Pastebin launched a little side project called VERYVIRAL.com, check it out ;-) Want more features on Pastebin? Sign Up, it's FREE!
Guest

Torben Viets

By: a guest on Apr 28th, 2008  |  syntax: None  |  size: 30.84 KB  |  views: 30  |  expires: Never
download  |  raw  |  embed  |  report abuse  |  print
This paste has a previous version, view the difference. Text below is selected. Please press Ctrl+C to copy to your clipboard. (⌘+C on Mac)
  1. cx23885                90132  0
  2. i2o_core               40532  0
  3. xt_TCPMSS               4416  1
  4. xt_tcpmss               2176  1
  5. iptable_mangle          3392  1
  6. ipt_MASQUERADE          3520  1
  7. xt_tcpudp               3136  13
  8. pppoe                  13376  2
  9. pppox                   4300  1 pppoe
  10. xt_mark                 2048  1
  11. xt_state                2432  1
  12. iptable_nat             6472  1
  13. nf_nat                 18896  2 ipt_MASQUERADE,iptable_nat
  14. nf_conntrack_ipv4      10056  4 iptable_nat,nf_nat
  15. iptable_filter          3392  1
  16. ip_tables              12816  3 iptable_mangle,iptable_nat,iptable_filter
  17. x_tables               17028  8 xt_TCPMSS,xt_tcpmss,ipt_MASQUERADE,xt_tcpudp,xt_mark,xt_state,iptable_nat,ip_tables
  18. af_packet              21952  4
  19. ppp_generic            24212  6 pppoe,pppox
  20. slhc                    6336  1 ppp_generic
  21. twofish_i586            5632  3
  22. twofish_common         14528  1 twofish_i586
  23. aes_i586                8128  0
  24. via_rng                 2240  0
  25. usblp                  14720  0
  26. arc4                    1920  2
  27. tda10048                9028  0
  28. cx25840                29644  0
  29. ath5k                  99776  0
  30. usbhid                 31424  0
  31. mac80211              138636  1 ath5k
  32. cfg80211               26184  2 ath5k,mac80211
  33. videodev               33344  1 cx23885
  34. compat_ioctl32          1216  1 cx23885
  35. cx2341x                12420  1 cx23885
  36. videobuf_dma_sg        13700  1 cx23885
  37. v4l1_compat            14788  2 cx23885,videodev
  38. v4l2_common            11520  3 cx23885,cx25840,cx2341x
  39. btcx_risc               4808  1 cx23885
  40. tveeprom               12420  1 cx23885
  41. i2c_core               24784  5 cx23885,tda10048,cx25840,v4l2_common,tveeprom
  42. videobuf_dvb            6660  1 cx23885
  43. dvb_core               79552  1 videobuf_dvb
  44. sr_mod                 16868  0
  45. videobuf_core          18756  3 cx23885,videobuf_dma_sg,videobuf_dvb
  46.  
  47.  
  48.  
  49.  
  50.  
  51.  
  52.  
  53.  
  54.  
  55. complete dmesg:
  56.  
  57. BIOS-provided physical RAM map:
  58.  BIOS-e820: 0000000000000000 - 000000000009b400 (usable)
  59.  BIOS-e820: 000000000009b400 - 00000000000a0000 (reserved)
  60.  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
  61.  BIOS-e820: 0000000000100000 - 000000005bea0000 (usable)
  62.  BIOS-e820: 000000005bea0000 - 000000005beae000 (ACPI data)
  63.  BIOS-e820: 000000005beae000 - 000000005bee0000 (ACPI NVS)
  64.  BIOS-e820: 000000005bee0000 - 000000005beee000 (reserved)
  65.  BIOS-e820: 000000005bef0000 - 000000005bf00000 (reserved)
  66.  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
  67.  BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved)
  68.  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
  69.  BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
  70. x86: PAT support disabled.
  71. 574MB HIGHMEM available.
  72. 896MB LOWMEM available.
  73. found SMP MP-table at [c00ff780] 000ff780
  74. Entering add_active_range(0, 0, 376480) 0 entries of 256 used
  75. Zone PFN ranges:
  76.   DMA             0 ->     4096
  77.   Normal       4096 ->   229376
  78.   HighMem    229376 ->   376480
  79. Movable zone start PFN for each node
  80. early_node_map[1] active PFN ranges
  81.     0:        0 ->   376480
  82. On node 0 totalpages: 376480
  83.   DMA zone: 32 pages used for memmap
  84.   DMA zone: 0 pages reserved
  85.   DMA zone: 4064 pages, LIFO batch:0
  86.   Normal zone: 1760 pages used for memmap
  87.   Normal zone: 223520 pages, LIFO batch:31
  88.   HighMem zone: 1149 pages used for memmap
  89.   HighMem zone: 145955 pages, LIFO batch:31
  90.   Movable zone: 0 pages used for memmap
  91. DMI present.
  92. ACPI: RSDP 000F9810, 0024 (r2 ACPIAM)
  93. ACPI: XSDT 5BEA0100, 004C (r1 082107 XSDT1458 20070821 MSFT       97)
  94. ACPI: FACP 5BEA0290, 00F4 (r3 082107 FACP1458 20070821 MSFT       97)
  95. ACPI: DSDT 5BEA0430, 4018 (r1  1ADTQ 1ADTQ001        1 INTL 20051117)
  96. ACPI: FACS 5BEAE000, 0040
  97. ACPI: APIC 5BEA0390, 0060 (r1 082107 APIC1458 20070821 MSFT       97)
  98. ACPI: MCFG 5BEA03F0, 003C (r1 082107 OEMMCFG  20070821 MSFT       97)
  99. ACPI: OEMB 5BEAE040, 0061 (r1 082107 OEMB1458 20070821 MSFT       97)
  100. ACPI: SSDT 5BEAE0B0, 0175 (r1    AMI   P001PM        1 INTL 20051117)
  101. ACPI: PM-Timer IO Port: 0x808
  102. ACPI: Local APIC address 0xfee00000
  103. ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
  104. BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell your hw vendor)
  105. ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
  106. IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
  107. ACPI: IOAPIC (id[0x02] address[0xfecc0000] gsi_base[24])
  108. IOAPIC[1]: apic_id 2, version 3, address 0xfecc0000, GSI 24-47
  109. ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  110. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
  111. ACPI: IRQ0 used by override.
  112. ACPI: IRQ2 used by override.
  113. ACPI: IRQ9 used by override.
  114. Enabling APIC mode:  Flat.  Using 2 I/O APICs
  115. Using ACPI (MADT) for SMP configuration information
  116. Allocating PCI resources starting at 60000000 (gap: 5bf00000:a2d00000)
  117. Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 373539
  118. Kernel command line: root=/dev/sdd3 ro lockd.nlm_udpport=20000 lockd.nlm_tcpport=20000 usbcore.autosuspend=1 panic=30
  119. mapped APIC to ffffb000 (fee00000)
  120. mapped IOAPIC to ffffa000 (fec00000)
  121. mapped IOAPIC to ffff9000 (fecc0000)
  122. Enabling fast FPU save and restore... done.
  123. Enabling unmasked SIMD FPU exception support... done.
  124. Initializing CPU#0
  125. PID hash table entries: 4096 (order: 12, 16384 bytes)
  126. Extended CMOS year: 2000
  127. Detected 997.515 MHz processor.
  128. Console: colour VGA+ 80x25
  129. console [tty0] enabled
  130. Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  131. Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  132. Memory: 1487228k/1505920k available (3251k kernel code, 17540k reserved, 1044k data, 216k init, 588416k highmem)
  133. virtual kernel memory layout:
  134.     fixmap  : 0xfffa8000 - 0xfffff000   ( 348 kB)
  135.     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
  136.     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
  137.     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
  138.       .init : 0xc0536000 - 0xc056c000   ( 216 kB)
  139.       .data : 0xc042ce63 - 0xc0532078   (1044 kB)
  140.       .text : 0xc0100000 - 0xc042ce63   (3251 kB)
  141. Checking if this processor honours the WP bit even in supervisor mode...Ok.
  142. CPA: page pool initialized 1 of 1 pages preallocated
  143. Calibrating delay using timer specific routine.. 1996.07 BogoMIPS (lpj=998038)
  144. Mount-cache hash table entries: 512
  145. CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
  146. CPU: L2 Cache: 128K (64 bytes/line)
  147. Compat vDSO mapped to ffffe000.
  148. CPU: Centaur VIA Esther processor 1000MHz stepping 09
  149. Checking 'hlt' instruction... OK.
  150. Freeing SMP alternatives: 0k freed
  151. ACPI: Core revision 20070126
  152. ENABLING IO-APIC IRQs
  153. ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
  154. net_namespace: 480 bytes
  155. xor: automatically using best checksumming function: pIII_sse
  156.    pIII_sse  :  2140.000 MB/sec
  157. xor: using function: pIII_sse (2140.000 MB/sec)
  158. NET: Registered protocol family 16
  159. No dock devices found.
  160. ACPI: bus type pci registered
  161. PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
  162. PCI: Not using MMCONFIG.
  163. PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=130
  164. PCI: Using configuration type 1
  165. Setting up standard PCI resources
  166. ACPI: EC: Look up EC in DSDT
  167. ACPI: Interpreter enabled
  168. ACPI: (supports S0 S5)
  169. ACPI: Using IOAPIC for interrupt routing
  170. ACPI: Error attaching device data
  171. ACPI: PCI Root Bridge [PCI0] (0000:00)
  172. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  173. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
  174. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT]
  175. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP0._PRT]
  176. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
  177. ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
  178. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
  179. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
  180. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
  181. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
  182. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
  183. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
  184. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
  185. ACPI: Power Resource [SVPR] (on)
  186. ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] -  91, should be 90 [20070126]
  187. Linux Plug and Play Support v0.97 (c) Adam Belay
  188. pnp: PnP ACPI init
  189. ACPI: bus type pnp registered
  190. pnp: IRQ 3 override to edge, high
  191. pnp: PnP ACPI: found 12 devices
  192. ACPI: ACPI bus type pnp unregistered
  193. SCSI subsystem initialized
  194. libata version 3.00 loaded.
  195. usbcore: registered new interface driver usbfs
  196. usbcore: registered new interface driver hub
  197. usbcore: registered new device driver usb
  198. PCI: Using ACPI for IRQ routing
  199. PCI: Cannot allocate resource region 0 of device 0000:00:00.0
  200. system 00:07: ioport range 0x162e-0x162f has been reserved
  201. system 00:07: ioport range 0xa00-0xa7f has been reserved
  202. system 00:08: ioport range 0x3e0-0x3e7 has been reserved
  203. system 00:08: ioport range 0x4d0-0x4d1 has been reserved
  204. system 00:08: ioport range 0x800-0x87f has been reserved
  205. system 00:08: ioport range 0x400-0x41f has been reserved
  206. system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
  207. system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
  208. system 00:09: iomem range 0xfee00000-0xfee00fff could not be reserved
  209. system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
  210. system 00:0b: iomem range 0x0-0x9ffff could not be reserved
  211. system 00:0b: iomem range 0xc0000-0xcffff could not be reserved
  212. system 00:0b: iomem range 0xe0000-0xfffff could not be reserved
  213. system 00:0b: iomem range 0x100000-0x5befffff could not be reserved
  214. system 00:0b: iomem range 0xff780000-0xffffffff could not be reserved
  215. PCI: Bridge: 0000:00:01.0
  216.   IO window: disabled.
  217.   MEM window: 0xfb000000-0xfe7fffff
  218.   PREFETCH window: 0x00000000f4000000-0x00000000f7ffffff
  219. PCI: Bridge: 0000:00:02.0
  220.   IO window: disabled.
  221.   MEM window: 0xfe800000-0xfe9fffff
  222.   PREFETCH window: disabled.
  223. PCI: Bridge: 0000:00:03.0
  224.   IO window: e000-efff
  225.   MEM window: 0xfeb00000-0xfebfffff
  226.   PREFETCH window: disabled.
  227. PCI: Setting latency timer of device 0000:00:01.0 to 64
  228. ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 27
  229. PCI: Setting latency timer of device 0000:00:02.0 to 64
  230. ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 31
  231. PCI: Setting latency timer of device 0000:00:03.0 to 64
  232. NET: Registered protocol family 2
  233. IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  234. TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  235. TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
  236. TCP: Hash tables configured (established 131072 bind 65536)
  237. TCP reno registered
  238. NET: Registered protocol family 1
  239. eps: Detected VIA Model A C7
  240. eps: Current voltage = 1004mV
  241. eps: Current multiplier = 10
  242. eps: Highest voltage = 1004mV
  243. eps: Highest multiplier = 10
  244. eps: Lowest voltage = 956mV
  245. eps: Lowest multiplier = 8
  246. highmem bounce pool size: 64 pages
  247. Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  248. fuse init (API version 7.9)
  249. SGI XFS with security attributes, no debug enabled
  250. async_tx: api initialized (sync-only)
  251. io scheduler noop registered
  252. io scheduler cfq registered (default)
  253. PCI: VIA PCI bridge detected.Disabling DAC.
  254. pci 0000:01:00.0: Boot video device
  255. PCI: Setting latency timer of device 0000:00:02.0 to 64
  256. assign_interrupt_mode Found MSI capability
  257. Allocate Port Service[0000:00:02.0:pcie00]
  258. Allocate Port Service[0000:00:02.0:pcie02]
  259. PCI: Setting latency timer of device 0000:00:03.0 to 64
  260. assign_interrupt_mode Found MSI capability
  261. Allocate Port Service[0000:00:03.0:pcie00]
  262. Allocate Port Service[0000:00:03.0:pcie02]
  263. input: Power Button (FF) as /class/input/input0
  264. ACPI: Power Button (FF) [PWRF]
  265. input: Sleep Button (CM) as /class/input/input1
  266. ACPI: Sleep Button (CM) [SLPB]
  267. input: Power Button (CM) as /class/input/input2
  268. ACPI: Power Button (CM) [PWRB]
  269. ACPI: ACPI0007:00 is registered as cooling_device0
  270. ACPI: Processor [P001] (supports 16 throttling states)
  271. Generic RTC Driver v1.07
  272. Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
  273. Hangcheck: Using get_cycles().
  274. Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
  275. serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  276. 00:06: ttyS0 at I/O 0x3f8 (irq = 3) is a 16550A
  277. via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
  278. ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 23
  279. eth0: VIA Rhine II at 0xfafff400, 00:40:63:f2:a5:8d, IRQ 23.
  280. eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 4061.
  281. VIA Networking Velocity Family Gigabit Ethernet Adapter Driver Ver. 1.14
  282. Copyright (c) 2002, 2003 VIA Networking Technologies, Inc.
  283. Copyright (c) 2004 Red Hat Inc.
  284. ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 28 (level, low) -> IRQ 28
  285. PCI: Setting latency timer of device 0000:03:00.0 to 64
  286. eth1: VIA Networking Velocity Family Gigabit Ethernet Adapter
  287. eth1: Ethernet Address: 00:40:63:F2:A5:8E
  288. Uniform Multi-Platform E-IDE driver
  289. ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
  290. Driver 'sd' needs updating - please use bus_type methods
  291. ahci 0000:00:0f.0: version 3.0
  292. ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 21
  293. ahci 0000:00:0f.0: controller can't do NCQ, turning off CAP_NCQ
  294. ahci 0000:00:0f.0: controller can't do PMP, turning off CAP_PMP
  295. PCI: Disallowing DAC for device 0000:00:0f.0
  296. Switched to high resolution mode on CPU 0
  297. ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl SATA mode
  298. ahci 0000:00:0f.0: flags: 64bit pm led clo pio slum part
  299. scsi0 : ahci
  300. scsi1 : ahci
  301. scsi2 : ahci
  302. scsi3 : ahci
  303. ata1: SATA max UDMA/133 abar m1024@0xfafffc00 port 0xfafffd00 irq 221
  304. ata2: SATA max UDMA/133 abar m1024@0xfafffc00 port 0xfafffd80 irq 221
  305. ata3: SATA max UDMA/133 abar m1024@0xfafffc00 port 0xfafffe00 irq 221
  306. ata4: SATA max UDMA/133 abar m1024@0xfafffc00 port 0xfafffe80 irq 221
  307. ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  308. ata1.00: ATA-7: MAXTOR STM3250310AS, 3.AAC, max UDMA/133
  309. ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
  310. ata1.00: configured for UDMA/133
  311. ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  312. ata2.00: ATA-7: MAXTOR STM3250310AS, 3.AAA, max UDMA/133
  313. ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
  314. ata2.00: configured for UDMA/133
  315. ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  316. ata3.00: ATA-7: MAXTOR STM3250310AS, 3.AAC, max UDMA/133
  317. ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
  318. ata3.00: configured for UDMA/133
  319. ata4: SATA link down (SStatus 0 SControl 300)
  320. scsi 0:0:0:0: Direct-Access     ATA      MAXTOR STM325031 3.AA PQ: 0 ANSI: 5
  321. sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
  322. sd 0:0:0:0: [sda] Write Protect is off
  323. sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  324. sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  325. sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
  326. sd 0:0:0:0: [sda] Write Protect is off
  327. sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  328. sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  329.  sda: sda1 sda2 sda3 sda4 < sda5 >
  330. sd 0:0:0:0: [sda] Attached SCSI disk
  331. scsi 1:0:0:0: Direct-Access     ATA      MAXTOR STM325031 3.AA PQ: 0 ANSI: 5
  332. sd 1:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
  333. sd 1:0:0:0: [sdb] Write Protect is off
  334. sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
  335. sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  336. sd 1:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
  337. sd 1:0:0:0: [sdb] Write Protect is off
  338. sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
  339. sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  340.  sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 >
  341. sd 1:0:0:0: [sdb] Attached SCSI disk
  342. scsi 2:0:0:0: Direct-Access     ATA      MAXTOR STM325031 3.AA PQ: 0 ANSI: 5
  343. sd 2:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
  344. sd 2:0:0:0: [sdc] Write Protect is off
  345. sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
  346. sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  347. sd 2:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
  348. sd 2:0:0:0: [sdc] Write Protect is off
  349. sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
  350. sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  351.  sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 >
  352. sd 2:0:0:0: [sdc] Attached SCSI disk
  353. pata_via 0000:00:0f.1: version 0.3.3
  354. scsi4 : pata_via
  355. scsi5 : pata_via
  356. ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
  357. ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
  358. ata5.00: CFA: SanDisk SDCFX4-4096, HDX 4.20, max UDMA/66
  359. ata5.00: 8027712 sectors, multi 0: LBA
  360. ata5.01: ATAPI: LITE-ON DVDRW SOHW-1673S, JS01, max UDMA/66
  361. ata5.00: configured for UDMA/66
  362. ata5.01: configured for UDMA/66
  363. scsi 4:0:0:0: Direct-Access     ATA      SanDisk SDCFX4-4 HDX  PQ: 0 ANSI: 5
  364. sd 4:0:0:0: [sdd] 8027712 512-byte hardware sectors (4110 MB)
  365. sd 4:0:0:0: [sdd] Write Protect is off
  366. sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
  367. sd 4:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
  368. sd 4:0:0:0: [sdd] 8027712 512-byte hardware sectors (4110 MB)
  369. sd 4:0:0:0: [sdd] Write Protect is off
  370. sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
  371. sd 4:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
  372.  sdd: sdd1 sdd2 sdd3
  373. sd 4:0:0:0: [sdd] Attached SCSI removable disk
  374. scsi 4:0:1:0: CD-ROM            LITE-ON  DVDRW SOHW-1673S JS01 PQ: 0 ANSI: 5
  375. ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 22 (level, low) -> IRQ 22
  376. ehci_hcd 0000:00:10.4: EHCI Host Controller
  377. ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
  378. ehci_hcd 0000:00:10.4: debug port 1
  379. ehci_hcd 0000:00:10.4: irq 22, io mem 0xfafff800
  380. ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
  381. usb usb1: configuration #1 chosen from 1 choice
  382. hub 1-0:1.0: USB hub found
  383. hub 1-0:1.0: 4 ports detected
  384. USB Universal Host Controller Interface driver v3.0
  385. ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 20
  386. uhci_hcd 0000:00:10.0: UHCI Host Controller
  387. uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
  388. uhci_hcd 0000:00:10.0: irq 20, io base 0x0000d000
  389. usb usb2: configuration #1 chosen from 1 choice
  390. hub 2-0:1.0: USB hub found
  391. hub 2-0:1.0: 2 ports detected
  392. ACPI: PCI Interrupt 0000:00:10.1[C] -> GSI 22 (level, low) -> IRQ 22
  393. uhci_hcd 0000:00:10.1: UHCI Host Controller
  394. uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
  395. uhci_hcd 0000:00:10.1: irq 22, io base 0x0000d080
  396. usb usb3: configuration #1 chosen from 1 choice
  397. hub 3-0:1.0: USB hub found
  398. hub 3-0:1.0: 2 ports detected
  399. PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
  400. PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
  401. serio: i8042 KBD port at 0x60,0x64 irq 1
  402. mice: PS/2 mouse device common for all mice
  403. md: raid1 personality registered for level 1
  404. hub 1-0:1.0: unable to enumerate USB device on port 1
  405. raid6: int32x1    144 MB/s
  406. raid6: int32x2    175 MB/s
  407. raid6: int32x4    156 MB/s
  408. raid6: int32x8    109 MB/s
  409. raid6: mmxx1      324 MB/s
  410. raid6: mmxx2      496 MB/s
  411. input: AT Translated Set 2 keyboard as /class/input/input3
  412. raid6: sse1x1     292 MB/s
  413. raid6: sse1x2     441 MB/s
  414. raid6: sse2x1     542 MB/s
  415. raid6: sse2x2     679 MB/s
  416. raid6: using algorithm sse2x2 (679 MB/s)
  417. md: raid6 personality registered for level 6
  418. md: raid5 personality registered for level 5
  419. md: raid4 personality registered for level 4
  420. device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
  421. padlock: Using VIA PadLock ACE for AES algorithm.
  422. padlock: Using VIA PadLock ACE for SHA1/SHA256 algorithms.
  423. nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  424. TCP htcp registered
  425. Initializing XFRM netlink socket
  426. NET: Registered protocol family 15
  427. RPC: Registered udp transport module.
  428. RPC: Registered tcp transport module.
  429. Using IPI Shortcut mode
  430. md: Autodetecting RAID arrays.
  431. hub 1-0:1.0: unable to enumerate USB device on port 3
  432. md: Scanned 10 and added 10 devices.
  433. md: autorun ...
  434. md: considering sdd1 ...
  435. md:  adding sdd1 ...
  436. md: sdc5 has different UUID to sdd1
  437. md: sdc3 has different UUID to sdd1
  438. md:  adding sdc1 ...
  439. md: sdb5 has different UUID to sdd1
  440. md: sdb3 has different UUID to sdd1
  441. md:  adding sdb1 ...
  442. md: sda5 has different UUID to sdd1
  443. md: sda3 has different UUID to sdd1
  444. md:  adding sda1 ...
  445. md: created md0
  446. md: bind<sda1>
  447. md: bind<sdb1>
  448. md: bind<sdc1>
  449. md: bind<sdd1>
  450. md: running: <sdd1><sdc1><sdb1><sda1>
  451. raid1: raid set md0 active with 4 out of 4 mirrors
  452. md: considering sdc5 ...
  453. md:  adding sdc5 ...
  454. md: sdc3 has different UUID to sdc5
  455. md:  adding sdb5 ...
  456. md: sdb3 has different UUID to sdc5
  457. md:  adding sda5 ...
  458. md: sda3 has different UUID to sdc5
  459. md: created md3
  460. md: bind<sda5>
  461. md: bind<sdb5>
  462. md: bind<sdc5>
  463. md: running: <sdc5><sdb5><sda5>
  464. raid5: device sdc5 operational as raid disk 2
  465. raid5: device sdb5 operational as raid disk 1
  466. raid5: device sda5 operational as raid disk 0
  467. raid5: allocated 3163kB for md3
  468. raid5: raid level 5 set md3 active with 3 out of 3 devices, algorithm 2
  469. RAID5 conf printout:
  470.  --- rd:3 wd:3
  471.  disk 0, o:1, dev:sda5
  472.  disk 1, o:1, dev:sdb5
  473.  disk 2, o:1, dev:sdc5
  474. md: considering sdc3 ...
  475. md:  adding sdc3 ...
  476. md: sdb3 has different UUID to sdc3
  477. md: sda3 has different UUID to sdc3
  478. md: created md2
  479. md: bind<sdc3>
  480. md: running: <sdc3>
  481. raid1: raid set md2 active with 1 out of 2 mirrors
  482. md: considering sdb3 ...
  483. md:  adding sdb3 ...
  484. md:  adding sda3 ...
  485. md: created md1
  486. md: bind<sda3>
  487. md: bind<sdb3>
  488. md: running: <sdb3><sda3>
  489. raid1: raid set md1 active with 2 out of 2 mirrors
  490. md: ... autorun DONE.
  491. XFS mounting filesystem sdd3
  492. Ending clean XFS mount for filesystem: sdd3
  493. VFS: Mounted root (xfs filesystem) readonly.
  494. Freeing unused kernel memory: 216k freed
  495. usb 2-1: new full speed USB device using uhci_hcd and address 2
  496. usb 2-1: configuration #1 chosen from 1 choice
  497. usb 3-1: new low speed USB device using uhci_hcd and address 2
  498. usb 3-1: configuration #1 chosen from 1 choice
  499. Velocity is AUTO mode
  500. eth1: link up, 10Mbps, full-duplex, lpa 0x4061
  501. eth0: Link auto-negotiation speed 1000M bps full duplex
  502. Driver 'sr' needs updating - please use bus_type methods
  503. sr0: scsi3-mmc drive: 62x/62x writer cd/rw xa/form2 cdda tray
  504. Uniform CD-ROM driver Revision: 3.20
  505. sr 4:0:1:0: Attached scsi CD-ROM sr0
  506. Linux video capture interface: v2.00
  507. cx23885 driver version 0.0.1 loaded
  508. cx23885 0000:02:00.0: enabling device (0000 -> 0002)
  509. ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 24 (level, low) -> IRQ 24
  510. CORE cx23885[0]: subsystem: 0070:8101, board: Hauppauge WinTV-HVR1700 [card=8,autodetected]
  511. usbcore: registered new interface driver hiddev
  512. input: Logitech USB-PS/2 Optical Mouse as /class/input/input4
  513. input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.1-1
  514. usbcore: registered new interface driver usbhid
  515. usbhid: v2.6:USB HID core driver
  516. cx23885[0]: i2c bus 0 registered
  517. cx23885[0]: i2c bus 1 registered
  518. cx23885[0]: i2c bus 2 registered
  519. tveeprom 0-0050: Huh, no eeprom present (err=-5)?
  520. tveeprom 0-0050: Encountered bad packet header [00]. Corrupt or not a Hauppauge eeprom.
  521. cx23885[0]: warning: unknown hauppauge model #0
  522. cx23885[0]: hauppauge eeprom: model=0
  523. cx23885[0]: cx23885 based dvb card
  524. tda10048_readreg: readreg error (ret == -5)
  525. cx23885[0]: frontend initialization failed
  526. cx23885_dvb_register() dvb_register failed err = -1
  527. cx23885_dev_setup() Failed to register dvb on VID_C
  528. cx23885_dev_checkrevision() New hardware revision found 0x0
  529. cx23885_dev_checkrevision() Hardware revision unknown 0x0
  530. cx23885[0]/0: found at 0000:02:00.0, rev: 2, irq: 24, latency: 0, mmio: 0xfe800000
  531. PCI: Setting latency timer of device 0000:02:00.0 to 64
  532. ACPI: PCI Interrupt 0000:00:14.0[A] -> GSI 17 (level, low) -> IRQ 17
  533. ath5k_pci 0000:00:14.0: registered as 'phy0'
  534. phy0: Selected rate control algorithm 'pid'
  535. usb_id[2169]: segfault at 0 ip b7e20348 sp bff7f960 error 4 in libc-2.7.so[b7dae000+149000]
  536. ath5k phy0: Atheros AR5213A chip found (MAC: 0x59, PHY: 0x43)
  537. ath5k phy0: RF2112A 2GHz radio found (0x46)
  538. usbcore: registered new interface driver usblp
  539. VIA RNG detected
  540. EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
  541. Adding 996020k swap on /dev/mapper/swapsda.  Priority:1 extents:1 across:996020k
  542. Adding 996020k swap on /dev/mapper/swapsdb.  Priority:1 extents:1 across:996020k
  543. Adding 996020k swap on /dev/mapper/swapsdc.  Priority:1 extents:1 across:996020k
  544. PPP generic driver version 2.4.2
  545. NET: Registered protocol family 17
  546. ip_tables: (C) 2000-2006 Netfilter Core Team
  547. NET: Registered protocol family 24
  548. Marking TSC unstable due to: cpufreq changes.
  549. Clocksource tsc unstable (delta = -102248313 ns)
  550. cdrom: This disc doesn't have any tracks I recognize!
  551. warning: `named' uses 32-bit capabilities (legacy support in use)
  552. ACPI: PCI interrupt for device 0000:02:00.0 disabled
  553. cx23885 driver version 0.0.1 loaded
  554. ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 24 (level, low) -> IRQ 24
  555. cx23885[0]/0: cx23885_dev_setup() Memory configured for PCIe bridge type 885
  556. cx23885[0]/0: cx23885_init_tsport(portno=2)
  557. CORE cx23885[0]: subsystem: 0070:8101, board: Hauppauge WinTV-HVR1700 [card=8,autodetected]
  558. cx23885[0]/0: cx23885_pci_quirks()
  559. cx23885[0]/0: cx23885_dev_setup() tuner_type = 0x0 tuner_addr = 0x0
  560. cx23885[0]/0: cx23885_dev_setup() radio_type = 0x0 radio_addr = 0x0
  561. cx23885[0]/0: cx23885_reset()
  562. cx23885[0]/0: cx23885_sram_channel_setup() Configuring channel [VID A]
  563. cx23885[0]/0: cx23885_sram_channel_setup() 0x000107b0 <- 0x00000040
  564. cx23885[0]/0: cx23885_sram_channel_setup() 0x000107c0 <- 0x00000b80
  565. cx23885[0]/0: cx23885_sram_channel_setup() 0x000107d0 <- 0x000016c0
  566. cx23885[0]/0: [bridge 885] sram setup VID A: bpl=2880 lines=3
  567. cx23885[0]/0: cx23885_sram_channel_setup() Erasing channel [ch2]
  568. cx23885[0]/0: cx23885_sram_channel_setup() Configuring channel [TS1 B]
  569. cx23885[0]/0: cx23885_sram_channel_setup() 0x00010400 <- 0x00005000
  570. cx23885[0]/0: cx23885_sram_channel_setup() 0x00010410 <- 0x000052f0
  571. cx23885[0]/0: cx23885_sram_channel_setup() 0x00010420 <- 0x000055e0
  572. cx23885[0]/0: cx23885_sram_channel_setup() 0x00010430 <- 0x000058d0
  573. cx23885[0]/0: cx23885_sram_channel_setup() 0x00010440 <- 0x00005bc0
  574. cx23885[0]/0: [bridge 885] sram setup TS1 B: bpl=752 lines=5
  575. cx23885[0]/0: cx23885_sram_channel_setup() Erasing channel [ch4]
  576. cx23885[0]/0: cx23885_sram_channel_setup() Erasing channel [ch5]
  577. cx23885[0]/0: cx23885_sram_channel_setup() Configuring channel [TS2 C]
  578. cx23885[0]/0: cx23885_sram_channel_setup() 0x000108d0 <- 0x00006000
  579. cx23885[0]/0: cx23885_sram_channel_setup() 0x000108e0 <- 0x000062f0
  580. cx23885[0]/0: cx23885_sram_channel_setup() 0x000108f0 <- 0x000065e0
  581. cx23885[0]/0: cx23885_sram_channel_setup() 0x00010900 <- 0x000068d0
  582. cx23885[0]/0: cx23885_sram_channel_setup() 0x00010910 <- 0x00006bc0
  583. cx23885[0]/0: [bridge 885] sram setup TS2 C: bpl=752 lines=5
  584. cx23885[0]/0: cx23885_sram_channel_setup() Erasing channel [ch7]
  585. cx23885[0]/0: cx23885_sram_channel_setup() Erasing channel [ch8]
  586. cx23885[0]/0: cx23885_sram_channel_setup() Erasing channel [ch9]
  587. cx23885[0]: i2c bus 0 registered
  588. cx23885[0]: i2c bus 1 registered
  589. cx23885[0]: i2c bus 2 registered
  590. tveeprom 0-0050: Huh, no eeprom present (err=-5)?
  591. tveeprom 0-0050: Encountered bad packet header [00]. Corrupt or not a Hauppauge eeprom.
  592. cx23885[0]: warning: unknown hauppauge model #0
  593. cx23885[0]: hauppauge eeprom: model=0
  594. cx23885[0]: cx23885 based dvb card
  595. tda10048_readreg: readreg error (ret == -5)
  596. cx23885[0]: frontend initialization failed
  597. cx23885_dvb_register() dvb_register failed err = -1
  598. cx23885_dev_setup() Failed to register dvb on VID_C
  599. cx23885_dev_checkrevision() New hardware revision found 0x0
  600. cx23885_dev_checkrevision() Hardware revision unknown 0x0
  601. cx23885[0]/0: found at 0000:02:00.0, rev: 2, irq: 24, latency: 0, mmio: 0xfe800000
  602. PCI: Setting latency timer of device 0000:02:00.0 to 64
  603. ACPI: PCI interrupt for device 0000:02:00.0 disabled
  604. I2O subsystem v1.325
  605. i2o: max drivers = 8
  606. cx23885 driver version 0.0.1 loaded
  607. ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 24 (level, low) -> IRQ 24
  608. cx23885[0]/0: cx23885_dev_setup() Memory configured for PCIe bridge type 885
  609. cx23885[0]/0: cx23885_init_tsport(portno=2)
  610. CORE cx23885[0]: subsystem: 0070:8101, board: Hauppauge WinTV-HVR1700 [card=8,autodetected]
  611. cx23885[0]/0: cx23885_pci_quirks()
  612. cx23885[0]/0: cx23885_dev_setup() tuner_type = 0x0 tuner_addr = 0x0
  613. cx23885[0]/0: cx23885_dev_setup() radio_type = 0x0 radio_addr = 0x0
  614. cx23885[0]/0: cx23885_reset()
  615. cx23885[0]/0: cx23885_sram_channel_setup() Configuring channel [VID A]
  616. cx23885[0]/0: cx23885_sram_channel_setup() 0x000107b0 <- 0x00000040
  617. cx23885[0]/0: cx23885_sram_channel_setup() 0x000107c0 <- 0x00000b80
  618. cx23885[0]/0: cx23885_sram_channel_setup() 0x000107d0 <- 0x000016c0
  619. cx23885[0]/0: [bridge 885] sram setup VID A: bpl=2880 lines=3
  620. cx23885[0]/0: cx23885_sram_channel_setup() Erasing channel [ch2]
  621. cx23885[0]/0: cx23885_sram_channel_setup() Configuring channel [TS1 B]
  622. cx23885[0]/0: cx23885_sram_channel_setup() 0x00010400 <- 0x00005000
  623. cx23885[0]/0: cx23885_sram_channel_setup() 0x00010410 <- 0x000052f0
  624. cx23885[0]/0: cx23885_sram_channel_setup() 0x00010420 <- 0x000055e0
  625. cx23885[0]/0: cx23885_sram_channel_setup() 0x00010430 <- 0x000058d0
  626. cx23885[0]/0: cx23885_sram_channel_setup() 0x00010440 <- 0x00005bc0
  627. cx23885[0]/0: [bridge 885] sram setup TS1 B: bpl=752 lines=5
  628. cx23885[0]/0: cx23885_sram_channel_setup() Erasing channel [ch4]
  629. cx23885[0]/0: cx23885_sram_channel_setup() Erasing channel [ch5]
  630. cx23885[0]/0: cx23885_sram_channel_setup() Configuring channel [TS2 C]
  631. cx23885[0]/0: cx23885_sram_channel_setup() 0x000108d0 <- 0x00006000
  632. cx23885[0]/0: cx23885_sram_channel_setup() 0x000108e0 <- 0x000062f0
  633. cx23885[0]/0: cx23885_sram_channel_setup() 0x000108f0 <- 0x000065e0
  634. cx23885[0]/0: cx23885_sram_channel_setup() 0x00010900 <- 0x000068d0
  635. cx23885[0]/0: cx23885_sram_channel_setup() 0x00010910 <- 0x00006bc0
  636. cx23885[0]/0: [bridge 885] sram setup TS2 C: bpl=752 lines=5
  637. cx23885[0]/0: cx23885_sram_channel_setup() Erasing channel [ch7]
  638. cx23885[0]/0: cx23885_sram_channel_setup() Erasing channel [ch8]
  639. cx23885[0]/0: cx23885_sram_channel_setup() Erasing channel [ch9]
  640. cx23885[0]: i2c bus 0 registered
  641. cx23885[0]: i2c bus 1 registered
  642. cx23885[0]: i2c bus 2 registered
  643. tveeprom 0-0050: Huh, no eeprom present (err=-5)?
  644. tveeprom 0-0050: Encountered bad packet header [00]. Corrupt or not a Hauppauge eeprom.
  645. cx23885[0]: warning: unknown hauppauge model #0
  646. cx23885[0]: hauppauge eeprom: model=0
  647. cx23885[0]: cx23885 based dvb card
  648. tda10048_readreg: readreg error (ret == -5)
  649. cx23885[0]: frontend initialization failed
  650. cx23885_dvb_register() dvb_register failed err = -1
  651. cx23885_dev_setup() Failed to register dvb on VID_C
  652. cx23885_dev_checkrevision() New hardware revision found 0x0
  653. cx23885_dev_checkrevision() Hardware revision unknown 0x0
  654. cx23885[0]/0: found at 0000:02:00.0, rev: 2, irq: 24, latency: 0, mmio: 0xfe800000
  655. PCI: Setting latency timer of device 0000:02:00.0 to 64