API tools faq
paste
Advertisement
Guest User

gonzalo

a guest
May 11th, 2009
280
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 34.18 KB | None | 0 0
raw download clone embed print report
  1. Copyright (c) 1992-2009 The FreeBSD Project.
  2. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
  3. The Regents of the University of California. All rights reserved.
  4. FreeBSD is a registered trademark of The FreeBSD Foundation.
  5. FreeBSD 7.2-RELEASE #0: Fri May 1 08:49:13 UTC 2009
  6. root@walker.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
  7. Preloaded elf kernel "/boot/kernel/kernel" at 0xc0e67000.
  8. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0e671e4.
  9. Calibrating clock(s) ... i8254 clock: 1193214 Hz
  10. CLK_USE_I8254_CALIBRATION not specified - using default frequency
  11. Timecounter "i8254" frequency 1193182 Hz quality 0
  12. Calibrating TSC clock ... TSC clock: 2128013712 Hz
  13. CPU: Intel(R) Celeron(R) CPU 560 @ 2.13GHz (2128.01-MHz 686-class CPU)
  14. Origin = "GenuineIntel" Id = 0x10661 Stepping = 1
  15. Features=0xafebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
  16. Features2=0xe31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM>
  17. AMD Features=0x20100000<NX,LM>
  18. AMD Features2=0x1<LAHF>
  19.  
  20. Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries
  21. 2nd-level cache: 1 MB, 4-way set associative, 64-byte line size
  22. 1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size
  23. 1st-level data cache: 32 KB, 8-way set associative, 64 byte line size
  24. L2 cache: 1024 kbytes, 4-way associative, 64 bytes/line
  25. real memory = 1063702528 (1014 MB)
  26. Physical memory chunk(s):
  27. 0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages)
  28. 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
  29. 0x0000000001025000 - 0x000000003e44cfff, 1027768320 bytes (250920 pages)
  30. avail memory = 1027198976 (979 MB)
  31. Table 'FACP' at 0x3f66f09c
  32. Table 'HPET' at 0x3f66f300
  33. Table 'APIC' at 0x3f66f400
  34. MADT: Found table at 0x3f66f400
  35. APIC: Using the MADT enumerator.
  36. MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
  37. SMP: Added CPU 0 (AP)
  38. MADT: Found CPU APIC ID 1 ACPI ID 1: disabled
  39. ACPI APIC Table: <DELL M09 >
  40. bios32: Found BIOS32 Service Directory header at 0xc00ffa00
  41. bios32: Entry = 0xffa10 (c00ffa10) Rev = 0 Len = 1
  42. pcibios: PCI BIOS entry at 0xf0000+0xb1d6
  43. pnpbios: Found PnP BIOS data at 0xc00fe2d0
  44. pnpbios: Entry = f0000:e2f4 Rev = 1.0
  45. pnpbios: Event flag at 4b4
  46. Other BIOS signatures found:
  47. APIC: CPU 0 has ACPI ID 0
  48. ULE: setup cpu group 0
  49. ULE: setup cpu 0
  50. ULE: adding cpu 0 to group 0: cpus 1 mask 0x1
  51. ACPI: RSDP @ 0x0xfc080/0x0024 (v 2 DELL )
  52. ACPI: XSDT @ 0x0x3f66f200/0x005C (v 1 DELL M09 0x27D9010F ASL 0x00000061)
  53. ACPI: FACP @ 0x0x3f66f09c/0x00F4 (v 4 DELL M09 0x27D9010F ASL 0x00000061)
  54. ACPI: DSDT @ 0x0x3f66f800/0x567B (v 2 INT430 SYSFexxx 0x00001001 INTL 0x20050624)
  55. ACPI: FACS @ 0x0x3f67e000/0x0040
  56. ACPI: HPET @ 0x0x3f66f300/0x0038 (v 1 DELL M09 0x00000001 ASL 0x00000061)
  57. ACPI: APIC @ 0x0x3f66f400/0x0068 (v 1 DELL M09 0x27D9010F ASL 0x00000047)
  58. ACPI: MCFG @ 0x0x3f66f3c0/0x003E (v 16 DELL M09 0x27D9010F ASL 0x00000061)
  59. ACPI: SLIC @ 0x0x3f66f49c/0x0176 (v 1 DELL M09 0x27D9010F ASL 0x00000061)
  60. ACPI: SSDT @ 0x0x3f66e253/0x05E5 (v 1 PmRef Cpu0Cst 0x00003001 INTL 0x20050624)
  61. ACPI: SSDT @ 0x0x3f66dd87/0x04CC (v 1 PmRef CpuPm 0x00003000 INTL 0x20050624)
  62. MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000
  63. ioapic0: Changing APIC ID to 1
  64. ioapic0: Routing external 8259A's -> intpin 0
  65. MADT: Interrupt override: source 0, irq 2
  66. ioapic0: Routing IRQ 0 -> intpin 2
  67. MADT: Interrupt override: source 9, irq 9
  68. ioapic0: intpin 9 trigger: level
  69. lapic0: Routing NMI -> LINT1
  70. lapic0: LINT1 trigger: edge
  71. lapic0: LINT1 polarity: high
  72. MADT: Ignoring local NMI routed to ACPI CPU 1
  73. ioapic0 <Version 2.0> irqs 0-23 on motherboard
  74. cpu0 BSP:
  75. ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  76. lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  77. timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
  78. wlan_amrr: <AMRR Transmit Rate Control Algorithm>
  79. wlan: <802.11 Link Layer>
  80. null: <null device, zero device>
  81. random: <entropy source, Software, Yarrow>
  82. nfslock: pseudo-device
  83. io: <I/O>
  84. kbd: new array size 4
  85. kbd1 at kbdmux0
  86. mem: <memory>
  87. Pentium Pro MTRR support enabled
  88. hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (May 1 2009 08:47:24)
  89. npx0: INT 16 interface
  90. acpi0: <DELL M09 > on motherboard
  91. ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
  92. acpi0: [MPSAFE]
  93. acpi0: [ITHREAD]
  94. pci_open(1): mode 1 addr port (0x0cf8) is 0x800000a0
  95. pci_open(1a): mode1res=0x80000000 (0x80000000)
  96. pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=2a008086)
  97. pcibios: BIOS version 2.10
  98. acpi_bus_number: root bus has no _BBN, assuming 0
  99. AcpiOsDerivePciId: \\_SB_.PCI0.VID_.IGDP -> bus 0 dev 2 func 0
  100. acpi_bus_number: root bus has no _BBN, assuming 0
  101. AcpiOsDerivePciId: \\_SB_.PCI0.MCHP -> bus 0 dev 0 func 0
  102. ACPI: SSDT @ 0x0x3f67e080/0x0043 (v 1 LMPWR DELLLOM 0x00001001 INTL 0x20050624)
  103. acpi0: wakeup code va 0xc3e6b000 pa 0x1000
  104. acpi_bus_number: root bus has no _BBN, assuming 0
  105. AcpiOsDerivePciId: \\_SB_.PCI0.ISAB.PIR1 -> bus 0 dev 31 func 0
  106. acpi_bus_number: root bus has no _BBN, assuming 0
  107. AcpiOsDerivePciId: \\_SB_.PCI0.ISAB.PIR2 -> bus 0 dev 31 func 0
  108. acpi_hpet0: vend: 0x8086 rev: 0x1 num: 2 hz: 14318180 opts: legacy_route 64-bit
  109. Timecounter "HPET" frequency 14318180 Hz quality 900
  110. acpi0: reservation of 0, 9f000 (3) failed
  111. acpi0: reservation of 100000, 3f56d800 (3) failed
  112. ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
  113. Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
  114. acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
  115. pci_link0: Index IRQ Rtd Ref IRQs
  116. Initial Probe 0 11 N 0 9 10 11
  117. Validation 0 11 N 0 9 10 11
  118. After Disable 0 255 N 0 9 10 11
  119. pci_link1: Index IRQ Rtd Ref IRQs
  120. Initial Probe 0 10 N 0 5 7
  121. Validation 0 255 N 0 5 7
  122. After Disable 0 255 N 0 5 7
  123. pci_link2: Index IRQ Rtd Ref IRQs
  124. Initial Probe 0 4 N 0 9 10 11
  125. Validation 0 255 N 0 9 10 11
  126. After Disable 0 255 N 0 9 10 11
  127. pci_link3: Index IRQ Rtd Ref IRQs
  128. Initial Probe 0 5 N 0 5 7 9 10 11
  129. Validation 0 5 N 0 5 7 9 10 11
  130. After Disable 0 255 N 0 5 7 9 10 11
  131. pci_link4: Index IRQ Rtd Ref IRQs
  132. Initial Probe 0 10 N 0 3 4 5 6 7 9 10 11 12 14 15
  133. Validation 0 10 N 0 3 4 5 6 7 9 10 11 12 14 15
  134. After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
  135. pci_link5: Index IRQ Rtd Ref IRQs
  136. Initial Probe 0 9 N 0 3 4 5 6 7 9 10 11 12 14 15
  137. Validation 0 9 N 0 3 4 5 6 7 9 10 11 12 14 15
  138. After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
  139. pci_link6: Index IRQ Rtd Ref IRQs
  140. Initial Probe 0 7 N 0 3 4 5 6 7 9 10 11 12 14 15
  141. Validation 0 7 N 0 3 4 5 6 7 9 10 11 12 14 15
  142. After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
  143. pci_link7: Index IRQ Rtd Ref IRQs
  144. Initial Probe 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
  145. Validation 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
  146. After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
  147. pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
  148. pci0: <ACPI PCI bus> on pcib0
  149. pci0: domain=0, physical bus=0
  150. found-> vendor=0x8086, dev=0x2a00, revid=0x0c
  151. domain=0, bus=0, slot=0, func=0
  152. class=06-00-00, hdrtype=0x00, mfdev=0
  153. cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
  154. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  155. found-> vendor=0x8086, dev=0x2a02, revid=0x0c
  156. domain=0, bus=0, slot=2, func=0
  157. class=03-00-00, hdrtype=0x00, mfdev=1
  158. cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
  159. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  160. intpin=a, irq=11
  161. powerspec 3 supports D0 D3 current D0
  162. MSI supports 1 message
  163. map[10]: type Memory, range 64, base 0xf6e00000, size 20, enabled
  164. map[18]: type Prefetchable Memory, range 64, base 0xe0000000, size 28, enabled
  165. map[20]: type I/O Port, range 32, base 0xeff8, size 3, enabled
  166. pcib0: matched entry for 0.2.INTA
  167. pcib0: slot 2 INTA hardwired to IRQ 16
  168. found-> vendor=0x8086, dev=0x2a03, revid=0x0c
  169. domain=0, bus=0, slot=2, func=1
  170. class=03-80-00, hdrtype=0x00, mfdev=1
  171. cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
  172. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  173. powerspec 3 supports D0 D3 current D0
  174. map[10]: type Memory, range 64, base 0xf6f00000, size 20, enabled
  175. found-> vendor=0x8086, dev=0x2834, revid=0x02
  176. domain=0, bus=0, slot=26, func=0
  177. class=0c-03-00, hdrtype=0x00, mfdev=1
  178. cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
  179. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  180. intpin=a, irq=10
  181. map[20]: type I/O Port, range 32, base 0x6f20, size 5, enabled
  182. pcib0: matched entry for 0.26.INTA
  183. pcib0: slot 26 INTA hardwired to IRQ 20
  184. found-> vendor=0x8086, dev=0x2835, revid=0x02
  185. domain=0, bus=0, slot=26, func=1
  186. class=0c-03-00, hdrtype=0x00, mfdev=0
  187. cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
  188. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  189. intpin=b, irq=9
  190. map[20]: type I/O Port, range 32, base 0x6f00, size 5, enabled
  191. pcib0: matched entry for 0.26.INTB
  192. pcib0: slot 26 INTB hardwired to IRQ 21
  193. found-> vendor=0x8086, dev=0x283a, revid=0x02
  194. domain=0, bus=0, slot=26, func=7
  195. class=0c-03-20, hdrtype=0x00, mfdev=0
  196. cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
  197. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  198. intpin=c, irq=7
  199. powerspec 2 supports D0 D3 current D0
  200. map[10]: type Memory, range 32, base 0xfed1c400, size 10, enabled
  201. pcib0: matched entry for 0.26.INTC
  202. pcib0: slot 26 INTC hardwired to IRQ 22
  203. found-> vendor=0x8086, dev=0x284b, revid=0x02
  204. domain=0, bus=0, slot=27, func=0
  205. class=04-03-00, hdrtype=0x00, mfdev=0
  206. cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords)
  207. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  208. intpin=a, irq=9
  209. powerspec 2 supports D0 D3 current D0
  210. MSI supports 1 message, 64 bit
  211. map[10]: type Memory, range 64, base 0xf6dfc000, size 14, enabled
  212. pcib0: matched entry for 0.27.INTA
  213. pcib0: slot 27 INTA hardwired to IRQ 21
  214. found-> vendor=0x8086, dev=0x283f, revid=0x02
  215. domain=0, bus=0, slot=28, func=0
  216. class=06-04-00, hdrtype=0x01, mfdev=1
  217. cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
  218. lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
  219. intpin=a, irq=255
  220. powerspec 2 supports D0 D3 current D0
  221. MSI supports 1 message
  222. found-> vendor=0x8086, dev=0x2841, revid=0x02
  223. domain=0, bus=0, slot=28, func=1
  224. class=06-04-00, hdrtype=0x01, mfdev=1
  225. cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
  226. lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
  227. intpin=b, irq=255
  228. powerspec 2 supports D0 D3 current D0
  229. MSI supports 1 message
  230. found-> vendor=0x8086, dev=0x2845, revid=0x02
  231. domain=0, bus=0, slot=28, func=3
  232. class=06-04-00, hdrtype=0x01, mfdev=1
  233. cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
  234. lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
  235. intpin=d, irq=255
  236. powerspec 2 supports D0 D3 current D0
  237. MSI supports 1 message
  238. found-> vendor=0x8086, dev=0x2849, revid=0x02
  239. domain=0, bus=0, slot=28, func=5
  240. class=06-04-00, hdrtype=0x01, mfdev=1
  241. cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
  242. lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
  243. intpin=b, irq=255
  244. powerspec 2 supports D0 D3 current D0
  245. MSI supports 1 message
  246. found-> vendor=0x8086, dev=0x2830, revid=0x02
  247. domain=0, bus=0, slot=29, func=0
  248. class=0c-03-00, hdrtype=0x00, mfdev=1
  249. cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
  250. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  251. intpin=a, irq=10
  252. map[20]: type I/O Port, range 32, base 0x6f80, size 5, enabled
  253. pcib0: matched entry for 0.29.INTA
  254. pcib0: slot 29 INTA hardwired to IRQ 20
  255. found-> vendor=0x8086, dev=0x2831, revid=0x02
  256. domain=0, bus=0, slot=29, func=1
  257. class=0c-03-00, hdrtype=0x00, mfdev=0
  258. cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
  259. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  260. intpin=b, irq=9
  261. map[20]: type I/O Port, range 32, base 0x6f60, size 5, enabled
  262. pcib0: matched entry for 0.29.INTB
  263. pcib0: slot 29 INTB hardwired to IRQ 21
  264. found-> vendor=0x8086, dev=0x2832, revid=0x02
  265. domain=0, bus=0, slot=29, func=2
  266. class=0c-03-00, hdrtype=0x00, mfdev=0
  267. cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
  268. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  269. intpin=c, irq=7
  270. map[20]: type I/O Port, range 32, base 0x6f40, size 5, enabled
  271. pcib0: matched entry for 0.29.INTC
  272. pcib0: slot 29 INTC hardwired to IRQ 22
  273. found-> vendor=0x8086, dev=0x2836, revid=0x02
  274. domain=0, bus=0, slot=29, func=7
  275. class=0c-03-20, hdrtype=0x00, mfdev=0
  276. cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
  277. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  278. intpin=a, irq=10
  279. powerspec 2 supports D0 D3 current D0
  280. map[10]: type Memory, range 32, base 0xfed1c000, size 10, enabled
  281. pcib0: matched entry for 0.29.INTA
  282. pcib0: slot 29 INTA hardwired to IRQ 20
  283. found-> vendor=0x8086, dev=0x2448, revid=0xf2
  284. domain=0, bus=0, slot=30, func=0
  285. class=06-04-01, hdrtype=0x01, mfdev=0
  286. cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
  287. lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
  288. found-> vendor=0x8086, dev=0x2815, revid=0x02
  289. domain=0, bus=0, slot=31, func=0
  290. class=06-01-00, hdrtype=0x00, mfdev=1
  291. cmdreg=0x0107, statreg=0x0210, cachelnsz=0 (dwords)
  292. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  293. found-> vendor=0x8086, dev=0x2850, revid=0x02
  294. domain=0, bus=0, slot=31, func=1
  295. class=01-01-8a, hdrtype=0x00, mfdev=0
  296. cmdreg=0x0005, statreg=0x0288, cachelnsz=0 (dwords)
  297. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  298. intpin=a, irq=11
  299. map[20]: type I/O Port, range 32, base 0x6fa0, size 4, enabled
  300. pcib0: matched entry for 0.31.INTA
  301. pcib0: slot 31 INTA hardwired to IRQ 16
  302. found-> vendor=0x8086, dev=0x2829, revid=0x02
  303. domain=0, bus=0, slot=31, func=2
  304. class=01-06-01, hdrtype=0x00, mfdev=0
  305. cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
  306. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  307. intpin=b, irq=10
  308. powerspec 3 supports D0 D3 current D0
  309. MSI supports 4 messages
  310. map[10]: type I/O Port, range 32, base 0x6eb0, size 3, enabled
  311. map[14]: type I/O Port, range 32, base 0x6eb8, size 2, enabled
  312. map[18]: type I/O Port, range 32, base 0x6ec0, size 3, enabled
  313. map[1c]: type I/O Port, range 32, base 0x6ec8, size 2, enabled
  314. map[20]: type I/O Port, range 32, base 0x6ee0, size 5, enabled
  315. map[24]: type Memory, range 32, base 0xf6dfb800, size 11, enabled
  316. pcib0: matched entry for 0.31.INTB
  317. pcib0: slot 31 INTB hardwired to IRQ 17
  318. found-> vendor=0x8086, dev=0x283e, revid=0x02
  319. domain=0, bus=0, slot=31, func=3
  320. class=0c-05-00, hdrtype=0x00, mfdev=0
  321. cmdreg=0x0103, statreg=0x0280, cachelnsz=0 (dwords)
  322. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  323. intpin=b, irq=10
  324. map[10]: type Memory, range 32, base 0xf6dfb700, size 8, enabled
  325. map[20]: type I/O Port, range 32, base 0x10c0, size 5, enabled
  326. pcib0: matched entry for 0.31.INTB
  327. pcib0: slot 31 INTB hardwired to IRQ 17
  328. vgapci0: <VGA-compatible display> port 0xeff8-0xefff mem 0xf6e00000-0xf6efffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
  329. agp0: <Intel GM965 SVGA controller> on vgapci0
  330. vgapci0: Reserved 0x10000000 bytes for rid 0x18 type 3 at 0xe0000000
  331. vgapci0: Reserved 0x100000 bytes for rid 0x10 type 3 at 0xf6e00000
  332. agp0: detected 7676k stolen memory
  333. agp0: aperture size is 256M
  334. vgapci1: <VGA-compatible display> mem 0xf6f00000-0xf6ffffff at device 2.1 on pci0
  335. uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0x6f20-0x6f3f irq 20 at device 26.0 on pci0
  336. uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x6f20
  337. ioapic0: routing intpin 20 (PCI IRQ 20) to vector 49
  338. uhci0: [GIANT-LOCKED]
  339. uhci0: [ITHREAD]
  340. usb0: <Intel 82801H (ICH8) USB controller USB-D> on uhci0
  341. usb0: USB revision 1.0
  342. uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
  343. uhub0: 2 ports with 2 removable, self powered
  344. uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0x6f00-0x6f1f irq 21 at device 26.1 on pci0
  345. uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x6f00
  346. ioapic0: routing intpin 21 (PCI IRQ 21) to vector 50
  347. uhci1: [GIANT-LOCKED]
  348. uhci1: [ITHREAD]
  349. usb1: <Intel 82801H (ICH8) USB controller USB-E> on uhci1
  350. usb1: USB revision 1.0
  351. uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
  352. uhub1: 2 ports with 2 removable, self powered
  353. ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem 0xfed1c400-0xfed1c7ff irq 22 at device 26.7 on pci0
  354. ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfed1c400
  355. ioapic0: routing intpin 22 (PCI IRQ 22) to vector 51
  356. ehci0: [GIANT-LOCKED]
  357. ehci0: [ITHREAD]
  358. usb2: EHCI version 1.0
  359. usb2: companion controllers, 2 ports each: usb0 usb1
  360. usb2: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> on ehci0
  361. usb2: USB revision 2.0
  362. uhub2: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
  363. uhub2: 4 ports with 4 removable, self powered
  364. pci0: <multimedia, HDA> at device 27.0 (no driver attached)
  365. pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
  366. pcib1: domain 0
  367. pcib1: secondary bus 11
  368. pcib1: subordinate bus 11
  369. pcib1: I/O decode 0xf000-0xfff
  370. pcib1: no prefetched decode
  371. pci11: <ACPI PCI bus> on pcib1
  372. pci11: domain=0, physical bus=11
  373. pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0
  374. pcib2: domain 0
  375. pcib2: secondary bus 12
  376. pcib2: subordinate bus 12
  377. pcib2: I/O decode 0xf000-0xfff
  378. pcib2: memory decode 0xf6c00000-0xf6cfffff
  379. pcib2: no prefetched decode
  380. pci12: <ACPI PCI bus> on pcib2
  381. pci12: domain=0, physical bus=12
  382. found-> vendor=0x14e4, dev=0x4315, revid=0x01
  383. domain=0, bus=12, slot=0, func=0
  384. class=02-80-00, hdrtype=0x00, mfdev=0
  385. cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords)
  386. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  387. intpin=a, irq=10
  388. powerspec 3 supports D0 D1 D2 D3 current D0
  389. MSI supports 1 message, 64 bit
  390. map[10]: type Memory, range 64, base 0xf6cfc000, size 14, enabled
  391. pcib2: requested memory range 0xf6cfc000-0xf6cfffff: good
  392. pcib2: matched entry for 12.0.INTA
  393. pcib2: slot 0 INTA hardwired to IRQ 17
  394. pci12: <network> at device 0.0 (no driver attached)
  395. pcib3: <ACPI PCI-PCI bridge> at device 28.3 on pci0
  396. pcib3: domain 0
  397. pcib3: secondary bus 13
  398. pcib3: subordinate bus 14
  399. pcib3: I/O decode 0xd000-0xdfff
  400. pcib3: memory decode 0xf6a00000-0xf6bfffff
  401. pcib3: prefetched decode 0xf0000000-0xf01fffff
  402. pci13: <ACPI PCI bus> on pcib3
  403. pci13: domain=0, physical bus=13
  404. pcib4: <ACPI PCI-PCI bridge> at device 28.5 on pci0
  405. pcib4: domain 0
  406. pcib4: secondary bus 9
  407. pcib4: subordinate bus 9
  408. pcib4: I/O decode 0xf000-0xfff
  409. pcib4: memory decode 0xf6900000-0xf69fffff
  410. pcib4: no prefetched decode
  411. pci9: <ACPI PCI bus> on pcib4
  412. pci9: domain=0, physical bus=9
  413. found-> vendor=0x14e4, dev=0x1713, revid=0x02
  414. domain=0, bus=9, slot=0, func=0
  415. class=02-00-00, hdrtype=0x00, mfdev=0
  416. cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords)
  417. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  418. intpin=a, irq=10
  419. powerspec 3 supports D0 D3 current D0
  420. MSI supports 1 message, 64 bit
  421. map[10]: type Memory, range 64, base 0xf69f0000, size 16, enabled
  422. pcib4: requested memory range 0xf69f0000-0xf69fffff: good
  423. pcib4: matched entry for 9.0.INTA
  424. pcib4: slot 0 INTA hardwired to IRQ 17
  425. bge0: <Broadcom BCM5906 A2, ASIC rev. 0xc002> mem 0xf69f0000-0xf69fffff irq 17 at device 0.0 on pci9
  426. bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xf69f0000
  427. bge0: adjust device control 0x2000 -> 0x5000
  428. bge0: attempting to allocate 1 MSI vectors (1 supported)
  429. msi: routing MSI IRQ 256 to vector 52
  430. bge0: using IRQ 256 for MSI
  431. bge0: CHIP ID 0xc0020000; ASIC REV 0x0c; CHIP REV 0xc0; PCI-E
  432. miibus0: <MII bus> on bge0
  433. brgphy0: <BCM5906 10/100baseTX PHY> PHY 1 on miibus0
  434. brgphy0: OUI 0x000af7, model 0x0004, rev. 0
  435. brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
  436. bge0: bpf attached
  437. bge0: Ethernet address: 00:23:ae:04:ba:ca
  438. bge0: [MPSAFE]
  439. bge0: [ITHREAD]
  440. uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0x6f80-0x6f9f irq 20 at device 29.0 on pci0
  441. uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x6f80
  442. uhci2: [GIANT-LOCKED]
  443. uhci2: [ITHREAD]
  444. usb3: <Intel 82801H (ICH8) USB controller USB-A> on uhci2
  445. usb3: USB revision 1.0
  446. uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
  447. uhub3: 2 ports with 2 removable, self powered
  448. uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0x6f60-0x6f7f irq 21 at device 29.1 on pci0
  449. uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x6f60
  450. uhci3: [GIANT-LOCKED]
  451. uhci3: [ITHREAD]
  452. usb4: <Intel 82801H (ICH8) USB controller USB-B> on uhci3
  453. usb4: USB revision 1.0
  454. uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
  455. uhub4: 2 ports with 2 removable, self powered
  456. uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0x6f40-0x6f5f irq 22 at device 29.2 on pci0
  457. uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0x6f40
  458. uhci4: [GIANT-LOCKED]
  459. uhci4: [ITHREAD]
  460. usb5: <Intel 82801H (ICH8) USB controller USB-C> on uhci4
  461. usb5: USB revision 1.0
  462. uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
  463. uhub5: 2 ports with 2 removable, self powered
  464. ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem 0xfed1c000-0xfed1c3ff irq 20 at device 29.7 on pci0
  465. ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfed1c000
  466. ehci1: [GIANT-LOCKED]
  467. ehci1: [ITHREAD]
  468. usb6: EHCI version 1.0
  469. usb6: companion controllers, 2 ports each: usb3 usb4 usb5
  470. usb6: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> on ehci1
  471. usb6: USB revision 2.0
  472. uhub6: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb6
  473. uhub6: 6 ports with 6 removable, self powered
  474. pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
  475. pcib5: domain 0
  476. pcib5: secondary bus 3
  477. pcib5: subordinate bus 3
  478. pcib5: I/O decode 0xf000-0xfff
  479. pcib5: memory decode 0xf6800000-0xf68fffff
  480. pcib5: no prefetched decode
  481. pcib5: Subtractively decoded bridge.
  482. pci3: <ACPI PCI bus> on pcib5
  483. pci3: domain=0, physical bus=3
  484. found-> vendor=0x1180, dev=0x0832, revid=0x05
  485. domain=0, bus=3, slot=1, func=0
  486. class=0c-00-10, hdrtype=0x00, mfdev=1
  487. cmdreg=0x0106, statreg=0x0210, cachelnsz=16 (dwords)
  488. lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
  489. intpin=a, irq=5
  490. powerspec 2 supports D0 D1 D2 D3 current D0
  491. map[10]: type Memory, range 32, base 0xf68ff800, size 11, enabled
  492. pcib5: requested memory range 0xf68ff800-0xf68fffff: good
  493. pcib5: matched entry for 3.1.INTA
  494. pcib5: slot 1 INTA hardwired to IRQ 19
  495. found-> vendor=0x1180, dev=0x0822, revid=0x22
  496. domain=0, bus=3, slot=1, func=1
  497. class=08-05-01, hdrtype=0x00, mfdev=1
  498. cmdreg=0x0106, statreg=0x0210, cachelnsz=16 (dwords)
  499. lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  500. intpin=b, irq=4
  501. powerspec 2 supports D0 D1 D2 D3 current D0
  502. map[10]: type Memory, range 32, base 0xf68ff400, size 8, enabled
  503. pcib5: requested memory range 0xf68ff400-0xf68ff4ff: good
  504. pcib5: matched entry for 3.1.INTB
  505. pcib5: slot 1 INTB hardwired to IRQ 18
  506. found-> vendor=0x1180, dev=0x0843, revid=0x12
  507. domain=0, bus=3, slot=1, func=2
  508. class=08-80-00, hdrtype=0x00, mfdev=1
  509. cmdreg=0x0106, statreg=0x0210, cachelnsz=16 (dwords)
  510. lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  511. intpin=b, irq=4
  512. powerspec 2 supports D0 D1 D2 D3 current D0
  513. map[10]: type Memory, range 32, base 0xf68ff500, size 8, enabled
  514. pcib5: requested memory range 0xf68ff500-0xf68ff5ff: good
  515. pcib5: matched entry for 3.1.INTB
  516. pcib5: slot 1 INTB hardwired to IRQ 18
  517. found-> vendor=0x1180, dev=0x0592, revid=0x12
  518. domain=0, bus=3, slot=1, func=3
  519. class=08-80-00, hdrtype=0x00, mfdev=1
  520. cmdreg=0x0106, statreg=0x0210, cachelnsz=16 (dwords)
  521. lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  522. intpin=b, irq=4
  523. powerspec 2 supports D0 D1 D2 D3 current D0
  524. map[10]: type Memory, range 32, base 0xf68ff600, size 8, enabled
  525. pcib5: requested memory range 0xf68ff600-0xf68ff6ff: good
  526. pcib5: matched entry for 3.1.INTB
  527. pcib5: slot 1 INTB hardwired to IRQ 18
  528. found-> vendor=0x1180, dev=0x0852, revid=0x12
  529. domain=0, bus=3, slot=1, func=4
  530. class=08-80-00, hdrtype=0x00, mfdev=1
  531. cmdreg=0x0106, statreg=0x0210, cachelnsz=16 (dwords)
  532. lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  533. intpin=b, irq=4
  534. powerspec 2 supports D0 D1 D2 D3 current D0
  535. map[10]: type Memory, range 32, base 0xf68ff700, size 8, enabled
  536. pcib5: requested memory range 0xf68ff700-0xf68ff7ff: good
  537. pcib5: matched entry for 3.1.INTB
  538. pcib5: slot 1 INTB hardwired to IRQ 18
  539. fwohci0: vendor=1180, dev=832
  540. fwohci0: vendor=1180, dev=832
  541. fwohci0: <1394 Open Host Controller Interface> mem 0xf68ff800-0xf68fffff irq 19 at device 1.0 on pci3
  542. fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xf68ff800
  543. ioapic0: routing intpin 19 (PCI IRQ 19) to vector 53
  544. fwohci0: [MPSAFE]
  545. fwohci0: [FILTER]
  546. fwohci0: OHCI version 1.10 (ROM=0)
  547. fwohci0: No. of Isochronous channels is 4.
  548. fwohci0: EUI64 44:4f:c0:00:30:49:95:c1
  549. fwohci0: Phy 1394a available S400, 1 ports.
  550. fwohci0: Link S400, max_rec 2048 bytes.
  551. firewire0: <IEEE1394(FireWire) bus> on fwohci0
  552. fwe0: <Ethernet over FireWire> on firewire0
  553. if_fwe0: Fake Ethernet address: 46:4f:c0:49:95:c1
  554. fwe0: bpf attached
  555. fwe0: Ethernet address: 46:4f:c0:49:95:c1
  556. fwip0: <IP over FireWire> on firewire0
  557. fwip0: bpf attached
  558. fwip0: Firewire address: 44:4f:c0:00:30:49:95:c1 @ 0xfffe00000000, S400, maxrec 2048
  559. sbp0: <SBP-2/SCSI over FireWire> on firewire0
  560. dcons_crom0: <dcons configuration ROM> on firewire0
  561. dcons_crom0: bus_addr 0x3e424000
  562. fwohci0: Initiate bus reset
  563. fwohci0: BUS reset
  564. fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
  565. pci3: <base peripheral, SD host controller> at device 1.1 (no driver attached)
  566. pci3: <base peripheral> at device 1.2 (no driver attached)
  567. pci3: <base peripheral> at device 1.3 (no driver attached)
  568. pci3: <base peripheral> at device 1.4 (no driver attached)
  569. isab0: <PCI-ISA bridge> at device 31.0 on pci0
  570. isa0: <ISA bus> on isab0
  571. atapci0: <Intel ICH8M UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x6fa0-0x6faf irq 16 at device 31.1 on pci0
  572. atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x6fa0
  573. ata0: <ATA channel 0> on atapci0
  574. atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
  575. atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
  576. ata0: reset tp1 mask=03 ostat0=50 ostat1=00
  577. ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
  578. ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
  579. ata0: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
  580. ioapic0: routing intpin 14 (ISA IRQ 14) to vector 54
  581. ata0: [MPSAFE]
  582. ata0: [ITHREAD]
  583. atapci1: <Intel (ID=28298086) AHCI controller> port 0x6eb0-0x6eb7,0x6eb8-0x6ebb,0x6ec0-0x6ec7,0x6ec8-0x6ecb,0x6ee0-0x6eff mem 0xf6dfb800-0xf6dfbfff irq 17 at device 31.2 on pci0
  584. atapci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x6ee0
  585. atapci1: Reserved 0x800 bytes for rid 0x24 type 3 at 0xf6dfb800
  586. ioapic0: routing intpin 17 (PCI IRQ 17) to vector 55
  587. atapci1: [MPSAFE]
  588. atapci1: [ITHREAD]
  589. atapci1: AHCI Version 01.10 controller with 3 ports detected
  590. ata2: <ATA channel 0> on atapci1
  591. ata2: SATA connect time=0ms
  592. ata2: SIGNATURE: 00000101
  593. ata2: ahci_reset devices=0x1<ATA_MASTER>
  594. ata2: [MPSAFE]
  595. ata2: [ITHREAD]
  596. ata3: <ATA channel 1> on atapci1
  597. ata3: port not implemented
  598. ata3: [MPSAFE]
  599. ata3: [ITHREAD]
  600. ata4: <ATA channel 2> on atapci1
  601. ata4: SATA connect status=00000004
  602. ata4: ahci_reset devices=0x0
  603. ata4: [MPSAFE]
  604. ata4: [ITHREAD]
  605. pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
  606. acpi_lid0: <Control Method Lid Switch> on acpi0
  607. acpi_button0: <Power Button> on acpi0
  608. acpi_button1: <Sleep Button> on acpi0
  609. acpi_acad0: <AC Adapter> on acpi0
  610. battery0: <ACPI Control Method Battery> on acpi0
  611. acpi_tz0: <Thermal Zone> on acpi0
  612. psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
  613. atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64,0x62,0x66 irq 1 on acpi0
  614. atkbd0: <AT Keyboard> irq 1 on atkbdc0
  615. atkbd: the current kbd controller command byte 0065
  616. atkbd: keyboard ID 0x41ab (2)
  617. kbd0 at atkbd0
  618. kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
  619. ioapic0: routing intpin 1 (ISA IRQ 1) to vector 56
  620. atkbd0: [GIANT-LOCKED]
  621. atkbd0: [ITHREAD]
  622. psm0: current command byte:0065
  623. psm0: <PS/2 Mouse> irq 12 on atkbdc0
  624. ioapic0: routing intpin 12 (ISA IRQ 12) to vector 57
  625. psm0: [GIANT-LOCKED]
  626. psm0: [ITHREAD]
  627. psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
  628. psm0: config:00000000, flags:00000008, packet size:3
  629. psm0: syncmask:c0, syncbits:00
  630. cpu0: <ACPI CPU> on acpi0
  631. p4tcc0: <CPU Frequency Thermal Control> on cpu0
  632. unknown: status reg test failed ff
  633. unknown: status reg test failed ff
  634. unknown: status reg test failed ff
  635. unknown: status reg test failed ff
  636. unknown: status reg test failed ff
  637. unknown: status reg test failed ff
  638. ahc_isa_probe 0: ioport 0xc00 alloc failed
  639. ex_isa_identify()
  640. ata: ata0 already exists; skipping it
  641. atkbdc: atkbdc0 already exists; skipping it
  642. pnp_identify: Trying Read_Port at 203
  643. pnp_identify: Trying Read_Port at 243
  644. pnp_identify: Trying Read_Port at 283
  645. pnp_identify: Trying Read_Port at 2c3
  646. pnp_identify: Trying Read_Port at 303
  647. pnp_identify: Trying Read_Port at 343
  648. pnp_identify: Trying Read_Port at 383
  649. pnp_identify: Trying Read_Port at 3c3
  650. PNP Identify complete
  651. sc: sc0 already exists; skipping it
  652. vga: vga0 already exists; skipping it
  653. isa_probe_children: disabling PnP devices
  654. isa_probe_children: probing non-PnP devices
  655. pmtimer0 on isa0
  656. orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xcf000-0xcffff pnpid ORM0000 on isa0
  657. adv0: not probed (disabled)
  658. aha0: not probed (disabled)
  659. aic0: not probed (disabled)
  660. ata1 failed to probe at port 0x170 irq 15 on isa0
  661. bt0: not probed (disabled)
  662. cs0: not probed (disabled)
  663. ed0: not probed (disabled)
  664. fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
  665. fe0: not probed (disabled)
  666. ie0: not probed (disabled)
  667. le0: not probed (disabled)
  668. ppc0: parallel port not found.
  669. ppc0: <Parallel port> failed to probe at irq 7 on isa0
  670. sc0: <System console> at flags 0x100 on isa0
  671. sc0: VGA <16 virtual consoles, flags=0x300>
  672. sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
  673. sio0: configured irq 4 not in bitmap of probed irqs 0
  674. sio0: port may not be enabled
  675. sio0: irq maps: 0x4eb1 0x4eb1 0x4eb1 0x4eb1
  676. sio0: probe failed test(s): 0 1 2 4 6 7 9
  677. sio0: configured irq 4 not in bitmap of probed irqs 0
  678. sio0: port may not be enabled
  679. sio0: irq maps: 0x4eb1 0x4eb1 0x4eb1 0x4eb1
  680. sio0: probe failed test(s): 0 1 2 4 6 7 9
  681. sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
  682. sio0: type 8250 or not responding
  683. ioapic0: routing intpin 4 (ISA IRQ 4) to vector 58
  684. sio0: [FILTER]
  685. sio1: configured irq 3 not in bitmap of probed irqs 0
  686. sio1: port may not be enabled
  687. sio1: irq maps: 0x4eb1 0x4eb1 0x4eb1 0x4eb1
  688. sio1: probe failed test(s): 0 1 2 4 6 7 9
  689. sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
  690. sio2: not probed (disabled)
  691. sio3: not probed (disabled)
  692. sn0: not probed (disabled)
  693. vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
  694. vt0: not probed (disabled)
  695. isa_probe_children: probing PnP devices
  696. Device configuration finished.
  697. procfs registered
  698. lapic: Divisor 2, Frequency 66500449 hz
  699. Timecounter "TSC" frequency 2128013712 Hz quality 800
  700. Timecounters tick every 1.000 msec
  701. lo0: bpf attached
  702. hptrr: no controller detected.
  703. firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
  704. firewire0: bus manager 0 (me)
  705. ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=80 wire
  706. acpi_acad0: acline initialization start
  707. acd0: setting PIO4 on ICH8M chip
  708. acpi_acad0: On Lineacd0: setting UDMA33 on ICH8M chip
  709.  
  710. acpi_acad0: acline initialization done, tried 1 times
  711. battery0: battery initialization start
  712. acd0: <MATSHITA DVD+/-RW UJ-875S/D200> DVDR drive at ata0 as master
  713. acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, UDMA33
  714. acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
  715. acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
  716. acd0: Audio: play, 256 volume levels
  717. acd0: Mechanism: ejectable caddy, unlocked
  718. acd0: Medium: no/blank disc
  719. ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
  720. ad4: 238475MB <Seagate ST9250827AS 3.ADB> at ata2-master SATA300
  721. ad4: 488397168 sectors [484521C/16H/63S] 16 sectors/interrupt 1 depth queue
  722. GEOM: new disk ad4
  723. ad4: Intel check1 failed
  724. ad4: Adaptec check1 failed
  725. ad4: LSI (v3) check1 failed
  726. ad4: LSI (v2) check1 failed
  727. ad4: FreeBSD check1 failed
  728. GEOM_LABEL: Label for provider ad4s1 is msdosfs/DellUtility.
  729. GEOM_LABEL: Label for provider ad4s2 is ntfs/OS.
  730. GEOM_LABEL: Label for provider ad4s4a is ufsid/4a0448b836027261.
  731. GEOM_LABEL: Label for provider ad4s4d is ufsid/4a0448bb6631b324.
  732. GEOM_LABEL: Label for provider ad4s4e is ufsid/4a0448b80bec5d96.
  733. GEOM_LABEL: Label for provider ad4s4f is ufsid/4a0448b836ae7b99.
  734. (probe0:sbp0:0:0:0): error 22
  735. (probe0:sbp0:0:0:0): Unretryable Error
  736. (probe1:sbp0:0:1:0): error 22
  737. (probe1:sbp0:0:1:0): Unretryable Error
  738. (probe2:sbp0:0:2:0): error 22
  739. (probe2:sbp0:0:2:0): Unretryable Error
  740. (probe3:sbp0:0:3:0): error 22
  741. (probe3:sbp0:0:3:0): Unretryable Error
  742. (probe4:sbp0:0:4:0): error 22
  743. (probe4:sbp0:0:4:0): Unretryable Error
  744. (probe5:sbp0:0:5:0): error 22
  745. (probe5:sbp0:0:5:0): Unretryable Error
  746. (probe6:sbp0:0:6:0): error 22
  747. (probe6:sbp0:0:6:0): Unretryable Error
  748. ATA PseudoRAID loaded
  749. Trying to mount root from ufs:/dev/ad4s4a
  750. start_init: trying /sbin/init
  751. GEOM_LABEL: Label ufsid/4a0448b836027261 removed.
  752. GEOM_LABEL: Label for provider ad4s4a is ufsid/4a0448b836027261.
  753. GEOM_LABEL: Label ufsid/4a0448b80bec5d96 removed.
  754. GEOM_LABEL: Label for provider ad4s4e is ufsid/4a0448b80bec5d96.
  755. GEOM_LABEL: Label ufsid/4a0448b836ae7b99 removed.
  756. GEOM_LABEL: Label for provider ad4s4f is ufsid/4a0448b836ae7b99.
  757. GEOM_LABEL: Label ufsid/4a0448bb6631b324 removed.
  758. GEOM_LABEL: Label for provider ad4s4d is ufsid/4a0448bb6631b324.
  759. GEOM_LABEL: Label ufsid/4a0448b836027261 removed.
  760. GEOM_LABEL: Label ufsid/4a0448b80bec5d96 removed.
  761. GEOM_LABEL: Label ufsid/4a0448b836ae7b99 removed.
  762. GEOM_LABEL: Label ufsid/4a0448bb6631b324 removed.
  763. Linux ELF exec handler installed
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!