API tools faq
paste
Advertisement
kgolding

Olimex A20, buildroot next branch 2015-09-17

kgolding
Sep 17th, 2015
171
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.53 KB | None | 0 0
raw download clone embed print report
  1. U-Boot SPL 2015.04 (Sep 16 2015 - 09:57:21)
  2. DRAM: 1024 MiB
  3. Failed to set core voltage! Can't set CPU frequency
  4.  
  5.  
  6. U-Boot 2015.04 (Sep 16 2015 - 09:57:21) Allwinner Technology
  7.  
  8. CPU: Allwinner A20 (SUN7I)
  9. I2C: ready
  10. DRAM: 1 GiB
  11. MMC: SUNXI SD/MMC: 0, SUNXI SD/MMC: 1
  12. *** Warning - bad CRC, using default environment
  13.  
  14. Setting up a 1024x768 vga console
  15. In: serial
  16. Out: vga
  17. Err: vga
  18. SCSI: SUNXI SCSI INIT
  19. SATA link 0 timeout.
  20. AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
  21. flags: ncq stag pm led clo only pmp pio slum part ccc apst
  22. Net: dwmac.1c50000
  23. starting USB...
  24. USB0: USB EHCI 1.00
  25. scanning bus 0 for devices... 1 USB Device(s) found
  26. USB1: USB EHCI 1.00
  27. scanning bus 1 for devices... 1 USB Device(s) found
  28. scanning usb for storage devices... 0 Storage Device(s) found
  29. Hit any key to stop autoboot: 2 [08][08][08] 1 [08][08][08] 0
  30. switch to partitions #0, OK
  31. mmc0 is current device
  32. Scanning mmc 0:1...
  33. Found U-Boot script /boot/boot.scr
  34. 294 bytes read in 276 ms (1000 Bytes/s)
  35. ## Executing script at 43100000
  36. 26206 bytes read in 315 ms (81.1 KiB/s)
  37. 2702088 bytes read in 702 ms (3.7 MiB/s)
  38. Kernel image @ 0x46000000 [ 0x000000 - 0x293b08 ]
  39. ## Flattened Device Tree blob at 49000000
  40. Booting using the fdt blob at 0x49000000
  41. Using Device Tree in place at 49000000, end 4900965d
  42.  
  43. Starting kernel ...
  44.  
  45. [ 0.000000] Booting Linux on physical CPU 0x0
  46. [ 0.000000] Linux version 4.0.5 (kgolding@HP-Compaq-8200-Elite-SFF-PC) (gcc version 4.9.3 (Buildroot 2015.11-git-00199-gbb16637) ) #1 SMP Wed Sep 16 09:02:40 BST 2015
  47. [ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
  48. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  49. [ 0.000000] Machine model: Olimex A20-Olinuxino Micro
  50. [ 0.000000] Memory policy: Data cache writealloc
  51. [ 0.000000] psci: probing for conduit method from DT.
  52. [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT
  53. [ 0.000000] PERCPU: Embedded 8 pages/cpu @eefd0000 s10944 r0 d21824 u32768
  54. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259856
  55. [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait panic=10
  56. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  57. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  58. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  59. [ 0.000000] Memory: 1030880K/1045504K available (3940K kernel code, 176K rwdata, 824K rodata, 240K init, 228K bss, 14624K reserved, 0K cma-reserved, 267264K highmem)
  60. [ 0.000000] Virtual kernel memory layout:
  61. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  62. [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  63. [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  64. [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  65. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  66. [ 0.000000] .text : 0xc0008000 - 0xc04af604 (4766 kB)
  67. [ 0.000000] .init : 0xc04b0000 - 0xc04ec000 ( 240 kB)
  68. [ 0.000000] .data : 0xc04ec000 - 0xc0518200 ( 177 kB)
  69. [ 0.000000] .bss : 0xc0518200 - 0xc055153c ( 229 kB)
  70. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  71. [ 0.000000] Hierarchical RCU implementation.
  72. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
  73. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
  74. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  75. [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
  76. [ 0.000016] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns
  77. [ 0.000042] Switching to timer-based delay loop, resolution 41ns
  78. [ 0.000769] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns
  79. [ 0.001438] Console: colour dummy device 80x30
  80. [ 0.001485] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
  81. [ 0.001514] pid_max: default: 32768 minimum: 301
  82. [ 0.001739] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  83. [ 0.001766] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  84. [ 0.002753] CPU: Testing write buffer coherency: ok
  85. [ 0.003170] /cpus/cpu@0 missing clock-frequency property
  86. [ 0.003204] /cpus/cpu@1 missing clock-frequency property
  87. [ 0.003229] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  88. [ 0.003326] Setting up static identity map for 0x403be990 - 0x403be9e8
  89. [ 0.005727] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  90. [ 0.005872] Brought up 2 CPUs
  91. [ 0.005908] SMP: Total of 2 processors activated (96.00 BogoMIPS).
  92. [ 0.005921] CPU: All CPU(s) started in HYP mode.
  93. [ 0.005933] CPU: Virtualization extensions available.
  94. [ 0.006942] devtmpfs: initialized
  95. [ 0.008439] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
  96. [ 0.009302] pinctrl core: initialized pinctrl subsystem
  97. [ 0.025408] NET: Registered protocol family 16
  98. [ 0.025990] DMA: preallocated 256 KiB pool for atomic coherent allocations
  99. [ 0.040261] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  100. [ 0.040288] hw-breakpoint: maximum watchpoint size is 8 bytes.
  101. [ 0.054290] reg-fixed-voltage ahci-5v: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/ahci_pwr_pin@0, deferring probe
  102. [ 0.054341] platform ahci-5v: Driver reg-fixed-voltage requests probe deferral
  103. [ 0.054400] reg-fixed-voltage usb1-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe
  104. [ 0.054430] platform usb1-vbus: Driver reg-fixed-voltage requests probe deferral
  105. [ 0.054484] reg-fixed-voltage usb2-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe
  106. [ 0.054514] platform usb2-vbus: Driver reg-fixed-voltage requests probe deferral
  107. [ 0.056707] SCSI subsystem initialized
  108. [ 0.057664] usbcore: registered new interface driver usbfs
  109. [ 0.057778] usbcore: registered new interface driver hub
  110. [ 0.057918] usbcore: registered new device driver usb
  111. [ 0.058243] pps_core: LinuxPPS API ver. 1 registered
  112. [ 0.058261] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  113. [ 0.058325] PTP clock support registered
  114. [ 0.060391] Switched to clocksource arch_sys_counter
  115. [ 0.081979] NET: Registered protocol family 2
  116. [ 0.083230] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  117. [ 0.083444] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  118. [ 0.083741] TCP: Hash tables configured (established 8192 bind 8192)
  119. [ 0.083877] TCP: reno registered
  120. [ 0.083907] UDP hash table entries: 512 (order: 2, 16384 bytes)
  121. [ 0.083993] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  122. [ 0.084392] NET: Registered protocol family 1
  123. [ 0.084981] RPC: Registered named UNIX socket transport module.
  124. [ 0.085006] RPC: Registered udp transport module.
  125. [ 0.085019] RPC: Registered tcp transport module.
  126. [ 0.085033] RPC: Registered tcp NFSv4.1 backchannel transport module.
  127. [ 0.085967] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
  128. [ 0.088310] futex hash table entries: 512 (order: 3, 32768 bytes)
  129. [ 0.111405] NFS: Registering the id_resolver key type
  130. [ 0.111512] Key type id_resolver registered
  131. [ 0.111528] Key type id_legacy registered
  132. [ 0.111912] bounce: pool size: 64 pages
  133. [ 0.112359] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
  134. [ 0.112393] io scheduler noop registered
  135. [ 0.112418] io scheduler deadline registered
  136. [ 0.112832] io scheduler cfq registered (default)
  137. [ 0.113808] platform 1c13400.phy: Driver sun4i-usb-phy requests probe deferral
  138. [ 0.119091] sun7i-a20-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
  139. [ 0.245870] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
  140. [ 0.252242] console [ttyS0] disabled
  141. [ 0.272532] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 43, base_baud = 1500000) is a U6_16550A
  142. [ 0.873769] console [ttyS0] enabled
  143. [ 0.902094] 1c29800.serial: ttyS1 at MMIO 0x1c29800 (irq = 44, base_baud = 1500000) is a U6_16550A
  144. [ 0.936046] 1c29c00.serial: ttyS2 at MMIO 0x1c29c00 (irq = 45, base_baud = 1500000) is a U6_16550A
  145. [ 0.948327] platform 1c18000.sata: Driver ahci-sunxi requests probe deferral
  146. [ 0.959811] stmmaceth 1c50000.ethernet: no regulator found
  147. [ 0.965451] stmmaceth 1c50000.ethernet: no reset control found
  148. [ 0.971318] Ring mode enabled
  149. [ 0.974379] No HW DMA feature register supported
  150. [ 0.978911] Normal descriptors
  151. [ 0.982259] TX Checksum insertion supported
  152. [ 0.990298] libphy: stmmac: probed
  153. [ 0.993757] eth0: PHY ID 00008201 at 1 IRQ POLL (stmmac-0:01) active
  154. [ 1.000320] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  155. [ 1.006917] ehci-platform: EHCI generic platform driver
  156. [ 1.012521] platform 1c14000.usb: Driver ehci-platform requests probe deferral
  157. [ 1.019925] platform 1c1c000.usb: Driver ehci-platform requests probe deferral
  158. [ 1.027400] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  159. [ 1.033666] ohci-platform: OHCI generic platform driver
  160. [ 1.039160] platform 1c14400.usb: Driver ohci-platform requests probe deferral
  161. [ 1.046597] platform 1c1c400.usb: Driver ohci-platform requests probe deferral
  162. [ 1.056072] sunxi-rtc 1c20d00.rtc: rtc core: registered rtc-sunxi as rtc0
  163. [ 1.062945] sunxi-rtc 1c20d00.rtc: RTC enabled
  164. [ 1.067589] i2c /dev entries driver
  165. [ 1.072906] axp20x 0-0034: AXP20x variant AXP209 found
  166. [ 1.078568] axp20x 0-0034: Failed to set masks in 0x40: -6
  167. [ 1.084143] axp20x 0-0034: failed to add irq chip: -6
  168. [ 1.092668] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
  169. [ 1.100953] Driver 'mmcblk' needs updating - please use bus_type methods
  170. [ 1.108642] sunxi-mmc 1c0f000.mmc: No vqmmc regulator found
  171. [ 1.114890] sunxi-mmc 1c0f000.mmc: Got CD GPIO
  172. [ 1.150718] sunxi-mmc 1c0f000.mmc: base:0xf00b8000 irq:27
  173. [ 1.157112] sunxi-mmc 1c12000.mmc: No vqmmc regulator found
  174. [ 1.163488] sunxi-mmc 1c12000.mmc: Got CD GPIO
  175. [ 1.200739] sunxi-mmc 1c12000.mmc: base:0xf00bc000 irq:28
  176. [ 1.208909] usbcore: registered new interface driver usbhid
  177. [ 1.214578] usbhid: USB HID core driver
  178. [ 1.220232] TCP: cubic registered
  179. [ 1.223659] NET: Registered protocol family 17
  180. [ 1.228151] mmc0: host does not support reading read-only switch, assuming write-e
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!