Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [root@papyrus ~]# cat /var/log/Xorg.0.log
- This is a pre-release version of the X server from The X.Org Foundation.
- It is not supported in any way.
- Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
- Select the "xorg" product for bugs you find in this release.
- Before reporting bugs in pre-release versions please check the
- latest version in the X.Org Foundation git repository.
- See http://wiki.x.org/wiki/GitPage for git access instructions.
- X.Org X Server 1.6.3.901 (1.6.4 RC 1)
- Release Date: 2009-8-25
- X Protocol Version 11, Revision 0
- Build Operating System: Linux 2.6.30-ARCH i686
- Current Operating System: Linux papyrus 2.6.30-ARCH #1 SMP PREEMPT Wed Sep 9 12:37:32 UTC 2009 i686
- Build Date: 04 September 2009 03:37:03PM
- Before reporting problems, check http://wiki.x.org
- to make sure that you have the latest version.
- Markers: (--) probed, (**) from config file, (==) default setting,
- (++) from command line, (!!) notice, (II) informational,
- (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
- (==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 9 22:23:28 2009
- (==) Using config file: "/etc/X11/xorg.conf"
- (==) ServerLayout "X.org Configured"
- (**) |-->Screen "Screen0" (0)
- (**) | |-->Monitor "Monitor0"
- (**) | |-->Device "Card0"
- (**) |-->Input Device "Mouse0"
- (**) |-->Input Device "Keyboard0"
- (==) Automatically adding devices
- (==) Automatically enabling devices
- (WW) The directory "/usr/share/fonts/TTF" does not exist.
- Entry deleted from font path.
- (WW) The directory "/usr/share/fonts/Type1" does not exist.
- Entry deleted from font path.
- (WW) The directory "/usr/share/fonts/TTF" does not exist.
- Entry deleted from font path.
- (WW) The directory "/usr/share/fonts/Type1" does not exist.
- Entry deleted from font path.
- (**) FontPath set to:
- /usr/share/fonts/misc,
- /usr/share/fonts/100dpi:unscaled,
- /usr/share/fonts/75dpi:unscaled,
- /usr/share/fonts/misc,
- /usr/share/fonts/100dpi:unscaled,
- /usr/share/fonts/75dpi:unscaled,
- built-ins
- (**) ModulePath set to "/usr/lib/xorg/modules"
- (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
- (WW) Disabling Mouse0
- (WW) Disabling Keyboard0
- (II) Loader magic: 0xec0
- (II) Module ABI versions:
- X.Org ANSI C Emulation: 0.4
- X.Org Video Driver: 5.0
- X.Org XInput driver : 4.0
- X.Org Server Extension : 2.0
- (II) Loader running on linux
- (++) using VT number 7
- (--) PCI:*(0:0:2:0) 8086:8108:1043:8398 Intel Corporation System Controller Hub (SCH Poulsbo) Graphics Controller rev 7, Mem @ 0xf3f80000/524288, 0xd0000000/268435456, 0xf3f40000/262144, I/O @ 0x0000c880/8
- (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
- (II) No APM support in BIOS or kernel
- (II) System resource ranges:
- [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
- [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
- [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
- [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
- [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
- [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
- (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
- (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
- (II) "glx" will be loaded by default.
- (II) "record" will be loaded. This was enabled by default and also specified in the config file.
- (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
- (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
- (II) LoadModule: "dri"
- (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
- (II) Module dri: vendor="X.Org Foundation"
- compiled for 1.6.3.901, module version = 1.0.0
- ABI class: X.Org Server Extension, version 2.0
- (II) Loading extension XFree86-DRI
- (II) LoadModule: "dbe"
- (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
- (II) Module dbe: vendor="X.Org Foundation"
- compiled for 1.6.3.901, module version = 1.0.0
- Module class: X.Org Server Extension
- ABI class: X.Org Server Extension, version 2.0
- (II) Loading extension DOUBLE-BUFFER
- (II) LoadModule: "record"
- (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
- (II) Module record: vendor="X.Org Foundation"
- compiled for 1.6.3.901, module version = 1.13.0
- Module class: X.Org Server Extension
- ABI class: X.Org Server Extension, version 2.0
- (II) Loading extension RECORD
- (II) LoadModule: "extmod"
- (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
- (II) Module extmod: vendor="X.Org Foundation"
- compiled for 1.6.3.901, module version = 1.0.0
- Module class: X.Org Server Extension
- ABI class: X.Org Server Extension, version 2.0
- (II) Loading extension MIT-SCREEN-SAVER
- (II) Loading extension XFree86-VidModeExtension
- (II) Loading extension XFree86-DGA
- (II) Loading extension DPMS
- (II) Loading extension XVideo
- (II) Loading extension XVideo-MotionCompensation
- (II) Loading extension X-Resource
- (II) LoadModule: "dri2"
- (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
- (II) Module dri2: vendor="X.Org Foundation"
- compiled for 1.6.3.901, module version = 1.1.0
- ABI class: X.Org Server Extension, version 2.0
- (II) Loading extension DRI2
- (II) LoadModule: "glx"
- (WW) Warning, couldn't open module glx
- (II) UnloadModule: "glx"
- (EE) Failed to load module "glx" (module does not exist, 0)
- (II) LoadModule: "psb"
- (II) Loading /usr/lib/xorg/modules/drivers//psb_drv.so
- (II) Module psb: vendor="X.Org Foundation"
- compiled for 1.6.3, module version = 0.29.0
- Module class: X.Org Video Driver
- ABI class: X.Org Video Driver, version 5.0
- (II) Debug: psbSetup
- (II) PSB: driver for Intel GMA500 chipsets: Intel GMA500
- (II) Primary Device is: PCI 00@00:02:0
- (WW) Falling back to old probe method for psb
- (II) Debug: psbProbe
- (--) Chipset Intel GMA500 found
- (II) resource ranges after xf86ClaimFixedResources() call:
- [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
- [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
- [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
- [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
- [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
- [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
- (II) PSB(0): Debug: Allocating new device
- (II) resource ranges after probing:
- [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
- [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
- [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
- [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
- [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
- [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
- [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
- [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
- [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
- [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
- [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
- (II) PSB(0): Debug: psbPreInit
- (II) PSB(0): psb_drv - 2.2.0.32L.0027
- (II) Loading sub module "vbe"
- (II) LoadModule: "vbe"
- (II) Loading /usr/lib/xorg/modules//libvbe.so
- (II) Module vbe: vendor="X.Org Foundation"
- compiled for 1.6.3.901, module version = 1.1.0
- ABI class: X.Org Video Driver, version 5.0
- (==) PSB(0): Depth 24, (--) framebuffer bpp 32
- (II) Loading sub module "fb"
- (II) LoadModule: "fb"
- (II) Loading /usr/lib/xorg/modules//libfb.so
- (II) Module fb: vendor="X.Org Foundation"
- compiled for 1.6.3.901, module version = 1.0.0
- ABI class: X.Org ANSI C Emulation, version 0.4
- (--) PSB(0): Linear framebuffer at 0x0
- (==) PSB(0): RGB weight 888
- (==) PSB(0): Default visual is TrueColor
- (**) PSB(0): Option "IgnoreACPI" "true"
- (==) PSB(0): Use hardware cursor.
- (**) PSB(0): Not using ACPI for LVDS detection.
- (II) Loading sub module "dri"
- (II) LoadModule: "dri"
- (II) Reloading /usr/lib/xorg/modules/extensions//libdri.so
- (II) PSB(0): Debug: psbPreinitXpsb
- (II) Loading sub module "Xpsb"
- (II) LoadModule: "Xpsb"
- (II) Loading /usr/lib/xorg/modules/drivers//Xpsb.so
- (II) Module Xpsb: vendor="Tungsten Graphics Inc."
- compiled for 1.6.0, module version = 0.1.0
- (II) PSB(0): Debug: psbDeviceScreenInit
- (II) PSB(0): Debug: Initializing device
- (II) Loading sub module "vgahw"
- (II) LoadModule: "vgahw"
- (II) Loading /usr/lib/xorg/modules//libvgahw.so
- (II) Module vgahw: vendor="X.Org Foundation"
- compiled for 1.6.3.901, module version = 0.1.0
- ABI class: X.Org Video Driver, version 5.0
- (II) PSB(0): Debug: MMIO virtual address is 0xb79de000
- (--) PSB(0): Mapped PCI MMIO at physical address 0xf3f80000
- with size 512 kiB
- (EE) PSB(0): the stolenBase is:0x3f800000
- (--) PSB(0): Detected 7932 kiB of "stolen" memory set aside as video RAM.
- (EE) PSB(0): screnIndex is:0;fbPhys is:0x3f800000; fbsize is:0x007bf000
- (--) PSB(0): Mapped graphics aperture at physical address 0x3f800000
- with size 7 MiB
- (II) PSB(0): Debug: DRM device init
- (II) PSB(0): Poulsbo MemClock 533, CoreClock 200
- (II) PSB(0): Poulsbo Latencies 324 744 210 450
- (II) PSB(0): sku_value is 0x00800000, sku_bSDVOEnable is 1, sku_bMaxResEnableInt is 0
- (II) PSB(0): Debug: psbInitOutputs
- (II) PSB(0): Debug: psbLVDSInit
- (II) PSB(0): Output LVDS0 using monitor section Monitor0
- (II) Debug: i830_psbOutputInit
- (II) PSB(0): I2C bus "LVDSBLC_B" initialized.
- (II) PSB(0): I2C bus "LVDSDDC_C" initialized.
- (II) PSB(0): I2C device "LVDSBLC_B:BLC Control" registered at address 0x58.
- (II) PSB(0): Debug: i830_psbDDCGetModes
- (II) PSB(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
- (II) PSB(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
- (II) PSB(0): EDID vendor "CMO", prod id 777
- (II) PSB(0): Printing DDC gathered Modelines:
- (II) PSB(0): Modeline "1024x600"x0.0 45.00 1024 1077 1112 1200 600 603 609 625 -hsync -vsync (37.5 kHz)
- (II) PSB(0): EDID vendor "CMO", prod id 777
- (II) Loading sub module "int10"
- (II) LoadModule: "int10"
- (II) Loading /usr/lib/xorg/modules//libint10.so
- (II) Module int10: vendor="X.Org Foundation"
- compiled for 1.6.3.901, module version = 1.0.0
- ABI class: X.Org Video Driver, version 5.0
- (II) PSB(0): initializing int10
- (II) PSB(0): Bad V_BIOS checksum
- (II) PSB(0): Primary V_BIOS segment is: 0xc000
- (II) PSB(0): VESA BIOS detected
- (II) PSB(0): VESA VBE Version 3.0
- (II) PSB(0): VESA VBE Total Mem: 7872 kB
- (II) PSB(0): VESA VBE OEM: Intel(r)Poulsbo Graphics Chip Accelerated VGA BIOS
- (II) PSB(0): VESA VBE OEM Software Rev: 1.0
- (II) PSB(0): VESA VBE OEM Vendor: Intel Corporation
- (II) PSB(0): VESA VBE OEM Product: Intel(r)Poulsbo Graphics Controller
- (II) PSB(0): VESA VBE OEM Product Rev: Hardware Version 0.0
- (II) PSB(0): Found panel mode in BIOS VBT tables:
- (II) PSB(0): Modeline "1024x600"x0.0 50.00 1024 1044 1054 1344 600 602 605 625 (37.2 kHz)
- (II) PSB(0): BLC Data in BIOS VBT tables: datasize=0 paneltype=0 type=0x02 pol=0x00 freq=0x00c8 minlevel=0x00 i2caddr=0x58 cmd=0xaa
- (WW) PSB(0): BIOS panel mode data doesn't match probed data, continuing with probed.
- (II) PSB(0): BIOS mode:
- (II) PSB(0): Modeline "1024x600"x0.0 50.00 1024 1044 1054 1344 600 602 605 625 (37.2 kHz)
- (II) PSB(0): probed mode:
- (II) PSB(0): Modeline "1024x600"x0.0 45.00 1024 1077 1112 1200 600 603 609 625 -hsync -vsync (37.5 kHz)
- (II) PSB(0): Lid state timer is enabled!
- (II) Debug: i830_psbPtrAddToList
- (II) PSB(0): Debug: i830_psbSDVOInit
- (II) PSB(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
- (II) PSB(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
- (II) PSB(0): I2C bus "SDVOB DDC Bus" initialized.
- (II) PSB(0): Debug: SDVO: W: 02 (i830_SDVO_CMD_GET_DEVICE_CAPS)
- (II) PSB(0): SDVO: R: 02 42 02 01 01 3D 3E 00 (Success)
- (II) PSB(0): Debug: sdvo_get_capabilities, caps.output_flags=3e
- (II) PSB(0): Debug: SDVO: W: 0B (i830_SDVO_CMD_GET_ATTACHED_DISPLAYS)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Success)
- (II) PSB(0): Debug: SDVO: W: 0B (i830_SDVO_CMD_GET_ATTACHED_DISPLAYS)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Success)
- (II) PSB(0): Debug: SDVO: W: 0B (i830_SDVO_CMD_GET_ATTACHED_DISPLAYS)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Success)
- (II) PSB(0): Output SDVO-1 has no monitor section
- (II) PSB(0): Debug: SDVO: W: 05 00 00 (i830_SDVO_CMD_SET_ACTIVE_OUTPUTS)
- (II) PSB(0): SDVO: R: (Success)
- (II) PSB(0): Debug: SDVO: W: 10 00 (i830_SDVO_CMD_SET_TARGET_INPUT)
- (II) PSB(0): SDVO: R: (Success)
- (II) PSB(0): Debug: SDVO: W: 1D (i830_SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE)
- (II) PSB(0): SDVO: R: C4 09 74 40 (Success)
- (II) PSB(0): SDVO device VID/DID: 02:42.02, clock range 25.0MHz - 165.0MHz, input 1: Y, input 2: N, output 1: Y, output 2: N
- (II) Debug: i830_psbPtrAddToList
- (II) Debug: i830_psbOutputCompat
- (II) PSB(0): Debug: i830_psbOutputTypesToIndex
- (II) PSB(0): Debug: Output crtc mask is 0x00000002, compat mask is 0x00000001
- (II) PSB(0): Debug: i830_psbOutputTypesToIndex
- (II) PSB(0): Debug: Output crtc mask is 0x00000001, compat mask is 0x00000002
- (II) PSB(0): Debug: xxi830_psbInitCrtcs
- (II) PSB(0): Debug: xxi830_psbCrtcInit
- (II) PSB(0): Debug: xxi830_psbCrtcInit
- (II) Debug: i830_psbOutputEnableCrtcForAllScreens
- (II) Debug: Marking crtc 0 as available for all screens.
- (II) Debug: i830_psbOutputEnableCrtcForAllScreens
- (II) Debug: Marking crtc 1 as available for all screens.
- (II) PSB(0): Debug: psbDeviceFinishInit
- (II) Debug: Really running psbDeviceFinishInit
- (++) PSB(0): i830_psbSaveHWState
- (II) PSB(0): Debug: xxi830_psbOutputSave
- (II) PSB(0): Debug: psbLVDSSave
- (II) PSB(0): Debug: xxi830_sdvo_save
- (II) PSB(0): Debug: SDVO: W: 20 (i830_SDVO_CMD_GET_CLOCK_RATE_MULT)
- (II) PSB(0): SDVO: R: 01 (Success)
- (II) PSB(0): Current clock rate multiplier: 1
- (II) PSB(0): Debug: SDVO: W: 04 (i830_SDVO_CMD_GET_ACTIVE_OUTPUTS)
- (II) PSB(0): SDVO: R: 00 00 (Success)
- (II) PSB(0): Debug: --save_active_outputs is 0
- (II) PSB(0): Debug: SDVO: W: 10 00 (i830_SDVO_CMD_SET_TARGET_INPUT)
- (II) PSB(0): SDVO: R: (Success)
- (II) PSB(0): Debug: SDVO: W: 12 (i830_SDVO_CMD_GET_INPUT_TIMINGS_PART1)
- (II) PSB(0): SDVO: R: 00 00 00 00 00 00 00 00 (Success)
- (II) PSB(0): Debug: SDVO: W: 13 (i830_SDVO_CMD_GET_INPUT_TIMINGS_PART2)
- (II) PSB(0): SDVO: R: 00 00 00 00 16 20 00 00 (Success)
- (II) PSB(0): Debug: SDVO: W: 11 00 00 (i830_SDVO_CMD_SET_TARGET_OUTPUT)
- (II) PSB(0): SDVO: R: (Invalid arg)
- (II) PSB(0): Debug: SDVO: W: 18 (i830_SDVO_CMD_GET_OUTPUT_TIMINGS_PART1)
- (II) PSB(0): SDVO: R: 00 00 00 00 00 00 00 00 (Target not specified)
- (II) PSB(0): Debug: SDVO: W: 06 00 13 C1 AB (i830_SDVO_CMD_GET_IN_OUT_MAP)
- (II) PSB(0): SDVO: R: (Success)
- (II) PSB(0): Debug: xxi830_psbCrtcSave pipe 0.
- (II) PSB(0): Debug: xxi830_psbCrtcSave pipe 1.
- (==) PSB(0): Shadow framebuffer disabled
- (II) Loading sub module "exa"
- (II) LoadModule: "exa"
- (II) Loading /usr/lib/xorg/modules//libexa.so
- (II) Module exa: vendor="X.Org Foundation"
- compiled for 1.6.3.901, module version = 2.4.0
- ABI class: X.Org Video Driver, version 5.0
- (==) PSB(0): Acceleration enabled
- (==) PSB(0): [EXA] Allocate 32768 kiB for EXA pixmap cache.
- (==) PSB(0): [EXA] Allocate 4 kiB for scratch memory.
- (II) Debug: i830_psbOutputAssignToScreen
- (II) PSB(0): Output "SDVO-1" is assigned to this screen.
- (II) Debug: i830_psbOutputAssignToScreen
- (II) PSB(0): Output "LVDS0" is assigned to this screen.
- (II) PSB(0): Searching for matching Poulsbo mode(s):
- (II) PSB(0): Debug: psbLVDSDetect 1
- (II) PSB(0): Debug: psbGetLidStatus lidState= 0
- (II) PSB(0): Debug: psbLVDSGetModes
- (II) PSB(0): EDID vendor "CMO", prod id 777
- (II) PSB(0): Printing DDC gathered Modelines:
- (II) PSB(0): Modeline "1024x600"x0.0 45.00 1024 1077 1112 1200 600 603 609 625 -hsync -vsync (37.5 kHz)
- (II) PSB(0): EDID vendor "CMO", prod id 777
- (II) PSB(0): Debug: psbLVDSModeValid
- (II) PSB(0): Debug: xxi830_sdvo_detect 1
- (II) PSB(0): Debug: SDVO: W: 0E (i830_SDVO_CMD_GET_ACTIVE_HOT_PLUG)
- (II) PSB(0): SDVO: R: 00 00 (Not supported)
- (II) PSB(0): Debug: SDVO: W: 0D 01 00 (i830_SDVO_CMD_SET_ACTIVE_HOT_PLUG)
- (II) PSB(0): Debug: SDVO: W: 0E (i830_SDVO_CMD_GET_ACTIVE_HOT_PLUG)
- (II) PSB(0): Debug: xxi830_sdvo_dpms 0, active_outputs=0
- (II) PSB(0): Debug: SDVO: W: 03 (i830_SDVO_CMD_GET_TRAINED_INPUTS)
- (II) PSB(0): SDVO: R: 00 (Success)
- (EE) PSB(0): First SDVO output reported failure to sync or input is not trainded!!!
- (II) PSB(0): Debug: SDVO: W: 05 00 00 (i830_SDVO_CMD_SET_ACTIVE_OUTPUTS)
- (II) PSB(0): SDVO: R: (Success)
- (II) PSB(0): Debug: SDVO: W: 02 (i830_SDVO_CMD_GET_DEVICE_CAPS)
- (II) PSB(0): SDVO: R: 02 42 02 01 01 3D 3E 00 (Success)
- (II) PSB(0): Debug: SDVO: W: 0B (i830_SDVO_CMD_GET_ATTACHED_DISPLAYS)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Success)
- (II) PSB(0): Debug: SDVO: W: 0B (i830_SDVO_CMD_GET_ATTACHED_DISPLAYS)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Success)
- (II) PSB(0): Debug: SDVO: W: 0B (i830_SDVO_CMD_GET_ATTACHED_DISPLAYS)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Success)
- (II) PSB(0): Debug: SDVO: W: 0B (i830_SDVO_CMD_GET_ATTACHED_DISPLAYS)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Success)
- (II) PSB(0): Debug: SDVO: W: 0B (i830_SDVO_CMD_GET_ATTACHED_DISPLAYS)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Pending)
- (II) PSB(0): SDVO: R: 00 00 (Success)
- (II) PSB(0): Debug: xxi830_sdvo_dpms 3, active_outputs=0
- (II) PSB(0): Debug: SDVO: W: 05 00 00 (i830_SDVO_CMD_SET_ACTIVE_OUTPUTS)
- (II) PSB(0): SDVO: R: (Success)
- (II) PSB(0): Output LVDS0 connected
- (II) PSB(0): Output SDVO-1 disconnected
- (II) PSB(0): Using user preference for initial modes
- (II) PSB(0): Output LVDS0 using initial mode 1024x600
- (II) Debug: i830_psbOutputEnableCrtcForAllScreens
- (II) Debug: Marking crtc 0 as available for all screens.
- (II) Debug: i830_psbOutputDisableCrtcForOtherScreens
- (II) Debug: Grabbing crtc 1 for screen 0
- (==) PSB(0): Using gamma correction (1.0, 1.0, 1.0)
- (**) PSB(0): Display dimensions: (210, 120) mm
- (**) PSB(0): DPI set to (123, 126)
- (--) Depth 24 pixmap format is 32 bpp
- (II) do I need RAC? No, I don't.
- (II) resource ranges after preInit:
- [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
- [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
- [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
- [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
- [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
- [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
- [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
- [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
- [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
- [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
- [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
- (II) PSB(0): Debug: psbScreenInit
- (II) PSB(0): Debug: psbDRIScreenInit
- (II) PSB(0): Debug: SAREA size is 8192
- drmOpenDevice: node name is /dev/dri/card0
- drmOpenDevice: open result is 9, (OK)
- drmOpenDevice: node name is /dev/dri/card0
- drmOpenDevice: open result is 9, (OK)
- drmOpenByBusid: Searching for BusID PCI:0:2:0
- drmOpenDevice: node name is /dev/dri/card0
- drmOpenDevice: open result is 9, (OK)
- drmOpenByBusid: drmOpenMinor returns 9
- drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
- (II) [drm] DRM interface version 1.3
- (II) [drm] DRM open master succeeded.
- (II) PSB(0): [drm] Using the DRM lock SAREA also for drawables.
- (II) PSB(0): [drm] framebuffer handle = 0x3f800000
- (II) PSB(0): [drm] added 1 reserved context for kernel
- (II) PSB(0): X context handle = 0x1
- (II) PSB(0): [drm] installed DRM signal handler
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement