes (916 KiB)
  211. FAB4 IR: fw checksum ok aa33
  212. firmware: requesting helper_sd.bin
  213. firmware: requesting sd8686.bin
  214. eth0: config: auto-negotiation on, 100FDX, 100HDX, 10FDX, 10HDX.
  215. eth0: status: link down.
  216. eth0: status: link up, 100MBit Full Duplex, auto-negotiation complete.
  217. uac_clock_source_is_valid(): cannot get clock validity for id 128
  218. tsl2569: set timing: (1,2): 12
  219. Store Gain: 1
  220. Store Factor: 40
  221. CMD_RESP: cmd 0x801f error, result=0x1
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!