Advertisement
Guest User

ConnorBehan

a guest
Jan 8th, 2009
419
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 30.09 KB | None | 0 0
  1. Linux version 2.6.27-ARCH (root@T-POWA-LX) (gcc version 4.3.2 (GCC) ) #1 SMP PREEMPT Sun Dec 21 09:31:10 UTC 2008
  2. PAT WC disabled due to known CPU erratum.
  3. BIOS-provided physical RAM map:
  4. BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
  5. BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
  6. BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
  7. BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
  8. BIOS-e820: 000000001fff0000 - 000000001fffec00 (ACPI data)
  9. BIOS-e820: 000000001fffec00 - 0000000020000000 (ACPI NVS)
  10. BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
  11. DMI 2.3 present.
  12. last_pfn = 0x1fff0 max_arch_pfn = 0x100000
  13. kernel direct mapping tables up to 1fff0000 @ 7000-d000
  14. RAMDISK: 00e4f000 - 00effeba
  15. ACPI: RSDP 000F7160, 0014 (r0 PTLTD )
  16. ACPI: RSDT 1FFF53D5, 002C (r1 PTLTD RSDT 6040000 LTP 0)
  17. ACPI: FACP 1FFFEB65, 0074 (r1 IBM TP-13 6040000 0)
  18. ACPI: DSDT 1FFF5401, 9764 (r1 IBM TP-13 6040000 MSFT 100000C)
  19. ACPI: FACS 1FFFF000, 0040
  20. ACPI: BOOT 1FFFEBD9, 0027 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
  21. 0MB HIGHMEM available.
  22. 511MB LOWMEM available.
  23. mapped low ram: 0 - 1fff0000
  24. low ram: 00000000 - 1fff0000
  25. bootmap 00002000 - 00006000
  26. (9 early reservations) ==> bootmem [0000000000 - 001fff0000]
  27. #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
  28. #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
  29. #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
  30. #3 [0000100000 - 000050d240] TEXT DATA BSS ==> [0000100000 - 000050d240]
  31. #4 [0000e4f000 - 0000effeba] RAMDISK ==> [0000e4f000 - 0000effeba]
  32. #5 [000050e000 - 0000511000] INIT_PG_TABLE ==> [000050e000 - 0000511000]
  33. #6 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
  34. #7 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
  35. #8 [0000002000 - 0000006000] BOOTMAP ==> [0000002000 - 0000006000]
  36. Zone PFN ranges:
  37. DMA 0x00000000 -> 0x00001000
  38. Normal 0x00001000 -> 0x0001fff0
  39. HighMem 0x0001fff0 -> 0x0001fff0
  40. Movable zone start PFN for each node
  41. early_node_map[2] active PFN ranges
  42. 0: 0x00000000 -> 0x0000009f
  43. 0: 0x00000100 -> 0x0001fff0
  44. On node 0 totalpages: 130959
  45. free_area_init_node: node 0, pgdat c03da300, node_mem_map c1000000
  46. DMA zone: 3967 pages, LIFO batch:0
  47. Normal zone: 125968 pages, LIFO batch:31
  48. ACPI: PM-Timer IO Port: 0x1008
  49. SMP: Allowing 1 CPUs, 0 hotplug CPUs
  50. Local APIC disabled by BIOS -- you can enable it with "lapic"
  51. mapped APIC to ffffb000 (01402000)
  52. PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
  53. PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
  54. PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
  55. Allocating PCI resources starting at 30000000 (gap: 20000000:dff80000)
  56. PERCPU: Allocating 39324 bytes of per cpu data
  57. NR_CPUS: 16, nr_cpu_ids: 1, nr_node_ids 1
  58. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129935
  59. Kernel command line: BOOT_IMAGE=arch ro root=802 hpet=force pci=assign-busses acpi_osi=Linux
  60. ACPI: Added _OSI(Linux)
  61. Enabling fast FPU save and restore... done.
  62. Enabling unmasked SIMD FPU exception support... done.
  63. Initializing CPU#0
  64. PID hash table entries: 2048 (order: 11, 8192 bytes)
  65. TSC: PIT calibration confirmed by PMTIMER.
  66. TSC: using PMTIMER calibration value
  67. Detected 896.668 MHz processor.
  68. Console: colour VGA+ 80x25
  69. console [tty0] enabled
  70. Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  71. Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  72. Memory: 514252k/524224k available (2157k kernel code, 9456k reserved, 843k data, 284k init, 0k highmem)
  73. virtual kernel memory layout:
  74. fixmap : 0xffee8000 - 0xfffff000 (1116 kB)
  75. pkmap : 0xff800000 - 0xffc00000 (4096 kB)
  76. vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
  77. lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
  78. .init : 0xc03f5000 - 0xc043c000 ( 284 kB)
  79. .data : 0xc031b6d6 - 0xc03ee320 ( 843 kB)
  80. .text : 0xc0100000 - 0xc031b6d6 (2157 kB)
  81. Checking if this processor honours the WP bit even in supervisor mode...Ok.
  82. CPA: page pool initialized 1 of 1 pages preallocated
  83. SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  84. Calibrating delay loop (skipped), value calculated using timer frequency.. 1794.05 BogoMIPS (lpj=2988893)
  85. Security Framework initialized
  86. Mount-cache hash table entries: 512
  87. CPU: L1 I cache: 16K, L1 D cache: 16K
  88. CPU: L2 cache: 256K
  89. Intel machine check architecture supported.
  90. Intel machine check reporting enabled on CPU#0.
  91. Checking 'hlt' instruction... OK.
  92. SMP alternatives: switching to UP code
  93. Freeing SMP alternatives: 9k freed
  94. ACPI: Core revision 20080609
  95. ACPI: Checking initramfs for custom DSDT
  96. ACPI: setting ELCR to 0200 (from 0800)
  97. weird, boot CPU (#0) not listedby the BIOS.
  98. SMP motherboard not detected.
  99. Local APIC not detected. Using dummy APIC emulation.
  100. SMP disabled
  101. Brought up 1 CPUs
  102. Total of 1 processors activated (1794.05 BogoMIPS).
  103. net_namespace: 832 bytes
  104. Booting paravirtualized kernel on bare hardware
  105. NET: Registered protocol family 16
  106. ACPI: bus type pci registered
  107. PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=14
  108. PCI: Using configuration type 1 for base access
  109. ACPI: EC: Look up EC in DSDT
  110. ACPI: EC: non-query interrupt received, switching to interrupt mode
  111. ACPI: Interpreter enabled
  112. ACPI: (supports S0 S1 S3 S4 S5)
  113. ACPI: Using PIC for interrupt routing
  114. ACPI: EC: GPE = 0x9, I/O: command/status = 0x66, data = 0x62
  115. ACPI: EC: driver started in interrupt mode
  116. ACPI: PCI Root Bridge [PCI0] (0000:00)
  117. PCI: 0000:00:00.0 reg 10 32bit mmio: [f4000000, f7ffffff]
  118. PCI: 0000:00:02.0 reg 10 32bit mmio: [50000000, 50000fff]
  119. pci 0000:00:02.0: supports D1
  120. pci 0000:00:02.0: supports D2
  121. pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
  122. pci 0000:00:02.0: PME# disabled
  123. PCI: 0000:00:02.1 reg 10 32bit mmio: [50100000, 50100fff]
  124. pci 0000:00:02.1: supports D1
  125. pci 0000:00:02.1: supports D2
  126. pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
  127. pci 0000:00:02.1: PME# disabled
  128. PCI: 0000:00:03.0 reg 10 32bit mmio: [f0120000, f0120fff]
  129. PCI: 0000:00:03.0 reg 14 io port: [1800, 183f]
  130. PCI: 0000:00:03.0 reg 18 32bit mmio: [f0100000, f011ffff]
  131. PCI: 0000:00:03.0 reg 30 32bit mmio: [0, fffff]
  132. pci 0000:00:03.0: supports D1
  133. pci 0000:00:03.0: supports D2
  134. pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
  135. pci 0000:00:03.0: PME# disabled
  136. PCI: 0000:00:03.1 reg 10 io port: [1840, 1847]
  137. PCI: 0000:00:03.1 reg 14 32bit mmio: [f0121000, f0121fff]
  138. pci 0000:00:03.1: supports D1
  139. pci 0000:00:03.1: supports D2
  140. pci 0000:00:03.1: PME# supported from D0 D1 D2 D3hot D3cold
  141. pci 0000:00:03.1: PME# disabled
  142. pci 0000:00:04.0: supports D1
  143. pci 0000:00:04.0: supports D2
  144. PCI: 0000:00:05.0 reg 10 32bit mmio: [f0122000, f0122fff]
  145. PCI: 0000:00:05.0 reg 14 32bit mmio: [f0000000, f00fffff]
  146. pci 0000:00:05.0: supports D1
  147. pci 0000:00:05.0: supports D2
  148. PCI: 0000:00:07.1 reg 20 io port: [1850, 185f]
  149. PCI: 0000:00:07.2 reg 20 io port: [1860, 187f]
  150. pci 0000:00:07.3: quirk: region 1000-103f claimed by PIIX4 ACPI
  151. pci 0000:00:07.3: quirk: region 1040-104f claimed by PIIX4 SMB
  152. pci 0000:00:07.3: PIIX4 devres C PIO at 15e8-15ef
  153. pci 0000:00:07.3: PIIX4 devres I PIO at 03f0-03f7
  154. pci 0000:00:07.3: PIIX4 devres J PIO at 002e-002f
  155. PCI: 0000:01:00.0 reg 10 32bit mmio: [f8000000, fbffffff]
  156. PCI: 0000:01:00.0 reg 14 io port: [2000, 20ff]
  157. PCI: 0000:01:00.0 reg 18 32bit mmio: [f0200000, f0203fff]
  158. PCI: 0000:01:00.0 reg 30 32bit mmio: [0, 1ffff]
  159. pci 0000:01:00.0: supports D1
  160. pci 0000:01:00.0: supports D2
  161. PCI: bridge 0000:00:01.0 io port: [2000, 2fff]
  162. PCI: bridge 0000:00:01.0 32bit mmio: [f0200000, f02fffff]
  163. PCI: bridge 0000:00:01.0 32bit mmio pref: [f8000000, fbffffff]
  164. PCI: 0000:0a:01.0 reg 10 io port: [3020, 3027]
  165. PCI: 0000:0a:01.0 reg 14 io port: [3014, 3017]
  166. PCI: 0000:0a:01.0 reg 18 io port: [3018, 301f]
  167. PCI: 0000:0a:01.0 reg 1c io port: [3010, 3013]
  168. PCI: 0000:0a:01.0 reg 20 io port: [3000, 300f]
  169. pci 0000:0a:01.0: supports D1
  170. pci 0000:0a:01.0: supports D2
  171. PCI: 0000:0a:02.0 reg 10 32bit mmio: [52000000, 52000fff]
  172. pci 0000:0a:02.0: supports D1
  173. pci 0000:0a:02.0: supports D2
  174. pci 0000:0a:02.0: PME# supported from D0 D1 D2 D3hot D3cold
  175. pci 0000:0a:02.0: PME# disabled
  176. PCI: 0000:0a:02.1 reg 10 32bit mmio: [53000000, 53000fff]
  177. pci 0000:0a:02.1: supports D1
  178. pci 0000:0a:02.1: supports D2
  179. pci 0000:0a:02.1: PME# supported from D0 D1 D2 D3hot D3cold
  180. pci 0000:0a:02.1: PME# disabled
  181. pci 0000:00:04.0: transparent bridge
  182. PCI: bridge 0000:00:04.0 io port: [0, fff]
  183. PCI: bridge 0000:00:04.0 32bit mmio: [0, fffff]
  184. PCI: bridge 0000:00:04.0 32bit mmio pref: [0, fffff]
  185. bus 00 -> node 0
  186. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  187. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
  188. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.DOCK._PRT]
  189. ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
  190. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
  191. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
  192. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
  193. ACPI: Power Resource [PSER] (off)
  194. ACPI: Power Resource [PSIO] (on)
  195. Linux Plug and Play Support v0.97 (c) Adam Belay
  196. pnp: PnP ACPI init
  197. ACPI: bus type pnp registered
  198. pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
  199. pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
  200. pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
  201. pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
  202. pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
  203. pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
  204. pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
  205. pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
  206. pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
  207. pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
  208. pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
  209. pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
  210. pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
  211. pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
  212. pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
  213. pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
  214. pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
  215. pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
  216. pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
  217. pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
  218. pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
  219. pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
  220. pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
  221. pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
  222. pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
  223. pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
  224. pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
  225. pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
  226. pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
  227. pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
  228. pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
  229. pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
  230. pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
  231. pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
  232. pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
  233. pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
  234. pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
  235. pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
  236. pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
  237. pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
  238. pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
  239. pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
  240. pnp 00:02: io resource (0x22-0x22) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
  241. pnp 00:02: io resource (0x92-0x92) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
  242. pnp 00:02: io resource (0xb2-0xb3) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
  243. pnp 00:0a: io resource (0x2e-0x2f) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
  244. pnp: PnP ACPI: found 15 devices
  245. ACPI: ACPI bus type pnp unregistered
  246. PCI: Using ACPI for IRQ routing
  247. pci 0000:00:04.0: BAR 7: can't allocate resource
  248. pci 0000:00:04.0: BAR 8: can't allocate resource
  249. pci 0000:00:04.0: BAR 9: can't allocate resource
  250. NetLabel: Initializing
  251. NetLabel: domain hash size = 128
  252. NetLabel: protocols = UNLABELED CIPSOv4
  253. NetLabel: unlabeled traffic allowed by default
  254. ACPI: RTC can wake from S4
  255. system 00:00: iomem range 0x100000-0x1fffffff could not be reserved
  256. system 00:00: iomem range 0xfff80000-0xffffffff could not be reserved
  257. system 00:02: ioport range 0x1000-0x103f has been reserved
  258. system 00:02: ioport range 0x1040-0x104f has been reserved
  259. system 00:02: ioport range 0xfe00-0xfe0f has been reserved
  260. system 00:09: ioport range 0x15e0-0x15ef has been reserved
  261. pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
  262. pci 0000:00:01.0: IO window: 0x2000-0x2fff
  263. pci 0000:00:01.0: MEM window: 0xf0200000-0xf02fffff
  264. pci 0000:00:01.0: PREFETCH window: 0x000000f8000000-0x000000fbffffff
  265. pci 0000:00:02.0: CardBus bridge, secondary bus 0000:02
  266. pci 0000:00:02.0: IO window: 0x001400-0x0014ff
  267. pci 0000:00:02.0: IO window: 0x001c00-0x001cff
  268. pci 0000:00:02.0: PREFETCH window: 0x30000000-0x33ffffff
  269. pci 0000:00:02.0: MEM window: 0x34000000-0x37ffffff
  270. pci 0000:00:02.1: CardBus bridge, secondary bus 0000:06
  271. pci 0000:00:02.1: IO window: 0x003400-0x0034ff
  272. pci 0000:00:02.1: IO window: 0x003800-0x0038ff
  273. pci 0000:00:02.1: PREFETCH window: 0x38000000-0x3bffffff
  274. pci 0000:00:02.1: MEM window: 0x3c000000-0x3fffffff
  275. pci 0000:0a:02.0: CardBus bridge, secondary bus 0000:0b
  276. pci 0000:0a:02.0: IO window: 0x004000-0x0040ff
  277. pci 0000:0a:02.0: IO window: 0x004400-0x0044ff
  278. pci 0000:0a:02.0: PREFETCH window: 0x48000000-0x4bffffff
  279. pci 0000:0a:02.0: MEM window: 0x40000000-0x43ffffff
  280. pci 0000:0a:02.1: CardBus bridge, secondary bus 0000:0f
  281. pci 0000:0a:02.1: IO window: 0x004800-0x0048ff
  282. pci 0000:0a:02.1: IO window: 0x004c00-0x004cff
  283. pci 0000:0a:02.1: PREFETCH window: 0x4c000000-0x4fffffff
  284. pci 0000:0a:02.1: MEM window: 0x44000000-0x47ffffff
  285. pci 0000:00:04.0: PCI bridge, secondary bus 0000:0a
  286. pci 0000:00:04.0: IO window: 0x4000-0x4fff
  287. pci 0000:00:04.0: MEM window: 0x40000000-0x47ffffff
  288. pci 0000:00:04.0: PREFETCH window: 0x00000048000000-0x0000004fffffff
  289. pci 0000:00:02.0: power state changed by ACPI to D0
  290. ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
  291. PCI: setting IRQ 11 as level-triggered
  292. pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
  293. pci 0000:00:02.1: power state changed by ACPI to D0
  294. ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
  295. pci 0000:00:02.1: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
  296. ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
  297. pci 0000:0a:02.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
  298. pci 0000:0a:02.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
  299. bus: 00 index 0 io port: [0, ffff]
  300. bus: 00 index 1 mmio: [0, ffffffff]
  301. bus: 01 index 0 io port: [2000, 2fff]
  302. bus: 01 index 1 mmio: [f0200000, f02fffff]
  303. bus: 01 index 2 mmio: [f8000000, fbffffff]
  304. bus: 01 index 3 mmio: [0, 0]
  305. bus: 02 index 0 io port: [1400, 14ff]
  306. bus: 02 index 1 io port: [1c00, 1cff]
  307. bus: 02 index 2 mmio: [30000000, 33ffffff]
  308. bus: 02 index 3 mmio: [34000000, 37ffffff]
  309. bus: 06 index 0 io port: [3400, 34ff]
  310. bus: 06 index 1 io port: [3800, 38ff]
  311. bus: 06 index 2 mmio: [38000000, 3bffffff]
  312. bus: 06 index 3 mmio: [3c000000, 3fffffff]
  313. bus: 0a index 0 io port: [4000, 4fff]
  314. bus: 0a index 1 mmio: [40000000, 47ffffff]
  315. bus: 0a index 2 mmio: [48000000, 4fffffff]
  316. bus: 0a index 3 io port: [0, ffff]
  317. bus: 0a index 4 mmio: [0, ffffffff]
  318. bus: 0b index 0 io port: [4000, 40ff]
  319. bus: 0b index 1 io port: [4400, 44ff]
  320. bus: 0b index 2 mmio: [48000000, 4bffffff]
  321. bus: 0b index 3 mmio: [40000000, 43ffffff]
  322. bus: 0f index 0 io port: [4800, 48ff]
  323. bus: 0f index 1 io port: [4c00, 4cff]
  324. bus: 0f index 2 mmio: [4c000000, 4fffffff]
  325. bus: 0f index 3 mmio: [44000000, 47ffffff]
  326. NET: Registered protocol family 2
  327. IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  328. TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  329. TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
  330. TCP: Hash tables configured (established 16384 bind 16384)
  331. TCP reno registered
  332. NET: Registered protocol family 1
  333. Unpacking initramfs... done
  334. Freeing initrd memory: 707k freed
  335. Simple Boot Flag at 0x35 set to 0x1
  336. IBM machine detected. Enabling interrupts during APM calls.
  337. apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
  338. apm: overridden by ACPI.
  339. VFS: Disk quotas dquot_6.5.1
  340. Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  341. msgmni has been set to 1006
  342. Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
  343. io scheduler noop registered
  344. io scheduler anticipatory registered
  345. io scheduler deadline registered
  346. io scheduler cfq registered (default)
  347. pci 0000:00:00.0: Limiting direct PCI/PCI transfers
  348. pci 0000:00:03.0: Firmware left e100 interrupts enabled; disabling
  349. pci 0000:01:00.0: Boot video device
  350. isapnp: Scanning for PnP cards...
  351. isapnp: No Plug & Play device found
  352. Serial: 8250/16550 driver4 ports, IRQ sharing disabled
  353. serial 00:0c: activated
  354. 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  355. serial 0000:00:03.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
  356. input: Macintosh mouse button emulation as /class/input/input0
  357. PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
  358. serio: i8042 KBD port at 0x60,0x64 irq 1
  359. serio: i8042 AUX port at 0x60,0x64 irq 12
  360. mice: PS/2 mouse device common for all mice
  361. cpuidle: using governor ladder
  362. cpuidle: using governor menu
  363. TCP cubic registered
  364. NET: Registered protocol family 17
  365. Using IPI No-Shortcut mode
  366. registered taskstats version 1
  367. Freeing unused kernel memory: 284k freed
  368. input: AT Translated Set 2 keyboard as /class/input/input1
  369. ACPI: ACPI Dock Station Driver
  370. Switched to high resolution mode on CPU 0
  371. SCSI subsystem initialized
  372. libata version 3.00 loaded.
  373. ata_piix 0000:00:07.1: version 2.12
  374. scsi0 : ata_piix
  375. scsi1 : ata_piix
  376. ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1850 irq 14
  377. ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1858 irq 15
  378. ata1.00: ATA-6: TOSHIBA MK1032GAX, AB211A, max UDMA/100
  379. ata1.00: 195371568 sectors, multi 16: LBA48
  380. ata1.00: configured for UDMA/33
  381. ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T20L, NR02, max UDMA/33
  382. ata2.00: configured for UDMA/33
  383. scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1032GA AB21 PQ: 0 ANSI: 5
  384. scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20L NR02 PQ: 0 ANSI: 5
  385. Driver 'sd' needs updating - please use bus_type methods
  386. sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
  387. sd 0:0:0:0: [sda] Write Protect is off
  388. sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  389. sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  390. sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
  391. sd 0:0:0:0: [sda] Write Protect is off
  392. sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  393. sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  394. sda:<6>pata_acpi 0000:0a:01.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
  395. pata_acpi 0000:0a:01.0: PCI INT A disabled
  396. sda1 sda2 sda3 sda4
  397. pata_cmd64x 0000:0a:01.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
  398. scsi2 : pata_cmd64x
  399. sd 0:0:0:0: [sda] Attached SCSI disk
  400. scsi3 : pata_cmd64x
  401. ata3: PATA max UDMA/66 cmd 0x3020 ctl 0x3014 bmdma 0x3000 irq 11
  402. ata4: PATA max UDMA/66 cmd 0x3018 ctl 0x3010 bmdma 0x3008 irq 11
  403. pata_cmd64x: active 10 recovery 10 setup 3.
  404. pata_cmd64x: active 10 recovery 10 setup 3.
  405. pata_cmd64x: active 10 recovery 10 setup 3.
  406. pata_cmd64x: active 10 recovery 10 setup 3.
  407. ReiserFS: sda2: found reiserfs format "3.6" with standard journal
  408. ReiserFS: sda2: using ordered data mode
  409. ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
  410. ReiserFS: sda2: checking transaction log (sda2)
  411. ReiserFS: sda2: Using r5 hash to sort names
  412. rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
  413. rtc0: alarms up to one month, y3k
  414. Non-volatile memory driver v1.2
  415. thinkpad_acpi: ThinkPad ACPI Extras v0.21
  416. thinkpad_acpi: http://ibm-acpi.sf.net/
  417. thinkpad_acpi: ThinkPad BIOS 13ET14WW (1.00c), EC unknown
  418. Registered led device: tpacpi::thinklight
  419. thinkpad_acpi: another device driver is already handling bay events
  420. thinkpad_acpi: disabling subdriver bay
  421. Registered led device: tpacpi::power
  422. Registered led device: tpacpi:orange:batt
  423. Registered led device: tpacpi:green:batt
  424. Registered led device: tpacpi::dock_active
  425. Registered led device: tpacpi::bay_active
  426. Registered led device: tpacpi::dock_batt
  427. Registered led device: tpacpi::unknown_led
  428. Registered led device: tpacpi::standby
  429. input: ThinkPad Extra Buttons as /class/input/input2
  430. pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  431. acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
  432. acpiphp_glue: can't get bus number, assuming 0
  433. decode_hpp: Could not get hotplug parameters. Use defaults
  434. acpiphp: Slot [1] registered
  435. e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
  436. e100: Copyright(c) 1999-2006 Intel Corporation
  437. e100 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
  438. e100 0000:00:03.0: PME# disabled
  439. e100: eth0: e100_probe: addr 0xf0120000, irq 11, MAC addr 00:03:47:0f:de:3d
  440. eepro100.c:v1.09j-t 9/29/99 Donald Becker
  441. eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <[email protected]> and others
  442. Sound Fusion CS46xx 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
  443. gameport: CS46xx Gameport is pci0000:00:05.0/gameport0, speed 1807kHz
  444. Linux agpgart interface v0.103
  445. agpgart-intel 0000:00:00.0: Intel 440BX Chipset
  446. agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf4000000
  447. [drm] Initialized drm 1.1.0 20060810
  448. pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
  449. [drm] Initialized r128 2.5.0 20030725 on minor 0
  450. ath_hal: module license 'Proprietary' taints kernel.
  451. AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
  452. fuse init (API version 7.9)
  453. ACPI: AC Adapter [AC] (on-line)
  454. ACPI: Battery Slot [BAT0] (battery present)
  455. input: Power Button (FF) as /class/input/input3
  456. ACPI: Power Button (FF) [PWRF]
  457. input: Lid Switch as /class/input/input4
  458. ACPI: Lid Switch [LID]
  459. input: Sleep Button (CM) as /class/input/input5
  460. ACPI: Sleep Button (CM) [SLPB]
  461. ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
  462. processor ACPI0007:00: registered as cooling_device0
  463. ACPI: Processor [CPU] (supports 8 throttling states)
  464. thermal LNXTHERM:01: registered as thermal_zone0
  465. ACPI: Thermal Zone [THM0] (41 C)
  466. Marking TSC unstable due to TSC halts in idle
  467. sd 0:0:0:0: Attached scsi generic sg0 type 0
  468. scsi 1:0:0:0: Attached scsi generic sg1 type 5
  469. shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
  470. Yenta: CardBus bridge found at 0000:00:02.0 [1014:0130]
  471. Yenta: Using INTVAL to route CSC interrupts to PCI
  472. Yenta: Routing CardBus interrupts to PCI
  473. Yenta TI: socket 0000:00:02.0, mfunc 0x00001000, devctl 0x66
  474. Yenta: ISA IRQ mask 0x04b8, PCI irq 11
  475. Socket status: 30000006
  476. Yenta: CardBus bridge found at 0000:00:02.1 [1014:0130]
  477. Yenta: Using INTVAL to route CSC interrupts to PCI
  478. Yenta: Routing CardBus interrupts to PCI
  479. Yenta TI: socket 0000:00:02.1, mfunc 0x00001000, devctl 0x66
  480. Yenta: ISA IRQ mask 0x04b8, PCI irq 11
  481. Socket status: 30000020
  482. Yenta: CardBus bridge found at 0000:0a:02.0 [1014:0148]
  483. Yenta: Using INTVAL to route CSC interrupts to PCI
  484. Yenta: Routing CardBus interrupts to PCI
  485. Yenta TI: socket 0000:0a:02.0, mfunc 0x00001002, devctl 0x66
  486. Yenta: ISA IRQ mask 0x04b8, PCI irq 11
  487. Socket status: 30000006
  488. pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
  489. cs: IO port probe 0x4000-0x4fff: clean.
  490. pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x47ffffff
  491. pcmcia: parent PCI bridge Memory window: 0x48000000 - 0x4fffffff
  492. Yenta: CardBus bridge found at 0000:0a:02.1 [1014:0148]
  493. Yenta: Using INTVAL to route CSC interrupts to PCI
  494. Yenta: Routing CardBus interrupts to PCI
  495. Yenta TI: socket 0000:0a:02.1, mfunc 0x00001002, devctl 0x66
  496. spurious 8259A interrupt: IRQ7.
  497. usbcore: registered new interface driver usbfs
  498. usbcore: registered new interface driver hub
  499. Yenta: ISA IRQ mask 0x04b8, PCI irq 11
  500. Socket status: 30000006
  501. pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
  502. cs: IO port probe 0x4000-0x4fff: clean.
  503. pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x47ffffff
  504. pcmcia: parent PCI bridge Memory window: 0x48000000 - 0x4fffffff
  505. pccard: CardBus card inserted into slot 1
  506. PCI: 0000:06:00.0 reg 10 32bit mmio: [0, ffff]
  507. ath_pci 0000:06:00.0: enabling device (0000 -> 0002)
  508. ath_pci 0000:06:00.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
  509. usbcore: registered new device driver usb
  510. Driver 'sr' needs updating - please use bus_type methods
  511. sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
  512. Uniform CD-ROM driver Revision: 3.20
  513. sr 1:0:0:0: Attached scsi CD-ROM sr0
  514. input: PC Speaker as /class/input/input6
  515. request region #1
  516. isp1760: probe of 0000:00:07.3 failed with error -16
  517. USB Universal Host Controller Interface driver v3.0
  518. ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
  519. uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
  520. uhci_hcd 0000:00:07.2: UHCI Host Controller
  521. uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
  522. uhci_hcd 0000:00:07.2: irq 11, io base 0x00001860
  523. usb usb1: configuration #1 chosen from 1 choice
  524. hub 1-0:1.0: USB hub found
  525. hub 1-0:1.0: 2 ports detected
  526. usb 1-1: new full speed USB device using uhci_hcd and address 2
  527. usb 1-1: configuration #1 chosen from 1 choice
  528. hub 1-1:1.0: USB hub found
  529. hub 1-1:1.0: 4 ports detected
  530. Error: Driver 'pcspkr' is already registered, aborting...
  531. input: Video Bus as /class/input/input7
  532. ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
  533. piix4_smbus 0000:00:07.3: IBM system detected; this module may corrupt your serial eeprom! Refusing to load module!
  534. piix4_smbus: probe of 0000:00:07.3 failed with error -1
  535. usb 1-1.3: new low speed USB device using uhci_hcd and address 3
  536. usb 1-1.3: configuration #1 chosen from 1 choice
  537. NET: Registered protocol family 23
  538. IBM TrackPoint firmware: 0x0e, buttons: 3/3
  539. input: TPPS/2 IBM TrackPoint as /class/input/input8
  540. parport_pc 00:0d: activated
  541. parport_pc 00:0d: reported by Plug and Play ACPI
  542. parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
  543. nsc-ircc 00:0e: activated
  544. nsc-ircc, chip->init
  545. nsc-ircc, Found chip at base=0x02e
  546. nsc-ircc, driver loaded (Dag Brattli)
  547. IrDA: Registered device irda0
  548. nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
  549. PPP generic driver version 2.4.2
  550. lp0: using parport0 (interrupt-driven).
  551. ppdev: user-space parallel port driver
  552. MadWifi: ath_attach: Switching rfkill capability off.
  553. wifi0: Atheros AR2413 chip found (MAC 7.8, PHY 2112A 4.5, Radio 5.6)
  554. ath_pci: wifi0: Atheros 5212: mem=0x3c000000, irq=11
  555. cs: IO port probe 0x100-0x3af: clean.
  556. cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
  557. cs: IO port probe 0x820-0x8ff: clean.
  558. cs: IO port probe 0xc00-0xcf7: clean.
  559. cs: IO port probe 0xa00-0xaff: clean.
  560. cs: IO port probe 0x100-0x3af: clean.
  561. cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
  562. cs: IO port probe 0x820-0x8ff: clean.
  563. cs: IO port probe 0xc00-0xcf7: clean.
  564. cs: IO port probe 0x100-0x3af: clean.
  565. cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
  566. cs: IO port probe 0x820-0x8ff: clean.
  567. cs: IO port probe 0xc00-0xcf7: clean.
  568. cs: IO port probe 0xa00-0xaff: clean.
  569. cs: IO port probe 0x100-0x3af: clean.
  570. cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
  571. cs: IO port probe 0x820-0x8ff: clean.
  572. cs: IO port probe 0xc00-0xcf7: clean.
  573. cs: IO port probe 0xa00-0xaff: clean.
  574. cs: IO port probe 0xa00-0xaff: clean.
  575. usbcore: registered new interface driver hiddev
  576. input: Logitech Logitech USB Optical Mouse as /class/input/input9
  577. input,hidraw0: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-0000:00:07.2-1.3
  578. usbcore: registered new interface driver usbhid
  579. usbhid: v2.6:USB HID core driver
  580. EXT2-fs warning (device sda1): ext2_fill_super: mounting ext3 filesystem as ext2
  581. JFS: nTxBlock = 4026, nTxLock = 32211
  582. Adding 1100444k swap on /dev/sda4. Priority:-1 extents:1 across:1100444k
  583. warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
  584. conservative governor failed, too long transition latency of HW, fallback to performance governor
  585. thinkpad_acpi: requested hot key mask 0x0000ffff, forced to 0x00008000 (NVRAM poll mask is 0x00fb8000): no firmware mask support
  586. agpgart-intel 0000:00:00.0: AGP 1.0 bridge
  587. agpgart-intel 0000:00:00.0: putting AGP V2 device into 1x mode
  588. pci 0000:01:00.0: putting AGP V2 device into 1x mode
  589.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement