Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Linux version 2.6.5-7.97-smp (geeko@buildhost) (gcc version 3.3.3 (SuSE Linux)) #1 SMP Fri Jul 2 14:21:59 UTC 2004
- BIOS-provided physical RAM map:
- BIOS-e820: 0000000000000000 - 000000000009a800 (usable)
- BIOS-e820: 000000000009a800 - 00000000000a0000 (reserved)
- BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
- BIOS-e820: 0000000000100000 - 000000005ff70000 (usable)
- BIOS-e820: 000000005ff70000 - 000000005ff76000 (ACPI data)
- BIOS-e820: 000000005ff76000 - 000000005ff80000 (ACPI NVS)
- BIOS-e820: 000000005ff80000 - 0000000060000000 (reserved)
- BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
- BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
- BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
- BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
- BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
- 128MB vmalloc/ioremap area available.
- 639MB HIGHMEM available.
- 896MB LOWMEM available.
- found SMP MP-table at 000f6b70
- On node 0 totalpages: 393072
- DMA zone: 4096 pages, LIFO batch:1
- Normal zone: 225280 pages, LIFO batch:16
- HighMem zone: 163696 pages, LIFO batch:16
- DMI present.
- IBM machine detected. Enabling interrupts during APM calls.
- IBM machine detected. Disabling SMBus accesses.
- Using APIC driver default
- ACPI: RSDP (v000 PTLTD ) @ 0x000f6b00
- ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x5ff71022
- ACPI: FADT (v001 INTEL LINDHRST 0x06040000 PTL 0x00000003) @ 0x5ff75d91
- ACPI: MCFG (v001 PTLTD MCFG 0x06040000 LTP 0x00000000) @ 0x5ff75e05
- ACPI: SPCR (v001 PTLTD $UCRTBL$ 0x06040000 PTL 0x00000001) @ 0x5ff75e45
- ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x5ff75e95
- ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x5ff75f31
- ACPI: ASF! (v032 MBI 0x06040000 0x00000000) @ 0x5ff75f59
- ACPI: DSDT (v001 Intel LINDHRST 0x06040000 MSFT 0x0100000e) @ 0x00000000
- ACPI: PM-Timer IO Port: 0x1008
- ACPI: Local APIC address 0xfee00000
- ES7000: did not find Unisys ACPI OEM table!
- ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
- Processor #0 15:3 APIC version 20
- ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
- Processor #6 15:3 APIC version 20
- ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
- Processor #1 15:3 APIC version 20
- ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
- Processor #7 15:3 APIC version 20
- ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
- ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
- ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
- ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
- ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
- IOAPIC[0]: Assigned apic_id 2
- IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
- ACPI: IOAPIC (id[0x03] address[0xfec81000] global_irq_base[0x18])
- IOAPIC[1]: Assigned apic_id 3
- IOAPIC[1]: apic_id 3, version 32, address 0xfec81000, GSI 24-47
- ACPI: IOAPIC (id[0x04] address[0xfec81400] global_irq_base[0x30])
- IOAPIC[2]: Assigned apic_id 4
- IOAPIC[2]: apic_id 4, version 32, address 0xfec81400, GSI 48-71
- ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
- ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- Enabling APIC mode: Flat. Using 3 I/O APICs
- Using ACPI (MADT) for SMP configuration information
- Built 1 zonelists
- Kernel command line: root=/dev/sda2 vga=0x314 selinux=0 resume=/dev/sda1 elevator=cfq splash=silent
- bootsplash: silent mode.
- Initializing CPU#0
- PID hash table entries: 4096 (order 12: 32768 bytes)
- CKRM Initialization
- ...... Initializing ClassType<taskclass> ........
- ...... Initializing ClassType<socket_class> ........
- CKRM Initialization done
- Detected 2801.446 MHz processor.
- Using tsc for high-res timesource
- Console: colour dummy device 80x25
- Memory: 1552464k/1572288k available (2224k kernel code, 18636k reserved, 760k data, 244k init, 654784k highmem)
- Checking if this processor honours the WP bit even in supervisor mode... Ok.
- Calibrating delay loop... 5521.40 BogoMIPS
- Security Scaffold v1.0.0 initialized
- SELinux: Disabled at boot.
- Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes)
- Inode-cache hash table entries: 131072 (order: 7, 524288 bytes)
- Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
- CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000
- CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000
- monitor/mwait feature present.
- using mwait in idle threads.
- CPU: Trace cache: 12K uops
- CPU: L2 cache: 1024K
- CPU: Physical Processor ID: 0
- CPU: After all inits, caps: bfebfbff 20000000 00000000 00000080
- Intel machine check architecture supported.
- Intel machine check reporting enabled on CPU#0.
- CPU#0: Intel P4/Xeon Extended MCE MSRs (24) available
- CPU#0: Thermal monitoring enabled
- Enabling fast FPU save and restore... done.
- Enabling unmasked SIMD FPU exception support... done.
- Checking 'hlt' instruction... OK.
- CPU0: Intel(R) Xeon(TM) CPU 2.80GHz stepping 04
- per-CPU timeslice cutoff: 2925.33 usecs.
- task migration cache decay timeout: 3 msecs.
- enabled ExtINT on CPU#0
- ESR value before enabling vector: 00000000
- ESR value after enabling vector: 00000000
- Booting processor 1/1 eip 3000
- Initializing CPU#1
- masked ExtINT on CPU#1
- ESR value before enabling vector: 00000000
- ESR value after enabling vector: 00000000
- Calibrating delay loop... 5586.94 BogoMIPS
- CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000
- CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000
- monitor/mwait feature present.
- CPU: Trace cache: 12K uops
- CPU: L2 cache: 1024K
- CPU: Physical Processor ID: 0
- CPU: After all inits, caps: bfebfbff 20000000 00000000 00000080
- Intel machine check architecture supported.
- Intel machine check reporting enabled on CPU#1.
- CPU#1: Intel P4/Xeon Extended MCE MSRs (24) available
- CPU#1: Thermal monitoring enabled
- CPU1: Intel(R) Xeon(TM) CPU 2.80GHz stepping 04
- Booting processor 2/6 eip 3000
- Initializing CPU#2
- masked ExtINT on CPU#2
- ESR value before enabling vector: 00000000
- ESR value after enabling vector: 00000000
- Calibrating delay loop... 5586.94 BogoMIPS
- CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000
- CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000
- monitor/mwait feature present.
- CPU: Trace cache: 12K uops
- CPU: L2 cache: 1024K
- CPU: Physical Processor ID: 3
- CPU: After all inits, caps: bfebfbff 20000000 00000000 00000080
- Intel machine check architecture supported.
- Intel machine check reporting enabled on CPU#2.
- CPU#2: Intel P4/Xeon Extended MCE MSRs (24) available
- CPU#2: Thermal monitoring enabled
- CPU2: Intel(R) Xeon(TM) CPU 2.80GHz stepping 04
- Booting processor 3/7 eip 3000
- Initializing CPU#3
- masked ExtINT on CPU#3
- ESR value before enabling vector: 00000000
- ESR value after enabling vector: 00000000
- Calibrating delay loop... 5586.94 BogoMIPS
- CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000
- CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000
- monitor/mwait feature present.
- CPU: Trace cache: 12K uops
- CPU: L2 cache: 1024K
- CPU: Physical Processor ID: 3
- CPU: After all inits, caps: bfebfbff 20000000 00000000 00000080
- Intel machine check architecture supported.
- Intel machine check reporting enabled on CPU#3.
- CPU#3: Intel P4/Xeon Extended MCE MSRs (24) available
- CPU#3: Thermal monitoring enabled
- CPU3: Intel(R) Xeon(TM) CPU 2.80GHz stepping 04
- Total of 4 processors activated (22282.24 BogoMIPS).
- ENABLING IO-APIC IRQs
- init IO_APIC IRQs
- IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23, 3-0, 3-1, 3-2, 3-3, 3-4, 3-5, 3-6, 3-7, 3-8, 3-9, 3-10, 3-11, 3-12, 3-13, 3-14, 3-15, 3-16, 3-17, 3-18, 3-19, 3-20, 3-21, 3-22, 3-23, 4-0, 4-1, 4-2, 4-3, 4-4, 4-5, 4-6, 4-7, 4-8, 4-9, 4-10, 4-11, 4-12, 4-13, 4-14, 4-15, 4-16, 4-17, 4-18, 4-19, 4-20, 4-21, 4-22, 4-23 not connected.
- ..TIMER: vector=0x31 pin1=2 pin2=-1
- Using local APIC timer interrupts.
- calibrating APIC timer ...
- ..... CPU clock speed is 2799.0701 MHz.
- ..... host bus clock speed is 199.0978 MHz.
- checking TSC synchronization across 4 CPUs: passed.
- Brought up 4 CPUs
- checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
- Looking for DSDT in initrd ...No customized DSDT found in initrd!
- Freeing initrd memory: 1338k freed
- NET: Registered protocol family 16
- PCI: PCI BIOS revision 2.10 entry at 0xfd7f7, last bus=6
- PCI: Using MMCONFIG
- mtrr: v2.0 (20020519)
- ACPI: Subsystem revision 20040326
- ACPI: Interpreter enabled
- ACPI: Using IOAPIC for interrupt routing
- ACPI: PCI Root Bridge [PCI0] (00:00)
- PCI: Probing PCI hardware (bus 00)
- PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
- Transparent bridge - 0000:00:1e.0
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3.PXHA._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3.PXHB._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
- ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 14 15)
- ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15)
- ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 14 15)
- ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 14 15)
- ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
- ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0, disabled.
- ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 14 15)
- ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 *10 11 14 15)
- Linux Plug and Play Support v0.97 (c) Adam Belay
- 00:00:02[A] -> 2-16 -> IRQ 16 level low
- 00:00:02[B] -> 2-17 -> IRQ 17 level low
- 00:00:02[C] -> 2-18 -> IRQ 18 level low
- 00:00:02[D] -> 2-19 -> IRQ 19 level low
- 00:00:1d[D] -> 2-23 -> IRQ 23 level low
- 00:03:01[A] -> 3-4 -> IRQ 28 level low
- 00:03:01[B] -> 3-5 -> IRQ 29 level low
- 00:03:01[C] -> 3-7 -> IRQ 31 level low
- 00:03:01[D] -> 3-6 -> IRQ 30 level low
- 00:03:02[A] -> 3-0 -> IRQ 24 level low
- 00:03:02[B] -> 3-1 -> IRQ 25 level low
- 00:03:02[C] -> 3-2 -> IRQ 26 level low
- 00:03:02[D] -> 3-3 -> IRQ 27 level low
- 00:04:01[A] -> 4-0 -> IRQ 48 level low
- 00:04:01[B] -> 4-1 -> IRQ 49 level low
- 00:04:01[C] -> 4-2 -> IRQ 50 level low
- 00:04:01[D] -> 4-3 -> IRQ 51 level low
- 00:06:04[A] -> 2-22 -> IRQ 22 level low
- number of MP IRQ sources: 15.
- number of IO-APIC #2 registers: 24.
- number of IO-APIC #3 registers: 24.
- number of IO-APIC #4 registers: 24.
- testing the IO APIC.......................
- IO APIC #2......
- .... register #00: 02000000
- ....... : physical APIC id: 02
- ....... : Delivery Type: 0
- ....... : LTS : 0
- .... register #01: 00178020
- ....... : max redirection entries: 0017
- ....... : PRQ implemented: 1
- ....... : IO APIC version: 0020
- .... IRQ redirection table:
- NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
- 00 000 00 1 0 0 0 0 0 0 00
- 01 0FF 0F 0 0 0 0 0 1 1 39
- 02 0FF 0F 0 0 0 0 0 1 1 31
- 03 0FF 0F 0 0 0 0 0 1 1 41
- 04 0FF 0F 0 0 0 0 0 1 1 49
- 05 0FF 0F 0 0 0 0 0 1 1 51
- 06 0FF 0F 0 0 0 0 0 1 1 59
- 07 0FF 0F 0 0 0 0 0 1 1 61
- 08 0FF 0F 0 0 0 0 0 1 1 69
- 09 0FF 0F 0 1 0 0 0 1 1 71
- 0a 0FF 0F 0 0 0 0 0 1 1 79
- 0b 0FF 0F 0 0 0 0 0 1 1 81
- 0c 0FF 0F 0 0 0 0 0 1 1 89
- 0d 0FF 0F 0 0 0 0 0 1 1 91
- 0e 0FF 0F 0 0 0 0 0 1 1 99
- 0f 0FF 0F 0 0 0 0 0 1 1 A1
- 10 00F 0F 1 1 0 1 0 1 1 A9
- 11 00F 0F 1 1 0 1 0 1 1 B1
- 12 00F 0F 1 1 0 1 0 1 1 B9
- 13 00F 0F 1 1 0 1 0 1 1 C1
- 14 000 00 1 0 0 0 0 0 0 00
- 15 000 00 1 0 0 0 0 0 0 00
- 16 00F 0F 1 1 0 1 0 1 1 72
- 17 00F 0F 1 1 0 1 0 1 1 C9
- IO APIC #3......
- .... register #00: 03000000
- ....... : physical APIC id: 03
- ....... : Delivery Type: 0
- ....... : LTS : 0
- .... register #01: 00178020
- ....... : max redirection entries: 0017
- ....... : PRQ implemented: 1
- ....... : IO APIC version: 0020
- .... register #02: 03000000
- ....... : arbitration: 03
- .... register #03: 00000001
- ....... : Boot DT : 1
- .... IRQ redirection table:
- NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
- 00 00F 0F 1 1 0 1 0 1 1 32
- 01 00F 0F 1 1 0 1 0 1 1 3A
- 02 00F 0F 1 1 0 1 0 1 1 42
- 03 00F 0F 1 1 0 1 0 1 1 4A
- 04 00F 0F 1 1 0 1 0 1 1 D1
- 05 00F 0F 1 1 0 1 0 1 1 D9
- 06 00F 0F 1 1 0 1 0 1 1 E9
- 07 00F 0F 1 1 0 1 0 1 1 E1
- 08 000 00 1 0 0 0 0 0 0 00
- 09 000 00 1 0 0 0 0 0 0 00
- 0a 000 00 1 0 0 0 0 0 0 00
- 0b 000 00 1 0 0 0 0 0 0 00
- 0c 000 00 1 0 0 0 0 0 0 00
- 0d 000 00 1 0 0 0 0 0 0 00
- 0e 000 00 1 0 0 0 0 0 0 00
- 0f 000 00 1 0 0 0 0 0 0 00
- 10 000 00 1 0 0 0 0 0 0 00
- 11 000 00 1 0 0 0 0 0 0 00
- 12 000 00 1 0 0 0 0 0 0 00
- 13 000 00 1 0 0 0 0 0 0 00
- 14 000 00 1 0 0 0 0 0 0 00
- 15 000 00 1 0 0 0 0 0 0 00
- 16 000 00 1 0 0 0 0 0 0 00
- 17 000 00 1 0 0 0 0 0 0 00
- IO APIC #4......
- .... register #00: 04000000
- ....... : physical APIC id: 04
- ....... : Delivery Type: 0
- ....... : LTS : 0
- .... register #01: 00178020
- ....... : max redirection entries: 0017
- ....... : PRQ implemented: 1
- ....... : IO APIC version: 0020
- .... register #02: 04000000
- ....... : arbitration: 04
- .... register #03: 00000001
- ....... : Boot DT : 1
- .... IRQ redirection table:
- NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
- 00 00F 0F 1 1 0 1 0 1 1 52
- 01 00F 0F 1 1 0 1 0 1 1 5A
- 02 00F 0F 1 1 0 1 0 1 1 62
- 03 00F 0F 1 1 0 1 0 1 1 6A
- 04 000 00 1 0 0 0 0 0 0 00
- 05 000 00 1 0 0 0 0 0 0 00
- 06 000 00 1 0 0 0 0 0 0 00
- 07 000 00 1 0 0 0 0 0 0 00
- 08 000 00 1 0 0 0 0 0 0 00
- 09 000 00 1 0 0 0 0 0 0 00
- 0a 000 00 1 0 0 0 0 0 0 00
- 0b 000 00 1 0 0 0 0 0 0 00
- 0c 000 00 1 0 0 0 0 0 0 00
- 0d 000 00 1 0 0 0 0 0 0 00
- 0e 000 00 1 0 0 0 0 0 0 00
- 0f 000 00 1 0 0 0 0 0 0 00
- 10 000 00 1 0 0 0 0 0 0 00
- 11 000 00 1 0 0 0 0 0 0 00
- 12 000 00 1 0 0 0 0 0 0 00
- 13 000 00 1 0 0 0 0 0 0 00
- 14 000 00 1 0 0 0 0 0 0 00
- 15 000 00 1 0 0 0 0 0 0 00
- 16 000 00 1 0 0 0 0 0 0 00
- 17 000 00 1 0 0 0 0 0 0 00
- IRQ to pin mappings:
- IRQ0 -> 0:2
- IRQ1 -> 0:1
- IRQ3 -> 0:3
- IRQ4 -> 0:4
- IRQ5 -> 0:5
- IRQ6 -> 0:6
- IRQ7 -> 0:7
- IRQ8 -> 0:8
- IRQ9 -> 0:9
- IRQ10 -> 0:10
- IRQ11 -> 0:11
- IRQ12 -> 0:12
- IRQ13 -> 0:13
- IRQ14 -> 0:14
- IRQ15 -> 0:15
- IRQ16 -> 0:16
- IRQ17 -> 0:17
- IRQ18 -> 0:18
- IRQ19 -> 0:19
- IRQ22 -> 0:22
- IRQ23 -> 0:23
- IRQ24 -> 1:0
- IRQ25 -> 1:1
- IRQ26 -> 1:2
- IRQ27 -> 1:3
- IRQ28 -> 1:4
- IRQ29 -> 1:5
- IRQ30 -> 1:6
- IRQ31 -> 1:7
- IRQ48 -> 2:0
- IRQ49 -> 2:1
- IRQ50 -> 2:2
- IRQ51 -> 2:3
- .................................... done.
- PCI: Using ACPI for IRQ routing
- PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
- vesafb: framebuffer at 0xd8000000, mapped to 0xf8808000, size 16384k
- vesafb: mode is 800x600x16, linelength=1600, pages=16
- vesafb: protected mode interface info at c000:4e0c
- vesafb: scrolling: redraw
- vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
- fb0: VESA VGA frame buffer device
- Simple Boot Flag at 0x39 set to 0x1
- apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
- apm: disabled - APM is not SMP safe.
- Starting balanced_irq
- Initial HugeTLB pages allocated: 0
- highmem bounce pool size: 64 pages
- VFS: Disk quotas dquot_6.5.1
- Initializing Cryptographic API
- isapnp: Scanning for PnP cards...
- isapnp: No Plug & Play device found
- silentjpeg size 28539 bytes,<6>...found (800x600, 18412 bytes, v3).
- Console: switching to colour frame buffer device 92x32
- Real Time Clock Driver v1.12
- Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
- ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
- Using cfq io scheduler
- Floppy drive(s): fd0 is 1.44M
- FDC 0 is a National Semiconductor PC87306
- RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
- loop: loaded (max 8 devices)
- Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
- ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
- ICH5: IDE controller at PCI slot 0000:00:1f.1
- ICH5: chipset revision 2
- ICH5: not 100% native mode: will probe irqs later
- ide0: BM-DMA at 0x14a0-0x14a7, BIOS settings: hda:DMA, hdb:pio
- ide1: BM-DMA at 0x14a8-0x14af, BIOS settings: hdc:pio, hdd:pio
- hda: SAMSUNG CD-ROM SC-148A, ATAPI CD/DVD-ROM drive
- ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
- ide-floppy driver 0.99.newide
- mice: PS/2 mouse device common for all mice
- input: PC Speaker
- serio: i8042 AUX port at 0x60,0x64 irq 12
- input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1
- serio: i8042 KBD port at 0x60,0x64 irq 1
- input: AT Translated Set 2 keyboard on isa0060/serio0
- md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
- NET: Registered protocol family 2
- IP: routing cache hash table of 16384 buckets, 128Kbytes
- TCP: Hash tables configured (established 524288 bind 65536)
- NET: Registered protocol family 1
- NET: Registered protocol family 8
- NET: Registered protocol family 20
- ACPI: (supports S0 S4 S5)
- md: Autodetecting RAID arrays.
- md: autorun ...
- md: ... autorun DONE.
- RAMDISK: Compressed image found at block 0
- VFS: Mounted root (ext2 filesystem).
- SCSI subsystem initialized
- Red Hat/Adaptec aacraid driver (1.1.2-lk1 Jul 2 2004)
- AAC0: kernel 4.1.4 build 7235
- AAC0: monitor 4.1.4 build 7235
- AAC0: bios 4.1.0 build 7235
- AAC0: serial bd87a1fafaf001
- scsi0 : aacraid
- Vendor: ADAPTEC Model: AAR-2410SA Mirro Rev: V1.0
- Type: Direct-Access ANSI SCSI revision: 02
- SCSI device sda: 312497920 512-byte hdwr sectors (159999 MB)
- sda: Write Protect is off
- sda: Mode Sense: 03 00 00 00
- SCSI device sda: drive cache: write through
- sda: sda1 sda2
- Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
- ReiserFS: sda2: found reiserfs format "3.6" with standard journal
- ReiserFS: sda2: using ordered data mode
- reiserfs: using flush barriers
- ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
- ReiserFS: sda2: checking transaction log (sda2)
- ReiserFS: sda2: replayed 16 transactions in 9 seconds
- reiserfs: disabling flush barriers on sda2
- ReiserFS: sda2: Using r5 hash to sort names
- VFS: Mounted root (reiserfs filesystem) readonly.
- Trying to move old root to /initrd ... failed
- Unmounting old root
- Trying to free ramdisk memory ... okay
- Freeing unused kernel memory: 244k freed
- ReiserFS: sda2: Removing [15 19674057 0x0 SD]..done
- ReiserFS: sda2: Removing [14358 10430120 0x0 SD]..done
- ReiserFS: sda2: There were 2 uncompleted unlinks/truncates. Completed
- md: Autodetecting RAID arrays.
- md: autorun ...
- md: ... autorun DONE.
- device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
- subfs 0.9
- Adding 2096440k swap on /dev/sda1. Priority:42 extents:1
- NET: Registered protocol family 10
- IPv6 over IPv4 tunneling driver
- Broadcom Gigabit Ethernet Driver bcm5700 with Broadcom NIC Extension (NICE) ver. 7.2.24 (04/23/04)
- PCI: Setting latency timer of device 0000:01:00.0 to 64
- eth0: Broadcom BCM5721 1000Base-T PCI Express found at mem d0100000, IRQ 16, node addr 000d60152b41
- eth0: Broadcom BCM5750 Integrated Copper transceiver found
- eth0: Scatter-gather ON, 64-bit DMA ON, Tx Checksum ON, Rx Checksum ON, 802.1Q VLAN ON, TSO ON
- usbcore: registered new driver usbfs
- usbcore: registered new driver hub
- NET: Registered protocol family 17
- bcm5700: eth0 NIC Link is UP, 1000 Mbps full duplex
- USB Universal Host Controller Interface driver v2.2
- uhci_hcd 0000:00:1d.0: UHCI Host Controller
- PCI: Setting latency timer of device 0000:00:1d.0 to 64
- uhci_hcd 0000:00:1d.0: irq 16, io base 00001400
- hw_random: RNG not detected
- uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
- usb usb1: Product: UHCI Host Controller
- usb usb1: Manufacturer: Linux 2.6.5-7.97-smp uhci_hcd
- usb usb1: SerialNumber: 0000:00:1d.0
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 2 ports detected
- uhci_hcd 0000:00:1d.1: UHCI Host Controller
- PCI: Setting latency timer of device 0000:00:1d.1 to 64
- uhci_hcd 0000:00:1d.1: irq 19, io base 00001420
- uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
- usb usb2: Product: UHCI Host Controller
- usb usb2: Manufacturer: Linux 2.6.5-7.97-smp uhci_hcd
- usb usb2: SerialNumber: 0000:00:1d.1
- hub 2-0:1.0: USB hub found
- hub 2-0:1.0: 2 ports detected
- uhci_hcd 0000:00:1d.2: UHCI Host Controller
- PCI: Setting latency timer of device 0000:00:1d.2 to 64
- uhci_hcd 0000:00:1d.2: irq 18, io base 00001440
- uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
- usb usb3: Product: UHCI Host Controller
- usb usb3: Manufacturer: Linux 2.6.5-7.97-smp uhci_hcd
- usb usb3: SerialNumber: 0000:00:1d.2
- hub 3-0:1.0: USB hub found
- hub 3-0:1.0: 2 ports detected
- uhci_hcd 0000:00:1d.3: UHCI Host Controller
- PCI: Setting latency timer of device 0000:00:1d.3 to 64
- uhci_hcd 0000:00:1d.3: irq 16, io base 00001460
- uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
- usb usb4: Product: UHCI Host Controller
- usb usb4: Manufacturer: Linux 2.6.5-7.97-smp uhci_hcd
- usb usb4: SerialNumber: 0000:00:1d.3
- hub 4-0:1.0: USB hub found
- hub 4-0:1.0: 2 ports detected
- ehci_hcd 0000:00:1d.7: EHCI Host Controller
- PCI: Setting latency timer of device 0000:00:1d.7 to 64
- ehci_hcd 0000:00:1d.7: irq 23, pci mem f9905000
- ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
- PCI: cache line size of 128 is not supported by device 0000:00:1d.7
- ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29
- usb usb5: Product: EHCI Host Controller
- usb usb5: Manufacturer: Linux 2.6.5-7.97-smp ehci_hcd
- usb usb5: SerialNumber: 0000:00:1d.7
- hub 5-0:1.0: USB hub found
- hub 5-0:1.0: 8 ports detected
- scsi1 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.11
- <Adaptec AIC7902 Ultra320 SCSI adapter>
- aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI 33 or 66Mhz, 512 SCBs
- ACPI: Power Button (FF) [PWRF]
- ACPI: Processor [CPU0] (supports C1, 8 throttling states)
- ACPI: Processor [CPU1] (supports C1, 8 throttling states)
- ACPI: Processor [CPU2] (supports C1, 8 throttling states)
- ACPI: Processor [CPU3] (supports C1, 8 throttling states)
- eth0: no IPv6 routers present
- Non-volatile memory driver v1.2
- end_request: I/O error, dev fd0, sector 0
- end_request: I/O error, dev fd0, sector 0
- hda: ATAPI 48X CD-ROM drive, 128kB Cache
- Uniform CD-ROM driver Revision: 3.20
- st: Version 20040318, fixed bufsize 32768, s/g segs 256
- Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
- BIOS EDD facility v0.13 2004-Mar-09, 1 devices found
- Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
- parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
- parport0: irq 7 detected
- lp0: using parport0 (polling).
- drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
- usbcore: registered new driver usbserial
- drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
- scsi2 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.11
- <Adaptec AIC7902 Ultra320 SCSI adapter>
- aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI 33 or 66Mhz, 512 SCBs
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement