Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Copyright (c) 1992-2009 The FreeBSD Project.
- Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
- The Regents of the University of California. All rights reserved.
- FreeBSD is a registered trademark of The FreeBSD Foundation.
- FreeBSD 8.0-RC1 #0: Thu Sep 17 20:45:19 UTC 2009
- root@almeida.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
- Timecounter "i8254" frequency 1193182 Hz quality 0
- CPU: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz (1994.44-MHz 686-class CPU)
- Origin = "GenuineIntel" Id = 0x6fa Stepping = 10
- Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
- Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
- AMD Features=0x20100000<NX,LM>
- AMD Features2=0x1<LAHF>
- TSC: P-state invariant
- real memory = 2147483648 (2048 MB)
- avail memory = 2081193984 (1984 MB)
- ACPI APIC Table: <DELL M08 >
- FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
- FreeBSD/SMP: 1 package(s) x 2 core(s)
- cpu0 (BSP): APIC ID: 0
- cpu1 (AP): APIC ID: 1
- ioapic0: Changing APIC ID to 2
- ioapic0 <Version 2.0> irqs 0-23 on motherboard
- kbd1 at kbdmux0
- acpi0: <DELL M08 > on motherboard
- acpi0: [ITHREAD]
- ACPI Warning: Incorrect checksum in table [TCPA] - 33, should be D7 20090521 tbutils-275
- acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
- Timecounter "HPET" frequency 14318180 Hz quality 900
- acpi0: reservation of 0, 9f000 (3) failed
- acpi0: reservation of 100000, 7f55a800 (3) failed
- Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
- acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
- pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
- pci0: <ACPI PCI bus> on pcib0
- vgapci0: <VGA-compatible display> port 0xeff8-0xefff mem 0xf6e00000-0xf6efffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
- agp0: <Intel GM965 SVGA controller> on vgapci0
- agp0: detected 7676k stolen memory
- agp0: aperture size is 256M
- vgapci1: <VGA-compatible display> mem 0xf6f00000-0xf6ffffff at device 2.1 on pci0
- uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0x6f20-0x6f3f irq 20 at device 26.0 on pci0
- uhci0: [ITHREAD]
- uhci0: LegSup = 0x0f00
- usbus0: <Intel 82801H (ICH8) USB controller USB-D> on uhci0
- uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0x6f00-0x6f1f irq 21 at device 26.1 on pci0
- uhci1: [ITHREAD]
- uhci1: LegSup = 0x0f00
- usbus1: <Intel 82801H (ICH8) USB controller USB-E> on uhci1
- ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem 0xfed1c400-0xfed1c7ff irq 22 at device 26.7 on pci0
- ehci0: [ITHREAD]
- usbus2: EHCI version 1.0
- usbus2: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> on ehci0
- pci0: <multimedia, HDA> at device 27.0 (no driver attached)
- pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
- pci11: <ACPI PCI bus> on pcib1
- pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0
- pci12: <ACPI PCI bus> on pcib2
- wpi0: <Intel(R) PRO/Wireless 3945ABG> mem 0xf6cff000-0xf6cfffff irq 17 at device 0.0 on pci12
- wpi0: Driver Revision 20071127
- wpi0: Hardware Revision (0x1)
- adding chan 1 (2412MHz) flags=0x2b maxpwr=15 passive=0, offset 2
- adding chan 2 (2417MHz) flags=0x2b maxpwr=15 passive=0, offset 4
- adding chan 3 (2422MHz) flags=0x2b maxpwr=15 passive=0, offset 6
- adding chan 4 (2427MHz) flags=0x2b maxpwr=15 passive=0, offset 8
- adding chan 5 (2432MHz) flags=0x2b maxpwr=15 passive=0, offset 10
- adding chan 6 (2437MHz) flags=0x2b maxpwr=15 passive=0, offset 12
- adding chan 7 (2442MHz) flags=0x2b maxpwr=15 passive=0, offset 14
- adding chan 8 (2447MHz) flags=0x2b maxpwr=15 passive=0, offset 16
- adding chan 9 (2452MHz) flags=0x2b maxpwr=15 passive=0, offset 18
- adding chan 10 (2457MHz) flags=0x2b maxpwr=15 passive=0, offset 20
- adding chan 11 (2462MHz) flags=0x2b maxpwr=14 passive=0, offset 22
- adding chan 36 (5180MHz) flags=0xa1 maxpwr=14 passive=1, offset 23
- adding chan 40 (5200MHz) flags=0xa1 maxpwr=14 passive=1, offset 24
- adding chan 44 (5220MHz) flags=0xa1 maxpwr=14 passive=1, offset 25
- adding chan 48 (5240MHz) flags=0xa1 maxpwr=14 passive=1, offset 26
- adding chan 52 (5260MHz) flags=0xb1 maxpwr=14 passive=1, offset 27
- adding chan 56 (5280MHz) flags=0xb1 maxpwr=14 passive=1, offset 28
- adding chan 60 (5300MHz) flags=0xb1 maxpwr=14 passive=1, offset 29
- adding chan 64 (5320MHz) flags=0xb1 maxpwr=14 passive=1, offset 30
- adding chan 149 (5745MHz) flags=0x21 maxpwr=16 passive=1, offset 31
- adding chan 153 (5765MHz) flags=0x21 maxpwr=16 passive=1, offset 32
- adding chan 157 (5785MHz) flags=0x21 maxpwr=16 passive=1, offset 33
- adding chan 161 (5805MHz) flags=0x21 maxpwr=16 passive=1, offset 34
- adding chan 165 (5825MHz) flags=0x21 maxpwr=16 passive=1, offset 35
- power group 0: chan=1 maxpwr=48 temp=-184
- sample 0: index=13 power=45
- sample 1: index=29 power=34
- sample 2: index=47 power=15
- sample 3: index=58 power=5
- sample 4: index=77 power=-14
- power group 1: chan=44 maxpwr=58 temp=-187
- sample 0: index=12 power=52
- sample 1: index=19 power=44
- sample 2: index=32 power=31
- sample 3: index=43 power=21
- sample 4: index=77 power=-12
- power group 2: chan=64 maxpwr=60 temp=-185
- sample 0: index=12 power=54
- sample 1: index=20 power=47
- sample 2: index=33 power=35
- sample 3: index=44 power=25
- sample 4: index=77 power=-6
- power group 3: chan=116 maxpwr=54 temp=-184
- sample 0: index=12 power=45
- sample 1: index=20 power=37
- sample 2: index=36 power=21
- sample 3: index=48 power=11
- sample 4: index=77 power=-16
- power group 4: chan=153 maxpwr=52 temp=-183
- sample 0: index=10 power=42
- sample 1: index=20 power=31
- sample 2: index=32 power=19
- sample 3: index=42 power=12
- sample 4: index=77 power=-20
- wpi0: Regulatory Domain: MoW1
- wpi0: Hardware Type: B
- wpi0: Hardware Revision: ?
- wpi0: SKU does support 802.11a
- wpi0: [ITHREAD]
- pcib3: <ACPI PCI-PCI bridge> at device 28.5 on pci0
- pci9: <ACPI PCI bus> on pcib3
- bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0xa002> mem 0xf6bf0000-0xf6bfffff irq 17 at device 0.0 on pci9
- miibus0: <MII bus> on bge0
- brgphy0: <BCM5755 10/100/1000baseTX PHY> PHY 1 on miibus0
- brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
- bge0: Ethernet address: 00:1c:23:11:f8:fa
- bge0: [ITHREAD]
- uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0x6f80-0x6f9f irq 20 at device 29.0 on pci0
- uhci2: [ITHREAD]
- uhci2: LegSup = 0x0f00
- usbus3: <Intel 82801H (ICH8) USB controller USB-A> on uhci2
- uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0x6f60-0x6f7f irq 21 at device 29.1 on pci0
- uhci3: [ITHREAD]
- uhci3: LegSup = 0x0f00
- usbus4: <Intel 82801H (ICH8) USB controller USB-B> on uhci3
- uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0x6f40-0x6f5f irq 22 at device 29.2 on pci0
- uhci4: [ITHREAD]
- uhci4: LegSup = 0x0f00
- usbus5: <Intel 82801H (ICH8) USB controller USB-C> on uhci4
- ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem 0xfed1c000-0xfed1c3ff irq 20 at device 29.7 on pci0
- ehci1: [ITHREAD]
- usbus6: EHCI version 1.0
- usbus6: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> on ehci1
- pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
- pci3: <ACPI PCI bus> on pcib4
- cbb0: <PCI-CardBus Bridge> at device 1.0 on pci3
- cardbus0: <CardBus bus> on cbb0
- pccard0: <16-bit PCCard bus> on cbb0
- cbb0: [FILTER]
- fwohci0: <1394 Open Host Controller Interface> mem 0xf6aff000-0xf6afffff,0xf6afe800-0xf6afefff irq 19 at device 1.4 on pci3
- fwohci0: [ITHREAD]
- fwohci0: OHCI version 1.10 (ROM=0)
- fwohci0: No. of Isochronous channels is 8.
- fwohci0: EUI64 47:4f:c0:00:01:63:6d:81
- fwohci0: Phy 1394a available S400, 1 ports.
- fwohci0: Link S400, max_rec 2048 bytes.
- firewire0: <IEEE1394(FireWire) bus> on fwohci0
- dcons_crom0: <dcons configuration ROM> on firewire0
- dcons_crom0: bus_addr 0x13c4000
- fwe0: <Ethernet over FireWire> on firewire0
- if_fwe0: Fake Ethernet address: 46:4f:c0:63:6d:81
- fwe0: Ethernet address: 46:4f:c0:63:6d:81
- fwip0: <IP over FireWire> on firewire0
- fwip0: Firewire address: 47:4f:c0:00:01:63:6d:81 @ 0xfffe00000000, S400, maxrec 2048
- sbp0: <SBP-2/SCSI over FireWire> on firewire0
- fwohci0: Initiate bus reset
- fwohci0: fwohci_intr_core: BUS reset
- fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
- isab0: <PCI-ISA bridge> at device 31.0 on pci0
- isa0: <ISA bus> on isab0
- atapci0: <Intel ICH8M UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x6fa0-0x6faf irq 16 at device 31.1 on pci0
- ata0: <ATA channel 0> on atapci0
- ata0: [ITHREAD]
- atapci1: <Intel ICH8M SATA300 controller> port 0x6eb0-0x6eb7,0x6eb8-0x6ebb,0x6ec0-0x6ec7,0x6ec8-0x6ecb,0x6ee0-0x6eff mem 0xf6dfb800-0xf6dfbfff irq 18 at device 31.2 on pci0
- atapci1: [ITHREAD]
- atapci1: AHCI called from vendor specific driver
- atapci1: AHCI v1.10 controller with 3 3Gbps ports, PM not supported
- ata2: <ATA channel 0> on atapci1
- ata2: [ITHREAD]
- ata3: <ATA channel 2> on atapci1
- ata3: [ITHREAD]
- pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
- acpi_lid0: <Control Method Lid Switch> on acpi0
- acpi_button0: <Power Button> on acpi0
- acpi_button1: <Sleep Button> on acpi0
- acpi_acad0: <AC Adapter> on acpi0
- battery0: <ACPI Control Method Battery> on acpi0
- battery1: <ACPI Control Method Battery> on acpi0
- acpi_tz0: <Thermal Zone> on acpi0
- atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64,0x62,0x66 irq 1 on acpi0
- atkbd0: <AT Keyboard> irq 1 on atkbdc0
- kbd0 at atkbd0
- atkbd0: [GIANT-LOCKED]
- atkbd0: [ITHREAD]
- psm0: <PS/2 Mouse> irq 12 on atkbdc0
- psm0: [GIANT-LOCKED]
- psm0: [ITHREAD]
- psm0: model GlidePoint, device ID 0
- atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x77 irq 8 on acpi0
- uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
- uart0: [FILTER]
- cpu0: <ACPI CPU> on acpi0
- est0: <Enhanced SpeedStep Frequency Control> on cpu0
- p4tcc0: <CPU Frequency Thermal Control> on cpu0
- cpu1: <ACPI CPU> on acpi0
- est1: <Enhanced SpeedStep Frequency Control> on cpu1
- p4tcc1: <CPU Frequency Thermal Control> on cpu1
- pmtimer0 on isa0
- orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xcf000-0xcffff pnpid ORM0000 on isa0
- sc0: <System console> at flags 0x100 on isa0
- sc0: VGA <16 virtual consoles, flags=0x300>
- vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
- ppc0: parallel port not found.
- Timecounters tick every 1.000 msec
- firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
- firewire0: bus manager 0
- usbus0: 12Mbps Full Speed USB v1.0
- usbus1: 12Mbps Full Speed USB v1.0
- usbus2: 480Mbps High Speed USB v2.0
- usbus3: 12Mbps Full Speed USB v1.0
- usbus4: 12Mbps Full Speed USB v1.0
- usbus5: 12Mbps Full Speed USB v1.0
- usbus6: 480Mbps High Speed USB v2.0
- ad4: 76319MB <Seagate ST980813AS 3.ADC> at ata2-master SATA300
- ugen0.1: <Intel> at usbus0
- uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
- ugen1.1: <Intel> at usbus1
- uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
- ugen2.1: <Intel> at usbus2
- uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
- ugen3.1: <Intel> at usbus3
- uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
- ugen4.1: <Intel> at usbus4
- uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
- ugen5.1: <Intel> at usbus5
- uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
- ugen6.1: <Intel> at usbus6
- uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
- GEOM: ad4s2: geometry does not match label (255h,63s != 16h,63s).
- uhub0: 2 ports with 2 removable, self powered
- uhub1: 2 ports with 2 removable, self powered
- uhub3: 2 ports with 2 removable, self powered
- uhub4: 2 ports with 2 removable, self powered
- uhub5: 2 ports with 2 removable, self powered
- uhub2: 4 ports with 4 removable, self powered
- uhub6: 6 ports with 6 removable, self powered
- ugen0.2: <Broadcom> at usbus0
- uhub7: <Broadcom BCM2045B2, class 9/0, rev 2.00/1.00, addr 2> on usbus0
- uhub7: 3 ports with 0 removable, bus powered
- ugen5.2: <vendor 0x0b97> at usbus5
- uhub8: <vendor 0x0b97 product 0x7761, class 9/0, rev 1.10/1.10, addr 2> on usbus5
- SMP: AP CPU #1 Launched!
- Trying to mount root from ufs:/dev/ad4s2a
- ugen0.3: <Broadcom Corp> at usbus0
- uhub8: 4 ports with 3 removable, self powered
- ugen0.4: <Broadcom Corp> at usbus0
- ukbd0: <Broadcom Corp product 0x4502, class 0/0, rev 2.00/1.00, addr 4> on usbus0
- kbd2 at ukbd0
- ugen5.3: <O2> at usbus5
- ugen0.5: <Broadcom Corp> at usbus0
- ums0: <Broadcom Corp product 0x4503, class 0/0, rev 2.00/1.00, addr 5> on usbus0
- ums0: 3 buttons and [XY] coordinates ID=2
- wlan0: Ethernet address: 00:1b:77:df:c9:5c
- wpi0: timeout resetting Tx ring 1
- wpi0: timeout resetting Tx ring 3
- wpi0: timeout resetting Tx ring 4
- microcode alive notification version 10e02 alive 1
- microcode alive notification version 10e02 alive 1
- wpi_newstate: INIT -> SCAN flags 0x0
- wpi_newstate: SCAN -> INIT flags 0x0
- wlan0: Ethernet address: 00:1b:77:df:c9:5c
- wpi0: timeout resetting Tx ring 1
- wpi0: timeout resetting Tx ring 3
- wpi0: timeout resetting Tx ring 4
- microcode alive notification version 10e02 alive 1
- microcode alive notification version 10e02 alive 1
- wpi_newstate: INIT -> SCAN flags 0x0
- wpi_newstate: SCAN -> AUTH flags 0x0
- config chan 6 flags 8005 cck f ofdm 15
- wpi_newstate: AUTH -> ASSOC flags 0x0
- wpi_newstate: ASSOC -> RUN flags 0x0
- config chan 6 flags 8035
- wlan0: link state changed to UP
- wpi0: need multicast update callback
- wpi0: need multicast update callback
- wpi0: need multicast update callback
- wpi_newstate: RUN -> AUTH flags 0x0
- config chan 6 flags 8035 cck f ofdm 15
- wlan0: link state changed to DOWN
- wpi_newstate: AUTH -> AUTH flags 0x0
- config chan 6 flags 8035 cck f ofdm 15
- wpi_newstate: AUTH -> ASSOC flags 0x0
- wpi_newstate: ASSOC -> RUN flags 0x0
- config chan 6 flags 8035
- wlan0: link state changed to UP
- wpi0: need multicast update callback
- wpi0: need multicast update callback
- Beacon miss: 20 >= 7
- Beacon miss: 21 >= 7
- wpi_newstate: RUN -> SCAN flags 0x0
- wlan0: link state changed to DOWN
- Beacon miss: 22 >= 7
- Beacon miss: 23 >= 7
- Beacon miss: 24 >= 7
- Beacon miss: 25 >= 7
- Beacon miss: 26 >= 7
- Beacon miss: 27 >= 7
- Beacon miss: 28 >= 7
- Beacon miss: 29 >= 7
- Beacon miss: 30 >= 7
- Beacon miss: 31 >= 7
- Beacon miss: 32 >= 7
- Beacon miss: 33 >= 7
- Beacon miss: 34 >= 7
- Beacon miss: 35 >= 7
- Beacon miss: 36 >= 7
- Beacon miss: 37 >= 7
- Beacon miss: 38 >= 7
- Beacon miss: 39 >= 7
- Beacon miss: 40 >= 7
- Beacon miss: 41 >= 7
- Beacon miss: 42 >= 7
- Beacon miss: 43 >= 7
- Beacon miss: 44 >= 7
- Beacon miss: 45 >= 7
- Beacon miss: 46 >= 7
- Beacon miss: 47 >= 7
- Beacon miss: 48 >= 7
- Beacon miss: 49 >= 7
- Beacon miss: 50 >= 7
- Beacon miss: 51 >= 7
- Beacon miss: 52 >= 7
- Beacon miss: 53 >= 7
- Beacon miss: 54 >= 7
- Beacon miss: 55 >= 7
- Beacon miss: 56 >= 7
- Beacon miss: 57 >= 7
- Beacon miss: 58 >= 7
- Beacon miss: 59 >= 7
- Beacon miss: 60 >= 7
- Beacon miss: 61 >= 7
- Beacon miss: 62 >= 7
- Beacon miss: 63 >= 7
- Beacon miss: 64 >= 7
- Beacon miss: 65 >= 7
- Beacon miss: 66 >= 7
- Beacon miss: 67 >= 7
- wpi0: scan timeout
- microcode alive notification version 10e02 alive 1
- microcode alive notification version 10e02 alive 1
- bge0: link state changed to UP
- bge0: link state changed to DOWN
- bge0: link state changed to UP
- wpi_newstate: SCAN -> INIT flags 0x0
- drm0: <Intel i965GM> on vgapci0
- info: [drm] MSI enabled 1 message(s)
- vgapci0: child drm0 requested pci_enable_busmaster
- info: [drm] AGP at 0xe0000000 256MB
- info: [drm] Initialized i915 1.6.0 20080730
- drm0: [ITHREAD]
- ugen0.2: <Broadcom> at usbus0 (disconnected)
- uhub7: at uhub0, port 2, addr 2 (disconnected)
- ugen0.3: <Broadcom Corp> at usbus0 (disconnected)
- ugen0.4: <Broadcom Corp> at usbus0 (disconnected)
- ugen0.5: <Broadcom Corp> at usbus0 (disconnected)
- IPv4 address: "10.0.0.1" is not on the network
- IPv4 address: "10.0.0.1" is not on the network
- IPv4 address: "10.0.0.1" is not on the network
- IPv4 address: "10.0.0.1" is not on the network
- IPv4 address: "10.0.0.1" is not on the network
- IPv4 address: "10.0.0.1" is not on the network
- IPv4 address: "10.0.0.1" is not on the network
- IPv4 address: "10.0.0.1" is not on the network
- IPv4 address: "10.0.0.1" is not on the network
- IPv4 address: "10.0.0.1" is not on the network
- IPv4 address: "10.0.0.1" is not on the network
- IPv4 address: "10.0.0.1" is not on the network
- IPv4 address: "10.0.0.1" is not on the network
- IPv4 address: "10.0.0.1" is not on the network
- IPv4 address: "10.0.0.1" is not on the network
- IPv4 address: "10.0.0.1" is not on the network
- IPv4 address: "10.0.0.1" is not on the network
- IPv4 address: "10.0.0.1" is not on the network
- IPv4 address: "10.0.0.1" is not on the network
- IPv4 address: "10.0.0.1" is not on the network
- IPv4 address: "10.0.0.1" is not on the network
- IPv4 address: "10.0.0.1" is not on the network
- IPv4 address: "10.0.0.1" is not on the network
- IPv4 address: "10.0.0.1" is not on the network
- IPv4 address: "10.0.0.1" is not on the network
- IPv4 address: "10.0.0.1" is not on the network
- IPv4 address: "10.0.0.1" is not on the network
- IPv4 address: "10.0.0.1" is not on the network
- IPv4 address: "10.0.0.2" is not on the network
- ifa_add_loopback_route: insertion failed
- bge0: link state changed to DOWN
- bge0: link state changed to UP
- ifa_del_loopback_route: deletion failed
- ifa_del_loopback_route: deletion failed
- wpi0: need multicast update callback
- wpi_newstate: INIT -> INIT flags 0x0
- ifa_del_loopback_route: deletion failed
- bge0: link state changed to DOWN
- wlan0: Ethernet address: 00:1b:77:df:c9:5c
- wpi0: timeout resetting Tx ring 1
- wpi0: timeout resetting Tx ring 3
- wpi0: timeout resetting Tx ring 4
- microcode alive notification version 10e02 alive 1
- microcode alive notification version 10e02 alive 1
- wpi0: Radio Transmitter is switched off
- state changed to 1
- wpi0: Radio transmitter is switched off
- bge0: link state changed to UP
- bge0: link state changed to DOWN
- bge0: link state changed to UP
- ugen6.2: <Kingston> at usbus6
- umass0: <Kingston DataTraveler 2.0, class 0/0, rev 2.00/2.00, addr 2> on usbus6
- umass0: SCSI over Bulk-Only; quirks = 0x0000
- umass0:1:0:-1: Attached to scbus1
- da0 at umass-sim0 bus 0 target 0 lun 0
- da0: <Kingston DataTraveler 2.0 1.00> Removable Direct Access SCSI-2 device
- da0: 40.000MB/s transfers
- da0: 15384MB (31506432 512 byte sectors: 255H 63S/T 1961C)
- GEOM: da0: partition 1 does not start on a track boundary.
- GEOM: da0: partition 1 does not end on a track boundary.
- ugen6.2: <Kingston> at usbus6 (disconnected)
- umass0: at uhub6, port 1, addr 2 (disconnected)
- (da0:umass-sim0:0:0:0): lost device
- (da0:umass-sim0:0:0:0): removing device entry
- ugen6.2: <Kingston> at usbus6
- umass0: <Kingston DataTraveler 2.0, class 0/0, rev 2.00/2.00, addr 2> on usbus6
- umass0: SCSI over Bulk-Only; quirks = 0x0000
- umass0:1:0:-1: Attached to scbus1
- da0 at umass-sim0 bus 0 target 0 lun 0
- da0: <Kingston DataTraveler 2.0 1.00> Removable Direct Access SCSI-2 device
- da0: 40.000MB/s transfers
- da0: 15384MB (31506432 512 byte sectors: 255H 63S/T 1961C)
- GEOM: da0: partition 1 does not start on a track boundary.
- GEOM: da0: partition 1 does not end on a track boundary.
- ugen6.2: <Kingston> at usbus6 (disconnected)
- umass0: at uhub6, port 1, addr 2 (disconnected)
- (da0:umass-sim0:0:0:0): lost device
- (da0:umass-sim0:0:0:0): removing device entry
- ugen6.2: <Kingston> at usbus6
- umass0: <Kingston DataTraveler 2.0, class 0/0, rev 2.00/2.00, addr 2> on usbus6
- umass0: SCSI over Bulk-Only; quirks = 0x0000
- umass0:1:0:-1: Attached to scbus1
- da0 at umass-sim0 bus 0 target 0 lun 0
- da0: <Kingston DataTraveler 2.0 1.00> Removable Direct Access SCSI-2 device
- da0: 40.000MB/s transfers
- da0: 15384MB (31506432 512 byte sectors: 255H 63S/T 1961C)
- GEOM: da0: partition 1 does not start on a track boundary.
- GEOM: da0: partition 1 does not end on a track boundary.
- ugen6.2: <Kingston> at usbus6 (disconnected)
- umass0: at uhub6, port 1, addr 2 (disconnected)
- (da0:umass-sim0:0:0:0): lost device
- (da0:umass-sim0:0:0:0): removing device entry
- ugen6.2: <Kingston> at usbus6
- umass0: <Kingston DataTraveler 2.0, class 0/0, rev 2.00/2.00, addr 2> on usbus6
- umass0: SCSI over Bulk-Only; quirks = 0x0000
- umass0:1:0:-1: Attached to scbus1
- da0 at umass-sim0 bus 0 target 0 lun 0
- da0: <Kingston DataTraveler 2.0 1.00> Removable Direct Access SCSI-2 device
- da0: 40.000MB/s transfers
- da0: 15384MB (31506432 512 byte sectors: 255H 63S/T 1961C)
- GEOM: da0: partition 1 does not start on a track boundary.
- GEOM: da0: partition 1 does not end on a track boundary.
- ugen6.2: <Kingston> at usbus6 (disconnected)
- umass0: at uhub6, port 1, addr 2 (disconnected)
- (da0:umass-sim0:0:0:0): lost device
- (da0:umass-sim0:0:0:0): removing device entry
- ugen6.2: <Kingston> at usbus6
- umass0: <Kingston DataTraveler 2.0, class 0/0, rev 2.00/2.00, addr 2> on usbus6
- umass0: SCSI over Bulk-Only; quirks = 0x0000
- umass0:1:0:-1: Attached to scbus1
- da0 at umass-sim0 bus 0 target 0 lun 0
- da0: <Kingston DataTraveler 2.0 1.00> Removable Direct Access SCSI-2 device
- da0: 40.000MB/s transfers
- da0: 15384MB (31506432 512 byte sectors: 255H 63S/T 1961C)
- GEOM: da0: partition 1 does not start on a track boundary.
- GEOM: da0: partition 1 does not end on a track boundary.
- pid 4749 (nautilus), uid 1000: exited on signal 11
- ugen6.2: <Kingston> at usbus6 (disconnected)
- umass0: at uhub6, port 1, addr 2 (disconnected)
- (da0:umass-sim0:0:0:0): lost device
- (da0:umass-sim0:0:0:0): removing device entry
- ugen6.2: <Kingston> at usbus6
- umass0: <Kingston DataTraveler 2.0, class 0/0, rev 2.00/2.00, addr 2> on usbus6
- umass0: SCSI over Bulk-Only; quirks = 0x0000
- umass0:1:0:-1: Attached to scbus1
- da0 at umass-sim0 bus 0 target 0 lun 0
- da0: <Kingston DataTraveler 2.0 1.00> Removable Direct Access SCSI-2 device
- da0: 40.000MB/s transfers
- da0: 15384MB (31506432 512 byte sectors: 255H 63S/T 1961C)
- GEOM: da0: partition 1 does not start on a track boundary.
- GEOM: da0: partition 1 does not end on a track boundary.
- ugen6.2: <Kingston> at usbus6 (disconnected)
- umass0: at uhub6, port 1, addr 2 (disconnected)
- (da0:umass-sim0:0:0:0): lost device
- (da0:umass-sim0:0:0:0): removing device entry
- ugen6.2: <Kingston> at usbus6
- umass0: <Kingston DataTraveler 2.0, class 0/0, rev 2.00/2.00, addr 2> on usbus6
- umass0: SCSI over Bulk-Only; quirks = 0x0000
- umass0:1:0:-1: Attached to scbus1
- da0 at umass-sim0 bus 0 target 0 lun 0
- da0: <Kingston DataTraveler 2.0 1.00> Removable Direct Access SCSI-2 device
- da0: 40.000MB/s transfers
- da0: 15384MB (31506432 512 byte sectors: 255H 63S/T 1961C)
- GEOM: da0: partition 1 does not start on a track boundary.
- GEOM: da0: partition 1 does not end on a track boundary.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement