m1dn1ght

m1dn1ght@m1dn1ght-laptop:~$ dmesg
[    0.000000] Linux version 2.6.24-16-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008 (Ubuntu 2.6.24-16.30-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[    0.000000]  BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 0000000077d90000 (usable)
[    0.000000]  BIOS-e820: 0000000077d90000 - 0000000077d9b000 (ACPI data)
[    0.000000]  BIOS-e820: 0000000077d9b000 - 0000000077d9c000 (ACPI NVS)
[    0.000000]  BIOS-e820: 0000000077d9c000 - 0000000078000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000] 1021MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000] found SMP MP-table at 000f85b0
[    0.000000] Entering add_active_range(0, 0, 490896) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229376
[    0.000000]   HighMem    229376 ->   490896
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   490896
[    0.000000] On node 0 totalpages: 490896
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1760 pages used for memmap
[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2043 pages used for memmap
[    0.000000]   HighMem zone: 259477 pages, LIFO batch:31
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] DMI present.
[    0.000000] Intel MultiProcessor Specification v1.4
[    0.000000]     Virtual Wire compatibility mode.
[    0.000000] OEM ID: SiS      Product ID: 671MX        APIC at: 0xFEE00000
[    0.000000] Processor #0 6:15 APIC version 20
[    0.000000] Processor #1 6:15 APIC version 20
[    0.000000] I/O APIC #2 Version 20 at 0xFEC00000.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Processors: 2
[    0.000000] Allocating PCI resources starting at 80000000 (gap: 78000000:68000000)
[    0.000000] swsusp: Registered nosave memory region: 000000000009d000 - 000000000009e000
[    0.000000] swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e4000
[    0.000000] swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 487061
[    0.000000] Kernel command line: root=UUID=9db3a3c1-0609-43a1-b853-564995ce3920 ro quiet splash noapic acpi=off
[    0.000000] mapped APIC to ffffb000 (fee00000)
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Detected 1499.971 MHz processor.
[   21.891947] Console: colour VGA+ 80x25
[   21.891953] console [tty0] enabled
[   21.892376] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   21.892858] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   22.036448] Memory: 1934432k/1963584k available (2157k kernel code, 28016k reserved, 998k data, 364k init, 1046080k highmem)
[   22.036460] virtual kernel memory layout:
[   22.036461]     fixmap  : 0xfff4b000 - 0xfffff000   ( 720 kB)
[   22.036463]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   22.036465]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[   22.036467]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[   22.036469]       .init : 0xc041b000 - 0xc0476000   ( 364 kB)
[   22.036470]       .data : 0xc031b5a4 - 0xc0414dc4   ( 998 kB)
[   22.036472]       .text : 0xc0100000 - 0xc031b5a4   (2157 kB)
[   22.036478] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   22.036547] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[   22.116500] Calibrating delay using timer specific routine.. 3002.54 BogoMIPS (lpj=6005099)
[   22.116545] Security Framework initialized
[   22.116557] SELinux:  Disabled at boot.
[   22.116580] AppArmor: AppArmor initialized
[   22.116587] Failure registering capabilities with primary security module.
[   22.116602] Mount-cache hash table entries: 512
[   22.116827] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e39d 00000000 00000001 00000000
[   22.116842] monitor/mwait feature present.
[   22.116845] using mwait in idle threads.
[   22.116852] CPU: L1 I cache: 32K, L1 D cache: 32K
[   22.116855] CPU: L2 cache: 2048K
[   22.116860] CPU: Physical Processor ID: 0
[   22.116862] CPU: Processor Core ID: 0
[   22.116866] CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e39d 00000000 00000001 00000000
[   22.116881] Compat vDSO mapped to ffffe000.
[   22.116903] Checking 'hlt' instruction... OK.
[   22.133135] SMP alternatives: switching to UP code
[   22.135900] Early unpacking initramfs... done
[   22.729812] CPU0: Intel(R) Core(TM)2 Duo CPU     T5250  @ 1.50GHz stepping 0d
[   22.729837] SMP alternatives: switching to SMP code
[   22.730992] Booting processor 1/1 eip 3000
[   22.741496] Initializing CPU#1
[   22.819835] Calibrating delay using timer specific routine.. 3000.15 BogoMIPS (lpj=6000318)
[   22.819847] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e39d 00000000 00000001 00000000
[   22.819855] monitor/mwait feature present.
[   22.819860] CPU: L1 I cache: 32K, L1 D cache: 32K
[   22.819863] CPU: L2 cache: 2048K
[   22.819866] CPU: Physical Processor ID: 0
[   22.819868] CPU: Processor Core ID: 1
[   22.819871] CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e39d 00000000 00000001 00000000
[   22.820769] CPU1: Intel(R) Core(TM)2 Duo CPU     T5250  @ 1.50GHz stepping 0d
[   22.820800] Total of 2 processors activated (6002.70 BogoMIPS).
[   23.035813] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[   23.055819] Brought up 2 CPUs
[   23.055844] CPU0 attaching sched-domain:
[   23.055848]  domain 0: span 03
[   23.055852]   groups: 01 02
[   23.055857] CPU1 attaching sched-domain:
[   23.055859]  domain 0: span 03
[   23.055862]   groups: 02 01
[   23.056207] net_namespace: 64 bytes
[   23.056231] Booting paravirtualized kernel on bare hardware
[   23.056992] Time: 14:46:25  Date: 07/09/08
[   23.057035] NET: Registered protocol family 16
[   23.057336] EISA bus registered
[   23.072925] PCI: PCI BIOS revision 3.00 entry at 0xfde64, last bus=1
[   23.072930] PCI: Using configuration type 1
[   23.072933] Setting up standard PCI resources
[   23.080571] ACPI: Interpreter disabled.
[   23.080576] Linux Plug and Play Support v0.97 (c) Adam Belay
[   23.080629] pnp: PnP ACPI: disabled
[   23.080635] PnPBIOS: Scanning system for PnP BIOS support...
[   23.080662] PnPBIOS: Found PnP BIOS installation structure at 0xc00f85d0
[   23.080667] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xc42e, dseg 0x400
[   23.081455] PNPBIOS fault.. attempting recovery.
[   23.081506] PnPBIOS: Warning! Your PnP BIOS caused a fatal error. Attempting to continue
[   23.081555] PnPBIOS: You may need to reboot with the "pnpbios=off" option to operate stably
[   23.081605] PnPBIOS: Check with your vendor for an updated BIOS
[   23.081651] PnPBIOS: get_dev_node: unexpected status 0x37
[   23.081695] PnPBIOS: 0 nodes reported by PnP BIOS; 0 recorded by driver
[   23.082093] PCI: Probing PCI hardware
[   23.082149] PCI: Probing PCI hardware (bus 00)
[   23.127751] NET: Registered protocol family 8
[   23.127756] NET: Registered protocol family 20
[   23.127854] AppArmor: AppArmor Filesystem Enabled
[   23.128490] PCI: Bridge: 0000:00:01.0
[   23.128495]   IO window: 9000-9fff
[   23.128503]   MEM window: b0000000-b00fffff
[   23.128509]   PREFETCH window: c0000000-cfffffff
[   23.128528] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   23.128545] NET: Registered protocol family 2
[   23.131559] Time: tsc clocksource has been installed.
[   23.171791] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   23.172129] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[   23.172796] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   23.173109] TCP: Hash tables configured (established 131072 bind 65536)
[   23.173113] TCP reno registered
[   23.183909] checking if image is initramfs... it is
[   24.355879] Freeing initrd memory: 7700k freed
[   24.357072] audit: initializing netlink socket (disabled)
[   24.357094] audit(1215614786.200:1): initialized
[   24.357430] highmem bounce pool size: 64 pages
[   24.360400] VFS: Disk quotas dquot_6.5.1
[   24.360524] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   24.360823] io scheduler noop registered
[   24.360826] io scheduler anticipatory registered
[   24.360830] io scheduler deadline registered
[   24.360847] io scheduler cfq registered (default)
[   24.853960] Boot video device is 0000:01:00.0
[   24.854345] isapnp: Scanning for PnP cards...
[   24.993977] Clocksource tsc unstable (delta = 440071850 ns)
[   24.997795] Time: jiffies clocksource has been installed.
[   25.207707] isapnp: No Plug & Play device found
[   25.247179] Real Time Clock Driver v1.12ac
[   25.247289] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   25.248816] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   25.248920] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[   25.249102] PNP: No PS/2 controller found. Probing ports directly.
[   25.252027] i8042.c: Detected active multiplexing controller, rev 1.1.
[   25.253525] serio: i8042 KBD port at 0x60,0x64 irq 1
[   25.253533] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[   25.253537] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[   25.253541] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[   25.253545] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[   25.281625] mice: PS/2 mouse device common for all mice
[   25.281788] EISA: Probing bus 0 at eisa.0
[   25.281796] Cannot allocate resource for EISA slot 1
[   25.281832] EISA: Detected 0 cards.
[   25.281837] cpuidle: using governor ladder
[   25.281840] cpuidle: using governor menu
[   25.281979] NET: Registered protocol family 1
[   25.282022] Using IPI No-Shortcut mode
[   25.282071] registered taskstats version 1
[   25.282179]   Magic number: 0:402:788
[   25.282287] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   25.282290] EDD information not available.
[   25.282572] Freeing unused kernel memory: 364k freed
[   25.316338] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[   26.649448] fuse init (API version 7.9)
[   26.733484] thermal: Unknown symbol acpi_processor_set_thermal_limit
[   26.939533] usbcore: registered new interface driver usbfs
[   26.939571] usbcore: registered new interface driver hub
[   26.939619] usbcore: registered new device driver usb
[   26.960916] SCSI subsystem initialized
[   26.963240] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[   26.963311] ohci_hcd 0000:00:03.0: OHCI Host Controller
[   26.963648] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
[   26.963670] ohci_hcd 0000:00:03.0: irq 11, io mem 0xb0104000
[   27.012078] libata version 3.00 loaded.
[   27.016332] usb usb1: configuration #1 chosen from 1 choice
[   27.016374] hub 1-0:1.0: USB hub found
[   27.016386] hub 1-0:1.0: 4 ports detected
[   27.120132] ohci_hcd 0000:00:03.1: OHCI Host Controller
[   27.120175] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
[   27.120197] ohci_hcd 0000:00:03.1: irq 10, io mem 0xb0105000
[   27.178102] usb usb2: configuration #1 chosen from 1 choice
[   27.178143] hub 2-0:1.0: USB hub found
[   27.178154] hub 2-0:1.0: 4 ports detected
[   27.279996] ehci_hcd 0000:00:03.3: EHCI Host Controller
[   27.280045] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 3
[   27.280098] ehci_hcd 0000:00:03.3: irq 7, io mem 0xb0106000
[   27.291635] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   27.291789] usb usb3: configuration #1 chosen from 1 choice
[   27.291842] hub 3-0:1.0: USB hub found
[   27.291851] hub 3-0:1.0: 8 ports detected
[   27.399927] pata_sis 0000:00:02.5: version 0.5.2
[   27.401178] scsi0 : pata_sis
[   27.401254] scsi1 : pata_sis
[   27.401301] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1080 irq 14
[   27.401305] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1088 irq 15
[   27.679280] usb 3-6: new high speed USB device using ehci_hcd and address 2
[   27.719560] ata1.00: ATAPI: Optiarc DVD RW AD-7530B, NX06, max UDMA/33
[   27.891340] ata1.00: configured for UDMA/33
[   27.891404] ata2: port disabled. ignoring.
[   27.892692] scsi 0:0:0:0: CD-ROM            Optiarc  DVD RW AD-7530B  NX06 PQ: 0 ANSI: 5
[   27.895579] sata_sis 0000:00:05.0: version 1.0
[   27.895608] sata_sis 0000:00:05.0: Detected SiS 1183/966/966L/968/680 controller in PATA mode
[   27.895709] scsi2 : sata_sis
[   27.895778] scsi3 : sata_sis
[   27.895824] ata3: PATA max UDMA/133 cmd 0x10c8 ctl 0x10bc bmdma 0x10a0 irq 5
[   27.895829] ata4: PATA max UDMA/133 cmd 0x10c0 ctl 0x10b8 bmdma 0x10a8 irq 5
[   28.059514] ata3.00: ATA-7: Hitachi HTS541612J9SA00, SBDOC7KP, max UDMA/100
[   28.059522] ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   28.075515] ata3.00: configured for UDMA/100
[   28.242021] scsi 2:0:0:0: Direct-Access     ATA      Hitachi HTS54161 SBDO PQ: 0 ANSI: 5
[   28.254345] Driver 'sr' needs updating - please use bus_type methods
[   28.261895] Driver 'sd' needs updating - please use bus_type methods
[   28.266662] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[   28.266668] Uniform CD-ROM driver Revision: 3.20
[   28.266744] sr 0:0:0:0: Attached scsi CD-ROM sr0
[   28.266985] sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[   28.267005] sd 2:0:0:0: [sda] Write Protect is off
[   28.267010] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   28.267037] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   28.267105] sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[   28.267122] sd 2:0:0:0: [sda] Write Protect is off
[   28.267125] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   28.267152] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   28.267157]  sda:<5>sr 0:0:0:0: Attached scsi generic sg0 type 5
[   28.274483] sd 2:0:0:0: Attached scsi generic sg1 type 0
[   28.289470]  sda1 sda2 < sda5 >
[   28.313194] sd 2:0:0:0: [sda] Attached SCSI disk
[   28.366076] usb 3-6: configuration #1 chosen from 1 choice
[   28.390338] usbcore: registered new interface driver libusual
[   28.399791] Initializing USB Mass Storage driver...
[   28.399890] scsi4 : SCSI emulation for USB Mass Storage devices
[   28.399982] usbcore: registered new interface driver usb-storage
[   28.399987] USB Mass Storage support registered.
[   28.400115] usb-storage: device found at 2
[   28.400118] usb-storage: waiting for device to settle before scanning
[   28.610568] Attempting manual resume
[   28.610574] swsusp: Resume From Partition 8:5
[   28.610577] PM: Checking swsusp image.
[   28.610766] PM: Resume from disk failed.
[   28.658783] kjournald starting.  Commit interval 5 seconds
[   28.658797] EXT3-fs: mounted filesystem with ordered data mode.
[   33.394066] usb-storage: device scan complete
[   33.400434] scsi 4:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
[   33.401960] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[   33.402016] sd 4:0:0:0: Attached scsi generic sg2 type 0
[   38.361091] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   38.377279] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   38.441345] input: PC Speaker as /devices/platform/pcspkr/input/input2
[   38.701197] sis190 Gigabit Ethernet driver 1.2 loaded.
[   38.701238] PCI: Setting latency timer of device 0000:00:04.0 to 64
[   38.701256] 0000:00:04.0: Read MAC address from EEPROM
[   38.788947] 0000:00:04.0: Realtek PHY RTL8201 transceiver at address 1.
[   39.308448] 0000:00:04.0: Using transceiver at address 1 as default.
[   39.340789] 0000:00:04.0: SiS 191 PCI Gigabit Ethernet adapter at f88bc000 (IRQ: 3), 00:03:0d:7d:f4:1e
[   39.340796] eth0: GMII mode.
[   39.340803] eth0: Enabling Auto-negotiation.
[   39.568176] PCI: Setting latency timer of device 0000:00:0f.0 to 64
[   39.602074] hda_codec: Unknown model for ALC662, trying auto-probe from BIOS...
[   39.755335] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000
[   39.790962] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input3
[   41.633548] lp: driver loaded but no devices found
[   41.782663] Adding 4803392k swap on /dev/sda5.  Priority:-1 extents:1 across:4803392k
[   42.328576] EXT3 FS on sda1, internal journal
[   43.743723] ip_tables: (C) 2000-2006 Netfilter Core Team
[   44.552809] acpi_cpufreq: Unknown symbol acpi_processor_notify_smm
[   44.552890] acpi_cpufreq: Unknown symbol acpi_processor_unregister_performance
[   44.553181] acpi_cpufreq: Unknown symbol acpi_processor_preregister_performance
[   44.553308] acpi_cpufreq: Unknown symbol acpi_processor_register_performance
[   45.352836] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[   45.352844] apm: disabled - APM is not SMP safe.
[   45.553457] ppdev: user-space parallel port driver
[   45.670378] audit(1215614808.216:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=4364 profile="/usr/sbin/cupsd" namespace="default"
[   46.652217] Bluetooth: Core ver 2.11
[   46.652343] NET: Registered protocol family 31
[   46.652346] Bluetooth: HCI device and connection manager initialized
[   46.652352] Bluetooth: HCI socket layer initialized
[   46.674596] Bluetooth: L2CAP ver 2.9
[   46.674604] Bluetooth: L2CAP socket layer initialized
[   46.730559] Bluetooth: RFCOMM socket layer initialized
[   46.730582] Bluetooth: RFCOMM TTY layer initialized
[   46.730585] Bluetooth: RFCOMM ver 1.8
[   56.579939] eth0: mii ext = 0000.
[   56.595924] eth0: mii lpa = 41e1 adv = 01e1.
[   56.595930] eth0: link on 100 Mbps Full Duplex mode.
[   58.778950] NET: Registered protocol family 17
[   61.970344] NET: Registered protocol family 10
[   61.970728] lo: Disabled Privacy Extensions
[   72.452928] eth0: no IPv6 routers present
[  215.121963] CPU0 attaching NULL sched-domain.
[  215.121975] CPU1 attaching NULL sched-domain.
[  215.130218] CPU0 attaching sched-domain:
[  215.130225]  domain 0: span 03
[  215.130228]   groups: 01 02
[  215.130235] CPU1 attaching sched-domain:
[  215.130238]  domain 0: span 03
[  215.130241]   groups: 02 01
[  290.950348] usb 3-5: new high speed USB device using ehci_hcd and address 3
[  291.221408] usb 3-5: configuration #1 chosen from 1 choice
[  291.716951] phy0: Selected rate control algorithm 'simple'
[  291.856196] usbcore: registered new interface driver rt73usb
[  292.043173] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  321.160133] wlan0: Initial auth_alg=0
[  321.160144] wlan0: authenticate with AP 00:17:3f:59:05:cc
[  321.162527] wlan0: RX authentication from 00:17:3f:59:05:cc (alg=0 transaction=2 status=0)
[  321.162533] wlan0: authenticated
[  321.162538] wlan0: associate with AP 00:17:3f:59:05:cc
[  321.198480] wlan0: RX AssocResp from 00:17:3f:59:05:cc (capab=0x411 status=0 aid=2)
[  321.198486] wlan0: associated
[  321.198493] wlan0: switched to short barker preamble (BSSID=00:17:3f:59:05:cc)
[  321.203184] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  338.231016] usb 3-5: USB disconnect, address 3
[  338.231517] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3040 with error -19.
[  338.231529] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3040 with error -19.
[  338.231535] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19.
[  338.231541] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3028 with error -19.
[  338.231547] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3064 with error -19.
[  338.231553] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0c failed for offset 0x0000 with error -19.
[  338.461266] ndiswrapper version 1.52 loaded (smp=yes, preempt=no)
[  338.529388] usbcore: registered new interface driver ndiswrapper
[  354.078665] usb 3-5: new high speed USB device using ehci_hcd and address 11
[  355.073894] eth0: no IPv6 routers present
m1dn1ght@m1dn1ght-laptop:~$