Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] BIOS EBDA/lowmem at: 00000000/000a0c00
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 2.6.28-11-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009 (Ubuntu 2.6.28-11.42-generic)
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] Intel GenuineIntel
- [ 0.000000] AMD AuthenticAMD
- [ 0.000000] NSC Geode by NSC
- [ 0.000000] Cyrix CyrixInstead
- [ 0.000000] Centaur CentaurHauls
- [ 0.000000] Transmeta GenuineTMx86
- [ 0.000000] Transmeta TransmetaCPU
- [ 0.000000] UMC UMC UMC UMC
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
- [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
- [ 0.000000] BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
- [ 0.000000] BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
- [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
- [ 0.000000] DMI 2.1 present.
- [ 0.000000] last_pfn = 0xfff0 max_arch_pfn = 0x100000
- [ 0.000000] Scanning 2 areas for low memory corruption
- [ 0.000000] modified physical RAM map:
- [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
- [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
- [ 0.000000] modified: 0000000000006000 - 0000000000007000 (usable)
- [ 0.000000] modified: 0000000000007000 - 0000000000010000 (reserved)
- [ 0.000000] modified: 0000000000010000 - 0000000000093000 (usable)
- [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
- [ 0.000000] modified: 0000000000100000 - 000000000fff0000 (usable)
- [ 0.000000] modified: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
- [ 0.000000] modified: 000000000fff3000 - 0000000010000000 (ACPI data)
- [ 0.000000] modified: 00000000ffff0000 - 0000000100000000 (reserved)
- [ 0.000000] kernel direct mapping tables up to fff0000 @ 10000-16000
- [ 0.000000] RAMDISK: 0fab0000 - 0ffbf557
- [ 0.000000] ACPI: RSDP 000F6E30, 0014 (r0 MSI )
- [ 0.000000] ACPI: RSDT 0FFF3000, 0028 (r1 MSI AWRDACPI 0 0)
- [ 0.000000] ACPI: FACP 0FFF3040, 0074 (r1 MSI AWRDACPI 0 0)
- [ 0.000000] ACPI: DSDT 0FFF30C0, 1DA8 (r1 MSI AWRDACPI 1000 MSFT 1000007)
- [ 0.000000] ACPI: FACS 0FFF0000, 0040
- [ 0.000000] ACPI: BIOS age (1998) fails cutoff (2000), acpi=force is required to enable ACPI
- [ 0.000000] ACPI: acpi=force override
- [ 0.000000] 0MB HIGHMEM available.
- [ 0.000000] 255MB LOWMEM available.
- [ 0.000000] mapped low ram: 0 - 0fff0000
- [ 0.000000] low ram: 00000000 - 0fff0000
- [ 0.000000] bootmap 00012000 - 00014000
- [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 000fff0000]
- [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
- [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
- [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
- [ 0.000000] #3 [0000100000 - 000087c52c] TEXT DATA BSS ==> [0000100000 - 000087c52c]
- [ 0.000000] #4 [000fab0000 - 000ffbf557] RAMDISK ==> [000fab0000 - 000ffbf557]
- [ 0.000000] #5 [000087d000 - 0000881000] INIT_PG_TABLE ==> [000087d000 - 0000881000]
- [ 0.000000] #6 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
- [ 0.000000] #7 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
- [ 0.000000] #8 [0000012000 - 0000014000] BOOTMAP ==> [0000012000 - 0000014000]
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0x00000000 -> 0x00001000
- [ 0.000000] Normal 0x00001000 -> 0x0000fff0
- [ 0.000000] HighMem 0x0000fff0 -> 0x0000fff0
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[4] active PFN ranges
- [ 0.000000] 0: 0x00000000 -> 0x00000002
- [ 0.000000] 0: 0x00000006 -> 0x00000007
- [ 0.000000] 0: 0x00000010 -> 0x00000093
- [ 0.000000] 0: 0x00000100 -> 0x0000fff0
- [ 0.000000] On node 0 totalpages: 65398
- [ 0.000000] free_area_init_node: node 0, pgdat c06d0f80, node_mem_map c1000000
- [ 0.000000] DMA zone: 32 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 3942 pages, LIFO batch:0
- [ 0.000000] Normal zone: 480 pages used for memmap
- [ 0.000000] Normal zone: 60944 pages, LIFO batch:15
- [ 0.000000] HighMem zone: 0 pages used for memmap
- [ 0.000000] Movable zone: 0 pages used for memmap
- [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
- [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
- [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
- [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
- [ 0.000000] PM: Registered nosave memory: 0000000000007000 - 0000000000010000
- [ 0.000000] PM: Registered nosave memory: 0000000000093000 - 00000000000f0000
- [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
- [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 10000000:efff0000)
- [ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data
- [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 1, nr_node_ids 1
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64886
- [ 0.000000] Kernel command line: BOOT_IMAGE=vmlinuz ro initrd=initrd.img acpi=force raid=noautodetect
- [ 0.000000] Initializing CPU#0
- [ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
- [ 0.000000] Fast TSC calibration using PIT
- [ 0.000000] Detected 233.881 MHz processor.
- [ 0.004000] Console: colour VGA+ 80x25
- [ 0.004000] console [tty0] enabled
- [ 0.004000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.004000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
- [ 0.004000] allocated 1310400 bytes of page_cgroup
- [ 0.004000] please try cgroup_disable=memory option if you don't want
- [ 0.004000] Scanning for low memory corruption every 60 seconds
- [ 0.004000] Memory: 244844k/262080k available (4126k kernel code, 16492k reserved, 2208k data, 532k init, 0k highmem)
- [ 0.004000] virtual kernel memory layout:
- [ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
- [ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
- [ 0.004000] vmalloc : 0xd07f0000 - 0xff3fe000 ( 748 MB)
- [ 0.004000] lowmem : 0xc0000000 - 0xcfff0000 ( 255 MB)
- [ 0.004000] .init : 0xc0737000 - 0xc07bc000 ( 532 kB)
- [ 0.004000] .data : 0xc0507a6f - 0xc072fe60 (2208 kB)
- [ 0.004000] .text : 0xc0100000 - 0xc0507a6f (4126 kB)
- [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
- [ 0.004000] SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- [ 0.004060] Calibrating delay loop (skipped), value calculated using timer frequency.. 467.76 BogoMIPS (lpj=935524)
- [ 0.004404] Security Framework initialized
- [ 0.004557] SELinux: Disabled at boot.
- [ 0.004819] AppArmor: AppArmor initialized
- [ 0.004985] Mount-cache hash table entries: 512
- [ 0.006127] Initializing cgroup subsys ns
- [ 0.006249] Initializing cgroup subsys cpuacct
- [ 0.006357] Initializing cgroup subsys memory
- [ 0.006476] Initializing cgroup subsys freezer
- [ 0.006680] CPU: L1 I cache: 16K, L1 D cache: 16K
- [ 0.006842] CPU: L2 cache: 512K
- [ 0.007024] Checking 'hlt' instruction... OK.
- [ 0.020432] SMP alternatives: switching to UP code
- [ 1.222867] Freeing SMP alternatives: 18k freed
- [ 1.223009] ACPI: Core revision 20080926
- [ 1.225307] ACPI: Checking initramfs for custom DSDT
- [ 2.979283] ACPI: setting ELCR to 0200 (from 8800)
- [ 2.980434] weird, boot CPU (#0) not listedby the BIOS.
- [ 2.980549] SMP motherboard not detected.
- [ 2.980650] Local APIC not detected. Using dummy APIC emulation.
- [ 2.980755] SMP disabled
- [ 2.984224] Brought up 1 CPUs
- [ 2.984333] Total of 1 processors activated (467.76 BogoMIPS).
- [ 2.984515] CPU0 attaching NULL sched-domain.
- [ 2.986739] net_namespace: 776 bytes
- [ 2.986945] Booting paravirtualized kernel on bare hardware
- [ 2.989342] Time: 11:03:19 Date: 07/30/09
- [ 2.989478] regulator: core version 0.5
- [ 2.989844] NET: Registered protocol family 16
- [ 2.991127] EISA bus registered
- [ 2.991318] ACPI: bus type pci registered
- [ 3.024700] PCI: PCI BIOS revision 2.10 entry at 0xfb300, last bus=1
- [ 3.024820] PCI: Using configuration type 1 for base access
- [ 3.037863] ACPI: EC: Look up EC in DSDT
- [ 3.056903] ACPI: Interpreter enabled
- [ 3.057050] ACPI: (supports S0 S1 S4 S5)
- [ 3.057479] ACPI: Using PIC for interrupt routing
- [ 3.079738] ACPI: No dock devices found.
- [ 3.079927] ACPI: PCI Root Bridge [PCI0] (0000:00)
- [ 3.080359] pci 0000:00:00.0: reg 10 32bit mmio: [0xe7000000-0xe73fffff]
- [ 3.080808] pci 0000:00:07.1: reg 20 io port: [0xf000-0xf00f]
- [ 3.080969] pci 0000:00:07.2: reg 20 io port: [0xe000-0xe01f]
- [ 3.081065] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
- [ 3.081080] * this clock source is slow. Consider trying other clock sources
- [ 3.081419] pci 0000:00:07.3: quirk: region 4000-403f claimed by PIIX4 ACPI
- [ 3.081544] pci 0000:00:07.3: quirk: region 5000-500f claimed by PIIX4 SMB
- [ 3.081784] pci 0000:00:0e.0: reg 10 io port: [0xe400-0xe47f]
- [ 3.081822] pci 0000:00:0e.0: reg 14 32bit mmio: [0xe7400000-0xe740007f]
- [ 3.081900] pci 0000:00:0e.0: reg 30 32bit mmio: [0xe6000000-0xe601ffff]
- [ 3.081947] pci 0000:00:0e.0: supports D1 D2
- [ 3.081970] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot
- [ 3.082089] pci 0000:00:0e.0: PME# disabled
- [ 3.082372] pci 0000:01:00.0: reg 10 32bit mmio: [0xe0000000-0xe3ffffff]
- [ 3.082412] pci 0000:01:00.0: reg 14 io port: [0xd000-0xd0ff]
- [ 3.082448] pci 0000:01:00.0: reg 18 32bit mmio: [0xe5000000-0xe5003fff]
- [ 3.082518] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
- [ 3.082569] pci 0000:01:00.0: supports D1
- [ 3.082697] pci 0000:00:01.0: bridge io port: [0xd000-0xdfff]
- [ 3.082727] pci 0000:00:01.0: bridge 32bit mmio: [0xe4000000-0xe5ffffff]
- [ 3.082759] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe0000000-0xe3ffffff]
- [ 3.082800] bus 00 -> node 0
- [ 3.082866] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 3.091479] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 *15)
- [ 3.093888] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
- [ 3.096210] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
- [ 3.098723] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
- [ 3.100731] ACPI: WMI: Mapper loaded
- [ 3.102478] SCSI subsystem initialized
- [ 3.103084] libata version 3.00 loaded.
- [ 3.103639] usbcore: registered new interface driver usbfs
- [ 3.103902] usbcore: registered new interface driver hub
- [ 3.104369] usbcore: registered new device driver usb
- [ 3.105815] PCI: Using ACPI for IRQ routing
- [ 3.106377] Bluetooth: Core ver 2.13
- [ 3.106377] NET: Registered protocol family 31
- [ 3.108031] Bluetooth: HCI device and connection manager initialized
- [ 3.108155] Bluetooth: HCI socket layer initialized
- [ 3.108260] NET: Registered protocol family 8
- [ 3.108357] NET: Registered protocol family 20
- [ 3.108568] NetLabel: Initializing
- [ 3.108668] NetLabel: domain hash size = 128
- [ 3.108763] NetLabel: protocols = UNLABELED CIPSOv4
- [ 3.108971] NetLabel: unlabeled traffic allowed by default
- [ 3.109682] AppArmor: AppArmor Filesystem Enabled
- [ 3.109889] pnp: PnP ACPI init
- [ 3.109889] ACPI: bus type pnp registered
- [ 3.130005] pnp: PnP ACPI: found 11 devices
- [ 3.130114] ACPI: ACPI bus type pnp unregistered
- [ 3.130231] PnPBIOS: Disabled by ACPI PNP
- [ 3.130399] system 00:01: iomem range 0x0-0x9ffff could not be reserved
- [ 3.130527] system 00:01: iomem range 0xf0000-0xf3fff could not be reserved
- [ 3.130649] system 00:01: iomem range 0xf4000-0xf7fff could not be reserved
- [ 3.130770] system 00:01: iomem range 0xf8000-0xfffff could not be reserved
- [ 3.130890] system 00:01: iomem range 0xc8800-0xcbfff has been reserved
- [ 3.131010] system 00:01: iomem range 0x100000-0xffeffff could not be reserved
- [ 3.131146] system 00:01: iomem range 0xfff0000-0xfffffff could not be reserved
- [ 3.131284] system 00:01: iomem range 0xffff0000-0xffffffff has been reserved
- [ 3.131447] system 00:02: ioport range 0x3f0-0x3f1 has been reserved
- [ 3.131569] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
- [ 3.168198] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
- [ 3.168324] pci 0000:00:01.0: IO window: 0xd000-0xdfff
- [ 3.168441] pci 0000:00:01.0: MEM window: 0xe4000000-0xe5ffffff
- [ 3.168560] pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000e3ffffff
- [ 3.168736] bus: 00 index 0 io port: [0x00-0xffff]
- [ 3.168844] bus: 00 index 1 mmio: [0x000000-0xffffffff]
- [ 3.168949] bus: 01 index 0 io port: [0xd000-0xdfff]
- [ 3.169053] bus: 01 index 1 mmio: [0xe4000000-0xe5ffffff]
- [ 3.169158] bus: 01 index 2 mmio: [0xe0000000-0xe3ffffff]
- [ 3.169262] bus: 01 index 3 mmio: [0x0-0x0]
- [ 3.169415] NET: Registered protocol family 2
- [ 3.170692] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
- [ 3.173339] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
- [ 3.173928] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
- [ 3.174476] TCP: Hash tables configured (established 8192 bind 8192)
- [ 3.174589] TCP reno registered
- [ 3.175393] NET: Registered protocol family 1
- [ 3.176667] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0
- [ 4.921365] it is
- [ 6.946257] Freeing initrd memory: 5181k freed
- [ 6.946769] cpufreq: No nForce2 chipset.
- [ 6.947985] audit: initializing netlink socket (disabled)
- [ 6.948326] type=2000 audit(1248951802.948:1): initialized
- [ 7.018979] HugeTLB registered 4 MB page size, pre-allocated 0 pages
- [ 7.034202] VFS: Disk quotas dquot_6.5.1
- [ 7.034912] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 7.043351] fuse init (API version 7.10)
- [ 7.044514] msgmni has been set to 488
- [ 7.046488] alg: No test for stdrng (krng)
- [ 7.046744] io scheduler noop registered
- [ 7.046850] io scheduler anticipatory registered
- [ 7.046949] io scheduler deadline registered
- [ 7.047260] io scheduler cfq registered (default)
- [ 7.047439] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
- [ 7.047672] pci 0000:01:00.0: Boot video device
- [ 7.064121] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 7.064320] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
- [ 7.065426] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
- [ 7.065575] ACPI: Power Button (FF) [PWRF]
- [ 7.066125] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
- [ 7.066277] ACPI: Power Button (CM) [PWRB]
- [ 7.066753] fan PNP0C0B:00: registered as cooling_device0
- [ 7.066906] ACPI: Fan [FAN0] (on)
- [ 7.068130] ACPI: CPU0 (power states: C1[C1] C2[C2])
- [ 7.068544] processor ACPI_CPU:00: registered as cooling_device1
- [ 7.068681] ACPI: Processor [CPU0] (supports 8 throttling states)
- [ 7.078694] isapnp: Scanning for PnP cards...
- [ 7.434081] isapnp: No Plug & Play device found
- [ 7.447453] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
- [ 7.447890] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 7.448438] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
- [ 7.450800] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 7.451682] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
- [ 7.459948] brd: module loaded
- [ 7.463715] loop: module loaded
- [ 7.464668] Fixed MDIO Bus: probed
- [ 7.464812] PPP generic driver version 2.4.2
- [ 7.465543] input: Macintosh mouse button emulation as /devices/virtual/input/input2
- [ 7.465948] Driver 'sd' needs updating - please use bus_type methods
- [ 7.466150] Driver 'sr' needs updating - please use bus_type methods
- [ 7.466838] ata_piix 0000:00:07.1: version 2.12
- [ 7.466894] ata_piix 0000:00:07.1: enabling device (0000 -> 0001)
- [ 7.468085] scsi0 : ata_piix
- [ 7.469117] scsi1 : ata_piix
- [ 7.469604] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
- [ 7.469730] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
- [ 7.470003] ata1: port disabled. ignoring.
- [ 7.470192] ata2: port disabled. ignoring.
- [ 7.476573] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 7.476910] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 7.477173] uhci_hcd: USB Universal Host Controller Interface driver
- [ 7.481115] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
- [ 7.481240] PCI: setting IRQ 11 as level-triggered
- [ 7.481272] uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
- [ 7.481438] uhci_hcd 0000:00:07.2: UHCI Host Controller
- [ 7.482193] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
- [ 7.482421] uhci_hcd 0000:00:07.2: irq 11, io base 0x0000e000
- [ 7.483390] usb usb1: configuration #1 chosen from 1 choice
- [ 7.483778] hub 1-0:1.0: USB hub found
- [ 7.483964] hub 1-0:1.0: 2 ports detected
- [ 7.485389] usbcore: registered new interface driver libusual
- [ 7.485798] usbcore: registered new interface driver usbserial
- [ 7.486009] USB Serial support registered for generic
- [ 7.486239] usbcore: registered new interface driver usbserial_generic
- [ 7.486359] usbserial: USB Serial Driver core
- [ 7.486834] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
- [ 7.486956] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
- [ 7.488129] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 7.489269] mice: PS/2 mouse device common for all mice
- [ 7.491135] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
- [ 7.491317] rtc0: alarms up to one month, 242 bytes nvram
- [ 7.492252] device-mapper: uevent: version 1.0.3
- [ 7.493469] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
- [ 7.494252] device-mapper: multipath: version 1.0.5 loaded
- [ 7.494374] device-mapper: multipath round-robin: version 1.0.0 loaded
- [ 7.495408] EISA: Probing bus 0 at eisa.0
- [ 7.495575] Cannot allocate resource for EISA slot 4
- [ 7.495681] Cannot allocate resource for EISA slot 5
- [ 7.495817] EISA: Detected 0 cards.
- [ 7.496575] cpuidle: using governor ladder
- [ 7.497106] cpuidle: using governor menu
- [ 7.502795] TCP cubic registered
- [ 7.504242] NET: Registered protocol family 10
- [ 7.508799] lo: Disabled Privacy Extensions
- [ 7.512439] NET: Registered protocol family 17
- [ 7.512708] Bluetooth: L2CAP ver 2.11
- [ 7.512813] Bluetooth: L2CAP socket layer initialized
- [ 7.512929] Bluetooth: SCO (Voice Link) ver 0.6
- [ 7.513030] Bluetooth: SCO socket layer initialized
- [ 7.513431] Bluetooth: RFCOMM socket layer initialized
- [ 7.513592] Bluetooth: RFCOMM TTY layer initialized
- [ 7.513697] Bluetooth: RFCOMM ver 1.10
- [ 7.514118] IO APIC resources could be not be allocated.
- [ 7.514238] Using IPI No-Shortcut mode
- [ 7.515085] registered taskstats version 1
- [ 7.515843] Magic number: 1:938:75
- [ 7.516299] rtc_cmos 00:04: setting system clock to 2009-07-30 11:03:23 UTC (1248951803)
- [ 7.516449] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
- [ 7.516554] EDD information not available.
- [ 7.520829] Freeing unused kernel memory: 532k freed
- [ 7.522127] Write protecting the kernel text: 4128k
- [ 7.522594] Write protecting the kernel read-only data: 1532k
- [ 7.804273] usb 1-1: new full speed USB device using uhci_hcd and address 2
- [ 7.980834] compcache: Compressed swap size set to: 62708 KB
- [ 7.982581] TLSF: pool: d08a2000, init_size=16384, max_size=0, grow_size=16384
- [ 8.005031] usb 1-1: configuration #1 chosen from 1 choice
- [ 8.014837] hub 1-1:1.0: USB hub found
- [ 8.016826] hub 1-1:1.0: 4 ports detected
- [ 8.135659] Marking TSC unstable due to TSC halts in idle
- [ 8.313747] usb 1-1.1: new low speed USB device using uhci_hcd and address 3
- [ 8.448334] usb 1-1.1: configuration #1 chosen from 1 choice
- [ 8.525668] usb 1-1.3: new low speed USB device using uhci_hcd and address 4
- [ 8.681602] usb 1-1.3: configuration #1 chosen from 1 choice
- [ 8.829129] nbd: registered device at major 43
- [ 8.871427] squashfs: version 3.3 (2007/10/31) Phillip Lougher
- [ 8.961684] aufs 20080922
- [ 9.950104] usbcore: registered new interface driver hiddev
- [ 9.982246] input: No brand 2Port KVMSwicther as /devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1.3/1-1.3:1.0/input/input3
- [ 10.012902] generic-usb 0003:10D5:55A2.0003: input,hidraw0: USB HID v1.10 Keyboard [No brand 2Port KVMSwicther] on usb-0000:00:07.2-1.3/input0
- [ 10.014155] usbhid 1-1.3:1.1: couldn't find an input interrupt endpoint
- [ 10.014407] usbcore: registered new interface driver usbhid
- [ 10.014535] usbhid: v2.6:USB HID core driver
- [ 10.192004] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 15
- [ 10.192241] PCI: setting IRQ 15 as level-triggered
- [ 10.192276] 3c59x 0000:00:0e.0: PCI INT A -> Link[LNKA] -> GSI 15 (level, low) -> IRQ 15
- [ 10.193238] 3c59x: Donald Becker and others.
- [ 10.199844] 0000:00:0e.0: 3Com PCI 3c905C Tornado at d0dbc000.
- [ 11.883196] Adding 62704k swap on /dev/ramzswap0. Priority:100 extents:1 across:62704k
- [ 12.553153] input: Generic USB K/B as /devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1.1/1-1.1:1.0/input/input4
- [ 12.584871] dell 0003:13BA:0017.0001: input,hidraw1: USB HID v1.10 Keyboard [Generic USB K/B] on usb-0000:00:07.2-1.1/input0
- [ 12.610115] input: Generic USB K/B as /devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1.1/1-1.1:1.1/input/input5
- [ 12.656848] dell 0003:13BA:0017.0002: input,hidraw2: USB HID v1.10 Mouse [Generic USB K/B] on usb-0000:00:07.2-1.1/input1
- [ 12.804161] eth0: setting full-duplex.
- [ 14.937683] nbd0: unknown partition table
- [ 14.996153] aufs test_add:423:exe[650]: uid/gid/perm /rofs 0/0/0755, 0/0/01777
- [ 17.958307] udev: starting version 141
- [ 19.306735] Linux agpgart interface v0.103
- [ 19.449634] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- [ 19.751791] agpgart-intel 0000:00:00.0: Intel 440BX Chipset
- [ 19.818251] agpgart-intel 0000:00:00.0: AGP aperture is 4M @ 0xe7000000
- [ 19.905600] parport_pc 00:09: reported by Plug and Play ACPI
- [ 19.905962] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
- [ 20.481529] piix4_smbus 0000:00:07.3: SMBus Host Controller at 0x5000, revision 0
- [ 20.859157] input: PC Speaker as /devices/platform/pcspkr/input/input6
- [ 23.548102] eth0: no IPv6 routers present
- [ 40.652970] ppdev: user-space parallel port driver
- [ 41.409823] lp0: using parport0 (interrupt-driven).
- [ 41.964840] nbd0: NBD_DISCONNECT
- [ 41.966252] nbd0: Receive control failed (result -32)
- [ 41.966552] nbd0: queue cleared
- [ 41.997293] nbd0: Attempted send on closed socket
- [ 41.997440] end_request: I/O error, dev nbd0, sector 378346
- [ 42.003480] SQUASHFS error: sb_bread failed reading block 0x2e2f5
- [ 42.003608] SQUASHFS error: Unable to read cache block [b8bd568:1a41]
- [ 42.003921] SQUASHFS error: Unable to read inode [b8bd568:1a41]
- [ 76.673783] [drm] Initialized drm 1.1.0 20060810
- [ 76.747667] pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 15 (level, low) -> IRQ 15
- [ 76.752811] [drm] Initialized r128 2.5.0 20030725 on minor 0
- [ 76.964560] agpgart-intel 0000:00:00.0: AGP 1.0 bridge
- [ 76.964664] agpgart-intel 0000:00:00.0: putting AGP V2 device into 1x mode
- [ 76.964764] pci 0000:01:00.0: putting AGP V2 device into 1x mode
- [ 85.923452] nbd9: unknown partition table
- [ 86.038570] nbd9: NBD_DISCONNECT
- [ 86.039925] nbd9: Receive control failed (result -32)
- [ 86.043099] nbd9: queue cleared
- [ 101.088323] usb 1-1: USB disconnect, address 2
- [ 101.088361] usb 1-1.1: USB disconnect, address 3
- [ 101.214882] usb 1-1.3: USB disconnect, address 4
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement