Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] BIOS EBDA/lowmem at: 0009f000/0009f000
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 2.6.28-15-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #49-Ubuntu SMP Tue Aug 18 18:40:08 UTC 2009 (Ubuntu 2.6.28-15.49-generic)
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] Intel GenuineIntel
- [ 0.000000] AMD AuthenticAMD
- [ 0.000000] NSC Geode by NSC
- [ 0.000000] Cyrix CyrixInstead
- [ 0.000000] Centaur CentaurHauls
- [ 0.000000] Transmeta GenuineTMx86
- [ 0.000000] Transmeta TransmetaCPU
- [ 0.000000] UMC UMC UMC UMC
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
- [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
- [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
- [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfef0000 (usable)
- [ 0.000000] BIOS-e820: 00000000bfef0000 - 00000000bfef3000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 00000000bfef3000 - 00000000bff00000 (ACPI data)
- [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f2000000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
- [ 0.000000] DMI 2.4 present.
- [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
- [ 0.000000] last_pfn = 0xbfef0 max_arch_pfn = 0x100000
- [ 0.000000] Scanning 0 areas for low memory corruption
- [ 0.000000] modified physical RAM map:
- [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
- [ 0.000000] modified: 0000000000010000 - 000000000009f000 (usable)
- [ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved)
- [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
- [ 0.000000] modified: 0000000000100000 - 00000000bfef0000 (usable)
- [ 0.000000] modified: 00000000bfef0000 - 00000000bfef3000 (ACPI NVS)
- [ 0.000000] modified: 00000000bfef3000 - 00000000bff00000 (ACPI data)
- [ 0.000000] modified: 00000000f0000000 - 00000000f2000000 (reserved)
- [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
- [ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
- [ 0.000000] RAMDISK: 3783d000 - 37fef60b
- [ 0.000000] Allocated new RAMDISK: 0087d000 - 0102f60b
- [ 0.000000] Move RAMDISK from 000000003783d000 - 0000000037fef60a to 0087d000 - 0102f60a
- [ 0.000000] ACPI: RSDP 000F7780, 0024 (r2 Nvidia)
- [ 0.000000] ACPI: XSDT BFEF30C0, 0044 (r1 Nvidia ASUSACPI 42302E31 AWRD 0)
- [ 0.000000] ACPI: FACP BFEF9740, 00F4 (r3 Nvidia ASUSACPI 42302E31 AWRD 0)
- [ 0.000000] FADT: X_PM1a_EVT_BLK.bit_width (8) does not match PM1_EVT_LEN (4)
- [ 0.000000] ACPI: DSDT BFEF3240, 64AC (r1 NVIDIA ASUSACPI 1000 MSFT 3000000)
- [ 0.000000] ACPI: FACS BFEF0000, 0040
- [ 0.000000] ACPI: HPET BFEF9980, 0038 (r1 Nvidia ASUSACPI 42302E31 AWRD 98)
- [ 0.000000] ACPI: MCFG BFEF9A00, 003C (r1 Nvidia ASUSACPI 42302E31 AWRD 0)
- [ 0.000000] ACPI: APIC BFEF9880, 0098 (r1 Nvidia ASUSACPI 42302E31 AWRD 0)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] 2186MB HIGHMEM available.
- [ 0.000000] 883MB LOWMEM available.
- [ 0.000000] mapped low ram: 0 - 373fe000
- [ 0.000000] low ram: 00000000 - 373fe000
- [ 0.000000] bootmap 00012000 - 00018e80
- [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
- [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
- [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
- [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
- [ 0.000000] #3 [0000100000 - 00008780ac] TEXT DATA BSS ==> [0000100000 - 00008780ac]
- [ 0.000000] #4 [0000879000 - 000087d000] INIT_PG_TABLE ==> [0000879000 - 000087d000]
- [ 0.000000] #5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
- [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
- [ 0.000000] #7 [000087d000 - 000102f60b] NEW RAMDISK ==> [000087d000 - 000102f60b]
- [ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
- [ 0.000000] found SMP MP-table at [c00f5c40] 000f5c40
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0x00000010 -> 0x00001000
- [ 0.000000] Normal 0x00001000 -> 0x000373fe
- [ 0.000000] HighMem 0x000373fe -> 0x000bfef0
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[2] active PFN ranges
- [ 0.000000] 0: 0x00000010 -> 0x0000009f
- [ 0.000000] 0: 0x00000100 -> 0x000bfef0
- [ 0.000000] On node 0 totalpages: 786047
- [ 0.000000] free_area_init_node: node 0, pgdat c06cb500, node_mem_map c1030200
- [ 0.000000] DMA zone: 32 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 3951 pages, LIFO batch:0
- [ 0.000000] Normal zone: 1736 pages used for memmap
- [ 0.000000] Normal zone: 220470 pages, LIFO batch:31
- [ 0.000000] HighMem zone: 4374 pages used for memmap
- [ 0.000000] HighMem zone: 555484 pages, LIFO batch:31
- [ 0.000000] Movable zone: 0 pages used for memmap
- [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
- [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] ACPI: IRQ14 used by override.
- [ 0.000000] ACPI: IRQ15 used by override.
- [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
- [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
- [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
- [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
- [ 0.000000] Allocating PCI resources starting at c0000000 (gap: bff00000:30100000)
- [ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data
- [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 779905
- [ 0.000000] Kernel command line: root=/dev/md0 ro quiet splash
- [ 0.000000] Enabling fast FPU save and restore... done.
- [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
- [ 0.000000] Initializing CPU#0
- [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
- [ 0.000000] Extended CMOS year: 2000
- [ 0.000000] Fast TSC calibration using PIT
- [ 0.000000] Detected 2133.307 MHz processor.
- [ 0.004000] spurious 8259A interrupt: IRQ7.
- [ 0.004000] Console: colour VGA+ 80x25
- [ 0.004000] console [tty0] enabled
- [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.004000] allocated 15722880 bytes of page_cgroup
- [ 0.004000] please try cgroup_disable=memory option if you don't want
- [ 0.004000] Scanning for low memory corruption every 60 seconds
- [ 0.004000] Memory: 3086728k/3144640k available (4115k kernel code, 56544k reserved, 2199k data, 532k init, 2239432k highmem)
- [ 0.004000] virtual kernel memory layout:
- [ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
- [ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
- [ 0.004000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
- [ 0.004000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
- [ 0.004000] .init : 0xc0733000 - 0xc07b8000 ( 532 kB)
- [ 0.004000] .data : 0xc0504f5f - 0xc072ae60 (2199 kB)
- [ 0.004000] .text : 0xc0100000 - 0xc0504f5f (4115 kB)
- [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
- [ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.004000] hpet clockevent registered
- [ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
- [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4266.61 BogoMIPS (lpj=8533228)
- [ 0.004000] Security Framework initialized
- [ 0.004000] SELinux: Disabled at boot.
- [ 0.004000] AppArmor: AppArmor initialized
- [ 0.004000] Mount-cache hash table entries: 512
- [ 0.004000] Initializing cgroup subsys ns
- [ 0.004000] Initializing cgroup subsys cpuacct
- [ 0.004000] Initializing cgroup subsys memory
- [ 0.004000] Initializing cgroup subsys freezer
- [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
- [ 0.004000] CPU: L2 cache: 4096K
- [ 0.004000] CPU: Physical Processor ID: 0
- [ 0.004000] CPU: Processor Core ID: 0
- [ 0.004000] using mwait in idle threads.
- [ 0.004000] Checking 'hlt' instruction... OK.
- [ 0.018777] ACPI: Core revision 20080926
- [ 0.020174] ACPI: Checking initramfs for custom DSDT
- [ 0.412540] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.453544] CPU0: Intel(R) Core(TM)2 CPU 6420 @ 2.13GHz stepping 06
- [ 0.456001] Booting processor 1 APIC 0x1 ip 0x6000
- [ 0.004000] Initializing CPU#1
- [ 0.004000] Calibrating delay using timer specific routine.. 4266.70 BogoMIPS (lpj=8533410)
- [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
- [ 0.004000] CPU: L2 cache: 4096K
- [ 0.004000] CPU: Physical Processor ID: 0
- [ 0.004000] CPU: Processor Core ID: 1
- [ 0.540756] CPU1: Intel(R) Core(TM)2 CPU 6420 @ 2.13GHz stepping 06
- [ 0.540774] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
- [ 0.544039] Brought up 2 CPUs
- [ 0.544042] Total of 2 processors activated (8533.31 BogoMIPS).
- [ 0.544121] CPU0 attaching sched-domain:
- [ 0.544125] domain 0: span 0-1 level MC
- [ 0.544128] groups: 0 1
- [ 0.544135] CPU1 attaching sched-domain:
- [ 0.544138] domain 0: span 0-1 level MC
- [ 0.544140] groups: 1 0
- [ 0.544219] net_namespace: 776 bytes
- [ 0.544219] Booting paravirtualized kernel on bare hardware
- [ 0.544379] Time: 5:11:07 Date: 09/23/09
- [ 0.544379] regulator: core version 0.5
- [ 0.544379] NET: Registered protocol family 16
- [ 0.544379] EISA bus registered
- [ 0.544379] ACPI: bus type pci registered
- [ 0.544379] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 31
- [ 0.544379] PCI: MCFG area at f0000000 reserved in E820
- [ 0.544379] PCI: Using MMCONFIG for extended config space
- [ 0.544379] PCI: Using configuration type 1 for base access
- [ 0.548744] ACPI: EC: Look up EC in DSDT
- [ 0.559855] ACPI: Interpreter enabled
- [ 0.559863] ACPI: (supports S0 S1 S3 S4 S5)
- [ 0.559893] ACPI: Using IOAPIC for interrupt routing
- [ 0.571365] ACPI: No dock devices found.
- [ 0.571380] ACPI: PCI Root Bridge [PCI0] (0000:00)
- [ 0.572338] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.572342] pci 0000:00:03.0: PME# disabled
- [ 0.572392] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.572396] pci 0000:00:07.0: PME# disabled
- [ 0.572653] pci 0000:00:0a.1: reg 20 io port: [0x1c00-0x1c3f]
- [ 0.572660] pci 0000:00:0a.1: reg 24 io port: [0x1c80-0x1cbf]
- [ 0.572677] pci 0000:00:0a.1: PME# supported from D3hot D3cold
- [ 0.572684] pci 0000:00:0a.1: PME# disabled
- [ 0.572770] pci 0000:00:0b.0: reg 10 32bit mmio: [0xfe02f000-0xfe02ffff]
- [ 0.572804] pci 0000:00:0b.0: supports D1 D2
- [ 0.572806] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.572811] pci 0000:00:0b.0: PME# disabled
- [ 0.572846] pci 0000:00:0b.1: reg 10 32bit mmio: [0xfe02e000-0xfe02e0ff]
- [ 0.572880] pci 0000:00:0b.1: supports D1 D2
- [ 0.572882] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.572887] pci 0000:00:0b.1: PME# disabled
- [ 0.572940] pci 0000:00:0d.0: reg 20 io port: [0xfd00-0xfd0f]
- [ 0.572994] pci 0000:00:0e.0: reg 10 io port: [0x9f0-0x9f7]
- [ 0.573000] pci 0000:00:0e.0: reg 14 io port: [0xbf0-0xbf3]
- [ 0.573006] pci 0000:00:0e.0: reg 18 io port: [0x970-0x977]
- [ 0.573013] pci 0000:00:0e.0: reg 1c io port: [0xb70-0xb73]
- [ 0.573019] pci 0000:00:0e.0: reg 20 io port: [0xf800-0xf80f]
- [ 0.573026] pci 0000:00:0e.0: reg 24 32bit mmio: [0xfe02d000-0xfe02dfff]
- [ 0.573080] pci 0000:00:0f.0: reg 10 io port: [0x9e0-0x9e7]
- [ 0.573086] pci 0000:00:0f.0: reg 14 io port: [0xbe0-0xbe3]
- [ 0.573092] pci 0000:00:0f.0: reg 18 io port: [0x960-0x967]
- [ 0.573098] pci 0000:00:0f.0: reg 1c io port: [0xb60-0xb63]
- [ 0.573105] pci 0000:00:0f.0: reg 20 io port: [0xf300-0xf30f]
- [ 0.573111] pci 0000:00:0f.0: reg 24 32bit mmio: [0xfe02c000-0xfe02cfff]
- [ 0.573211] pci 0000:00:10.1: reg 10 32bit mmio: [0xfe024000-0xfe027fff]
- [ 0.573244] pci 0000:00:10.1: PME# supported from D3hot D3cold
- [ 0.573249] pci 0000:00:10.1: PME# disabled
- [ 0.573293] pci 0000:00:14.0: reg 10 32bit mmio: [0xfe02b000-0xfe02bfff]
- [ 0.573300] pci 0000:00:14.0: reg 14 io port: [0xf200-0xf207]
- [ 0.573327] pci 0000:00:14.0: supports D1 D2
- [ 0.573330] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.573334] pci 0000:00:14.0: PME# disabled
- [ 0.573384] pci 0000:01:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
- [ 0.573395] pci 0000:01:00.0: reg 14 64bit mmio: [0xe0000000-0xefffffff]
- [ 0.573405] pci 0000:01:00.0: reg 1c 64bit mmio: [0xfb000000-0xfbffffff]
- [ 0.573412] pci 0000:01:00.0: reg 24 io port: [0xef00-0xef7f]
- [ 0.573419] pci 0000:01:00.0: reg 30 32bit mmio: [0xfcfe0000-0xfcffffff]
- [ 0.573482] pci 0000:00:03.0: bridge io port: [0xe000-0xefff]
- [ 0.573486] pci 0000:00:03.0: bridge 32bit mmio: [0xfa000000-0xfcffffff]
- [ 0.573492] pci 0000:00:03.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff]
- [ 0.573542] pci 0000:02:00.0: reg 10 io port: [0xcf00-0xcf07]
- [ 0.573551] pci 0000:02:00.0: reg 14 io port: [0xce00-0xce03]
- [ 0.573560] pci 0000:02:00.0: reg 18 io port: [0xcd00-0xcd07]
- [ 0.573569] pci 0000:02:00.0: reg 1c io port: [0xcc00-0xcc03]
- [ 0.573577] pci 0000:02:00.0: reg 20 io port: [0xcb00-0xcb0f]
- [ 0.573586] pci 0000:02:00.0: reg 24 32bit mmio: [0xfddfe000-0xfddfffff]
- [ 0.573605] pci 0000:02:00.0: PME# supported from D3hot
- [ 0.573611] pci 0000:02:00.0: PME# disabled
- [ 0.573668] pci 0000:00:07.0: bridge io port: [0xc000-0xcfff]
- [ 0.573673] pci 0000:00:07.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff]
- [ 0.573678] pci 0000:00:07.0: bridge 64bit mmio pref: [0xfdc00000-0xfdcfffff]
- [ 0.573725] pci 0000:03:08.0: reg 10 32bit mmio: [0xfdfff000-0xfdfff7ff]
- [ 0.573733] pci 0000:03:08.0: reg 14 io port: [0xdf00-0xdf7f]
- [ 0.573770] pci 0000:03:08.0: supports D2
- [ 0.573772] pci 0000:03:08.0: PME# supported from D2 D3hot D3cold
- [ 0.573777] pci 0000:03:08.0: PME# disabled
- [ 0.573815] pci 0000:00:10.0: transparent bridge
- [ 0.573819] pci 0000:00:10.0: bridge io port: [0xd000-0xdfff]
- [ 0.573824] pci 0000:00:10.0: bridge 32bit mmio: [0xfdf00000-0xfdffffff]
- [ 0.573828] pci 0000:00:10.0: bridge 32bit mmio pref: [0xfde00000-0xfdefffff]
- [ 0.573842] bus 00 -> node 0
- [ 0.573851] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 0.574386] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
- [ 0.672064] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
- [ 0.672293] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
- [ 0.672518] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
- [ 0.672751] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
- [ 0.672979] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 *10 11 14 15)
- [ 0.673205] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 *11 14 15)
- [ 0.673428] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
- [ 0.673652] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
- [ 0.673876] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
- [ 0.674319] ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
- [ 0.674545] ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15)
- [ 0.674773] ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
- [ 0.675002] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)
- [ 0.675225] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
- [ 0.675449] ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
- [ 0.675673] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
- [ 0.675896] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
- [ 0.676126] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
- [ 0.676353] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15)
- [ 0.676581] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15)
- [ 0.676855] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
- [ 0.677119] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
- [ 0.677382] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
- [ 0.677645] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
- [ 0.677908] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0
- [ 0.678170] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
- [ 0.678432] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
- [ 0.678694] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
- [ 0.678958] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
- [ 0.679223] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
- [ 0.679487] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
- [ 0.679752] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
- [ 0.680021] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
- [ 0.680287] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
- [ 0.680551] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
- [ 0.680817] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
- [ 0.681083] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
- [ 0.681348] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
- [ 0.681615] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
- [ 0.681882] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
- [ 0.682152] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
- [ 0.682329] ACPI: WMI: Mapper loaded
- [ 0.682372] SCSI subsystem initialized
- [ 0.682372] libata version 3.00 loaded.
- [ 0.682372] usbcore: registered new interface driver usbfs
- [ 0.682372] usbcore: registered new interface driver hub
- [ 0.682372] usbcore: registered new device driver usb
- [ 0.682372] PCI: Using ACPI for IRQ routing
- [ 0.688011] Bluetooth: Core ver 2.13
- [ 0.688028] NET: Registered protocol family 31
- [ 0.688028] Bluetooth: HCI device and connection manager initialized
- [ 0.688028] Bluetooth: HCI socket layer initialized
- [ 0.688028] NET: Registered protocol family 8
- [ 0.688029] NET: Registered protocol family 20
- [ 0.688042] NetLabel: Initializing
- [ 0.688044] NetLabel: domain hash size = 128
- [ 0.688046] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.688060] NetLabel: unlabeled traffic allowed by default
- [ 0.688078] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
- [ 0.688084] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
- [ 0.692063] AppArmor: AppArmor Filesystem Enabled
- [ 0.696010] Switched to high resolution mode on CPU 0
- [ 0.696812] Switched to high resolution mode on CPU 1
- [ 0.700008] pnp: PnP ACPI init
- [ 0.700017] ACPI: bus type pnp registered
- [ 0.705812] pnp: PnP ACPI: found 12 devices
- [ 0.705815] ACPI: ACPI bus type pnp unregistered
- [ 0.705820] PnPBIOS: Disabled by ACPI PNP
- [ 0.705830] system 00:01: ioport range 0x1000-0x107f has been reserved
- [ 0.705833] system 00:01: ioport range 0x1080-0x10ff has been reserved
- [ 0.705836] system 00:01: ioport range 0x1400-0x147f has been reserved
- [ 0.705840] system 00:01: ioport range 0x1480-0x14ff has been reserved
- [ 0.705843] system 00:01: ioport range 0x1800-0x187f has been reserved
- [ 0.705846] system 00:01: ioport range 0x1880-0x18ff has been reserved
- [ 0.705853] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
- [ 0.705856] system 00:02: ioport range 0x800-0x87f has been reserved
- [ 0.705859] system 00:02: ioport range 0x290-0x297 has been reserved
- [ 0.705862] system 00:02: ioport range 0x880-0x88f has been reserved
- [ 0.705873] system 00:0a: iomem range 0xf0000000-0xf1ffffff has been reserved
- [ 0.705880] system 00:0b: iomem range 0xda000-0xdbfff has been reserved
- [ 0.705884] system 00:0b: iomem range 0xf0000-0xf7fff could not be reserved
- [ 0.705887] system 00:0b: iomem range 0xf8000-0xfbfff could not be reserved
- [ 0.705890] system 00:0b: iomem range 0xfc000-0xfffff could not be reserved
- [ 0.705894] system 00:0b: iomem range 0xfeff0000-0xfeff00ff has been reserved
- [ 0.705897] system 00:0b: iomem range 0xbfef0000-0xbfefffff could not be reserved
- [ 0.705900] system 00:0b: iomem range 0xffff0000-0xffffffff has been reserved
- [ 0.705904] system 00:0b: iomem range 0x0-0x9ffff could not be reserved
- [ 0.705907] system 00:0b: iomem range 0x100000-0xbfeeffff could not be reserved
- [ 0.705911] system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
- [ 0.706132] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
- [ 0.706135] system 00:0b: iomem range 0xfeff0000-0xfeff03ff could not be reserved
- [ 0.740892] pci 0000:00:03.0: PCI bridge, secondary bus 0000:01
- [ 0.740896] pci 0000:00:03.0: IO window: 0xe000-0xefff
- [ 0.740900] pci 0000:00:03.0: MEM window: 0xfa000000-0xfcffffff
- [ 0.740905] pci 0000:00:03.0: PREFETCH window: 0x000000e0000000-0x000000efffffff
- [ 0.740911] pci 0000:00:07.0: PCI bridge, secondary bus 0000:02
- [ 0.740914] pci 0000:00:07.0: IO window: 0xc000-0xcfff
- [ 0.740918] pci 0000:00:07.0: MEM window: 0xfdd00000-0xfddfffff
- [ 0.740922] pci 0000:00:07.0: PREFETCH window: 0x000000fdc00000-0x000000fdcfffff
- [ 0.740928] pci 0000:00:10.0: PCI bridge, secondary bus 0000:03
- [ 0.740932] pci 0000:00:10.0: IO window: 0xd000-0xdfff
- [ 0.740937] pci 0000:00:10.0: MEM window: 0xfdf00000-0xfdffffff
- [ 0.740941] pci 0000:00:10.0: PREFETCH window: 0x000000fde00000-0x000000fdefffff
- [ 0.740954] pci 0000:00:03.0: setting latency timer to 64
- [ 0.740962] pci 0000:00:07.0: setting latency timer to 64
- [ 0.740968] pci 0000:00:10.0: setting latency timer to 64
- [ 0.740972] bus: 00 index 0 io port: [0x00-0xffff]
- [ 0.740975] bus: 00 index 1 mmio: [0x000000-0xffffffff]
- [ 0.740978] bus: 01 index 0 io port: [0xe000-0xefff]
- [ 0.740981] bus: 01 index 1 mmio: [0xfa000000-0xfcffffff]
- [ 0.740983] bus: 01 index 2 mmio: [0xe0000000-0xefffffff]
- [ 0.740986] bus: 01 index 3 mmio: [0x0-0x0]
- [ 0.740989] bus: 02 index 0 io port: [0xc000-0xcfff]
- [ 0.740991] bus: 02 index 1 mmio: [0xfdd00000-0xfddfffff]
- [ 0.740994] bus: 02 index 2 mmio: [0xfdc00000-0xfdcfffff]
- [ 0.740996] bus: 02 index 3 mmio: [0x0-0x0]
- [ 0.740999] bus: 03 index 0 io port: [0xd000-0xdfff]
- [ 0.741001] bus: 03 index 1 mmio: [0xfdf00000-0xfdffffff]
- [ 0.741004] bus: 03 index 2 mmio: [0xfde00000-0xfdefffff]
- [ 0.741007] bus: 03 index 3 io port: [0x00-0xffff]
- [ 0.741009] bus: 03 index 4 mmio: [0x000000-0xffffffff]
- [ 0.741018] NET: Registered protocol family 2
- [ 0.756062] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.756329] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.756641] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.756827] TCP: Hash tables configured (established 131072 bind 65536)
- [ 0.756829] TCP reno registered
- [ 0.764081] NET: Registered protocol family 1
- [ 0.764212] checking if image is initramfs... it is
- [ 1.561410] Freeing initrd memory: 7881k freed
- [ 1.561663] cpufreq: No nForce2 chipset.
- [ 1.561822] audit: initializing netlink socket (disabled)
- [ 1.561851] type=2000 audit(1253682667.560:1): initialized
- [ 1.570943] highmem bounce pool size: 64 pages
- [ 1.570948] HugeTLB registered 4 MB page size, pre-allocated 0 pages
- [ 1.572582] VFS: Disk quotas dquot_6.5.1
- [ 1.572653] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 1.573377] fuse init (API version 7.10)
- [ 1.573477] msgmni has been set to 1672
- [ 1.573697] alg: No test for stdrng (krng)
- [ 1.573713] io scheduler noop registered
- [ 1.573716] io scheduler anticipatory registered
- [ 1.573718] io scheduler deadline registered
- [ 1.573734] io scheduler cfq registered (default)
- [ 1.573924] pci 0000:00:03.0: Disabling HT MSI mapping<6>pci 0000:00:07.0: Disabling HT MSI mapping<6>pci 0000:00:09.0: Disabling HT MSI mapping<6>pci 0000:00:0e.0: Disabling HT MSI mapping<6>pci 0000:00:0f.0: Disabling HT MSI mapping<6>pci 0000:00:10.0: Disabling HT MSI mapping<6>pci 0000:00:10.1: Disabling HT MSI mapping<7>pci 0000:01:00.0: Boot video device
- [ 1.611879] pcieport-driver 0000:00:03.0: setting latency timer to 64
- [ 1.611926] pcieport-driver 0000:00:03.0: found MSI capability
- [ 1.611954] pcieport-driver 0000:00:03.0: irq 2303 for MSI/MSI-X
- [ 1.611965] pci_express 0000:00:03.0:pcie00: allocate port service
- [ 1.611982] pci_express 0000:00:03.0:pcie03: allocate port service
- [ 1.612043] pcieport-driver 0000:00:07.0: setting latency timer to 64
- [ 1.612088] pcieport-driver 0000:00:07.0: found MSI capability
- [ 1.612112] pcieport-driver 0000:00:07.0: irq 2302 for MSI/MSI-X
- [ 1.612123] pci_express 0000:00:07.0:pcie00: allocate port service
- [ 1.612138] pci_express 0000:00:07.0:pcie03: allocate port service
- [ 1.612209] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 1.612221] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
- [ 1.612409] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
- [ 1.612412] ACPI: Power Button (FF) [PWRF]
- [ 1.612463] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
- [ 1.612466] ACPI: Power Button (CM) [PWRB]
- [ 1.612555] fan PNP0C0B:00: registered as cooling_device0
- [ 1.612564] ACPI: Fan [FAN] (on)
- [ 1.612984] processor ACPI_CPU:00: registered as cooling_device1
- [ 1.613028] processor ACPI_CPU:01: registered as cooling_device2
- [ 1.618410] thermal LNXTHERM:01: registered as thermal_zone0
- [ 1.618899] ACPI: Thermal Zone [THRM] (40 C)
- [ 1.618969] isapnp: Scanning for PnP cards...
- [ 1.971988] isapnp: No Plug & Play device found
- [ 1.980742] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
- [ 1.980846] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 1.981314] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 1.982218] brd: module loaded
- [ 1.982598] loop: module loaded
- [ 1.982672] Fixed MDIO Bus: probed
- [ 1.982678] PPP generic driver version 2.4.2
- [ 1.982743] input: Macintosh mouse button emulation as /devices/virtual/input/input2
- [ 1.982777] Driver 'sd' needs updating - please use bus_type methods
- [ 1.982788] Driver 'sr' needs updating - please use bus_type methods
- [ 1.982843] ahci 0000:02:00.0: version 3.0
- [ 1.983249] ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
- [ 1.983257] ahci 0000:02:00.0: PCI INT A -> Link[APC6] -> GSI 16 (level, low) -> IRQ 16
- [ 1.996025] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
- [ 1.996029] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part
- [ 1.996035] ahci 0000:02:00.0: setting latency timer to 64
- [ 1.996186] scsi0 : ahci
- [ 1.996258] ata1: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe100 irq 16
- [ 2.316021] ata1: SATA link down (SStatus 0 SControl 300)
- [ 2.332213] sata_nv 0000:00:0e.0: version 3.5
- [ 2.332614] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
- [ 2.332619] sata_nv 0000:00:0e.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
- [ 2.332623] sata_nv 0000:00:0e.0: Using SWNCQ mode
- [ 2.332666] sata_nv 0000:00:0e.0: setting latency timer to 64
- [ 2.332809] scsi1 : sata_nv
- [ 2.332886] scsi2 : sata_nv
- [ 2.333075] ata2: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xf800 irq 23
- [ 2.333078] ata3: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xf808 irq 23
- [ 3.212036] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 3.220172] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-H62L, DL00, max UDMA/100
- [ 3.236201] ata2.00: configured for UDMA/100
- [ 4.078539] ata3: SATA link down (SStatus 0 SControl 300)
- [ 4.082364] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H62L DL00 PQ: 0 ANSI: 5
- [ 4.407877] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 4.407880] Uniform CD-ROM driver Revision: 3.20
- [ 4.407985] sr 1:0:0:0: Attached scsi CD-ROM sr0
- [ 4.408041] sr 1:0:0:0: Attached scsi generic sg0 type 5
- [ 4.408452] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
- [ 4.408458] sata_nv 0000:00:0f.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
- [ 4.408462] sata_nv 0000:00:0f.0: Using SWNCQ mode
- [ 4.408505] sata_nv 0000:00:0f.0: setting latency timer to 64
- [ 4.408652] scsi3 : sata_nv
- [ 4.408725] scsi4 : sata_nv
- [ 4.408917] ata4: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xf300 irq 22
- [ 4.408921] ata5: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xf308 irq 22
- [ 5.142537] ata4: SATA link down (SStatus 0 SControl 300)
- [ 5.874538] ata5: SATA link down (SStatus 0 SControl 300)
- [ 5.874662] pata_amd 0000:00:0d.0: version 0.3.10
- [ 5.874702] pata_amd 0000:00:0d.0: setting latency timer to 64
- [ 5.874769] scsi5 : pata_amd
- [ 5.874833] scsi6 : pata_amd
- [ 5.875741] ata6: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfd00 irq 14
- [ 5.875744] ata7: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfd08 irq 15
- [ 6.080892] ata6.00: ATA-7: ST3320620A, 3.AAE, max UDMA/100
- [ 6.080896] ata6.00: 625142448 sectors, multi 1: LBA48
- [ 6.080927] ata6: nv_mode_filter: 0x3f39f&0x3f01f->0x3f01f, BIOS=0x3f000 (0xc600c6c6) ACPI=0x3f01f (20:600:0x13)
- [ 6.147494] ata6.00: configured for UDMA/100
- [ 6.317615] ata7.00: ATA-6: WDC WD2500JB-00GVA0, 08.02D08, max UDMA/100
- [ 6.317618] ata7.00: 488397168 sectors, multi 1: LBA48
- [ 6.362612] ata7.01: ATA-7: ST3320620A, 3.AAE, max UDMA/100
- [ 6.362614] ata7.01: 625142448 sectors, multi 1: LBA48
- [ 6.362645] ata7: nv_mode_filter: 0x3f39f&0x3f01f->0x3f01f, BIOS=0x3f000 (0xc600c6c6) ACPI=0x3f01f (20:20:0x1f)
- [ 6.362650] ata7: nv_mode_filter: 0x3f39f&0x3f01f->0x3f01f, BIOS=0x3f000 (0xc600c6c6) ACPI=0x3f01f (20:20:0x1f)
- [ 6.377564] ata7.00: configured for UDMA/100
- [ 6.437605] ata7.01: configured for UDMA/100
- [ 6.437698] scsi 5:0:0:0: Direct-Access ATA ST3320620A 3.AA PQ: 0 ANSI: 5
- [ 6.437804] sd 5:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
- [ 6.437824] sd 5:0:0:0: [sda] Write Protect is off
- [ 6.437827] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 6.437858] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 6.437924] sd 5:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
- [ 6.437942] sd 5:0:0:0: [sda] Write Protect is off
- [ 6.437945] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 6.437975] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 6.437979] sda: sda1 sda2 < sda5 sda6 >
- [ 6.468787] sd 5:0:0:0: [sda] Attached SCSI disk
- [ 6.468833] sd 5:0:0:0: Attached scsi generic sg1 type 0
- [ 6.468923] scsi 6:0:0:0: Direct-Access ATA WDC WD2500JB-00G 08.0 PQ: 0 ANSI: 5
- [ 6.469027] sd 6:0:0:0: [sdb] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
- [ 6.469045] sd 6:0:0:0: [sdb] Write Protect is off
- [ 6.469048] sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00
- [ 6.469079] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 6.469139] sd 6:0:0:0: [sdb] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
- [ 6.469157] sd 6:0:0:0: [sdb] Write Protect is off
- [ 6.469159] sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00
- [ 6.469189] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 6.469193] sdb: sdb1 sdb2
- [ 6.487029] sd 6:0:0:0: [sdb] Attached SCSI disk
- [ 6.487071] sd 6:0:0:0: Attached scsi generic sg2 type 0
- [ 6.487154] scsi 6:0:1:0: Direct-Access ATA ST3320620A 3.AA PQ: 0 ANSI: 5
- [ 6.487255] sd 6:0:1:0: [sdc] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
- [ 6.487273] sd 6:0:1:0: [sdc] Write Protect is off
- [ 6.487276] sd 6:0:1:0: [sdc] Mode Sense: 00 3a 00 00
- [ 6.487307] sd 6:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 6.487366] sd 6:0:1:0: [sdc] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
- [ 6.487384] sd 6:0:1:0: [sdc] Write Protect is off
- [ 6.487387] sd 6:0:1:0: [sdc] Mode Sense: 00 3a 00 00
- [ 6.487418] sd 6:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 6.487422] sdc: sdc1 sdc2 < sdc5 sdc6 >
- [ 6.524983] sd 6:0:1:0: [sdc] Attached SCSI disk
- [ 6.525031] sd 6:0:1:0: Attached scsi generic sg3 type 0
- [ 6.525691] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 6.526102] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
- [ 6.526108] ehci_hcd 0000:00:0b.1: PCI INT B -> Link[APCL] -> GSI 21 (level, low) -> IRQ 21
- [ 6.526120] ehci_hcd 0000:00:0b.1: setting latency timer to 64
- [ 6.526124] ehci_hcd 0000:00:0b.1: EHCI Host Controller
- [ 6.526191] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
- [ 6.526224] ehci_hcd 0000:00:0b.1: debug port 1
- [ 6.526230] ehci_hcd 0000:00:0b.1: cache line size of 32 is not supported
- [ 6.526246] ehci_hcd 0000:00:0b.1: irq 21, io mem 0xfe02e000
- [ 6.536010] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00
- [ 6.536092] usb usb1: configuration #1 chosen from 1 choice
- [ 6.536123] hub 1-0:1.0: USB hub found
- [ 6.536130] hub 1-0:1.0: 8 ports detected
- [ 6.536251] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 6.536657] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
- [ 6.536663] ohci_hcd 0000:00:0b.0: PCI INT A -> Link[APCF] -> GSI 20 (level, low) -> IRQ 20
- [ 6.536675] ohci_hcd 0000:00:0b.0: setting latency timer to 64
- [ 6.536679] ohci_hcd 0000:00:0b.0: OHCI Host Controller
- [ 6.536735] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
- [ 6.536757] ohci_hcd 0000:00:0b.0: irq 20, io mem 0xfe02f000
- [ 6.594062] usb usb2: configuration #1 chosen from 1 choice
- [ 6.594095] hub 2-0:1.0: USB hub found
- [ 6.594104] hub 2-0:1.0: 8 ports detected
- [ 6.594212] uhci_hcd: USB Universal Host Controller Interface driver
- [ 6.594308] PNP: No PS/2 controller found. Probing ports directly.
- [ 6.594657] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 6.594664] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 6.596045] mice: PS/2 mouse device common for all mice
- [ 6.596214] rtc_cmos 00:05: RTC can wake from S4
- [ 6.596250] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
- [ 6.596282] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
- [ 6.596352] device-mapper: uevent: version 1.0.3
- [ 6.596446] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
- [ 6.596533] device-mapper: multipath: version 1.0.5 loaded
- [ 6.596536] device-mapper: multipath round-robin: version 1.0.0 loaded
- [ 6.596620] EISA: Probing bus 0 at eisa.0
- [ 6.596626] Cannot allocate resource for EISA slot 1
- [ 6.596651] EISA: Detected 0 cards.
- [ 6.596700] cpuidle: using governor ladder
- [ 6.596702] cpuidle: using governor menu
- [ 6.597313] TCP cubic registered
- [ 6.597425] NET: Registered protocol family 10
- [ 6.597940] lo: Disabled Privacy Extensions
- [ 6.598345] NET: Registered protocol family 17
- [ 6.598364] Bluetooth: L2CAP ver 2.11
- [ 6.598366] Bluetooth: L2CAP socket layer initialized
- [ 6.598369] Bluetooth: SCO (Voice Link) ver 0.6
- [ 6.598371] Bluetooth: SCO socket layer initialized
- [ 6.598399] Bluetooth: RFCOMM socket layer initialized
- [ 6.598406] Bluetooth: RFCOMM TTY layer initialized
- [ 6.598408] Bluetooth: RFCOMM ver 1.10
- [ 6.598462] Using IPI No-Shortcut mode
- [ 6.598536] registered taskstats version 1
- [ 6.598710] Magic number: 9:889:163
- [ 6.598779] rtc_cmos 00:05: setting system clock to 2009-09-23 05:11:13 UTC (1253682673)
- [ 6.598783] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
- [ 6.598785] EDD information not available.
- [ 6.599071] Freeing unused kernel memory: 532k freed
- [ 6.599225] Write protecting the kernel text: 4116k
- [ 6.599280] Write protecting the kernel read-only data: 1528k
- [ 6.759968] md: linear personality registered for level -1
- [ 6.762629] md: multipath personality registered for level -4
- [ 6.765051] md: raid0 personality registered for level 0
- [ 6.768773] md: raid1 personality registered for level 1
- [ 6.771002] xor: automatically using best checksumming function: pIII_sse
- [ 6.788504] pIII_sse : 5600.000 MB/sec
- [ 6.788507] xor: using function: pIII_sse (5600.000 MB/sec)
- [ 6.789852] async_tx: api initialized (async)
- [ 6.860519] raid6: int32x1 603 MB/s
- [ 6.928579] raid6: int32x2 644 MB/s
- [ 6.996512] raid6: int32x4 481 MB/s
- [ 7.064608] raid6: int32x8 439 MB/s
- [ 7.132529] raid6: mmxx1 2012 MB/s
- [ 7.200528] raid6: mmxx2 2313 MB/s
- [ 7.268524] raid6: sse1x1 1420 MB/s
- [ 7.336506] raid6: sse1x2 1787 MB/s
- [ 7.337112] usb 1-5: new high speed USB device using ehci_hcd and address 5
- [ 7.404515] raid6: sse2x1 2679 MB/s
- [ 7.472505] raid6: sse2x2 3236 MB/s
- [ 7.472508] raid6: using algorithm sse2x2 (3236 MB/s)
- [ 7.472511] md: raid6 personality registered for level 6
- [ 7.472514] md: raid5 personality registered for level 5
- [ 7.472516] md: raid4 personality registered for level 4
- [ 7.507256] md: raid10 personality registered for level 10
- [ 7.642980] usb 1-5: configuration #1 chosen from 4 choices
- [ 7.709922] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
- [ 7.710356] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
- [ 7.710362] forcedeth 0000:00:14.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23
- [ 7.710368] forcedeth 0000:00:14.0: setting latency timer to 64
- [ 7.710440] nv_probe: set workaround bit for reversed mac addr
- [ 7.727473] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
- [ 7.727482] ohci1394 0000:03:08.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18
- [ 7.780215] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[fdfff000-fdfff7ff] Max Packet=[2048] IR/IT contexts=[4/8]
- [ 7.928705] md: bind<sda1>
- [ 7.938099] md: bind<sda6>
- [ 8.073757] usb 2-1: new low speed USB device using ohci_hcd and address 2
- [ 8.170401] md: bind<sdc1>
- [ 8.211499] md: bind<sdc6>
- [ 8.213058] raid1: raid set md0 active with 2 out of 2 mirrors
- [ 8.216415] md0:<6>raid1: raid set md1 active with 2 out of 2 mirrors
- [ 8.217238] unknown partition table
- [ 8.218460] md1: unknown partition table
- [ 8.228965] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:1b:fc:bd:e9:68
- [ 8.228970] forcedeth 0000:00:14.0: highdma pwrctl timirq gbit lnktim desc-v3
- [ 8.289124] usb 2-1: configuration #1 chosen from 1 choice
- [ 8.298279] usbcore: registered new interface driver hiddev
- [ 8.311802] input: Microsoft Microsoft Wireless Optical Mouse� 1.00 as /devices/pci0000:00/0000:00:0b.0/usb2/2-1/2-1:1.0/input/input3
- [ 8.316556] generic-usb 0003:045E:00E1.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse� 1.00] on usb-0000:00:0b.0-1/input0
- [ 8.316573] usbcore: registered new interface driver usbhid
- [ 8.316576] usbhid: v2.6:USB HID core driver
- [ 8.377360] PM: Starting manual resume from disk
- [ 8.377364] PM: Resume from partition 8:5
- [ 8.377366] PM: Checking hibernation image.
- [ 8.377587] PM: Resume from disk failed.
- [ 8.416207] kjournald starting. Commit interval 5 seconds
- [ 8.416217] EXT3-fs: mounted filesystem with ordered data mode.
- [ 8.596015] usb 2-2: new low speed USB device using ohci_hcd and address 3
- [ 8.825135] usb 2-2: configuration #1 chosen from 1 choice
- [ 9.068156] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d800015a6016]
- [ 9.132017] usb 2-4: new full speed USB device using ohci_hcd and address 4
- [ 9.347128] usb 2-4: configuration #1 chosen from 1 choice
- [ 9.652014] usb 2-6: new full speed USB device using ohci_hcd and address 5
- [ 9.855138] usb 2-6: configuration #1 chosen from 1 choice
- [ 9.858099] hub 2-6:1.0: USB hub found
- [ 9.861070] hub 2-6:1.0: 4 ports detected
- [ 10.181074] usb 2-6.3: new full speed USB device using ohci_hcd and address 6
- [ 10.296076] usb 2-6.3: not running at top speed; connect to a high speed hub
- [ 10.314129] usb 2-6.3: configuration #1 chosen from 1 choice
- [ 12.764759] udev: starting version 141
- [ 12.944181] usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04E8 pid 0x324C
- [ 12.944205] usbcore: registered new interface driver usblp
- [ 12.957850] Linux agpgart interface v0.103
- [ 12.974162] Initializing USB Mass Storage driver...
- [ 12.974640] scsi7 : SCSI emulation for USB Mass Storage devices
- [ 12.974747] usb-storage: device found at 6
- [ 12.974750] usb-storage: waiting for device to settle before scanning
- [ 12.975249] scsi8 : SCSI emulation for USB Mass Storage devices
- [ 12.975350] usbcore: registered new interface driver usb-storage
- [ 12.975355] USB Mass Storage support registered.
- [ 12.975442] usb-storage: device found at 6
- [ 12.975444] usb-storage: waiting for device to settle before scanning
- [ 13.002882] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
- [ 13.002909] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c80
- [ 13.135352] parport_pc 00:09: reported by Plug and Play ACPI
- [ 13.135380] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
- [ 13.171493] input: Microsoft Natural� Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:0b.0/usb2/2-2/2-2:1.0/input/input4
- [ 13.193739] microsoft 0003:045E:00DB.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Natural� Ergonomic Keyboard 4000] on usb-0000:00:0b.0-2/input0
- [ 13.209362] input: Microsoft Natural� Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:0b.0/usb2/2-2/2-2:1.1/input/input5
- [ 13.212138] microsoft 0003:045E:00DB.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Natural� Ergonomic Keyboard 4000] on usb-0000:00:0b.0-2/input1
- [ 13.569317] nvidia: module license 'NVIDIA' taints kernel.
- [ 13.603675] input: PC Speaker as /devices/platform/pcspkr/input/input6
- [ 13.622414] ppdev: user-space parallel port driver
- [ 13.823740] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
- [ 13.823746] nvidia 0000:01:00.0: PCI INT A -> Link[APC5] -> GSI 16 (level, low) -> IRQ 16
- [ 13.823753] nvidia 0000:01:00.0: setting latency timer to 64
- [ 13.824352] NVRM: loading NVIDIA UNIX x86 Kernel Module 180.44 Mon Mar 23 14:59:10 PST 2009
- [ 14.072910] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
- [ 14.072917] HDA Intel 0000:00:10.1: PCI INT B -> Link[AAZA] -> GSI 22 (level, low) -> IRQ 22
- [ 14.072981] HDA Intel 0000:00:10.1: setting latency timer to 64
- [ 14.840672] lp0: using parport0 (interrupt-driven).
- [ 14.985822] Adding 2024148k swap on /dev/sda5. Priority:-1 extents:1 across:2024148k
- [ 15.042532] Adding 2024148k swap on /dev/sdc5. Priority:-2 extents:1 across:2024148k
- [ 17.973218] usb-storage: device scan complete
- [ 17.973241] usb-storage: device scan complete
- [ 17.980213] scsi 7:0:0:0: Direct-Access RIM BlackBerry 1002 PQ: 0 ANSI: 4 CCS
- [ 17.980263] scsi 8:0:0:0: Direct-Access RIM BlackBerry SD 0002 PQ: 0 ANSI: 0 CCS
- [ 17.992208] sd 8:0:0:0: [sdd] Attached SCSI removable disk
- [ 17.992283] sd 8:0:0:0: Attached scsi generic sg4 type 0
- [ 18.002279] sd 7:0:0:0: [sde] Attached SCSI removable disk
- [ 18.002349] sd 7:0:0:0: Attached scsi generic sg5 type 0
- [ 115.831594] EXT3 FS on md0, internal journal
- [ 116.790838] kjournald starting. Commit interval 5 seconds
- [ 116.816292] EXT3 FS on md1, internal journal
- [ 116.816297] EXT3-fs: mounted filesystem with ordered data mode.
- [ 116.975179] type=1505 audit(1253682783.873:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=3336
- [ 117.029734] type=1505 audit(1253682783.929:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=3340
- [ 117.029824] type=1505 audit(1253682783.929:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=3340
- [ 117.029869] type=1505 audit(1253682783.929:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=3340
- [ 117.029912] type=1505 audit(1253682783.929:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=3340
- [ 117.180198] type=1505 audit(1253682784.081:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=3345
- [ 117.180353] type=1505 audit(1253682784.081:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=3345
- [ 117.262913] type=1505 audit(1253682784.161:9): operation="profile_load" name="/usr/sbin/mysqld" name2="default" pid=3349
- [ 117.293444] type=1505 audit(1253682784.193:10): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=3353
- [ 119.468352] RPC: Registered udp transport module.
- [ 119.468355] RPC: Registered tcp transport module.
- [ 119.517369] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
- [ 119.588154] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
- [ 119.588176] NFSD: starting 90-second grace period
- [ 121.879079] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 121.879082] Bluetooth: BNEP filters: protocol multicast
- [ 121.908982] Bridge firewalling registered
- [ 123.850456] ppdev0: registered pardevice
- [ 123.896652] ppdev0: unregistered pardevice
- [ 137.808010] eth0: no IPv6 routers present
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement