Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.4.9-gentoo (root@ubuntu) (gcc version 4.5.4 (Gentoo 4.5.4 p1.0, pie-0.4.7) ) #1 SMP Fri Sep 21 21:24:36 Local time zone must be set--see zic
- [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.4.9-gentoo root=/dev/sde4 ro rootfstype=ext4
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009a000 (usable)
- [ 0.000000] BIOS-e820: 000000000009a000 - 00000000000a0000 (reserved)
- [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
- [ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
- [ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
- [ 0.000000] BIOS-e820: 0000000020200000 - 0000000040000000 (usable)
- [ 0.000000] BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)
- [ 0.000000] BIOS-e820: 0000000040200000 - 00000000bad6d000 (usable)
- [ 0.000000] BIOS-e820: 00000000bad6d000 - 00000000badbc000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 00000000badbc000 - 00000000badc5000 (ACPI data)
- [ 0.000000] BIOS-e820: 00000000badc5000 - 00000000badf2000 (reserved)
- [ 0.000000] BIOS-e820: 00000000badf2000 - 00000000badf3000 (usable)
- [ 0.000000] BIOS-e820: 00000000badf3000 - 00000000bae03000 (reserved)
- [ 0.000000] BIOS-e820: 00000000bae03000 - 00000000bae10000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 00000000bae10000 - 00000000bae38000 (reserved)
- [ 0.000000] BIOS-e820: 00000000bae38000 - 00000000bae7b000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 00000000bae7b000 - 00000000bb000000 (usable)
- [ 0.000000] BIOS-e820: 00000000bb800000 - 00000000bfa00000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed40000 (reserved)
- [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
- [ 0.000000] BIOS-e820: 0000000100000000 - 000000043fe00000 (usable)
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] DMI 2.7 present.
- [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./Z68 Professional Gen3, BIOS P1.30 08/15/2011
- [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
- [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
- [ 0.000000] No AGP bridge found
- [ 0.000000] last_pfn = 0x43fe00 max_arch_pfn = 0x400000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-DFFFF write-protect
- [ 0.000000] E0000-EBFFF uncachable
- [ 0.000000] EC000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 000000000 mask C00000000 write-back
- [ 0.000000] 1 base 400000000 mask FC0000000 write-back
- [ 0.000000] 2 base 0BB800000 mask FFF800000 uncachable
- [ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable
- [ 0.000000] 4 base 0C0000000 mask FC0000000 uncachable
- [ 0.000000] 5 base 43FE00000 mask FFFE00000 uncachable
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] 8 disabled
- [ 0.000000] 9 disabled
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] e820 update range: 00000000bb800000 - 0000000100000000 (usable) ==> (reserved)
- [ 0.000000] last_pfn = 0xbb000 max_arch_pfn = 0x400000000
- [ 0.000000] found SMP MP-table at [ffff8800000fd210] fd210
- [ 0.000000] initial memory mapped : 0 - 20000000
- [ 0.000000] Base memory trampoline at [ffff880000095000] 95000 size 20480
- [ 0.000000] init_memory_mapping: 0000000000000000-00000000bb000000
- [ 0.000000] 0000000000 - 00bb000000 page 2M
- [ 0.000000] kernel direct mapping tables up to bb000000 @ 1fffc000-20000000
- [ 0.000000] init_memory_mapping: 0000000100000000-000000043fe00000
- [ 0.000000] 0100000000 - 043fe00000 page 2M
- [ 0.000000] kernel direct mapping tables up to 43fe00000 @ bafee000-bb000000
- [ 0.000000] ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA)
- [ 0.000000] ACPI: XSDT 00000000badbc068 00054 (v01 ALASKA A M I 01072009 AMI 00010013)
- [ 0.000000] ACPI: FACP 00000000badc45d8 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
- [ 0.000000] ACPI: DSDT 00000000badbc150 08487 (v02 ALASKA A M I 00000000 INTL 20051117)
- [ 0.000000] ACPI: FACS 00000000bae07f80 00040
- [ 0.000000] ACPI: APIC 00000000badc46d0 00092 (v03 ALASKA A M I 01072009 AMI 00010013)
- [ 0.000000] ACPI: SSDT 00000000badc4768 001D6 (v01 AMICPU PROC 00000001 MSFT 03000001)
- [ 0.000000] ACPI: MCFG 00000000badc4940 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
- [ 0.000000] ACPI: AAFT 00000000badc4980 000D4 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
- [ 0.000000] ACPI: HPET 00000000badc4a58 00038 (v01 ALASKA A M I 01072009 AMI. 00000004)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] No NUMA configuration found
- [ 0.000000] Faking a node at 0000000000000000-000000043fe00000
- [ 0.000000] Initmem setup node 0 0000000000000000-000000043fe00000
- [ 0.000000] NODE_DATA [000000043fdfc000 - 000000043fdfffff]
- [ 0.000000] [ffffea0000000000-ffffea0010ffffff] PMD -> [ffff88042f400000-ffff88043f3fffff] on node 0
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0x00000010 -> 0x00001000
- [ 0.000000] DMA32 0x00001000 -> 0x00100000
- [ 0.000000] Normal 0x00100000 -> 0x0043fe00
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] Early memory PFN ranges
- [ 0.000000] 0: 0x00000010 -> 0x0000009a
- [ 0.000000] 0: 0x00000100 -> 0x00020000
- [ 0.000000] 0: 0x00020200 -> 0x00040000
- [ 0.000000] 0: 0x00040200 -> 0x000bad6d
- [ 0.000000] 0: 0x000badf2 -> 0x000badf3
- [ 0.000000] 0: 0x000bae7b -> 0x000bb000
- [ 0.000000] 0: 0x00100000 -> 0x0043fe00
- [ 0.000000] On node 0 totalpages: 4171901
- [ 0.000000] DMA zone: 64 pages used for memmap
- [ 0.000000] DMA zone: 5 pages reserved
- [ 0.000000] DMA zone: 3909 pages, LIFO batch:0
- [ 0.000000] DMA32 zone: 16320 pages used for memmap
- [ 0.000000] DMA32 zone: 744243 pages, LIFO batch:31
- [ 0.000000] Normal zone: 53240 pages used for memmap
- [ 0.000000] Normal zone: 3354120 pages, LIFO batch:31
- [ 0.000000] ACPI: PM-Timer IO Port: 0x408
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
- [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
- [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 40
- [ 0.000000] PM: Registered nosave memory: 000000000009a000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
- [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
- [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
- [ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
- [ 0.000000] PM: Registered nosave memory: 00000000bad6d000 - 00000000badbc000
- [ 0.000000] PM: Registered nosave memory: 00000000badbc000 - 00000000badc5000
- [ 0.000000] PM: Registered nosave memory: 00000000badc5000 - 00000000badf2000
- [ 0.000000] PM: Registered nosave memory: 00000000badf3000 - 00000000bae03000
- [ 0.000000] PM: Registered nosave memory: 00000000bae03000 - 00000000bae10000
- [ 0.000000] PM: Registered nosave memory: 00000000bae10000 - 00000000bae38000
- [ 0.000000] PM: Registered nosave memory: 00000000bae38000 - 00000000bae7b000
- [ 0.000000] PM: Registered nosave memory: 00000000bb000000 - 00000000bb800000
- [ 0.000000] PM: Registered nosave memory: 00000000bb800000 - 00000000bfa00000
- [ 0.000000] PM: Registered nosave memory: 00000000bfa00000 - 00000000fed1c000
- [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed40000
- [ 0.000000] PM: Registered nosave memory: 00000000fed40000 - 00000000ff000000
- [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
- [ 0.000000] Allocating PCI resources starting at bfa00000 (gap: bfa00000:3f31c000)
- [ 0.000000] setup_percpu: NR_CPUS:10 nr_cpumask_bits:10 nr_cpu_ids:8 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff88043fa00000 s77568 r8192 d20736 u262144
- [ 0.000000] pcpu-alloc: s77568 r8192 d20736 u262144 alloc=1*2097152
- [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4102272
- [ 0.000000] Policy zone: Normal
- [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.4.9-gentoo root=/dev/sde4 ro rootfstype=ext4
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
- [ 0.000000] Checking aperture...
- [ 0.000000] No AGP bridge found
- [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
- [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
- [ 0.000000] Memory: 16343768k/17823744k available (6903k kernel code, 1136140k absent, 343836k reserved, 6082k data, 564k init)
- [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:4352 nr_irqs:744 16
- [ 0.000000] Extended CMOS year: 2000
- [ 0.000000] Console: colour VGA+ 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] hpet clockevent registered
- [ 0.000000] Fast TSC calibration using PIT
- [ 0.001000] Detected 3491.879 MHz processor.
- [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6983.75 BogoMIPS (lpj=3491879)
- [ 0.000261] pid_max: default: 32768 minimum: 301
- [ 0.000395] Security Framework initialized
- [ 0.000518] SELinux: Initializing.
- [ 0.000643] SELinux: Starting in permissive mode
- [ 0.001244] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
- [ 0.003663] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
- [ 0.004844] Mount-cache hash table entries: 256
- [ 0.005073] Initializing cgroup subsys cpuacct
- [ 0.005197] Initializing cgroup subsys freezer
- [ 0.005333] CPU: Physical Processor ID: 0
- [ 0.005455] CPU: Processor Core ID: 0
- [ 0.005578] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
- [ 0.005579] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
- [ 0.005848] mce: CPU supports 9 MCE banks
- [ 0.005980] CPU0: Thermal monitoring enabled (TM1)
- [ 0.006109] using mwait in idle threads.
- [ 0.006284] ACPI: Core revision 20120320
- [ 0.010493] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.020614] CPU0: Intel(R) Core(TM) i7-2700K CPU @ 3.50GHz stepping 07
- [ 0.122662] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
- [ 0.123022] PEBS disabled due to CPU errata.
- [ 0.123146] ... version: 3
- [ 0.123268] ... bit width: 48
- [ 0.123391] ... generic registers: 4
- [ 0.123513] ... value mask: 0000ffffffffffff
- [ 0.123639] ... max period: 000000007fffffff
- [ 0.123767] ... fixed-purpose events: 3
- [ 0.123889] ... event mask: 000000070000000f
- [ 0.124101] Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 Ok.
- [ 0.217099] Brought up 8 CPUs
- [ 0.217221] Total of 8 processors activated (55870.06 BogoMIPS).
- [ 0.222905] PM: Registering ACPI NVS region [mem 0xbad6d000-0xbadbbfff] (323584 bytes)
- [ 0.223117] PM: Registering ACPI NVS region [mem 0xbae03000-0xbae0ffff] (53248 bytes)
- [ 0.223325] PM: Registering ACPI NVS region [mem 0xbae38000-0xbae7afff] (274432 bytes)
- [ 0.223570] RTC time: 2:17:45, date: 08/16/11
- [ 0.223713] NET: Registered protocol family 16
- [ 0.223906] kworker/u:0 used greatest stack depth: 5456 bytes left
- [ 0.224141] ACPI: bus type pci registered
- [ 0.224306] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 0.224518] PCI: not using MMCONFIG
- [ 0.224641] PCI: Using configuration type 1 for base access
- [ 0.227966] bio: create slab <bio-0> at 0
- [ 0.228146] ACPI: Added _OSI(Module Device)
- [ 0.228269] ACPI: Added _OSI(Processor Device)
- [ 0.228392] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.228516] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.229366] ACPI: EC: Look up EC in DSDT
- [ 0.230122] ACPI: Executed 1 blocks of module-level executable AML code
- [ 0.232401] ACPI: SSDT 00000000bae0f898 006F4 (v01 AMI IST 00000001 MSFT 03000001)
- [ 0.232925] ACPI: Dynamic OEM Table Load:
- [ 0.233123] ACPI: SSDT (null) 006F4 (v01 AMI IST 00000001 MSFT 03000001)
- [ 0.233426] ACPI: SSDT 00000000bae06d98 000E4 (v01 AMI CST 00000001 MSFT 03000001)
- [ 0.233891] ACPI: Dynamic OEM Table Load:
- [ 0.234089] ACPI: SSDT (null) 000E4 (v01 AMI CST 00000001 MSFT 03000001)
- [ 0.234850] ACPI: Interpreter enabled
- [ 0.234973] ACPI: (supports S0 S1 S3 S4 S5)
- [ 0.236761] ACPI: Using IOAPIC for interrupt routing
- [ 0.236898] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 0.237143] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
- [ 0.277114] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
- [ 0.280645] ACPI: No dock devices found.
- [ 0.280769] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 0.281114] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- [ 0.281358] pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af]
- [ 0.281489] pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7]
- [ 0.281621] pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df]
- [ 0.281751] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
- [ 0.281881] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
- [ 0.282087] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
- [ 0.282292] pci_root PNP0A08:00: host bridge window [mem 0xbfa00000-0xffffffff]
- [ 0.282522] PCI host bridge to bus 0000:00
- [ 0.282646] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
- [ 0.282774] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
- [ 0.282904] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
- [ 0.283033] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
- [ 0.283162] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
- [ 0.283294] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
- [ 0.283426] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xffffffff]
- [ 0.283563] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
- [ 0.283589] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
- [ 0.283610] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
- [ 0.283619] pci 0000:00:01.1: [8086:0105] type 01 class 0x060400
- [ 0.283640] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
- [ 0.283657] pci 0000:00:02.0: [8086:0122] type 00 class 0x038000
- [ 0.283664] pci 0000:00:02.0: reg 10: [mem 0xfa400000-0xfa7fffff 64bit]
- [ 0.283668] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref]
- [ 0.283671] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]
- [ 0.283726] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
- [ 0.283756] pci 0000:00:16.0: reg 10: [mem 0xfb208000-0xfb20800f 64bit]
- [ 0.283858] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
- [ 0.283902] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
- [ 0.283930] pci 0000:00:1a.0: reg 10: [mem 0xfb207000-0xfb2073ff]
- [ 0.284055] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
- [ 0.284089] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
- [ 0.284109] pci 0000:00:1b.0: reg 10: [mem 0xfb200000-0xfb203fff 64bit]
- [ 0.284208] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- [ 0.284234] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
- [ 0.284345] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- [ 0.284377] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
- [ 0.284489] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
- [ 0.284522] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
- [ 0.284633] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
- [ 0.284664] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
- [ 0.284775] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
- [ 0.284806] pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400
- [ 0.284917] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
- [ 0.284948] pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400
- [ 0.285058] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
- [ 0.285094] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
- [ 0.285122] pci 0000:00:1d.0: reg 10: [mem 0xfb206000-0xfb2063ff]
- [ 0.285246] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
- [ 0.285277] pci 0000:00:1f.0: [8086:1c44] type 00 class 0x060100
- [ 0.285441] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
- [ 0.285467] pci 0000:00:1f.2: reg 10: [io 0xf0b0-0xf0b7]
- [ 0.285478] pci 0000:00:1f.2: reg 14: [io 0xf0a0-0xf0a3]
- [ 0.285488] pci 0000:00:1f.2: reg 18: [io 0xf090-0xf097]
- [ 0.285498] pci 0000:00:1f.2: reg 1c: [io 0xf080-0xf083]
- [ 0.285510] pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f]
- [ 0.285520] pci 0000:00:1f.2: reg 24: [mem 0xfb205000-0xfb2057ff]
- [ 0.285588] pci 0000:00:1f.2: PME# supported from D3hot
- [ 0.285610] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
- [ 0.285630] pci 0000:00:1f.3: reg 10: [mem 0xfb204000-0xfb2040ff 64bit]
- [ 0.285660] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f]
- [ 0.285710] pci 0000:00:01.0: PCI bridge to [bus 01-01]
- [ 0.285858] pci 0000:02:00.0: [10de:1201] type 00 class 0x030000
- [ 0.285866] pci 0000:02:00.0: reg 10: [mem 0xf8000000-0xf9ffffff]
- [ 0.285874] pci 0000:02:00.0: reg 14: [mem 0xd0000000-0xd7ffffff 64bit pref]
- [ 0.285883] pci 0000:02:00.0: reg 1c: [mem 0xd8000000-0xdbffffff 64bit pref]
- [ 0.285888] pci 0000:02:00.0: reg 24: [io 0xe000-0xe07f]
- [ 0.285894] pci 0000:02:00.0: reg 30: [mem 0xfa000000-0xfa07ffff pref]
- [ 0.285937] pci 0000:02:00.1: [10de:0e0c] type 00 class 0x040300
- [ 0.285945] pci 0000:02:00.1: reg 10: [mem 0xfa080000-0xfa083fff]
- [ 0.287522] pci 0000:00:01.1: PCI bridge to [bus 02-02]
- [ 0.287652] pci 0000:00:01.1: bridge window [io 0xe000-0xefff]
- [ 0.287654] pci 0000:00:01.1: bridge window [mem 0xf8000000-0xfa0fffff]
- [ 0.287656] pci 0000:00:01.1: bridge window [mem 0xd0000000-0xdbffffff 64bit pref]
- [ 0.287715] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
- [ 0.287938] pci 0000:04:00.0: [1b21:0612] type 00 class 0x010601
- [ 0.287960] pci 0000:04:00.0: reg 10: [io 0xd050-0xd057]
- [ 0.287976] pci 0000:04:00.0: reg 14: [io 0xd040-0xd043]
- [ 0.287992] pci 0000:04:00.0: reg 18: [io 0xd030-0xd037]
- [ 0.288008] pci 0000:04:00.0: reg 1c: [io 0xd020-0xd023]
- [ 0.288024] pci 0000:04:00.0: reg 20: [io 0xd000-0xd01f]
- [ 0.288040] pci 0000:04:00.0: reg 24: [mem 0xfb110000-0xfb1101ff]
- [ 0.288057] pci 0000:04:00.0: reg 30: [mem 0xfb100000-0xfb10ffff pref]
- [ 0.289524] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
- [ 0.289665] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
- [ 0.289669] pci 0000:00:1c.2: bridge window [mem 0xfb100000-0xfb1fffff]
- [ 0.289759] pci 0000:05:00.0: [1b21:0612] type 00 class 0x010601
- [ 0.289782] pci 0000:05:00.0: reg 10: [io 0xc050-0xc057]
- [ 0.289798] pci 0000:05:00.0: reg 14: [io 0xc040-0xc043]
- [ 0.289814] pci 0000:05:00.0: reg 18: [io 0xc030-0xc037]
- [ 0.289831] pci 0000:05:00.0: reg 1c: [io 0xc020-0xc023]
- [ 0.289847] pci 0000:05:00.0: reg 20: [io 0xc000-0xc01f]
- [ 0.289863] pci 0000:05:00.0: reg 24: [mem 0xfb000000-0xfb0001ff]
- [ 0.291522] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
- [ 0.291654] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
- [ 0.291658] pci 0000:00:1c.4: bridge window [mem 0xfb000000-0xfb0fffff]
- [ 0.291748] pci 0000:06:00.0: [1b21:0612] type 00 class 0x010601
- [ 0.291771] pci 0000:06:00.0: reg 10: [io 0xb050-0xb057]
- [ 0.291787] pci 0000:06:00.0: reg 14: [io 0xb040-0xb043]
- [ 0.291804] pci 0000:06:00.0: reg 18: [io 0xb030-0xb037]
- [ 0.291820] pci 0000:06:00.0: reg 1c: [io 0xb020-0xb023]
- [ 0.291835] pci 0000:06:00.0: reg 20: [io 0xb000-0xb01f]
- [ 0.291852] pci 0000:06:00.0: reg 24: [mem 0xfaf10000-0xfaf101ff]
- [ 0.291868] pci 0000:06:00.0: reg 30: [mem 0xfaf00000-0xfaf0ffff pref]
- [ 0.293520] pci 0000:00:1c.5: PCI bridge to [bus 06-06]
- [ 0.293660] pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
- [ 0.293664] pci 0000:00:1c.5: bridge window [mem 0xfaf00000-0xfaffffff]
- [ 0.293761] pci 0000:07:00.0: [1b21:1042] type 00 class 0x0c0330
- [ 0.293795] pci 0000:07:00.0: reg 10: [mem 0xfae00000-0xfae07fff 64bit]
- [ 0.293974] pci 0000:07:00.0: PME# supported from D3hot D3cold
- [ 0.295519] pci 0000:00:1c.6: PCI bridge to [bus 07-07]
- [ 0.295662] pci 0000:00:1c.6: bridge window [mem 0xfae00000-0xfaefffff]
- [ 0.295752] pci 0000:08:00.0: [10b5:8608] type 01 class 0x060400
- [ 0.295774] pci 0000:08:00.0: reg 10: [mem 0xfad00000-0xfad1ffff]
- [ 0.295907] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
- [ 0.297513] pci 0000:00:1c.7: PCI bridge to [bus 08-11]
- [ 0.297645] pci 0000:00:1c.7: bridge window [io 0x7000-0xafff]
- [ 0.297649] pci 0000:00:1c.7: bridge window [mem 0xfa800000-0xfadfffff]
- [ 0.297656] pci 0000:00:1c.7: bridge window [mem 0xdc100000-0xdc2fffff 64bit pref]
- [ 0.297771] pci 0000:09:01.0: [10b5:8608] type 01 class 0x060400
- [ 0.297926] pci 0000:09:01.0: PME# supported from D0 D3hot D3cold
- [ 0.297983] pci 0000:09:04.0: [10b5:8608] type 01 class 0x060400
- [ 0.298139] pci 0000:09:04.0: PME# supported from D0 D3hot D3cold
- [ 0.298194] pci 0000:09:05.0: [10b5:8608] type 01 class 0x060400
- [ 0.298348] pci 0000:09:05.0: PME# supported from D0 D3hot D3cold
- [ 0.298405] pci 0000:09:06.0: [10b5:8608] type 01 class 0x060400
- [ 0.298561] pci 0000:09:06.0: PME# supported from D0 D3hot D3cold
- [ 0.298620] pci 0000:09:07.0: [10b5:8608] type 01 class 0x060400
- [ 0.298775] pci 0000:09:07.0: PME# supported from D0 D3hot D3cold
- [ 0.298836] pci 0000:09:08.0: [10b5:8608] type 01 class 0x060400
- [ 0.298991] pci 0000:09:08.0: PME# supported from D0 D3hot D3cold
- [ 0.299054] pci 0000:09:09.0: [10b5:8608] type 01 class 0x060400
- [ 0.299209] pci 0000:09:09.0: PME# supported from D0 D3hot D3cold
- [ 0.299294] pci 0000:08:00.0: PCI bridge to [bus 09-11]
- [ 0.299429] pci 0000:08:00.0: bridge window [io 0x7000-0xafff]
- [ 0.299435] pci 0000:08:00.0: bridge window [mem 0xfa800000-0xfacfffff]
- [ 0.299444] pci 0000:08:00.0: bridge window [mem 0xdc100000-0xdc2fffff 64bit pref]
- [ 0.299574] pci 0000:0a:00.0: [1b21:1042] type 00 class 0x0c0330
- [ 0.299614] pci 0000:0a:00.0: reg 10: [mem 0xfac00000-0xfac07fff 64bit]
- [ 0.299827] pci 0000:0a:00.0: PME# supported from D3hot D3cold
- [ 0.299903] pci 0000:09:01.0: PCI bridge to [bus 0a-0a]
- [ 0.300041] pci 0000:09:01.0: bridge window [mem 0xfac00000-0xfacfffff]
- [ 0.300175] pci 0000:0b:00.0: [1b21:1080] type 01 class 0x060400
- [ 0.300389] pci 0000:0b:00.0: supports D1 D2
- [ 0.300390] pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.301514] pci 0000:09:04.0: PCI bridge to [bus 0b-0c]
- [ 0.301663] pci 0000:09:04.0: bridge window [mem 0xfab00000-0xfabfffff]
- [ 0.301817] pci 0000:0c:00.0: [168c:002d] type 00 class 0x028000
- [ 0.301858] pci 0000:0c:00.0: reg 10: [mem 0xfab00000-0xfab0ffff]
- [ 0.302058] pci 0000:0c:00.0: PME# supported from D0 D3hot
- [ 0.302176] pci 0000:0b:00.0: PCI bridge to [bus 0c-0c]
- [ 0.302320] pci 0000:0b:00.0: bridge window [mem 0xfab00000-0xfabfffff]
- [ 0.302475] pci 0000:0d:00.0: [1b21:1042] type 00 class 0x0c0330
- [ 0.302516] pci 0000:0d:00.0: reg 10: [mem 0xfaa00000-0xfaa07fff 64bit]
- [ 0.302729] pci 0000:0d:00.0: PME# supported from D3hot D3cold
- [ 0.302803] pci 0000:09:05.0: PCI bridge to [bus 0d-0d]
- [ 0.302942] pci 0000:09:05.0: bridge window [mem 0xfaa00000-0xfaafffff]
- [ 0.303074] pci 0000:0e:00.0: [10ec:8168] type 00 class 0x020000
- [ 0.303102] pci 0000:0e:00.0: reg 10: [io 0xa000-0xa0ff]
- [ 0.303151] pci 0000:0e:00.0: reg 18: [mem 0xdc204000-0xdc204fff 64bit pref]
- [ 0.303181] pci 0000:0e:00.0: reg 20: [mem 0xdc200000-0xdc203fff 64bit pref]
- [ 0.303316] pci 0000:0e:00.0: supports D1 D2
- [ 0.303317] pci 0000:0e:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.304516] pci 0000:09:06.0: PCI bridge to [bus 0e-0e]
- [ 0.304663] pci 0000:09:06.0: bridge window [io 0xa000-0xafff]
- [ 0.304676] pci 0000:09:06.0: bridge window [mem 0xdc200000-0xdc2fffff 64bit pref]
- [ 0.304798] pci 0000:0f:00.0: [1b21:0612] type 00 class 0x010601
- [ 0.304824] pci 0000:0f:00.0: reg 10: [io 0x9050-0x9057]
- [ 0.304843] pci 0000:0f:00.0: reg 14: [io 0x9040-0x9043]
- [ 0.304862] pci 0000:0f:00.0: reg 18: [io 0x9030-0x9037]
- [ 0.304882] pci 0000:0f:00.0: reg 1c: [io 0x9020-0x9023]
- [ 0.304901] pci 0000:0f:00.0: reg 20: [io 0x9000-0x901f]
- [ 0.304920] pci 0000:0f:00.0: reg 24: [mem 0xfa900000-0xfa9001ff]
- [ 0.306511] pci 0000:09:07.0: PCI bridge to [bus 0f-0f]
- [ 0.306656] pci 0000:09:07.0: bridge window [io 0x9000-0x9fff]
- [ 0.306661] pci 0000:09:07.0: bridge window [mem 0xfa900000-0xfa9fffff]
- [ 0.306791] pci 0000:10:00.0: [10ec:8168] type 00 class 0x020000
- [ 0.306818] pci 0000:10:00.0: reg 10: [io 0x8000-0x80ff]
- [ 0.306867] pci 0000:10:00.0: reg 18: [mem 0xdc104000-0xdc104fff 64bit pref]
- [ 0.306897] pci 0000:10:00.0: reg 20: [mem 0xdc100000-0xdc103fff 64bit pref]
- [ 0.307031] pci 0000:10:00.0: supports D1 D2
- [ 0.307032] pci 0000:10:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.308512] pci 0000:09:08.0: PCI bridge to [bus 10-10]
- [ 0.308657] pci 0000:09:08.0: bridge window [io 0x8000-0x8fff]
- [ 0.308671] pci 0000:09:08.0: bridge window [mem 0xdc100000-0xdc1fffff 64bit pref]
- [ 0.308793] pci 0000:11:00.0: [1106:3403] type 00 class 0x0c0010
- [ 0.308832] pci 0000:11:00.0: reg 10: [mem 0xfa810000-0xfa8107ff 64bit]
- [ 0.308852] pci 0000:11:00.0: reg 18: [io 0x7000-0x70ff]
- [ 0.309023] pci 0000:11:00.0: supports D2
- [ 0.309024] pci 0000:11:00.0: PME# supported from D2 D3hot D3cold
- [ 0.309089] pci 0000:11:00.1: [1106:0415] type 00 class 0x010185
- [ 0.309116] pci 0000:11:00.1: reg 10: [io 0x7140-0x7147]
- [ 0.309136] pci 0000:11:00.1: reg 14: [io 0x7130-0x7133]
- [ 0.309155] pci 0000:11:00.1: reg 18: [io 0x7120-0x7127]
- [ 0.309175] pci 0000:11:00.1: reg 1c: [io 0x7110-0x7113]
- [ 0.309194] pci 0000:11:00.1: reg 20: [io 0x7100-0x710f]
- [ 0.309233] pci 0000:11:00.1: reg 30: [mem 0xfa800000-0xfa80ffff pref]
- [ 0.309332] pci 0000:11:00.1: supports D2
- [ 0.309333] pci 0000:11:00.1: PME# supported from D2 D3hot D3cold
- [ 0.310519] pci 0000:09:09.0: PCI bridge to [bus 11-11]
- [ 0.310665] pci 0000:09:09.0: bridge window [io 0x7000-0x7fff]
- [ 0.310670] pci 0000:09:09.0: bridge window [mem 0xfa800000-0xfa8fffff]
- [ 0.310790] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 0.310843] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
- [ 0.310859] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
- [ 0.310874] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
- [ 0.310888] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
- [ 0.310902] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
- [ 0.310915] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT]
- [ 0.310930] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.BR21._PRT]
- [ 0.310978] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.BR21.BR31._PRT]
- [ 0.310994] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.BR21.BR34._PRT]
- [ 0.311009] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.BR21.BR35._PRT]
- [ 0.311024] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.BR21.BR36._PRT]
- [ 0.311041] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.BR21.BR37._PRT]
- [ 0.311056] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.BR21.BR38._PRT]
- [ 0.311077] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.BR21.BR39.BR41._PRT]
- [ 0.311091] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
- [ 0.311104] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
- [ 0.311168] pci0000:00: Requesting ACPI _OSC control (0x1d)
- [ 0.311408] pci0000:00: ACPI _OSC control (0x1c) granted
- [ 0.314933] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
- [ 0.315541] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
- [ 0.316146] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
- [ 0.316712] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
- [ 0.317278] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
- [ 0.317991] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
- [ 0.318702] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
- [ 0.319306] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
- [ 0.319945] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.320158] vgaarb: loaded
- [ 0.320276] vgaarb: bridge control possible 0000:02:00.0
- [ 0.320462] SCSI subsystem initialized
- [ 0.320643] libata version 3.00 loaded.
- [ 0.320685] usbcore: registered new interface driver usbfs
- [ 0.320826] usbcore: registered new interface driver hub
- [ 0.320971] usbcore: registered new device driver usb
- [ 0.321193] Advanced Linux Sound Architecture Driver Version 1.0.25.
- [ 0.321322] PCI: Using ACPI for IRQ routing
- [ 0.331017] PCI: pci_cache_line_size set to 64 bytes
- [ 0.331183] reserve RAM buffer: 000000000009a000 - 000000000009ffff
- [ 0.331184] reserve RAM buffer: 00000000bad6d000 - 00000000bbffffff
- [ 0.331186] reserve RAM buffer: 00000000badf3000 - 00000000bbffffff
- [ 0.331188] reserve RAM buffer: 00000000bb000000 - 00000000bbffffff
- [ 0.331189] reserve RAM buffer: 000000043fe00000 - 000000043fffffff
- [ 0.331311] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.331523] NetLabel: Initializing
- [ 0.331643] NetLabel: domain hash size = 128
- [ 0.331766] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.331897] NetLabel: unlabeled traffic allowed by default
- [ 0.332070] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
- [ 0.332539] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
- [ 0.334681] Switching to clocksource hpet
- [ 0.339282] pnp: PnP ACPI init
- [ 0.339406] ACPI: bus type pnp registered
- [ 0.339603] pnp 00:00: [bus 00-ff]
- [ 0.339604] pnp 00:00: [io 0x0cf8-0x0cff]
- [ 0.339606] pnp 00:00: [io 0x0000-0x03af window]
- [ 0.339607] pnp 00:00: [io 0x03e0-0x0cf7 window]
- [ 0.339608] pnp 00:00: [io 0x03b0-0x03df window]
- [ 0.339609] pnp 00:00: [io 0x0d00-0xffff window]
- [ 0.339610] pnp 00:00: [mem 0x000a0000-0x000bffff window]
- [ 0.339611] pnp 00:00: [mem 0x000c0000-0x000dffff window]
- [ 0.339613] pnp 00:00: [mem 0xbfa00000-0xffffffff window]
- [ 0.339614] pnp 00:00: [mem 0x00000000 window]
- [ 0.339664] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
- [ 0.339696] pnp 00:01: [mem 0xfed10000-0xfed19fff]
- [ 0.339697] pnp 00:01: [mem 0xe0000000-0xefffffff]
- [ 0.339698] pnp 00:01: [mem 0xfed90000-0xfed93fff]
- [ 0.339699] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
- [ 0.339700] pnp 00:01: [mem 0xfee00000-0xfee0ffff]
- [ 0.339750] system 00:01: [mem 0xfed10000-0xfed19fff] has been reserved
- [ 0.339891] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
- [ 0.340023] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
- [ 0.340153] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
- [ 0.340284] system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved
- [ 0.340415] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.340448] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
- [ 0.340449] pnp 00:02: [io 0x0290-0x029f]
- [ 0.340450] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
- [ 0.340496] system 00:02: [io 0x0290-0x029f] has been reserved
- [ 0.340625] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.340806] pnp 00:03: [dma 4]
- [ 0.340807] pnp 00:03: [io 0x0000-0x000f]
- [ 0.340808] pnp 00:03: [io 0x0081-0x0083]
- [ 0.340809] pnp 00:03: [io 0x0087]
- [ 0.340810] pnp 00:03: [io 0x0089-0x008b]
- [ 0.340811] pnp 00:03: [io 0x008f]
- [ 0.340812] pnp 00:03: [io 0x00c0-0x00df]
- [ 0.340860] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
- [ 0.340866] pnp 00:04: [io 0x0070-0x0071]
- [ 0.340872] pnp 00:04: [irq 8]
- [ 0.340903] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.340908] pnp 00:05: [io 0x0061]
- [ 0.340938] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
- [ 0.340952] pnp 00:06: [io 0x0010-0x001f]
- [ 0.340953] pnp 00:06: [io 0x0022-0x003f]
- [ 0.340954] pnp 00:06: [io 0x0044-0x005f]
- [ 0.340956] pnp 00:06: [io 0x0062-0x0063]
- [ 0.340957] pnp 00:06: [io 0x0065-0x006f]
- [ 0.340958] pnp 00:06: [io 0x0072-0x007f]
- [ 0.340958] pnp 00:06: [io 0x0080]
- [ 0.340959] pnp 00:06: [io 0x0084-0x0086]
- [ 0.340960] pnp 00:06: [io 0x0088]
- [ 0.340961] pnp 00:06: [io 0x008c-0x008e]
- [ 0.340962] pnp 00:06: [io 0x0090-0x009f]
- [ 0.340963] pnp 00:06: [io 0x00a2-0x00bf]
- [ 0.340964] pnp 00:06: [io 0x00e0-0x00ef]
- [ 0.340965] pnp 00:06: [io 0x04d0-0x04d1]
- [ 0.341017] system 00:06: [io 0x04d0-0x04d1] has been reserved
- [ 0.341146] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.341151] pnp 00:07: [io 0x00f0-0x00ff]
- [ 0.341155] pnp 00:07: [irq 13]
- [ 0.341189] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
- [ 0.341341] pnp 00:08: [io 0x03f8-0x03ff]
- [ 0.341345] pnp 00:08: [irq 4]
- [ 0.341346] pnp 00:08: [dma 0 disabled]
- [ 0.341400] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
- [ 0.341495] pnp 00:09: [io 0x0400-0x0453]
- [ 0.341496] pnp 00:09: [io 0x0458-0x047f]
- [ 0.341497] pnp 00:09: [io 0x1180-0x119f]
- [ 0.341498] pnp 00:09: [io 0x0500-0x057f]
- [ 0.341499] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
- [ 0.341500] pnp 00:09: [mem 0xfec00000-0xfecfffff]
- [ 0.341501] pnp 00:09: [mem 0xfed08000-0xfed08fff]
- [ 0.341502] pnp 00:09: [mem 0xff000000-0xffffffff]
- [ 0.341552] system 00:09: [io 0x0400-0x0453] has been reserved
- [ 0.341680] system 00:09: [io 0x0458-0x047f] has been reserved
- [ 0.341808] system 00:09: [io 0x1180-0x119f] has been reserved
- [ 0.341954] system 00:09: [io 0x0500-0x057f] has been reserved
- [ 0.342083] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
- [ 0.342214] system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved
- [ 0.342346] system 00:09: [mem 0xfed08000-0xfed08fff] has been reserved
- [ 0.342476] system 00:09: [mem 0xff000000-0xffffffff] has been reserved
- [ 0.342608] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.342629] pnp 00:0a: [io 0x0454-0x0457]
- [ 0.342673] system 00:0a: [io 0x0454-0x0457] has been reserved
- [ 0.342802] system 00:0a: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
- [ 0.342909] pnp 00:0b: [mem 0xfed00000-0xfed003ff]
- [ 0.342950] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
- [ 0.343037] pnp: PnP ACPI: found 12 devices
- [ 0.343160] ACPI: ACPI bus type pnp unregistered
- [ 0.348067] pci 0000:00:01.0: PCI bridge to [bus 01-01]
- [ 0.348197] pci 0000:00:01.1: PCI bridge to [bus 02-02]
- [ 0.348323] pci 0000:00:01.1: bridge window [io 0xe000-0xefff]
- [ 0.348452] pci 0000:00:01.1: bridge window [mem 0xf8000000-0xfa0fffff]
- [ 0.348585] pci 0000:00:01.1: bridge window [mem 0xd0000000-0xdbffffff 64bit pref]
- [ 0.348792] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
- [ 0.348953] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
- [ 0.349081] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
- [ 0.349215] pci 0000:00:1c.2: bridge window [mem 0xfb100000-0xfb1fffff]
- [ 0.349354] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
- [ 0.349481] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
- [ 0.349615] pci 0000:00:1c.4: bridge window [mem 0xfb000000-0xfb0fffff]
- [ 0.349754] pci 0000:00:1c.5: PCI bridge to [bus 06-06]
- [ 0.349900] pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
- [ 0.350032] pci 0000:00:1c.5: bridge window [mem 0xfaf00000-0xfaffffff]
- [ 0.350169] pci 0000:00:1c.6: PCI bridge to [bus 07-07]
- [ 0.350297] pci 0000:00:1c.6: bridge window [mem 0xfae00000-0xfaefffff]
- [ 0.350436] pci 0000:09:01.0: PCI bridge to [bus 0a-0a]
- [ 0.350569] pci 0000:09:01.0: bridge window [mem 0xfac00000-0xfacfffff]
- [ 0.350712] pci 0000:0b:00.0: PCI bridge to [bus 0c-0c]
- [ 0.350861] pci 0000:0b:00.0: bridge window [mem 0xfab00000-0xfabfffff]
- [ 0.351009] pci 0000:09:04.0: PCI bridge to [bus 0b-0c]
- [ 0.351142] pci 0000:09:04.0: bridge window [mem 0xfab00000-0xfabfffff]
- [ 0.351285] pci 0000:09:05.0: PCI bridge to [bus 0d-0d]
- [ 0.351417] pci 0000:09:05.0: bridge window [mem 0xfaa00000-0xfaafffff]
- [ 0.351560] pci 0000:09:06.0: PCI bridge to [bus 0e-0e]
- [ 0.351688] pci 0000:09:06.0: bridge window [io 0xa000-0xafff]
- [ 0.351843] pci 0000:09:06.0: bridge window [mem 0xdc200000-0xdc2fffff 64bit pref]
- [ 0.352059] pci 0000:09:07.0: PCI bridge to [bus 0f-0f]
- [ 0.352187] pci 0000:09:07.0: bridge window [io 0x9000-0x9fff]
- [ 0.352322] pci 0000:09:07.0: bridge window [mem 0xfa900000-0xfa9fffff]
- [ 0.352466] pci 0000:09:08.0: PCI bridge to [bus 10-10]
- [ 0.352594] pci 0000:09:08.0: bridge window [io 0x8000-0x8fff]
- [ 0.352734] pci 0000:09:08.0: bridge window [mem 0xdc100000-0xdc1fffff 64bit pref]
- [ 0.352959] pci 0000:09:09.0: PCI bridge to [bus 11-11]
- [ 0.353087] pci 0000:09:09.0: bridge window [io 0x7000-0x7fff]
- [ 0.353222] pci 0000:09:09.0: bridge window [mem 0xfa800000-0xfa8fffff]
- [ 0.353366] pci 0000:08:00.0: PCI bridge to [bus 09-11]
- [ 0.353494] pci 0000:08:00.0: bridge window [io 0x7000-0xafff]
- [ 0.353629] pci 0000:08:00.0: bridge window [mem 0xfa800000-0xfacfffff]
- [ 0.353764] pci 0000:08:00.0: bridge window [mem 0xdc100000-0xdc2fffff 64bit pref]
- [ 0.353999] pci 0000:00:1c.7: PCI bridge to [bus 08-11]
- [ 0.354127] pci 0000:00:1c.7: bridge window [io 0x7000-0xafff]
- [ 0.354260] pci 0000:00:1c.7: bridge window [mem 0xfa800000-0xfadfffff]
- [ 0.354394] pci 0000:00:1c.7: bridge window [mem 0xdc100000-0xdc2fffff 64bit pref]
- [ 0.354714] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
- [ 0.354715] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
- [ 0.354716] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
- [ 0.354717] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
- [ 0.354718] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
- [ 0.354720] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
- [ 0.354721] pci_bus 0000:00: resource 10 [mem 0xbfa00000-0xffffffff]
- [ 0.354722] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
- [ 0.354723] pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfa0fffff]
- [ 0.354725] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdbffffff 64bit pref]
- [ 0.354726] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
- [ 0.354727] pci_bus 0000:04: resource 1 [mem 0xfb100000-0xfb1fffff]
- [ 0.354728] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
- [ 0.354730] pci_bus 0000:05: resource 1 [mem 0xfb000000-0xfb0fffff]
- [ 0.354731] pci_bus 0000:06: resource 0 [io 0xb000-0xbfff]
- [ 0.354732] pci_bus 0000:06: resource 1 [mem 0xfaf00000-0xfaffffff]
- [ 0.354733] pci_bus 0000:07: resource 1 [mem 0xfae00000-0xfaefffff]
- [ 0.354735] pci_bus 0000:08: resource 0 [io 0x7000-0xafff]
- [ 0.354736] pci_bus 0000:08: resource 1 [mem 0xfa800000-0xfadfffff]
- [ 0.354737] pci_bus 0000:08: resource 2 [mem 0xdc100000-0xdc2fffff 64bit pref]
- [ 0.354738] pci_bus 0000:09: resource 0 [io 0x7000-0xafff]
- [ 0.354739] pci_bus 0000:09: resource 1 [mem 0xfa800000-0xfacfffff]
- [ 0.354741] pci_bus 0000:09: resource 2 [mem 0xdc100000-0xdc2fffff 64bit pref]
- [ 0.354742] pci_bus 0000:0a: resource 1 [mem 0xfac00000-0xfacfffff]
- [ 0.354743] pci_bus 0000:0b: resource 1 [mem 0xfab00000-0xfabfffff]
- [ 0.354744] pci_bus 0000:0c: resource 1 [mem 0xfab00000-0xfabfffff]
- [ 0.354746] pci_bus 0000:0d: resource 1 [mem 0xfaa00000-0xfaafffff]
- [ 0.354747] pci_bus 0000:0e: resource 0 [io 0xa000-0xafff]
- [ 0.354748] pci_bus 0000:0e: resource 2 [mem 0xdc200000-0xdc2fffff 64bit pref]
- [ 0.354749] pci_bus 0000:0f: resource 0 [io 0x9000-0x9fff]
- [ 0.354750] pci_bus 0000:0f: resource 1 [mem 0xfa900000-0xfa9fffff]
- [ 0.354752] pci_bus 0000:10: resource 0 [io 0x8000-0x8fff]
- [ 0.354753] pci_bus 0000:10: resource 2 [mem 0xdc100000-0xdc1fffff 64bit pref]
- [ 0.354754] pci_bus 0000:11: resource 0 [io 0x7000-0x7fff]
- [ 0.354755] pci_bus 0000:11: resource 1 [mem 0xfa800000-0xfa8fffff]
- [ 0.354773] NET: Registered protocol family 2
- [ 0.355099] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
- [ 0.355868] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
- [ 0.357000] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- [ 0.357244] TCP: Hash tables configured (established 524288 bind 65536)
- [ 0.357375] TCP: reno registered
- [ 0.357506] UDP hash table entries: 8192 (order: 6, 262144 bytes)
- [ 0.357677] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
- [ 0.357899] NET: Registered protocol family 1
- [ 0.358071] RPC: Registered named UNIX socket transport module.
- [ 0.358200] RPC: Registered udp transport module.
- [ 0.358324] RPC: Registered tcp transport module.
- [ 0.358448] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.358612] pci 0000:00:1a.0: EHCI: BIOS handoff
- [ 0.480811] pci 0000:00:1d.0: EHCI: BIOS handoff
- [ 0.602669] pci 0000:02:00.0: Boot video device
- [ 0.602908] PCI: CLS 64 bytes, default 64
- [ 0.602942] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
- [ 0.603073] Placing 64MB software IO TLB between ffff8800b6d6d000 - ffff8800bad6d000
- [ 0.603279] software IO TLB at phys 0xb6d6d000 - 0xbad6d000
- [ 0.604343] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x14
- [ 0.604476] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x14
- [ 0.604608] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x14
- [ 0.604747] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x14
- [ 0.604880] microcode: CPU4 sig=0x206a7, pf=0x2, revision=0x14
- [ 0.605013] microcode: CPU5 sig=0x206a7, pf=0x2, revision=0x14
- [ 0.605145] microcode: CPU6 sig=0x206a7, pf=0x2, revision=0x14
- [ 0.605277] microcode: CPU7 sig=0x206a7, pf=0x2, revision=0x14
- [ 0.605433] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
- [ 0.605809] audit: initializing netlink socket (disabled)
- [ 0.605941] type=2000 audit(1313461065.490:1): initialized
- [ 0.617149] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 0.619294] VFS: Disk quotas dquot_6.5.2
- [ 0.619460] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.619960] NFS: Registering the id_resolver key type
- [ 0.621706] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
- [ 0.622263] msgmni has been set to 31921
- [ 0.622438] SELinux: Registering netfilter hooks
- [ 0.622695] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 0.622901] io scheduler noop registered
- [ 0.623024] io scheduler deadline registered
- [ 0.623211] io scheduler cfq registered (default)
- [ 0.623417] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
- [ 0.623497] pcieport 0000:00:01.1: irq 41 for MSI/MSI-X
- [ 0.623630] pcieport 0000:00:1c.0: irq 42 for MSI/MSI-X
- [ 0.623775] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
- [ 0.623917] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
- [ 0.624057] pcieport 0000:00:1c.5: irq 45 for MSI/MSI-X
- [ 0.624197] pcieport 0000:00:1c.6: irq 46 for MSI/MSI-X
- [ 0.624339] pcieport 0000:00:1c.7: irq 47 for MSI/MSI-X
- [ 0.624519] pcieport 0000:08:00.0: irq 48 for MSI/MSI-X
- [ 0.624755] pcieport 0000:09:01.0: irq 49 for MSI/MSI-X
- [ 0.624984] pcieport 0000:09:04.0: irq 50 for MSI/MSI-X
- [ 0.625213] pcieport 0000:09:05.0: irq 51 for MSI/MSI-X
- [ 0.625438] pcieport 0000:09:06.0: irq 52 for MSI/MSI-X
- [ 0.625675] pcieport 0000:09:07.0: irq 53 for MSI/MSI-X
- [ 0.625900] pcieport 0000:09:08.0: irq 54 for MSI/MSI-X
- [ 0.626125] pcieport 0000:09:09.0: irq 55 for MSI/MSI-X
- [ 0.626308] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 0.626468] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.890570] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 0.911437] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 0.911809] Non-volatile memory driver v1.3
- [ 0.911933] Linux agpgart interface v0.103
- [ 0.912109] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
- [ 0.912332] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
- [ 0.913773] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
- [ 0.914002] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
- [ 0.914277] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
- [ 0.914494] ACPI: Power Button [PWRB]
- [ 0.914654] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
- [ 0.914861] ACPI: Power Button [PWRF]
- [ 0.915063] ACPI: Requesting acpi_cpufreq
- [ 0.915382] Monitor-Mwait will be used to enter C-3 state
- [ 0.915405] Monitor-Mwait will be used to enter C-3 state
- [ 0.915422] ACPI: acpi_idle registered with cpuidle
- [ 0.919983] brd: module loaded
- [ 0.920606] loop: module loaded
- [ 0.920857] ahci 0000:00:1f.2: version 3.0
- [ 0.920904] ahci 0000:00:1f.2: irq 56 for MSI/MSI-X
- [ 0.920928] ahci: SSS flag set, parallel bus scan disabled
- [ 0.931411] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
- [ 0.931631] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst
- [ 0.931844] ahci 0000:00:1f.2: setting latency timer to 64
- [ 0.941882] scsi0 : ahci
- [ 0.942073] scsi1 : ahci
- [ 0.942256] scsi2 : ahci
- [ 0.942448] scsi3 : ahci
- [ 0.942630] scsi4 : ahci
- [ 0.942811] scsi5 : ahci
- [ 0.943030] ata1: SATA max UDMA/133 abar m2048@0xfb205000 port 0xfb205100 irq 56
- [ 0.943237] ata2: SATA max UDMA/133 abar m2048@0xfb205000 port 0xfb205180 irq 56
- [ 0.943454] ata3: SATA max UDMA/133 abar m2048@0xfb205000 port 0xfb205200 irq 56
- [ 0.943660] ata4: SATA max UDMA/133 abar m2048@0xfb205000 port 0xfb205280 irq 56
- [ 0.943867] ata5: SATA max UDMA/133 abar m2048@0xfb205000 port 0xfb205300 irq 56
- [ 0.944074] ata6: SATA max UDMA/133 abar m2048@0xfb205000 port 0xfb205380 irq 56
- [ 0.944340] ahci 0000:04:00.0: irq 57 for MSI/MSI-X
- [ 0.944380] ahci: SSS flag set, parallel bus scan disabled
- [ 0.944554] ahci 0000:04:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
- [ 0.944762] ahci 0000:04:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
- [ 0.945216] scsi6 : ahci
- [ 0.945410] scsi7 : ahci
- [ 0.945581] ata7: SATA max UDMA/133 abar m512@0xfb110000 port 0xfb110100 irq 57
- [ 0.945790] ata8: SATA max UDMA/133 abar m512@0xfb110000 port 0xfb110180 irq 57
- [ 0.946060] ahci 0000:05:00.0: irq 58 for MSI/MSI-X
- [ 0.946091] ahci: SSS flag set, parallel bus scan disabled
- [ 0.946254] ahci 0000:05:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
- [ 0.946469] ahci 0000:05:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
- [ 0.946920] scsi8 : ahci
- [ 0.947107] scsi9 : ahci
- [ 0.947278] ata9: SATA max UDMA/133 abar m512@0xfb000000 port 0xfb000100 irq 58
- [ 0.947507] ata10: SATA max UDMA/133 abar m512@0xfb000000 port 0xfb000180 irq 58
- [ 0.947779] ahci 0000:06:00.0: irq 59 for MSI/MSI-X
- [ 0.947804] ahci: SSS flag set, parallel bus scan disabled
- [ 0.947966] ahci 0000:06:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
- [ 0.948175] ahci 0000:06:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
- [ 0.948634] scsi10 : ahci
- [ 0.948820] scsi11 : ahci
- [ 0.948992] ata11: SATA max UDMA/133 abar m512@0xfaf10000 port 0xfaf10100 irq 59
- [ 0.949200] ata12: SATA max UDMA/133 abar m512@0xfaf10000 port 0xfaf10180 irq 59
- [ 0.949499] ahci 0000:0f:00.0: irq 60 for MSI/MSI-X
- [ 0.949532] ahci: SSS flag set, parallel bus scan disabled
- [ 0.949702] ahci 0000:0f:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
- [ 0.949910] ahci 0000:0f:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
- [ 0.950376] scsi12 : ahci
- [ 0.950563] scsi13 : ahci
- [ 0.950735] ata13: SATA max UDMA/133 abar m512@0xfa900000 port 0xfa900100 irq 60
- [ 0.950943] ata14: SATA max UDMA/133 abar m512@0xfa900000 port 0xfa900180 irq 60
- [ 0.951271] pata_via 0000:11:00.1: version 0.3.4
- [ 0.951571] scsi14 : pata_via
- [ 0.951757] scsi15 : pata_via
- [ 0.951927] ata15: PATA max UDMA/133 cmd 0x7140 ctl 0x7130 bmdma 0x7100 irq 16
- [ 0.952132] ata16: PATA max UDMA/133 cmd 0x7120 ctl 0x7110 bmdma 0x7108 irq 16
- [ 0.952495] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
- [ 0.952765] r8169 0000:0e:00.0: irq 61 for MSI/MSI-X
- [ 0.952924] r8169 0000:0e:00.0: eth0: RTL8168evl/8111evl at 0xffffc900125c6000, bc:5f:f4:1c:04:1c, XID 0c900800 IRQ 61
- [ 0.953141] r8169 0000:0e:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
- [ 0.953373] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
- [ 0.953637] r8169 0000:10:00.0: irq 62 for MSI/MSI-X
- [ 0.953778] r8169 0000:10:00.0: eth1: RTL8168evl/8111evl at 0xffffc900125c8000, bc:5f:f4:1c:04:1e, XID 0c900800 IRQ 62
- [ 0.953994] r8169 0000:10:00.0: eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko]
- [ 0.954320] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.954461] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96
- [ 0.954482] ehci_hcd 0000:00:1a.0: setting latency timer to 64
- [ 0.954485] ehci_hcd 0000:00:1a.0: EHCI Host Controller
- [ 0.954623] drivers/usb/core/inode.c: creating file 'devices'
- [ 0.954625] drivers/usb/core/inode.c: creating file '001'
- [ 0.954656] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
- [ 0.954866] ehci_hcd 0000:00:1a.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2
- [ 0.954869] ehci_hcd 0000:00:1a.0: reset hcc_params 36881 caching frame 1024 64 bit addr
- [ 0.954878] ehci_hcd 0000:00:1a.0: support lpm
- [ 0.954890] ehci_hcd 0000:00:1a.0: debug port 2
- [ 0.955016] ehci_hcd 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
- [ 0.958903] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
- [ 0.958904] ehci_hcd 0000:00:1a.0: supports USB remote wakeup
- [ 0.958908] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfb207000
- [ 0.959039] ehci_hcd 0000:00:1a.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
- [ 0.964354] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
- [ 0.964506] usb usb1: default language 0x0409
- [ 0.964510] usb usb1: udev 1, busnum 1, minor = 0
- [ 0.964511] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.964643] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.964848] usb usb1: Product: EHCI Host Controller
- [ 0.964973] usb usb1: Manufacturer: Linux 3.4.9-gentoo ehci_hcd
- [ 0.965101] usb usb1: SerialNumber: 0000:00:1a.0
- [ 0.965269] usb usb1: usb_probe_device
- [ 0.965271] usb usb1: configuration #1 chosen from 1 choice
- [ 0.965275] usb usb1: adding 1-0:1.0 (config #1, interface 0)
- [ 0.965305] hub 1-0:1.0: usb_probe_interface
- [ 0.965306] hub 1-0:1.0: usb_probe_interface - got id
- [ 0.965308] hub 1-0:1.0: USB hub found
- [ 0.965447] hub 1-0:1.0: 2 ports detected
- [ 0.965571] hub 1-0:1.0: standalone hub
- [ 0.965572] hub 1-0:1.0: no power switching (usb 1.0)
- [ 0.965573] hub 1-0:1.0: individual port over-current protection
- [ 0.965574] hub 1-0:1.0: power on to power good time: 20ms
- [ 0.965576] hub 1-0:1.0: local power source is good
- [ 0.965577] hub 1-0:1.0: trying to enable port power on non-switchable hub
- [ 0.965589] drivers/usb/core/inode.c: creating file '001'
- [ 0.965621] ehci_hcd 0000:00:1d.0: setting latency timer to 64
- [ 0.965624] ehci_hcd 0000:00:1d.0: EHCI Host Controller
- [ 0.965752] drivers/usb/core/inode.c: creating file '002'
- [ 0.965784] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
- [ 0.965993] ehci_hcd 0000:00:1d.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2
- [ 0.965996] ehci_hcd 0000:00:1d.0: reset hcc_params 36881 caching frame 1024 64 bit addr
- [ 0.966004] ehci_hcd 0000:00:1d.0: support lpm
- [ 0.966015] ehci_hcd 0000:00:1d.0: debug port 2
- [ 0.966142] ehci_hcd 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
- [ 0.970032] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
- [ 0.970033] ehci_hcd 0000:00:1d.0: supports USB remote wakeup
- [ 0.970044] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfb206000
- [ 0.970175] ehci_hcd 0000:00:1d.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
- [ 0.975340] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
- [ 0.975488] usb usb2: default language 0x0409
- [ 0.975491] usb usb2: udev 1, busnum 2, minor = 128
- [ 0.975493] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.975624] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.975829] usb usb2: Product: EHCI Host Controller
- [ 0.975953] usb usb2: Manufacturer: Linux 3.4.9-gentoo ehci_hcd
- [ 0.976081] usb usb2: SerialNumber: 0000:00:1d.0
- [ 0.976246] usb usb2: usb_probe_device
- [ 0.976247] usb usb2: configuration #1 chosen from 1 choice
- [ 0.976250] usb usb2: adding 2-0:1.0 (config #1, interface 0)
- [ 0.976279] hub 2-0:1.0: usb_probe_interface
- [ 0.976280] hub 2-0:1.0: usb_probe_interface - got id
- [ 0.976281] hub 2-0:1.0: USB hub found
- [ 0.976420] hub 2-0:1.0: 2 ports detected
- [ 0.976543] hub 2-0:1.0: standalone hub
- [ 0.976544] hub 2-0:1.0: no power switching (usb 1.0)
- [ 0.976545] hub 2-0:1.0: individual port over-current protection
- [ 0.976546] hub 2-0:1.0: power on to power good time: 20ms
- [ 0.976548] hub 2-0:1.0: local power source is good
- [ 0.976549] hub 2-0:1.0: trying to enable port power on non-switchable hub
- [ 0.976561] drivers/usb/core/inode.c: creating file '001'
- [ 0.976602] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.976731] ohci_hcd: block sizes: ed 80 td 96
- [ 0.976759] uhci_hcd: USB Universal Host Controller Interface driver
- [ 0.976946] usbcore: registered new interface driver usblp
- [ 0.977073] Initializing USB Mass Storage driver...
- [ 0.977226] usbcore: registered new interface driver usb-storage
- [ 0.977366] USB Mass Storage support registered.
- [ 0.977519] usbcore: registered new interface driver libusual
- [ 0.977744] i8042: PNP: No PS/2 controller found. Probing ports directly.
- [ 0.980729] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 0.980856] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 0.981063] mousedev: PS/2 mouse device common for all mice
- [ 0.981338] rtc_cmos 00:04: RTC can wake from S4
- [ 0.981572] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
- [ 0.981727] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
- [ 0.981947] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
- [ 0.982139] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
- [ 0.982401] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
- [ 0.982596] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
- [ 0.982899] cpuidle: using governor ladder
- [ 0.983111] cpuidle: using governor menu
- [ 0.983233] EFI Variables Facility v0.08 2004-May-17
- [ 0.984284] usbcore: registered new interface driver usbhid
- [ 0.984440] usbhid: USB HID core driver
- [ 0.985085] snd_hda_intel 0000:00:1b.0: irq 63 for MSI/MSI-X
- [ 1.007243] hda_intel: Disabling MSI
- [ 1.065276] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
- [ 1.065283] hub 1-0:1.0: port 1: status 0501 change 0001
- [ 1.076276] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
- [ 1.076283] hub 2-0:1.0: port 1: status 0501 change 0001
- [ 1.165294] hub 1-0:1.0: state 7 ports 2 chg 0002 evt 0000
- [ 1.165300] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
- [ 1.216358] ehci_hcd 0000:00:1a.0: port 1 high speed
- [ 1.216361] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 1.248148] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 1.252150] ata9: SATA link down (SStatus 0 SControl 300)
- [ 1.254381] ata1.00: ATA-8: WDC WD30EZRX-00MMMB0, 80.00A80, max UDMA/133
- [ 1.254524] ata1.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- [ 1.255145] ata13: SATA link down (SStatus 0 SControl 300)
- [ 1.260384] ata1.00: configured for UDMA/133
- [ 1.260672] scsi 0:0:0:0: Direct-Access ATA WDC WD30EZRX-00M 80.0 PQ: 0 ANSI: 5
- [ 1.261287] sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
- [ 1.261521] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 1.261677] sd 0:0:0:0: [sda] 4096-byte physical blocks
- [ 1.261973] sd 0:0:0:0: [sda] Write Protect is off
- [ 1.263600] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 1.263691] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.267115] usb 1-1: new high-speed USB device number 2 using ehci_hcd
- [ 1.313639] sda: sda1
- [ 1.314175] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 1.318274] ehci_hcd 0000:00:1a.0: port 1 high speed
- [ 1.318277] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 1.326481] Netfilter messages via NETLINK v0.30.
- [ 1.326614] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- [ 1.326871] ctnetlink v0.93: registering with nfnetlink.
- [ 1.327078] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 1.327225] TCP: cubic registered
- [ 1.327346] Initializing XFRM netlink socket
- [ 1.327798] NET: Registered protocol family 10
- [ 1.328044] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 1.328191] IPv6 over IPv4 tunneling driver
- [ 1.328589] NET: Registered protocol family 17
- [ 1.328719] Registering the dns_resolver key type
- [ 1.329030] PM: Hibernation image not present or could not be loaded.
- [ 1.329048] registered taskstats version 1
- [ 1.330088] Magic number: 7:143:258
- [ 1.330262] console [netcon0] enabled
- [ 1.330384] netconsole: network logging started
- [ 1.331256] ALSA device list:
- [ 1.331375] #0: HDA Intel PCH at 0xfb200000 irq 63
- [ 1.331501] #1: HDA NVidia at 0xfa080000 irq 18
- [ 1.381142] ehci_hcd 0000:00:1a.0: set dev address 2 for port 1
- [ 1.381149] ehci_hcd 0000:00:1a.0: LPM: no device attached
- [ 1.381393] usb 1-1: udev 2, busnum 1, minor = 1
- [ 1.381398] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
- [ 1.381539] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 1.381853] usb 1-1: usb_probe_device
- [ 1.381855] usb 1-1: configuration #1 chosen from 1 choice
- [ 1.382036] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
- [ 1.382223] hub 1-1:1.0: usb_probe_interface
- [ 1.382225] hub 1-1:1.0: usb_probe_interface - got id
- [ 1.382226] hub 1-1:1.0: USB hub found
- [ 1.382522] hub 1-1:1.0: 6 ports detected
- [ 1.382657] hub 1-1:1.0: standalone hub
- [ 1.382658] hub 1-1:1.0: individual port power switching
- [ 1.382659] hub 1-1:1.0: individual port over-current protection
- [ 1.382660] hub 1-1:1.0: Single TT
- [ 1.382661] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns)
- [ 1.382662] hub 1-1:1.0: power on to power good time: 100ms
- [ 1.382897] hub 1-1:1.0: local power source is good
- [ 1.382902] hub 1-1:1.0: enabling power on all ports
- [ 1.383646] drivers/usb/core/inode.c: creating file '002'
- [ 1.383664] hub 2-0:1.0: state 7 ports 2 chg 0002 evt 0000
- [ 1.383672] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
- [ 1.405030] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 1.405813] ata7.00: HPA detected: current 625140335, native 625142448
- [ 1.406056] ata7.00: ATA-8: WDC WD3200AVVS-63L2B0, 01.03A01, max UDMA/133
- [ 1.406201] ata7.00: 625140335 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
- [ 1.407207] ata7.00: configured for UDMA/133
- [ 1.409031] ata11: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 1.412930] ata11.00: ATA-8: WDC WD20EADS-00S2B0, 01.00A01, max UDMA/133
- [ 1.413082] ata11.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
- [ 1.416185] ata11.00: configured for UDMA/133
- [ 1.434179] ehci_hcd 0000:00:1d.0: port 1 high speed
- [ 1.434182] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 1.483703] usb 1-1: link qh256-0001/ffff88042bd64200 start 1 [1/0 us]
- [ 1.484934] usb 2-1: new high-speed USB device number 2 using ehci_hcd
- [ 1.536222] ehci_hcd 0000:00:1d.0: port 1 high speed
- [ 1.536225] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 1.565888] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 1.571481] ata2.00: ATA-8: WDC WD30EZRX-00MMMB0, 80.00A80, max UDMA/133
- [ 1.571625] ata2.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- [ 1.577515] ata2.00: configured for UDMA/133
- [ 1.577791] scsi 1:0:0:0: Direct-Access ATA WDC WD30EZRX-00M 80.0 PQ: 0 ANSI: 5
- [ 1.578552] sd 1:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
- [ 1.578796] sd 1:0:0:0: [sdb] 4096-byte physical blocks
- [ 1.578878] sd 1:0:0:0: Attached scsi generic sg1 type 0
- [ 1.579143] sd 1:0:0:0: [sdb] Write Protect is off
- [ 1.579269] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
- [ 1.579277] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.598964] ehci_hcd 0000:00:1d.0: set dev address 2 for port 1
- [ 1.598971] ehci_hcd 0000:00:1d.0: LPM: no device attached
- [ 1.599225] usb 2-1: udev 2, busnum 2, minor = 129
- [ 1.599230] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
- [ 1.599372] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 1.599662] usb 2-1: usb_probe_device
- [ 1.599664] usb 2-1: configuration #1 chosen from 1 choice
- [ 1.599858] usb 2-1: adding 2-1:1.0 (config #1, interface 0)
- [ 1.600107] hub 2-1:1.0: usb_probe_interface
- [ 1.600110] hub 2-1:1.0: usb_probe_interface - got id
- [ 1.600111] hub 2-1:1.0: USB hub found
- [ 1.600338] hub 2-1:1.0: 8 ports detected
- [ 1.600473] hub 2-1:1.0: standalone hub
- [ 1.600474] hub 2-1:1.0: individual port power switching
- [ 1.600475] hub 2-1:1.0: individual port over-current protection
- [ 1.600476] hub 2-1:1.0: Single TT
- [ 1.600477] hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns)
- [ 1.600478] hub 2-1:1.0: power on to power good time: 100ms
- [ 1.600719] hub 2-1:1.0: local power source is good
- [ 1.600724] hub 2-1:1.0: enabling power on all ports
- [ 1.601719] drivers/usb/core/inode.c: creating file '002'
- [ 1.601737] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0000
- [ 1.603846] Refined TSC clocksource calibration: 3492.067 MHz.
- [ 1.603986] Switching to clocksource tsc
- [ 1.700878] hub 2-1:1.0: port 1: status 0101 change 0001
- [ 1.701252] hub 2-1:1.0: port 3: status 0101 change 0001
- [ 1.701516] hub 2-1:1.0: port 4: status 0101 change 0001
- [ 1.801681] usb 2-1: link qh256-0001/ffff88042bd64300 start 1 [1/0 us]
- [ 1.801753] hub 2-1:1.0: state 7 ports 8 chg 001a evt 0000
- [ 1.801934] hub 2-1:1.0: port 1, status 0101, change 0000, 12 Mb/s
- [ 1.812798] hub 2-1:1.0: port 1 not reset yet, waiting 10ms
- [ 1.874719] usb 2-1.1: new high-speed USB device number 3 using ehci_hcd
- [ 1.883623] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 1.885736] hub 2-1:1.0: port 1 not reset yet, waiting 10ms
- [ 1.890856] ata3.00: ATA-8: WDC WD30EZRX-00MMMB0, 80.00A80, max UDMA/133
- [ 1.890999] ata3.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- [ 1.897842] ata3.00: configured for UDMA/133
- [ 1.898096] scsi 2:0:0:0: Direct-Access ATA WDC WD30EZRX-00M 80.0 PQ: 0 ANSI: 5
- [ 1.898794] sd 2:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
- [ 1.898951] sd 2:0:0:0: Attached scsi generic sg2 type 0
- [ 1.899144] sd 2:0:0:0: [sdc] 4096-byte physical blocks
- [ 1.899381] sd 2:0:0:0: [sdc] Write Protect is off
- [ 1.899507] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
- [ 1.899630] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.960803] usb 2-1.1: default language 0x0409
- [ 1.961178] usb 2-1.1: udev 3, busnum 2, minor = 130
- [ 1.961182] usb 2-1.1: New USB device found, idVendor=05e3, idProduct=0608
- [ 1.961325] usb 2-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- [ 1.961534] usb 2-1.1: Product: USB2.0 Hub
- [ 1.961775] usb 2-1.1: usb_probe_device
- [ 1.961776] usb 2-1.1: configuration #1 chosen from 1 choice
- [ 1.962020] usb 2-1.1: adding 2-1.1:1.0 (config #1, interface 0)
- [ 1.962195] hub 2-1.1:1.0: usb_probe_interface
- [ 1.962197] hub 2-1.1:1.0: usb_probe_interface - got id
- [ 1.962198] hub 2-1.1:1.0: USB hub found
- [ 1.962658] hub 2-1.1:1.0: 4 ports detected
- [ 1.962792] hub 2-1.1:1.0: standalone hub
- [ 1.962793] hub 2-1.1:1.0: ganged power switching
- [ 1.962794] hub 2-1.1:1.0: global over-current protection
- [ 1.962794] hub 2-1.1:1.0: Single TT
- [ 1.962796] hub 2-1.1:1.0: TT requires at most 32 FS bit times (2664 ns)
- [ 1.962797] hub 2-1.1:1.0: Port indicators are supported
- [ 1.962798] hub 2-1.1:1.0: power on to power good time: 100ms
- [ 1.963260] hub 2-1.1:1.0: local power source is good
- [ 1.963263] hub 2-1.1:1.0: no over-current condition exists
- [ 1.963265] hub 2-1.1:1.0: enabling power on all ports
- [ 1.964548] drivers/usb/core/inode.c: creating file '003'
- [ 1.964645] hub 2-1:1.0: port 3, status 0101, change 0000, 12 Mb/s
- [ 1.975650] hub 2-1:1.0: port 3 not reset yet, waiting 10ms
- [ 2.037602] usb 2-1.3: new full-speed USB device number 4 using ehci_hcd
- [ 2.048571] hub 2-1:1.0: port 3 not reset yet, waiting 10ms
- [ 2.055303] sdb: sdb1
- [ 2.055667] sd 1:0:0:0: [sdb] Attached SCSI disk
- [ 2.064805] hub 2-1.1:1.0: port 1: status 0101 change 0001
- [ 2.065842] hub 2-1.1:1.0: port 3: status 0101 change 0001
- [ 2.066571] hub 2-1.1:1.0: port 4: status 0101 change 0001
- [ 2.122416] usb 2-1.3: ep0 maxpacket = 8
- [ 2.124900] usb 2-1.3: skipped 1 descriptor after interface
- [ 2.124905] usb 2-1.3: skipped 1 descriptor after interface
- [ 2.125271] usb 2-1.3: default language 0x0409
- [ 2.126670] usb 2-1.3: udev 4, busnum 2, minor = 131
- [ 2.126674] usb 2-1.3: New USB device found, idVendor=046d, idProduct=c318
- [ 2.126817] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 2.127022] usb 2-1.3: Product: Logitech Illuminated Keyboard
- [ 2.127149] usb 2-1.3: Manufacturer: Logitech
- [ 2.127404] usb 2-1.3: usb_probe_device
- [ 2.127405] usb 2-1.3: configuration #1 chosen from 1 choice
- [ 2.128269] usb 2-1.3: adding 2-1.3:1.0 (config #1, interface 0)
- [ 2.128443] usbhid 2-1.3:1.0: usb_probe_interface
- [ 2.128444] usbhid 2-1.3:1.0: usb_probe_interface - got id
- [ 2.129872] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input2
- [ 2.130102] usb 2-1.3: link qh8-0601/ffff88042bd64780 start 2 [1/2 us]
- [ 2.130248] generic-usb 0003:046D:C318.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1d.0-1.3/input0
- [ 2.130484] usb 2-1.3: adding 2-1.3:1.1 (config #1, interface 1)
- [ 2.130584] usbhid 2-1.3:1.1: usb_probe_interface
- [ 2.130585] usbhid 2-1.3:1.1: usb_probe_interface - got id
- [ 2.132694] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/input/input3
- [ 2.132917] usb 2-1.3: link qh8-0601/ffff88042bd64900 start 3 [1/2 us]
- [ 2.133090] usbhid 2-1.3:1.1: looking for a minor, starting at 96
- [ 2.133258] generic-usb 0003:046D:C318.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1d.0-1.3/input1
- [ 2.133568] drivers/usb/core/inode.c: creating file '004'
- [ 2.133766] hub 2-1:1.0: port 4, status 0101, change 0000, 12 Mb/s
- [ 2.144506] hub 2-1:1.0: port 4 not reset yet, waiting 10ms
- [ 2.166386] usb 2-1.1: link qh256-0001/ffff88042bd64a00 start 4 [1/0 us]
- [ 2.203367] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 2.204262] ata4.00: ATAPI: TSSTcorp CDDVDW SH-222BB, SB00, max UDMA/100
- [ 2.205218] ata4.00: configured for UDMA/100
- [ 2.206362] scsi 3:0:0:0: CD-ROM TSSTcorp CDDVDW SH-222BB SB00 PQ: 0 ANSI: 5
- [ 2.206615] usb 2-1.4: new full-speed USB device number 5 using ehci_hcd
- [ 2.210335] sr0: scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 2.210554] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 2.210949] sr 3:0:0:0: Attached scsi CD-ROM sr0
- [ 2.211158] sr 3:0:0:0: Attached scsi generic sg3 type 5
- [ 2.282794] usb 2-1.4: skipped 1 descriptor after interface
- [ 2.282799] usb 2-1.4: skipped 1 descriptor after interface
- [ 2.283165] usb 2-1.4: default language 0x0409
- [ 2.284293] usb 2-1.4: udev 5, busnum 2, minor = 132
- [ 2.284297] usb 2-1.4: New USB device found, idVendor=24ae, idProduct=2001
- [ 2.284440] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 2.284645] usb 2-1.4: Product: RAPOO 5G Wireless Device
- [ 2.284771] usb 2-1.4: Manufacturer: RAPOO
- [ 2.285036] usb 2-1.4: usb_probe_device
- [ 2.285038] usb 2-1.4: configuration #1 chosen from 1 choice
- [ 2.285301] usb 2-1.4: adding 2-1.4:1.0 (config #1, interface 0)
- [ 2.285474] usbhid 2-1.4:1.0: usb_probe_interface
- [ 2.285476] usbhid 2-1.4:1.0: usb_probe_interface - got id
- [ 2.286849] input: RAPOO RAPOO 5G Wireless Device as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input4
- [ 2.287079] usb 2-1.4: link qh8-0601/ffff88042bd64c80 start 5 [1/3 us]
- [ 2.287275] generic-usb 0003:24AE:2001.0003: input,hidraw2: USB HID v1.01 Keyboard [RAPOO RAPOO 5G Wireless Device] on usb-0000:00:1d.0-1.4/input0
- [ 2.287508] usb 2-1.4: adding 2-1.4:1.1 (config #1, interface 1)
- [ 2.287590] usbhid 2-1.4:1.1: usb_probe_interface
- [ 2.287591] usbhid 2-1.4:1.1: usb_probe_interface - got id
- [ 2.290322] input: RAPOO RAPOO 5G Wireless Device as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.1/input/input5
- [ 2.290545] usb 2-1.4: link qh8-0601/ffff88042bd64d80 start 6 [1/3 us]
- [ 2.290650] usbhid 2-1.4:1.1: looking for a minor, starting at 96
- [ 2.290786] generic-usb 0003:24AE:2001.0004: input,hiddev0,hidraw3: USB HID v1.01 Mouse [RAPOO RAPOO 5G Wireless Device] on usb-0000:00:1d.0-1.4/input1
- [ 2.291017] drivers/usb/core/inode.c: creating file '005'
- [ 2.291027] hub 2-1:1.0: state 7 ports 8 chg 0000 evt 0010
- [ 2.291125] hub 2-1.1:1.0: state 7 ports 4 chg 001a evt 0000
- [ 2.291511] hub 2-1.1:1.0: port 1, status 0101, change 0000, 12 Mb/s
- [ 2.302654] hub 2-1.1:1.0: port 1 not reset yet, waiting 10ms
- [ 2.364482] usb 2-1.1.1: new full-speed USB device number 6 using ehci_hcd
- [ 2.395284] sdc: sdc1 sdc2 sdc3 sdc4 sdc5
- [ 2.396171] sd 2:0:0:0: [sdc] Attached SCSI disk
- [ 2.439158] usb 2-1.1.1: ep0 maxpacket = 8
- [ 2.441290] usb 2-1.1.1: skipped 1 descriptor after interface
- [ 2.441536] usb 2-1.1.1: default language 0x0409
- [ 2.443015] usb 2-1.1.1: udev 6, busnum 2, minor = 133
- [ 2.443020] usb 2-1.1.1: New USB device found, idVendor=046d, idProduct=c21f
- [ 2.443166] usb 2-1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 2.443374] usb 2-1.1.1: Product: Wireless Gamepad F710
- [ 2.443499] usb 2-1.1.1: Manufacturer: Logitech
- [ 2.443622] usb 2-1.1.1: SerialNumber: D4E3962D
- [ 2.443867] usb 2-1.1.1: usb_probe_device
- [ 2.443868] usb 2-1.1.1: configuration #1 chosen from 1 choice
- [ 2.444145] usb 2-1.1.1: adding 2-1.1.1:1.0 (config #1, interface 0)
- [ 2.444311] drivers/usb/core/inode.c: creating file '006'
- [ 2.444624] hub 2-1.1:1.0: port 3, status 0101, change 0000, 12 Mb/s
- [ 2.507491] usb 2-1.1.3: new full-speed USB device number 7 using ehci_hcd
- [ 2.516115] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 2.521153] ata5.00: ATA-8: WDC WD30EZRX-00MMMB0, 80.00A80, max UDMA/133
- [ 2.521295] ata5.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- [ 2.526154] ata5.00: configured for UDMA/133
- [ 2.526411] scsi 4:0:0:0: Direct-Access ATA WDC WD30EZRX-00M 80.0 PQ: 0 ANSI: 5
- [ 2.527112] sd 4:0:0:0: [sdd] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
- [ 2.527211] sd 4:0:0:0: Attached scsi generic sg4 type 0
- [ 2.527474] sd 4:0:0:0: [sdd] 4096-byte physical blocks
- [ 2.527617] sd 4:0:0:0: [sdd] Write Protect is off
- [ 2.527743] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
- [ 2.527751] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 2.582046] usb 2-1.1.3: ep0 maxpacket = 8
- [ 2.584049] usb 2-1.1.3: skipped 1 descriptor after interface
- [ 2.584295] usb 2-1.1.3: default language 0x0409
- [ 2.585649] usb 2-1.1.3: udev 7, busnum 2, minor = 134
- [ 2.585653] usb 2-1.1.3: New USB device found, idVendor=046d, idProduct=c21f
- [ 2.585796] usb 2-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 2.586002] usb 2-1.1.3: Product: Wireless Gamepad F710
- [ 2.586131] usb 2-1.1.3: Manufacturer: Logitech
- [ 2.586255] usb 2-1.1.3: SerialNumber: CCA39209
- [ 2.586478] usb 2-1.1.3: usb_probe_device
- [ 2.586479] usb 2-1.1.3: configuration #1 chosen from 1 choice
- [ 2.586634] usb 2-1.1.3: adding 2-1.1.3:1.0 (config #1, interface 0)
- [ 2.586799] drivers/usb/core/inode.c: creating file '007'
- [ 2.587133] hub 2-1.1:1.0: port 4, status 0101, change 0000, 12 Mb/s
- [ 2.598394] hub 2-1.1:1.0: port 4 not reset yet, waiting 10ms
- [ 2.609401] hub 2-1.1:1.0: port 4 not reset yet, waiting 10ms
- [ 2.620393] hub 2-1.1:1.0: port 4 not reset yet, waiting 200ms
- [ 2.821238] hub 2-1.1:1.0: port 4 not reset yet, waiting 200ms
- [ 2.831959] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 2.844050] ata6.00: ATA-8: MKNSSDCR240GB, 332ABBF0, max UDMA/133
- [ 2.844192] ata6.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- [ 2.854027] ata6.00: configured for UDMA/133
- [ 2.854290] scsi 5:0:0:0: Direct-Access ATA MKNSSDCR240GB 332A PQ: 0 ANSI: 5
- [ 2.854849] sd 5:0:0:0: [sde] 468862128 512-byte logical blocks: (240 GB/223 GiB)
- [ 2.855046] sd 5:0:0:0: Attached scsi generic sg5 type 0
- [ 2.855216] scsi 6:0:0:0: Direct-Access ATA WDC WD3200AVVS-6 01.0 PQ: 0 ANSI: 5
- [ 2.855362] sd 5:0:0:0: [sde] Write Protect is off
- [ 2.855364] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
- [ 2.855428] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 2.856030] sd 6:0:0:0: [sdf] 625140335 512-byte logical blocks: (320 GB/298 GiB)
- [ 2.856169] sd 6:0:0:0: Attached scsi generic sg6 type 0
- [ 2.856466] sd 6:0:0:0: [sdf] Write Protect is off
- [ 2.856598] sd 6:0:0:0: [sdf] Mode Sense: 00 3a 00 00
- [ 2.856612] sd 6:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 2.856853] sde: sde1 sde2 sde3 sde4
- [ 2.857159] sd 5:0:0:0: [sde] Attached SCSI disk
- [ 2.891536] sdf: unknown partition table
- [ 2.892015] sd 6:0:0:0: [sdf] Attached SCSI disk
- [ 3.004503] sdd: sdd1
- [ 3.004984] sd 4:0:0:0: [sdd] Attached SCSI disk
- [ 3.022065] hub 2-1.1:1.0: port 4 not reset yet, waiting 200ms
- [ 3.022069] hub 2-1.1:1.0: port_wait_reset: err = -16
- [ 3.022072] hub 2-1.1:1.0: port 4 not enabled, trying reset again...
- [ 3.273868] usb 2-1.1.4: new full-speed USB device number 8 using ehci_hcd
- [ 3.315495] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 3.317286] ata8.00: HPA detected: current 625140335, native 625142448
- [ 3.317540] ata8.00: ATA-8: WDC WD3200AAJS-00L7A0, 01.03E01, max UDMA/133
- [ 3.317684] ata8.00: 625140335 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
- [ 3.320206] ata8.00: configured for UDMA/133
- [ 3.320438] scsi 7:0:0:0: Direct-Access ATA WDC WD3200AAJS-0 01.0 PQ: 0 ANSI: 5
- [ 3.321062] sd 7:0:0:0: [sdg] 625140335 512-byte logical blocks: (320 GB/298 GiB)
- [ 3.321276] sd 7:0:0:0: Attached scsi generic sg7 type 0
- [ 3.321292] sd 7:0:0:0: [sdg] Write Protect is off
- [ 3.321293] sd 7:0:0:0: [sdg] Mode Sense: 00 3a 00 00
- [ 3.321301] sd 7:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 3.348434] usb 2-1.1.4: ep0 maxpacket = 8
- [ 3.349901] usb 2-1.1.4: default language 0x0409
- [ 3.350277] usb 2-1.1.4: udev 8, busnum 2, minor = 135
- [ 3.350280] usb 2-1.1.4: New USB device found, idVendor=0a5c, idProduct=4500
- [ 3.350428] usb 2-1.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 3.350633] usb 2-1.1.4: Product: BCM2046B1
- [ 3.350755] usb 2-1.1.4: Manufacturer: Broadcom
- [ 3.350974] usb 2-1.1.4: usb_probe_device
- [ 3.350976] usb 2-1.1.4: configuration #1 chosen from 1 choice
- [ 3.351144] usb 2-1.1.4: adding 2-1.1.4:1.0 (config #1, interface 0)
- [ 3.351286] hub 2-1.1.4:1.0: usb_probe_interface
- [ 3.351288] hub 2-1.1.4:1.0: usb_probe_interface - got id
- [ 3.351289] hub 2-1.1.4:1.0: USB hub found
- [ 3.351509] hub 2-1.1.4:1.0: 3 ports detected
- [ 3.351642] hub 2-1.1.4:1.0: compound device; port removable status: FFF
- [ 3.351644] hub 2-1.1.4:1.0: ganged power switching
- [ 3.351644] hub 2-1.1.4:1.0: global over-current protection
- [ 3.351646] hub 2-1.1.4:1.0: power on to power good time: 100ms
- [ 3.351773] hub 2-1.1.4:1.0: hub controller current requirement: 100mA
- [ 3.351776] hub 2-1.1.4:1.0: 100mA bus power budget for each child
- [ 3.351883] hub 2-1.1.4:1.0: no over-current condition exists
- [ 3.351886] hub 2-1.1.4:1.0: enabling power on all ports
- [ 3.352423] drivers/usb/core/inode.c: creating file '008'
- [ 3.352445] hub 2-1.1:1.0: state 7 ports 4 chg 0000 evt 0010
- [ 3.352759] hub 2-1.1:1.0: port 4 enable change, status 00000103
- [ 3.380553] Alternate GPT is invalid, using primary GPT.
- [ 3.380698] sdg: sdg1
- [ 3.381247] sd 7:0:0:0: [sdg] Attached SCSI disk
- [ 3.451429] hub 2-1.1.4:1.0: port 1: status 0101 change 0001
- [ 3.451672] hub 2-1.1.4:1.0: port 2: status 0101 change 0001
- [ 3.451923] hub 2-1.1.4:1.0: port 3: status 0101 change 0001
- [ 3.551279] usb 2-1.1.4: link qh128-0601/ffff88042bd6a400 start 7 [1/2 us]
- [ 3.551351] hub 2-1.1.4:1.0: state 7 ports 3 chg 000e evt 0000
- [ 3.551520] hub 2-1.1.4:1.0: port 1, status 0101, change 0000, 12 Mb/s
- [ 3.562502] hub 2-1.1.4:1.0: port 1 not reset yet, waiting 10ms
- [ 3.624326] usb 2-1.1.4.1: new full-speed USB device number 9 using ehci_hcd
- [ 3.626229] ata10: SATA link down (SStatus 0 SControl 300)
- [ 3.626542] scsi 10:0:0:0: Direct-Access ATA WDC WD20EADS-00S 01.0 PQ: 0 ANSI: 5
- [ 3.627241] sd 10:0:0:0: [sdh] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
- [ 3.627404] sd 10:0:0:0: Attached scsi generic sg8 type 0
- [ 3.627733] sd 10:0:0:0: [sdh] Write Protect is off
- [ 3.627860] sd 10:0:0:0: [sdh] Mode Sense: 00 3a 00 00
- [ 3.627919] sd 10:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 3.635316] hub 2-1.1.4:1.0: port 1 not reset yet, waiting 10ms
- [ 3.680685] sdh: sdh1
- [ 3.681344] sd 10:0:0:0: [sdh] Attached SCSI disk
- [ 3.709140] usb 2-1.1.4.1: ep0 maxpacket = 8
- [ 3.712006] usb 2-1.1.4.1: skipped 1 descriptor after interface
- [ 3.712011] usb 2-1.1.4.1: udev 9, busnum 2, minor = 136
- [ 3.712014] usb 2-1.1.4.1: New USB device found, idVendor=0a5c, idProduct=4502
- [ 3.712234] usb 2-1.1.4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 3.712559] usb 2-1.1.4.1: usb_probe_device
- [ 3.712560] usb 2-1.1.4.1: configuration #1 chosen from 1 choice
- [ 3.712766] usb 2-1.1.4.1: adding 2-1.1.4.1:1.0 (config #1, interface 0)
- [ 3.712935] usbhid 2-1.1.4.1:1.0: usb_probe_interface
- [ 3.712938] usbhid 2-1.1.4.1:1.0: usb_probe_interface - got id
- [ 3.714325] input: HID 0a5c:4502 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.4/2-1.1.4.1/2-1.1.4.1:1.0/input/input6
- [ 3.714554] usb 2-1.1.4.1: link qh8-0601/ffff88042bd6a500 start 0 [1/2 us]
- [ 3.714772] generic-usb 0003:0A5C:4502.0005: input,hidraw4: USB HID v1.11 Keyboard [HID 0a5c:4502] on usb-0000:00:1d.0-1.1.4.1/input0
- [ 3.714999] drivers/usb/core/inode.c: creating file '009'
- [ 3.715006] hub 2-1.1.4:1.0: 398mA power budget left
- [ 3.715231] hub 2-1.1.4:1.0: port 2, status 0101, change 0000, 12 Mb/s
- [ 3.726370] hub 2-1.1.4:1.0: port 2 not reset yet, waiting 10ms
- [ 3.788193] usb 2-1.1.4.2: new full-speed USB device number 10 using ehci_hcd
- [ 3.799308] hub 2-1.1.4:1.0: port 2 not reset yet, waiting 10ms
- [ 3.873006] usb 2-1.1.4.2: ep0 maxpacket = 8
- [ 3.875748] usb 2-1.1.4.2: skipped 1 descriptor after interface
- [ 3.875753] usb 2-1.1.4.2: udev 10, busnum 2, minor = 137
- [ 3.875756] usb 2-1.1.4.2: New USB device found, idVendor=0a5c, idProduct=4503
- [ 3.875973] usb 2-1.1.4.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 3.876295] usb 2-1.1.4.2: usb_probe_device
- [ 3.876297] usb 2-1.1.4.2: configuration #1 chosen from 1 choice
- [ 3.876467] usb 2-1.1.4.2: adding 2-1.1.4.2:1.0 (config #1, interface 0)
- [ 3.876642] usbhid 2-1.1.4.2:1.0: usb_probe_interface
- [ 3.876644] usbhid 2-1.1.4.2:1.0: usb_probe_interface - got id
- [ 3.879076] input: HID 0a5c:4503 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.4/2-1.1.4.2/2-1.1.4.2:1.0/input/input7
- [ 3.879654] generic-usb 0003:0A5C:4503.0006: input,hidraw5: USB HID v1.11 Mouse [HID 0a5c:4503] on usb-0000:00:1d.0-1.1.4.2/input0
- [ 3.879882] drivers/usb/core/inode.c: creating file '010'
- [ 3.879889] hub 2-1.1.4:1.0: 396mA power budget left
- [ 3.880101] hub 2-1.1.4:1.0: port 3, status 0101, change 0000, 12 Mb/s
- [ 3.891236] hub 2-1.1.4:1.0: port 3 not reset yet, waiting 10ms
- [ 3.953057] usb 2-1.1.4.3: new full-speed USB device number 11 using ehci_hcd
- [ 3.964174] hub 2-1.1.4:1.0: port 3 not reset yet, waiting 10ms
- [ 4.040619] usb 2-1.1.4.3: skipped 1 descriptor after interface
- [ 4.040988] usb 2-1.1.4.3: default language 0x0409
- [ 4.042114] usb 2-1.1.4.3: udev 11, busnum 2, minor = 138
- [ 4.042119] usb 2-1.1.4.3: New USB device found, idVendor=0461, idProduct=4d75
- [ 4.042335] usb 2-1.1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 4.042541] usb 2-1.1.4.3: Product: Rocketfish Bluetooth Adapter
- [ 4.042669] usb 2-1.1.4.3: Manufacturer: Broadcom Corp
- [ 4.042793] usb 2-1.1.4.3: SerialNumber: 0002761A069B
- [ 4.043019] usb 2-1.1.4.3: usb_probe_device
- [ 4.043021] usb 2-1.1.4.3: configuration #1 chosen from 1 choice
- [ 4.043250] usb 2-1.1.4.3: adding 2-1.1.4.3:1.0 (config #1, interface 0)
- [ 4.043431] usb 2-1.1.4.3: adding 2-1.1.4.3:1.1 (config #1, interface 1)
- [ 4.043557] usb 2-1.1.4.3: adding 2-1.1.4.3:1.2 (config #1, interface 2)
- [ 4.043696] usb 2-1.1.4.3: adding 2-1.1.4.3:1.3 (config #1, interface 3)
- [ 4.043760] drivers/usb/core/inode.c: creating file '011'
- [ 4.043769] hub 2-1.1.4:1.0: 394mA power budget left
- [ 4.043770] hub 2-1.1.4:1.0: state 7 ports 3 chg 0000 evt 0008
- [ 4.086853] ata12: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 4.087757] ata12.00: ATA-8: ST2000DL003-9VT166, CC32, max UDMA/133
- [ 4.087902] ata12.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
- [ 4.088878] ata12.00: configured for UDMA/133
- [ 4.089138] scsi 11:0:0:0: Direct-Access ATA ST2000DL003-9VT1 CC32 PQ: 0 ANSI: 5
- [ 4.089819] sd 11:0:0:0: [sdi] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
- [ 4.089913] sd 11:0:0:0: Attached scsi generic sg9 type 0
- [ 4.090209] sd 11:0:0:0: [sdi] Write Protect is off
- [ 4.090336] sd 11:0:0:0: [sdi] Mode Sense: 00 3a 00 00
- [ 4.090344] sd 11:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 4.143888] sdi: sdi1
- [ 4.144189] sd 11:0:0:0: [sdi] Attached SCSI disk
- [ 4.394615] ata14: SATA link down (SStatus 0 SControl 300)
- [ 4.545637] md: Waiting for all devices to be available before autodetect
- [ 4.545770] md: If you don't use raid, use raid=noautodetect
- [ 4.546197] md: Autodetecting RAID arrays.
- [ 4.546321] md: Scanned 0 and added 0 devices.
- [ 4.546452] md: autorun ...
- [ 4.546572] md: ... autorun DONE.
- [ 4.580855] EXT4-fs (sde4): mounted filesystem with ordered data mode. Opts: (null)
- [ 4.581070] VFS: Mounted root (ext4 filesystem) readonly on device 8:68.
- [ 4.581822] Freeing unused kernel memory: 564k freed
- [ 4.581991] Write protecting the kernel read-only data: 12288k
- [ 4.584813] Freeing unused kernel memory: 1272k freed
- [ 4.589096] Freeing unused kernel memory: 2012k freed
- [ 4.633820] loadkeys used greatest stack depth: 5120 bytes left
- [ 4.634069] init-early.sh used greatest stack depth: 4792 bytes left
- [ 4.697508] cp used greatest stack depth: 4424 bytes left
- [ 4.856528] EXT4-fs (sde4): re-mounted. Opts: (null)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement