Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- ry domain changed to country: US
- [ 91.097045] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 91.097106] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
- [ 91.097137] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
- [ 91.097167] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
- [ 91.097229] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
- [ 91.097259] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
- [ 91.097290] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
- [ 91.098602] NET: Registered protocol family 2
- [ 91.104339] Switched to high resolution mode on CPU 0
- [ 91.166961] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
- [ 91.167327] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
- [ 91.167633] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
- [ 91.167846] TCP: Hash tables configured (established 8192 bind 8192)
- [ 91.167877] TCP reno registered
- [ 91.190429] NET: Registered protocol family 1
- [ 91.211334] VFS: Disk quotas dquot_6.5.1
- [ 91.211486] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 91.212982] msgmni has been set to 479
- [ 91.213562] lowmem: Module initialized.
- [ 91.222045] alg: No test for stdrng (krng)
- [ 91.222198] io scheduler noop registered
- [ 91.222625] io scheduler cfq registered (default)
- [ 91.223022] OMAP DSS rev 2.0
- [ 91.223144] OMAP DISPC rev 3.0
- [ 91.223205] OMAP VENC rev 2
- [ 91.231048] OMAP3 ROM RNG: initializing
- [ 91.233245] Serial: 8250/16550 driver4 ports, IRQ sharing disabled
- [ 91.239868] brd: module loaded
- [ 91.242187] loop: module loaded
- [ 91.242279] i2c /dev entries driver
- [ 91.243438] input: triton2-pwrbutton as /class/input/input0
- [ 91.268432] triton2 power button driver initialized
- [ 91.269012] OneNAND driver initializing
- [ 91.270233] omap2-onenand omap2-onenand: initializing on CS0, phys base 0x04000000, virtual base d0880000
- [ 91.270355] OneNAND Manufacturer: Samsung (0xec)
- [ 91.270355] Muxed OneNAND 256MB 1.8V 16-bit (0x40)
- [ 91.270385] OneNAND version = 0x0121
- [ 91.270416] Chip support all block unlock
- [ 91.270446] Chip has 2 plane
- [ 91.272064] Scanning device for bad blocks
- [ 91.387268] Creating 6 MTD partitions on "omap2-onenand":
- [ 91.387329] 0x00000000-0x00020000 : "bootloader"
- [ 91.387725] 0x00020000-0x00080000 : "config"
- [ 91.387969] 0x00080000-0x000c0000 : "log"
- [ 91.390411] mtdoops: Attached to MTD device 2
- [ 91.390441] 0x000c0000-0x002c0000 : "kernel"
- [ 91.390716] 0x002c0000-0x004c0000 : "initfs"
- [ 91.390991] 0x004c0000-0x10000000 : "rootfs"
- [ 91.393157] UBI: attaching mtd5 to ubi0
- [ 91.393218] UBI: physical eraseblock size: 131072 bytes (128 KiB)
- [ 91.393249] UBI: logical eraseblock size: 129024 bytes
- [ 91.393280] UBI: smallest flash I/O unit: 2048
- [ 91.393310] UBI: sub-page size: 512
- [ 91.393341] UBI: VID header offset: 512 (aligned 512)
- [ 91.393432] UBI: data offset: 2048
- [ 91.528228] UBI: attached mtd5 to ubi0
- [ 91.528289] UBI: MTD device name: "rootfs"
- [ 91.528320] UBI: MTD device size: 251 MiB
- [ 91.528350] UBI: number of good PEBs: 2010
- [ 91.528381] UBI: number of bad PEBs: 0
- [ 91.528411] UBI: max. allowed volumes: 128
- [ 91.528442] UBI: wear-leveling threshold: 4096
- [ 91.528472] UBI: number of internal volumes: 1
- [ 91.528503] UBI: number of user volumes: 1
- [ 91.528533] UBI: available PEBs: 0
- [ 91.528564] UBI: total number of reserved PEBs: 2010
- [ 91.528594] UBI: number of PEBs reserved for bad PEB handling: 20
- [ 91.528625] UBI: max/mean erase counter: 20/4
- [ 91.528656] UBI: image sequence number: 1
- [ 91.529174] usbcore: registered new interface driver libusual
- [ 91.529296] mtdoops: Ready 0, 1
- [ 91.529327] UBI: background thread "ubi_bgt0d" started, PID 25
- [ 91.550231] input: omap_twl4030keypad as /class/input/input1
- [ 91.598785] cpuidle: using governor ladder
- [ 91.598846] cpuidle: using governor menu
- [ 91.599029] Advanced Linux Sound Architecture Driver Version 1.0.18rc3.
- [ 91.599273] ASoC version 0.13.2
- [ 91.612884] AIC3X Audio Codec 0.2
- [ 91.615447] asoc: tlv320aic3x <-> omap-mcbsp-dai-0 mapping ok
- [ 91.616973] asoc: Bluetooth codec <-> omap-mcbsp-dai-1 mapping ok
- [ 91.668670] input: RX51 (tlv320aic3x) Jack as /class/input/input2
- [ 91.692871] ALSA device list:
- [ 91.692932] #0: RX51 (tlv320aic3x)
- [ 91.693420] TCP cubic registered
- [ 91.693481] NET: Registered protocol family 17
- [ 91.693542] NET: Registered protocol family 15
- [ 91.693603] Power Management for TI OMAP3.
- [ 91.696990] pm_dbg_init()
- [ 91.697692] SmartReflex driver initialized
- [ 91.704376] Disabling unused clock "gpt2_ick"
- [ 91.704467] Disabling unused clock "gpt3_ick"
- [ 91.704498] Disabling unused clock "gpt4_ick"
- [ 91.704528] Disabling unused clock "gpt5_ick"
- [ 91.704559] Disabling unused clock "gpt6_ick"
- [ 91.704589] Disabling unused clock "gpt7_ick"
- [ 91.704620] Disabling unused clock "gpt8_ick"
- [ 91.704681] Disabling unused clock "gpt9_ick"
- [ 91.704711] Disabling unused clock "uart3_ick"
- [ 91.704742] Disabling unused clock "gpio2_dbck"
- [ 91.704772] Disabling unused clock "gpio3_dbck"
- [ 91.704803] Disabling unused clock "gpio4_dbck"
- [ 91.704864] Disabling unused clock "gpio5_dbck"
- [ 91.704895] Disabling unused clock "gpio6_dbck"
- [ 91.704925] Disabling unused clock "gpt9_fck"
- [ 91.704956] Disabling unused clock "gpt8_fck"
- [ 91.704986] Disabling unused clock "gpt7_fck"
- [ 91.705017] Disabling unused clock "gpt6_fck"
- [ 91.705078] Disabling unused clock "gpt5_fck"
- [ 91.705108] Disabling unused clock "gpt4_fck"
- [ 91.705139] Disabling unused clock "gpt3_fck"
- [ 91.705169] Disabling unused clock "gpt2_fck"
- [ 91.705200] Disabling unused clock "uart3_fck"
- [ 91.705230] Disabling unused clock "wdt2_ick"
- [ 91.705291] Disabling unused clock "wdt2_fck"
- [ 91.705322] Disabling unused clock "gpio1_dbck"
- [ 91.705352] Disabling unused clock "rng_ick"
- [ 91.705413] Disabling unused clock "ssi_ick"
- [ 91.705444] Disabling unused clock "gpt10_ick"
- [ 91.705474] Disabling unused clock "gpt11_ick"
- [ 91.705505] Disabling unused clock "uart1_ick"
- [ 91.705535] Disabling unused clock "uart2_ick"
- [ 91.705596] Disabling unused clock "usbtll_ick"
- [ 91.705627] Disabling unused clock "ssi_ssr_fck"
- [ 91.705688] Disabling unused clock "uart1_fck"
- [ 91.705718] Disabling unused clock "uart2_fck"
- [ 91.705749] Disabling unused clock "usbtll_fck"
- [ 91.705810] Disabling unused clock "ts_fck"
- [ 91.705932] Disabling unused clock "cpefuse_fck"
- [ 91.705963] Disabling unused clock "gpt11_fck"
- [ 91.706024] Disabling unused clock "gpt10_fck"
- [ 91.706054] Disabling unused clock "dpll5_ck"
- [ 91.706115] Disabling unused clock "dpll4_m6x2_ck"
- [ 91.706176] Disabling unused clock "dpll4_m5x2_ck"
- [ 91.706207] Disabling unused clock "dpll3_m3x2_ck"
- [ 91.706604] Bootup reason: sw_rst
- [ 91.706695] OMAP GPIO switch handler initializing
- [ 91.709197] slide (GPIO 71) is now open
- [ 91.709228] proximity (GPIO 89) is now open
- [ 91.709289] kb_lock (GPIO 113) is now open
- [ 91.709289] headphone (GPIO 177) is now disconnected
- [ 91.709350] cam_shutter (GPIO 110) is now closed
- [ 91.709381] cam_launch (GPIO 69) is now inactive
- [ 91.709411] cam_focus (GPIO 68) is now inactive
- [ 91.709442] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
- [ 91.721801] omapfb: acx565akm rev 8b LCD detected
- [ 91.730255] tpa6130a2 2-0060: Headphone amplifier initialized successfully
- [ 91.776641] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
- [ 91.776733] UBIFS: file system size: 254822400 bytes (248850 KiB, 243 MiB, 1975 LEBs)
- [ 91.776794] UBIFS: journal size: 9033728 bytes (8822 KiB, 8 MiB, 71 LEBs)
- [ 91.776824] UBIFS: media format: 4 (latest is 4)
- [ 91.776855] UBIFS: default compressor: lzo
- [ 91.776885] UBIFS: reserved for root: 4384586 bytes (4281 KiB)
- [ 91.777435] VFS: Mounted root (ubifs filesystem).
- [ 91.777648] Freeing init memory: 144K
- [ 93.258789] Registered led device: twl4030:vibrator
- [ 93.367095] twl4030_rtc twl4030_rtc: rtc core: registered twl4030_rtc as rtc0
- [ 93.490417] tsl2563 2-0029: model 7, rev. 0
- [ 93.553009] lp5523 2-0032: LP5523 Programmable led chip found
- [ 93.682586] Linux video capture interface: v2.00
- [ 93.724914] I2C driver for Si4713 FM Radio Transmitter
- [ 94.487304] Bluetooth: Core ver 2.15
- [ 94.501678] NET: Registered protocol family 31
- [ 94.501739] Bluetooth: HCI device and connection manager initialized
- [ 94.501770] Bluetooth: HCI socket layer initialized
- [ 94.542449] hci_h4p hci_h4p: Registering HCI H4P device
- [ 94.549804] i2c_omap i2c_omap.2: controller timed out
- [ 94.606750] lp5523 2-0032: got interrupt from led chip
- [ 94.607330] lp5523 2-0032: interrupt from led chip 4f
- [ 94.607360] lp5523 2-0032: all engines configured
- [ 94.607391] lp5523 2-0032: disabling engines
- [ 94.608001] Registered led device: lp5523:kb1
- [ 94.608154] Registered led device: lp5523:kb2
- [ 94.608306] Registered led device: lp5523:kb3
- [ 94.608459] Registered led device: lp5523:kb4
- [ 94.608581] Registered led device: lp5523:b
- [ 94.608734] Registered led device: lp5523:g
- [ 94.608856] Registered led device: lp5523:r
- [ 94.608978] Registered led device: lp5523:kb5
- [ 94.609130] Registered led device: lp5523:kb6
- [ 94.672180] nokia-av nokia-av: accessory detect module initialized
- [ 94.691650] radio-si4713 2-0063: Detected Si4713 (0x0d) Firmware: 3.0 Patch ID: 00:00 Component: 3.0 Chip Rev.: unknown
- [ 94.736816] mmci-omap-hs mmci-omap-hs.0: Failed to get debounce clock
- [ 94.782196] TSC2005 driver initializing
- [ 94.811065] input: TSC2005 touchscreen as /class/input/input3
- [ 94.862731] mmci-omap-hs mmci-omap-hs.1: Failed to get debounce clock
- [ 95.068481] omap_wdt omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec, nowayout is on
- [ 95.095794] SSI DRIVER Version 1.1-rc2
- [ 95.096282] omap_ssi omap_ssi: SSI Hardware REVISION 1.0
- [ 95.167816] smc91x: not found (-19).
- [ 95.171600] phy0: Selected rate control algorithm 'minstrel'
- [ 95.198516] wl1251: loaded
- [ 95.199249] wl1251: initialized
- [ 95.248138] mmc0: host does not support reading read-only switch. assuming write-enable.
- [ 95.248260] mmc0: new high speed SDHC card at address 697b
- [ 95.254730] mmcblk0: mmc0:697b SD16G 14.9 GiB
- [ 95.255035] mmcblk0: p1 p2 p3
- [ 95.417022] mmc1: new high speed MMC card at address 0001
- [ 95.427978] mmcblk1: mmc1:0001 MMC32G 29.8 GiB
- [ 95.428314] mmcblk1: p1 p2 p3
- [ 95.586944] CMT speech driver v0.2.0
- [ 95.592071] NET: Registered protocol family 35
- [ 95.625823] SSI McSAAB PROTOCOL Version: 2.0-rc1
- [ 95.963073] dspbridge_init: 412800 bytes @ 80600000
- [ 96.050537] omap-iommu omap-iommu.1: isp registered
- [ 96.210845] omap-iommu omap-iommu.1: isp: version 1.1
- [ 96.357238] smia-sensor 2-0010: firmware: requesting smia-sensor-01-022b-04.bin
- [ 96.382629] smia_reglist_import: meta_reglist version 2009-07-27
- [ 96.382720] smia_reglist_import: type 10 w 648 h 488 fmt 30314142 ival 100/1502 ptr d0c392a0
- [ 96.382751] smia_reglist_import: type 10 w 648 h 488 fmt 30314142 ival 100/3003 ptr d0c39228
- [ 96.382751] smia_reglist_import: type 1 w 0 h 0 fmt 30314142 ival 100/0 ptr d0c39090
- [ 96.382781] smia_reglist_import: type 0 w 0 h 0 fmt 30314142 ival 100/0 ptr d0c39038
- [ 96.394866] et8ek8 3-003e: firmware: requesting et8ek8-0002.bin
- [ 96.418884] smia_reglist_import: meta_reglist version V14 03-June-2008
- [ 96.418975] smia_reglist_import: type 10 w 2592 h 1968 fmt 30314442 ival 100/1292 ptr d0c3c1f4
- [ 96.419006] smia_reglist_import: type 10 w 2592 h 1968 fmt 30314142 ival 100/399 ptr d0c3c454
- [ 96.419006] smia_reglist_import: type 10 w 1296 h 984 fmt 30314142 ival 100/501 ptr d0c3c57c
- [ 96.419036] smia_reglist_import: type 10 w 1296 h 984 fmt 30314442 ival 100/2500 ptr d0c3c614
- [ 96.419067] smia_reglist_import: type 10 w 1296 h 984 fmt 30314442 ival 100/3000 ptr d0c3c28c
- [ 96.419067] smia_reglist_import: type 10 w 864 h 656 fmt 30314142 ival 100/2988 ptr d0c3c324
- [ 96.419097] smia_reglist_import: type 10 w 648 h 492 fmt 30314142 ival 100/499 ptr d0c3c4e4
- [ 96.419128] smia_reglist_import: type 10 w 648 h 492 fmt 30314142 ival 100/2993 ptr d0c3c3bc
- [ 96.419128] smia_reglist_import: type 1 w 2592 h 1968 fmt 30314142 ival 100/1207 ptr d0c3c04c
- [ 97.172637] g_file_storage gadget: File-backed Storage Gadget, version: 7 August 2007
- [ 97.172698] g_file_storage gadget: Number of LUNs=2 Number of buffers=16
- [ 97.172760] musb_hdrc musb_hdrc: MUSB HDRC host driver
- [ 97.173309] musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1
- [ 97.173767] usb usb1: configuration #1 chosen from 1 choice
- [ 97.173980] hub 1-0:1.0: USB hub found
- [ 97.174102] hub 1-0:1.0: 1 port detected
- [ 102.509277] McSAAB: ACWAKE DOWN
- [ 102.509307] McSAAB: ACWAKE UP
- [ 102.509368] McSAAB: WAKELINES TEST OK
- [ 105.872894] kjournald starting. Commit interval 1 seconds
- [ 105.877685] EXT3 FS on mmcblk1p2, internal journal
- [ 105.877807] EXT3-fs: mounted filesystem with writeback data mode.
- [ 106.349822] Adding 786424k swap on /dev/mmcblk0p3. Priority:-1 extents:1 across:786424k
- [ 106.742065] Bluetooth: L2CAP ver 2.13
- [ 106.742095] Bluetooth: L2CAP socket layer initialized
- [ 106.824615] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 106.824676] Bluetooth: BNEP filters: protocol multicast
- [ 106.965423] Bluetooth: SCO (Voice Link) ver 0.6
- [ 106.965454] Bluetooth: SCO socket layer initialized
- [ 106.968841] hci_h4p hci_h4p: firmware: requesting bcmfw.bin
- [ 107.644805] Bluetooth: RFCOMM socket layer initialized
- [ 107.644897] Bluetooth: RFCOMM TTY layer initialized
- [ 107.644927] Bluetooth: RFCOMM ver 1.11
- [ 111.476226] misc iphb: Module registered in 2.6.28-omap1, built Oct 28 2009 15:33:55
- [ 135.364685] warning: `dnsmasq' uses 32-bit capabilities (legacy support in use)
- [ 144.626098] cfg80211: Regulatory domain changed to country: EU
- [ 144.626129] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 144.626159] (2402000 KHz - 2482000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
- [ 144.626190] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
- [ 144.626190] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
- [ 144.626220] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
- [ 144.626220] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
- [ 144.626251] (5490000 KHz - 5710000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
- [ 144.667266] wl12xx spi4.0: firmware: requesting wl1251-fw.bin
- [ 145.799896] wl1251: 154 tx blocks at 0x3b788, 35 rx blocks at 0x3a780
- [ 145.815582] wl1251: firmware booted (Rev 6.0.4.156)
- [ 146.450805] SCSI subsystem initialized
- [ 146.824096] wl1251: down
- [ 147.061950] Driver 'sd' needs updating - please use bus_type methods
- [ 147.354583] wl1251: 154 tx blocks at 0x3b788, 35 rx blocks at 0x3a780
- [ 147.370178] wl1251: firmware booted (Rev 6.0.4.156)
- [ 148.159301] wlan0: authenticate with AP 00:13:49:e0:de:dc
- [ 148.161346] wlan0: authenticated
- [ 148.161376] wlan0: associate with AP 00:13:49:e0:de:dc
- [ 148.163696] wlan0: RX AssocResp from 00:13:49:e0:de:dc (capab=0x411 status=0 aid=2)
- [ 148.163726] wlan0: associated
- [ 156.721771] wlan0: beacon loss from AP cf1bb52c - sending probe request
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement