Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- OpenWrt kernel loader for AR7XXX/AR9XXX
- Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
- Decompressing kernel... done!
- Starting kernel at 80060000...
- [ 0.000000] Linux version 3.10.49 (andrew@netbook) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4
- .8-2014.04 r42887) ) #5 Mon Jan 12 15:41:46 EET 2015
- [ 0.000000] bootconsole [early0] enabled
- [ 0.000000] CPU revision is: 0001974c (MIPS 74Kc)
- [ 0.000000] SoC: Atheros AR9344 rev 2
- [ 0.000000] Clocks: CPU:600.000MHz, DDR:400.000MHz, AHB:400.000MHz, Ref:25.000MHz
- [ 0.000000] Determined physical RAM map:
- [ 0.000000] memory: 08000000 @ 00000000 (usable)
- [ 0.000000] User-defined physical RAM map:
- [ 0.000000] memory: 08000000 @ 00000000 (usable)
- [ 0.000000] Initrd not found or empty - disabling initrd
- [ 0.000000] Zone ranges:
- [ 0.000000] Normal [mem 0x00000000-0x07ffffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x00000000-0x07ffffff]
- [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
- [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
- [ 0.000000] Kernel command line: no-uart parts=1 boot_part_size=4194304 gpio=249387 HZ=300
- 000000 mem=128M kmac=D4:CA:6D:92:A4:7E board=951G ver=3.19 boot=1 mlc=7 console=ttyS0,115200 r
- ootfstype=yaffs noinitrd
- [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
- [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
- [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
- [ 0.000000] Writing ErrCtl register=00000000
- [ 0.000000] Readback ErrCtl register=00000000
- [ 0.000000] Memory: 126448k/131072k available (2213k kernel code, 4624k reserved, 439k data
- , 224k init, 0k highmem)
- [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- [ 0.000000] NR_IRQS:51
- [ 0.000000] Calibrating delay loop... 299.82 BogoMIPS (lpj=1499136)
- [ 0.070000] pid_max: default: 32768 minimum: 301
- [ 0.070000] Mount-cache hash table entries: 512
- [ 0.080000] NET: Registered protocol family 16
- [ 0.090000] MIPS: machine is MikroTik RouterBOARD 951G-2HnD
- [ 0.310000] bio: create slab <bio-0> at 0
- [ 0.320000] Switching to clocksource MIPS
- [ 0.320000] NET: Registered protocol family 2
- [ 0.330000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
- [ 0.330000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.340000] TCP: Hash tables configured (established 1024 bind 1024)
- [ 0.340000] TCP: reno registered
- [ 0.350000] UDP hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.350000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.360000] NET: Registered protocol family 1
- [ 0.380000] msgmni has been set to 246
- [ 0.380000] io scheduler noop registered
- [ 0.390000] io scheduler deadline registered (default)
- [ 0.390000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
- [ 0.420000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
- [ 0.430000] console [ttyS0] enabled, bootconsole disabled
- [ 0.430000] console [ttyS0] enabled, bootconsole disabled
- [ 0.440000] NAND device: Manufacturer ID: 0x98, Chip ID: 0xf1 (Toshiba NAND 128MiB 3,3V 8-b
- it), 128MiB, page size: 2048, OOB size: 64
- [ 0.450000] Scanning device for bad blocks
- [ 0.560000] Creating 3 MTD partitions on "ar934x-nfc":
- [ 0.560000] 0x000000000000-0x000000040000 : "booter"
- [ 0.570000] 0x000000040000-0x000000400000 : "kernel"
- [ 0.580000] 0x000000400000-0x000008000000 : "rootfs"
- [ 0.580000] mtd: device 2 (rootfs) set to be root filesystem
- [ 0.590000] mtdsplit: no squashfs found in "rootfs"
- [ 0.590000] mtdsplit: no squashfs found in "ar934x-nfc"
- [ 0.640000] switch0: Atheros AR8327 rev. 4 switch registered on ag71xx-mdio.0
- [ 1.900000] libphy: ag71xx_mdio: probed
- [ 2.450000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd034, driver=Ath
- eros AR8216/AR8236/AR8316]
- [ 2.460000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII
- [ 2.470000] TCP: cubic registered
- [ 2.480000] NET: Registered protocol family 17
- [ 2.480000] 8021q: 802.1Q VLAN Support v1.8
- [ 2.490000] yaffs: dev is 32505858 name is "mtdblock2" ro
- [ 2.490000] yaffs: passed flags ""
- [ 2.810000] VFS: Mounted root (yaffs filesystem) readonly on device 31:2.
- [ 2.820000] Freeing unused kernel memory: 224K (802f8000 - 80330000)
- procd: Console is alive
- procd: - watchdog -
- [ 4.190000] usbcore: registered new interface driver usbfs
- [ 4.200000] usbcore: registered new interface driver hub
- [ 4.200000] usbcore: registered new device driver usb
- [ 4.210000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 4.220000] ehci-platform: EHCI generic platform driver
- [ 4.230000] ehci-platform ehci-platform: EHCI Host Controller
- [ 4.230000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
- [ 4.240000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
- [ 4.270000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
- [ 4.270000] hub 1-0:1.0: USB hub found
- [ 4.280000] hub 1-0:1.0: 1 port detected
- [ 4.280000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- procd: - preinit -
- Press the [f] key and hit [enter] to enter failsafe mode
- Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
- [ 4.600000] usb 1-1: new high-speed USB device number 2 using ehci-platform
- [ 6.450000] eth0: link up (1000Mbps/Full duplex)
- mounting /dev/root
- [ 7.680000] eth0: link down
- procd: - early -
- procd: - watchdog -
- Failed to connect to ubus
- procd: - ubus -
- procd: - init -
- Please press Enter to activate this console.
- [ 10.190000] NET: Registered protocol family 10
- [ 10.210000] zram: Created 1 device(s) ...
- [ 10.210000] tun: Universal TUN/TAP device driver, 1.6
- [ 10.220000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 10.250000] l2tp_core: L2TP core driver, V2.0
- [ 10.260000] l2tp_netlink: L2TP netlink interface
- [ 10.270000] sit: IPv6 over IPv4 tunneling driver
- [ 10.310000] gre: GRE over IPv4 demultiplexor driver
- [ 10.310000] ip_gre: GRE over IPv4 tunneling driver
- [ 10.340000] nf_conntrack version 0.5.0 (1979 buckets, 7916 max)
- [ 10.350000] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 10.410000] u32 classifier
- [ 10.410000] input device check on
- [ 10.420000] Actions configured
- [ 10.420000] Mirror/redirect action on
- [ 10.460000] Loading modules backported from Linux version master-2014-05-22-0-gf2032ea
- [ 10.460000] Backport generated by backports.git backports-20140320-37-g5c33da0
- [ 10.490000] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 10.580000] usbcore: registered new interface driver usblp
- [ 10.600000] usbcore: registered new interface driver usbserial
- [ 10.600000] usbcore: registered new interface driver usbserial_generic
- [ 10.620000] usbserial: USB Serial support registered for generic
- [ 10.690000] xt_time: kernel timezone is -0000
- [ 10.740000] cfg80211: Calling CRDA to update world regulatory domain
- [ 10.740000] cfg80211: World regulatory domain updated:
- [ 10.750000] cfg80211: DFS Master region: unset
- [ 10.750000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp),
- (dfs_cac_time)
- [ 10.760000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
- [ 10.770000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
- [ 10.780000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
- [ 10.790000] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
- [ 10.800000] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
- [ 10.810000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
- [ 10.810000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
- [ 10.820000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
- [ 10.950000] PPP generic driver version 2.4.2
- [ 10.960000] PPP MPPE Compression module registered
- [ 10.960000] NET: Registered protocol family 24
- [ 10.970000] PPTP driver version 0.8.5
- [ 11.070000] l2tp_ppp: PPPoL2TP kernel driver, V2.0
- [ 11.080000] usbcore: registered new interface driver option
- [ 11.100000] usbserial: USB Serial support registered for GSM modem (1-port)
- [ 11.160000] cfg80211: Calling CRDA for country: US
- [ 11.160000] cfg80211: Regulatory domain changed to country: US
- [ 11.170000] cfg80211: DFS Master region: FCC
- [ 11.170000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp),
- (dfs_cac_time)
- [ 11.180000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
- [ 11.190000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm), (N/A)
- [ 11.200000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm), (0 s)
- [ 11.210000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
- [ 11.220000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
- [ 11.230000] ieee80211 phy0: Atheros AR9340 Rev:0 mem=0xb8100000, irq=47
- [ 13.080000] Adding 62460k swap on /dev/zram0. Priority:-1 extents:1 across:62460k SS
- [ 19.560000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 19.570000] IPv6: ADDRCONF(NETDEV_UP): eth0.1: link is not ready
- [ 19.580000] device eth0.1 entered promiscuous mode
- [ 19.590000] device eth0 entered promiscuous mode
- [ 19.590000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
- [ 19.630000] IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready
- [ 21.480000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 21.480000] device wlan0 entered promiscuous mode
- [ 21.490000] br-lan: port 2(wlan0) entered forwarding state
- [ 21.490000] br-lan: port 2(wlan0) entered forwarding state
- [ 21.540000] eth0: link up (1000Mbps/Full duplex)
- [ 21.550000] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
- [ 21.560000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 21.570000] br-lan: port 2(wlan0) entered disabled state
- [ 21.570000] br-lan: port 1(eth0.1) entered forwarding state
- [ 21.580000] br-lan: port 1(eth0.1) entered forwarding state
- [ 21.580000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
- [ 21.590000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready
- [ 22.790000] br-lan: port 2(wlan0) entered forwarding state
- [ 22.800000] br-lan: port 2(wlan0) entered forwarding state
- [ 22.800000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 23.580000] br-lan: port 1(eth0.1) entered forwarding state
- procd: Not starting instance igmpproxy::instance1, an error was indicated
- procd: - init complete -
- [ 24.800000] br-lan: port 2(wlan0) entered forwarding state
- BusyBox v1.22.1 (2015-01-10 16:24:45 EET) built-in shell (ash)
- Enter 'help' for a list of built-in commands.
- _______ ________ __
- | |.-----.-----.-----.| | | |.----.| |_
- | - || _ | -__| || | | || _|| _|
- |_______|| __|_____|__|__||________||__| |____|
- |__| W I R E L E S S F R E E D O M
- -----------------------------------------------------
- BARRIER BREAKER (Barrier Breaker, r43889)
- -----------------------------------------------------
- * 1/2 oz Galliano Pour all ingredients into
- * 4 oz cold Coffee an irish coffee mug filled
- * 1 1/2 oz Dark Rum with crushed ice. Stir.
- * 2 tsp. Creme de Cacao
- -----------------------------------------------------
- root@OpenWrt:/#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement