API tools faq
paste
Guest User

Configuration.h Repetier 0.92.2 for Rostock Max V2

a guest
Mar 10th, 2015
659
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
C++ 25.74 KB | None | 0 0
raw download clone embed print report
  1. /*
  2.     This file is part of Repetier-Firmware.
  3.  
  4.     Repetier-Firmware is free software: you can redistribute it and/or modify
  5.     it under the terms of the GNU General Public License as published by
  6.     the Free Software Foundation, either version 3 of the License, or
  7.     (at your option) any later version.
  8.  
  9.     Repetier-Firmware is distributed in the hope that it will be useful,
  10.     but WITHOUT ANY WARRANTY; without even the implied warranty of
  11.     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  12.     GNU General Public License for more details.
  13.  
  14.     You should have received a copy of the GNU General Public License
  15.     along with Repetier-Firmware.  If not, see <http://www.gnu.org/licenses/>.
  16.  
  17. */
  18.  
  19. #ifndef CONFIGURATION_H
  20. #define CONFIGURATION_H
  21.  
  22. /**************** READ FIRST ************************
  23.  
  24.    This configuration file was created with the configuration tool. For that
  25.    reason, it does not contain the same informations as the original Configuration.h file.
  26.    It misses the comments and unused parts. Open this file file in the config tool
  27.    to see and change the data. You can also upload it to newer/older versions. The system
  28.    will silently add new options, so compilation continues to work.
  29.  
  30.    This file is optimized for version 0.92
  31.    generator: http://www.repetier.com/firmware/v092/
  32.  
  33.    If you are in doubt which named functions use which pins on your board, please check the
  34.    pins.h for the used name->pin assignments and your board documentation to verify it is
  35.    as you expect.
  36.  
  37. */
  38.  
  39. #define NUM_EXTRUDER 1
  40. #define MOTHERBOARD 301
  41.  
  42. #include "pins.h"
  43.  
  44. // ################## EDIT THESE SETTINGS MANUALLY ################
  45. //  Microstepping mod eof your RAMO board
  46. #define MICROSTEP_MODES { 16,16,16,16,16 } // [1,2,4,8,16]
  47. // Motor Current setting (Only functional when motor driver current ref pins are connected to a digital trimpot on supported boards)
  48.     #define MOTOR_CURRENT { 175,175,175,175,0 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
  49.  
  50. // ################ END MANUAL SETTINGS ##########################
  51.  
  52. #define FAN_BOARD_PIN -1
  53.  
  54. //#define EXTERNALSERIAL  use Arduino serial library instead of build in. Requires more ram, has only 63 byte input buffer.
  55. // Uncomment the following line if you are using arduino compatible firmware made for Arduino version earlier then 1.0
  56. // If it is incompatible you will get compiler errors about write functions not beeing compatible!
  57. //#define COMPAT_PRE1
  58. #define MIXING_EXTRUDER 0
  59.  
  60. #define DRIVE_SYSTEM 3
  61. #define XAXIS_STEPS_PER_MM 80
  62. #define YAXIS_STEPS_PER_MM 80
  63. #define ZAXIS_STEPS_PER_MM 80
  64. #define EXTRUDER_FAN_COOL_TEMP 50
  65. #define PDM_FOR_EXTRUDER 0
  66. #define PDM_FOR_COOLER 1
  67. #define DECOUPLING_TEST_MAX_HOLD_VARIANCE 20
  68. #define DECOUPLING_TEST_MIN_TEMP_RISE 1
  69. #define KILL_IF_SENSOR_DEFECT 1
  70. #define RETRACT_ON_PAUSE 3
  71. #define PAUSE_START_COMMANDS ""
  72. #define PAUSE_END_COMMANDS ""
  73. #define EXT0_X_OFFSET 0
  74. #define EXT0_Y_OFFSET 0
  75. #define EXT0_STEPS_PER_MM 101.8
  76. #define EXT0_TEMPSENSOR_TYPE 97
  77. #define EXT0_TEMPSENSOR_PIN TEMP_0_PIN
  78. #define EXT0_HEATER_PIN HEATER_0_PIN
  79. #define EXT0_STEP_PIN ORIG_E0_STEP_PIN
  80. #define EXT0_DIR_PIN ORIG_E0_DIR_PIN
  81. #define EXT0_INVERSE 1
  82. #define EXT0_ENABLE_PIN E0_ENABLE_PIN
  83. #define EXT0_ENABLE_ON 0
  84. #define EXT0_MAX_FEEDRATE 100
  85. #define EXT0_MAX_START_FEEDRATE 45
  86. #define EXT0_MAX_ACCELERATION 6500
  87. #define EXT0_HEAT_MANAGER 3
  88. #define EXT0_WATCHPERIOD 3
  89. #define EXT0_PID_INTEGRAL_DRIVE_MAX 230
  90. #define EXT0_PID_INTEGRAL_DRIVE_MIN 40
  91. #define EXT0_PID_PGAIN_OR_DEAD_TIME 12.44
  92. #define EXT0_PID_I 2.18
  93. #define EXT0_PID_D 112.9
  94. #define EXT0_PID_MAX 255
  95. #define EXT0_ADVANCE_K 0
  96. #define EXT0_ADVANCE_L 0
  97. #define EXT0_ADVANCE_BACKLASH_STEPS 0
  98. #define EXT0_WAIT_RETRACT_TEMP 150
  99. #define EXT0_WAIT_RETRACT_UNITS 0
  100. #define EXT0_SELECT_COMMANDS ""
  101. #define EXT0_DESELECT_COMMANDS ""
  102. #define EXT0_EXTRUDER_COOLER_PIN 7
  103. #define EXT0_EXTRUDER_COOLER_SPEED 128
  104. #define EXT0_DECOUPLE_TEST_PERIOD 120000
  105.  
  106. #define FEATURE_RETRACTION 1
  107. #define AUTORETRACT_ENABLED 0
  108. #define RETRACTION_LENGTH 3
  109. #define RETRACTION_LONG_LENGTH 13
  110. #define RETRACTION_SPEED 40
  111. #define RETRACTION_Z_LIFT 0
  112. #define RETRACTION_UNDO_EXTRA_LENGTH 0
  113. #define RETRACTION_UNDO_EXTRA_LONG_LENGTH 0
  114. #define RETRACTION_UNDO_SPEED 20
  115. #define FILAMENTCHANGE_X_POS 0
  116. #define FILAMENTCHANGE_Y_POS 0
  117. #define FILAMENTCHANGE_Z_ADD  2
  118. #define FILAMENTCHANGE_REHOME 1
  119. #define FILAMENTCHANGE_SHORTRETRACT 5
  120. #define FILAMENTCHANGE_LONGRETRACT 50
  121.  
  122. #define RETRACT_DURING_HEATUP true
  123. #define PID_CONTROL_RANGE 20
  124. #define SKIP_M109_IF_WITHIN 2
  125. #define SCALE_PID_TO_MAX 0
  126. #define TEMP_HYSTERESIS 0
  127. #define EXTRUDE_MAXLENGTH 100
  128. #define NUM_TEMPS_USERTHERMISTOR0 28
  129. #define USER_THERMISTORTABLE0  {\
  130.   {1*4,864*8},{21*4,300*8},{25*4,290*8},{29*4,280*8},{33*4,270*8},{39*4,260*8},{46*4,250*8},{54*4,240*8},{64*4,230*8},{75*4,220*8},\
  131.   {90*4,210*8},{107*4,200*8},{128*4,190*8},{154*4,180*8},{184*4,170*8},{221*4,160*8},{265*4,150*8},{316*4,140*8},{375*4,130*8},\
  132.   {441*4,120*8},{513*4,110*8},{588*4,100*8},{734*4,80*8},{856*4,60*8},{938*4,40*8},{986*4,20*8},{1008*4,0*8},{1018*4,-20*8}     }
  133. #define NUM_TEMPS_USERTHERMISTOR1 0
  134. #define USER_THERMISTORTABLE1 {}
  135. #define NUM_TEMPS_USERTHERMISTOR2 0
  136. #define USER_THERMISTORTABLE2 {}
  137. #define USE_GENERIC_THERMISTORTABLE_1
  138. #define GENERIC_THERM1_T0 25
  139. #define GENERIC_THERM1_R0 100000
  140. #define GENERIC_THERM1_BETA 4450
  141. #define GENERIC_THERM1_MIN_TEMP -20
  142. #define GENERIC_THERM1_MAX_TEMP 300
  143. #define GENERIC_THERM1_R1 0
  144. #define GENERIC_THERM1_R2 4700
  145. #define USE_GENERIC_THERMISTORTABLE_2
  146. #define GENERIC_THERM2_T0 25
  147. #define GENERIC_THERM2_R0 100000
  148. #define GENERIC_THERM2_BETA 4367
  149. #define GENERIC_THERM2_MIN_TEMP -20
  150. #define GENERIC_THERM2_MAX_TEMP 300
  151. #define GENERIC_THERM2_R1 0
  152. #define GENERIC_THERM2_R2 4700
  153. #define GENERIC_THERM_VREF 5
  154. #define GENERIC_THERM_NUM_ENTRIES 33
  155. #define HEATER_PWM_SPEED 2
  156.  
  157. // ############# Heated bed configuration ########################
  158.  
  159. #define HAVE_HEATED_BED 1
  160. #define HEATED_BED_MAX_TEMP 120
  161. #define SKIP_M190_IF_WITHIN 3
  162. #define HEATED_BED_SENSOR_TYPE 98
  163. #define HEATED_BED_SENSOR_PIN TEMP_1_PIN
  164. #define HEATED_BED_HEATER_PIN HEATER_1_PIN
  165. #define HEATED_BED_SET_INTERVAL 5000
  166. #define HEATED_BED_HEAT_MANAGER 1
  167. #define HEATED_BED_PID_INTEGRAL_DRIVE_MAX 255
  168. #define HEATED_BED_PID_INTEGRAL_DRIVE_MIN 80
  169. #define HEATED_BED_PID_PGAIN_OR_DEAD_TIME   30.79
  170. #define HEATED_BED_PID_IGAIN   0.48
  171. #define HEATED_BED_PID_DGAIN 486.8
  172. #define HEATED_BED_PID_MAX 255
  173. #define HEATED_BED_DECOUPLE_TEST_PERIOD 300000
  174. #define MIN_EXTRUDER_TEMP 150
  175. #define MAXTEMP 247
  176. #define MIN_DEFECT_TEMPERATURE 0
  177. #define MAX_DEFECT_TEMPERATURE 290
  178.  
  179. // ################ Endstop configuration #####################
  180.  
  181. #define ENDSTOP_PULLUP_X_MIN true
  182. #define ENDSTOP_X_MIN_INVERTING true
  183. #define MIN_HARDWARE_ENDSTOP_X false
  184. #define ENDSTOP_PULLUP_Y_MIN true
  185. #define ENDSTOP_Y_MIN_INVERTING true
  186. #define MIN_HARDWARE_ENDSTOP_Y true
  187. #define ENDSTOP_PULLUP_Z_MIN true
  188. #define ENDSTOP_Z_MIN_INVERTING true
  189. #define MIN_HARDWARE_ENDSTOP_Z false
  190. #define ENDSTOP_PULLUP_X_MAX true
  191. #define ENDSTOP_X_MAX_INVERTING false
  192. #define MAX_HARDWARE_ENDSTOP_X true
  193. #define ENDSTOP_PULLUP_Y_MAX true
  194. #define ENDSTOP_Y_MAX_INVERTING false
  195. #define MAX_HARDWARE_ENDSTOP_Y true
  196. #define ENDSTOP_PULLUP_Z_MAX true
  197. #define ENDSTOP_Z_MAX_INVERTING false
  198. #define MAX_HARDWARE_ENDSTOP_Z true
  199. #define max_software_endstop_r true
  200.  
  201. #define min_software_endstop_x false
  202. #define min_software_endstop_y false
  203. #define min_software_endstop_z false
  204. #define max_software_endstop_x true
  205. #define max_software_endstop_y true
  206. #define max_software_endstop_z true
  207. #define ENDSTOP_X_BACK_MOVE 10
  208. #define ENDSTOP_Y_BACK_MOVE 10
  209. #define ENDSTOP_Z_BACK_MOVE 10
  210. #define ENDSTOP_X_RETEST_REDUCTION_FACTOR 4
  211. #define ENDSTOP_Y_RETEST_REDUCTION_FACTOR 4
  212. #define ENDSTOP_Z_RETEST_REDUCTION_FACTOR 4
  213. #define ENDSTOP_X_BACK_ON_HOME 5
  214. #define ENDSTOP_Y_BACK_ON_HOME 5
  215. #define ENDSTOP_Z_BACK_ON_HOME 5
  216. #define ALWAYS_CHECK_ENDSTOPS 1
  217.  
  218. // ################# XYZ movements ###################
  219.  
  220. #define X_ENABLE_ON 0
  221. #define Y_ENABLE_ON 0
  222. #define Z_ENABLE_ON 0
  223. #define DISABLE_X 0
  224. #define DISABLE_Y 0
  225. #define DISABLE_Z 0
  226. #define DISABLE_E 0
  227. #define INVERT_X_DIR 1
  228. #define INVERT_Y_DIR 0
  229. #define INVERT_Z_DIR 1
  230. #define X_HOME_DIR 1
  231. #define Y_HOME_DIR 1
  232. #define Z_HOME_DIR 1
  233. #define X_MAX_LENGTH 396
  234. #define Y_MAX_LENGTH 396
  235. #define Z_MAX_LENGTH 396
  236. #define X_MIN_POS 0
  237. #define Y_MIN_POS 0
  238. #define Z_MIN_POS 0
  239. #define DISTORTION_CORRECTION 0
  240. #define DISTORTION_CORRECTION_POINTS 10
  241. #define DISTORTION_CORRECTION_R 120
  242. #define DISTORTION_PERMANENT 1
  243. #define DISTORTION_UPDATE_FREQUENCY 15
  244. #define DISTORTION_START_DEGRADE 0.5
  245. #define DISTORTION_END_HEIGHT 1
  246. #define DISTORTION_EXTRAPOLATE_CORNERS 0
  247.  
  248. // ##########################################################################################
  249. // ##                           Movement settings                                          ##
  250. // ##########################################################################################
  251.  
  252. #define FEATURE_BABYSTEPPING 1
  253. #define BABYSTEP_MULTIPLICATOR 1
  254.  
  255. #define DELTA_SEGMENTS_PER_SECOND_PRINT 225 // Move accurate setting for print moves
  256. #define DELTA_SEGMENTS_PER_SECOND_MOVE 80 // Less accurate setting for other moves
  257.  
  258. // Delta settings
  259. #define DELTA_DIAGONAL_ROD 268.5 // mm
  260. #define DELTA_ALPHA_A 210
  261. #define DELTA_ALPHA_B 330
  262. #define DELTA_ALPHA_C 90
  263. #define DELTA_RADIUS_CORRECTION_A 0
  264. #define DELTA_RADIUS_CORRECTION_B 0
  265. #define DELTA_RADIUS_CORRECTION_C 0
  266. #define DELTA_DIAGONAL_CORRECTION_A 0
  267. #define DELTA_DIAGONAL_CORRECTION_B 0
  268. #define DELTA_DIAGONAL_CORRECTION_C 0
  269. #define END_EFFECTOR_HORIZONTAL_OFFSET 0
  270. #define CARRIAGE_HORIZONTAL_OFFSET 0
  271. #define DELTA_MAX_RADIUS 150
  272. #define ROD_RADIUS 129.725
  273. #define PRINTER_RADIUS 129.725
  274. #define DELTA_HOME_ON_POWER 0
  275. #define STEP_COUNTER
  276. #define DELTA_X_ENDSTOP_OFFSET_STEPS 0
  277. #define DELTA_Y_ENDSTOP_OFFSET_STEPS 0
  278. #define DELTA_Z_ENDSTOP_OFFSET_STEPS 0
  279. #define DELTA_FLOOR_SAFETY_MARGIN_MM 15
  280. //#define SOFTWARE_LEVELING
  281.  
  282. #define DELTASEGMENTS_PER_PRINTLINE 24
  283. #define STEPPER_INACTIVE_TIME 0L
  284. #define MAX_INACTIVE_TIME 1800L
  285. #define MAX_FEEDRATE_X 300
  286. #define MAX_FEEDRATE_Y 300
  287. #define MAX_FEEDRATE_Z 300
  288. #define HOMING_FEEDRATE_X 120
  289. #define HOMING_FEEDRATE_Y 120
  290. #define HOMING_FEEDRATE_Z 120
  291. #define HOMING_ORDER HOME_ORDER_ZXY
  292. #define ENABLE_BACKLASH_COMPENSATION 0
  293. #define X_BACKLASH 0
  294. #define Y_BACKLASH 0
  295. #define Z_BACKLASH 0
  296. #define RAMP_ACCELERATION 1
  297. #define STEPPER_HIGH_DELAY 0
  298. #define DIRECTION_DELAY 0
  299. #define STEP_DOUBLER_FREQUENCY 12000
  300. #define ALLOW_QUADSTEPPING 1
  301. #define DOUBLE_STEP_DELAY 1 // time in microseconds
  302. #define MAX_HALFSTEP_INTERVAL 1999
  303. #define MAX_ACCELERATION_UNITS_PER_SQ_SECOND_X 1850
  304. #define MAX_ACCELERATION_UNITS_PER_SQ_SECOND_Y 1850
  305. #define MAX_ACCELERATION_UNITS_PER_SQ_SECOND_Z 1850
  306. #define MAX_TRAVEL_ACCELERATION_UNITS_PER_SQ_SECOND_X 3000
  307. #define MAX_TRAVEL_ACCELERATION_UNITS_PER_SQ_SECOND_Y 3000
  308. #define MAX_TRAVEL_ACCELERATION_UNITS_PER_SQ_SECOND_Z 3000
  309. #define MAX_JERK 35
  310. #define MAX_ZJERK 0.3
  311. #define PRINTLINE_CACHE_SIZE 16
  312. #define MOVE_CACHE_LOW 10
  313. #define LOW_TICKS_PER_MOVE 250000
  314. #define FEATURE_TWO_XSTEPPER 0
  315. #define X2_STEP_PIN   ORIG_E1_STEP_PIN
  316. #define X2_DIR_PIN    ORIG_E1_DIR_PIN
  317. #define X2_ENABLE_PIN E1_ENABLE_PIN
  318. #define FEATURE_TWO_YSTEPPER 0
  319. #define Y2_STEP_PIN   ORIG_E1_STEP_PIN
  320. #define Y2_DIR_PIN    ORIG_E1_DIR_PIN
  321. #define Y2_ENABLE_PIN E1_ENABLE_PIN
  322. #define FEATURE_TWO_ZSTEPPER 0
  323. #define Z2_STEP_PIN   ORIG_E1_STEP_PIN
  324. #define Z2_DIR_PIN    ORIG_E1_DIR_PIN
  325. #define Z2_ENABLE_PIN E1_ENABLE_PIN
  326. #define FEATURE_DITTO_PRINTING 0
  327. #define USE_ADVANCE 0
  328. #define ENABLE_QUADRATIC_ADVANCE 0
  329.  
  330.  
  331. // ################# Misc. settings ##################
  332.  
  333. #define BAUDRATE 250000
  334. #define ENABLE_POWER_ON_STARTUP 1
  335. #define POWER_INVERTING 0
  336. #define KILL_METHOD 1
  337. #define ACK_WITH_LINENUMBER 1
  338. #define WAITING_IDENTIFIER "wait"
  339. #define ECHO_ON_EXECUTE 1
  340. #define EEPROM_MODE 2
  341. #define PS_ON_PIN ORIG_PS_ON_PIN
  342.  
  343. /* ======== Servos =======
  344. Control the servos with
  345. M340 P<servoId> S<pulseInUS>   / ServoID = 0..3  pulseInUs = 500..2500
  346. Servos are controlled by a pulse width normally between 500 and 2500 with 1500ms in center position. 0 turns servo off.
  347. WARNING: Servos can draw a considerable amount of current. Make sure your system can handle this or you may risk your hardware!
  348. */
  349. #define FEATURE_SERVO 0
  350. #define SERVO0_PIN 11
  351. #define SERVO1_PIN -1
  352. #define SERVO2_PIN -1
  353. #define SERVO3_PIN -1
  354. #define SERVO0_NEUTRAL_POS  -1
  355. #define SERVO1_NEUTRAL_POS  -1
  356. #define SERVO2_NEUTRAL_POS  -1
  357. #define SERVO3_NEUTRAL_POS  -1
  358. #define UI_SERVO_CONTROL 0
  359. #define FAN_KICKSTART_TIME  200
  360.  
  361.         #define FEATURE_WATCHDOG 1
  362.  
  363. // #################### Z-Probing #####################
  364.  
  365. #define FEATURE_Z_PROBE 0
  366. #define Z_PROBE_BED_DISTANCE 10
  367. #define Z_PROBE_PIN -1
  368. #define Z_PROBE_PULLUP 0
  369. #define Z_PROBE_ON_HIGH 0
  370. #define Z_PROBE_X_OFFSET 0
  371. #define Z_PROBE_Y_OFFSET 0
  372. #define Z_PROBE_WAIT_BEFORE_TEST 0
  373. #define Z_PROBE_SPEED 2
  374. #define Z_PROBE_XY_SPEED 150
  375. #define Z_PROBE_SWITCHING_DISTANCE 1
  376. #define Z_PROBE_REPETITIONS 1
  377. #define Z_PROBE_HEIGHT 40
  378. #define Z_PROBE_START_SCRIPT ""
  379. #define Z_PROBE_FINISHED_SCRIPT ""
  380. #define FEATURE_AUTOLEVEL 1
  381. #define Z_PROBE_X1 20
  382. #define Z_PROBE_Y1 20
  383. #define Z_PROBE_X2 160
  384. #define Z_PROBE_Y2 20
  385. #define Z_PROBE_X3 100
  386. #define Z_PROBE_Y3 160
  387. #define FEATURE_AXISCOMP 1
  388. #define AXISCOMP_TANXY 0
  389. #define AXISCOMP_TANYZ 0
  390. #define AXISCOMP_TANXZ 0
  391.  
  392. #ifndef SDSUPPORT  // Some boards have sd support on board. These define the values already in pins.h
  393. #define SDSUPPORT 1
  394. #define SDCARDDETECT 81
  395. #define SDCARDDETECTINVERTED 0
  396. #endif
  397. #define SD_EXTENDED_DIR 1 /** Show extended directory including file length. Don't use this with Pronterface! */
  398. #define SD_RUN_ON_STOP ""
  399. #define SD_STOP_HEATER_AND_MOTORS_ON_STOP 1
  400. #define ARC_SUPPORT 1
  401. #define FEATURE_MEMORY_POSITION 1
  402. #define FEATURE_CHECKSUM_FORCED 0
  403. #define FEATURE_FAN_CONTROL 1
  404. #define FEATURE_CONTROLLER 13
  405. #define UI_LANGUAGE 0
  406. #define UI_PRINTER_NAME "Rostock Max V2"
  407. #define UI_PRINTER_COMPANY "SeeMeCNC"
  408. #define UI_PAGES_DURATION 4000
  409. #define UI_ANIMATION 0
  410. #define UI_SPEEDDEPENDENT_POSITIONING 1
  411. #define UI_DISABLE_AUTO_PAGESWITCH 1
  412. #define UI_AUTORETURN_TO_MENU_AFTER 60000
  413. #define FEATURE_UI_KEYS 0
  414. #define UI_ENCODER_SPEED 1
  415. #define UI_REVERSE_ENCODER 1
  416. #define UI_KEY_BOUNCETIME 10
  417. #define UI_KEY_FIRST_REPEAT 500
  418. #define UI_KEY_REDUCE_REPEAT 50
  419. #define UI_KEY_MIN_REPEAT 50
  420. #define FEATURE_BEEPER 1
  421. #define CASE_LIGHTS_PIN -1
  422. #define CASE_LIGHT_DEFAULT_ON 1
  423. #define UI_START_SCREEN_DELAY 1000
  424. #define UI_DYNAMIC_ENCODER_SPEED 1
  425.         /**
  426. Beeper sound definitions for short beeps during key actions
  427. and longer beeps for important actions.
  428. Parameter is delay in microseconds and the secons is the number of repetitions.
  429. Values must be in range 1..255
  430. */
  431. #define BEEPER_SHORT_SEQUENCE 2,2
  432. #define BEEPER_LONG_SEQUENCE 8,8
  433. #define UI_SET_PRESET_HEATED_BED_TEMP_PLA 60
  434. #define UI_SET_PRESET_EXTRUDER_TEMP_PLA   180
  435. #define UI_SET_PRESET_HEATED_BED_TEMP_ABS 65
  436. #define UI_SET_PRESET_EXTRUDER_TEMP_ABS   232
  437. #define UI_SET_MIN_HEATED_BED_TEMP  30
  438. #define UI_SET_MAX_HEATED_BED_TEMP 120
  439. #define UI_SET_MIN_EXTRUDER_TEMP   150
  440. #define UI_SET_MAX_EXTRUDER_TEMP   240
  441. #define UI_SET_EXTRUDER_FEEDRATE 2
  442. #define UI_SET_EXTRUDER_RETRACT_DISTANCE 3
  443.  
  444. #endif
  445.  
  446. /* Below you will find the configuration string, that created this Configuration.h
  447.  
  448. ========== Start configuration string ==========
  449. {
  450.     "editMode": 2,
  451.     "processor": 0,
  452.     "baudrate": 250000,
  453.     "xStepsPerMM": 80,
  454.     "yStepsPerMM": 80,
  455.     "zStepsPerMM": 80,
  456.     "xInvert": "1",
  457.     "xInvertEnable": 0,
  458.     "eepromMode": 2,
  459.     "yInvert": 0,
  460.     "yInvertEnable": 0,
  461.     "zInvert": "1",
  462.     "zInvertEnable": 0,
  463.     "extruder": [
  464.         {
  465.             "id": 0,
  466.             "heatManager": 3,
  467.             "pidDriveMin": 40,
  468.             "pidDriveMax": 230,
  469.             "pidMax": 255,
  470.             "sensorType": 97,
  471.             "sensorPin": "TEMP_0_PIN",
  472.             "heaterPin": "HEATER_0_PIN",
  473.             "maxFeedrate": 100,
  474.             "startFeedrate": 45,
  475.             "invert": "1",
  476.             "invertEnable": "0",
  477.             "acceleration": 6500,
  478.             "watchPeriod": 3,
  479.             "pidP": 12.44,
  480.             "pidI": 2.18,
  481.             "pidD": 112.9,
  482.             "advanceK": 0,
  483.             "advanceL": 0,
  484.             "waitRetractTemp": 150,
  485.             "waitRetractUnits": 0,
  486.             "waitRetract": 0,
  487.             "stepsPerMM": 101.8,
  488.             "coolerPin": 7,
  489.             "coolerSpeed": 128,
  490.             "selectCommands": "",
  491.             "deselectCommands": "",
  492.             "xOffset": 0,
  493.             "yOffset": 0,
  494.             "xOffsetSteps": 0,
  495.             "yOffsetSteps": 0,
  496.             "stepper": {
  497.                 "name": "Extruder 0",
  498.                 "step": "ORIG_E0_STEP_PIN",
  499.                 "dir": "ORIG_E0_DIR_PIN",
  500.                 "enable": "E0_ENABLE_PIN"
  501.             },
  502.             "advanceBacklashSteps": 0,
  503.             "decoupleTestPeriod": 120
  504.         }
  505.     ],
  506.     "uiLanguage": 0,
  507.     "uiController": 0,
  508.     "xMinEndstop": 1,
  509.     "yMinEndstop": 1,
  510.     "zMinEndstop": 1,
  511.     "xMaxEndstop": 0,
  512.     "yMaxEndstop": 0,
  513.     "zMaxEndstop": 0,
  514.     "motherboard": 301,
  515.     "driveSystem": 3,
  516.     "xMaxSpeed": 300,
  517.     "xHomingSpeed": 120,
  518.     "xTravelAcceleration": 3000,
  519.     "xPrintAcceleration": 1850,
  520.     "yMaxSpeed": 300,
  521.     "yHomingSpeed": 120,
  522.     "yTravelAcceleration": 3000,
  523.     "yPrintAcceleration": 1850,
  524.     "zMaxSpeed": 300,
  525.     "zHomingSpeed": 120,
  526.     "zTravelAcceleration": 3000,
  527.     "zPrintAcceleration": 1850,
  528.     "xMotor": {
  529.         "name": "X motor",
  530.         "step": "ORIG_X_STEP_PIN",
  531.         "dir": "ORIG_X_DIR_PIN",
  532.         "enable": "ORIG_X_ENABLE_PIN"
  533.     },
  534.     "yMotor": {
  535.         "name": "Y motor",
  536.         "step": "ORIG_Y_STEP_PIN",
  537.         "dir": "ORIG_Y_DIR_PIN",
  538.         "enable": "ORIG_Y_ENABLE_PIN"
  539.     },
  540.     "zMotor": {
  541.         "name": "Z motor",
  542.         "step": "ORIG_Z_STEP_PIN",
  543.         "dir": "ORIG_Z_DIR_PIN",
  544.         "enable": "ORIG_Z_ENABLE_PIN"
  545.     },
  546.     "enableBacklash": "0",
  547.     "backlashX": 0,
  548.     "backlashY": 0,
  549.     "backlashZ": 0,
  550.     "stepperInactiveTime": 0,
  551.     "maxInactiveTime": 1800,
  552.     "xMinPos": 0,
  553.     "yMinPos": 0,
  554.     "zMinPos": 0,
  555.     "xLength": 396,
  556.     "yLength": 396,
  557.     "zLength": 396,
  558.     "alwaysCheckEndstops": "1",
  559.     "disableX": "0",
  560.     "disableY": "0",
  561.     "disableZ": "0",
  562.     "disableE": "0",
  563.     "xHomeDir": 1,
  564.     "yHomeDir": 1,
  565.     "zHomeDir": 1,
  566.     "xEndstopBack": 5,
  567.     "yEndstopBack": 5,
  568.     "zEndstopBack": 5,
  569.     "deltaSegmentsPerSecondPrint": 225,
  570.     "deltaSegmentsPerSecondTravel": 80,
  571.     "deltaDiagonalRod": 268.5,
  572.     "deltaHorizontalRadius": 129.725,
  573.     "deltaAlphaA": 210,
  574.     "deltaAlphaB": 330,
  575.     "deltaAlphaC": 90,
  576.     "deltaDiagonalCorrA": 0,
  577.     "deltaDiagonalCorrB": 0,
  578.     "deltaDiagonalCorrC": 0,
  579.     "deltaMaxRadius": 150,
  580.     "deltaFloorSafetyMarginMM": 15,
  581.     "deltaRadiusCorrA": 0,
  582.     "deltaRadiusCorrB": 0,
  583.     "deltaRadiusCorrC": 0,
  584.     "deltaXOffsetSteps": 0,
  585.     "deltaYOffsetSteps": 0,
  586.     "deltaZOffsetSteps": 0,
  587.     "deltaSegmentsPerLine": 24,
  588.     "stepperHighDelay": 0,
  589.     "directionDelay": 0,
  590.     "stepDoublerFrequency": 12000,
  591.     "allowQuadstepping": "1",
  592.     "doubleStepDelay": 1,
  593.     "maxHalfstepInterval": 1999,
  594.     "maxJerk": 35,
  595.     "maxZJerk": 0.3,
  596.     "moveCacheSize": 16,
  597.     "moveCacheLow": 10,
  598.     "lowTicksPerMove": 250000,
  599.     "enablePowerOnStartup": "1",
  600.     "echoOnExecute": "1",
  601.     "sendWaits": "1",
  602.     "ackWithLineNumber": "1",
  603.     "killMethod": 1,
  604.     "useAdvance": "0",
  605.     "useQuadraticAdvance": "0",
  606.     "powerInverting": 0,
  607.     "mirrorX": 0,
  608.     "mirrorXMotor": {
  609.         "name": "Extruder 1",
  610.         "step": "ORIG_E1_STEP_PIN",
  611.         "dir": "ORIG_E1_DIR_PIN",
  612.         "enable": "E1_ENABLE_PIN"
  613.     },
  614.     "mirrorY": 0,
  615.     "mirrorYMotor": {
  616.         "name": "Extruder 1",
  617.         "step": "ORIG_E1_STEP_PIN",
  618.         "dir": "ORIG_E1_DIR_PIN",
  619.         "enable": "E1_ENABLE_PIN"
  620.     },
  621.     "mirrorZ": 0,
  622.     "mirrorZMotor": {
  623.         "name": "Extruder 1",
  624.         "step": "ORIG_E1_STEP_PIN",
  625.         "dir": "ORIG_E1_DIR_PIN",
  626.         "enable": "E1_ENABLE_PIN"
  627.     },
  628.     "dittoPrinting": "0",
  629.     "featureServos": "0",
  630.     "servo0Pin": 11,
  631.     "servo1Pin": -1,
  632.     "servo2Pin": -1,
  633.     "servo3Pin": -1,
  634.     "featureWatchdog": "1",
  635.     "hasHeatedBed": "1",
  636.     "enableZProbing": "1",
  637.     "extrudeMaxLength": 100,
  638.     "homeOrder": "HOME_ORDER_ZXY",
  639.     "featureController": 13,
  640.     "uiPrinterName": "Rostock Max V2",
  641.     "uiPrinterCompany": "SeeMeCNC",
  642.     "uiPagesDuration": 4000,
  643.     "uiAnimation": "0",
  644.     "uiDisablePageswitch": "1",
  645.     "uiAutoReturnAfter": 60000,
  646.     "featureKeys": "0",
  647.     "uiEncoderSpeed": 1,
  648.     "uiReverseEncoder": "1",
  649.     "uiKeyBouncetime": 10,
  650.     "uiKeyFirstRepeat": 500,
  651.     "uiKeyReduceRepeat": 50,
  652.     "uiKeyMinRepeat": 50,
  653.     "featureBeeper": "1",
  654.     "uiPresetBedTempPLA": 60,
  655.     "uiPresetBedABS": 65,
  656.     "uiPresetExtruderPLA": 180,
  657.     "uiPresetExtruderABS": 232,
  658.     "uiMinHeatedBed": 30,
  659.     "uiMaxHeatedBed": 120,
  660.     "uiMinEtxruderTemp": 150,
  661.     "uiMaxExtruderTemp": 240,
  662.     "uiExtruderFeedrate": 2,
  663.     "uiExtruderRetractDistance": 3,
  664.     "uiSpeeddependentPositioning": "1",
  665.     "maxBedTemperature": 120,
  666.     "bedSensorType": 98,
  667.     "bedSensorPin": "TEMP_1_PIN",
  668.     "bedHeaterPin": "HEATER_1_PIN",
  669.     "bedHeatManager": 1,
  670.     "bedUpdateInterval": 5000,
  671.     "bedPidDriveMin": 80,
  672.     "bedPidDriveMax": 255,
  673.     "bedPidP": 30.79,
  674.     "bedPidI": 0.48,
  675.     "bedPidD": 486.8,
  676.     "bedPidMax": 255,
  677.     "bedDecoupleTestPeriod": 300,
  678.     "caseLightPin": -1,
  679.     "caseLightDefaultOn": "1",
  680.     "bedSkipIfWithin": 3,
  681.     "gen1T0": 25,
  682.     "gen1R0": 100000,
  683.     "gen1Beta": 4450,
  684.     "gen1MinTemp": -20,
  685.     "gen1MaxTemp": 300,
  686.     "gen1R1": 0,
  687.     "gen1R2": 4700,
  688.     "gen2T0": 25,
  689.     "gen2R0": 100000,
  690.     "gen2Beta": 4367,
  691.     "gen2MinTemp": -20,
  692.     "gen2MaxTemp": 300,
  693.     "gen2R1": 0,
  694.     "gen2R2": 4700,
  695.     "gen3T0": 25,
  696.     "gen3R0": 100000,
  697.     "gen3Beta": 4036,
  698.     "gen3MinTemp": -20,
  699.     "gen3MaxTemp": 300,
  700.     "gen3R1": 0,
  701.     "gen3R2": 4700,
  702.     "userTable0": {
  703.         "r1": 0,
  704.         "r2": 4700,
  705.         "temps": [
  706.  
  707.         ]
  708.     },
  709.     "userTable1": {
  710.         "r1": 0,
  711.         "r2": 4700,
  712.         "temps": [
  713.  
  714.         ]
  715.     },
  716.     "userTable2": {
  717.         "r1": 0,
  718.         "r2": 4700,
  719.         "temps": [
  720.  
  721.         ]
  722.     },
  723.     "tempHysteresis": 0,
  724.     "pidControlRange": 20,
  725.     "skipM109Within": 2,
  726.     "extruderFanCoolTemp": 50,
  727.     "minTemp": 150,
  728.     "maxTemp": 247,
  729.     "minDefectTemp": 0,
  730.     "maxDefectTemp": 290,
  731.     "arcSupport": "1",
  732.     "featureMemoryPositionWatchdog": "1",
  733.     "forceChecksum": "0",
  734.     "sdExtendedDir": "1",
  735.     "featureFanControl": "1",
  736.     "fanPin": "ORIG_FAN_PIN",
  737.     "scalePidToMax": 0,
  738.     "zProbePin": -1,
  739.     "zProbeBedDistance": 10,
  740.     "zProbePullup": "0",
  741.     "zProbeOnHigh": "0",
  742.     "zProbeXOffset": 0,
  743.     "zProbeYOffset": 0,
  744.     "zProbeWaitBeforeTest": "0",
  745.     "zProbeSpeed": 2,
  746.     "zProbeXYSpeed": 150,
  747.     "zProbeHeight": 40,
  748.     "zProbeStartScript": "",
  749.     "zProbeFinishedScript": "",
  750.     "featureAutolevel": "1",
  751.     "zProbeX1": 20,
  752.     "zProbeY1": 20,
  753.     "zProbeX2": 160,
  754.     "zProbeY2": 20,
  755.     "zProbeX3": 100,
  756.     "zProbeY3": 160,
  757.     "zProbeSwitchingDistance": 1,
  758.     "zProbeRepetitions": 1,
  759.     "sdSupport": "1",
  760.     "sdCardDetectPin": 81,
  761.     "sdCardDetectInverted": "0",
  762.     "uiStartScreenDelay": 1000,
  763.     "xEndstopBackMove": 10,
  764.     "yEndstopBackMove": 10,
  765.     "zEndstopBackMove": 10,
  766.     "xEndstopRetestFactor": 4,
  767.     "yEndstopRetestFactor": 4,
  768.     "zEndstopRetestFactor": 4,
  769.     "xMinPin": "ORIG_X_MIN_PIN",
  770.     "yMinPin": "ORIG_Y_MIN_PIN",
  771.     "zMinPin": "ORIG_Z_MIN_PIN",
  772.     "xMaxPin": "ORIG_X_MAX_PIN",
  773.     "yMaxPin": "ORIG_Y_MAX_PIN",
  774.     "zMaxPin": "ORIG_Z_MAX_PIN",
  775.     "deltaHomeOnPower": "0",
  776.     "fanBoardPin": -1,
  777.     "heaterPWMSpeed": 2,
  778.     "featureBabystepping": "1",
  779.     "babystepMultiplicator": 1,
  780.     "pdmForHeater": "0",
  781.     "pdmForCooler": "1",
  782.     "psOn": "ORIG_PS_ON_PIN",
  783.     "mixingExtruder": "0",
  784.     "decouplingTestMaxHoldVariance": 20,
  785.     "decouplingTestMinTempRise": 1,
  786.     "featureAxisComp": "1",
  787.     "axisCompTanXY": 0,
  788.     "axisCompTanXZ": 0,
  789.     "axisCompTanYZ": 0,
  790.     "retractOnPause": 3,
  791.     "pauseStartCommands": "",
  792.     "pauseEndCommands": "",
  793.     "distortionCorrection": "0",
  794.     "distortionCorrectionPoints": 10,
  795.     "distortionCorrectionR": 120,
  796.     "distortionPermanent": "1",
  797.     "distortionUpdateFrequency": 15,
  798.     "distortionStartDegrade": 0.5,
  799.     "distortionEndDegrade": 1,
  800.     "distortionExtrapolateCorners": "0",
  801.     "sdRunOnStop": "",
  802.     "sdStopHeaterMotorsOnStop": "1",
  803.     "featureRetraction": "1",
  804.     "autoretractEnabled": "0",
  805.     "retractionLength": 3,
  806.     "retractionLongLength": 13,
  807.     "retractionSpeed": 40,
  808.     "retractionZLift": 0,
  809.     "retractionUndoExtraLength": 0,
  810.     "retractionUndoExtraLongLength": 0,
  811.     "retractionUndoSpeed": 20,
  812.     "filamentChangeXPos": 0,
  813.     "filamentChangeYPos": 0,
  814.     "filamentChangeZAdd": 2,
  815.     "filamentChangeRehome": 1,
  816.     "filamentChangeShortRetract": 5,
  817.     "filamentChangeLongRetract": 50,
  818.     "fanKickstart": 200,
  819.     "servo0StartPos": -1,
  820.     "servo1StartPos": -1,
  821.     "servo2StartPos": -1,
  822.     "servo3StartPos": -1,
  823.     "uiDynamicEncoderSpeed": "1",
  824.     "uiServoControl": 0,
  825.     "killIfSensorDefect": "1",
  826.     "hasMAX6675": false,
  827.     "hasMAX31855": false,
  828.     "hasGeneric1": true,
  829.     "hasGeneric2": true,
  830.     "hasGeneric3": false,
  831.     "hasUser0": true,
  832.     "hasUser1": false,
  833.     "hasUser2": false,
  834.     "numExtruder": 1,
  835.     "version": 92.2
  836. }
  837. ========== End configuration string ==========
  838.  
  839. */
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!