API tools faq
paste
Advertisement
Guest User

Aranel

a guest
Aug 1st, 2007
504
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 65.53 KB | None | 0 0
raw download clone embed print report
  1. [ 17.903696] Built 1 zonelists. Total pages: 130033
  2. [ 17.903702] Kernel command line: root=UUID=c7a1c5ff-7d7c-4c2e-8191-f3cbb5fb7fe4 ro vga=792 quiet splash locale=tr_TR
  3. [ 17.903902] Local APIC disabled by BIOS -- you can enable it with "lapic"
  4. [ 17.903912] mapped APIC to ffffd000 (0140a000)
  5. [ 17.903916] Enabling fast FPU save and restore... done.
  6. [ 17.903921] Enabling unmasked SIMD FPU exception support... done.
  7. [ 17.903937] Initializing CPU#0
  8. [ 17.904045] PID hash table entries: 2048 (order: 11, 8192 bytes)
  9. [ 17.904188] Console: colour dummy device 80x25
  10. [ 17.904643] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  11. [ 17.905056] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  12. [ 17.916940] Memory: 508732k/524224k available (1992k kernel code, 14976k reserved, 900k data, 328k init, 0k highmem)
  13. [ 17.916952] virtual kernel memory layout:
  14. [ 17.916953] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
  15. [ 17.916954] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
  16. [ 17.916955] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
  17. [ 17.916956] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
  18. [ 17.916957] .init : 0xc03d9000 - 0xc042b000 ( 328 kB)
  19. [ 17.916959] .data : 0xc02f2374 - 0xc03d36d4 ( 900 kB)
  20. [ 17.916960] .text : 0xc0100000 - 0xc02f2374 (1992 kB)
  21. [ 17.916963] Checking if this processor honours the WP bit even in supervisor mode... Ok.
  22. [ 17.996016] Calibrating delay using timer specific routine.. 4843.41 BogoMIPS (lpj=9686837)
  23. [ 17.996068] Security Framework v1.0.0 initialized
  24. [ 17.996076] SELinux: Disabled at boot.
  25. [ 17.996097] Mount-cache hash table entries: 512
  26. [ 17.996277] CPU: After generic identify, caps: bfebf9ff 00000000 00000000 00000000 00000000 00000000 00000000
  27. [ 17.996291] CPU: Trace cache: 12K uops, L1 D cache: 8K
  28. [ 17.996294] CPU: L2 cache: 512K
  29. [ 17.996297] CPU: Hyper-Threading is disabled
  30. [ 17.996299] CPU: After all inits, caps: bfebf9ff 00000000 00000000 00003080 00000000 00000000 00000000
  31. [ 17.996314] Compat vDSO mapped to ffffe000.
  32. [ 17.996318] Remapping vsyscall page to ffffe000
  33. [ 17.996333] Checking 'hlt' instruction... OK.
  34. [ 18.012119] SMP alternatives: switching to UP code
  35. [ 18.012358] Freeing SMP alternatives: 11k freed
  36. [ 18.012600] Early unpacking initramfs... done
  37. [ 18.328087] ACPI: Core revision 20060707
  38. [ 18.335520] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
  39. [ 18.337118] ACPI: setting ELCR to 0200 (from 1c00)
  40. [ 18.339949] CPU0: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07
  41. [ 18.339957] SMP motherboard not detected.
  42. [ 18.339960] Local APIC not detected. Using dummy APIC emulation.
  43. [ 18.340006] Brought up 1 CPUs
  44. [ 18.340306] Booting paravirtualized kernel on bare hardware
  45. [ 18.340396] Time: 17:01:16 Date: 07/01/107
  46. [ 18.340432] NET: Registered protocol family 16
  47. [ 18.340553] EISA bus registered
  48. [ 18.340559] ACPI: bus type pci registered
  49. [ 18.379379] PCI: PCI BIOS revision 2.10 entry at 0xfb410, last bus=1
  50. [ 18.379382] PCI: Using configuration type 1
  51. [ 18.379384] Setting up standard PCI resources
  52. [ 18.392214] ACPI: Interpreter enabled
  53. [ 18.392219] ACPI: Using PIC for interrupt routing
  54. [ 18.392739] ACPI: PCI Root Bridge [PCI0] (0000:00)
  55. [ 18.392745] PCI: Probing PCI hardware (bus 00)
  56. [ 18.392793] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
  57. [ 18.393102] Enabling SiS 96x SMBus.
  58. [ 18.393613] Boot video device is 0000:01:00.0
  59. [ 18.393677] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  60. [ 18.411364] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
  61. [ 18.411627] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
  62. [ 18.411907] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
  63. [ 18.412168] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
  64. [ 18.412426] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
  65. [ 18.412685] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
  66. [ 18.412950] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
  67. [ 18.413208] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
  68. [ 18.416247] Linux Plug and Play Support v0.97 (c) Adam Belay
  69. [ 18.416261] pnp: PnP ACPI init
  70. [ 18.420545] pnp: PnP ACPI: found 14 devices
  71. [ 18.420552] PnPBIOS: Disabled by ACPI PNP
  72. [ 18.420620] PCI: Using ACPI for IRQ routing
  73. [ 18.420624] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
  74. [ 18.427244] NET: Registered protocol family 8
  75. [ 18.427246] NET: Registered protocol family 20
  76. [ 18.428029] PCI: Bridge: 0000:00:01.0
  77. [ 18.428031] IO window: disabled.
  78. [ 18.428038] MEM window: ec000000-edffffff
  79. [ 18.428044] PREFETCH window: e0000000-e7ffffff
  80. [ 18.428089] NET: Registered protocol family 2
  81. [ 18.467942] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  82. [ 18.468048] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  83. [ 18.468170] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  84. [ 18.468230] TCP: Hash tables configured (established 16384 bind 8192)
  85. [ 18.468233] TCP reno registered
  86. [ 18.479988] checking if image is initramfs... it is
  87. [ 19.103307] Freeing initrd memory: 6777k freed
  88. [ 19.103855] audit: initializing netlink socket (disabled)
  89. [ 19.103876] audit(1185987677.388:1): initialized
  90. [ 19.104049] VFS: Disk quotas dquot_6.5.1
  91. [ 19.104074] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  92. [ 19.104140] io scheduler noop registered
  93. [ 19.104144] io scheduler anticipatory registered
  94. [ 19.104146] io scheduler deadline registered
  95. [ 19.104155] io scheduler cfq registered (default)
  96. [ 19.104421] isapnp: Scanning for PnP cards...
  97. [ 19.458257] isapnp: No Plug & Play device found
  98. [ 19.491228] Real Time Clock Driver v1.12ac
  99. [ 19.491290] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
  100. [ 19.491430] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  101. [ 19.491734] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
  102. [ 19.492522] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  103. [ 19.492896] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
  104. [ 19.493256] mice: PS/2 mouse device common for all mice
  105. [ 19.493945] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
  106. [ 19.494271] input: Macintosh mouse button emulation as /class/input/input0
  107. [ 19.494313] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
  108. [ 19.494318] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
  109. [ 19.494597] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
  110. [ 19.494600] PNP: PS/2 controller doesn't have AUX irq; using default 12
  111. [ 19.496909] serio: i8042 KBD port at 0x60,0x64 irq 1
  112. [ 19.497061] EISA: Probing bus 0 at eisa.0
  113. [ 19.497075] Cannot allocate resource for EISA slot 1
  114. [ 19.497102] EISA: Detected 0 cards.
  115. [ 19.527342] TCP cubic registered
  116. [ 19.527356] NET: Registered protocol family 1
  117. [ 19.527386] Using IPI No-Shortcut mode
  118. [ 19.527451] Time: tsc clocksource has been installed.
  119. [ 19.527572] ACPI: (supports S0 S1 S4 S5)
  120. [ 19.527630] Magic number: 3:849:35
  121. [ 19.528288] Freeing unused kernel memory: 328k freed
  122. [ 19.629560] vesafb: framebuffer at 0xe0000000, mapped to 0xe0880000, using 6144k, total 131072k
  123. [ 19.629566] vesafb: mode is 1024x768x32, linelength=4096, pages=1
  124. [ 19.629568] vesafb: protected mode interface info at c000:e340
  125. [ 19.629571] vesafb: pmi: set display start = c00ce376, set palette = c00ce3e0
  126. [ 19.629574] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
  127. [ 19.629589] vesafb: scrolling: redraw
  128. [ 19.629592] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
  129. [ 19.683219] Console: switching to colour frame buffer device 128x48
  130. [ 19.736667] fb0: VESA VGA frame buffer device
  131. [ 20.995845] Capability LSM initialized
  132. [ 21.033105] ACPI: Fan [FAN] (on)
  133. [ 21.039389] ACPI: Thermal Zone [THRM] (52 C)
  134. [ 21.663163] usbcore: registered new interface driver usbfs
  135. [ 21.663199] usbcore: registered new interface driver hub
  136. [ 21.663226] usbcore: registered new device driver usb
  137. [ 21.664168] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
  138. [ 21.664446] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 12
  139. [ 21.664450] PCI: setting IRQ 12 as level-triggered
  140. [ 21.664453] ACPI: PCI Interrupt 0000:00:02.2[D] -> Link [LNKD] -> GSI 12 (level, low) -> IRQ 12
  141. [ 21.664469] ohci_hcd 0000:00:02.2: OHCI Host Controller
  142. [ 21.664664] ohci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
  143. [ 21.664684] ohci_hcd 0000:00:02.2: irq 12, io mem 0xef011000
  144. [ 21.725181] usb usb1: configuration #1 chosen from 1 choice
  145. [ 21.725217] hub 1-0:1.0: USB hub found
  146. [ 21.725230] hub 1-0:1.0: 3 ports detected
  147. [ 21.778354] Floppy drive(s): fd0 is 1.44M
  148. [ 21.827827] ACPI: PCI Interrupt 0000:00:02.3[D] -> Link [LNKD] -> GSI 12 (level, low) -> IRQ 12
  149. [ 21.827852] ohci_hcd 0000:00:02.3: OHCI Host Controller
  150. [ 21.827879] ohci_hcd 0000:00:02.3: new USB bus registered, assigned bus number 2
  151. [ 21.827897] ohci_hcd 0000:00:02.3: irq 12, io mem 0xef012000
  152. [ 21.839711] FDC 0 is a post-1991 82077
  153. [ 21.884721] usb usb2: configuration #1 chosen from 1 choice
  154. [ 21.884757] hub 2-0:1.0: USB hub found
  155. [ 21.884771] hub 2-0:1.0: 3 ports detected
  156. [ 21.987417] SIS5513: IDE controller at PCI slot 0000:00:02.5
  157. [ 21.987441] SIS5513: chipset revision 208
  158. [ 21.987444] SIS5513: not 100% native mode: will probe irqs later
  159. [ 21.987469] SIS5513: SiS 961B MuTIOL IDE UDMA133 controller
  160. [ 21.987487] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
  161. [ 21.987504] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio
  162. [ 21.987518] Probing IDE interface ide0...
  163. [ 22.130500] usb 1-1: new full speed USB device using ohci_hcd and address 2
  164. [ 22.274582] hda: ST360021A, ATA DISK drive
  165. [ 22.339792] usb 1-1: configuration #1 chosen from 1 choice
  166. [ 22.342770] hub 1-1:1.0: USB hub found
  167. [ 22.345713] hub 1-1:1.0: 4 ports detected
  168. [ 22.554480] hdb: ST3320620A, ATA DISK drive
  169. [ 22.610730] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
  170. [ 22.614198] Probing IDE interface ide1...
  171. [ 22.770264] usb 1-2: new full speed USB device using ohci_hcd and address 3
  172. [ 22.991415] usb 1-2: configuration #2 chosen from 2 choices
  173. [ 23.219174] usb 1-1.2: new low speed USB device using ohci_hcd and address 4
  174. [ 23.328218] usb 1-1.2: configuration #1 chosen from 1 choice
  175. [ 23.350248] hdc: TSSTcorpCD/DVDW SH-S162A, ATAPI CD/DVD-ROM drive
  176. [ 23.547979] usb 1-1.4: new full speed USB device using ohci_hcd and address 5
  177. [ 23.662028] usb 1-1.4: configuration #1 chosen from 1 choice
  178. [ 23.666450] usbcore: registered new interface driver hiddev
  179. [ 23.678087] input: HID 04d9:0499 as /class/input/input1
  180. [ 23.678116] input: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:02.2-1.2
  181. [ 23.678138] usbcore: registered new interface driver usbhid
  182. [ 23.678142] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
  183. [ 24.022000] ide1 at 0x170-0x177,0x376 on irq 15
  184. [ 24.030566] SCSI subsystem initialized
  185. [ 24.036874] libata version 2.20 loaded.
  186. [ 24.048931] hda: max request size: 128KiB
  187. [ 24.060539] hda: 117231408 sectors (60022 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(33)
  188. [ 24.060550] hda: cache flushes not supported
  189. [ 24.060611] hda: hda1 hda2 < hda5 >
  190. [ 24.087701] hdb: max request size: 512KiB
  191. [ 24.130211] hdb: 625142448 sectors (320072 MB) w/16384KiB Cache, CHS=38913/255/63, UDMA(33)
  192. [ 24.154574] hdb: cache flushes supported
  193. [ 24.154628] hdb: hdb1 hdb2 hdb3
  194. [ 24.224169] hdc: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
  195. [ 24.224183] Uniform CD-ROM driver Revision: 3.20
  196. [ 24.660837] Attempting manual resume
  197. [ 24.660843] swsusp: Resume From Partition 3:67
  198. [ 24.660845] PM: Checking swsusp image.
  199. [ 24.661142] PM: Resume from disk failed.
  200. [ 24.699250] kjournald starting. Commit interval 5 seconds
  201. [ 24.699265] EXT3-fs: mounted filesystem with ordered data mode.
  202. [ 34.937388] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  203. [ 35.070394] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
  204. [ 35.097875] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x1080
  205. [ 35.491262] Linux agpgart interface v0.102 (c) Dave Jones
  206. [ 35.516287] agpgart: Detected SiS 650 chipset
  207. [ 35.520345] agpgart: AGP aperture is 64M @ 0xe8000000
  208. [ 35.566535] input: PC Speaker as /class/input/input2
  209. [ 35.692393] parport: PnPBIOS parport detected.
  210. [ 35.692501] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
  211. [ 35.759640] nvidia: module license 'NVIDIA' taints kernel.
  212. [ 36.083853] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
  213. [ 36.083859] PCI: setting IRQ 11 as level-triggered
  214. [ 36.083863] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
  215. [ 36.084274] NVRM: loading NVIDIA UNIX x86 Kernel Module 1.0-9755 Mon Feb 26 23:21:15 PST 2007
  216. [ 36.091709] eth0: register 'cdc_ether' at usb-0000:00:02.2-2, CDC Ethernet Device, 00:11:f5:bf:08:59
  217. [ 36.091734] usbcore: registered new interface driver cdc_ether
  218. [ 36.163635] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7604
  219. [ 36.163655] usbcore: registered new interface driver usblp
  220. [ 36.163659] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
  221. [ 36.472097] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
  222. [ 36.472103] PCI: setting IRQ 10 as level-triggered
  223. [ 36.472107] ACPI: PCI Interrupt 0000:00:02.7[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
  224. [ 36.785116] intel8x0_measure_ac97_clock: measured 55047 usecs
  225. [ 36.785122] intel8x0: clocking to 48000
  226. [ 36.944104] fuse init (API version 7.8)
  227. [ 36.973907] lp0: using parport0 (interrupt-driven).
  228. [ 37.182362] Adding 208836k swap on /dev/disk/by-uuid/35abbf5a-6ebb-4bfa-ab28-0f53ad5d5814. Priority:-1 extents:1 across:208836k
  229. [ 37.467597] EXT3 FS on hdb1, internal journal
  230. [ 37.858324] NET: Registered protocol family 17
  231. [ 38.031890] NET: Registered protocol family 10
  232. [ 38.032008] lo: Disabled Privacy Extensions
  233. [ 45.506229] kjournald starting. Commit interval 5 seconds
  234. [ 45.506474] EXT3 FS on hda1, internal journal
  235. [ 45.506480] EXT3-fs: mounted filesystem with ordered data mode.
  236. [ 45.646206] kjournald starting. Commit interval 5 seconds
  237. [ 45.646462] EXT3 FS on hdb2, internal journal
  238. [ 45.646468] EXT3-fs: mounted filesystem with ordered data mode.
  239. [ 48.720686] eth0: no IPv6 routers present
  240. [ 51.206992] ibm_acpi: ec object not found
  241. [ 51.318169] input: Power Button (FF) as /class/input/input3
  242. [ 51.323773] ACPI: Power Button (FF) [PWRF]
  243. [ 51.366884] input: Power Button (CM) as /class/input/input4
  244. [ 51.372407] ACPI: Power Button (CM) [PWRB]
  245. [ 51.479928] No dock devices found.
  246. [ 51.503119] Using specific hotkey driver
  247. [ 51.642240] pcc_acpi: loading...
  248. [ 53.514369] ppdev: user-space parallel port driver
  249. [ 54.315400] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
  250. [ 54.315407] apm: overridden by ACPI.
  251. [ 54.803602] vboxdrv: Trying to deactivate NMI watchdog permanently...
  252. [ 54.803610] vboxdrv: Successfully done.
  253. [ 55.118813] Bluetooth: Core ver 2.11
  254. [ 55.118897] NET: Registered protocol family 31
  255. [ 55.118899] Bluetooth: HCI device and connection manager initialized
  256. [ 55.118904] Bluetooth: HCI socket layer initialized
  257. [ 55.140376] Bluetooth: L2CAP ver 2.8
  258. [ 55.140382] Bluetooth: L2CAP socket layer initialized
  259. [ 55.193616] Bluetooth: RFCOMM socket layer initialized
  260. [ 55.193634] Bluetooth: RFCOMM TTY layer initialized
  261. [ 55.193636] Bluetooth: RFCOMM ver 1.8
  262. [ 56.692992] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
  263. [ 56.693362] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
  264. [ 56.693576] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
  265. [ 65.305897] input: AT Translated Set 2 keyboard as /class/input/input5
  266. [ 70.932490] eth0: no IPv6 routers present
  267. [ 320.847333] usb 1-1: USB disconnect, address 2
  268. [ 320.847434] usb 1-1.2: USB disconnect, address 4
  269. [ 320.850335] usb 1-1.4: USB disconnect, address 5
  270. [ 320.850556] drivers/usb/class/usblp.c: usblp0: removed
  271. [ 321.383997] usb 1-2: USB disconnect, address 3
  272. [ 321.392240] eth0: unregister 'cdc_ether' usb-0000:00:02.2-2, CDC Ethernet Device
  273. [ 329.697245] usb 1-1: new full speed USB device using ohci_hcd and address 6
  274. [ 329.906272] usb 1-1: configuration #1 chosen from 1 choice
  275. [ 329.909216] hub 1-1:1.0: USB hub found
  276. [ 329.912146] hub 1-1:1.0: 4 ports detected
  277. [ 330.336806] usb 1-2: new full speed USB device using ohci_hcd and address 7
  278. [ 330.557865] usb 1-2: configuration #2 chosen from 2 choices
  279. [ 330.569859] eth0: register 'cdc_ether' at usb-0000:00:02.2-2, CDC Ethernet Device, 00:11:f5:bf:08:59
  280. [ 330.794624] usb 1-1.2: new low speed USB device using ohci_hcd and address 8
  281. [ 330.903693] usb 1-1.2: configuration #1 chosen from 1 choice
  282. [ 330.918693] input: HID 04d9:0499 as /class/input/input6
  283. [ 330.918764] input: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:02.2-1.2
  284. [ 331.134411] usb 1-1.4: new full speed USB device using ohci_hcd and address 9
  285. [ 331.248488] usb 1-1.4: configuration #1 chosen from 1 choice
  286. [ 331.257514] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 9 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7604
  287. [ 348.518094] eth0: no IPv6 routers present
  288. [ 859.816638] usb 1-1: USB disconnect, address 6
  289. [ 859.816645] usb 1-1.2: USB disconnect, address 8
  290. [ 859.817868] usb 1-1.4: USB disconnect, address 9
  291. [ 859.817928] drivers/usb/class/usblp.c: usblp0: removed
  292. [ 860.342420] usb 1-2: USB disconnect, address 7
  293. [ 860.349407] eth0: unregister 'cdc_ether' usb-0000:00:02.2-2, CDC Ethernet Device
  294. [ 862.744388] usb 1-2: new full speed USB device using ohci_hcd and address 10
  295. [ 862.966186] usb 1-2: configuration #2 chosen from 2 choices
  296. [ 862.978292] eth0: register 'cdc_ether' at usb-0000:00:02.2-2, CDC Ethernet Device, 00:11:f5:bf:08:59
  297. [ 863.284198] usb 1-1: new full speed USB device using ohci_hcd and address 11
  298. [ 863.493882] usb 1-1: configuration #1 chosen from 1 choice
  299. [ 863.496853] hub 1-1:1.0: USB hub found
  300. [ 863.499767] hub 1-1:1.0: 4 ports detected
  301. [ 863.837745] usb 1-1.2: new low speed USB device using ohci_hcd and address 12
  302. [ 863.946620] usb 1-1.2: configuration #1 chosen from 1 choice
  303. [ 863.961632] input: HID 04d9:0499 as /class/input/input7
  304. [ 863.961710] input: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:02.2-1.2
  305. [ 864.177364] usb 1-1.4: new full speed USB device using ohci_hcd and address 13
  306. [ 864.185342] hub 1-1:1.0: cannot reset port 4 (err = -62)
  307. [ 864.188366] hub 1-1:1.0: cannot reset port 4 (err = -62)
  308. [ 864.191356] hub 1-1:1.0: cannot reset port 4 (err = -62)
  309. [ 864.194353] hub 1-1:1.0: cannot reset port 4 (err = -62)
  310. [ 864.197677] hub 1-1:1.0: cannot reset port 4 (err = -62)
  311. [ 864.197686] hub 1-1:1.0: Cannot enable port 4. Maybe the USB cable is bad?
  312. [ 864.200333] hub 1-1:1.0: cannot disable port 4 (err = -62)
  313. [ 864.203344] hub 1-1:1.0: cannot reset port 4 (err = -62)
  314. [ 864.206345] hub 1-1:1.0: cannot reset port 4 (err = -62)
  315. [ 864.209339] hub 1-1:1.0: cannot reset port 4 (err = -62)
  316. [ 864.212341] hub 1-1:1.0: cannot reset port 4 (err = -62)
  317. [ 864.215343] hub 1-1:1.0: cannot reset port 4 (err = -62)
  318. [ 864.215352] hub 1-1:1.0: Cannot enable port 4. Maybe the USB cable is bad?
  319. [ 864.218334] hub 1-1:1.0: cannot disable port 4 (err = -62)
  320. [ 864.221344] hub 1-1:1.0: cannot reset port 4 (err = -62)
  321. [ 864.224333] hub 1-1:1.0: cannot reset port 4 (err = -62)
  322. [ 864.227341] hub 1-1:1.0: cannot reset port 4 (err = -62)
  323. [ 864.230331] hub 1-1:1.0: cannot reset port 4 (err = -62)
  324. [ 864.233329] hub 1-1:1.0: cannot reset port 4 (err = -62)
  325. [ 864.233337] hub 1-1:1.0: Cannot enable port 4. Maybe the USB cable is bad?
  326. [ 864.236330] hub 1-1:1.0: cannot disable port 4 (err = -62)
  327. [ 864.239315] hub 1-1:1.0: cannot reset port 4 (err = -62)
  328. [ 864.242333] hub 1-1:1.0: cannot reset port 4 (err = -62)
  329. [ 864.245318] hub 1-1:1.0: cannot reset port 4 (err = -62)
  330. [ 864.248342] hub 1-1:1.0: cannot reset port 4 (err = -62)
  331. [ 864.251316] hub 1-1:1.0: cannot reset port 4 (err = -62)
  332. [ 864.251325] hub 1-1:1.0: Cannot enable port 4. Maybe the USB cable is bad?
  333. [ 864.254313] hub 1-1:1.0: cannot disable port 4 (err = -62)
  334. [ 864.257314] hub 1-1:1.0: cannot disable port 4 (err = -62)
  335. [ 864.260307] hub 1-1:1.0: hub_port_status failed (err = -62)
  336. [ 864.260333] usb 1-1: USB disconnect, address 11
  337. [ 864.260336] usb 1-1.2: USB disconnect, address 12
  338. [ 864.491135] usb 1-2: USB disconnect, address 10
  339. [ 864.499838] eth0: unregister 'cdc_ether' usb-0000:00:02.2-2, CDC Ethernet Device
  340. [ 865.163495] usb 1-2: new full speed USB device using ohci_hcd and address 17
  341. [ 865.384753] usb 1-2: configuration #2 chosen from 2 choices
  342. [ 865.396739] eth0: register 'cdc_ether' at usb-0000:00:02.2-2, CDC Ethernet Device, 00:11:f5:bf:08:59
  343. [ 865.727335] usb 1-2: USB disconnect, address 17
  344. [ 865.731409] eth0: unregister 'cdc_ether' usb-0000:00:02.2-2, CDC Ethernet Device
  345. [ 866.211129] usb 1-2: new full speed USB device using ohci_hcd and address 19
  346. [ 866.433141] usb 1-2: configuration #2 chosen from 2 choices
  347. [ 866.445114] eth0: register 'cdc_ether' at usb-0000:00:02.2-2, CDC Ethernet Device, 00:11:f5:bf:08:59
  348. [ 866.754919] usb 1-1: new full speed USB device using ohci_hcd and address 20
  349. [ 866.965672] usb 1-1: configuration #1 chosen from 1 choice
  350. [ 866.967796] hub 1-1:1.0: USB hub found
  351. [ 866.970703] hub 1-1:1.0: 4 ports detected
  352. [ 867.308500] usb 1-1.2: new low speed USB device using ohci_hcd and address 21
  353. [ 867.417564] usb 1-1.2: configuration #1 chosen from 1 choice
  354. [ 867.432567] input: HID 04d9:0499 as /class/input/input8
  355. [ 867.432652] input: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:02.2-1.2
  356. [ 867.648303] usb 1-1.4: new full speed USB device using ohci_hcd and address 22
  357. [ 867.762357] usb 1-1.4: configuration #1 chosen from 1 choice
  358. [ 867.771309] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 22 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7604
  359. [ 884.400400] eth0: no IPv6 routers present
  360. [ 2835.103174] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
  361. [ 2835.103339] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
  362. [ 2835.103474] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
  363. [ 2985.058698] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
  364. [ 2985.058728] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
  365. [ 2985.058762] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
  366. [ 3082.059320] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
  367. [ 3082.059707] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
  368. [ 3082.059921] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
  369. [ 3112.001713] usb 1-1: USB disconnect, address 20
  370. [ 3112.001720] usb 1-1.2: USB disconnect, address 21
  371. [ 3112.002872] usb 1-1.4: USB disconnect, address 22
  372. [ 3112.002917] drivers/usb/class/usblp.c: usblp0: removed
  373. [ 3112.650404] usb 1-2: USB disconnect, address 19
  374. [ 3112.654410] eth0: unregister 'cdc_ether' usb-0000:00:02.2-2, CDC Ethernet Device
  375. [ 3113.194142] usb 1-2: new full speed USB device using ohci_hcd and address 24
  376. [ 3114.325724] hub 1-0:1.0: Cannot enable port 2. Maybe the USB cable is bad?
  377. [ 3115.517287] hub 1-0:1.0: Cannot enable port 2. Maybe the USB cable is bad?
  378. [ 3116.708844] hub 1-0:1.0: Cannot enable port 2. Maybe the USB cable is bad?
  379. [ 3117.900410] hub 1-0:1.0: Cannot enable port 2. Maybe the USB cable is bad?
  380. [ 3118.204292] usb 1-1: new full speed USB device using ohci_hcd and address 28
  381. [ 3118.414089] usb 1-1: configuration #1 chosen from 1 choice
  382. [ 3118.417047] hub 1-1:1.0: USB hub found
  383. [ 3118.419988] hub 1-1:1.0: 4 ports detected
  384. [ 3118.844035] usb 1-2: new full speed USB device using ohci_hcd and address 29
  385. [ 3119.065698] usb 1-2: configuration #2 chosen from 2 choices
  386. [ 3119.077681] eth0: register 'cdc_ether' at usb-0000:00:02.2-2, CDC Ethernet Device, 00:11:f5:bf:08:59
  387. [ 3119.301447] usb 1-1.2: new low speed USB device using ohci_hcd and address 30
  388. [ 3119.410520] usb 1-1.2: configuration #1 chosen from 1 choice
  389. [ 3119.424541] input: HID 04d9:0499 as /class/input/input9
  390. [ 3119.424616] input: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:02.2-1.2
  391. [ 3119.641239] usb 1-1.4: new full speed USB device using ohci_hcd and address 31
  392. [ 3119.755304] usb 1-1.4: configuration #1 chosen from 1 choice
  393. [ 3119.764229] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 31 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7604
  394. [ 3144.506550] eth0: no IPv6 routers present
  395. [ 3934.193938] usb 1-1: USB disconnect, address 28
  396. [ 3934.193945] usb 1-1.2: USB disconnect, address 30
  397. [ 3934.194299] usb 1-1.4: USB disconnect, address 31
  398. [ 3934.194344] drivers/usb/class/usblp.c: usblp0: removed
  399. [ 3934.725620] usb 1-2: USB disconnect, address 29
  400. [ 3934.727113] eth0: unregister 'cdc_ether' usb-0000:00:02.2-2, CDC Ethernet Device
  401. [ 3942.016343] usb 1-1: new full speed USB device using ohci_hcd and address 32
  402. [ 3942.226272] usb 1-1: configuration #1 chosen from 1 choice
  403. [ 3942.229214] hub 1-1:1.0: USB hub found
  404. [ 3942.232155] hub 1-1:1.0: 4 ports detected
  405. [ 3942.656113] usb 1-2: new full speed USB device using ohci_hcd and address 33
  406. [ 3942.877877] usb 1-2: configuration #2 chosen from 2 choices
  407. [ 3942.889865] eth0: register 'cdc_ether' at usb-0000:00:02.2-2, CDC Ethernet Device, 00:11:f5:bf:08:59
  408. [ 3943.113632] usb 1-1.2: new low speed USB device using ohci_hcd and address 34
  409. [ 3943.222691] usb 1-1.2: configuration #1 chosen from 1 choice
  410. [ 3943.237701] input: HID 04d9:0499 as /class/input/input10
  411. [ 3943.237779] input: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:02.2-1.2
  412. [ 3943.453455] usb 1-1.4: new full speed USB device using ohci_hcd and address 35
  413. [ 3943.473409] hub 1-1:1.0: hub_port_status failed (err = -62)
  414. [ 3943.476414] hub 1-1:1.0: cannot reset port 4 (err = -62)
  415. [ 3943.479416] hub 1-1:1.0: cannot reset port 4 (err = -62)
  416. [ 3943.482418] hub 1-1:1.0: cannot reset port 4 (err = -62)
  417. [ 3943.485425] hub 1-1:1.0: cannot reset port 4 (err = -62)
  418. [ 3943.485434] hub 1-1:1.0: Cannot enable port 4. Maybe the USB cable is bad?
  419. [ 3943.488407] hub 1-1:1.0: cannot disable port 4 (err = -62)
  420. [ 3943.491402] hub 1-1:1.0: cannot reset port 4 (err = -62)
  421. [ 3943.494393] hub 1-1:1.0: cannot reset port 4 (err = -62)
  422. [ 3943.497393] hub 1-1:1.0: cannot reset port 4 (err = -62)
  423. [ 3943.500400] hub 1-1:1.0: cannot reset port 4 (err = -62)
  424. [ 3943.503407] hub 1-1:1.0: cannot reset port 4 (err = -62)
  425. [ 3943.503417] hub 1-1:1.0: Cannot enable port 4. Maybe the USB cable is bad?
  426. [ 3943.506404] hub 1-1:1.0: cannot disable port 4 (err = -62)
  427. [ 3943.509399] hub 1-1:1.0: cannot reset port 4 (err = -62)
  428. [ 3943.512392] hub 1-1:1.0: cannot reset port 4 (err = -62)
  429. [ 3943.515376] hub 1-1:1.0: cannot reset port 4 (err = -62)
  430. [ 3943.518376] hub 1-1:1.0: cannot reset port 4 (err = -62)
  431. [ 3943.521385] hub 1-1:1.0: cannot reset port 4 (err = -62)
  432. [ 3943.521393] hub 1-1:1.0: Cannot enable port 4. Maybe the USB cable is bad?
  433. [ 3943.524390] hub 1-1:1.0: cannot disable port 4 (err = -62)
  434. [ 3943.527388] hub 1-1:1.0: cannot reset port 4 (err = -62)
  435. [ 3943.530414] hub 1-1:1.0: cannot reset port 4 (err = -62)
  436. [ 3943.533384] hub 1-1:1.0: cannot reset port 4 (err = -62)
  437. [ 3943.536374] hub 1-1:1.0: cannot reset port 4 (err = -62)
  438. [ 3943.539382] hub 1-1:1.0: cannot reset port 4 (err = -62)
  439. [ 3943.539392] hub 1-1:1.0: Cannot enable port 4. Maybe the USB cable is bad?
  440. [ 3943.542379] hub 1-1:1.0: cannot disable port 4 (err = -62)
  441. [ 3943.545383] hub 1-1:1.0: cannot disable port 4 (err = -62)
  442. [ 3943.548375] hub 1-1:1.0: hub_port_status failed (err = -62)
  443. [ 3943.548402] usb 1-1: USB disconnect, address 32
  444. [ 3943.548405] usb 1-1.2: USB disconnect, address 34
  445. [ 3943.772192] usb 1-2: USB disconnect, address 33
  446. [ 3943.779790] eth0: unregister 'cdc_ether' usb-0000:00:02.2-2, CDC Ethernet Device
  447. [ 3944.571411] usb 1-2: new full speed USB device using ohci_hcd and address 39
  448. [ 3944.792739] usb 1-2: configuration #2 chosen from 2 choices
  449. [ 3944.804723] eth0: register 'cdc_ether' at usb-0000:00:02.2-2, CDC Ethernet Device, 00:11:f5:bf:08:59
  450. [ 3945.111200] usb 1-1: new full speed USB device using ohci_hcd and address 40
  451. [ 3945.320440] usb 1-1: configuration #1 chosen from 1 choice
  452. [ 3945.323399] hub 1-1:1.0: USB hub found
  453. [ 3945.326320] hub 1-1:1.0: 4 ports detected
  454. [ 3945.664114] usb 1-1.2: new low speed USB device using ohci_hcd and address 41
  455. [ 3945.777169] usb 1-1.2: configuration #1 chosen from 1 choice
  456. [ 3945.792177] input: HID 04d9:0499 as /class/input/input11
  457. [ 3945.792255] input: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:02.2-1.2
  458. [ 3946.008927] usb 1-1.4: new full speed USB device using ohci_hcd and address 42
  459. [ 3946.126971] usb 1-1.4: configuration #1 chosen from 1 choice
  460. [ 3946.135912] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 42 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7604
  461. [ 3946.401636] usb 1-1: USB disconnect, address 40
  462. [ 3946.401642] usb 1-1.2: USB disconnect, address 41
  463. [ 3946.403158] usb 1-1.4: USB disconnect, address 42
  464. [ 3946.403214] drivers/usb/class/usblp.c: usblp0: removed
  465. [ 3946.770421] usb 1-2: USB disconnect, address 39
  466. [ 3946.778679] eth0: unregister 'cdc_ether' usb-0000:00:02.2-2, CDC Ethernet Device
  467. [ 3947.870183] usb 1-2: new full speed USB device using ohci_hcd and address 43
  468. [ 3948.091781] usb 1-2: configuration #2 chosen from 2 choices
  469. [ 3948.103770] eth0: register 'cdc_ether' at usb-0000:00:02.2-2, CDC Ethernet Device, 00:11:f5:bf:08:59
  470. [ 3948.481997] usb 1-2: USB disconnect, address 43
  471. [ 3948.486054] eth0: unregister 'cdc_ether' usb-0000:00:02.2-2, CDC Ethernet Device
  472. [ 3948.893822] usb 1-2: new full speed USB device using ohci_hcd and address 45
  473. [ 3949.115172] usb 1-2: configuration #2 chosen from 2 choices
  474. [ 3949.127178] eth0: register 'cdc_ether' at usb-0000:00:02.2-2, CDC Ethernet Device, 00:11:f5:bf:08:59
  475. [ 3949.468889] usb 1-2: USB disconnect, address 45
  476. [ 3949.468998] eth0: unregister 'cdc_ether' usb-0000:00:02.2-2, CDC Ethernet Device
  477. [ 3950.421255] usb 1-2: new full speed USB device using ohci_hcd and address 47
  478. [ 3950.643267] usb 1-2: configuration #2 chosen from 2 choices
  479. [ 3950.655225] eth0: register 'cdc_ether' at usb-0000:00:02.2-2, CDC Ethernet Device, 00:11:f5:bf:08:59
  480. [ 3950.853130] usb 1-2: USB disconnect, address 47
  481. [ 3950.853242] eth0: unregister 'cdc_ether' usb-0000:00:02.2-2, CDC Ethernet Device
  482. [ 3951.420888] usb 1-2: new full speed USB device using ohci_hcd and address 48
  483. [ 3951.642672] usb 1-2: configuration #2 chosen from 2 choices
  484. [ 3951.654676] eth0: register 'cdc_ether' at usb-0000:00:02.2-2, CDC Ethernet Device, 00:11:f5:bf:08:59
  485. [ 3951.960676] usb 1-1: new full speed USB device using ohci_hcd and address 49
  486. [ 3952.170356] usb 1-1: configuration #1 chosen from 1 choice
  487. [ 3952.173317] hub 1-1:1.0: USB hub found
  488. [ 3952.176258] hub 1-1:1.0: 4 ports detected
  489. [ 3952.514044] usb 1-1.2: new low speed USB device using ohci_hcd and address 50
  490. [ 3952.623114] usb 1-1.2: configuration #1 chosen from 1 choice
  491. [ 3952.638131] input: HID 04d9:0499 as /class/input/input12
  492. [ 3952.638205] input: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:02.2-1.2
  493. [ 3952.853855] usb 1-1.4: new full speed USB device using ohci_hcd and address 51
  494. [ 3952.967914] usb 1-1.4: configuration #1 chosen from 1 choice
  495. [ 3952.976852] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 51 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7604
  496. [ 3958.288582] usb 1-1: USB disconnect, address 49
  497. [ 3958.288589] usb 1-1.2: USB disconnect, address 50
  498. [ 3958.290704] usb 1-1.4: USB disconnect, address 51
  499. [ 3958.290758] drivers/usb/class/usblp.c: usblp0: removed
  500. [ 3958.765301] usb 1-2: USB disconnect, address 48
  501. [ 3958.774269] eth0: unregister 'cdc_ether' usb-0000:00:02.2-2, CDC Ethernet Device
  502. [ 3959.617853] usb 1-2: new full speed USB device using ohci_hcd and address 52
  503. [ 3959.839812] usb 1-2: configuration #2 chosen from 2 choices
  504. [ 3959.851805] eth0: register 'cdc_ether' at usb-0000:00:02.2-2, CDC Ethernet Device, 00:11:f5:bf:08:59
  505. [ 3960.161672] usb 1-1: new full speed USB device using ohci_hcd and address 53
  506. [ 3960.371501] usb 1-1: configuration #1 chosen from 1 choice
  507. [ 3960.374469] hub 1-1:1.0: USB hub found
  508. [ 3960.377393] hub 1-1:1.0: 4 ports detected
  509. [ 3960.715188] usb 1-1.2: new low speed USB device using ohci_hcd and address 54
  510. [ 3960.824242] usb 1-1.2: configuration #1 chosen from 1 choice
  511. [ 3960.839251] input: HID 04d9:0499 as /class/input/input13
  512. [ 3960.839335] input: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:02.2-1.2
  513. [ 3961.054987] usb 1-1.4: new full speed USB device using ohci_hcd and address 55
  514. [ 3961.169035] usb 1-1.4: configuration #1 chosen from 1 choice
  515. [ 3961.177986] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 55 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7604
  516. [ 3979.879776] usb 1-1: USB disconnect, address 53
  517. [ 3979.879783] usb 1-1.2: USB disconnect, address 54
  518. [ 3979.882768] usb 1-1.4: USB disconnect, address 55
  519. [ 3979.882823] drivers/usb/class/usblp.c: usblp0: removed
  520. [ 3980.355492] usb 1-2: USB disconnect, address 52
  521. [ 3980.362292] eth0: unregister 'cdc_ether' usb-0000:00:02.2-2, CDC Ethernet Device
  522. [ 3987.355615] usb 1-2: new full speed USB device using ohci_hcd and address 57
  523. [ 3987.577265] usb 1-2: configuration #2 chosen from 2 choices
  524. [ 3987.589247] eth0: register 'cdc_ether' at usb-0000:00:02.2-2, CDC Ethernet Device, 00:11:f5:bf:08:59
  525. [ 3987.895441] usb 1-1: new full speed USB device using ohci_hcd and address 58
  526. [ 3988.083377] usb 1-2: USB disconnect, address 57
  527. [ 3988.087444] eth0: unregister 'cdc_ether' usb-0000:00:02.2-2, CDC Ethernet Device
  528. [ 3989.802716] usb 1-2: new full speed USB device using ohci_hcd and address 59
  529. [ 3990.024751] usb 1-2: configuration #2 chosen from 2 choices
  530. [ 3990.036707] eth0: register 'cdc_ether' at usb-0000:00:02.2-2, CDC Ethernet Device, 00:11:f5:bf:08:59
  531. [ 3990.346513] usb 1-1: new full speed USB device using ohci_hcd and address 60
  532. [ 3990.556436] usb 1-1: configuration #1 chosen from 1 choice
  533. [ 3990.559393] hub 1-1:1.0: USB hub found
  534. [ 3990.562331] hub 1-1:1.0: 4 ports detected
  535. [ 3990.900121] usb 1-1.2: new low speed USB device using ohci_hcd and address 61
  536. [ 3991.009180] usb 1-1.2: configuration #1 chosen from 1 choice
  537. [ 3991.024210] input: HID 04d9:0499 as /class/input/input14
  538. [ 3991.024296] input: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:02.2-1.2
  539. [ 3991.239948] usb 1-1.4: new full speed USB device using ohci_hcd and address 62
  540. [ 3991.353968] usb 1-1.4: configuration #1 chosen from 1 choice
  541. [ 3991.362911] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 62 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7604
  542. [ 4004.653234] eth0: no IPv6 routers present
  543. [ 4222.958591] usb 1-1: USB disconnect, address 60
  544. [ 4222.958598] usb 1-1.2: USB disconnect, address 61
  545. [ 4222.958985] usb 1-1.4: USB disconnect, address 62
  546. [ 4222.959038] drivers/usb/class/usblp.c: usblp0: removed
  547. [ 4223.546227] usb 1-2: USB disconnect, address 59
  548. [ 4223.552584] eth0: unregister 'cdc_ether' usb-0000:00:02.2-2, CDC Ethernet Device
  549. [ 4224.548107] usb 1-2: new full speed USB device using ohci_hcd and address 63
  550. [ 4224.769478] usb 1-2: configuration #2 chosen from 2 choices
  551. [ 4224.781461] eth0: register 'cdc_ether' at usb-0000:00:02.2-2, CDC Ethernet Device, 00:11:f5:bf:08:59
  552. [ 4225.087934] usb 1-1: new full speed USB device using ohci_hcd and address 64
  553. [ 4225.297190] usb 1-1: configuration #1 chosen from 1 choice
  554. [ 4225.300139] hub 1-1:1.0: USB hub found
  555. [ 4225.303064] hub 1-1:1.0: 4 ports detected
  556. [ 4225.640854] usb 1-1.2: new low speed USB device using ohci_hcd and address 65
  557. [ 4225.749914] usb 1-1.2: configuration #1 chosen from 1 choice
  558. [ 4225.764923] input: HID 04d9:0499 as /class/input/input15
  559. [ 4225.765003] input: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:02.2-1.2
  560. [ 4225.980668] usb 1-1.4: new full speed USB device using ohci_hcd and address 66
  561. [ 4226.094711] usb 1-1.4: configuration #1 chosen from 1 choice
  562. [ 4226.103653] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 66 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7604
  563. [ 4240.790112] eth0: no IPv6 routers present
  564. [ 4506.722664] usb 1-1: USB disconnect, address 64
  565. [ 4506.722672] usb 1-1.2: USB disconnect, address 65
  566. [ 4506.724482] usb 1-1.4: USB disconnect, address 66
  567. [ 4506.724543] drivers/usb/class/usblp.c: usblp0: removed
  568. [ 4507.319309] usb 1-2: USB disconnect, address 63
  569. [ 4507.323893] eth0: unregister 'cdc_ether' usb-0000:00:02.2-2, CDC Ethernet Device
  570. [ 4522.958062] usb 1-1: new full speed USB device using ohci_hcd and address 67
  571. [ 4523.168047] usb 1-1: configuration #1 chosen from 1 choice
  572. [ 4523.170971] hub 1-1:1.0: USB hub found
  573. [ 4523.173878] hub 1-1:1.0: 4 ports detected
  574. [ 4523.597794] usb 1-2: new full speed USB device using ohci_hcd and address 68
  575. [ 4523.819626] usb 1-2: configuration #2 chosen from 2 choices
  576. [ 4523.831612] eth0: register 'cdc_ether' at usb-0000:00:02.2-2, CDC Ethernet Device, 00:11:f5:bf:08:59
  577. [ 4524.055361] usb 1-1.2: new low speed USB device using ohci_hcd and address 69
  578. [ 4524.164432] usb 1-1.2: configuration #1 chosen from 1 choice
  579. [ 4524.179441] input: HID 04d9:0499 as /class/input/input16
  580. [ 4524.179522] input: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:02.2-1.2
  581. [ 4524.395157] usb 1-1.4: new full speed USB device using ohci_hcd and address 70
  582. [ 4524.509238] usb 1-1.4: configuration #1 chosen from 1 choice
  583. [ 4524.518189] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 70 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7604
  584. [ 4543.442440] eth0: no IPv6 routers present
  585. [ 4753.663092] usb 1-1: USB disconnect, address 67
  586. [ 4753.663099] usb 1-1.2: USB disconnect, address 69
  587. [ 4753.665267] usb 1-1.4: USB disconnect, address 70
  588. [ 4753.665324] drivers/usb/class/usblp.c: usblp0: removed
  589. [ 4754.308709] usb 1-2: USB disconnect, address 68
  590. [ 4754.316745] eth0: unregister 'cdc_ether' usb-0000:00:02.2-2, CDC Ethernet Device
  591. [ 4759.798642] usb 1-1: new full speed USB device using ohci_hcd and address 71
  592. [ 4760.008561] usb 1-1: configuration #1 chosen from 1 choice
  593. [ 4760.011512] hub 1-1:1.0: USB hub found
  594. [ 4760.014452] hub 1-1:1.0: 4 ports detected
  595. [ 4760.438416] usb 1-2: new full speed USB device using ohci_hcd and address 72
  596. [ 4760.660185] usb 1-2: configuration #2 chosen from 2 choices
  597. [ 4760.672160] eth0: register 'cdc_ether' at usb-0000:00:02.2-2, CDC Ethernet Device, 00:11:f5:bf:08:59
  598. [ 4760.895930] usb 1-1.2: new low speed USB device using ohci_hcd and address 73
  599. [ 4761.004983] usb 1-1.2: configuration #1 chosen from 1 choice
  600. [ 4761.020016] input: HID 04d9:0499 as /class/input/input17
  601. [ 4761.020095] input: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:02.2-1.2
  602. [ 4761.235727] usb 1-1.4: new full speed USB device using ohci_hcd and address 74
  603. [ 4761.349768] usb 1-1.4: configuration #1 chosen from 1 choice
  604. [ 4761.358726] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 74 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7604
  605. [ 4775.968662] eth0: no IPv6 routers present
  606. [ 4880.541900] usb 1-1: USB disconnect, address 71
  607. [ 4880.541907] usb 1-1.2: USB disconnect, address 73
  608. [ 4880.546462] usb 1-1.4: USB disconnect, address 74
  609. [ 4880.546516] drivers/usb/class/usblp.c: usblp0: removed
  610. [ 4881.202506] usb 1-2: USB disconnect, address 72
  611. [ 4881.205928] eth0: unregister 'cdc_ether' usb-0000:00:02.2-2, CDC Ethernet Device
  612. [ 4881.753643] usb 1-2: new full speed USB device using ohci_hcd and address 76
  613. [ 4881.975197] usb 1-2: configuration #2 chosen from 2 choices
  614. [ 4881.987185] eth0: register 'cdc_ether' at usb-0000:00:02.2-2, CDC Ethernet Device, 00:11:f5:bf:08:59
  615. [ 4882.293445] usb 1-1: new full speed USB device using ohci_hcd and address 77
  616. [ 4882.502903] usb 1-1: configuration #1 chosen from 1 choice
  617. [ 4882.505856] hub 1-1:1.0: USB hub found
  618. [ 4882.508779] hub 1-1:1.0: 4 ports detected
  619. [ 4882.846570] usb 1-1.2: new low speed USB device using ohci_hcd and address 78
  620. [ 4882.955624] usb 1-1.2: configuration #1 chosen from 1 choice
  621. [ 4882.970639] input: HID 04d9:0499 as /class/input/input18
  622. [ 4882.970714] input: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:02.2-1.2
  623. [ 4883.186374] usb 1-1.4: new full speed USB device using ohci_hcd and address 79
  624. [ 4883.300419] usb 1-1.4: configuration #1 chosen from 1 choice
  625. [ 4883.309380] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 79 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7604
  626. [ 4899.714999] eth0: no IPv6 routers present
  627. [ 5895.175934] usb 1-1: USB disconnect, address 77
  628. [ 5895.175941] usb 1-1.2: USB disconnect, address 78
  629. [ 5895.180176] usb 1-1.4: USB disconnect, address 79
  630. [ 5895.180230] drivers/usb/class/usblp.c: usblp0: removed
  631. [ 5896.255361] usb 1-1: new full speed USB device using ohci_hcd and address 81
  632. [ 5896.465336] usb 1-1: configuration #1 chosen from 1 choice
  633. [ 5896.468272] hub 1-1:1.0: USB hub found
  634. [ 5896.471226] hub 1-1:1.0: 4 ports detected
  635. [ 5896.591389] usb 1-2: USB disconnect, address 76
  636. [ 5896.599344] eth0: unregister 'cdc_ether' usb-0000:00:02.2-2, CDC Ethernet Device
  637. [ 5896.947109] usb 1-2: new full speed USB device using ohci_hcd and address 82
  638. [ 5897.168905] usb 1-2: configuration #2 chosen from 2 choices
  639. [ 5897.180899] eth0: register 'cdc_ether' at usb-0000:00:02.2-2, CDC Ethernet Device, 00:11:f5:bf:08:59
  640. [ 5897.404660] usb 1-1.2: new low speed USB device using ohci_hcd and address 83
  641. [ 5897.513713] usb 1-1.2: configuration #1 chosen from 1 choice
  642. [ 5897.528717] input: HID 04d9:0499 as /class/input/input19
  643. [ 5897.528795] input: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:02.2-1.2
  644. [ 5897.744460] usb 1-1.4: new full speed USB device using ohci_hcd and address 84
  645. [ 5897.858517] usb 1-1.4: configuration #1 chosen from 1 choice
  646. [ 5897.867461] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 84 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7604
  647. [ 5916.108019] eth0: no IPv6 routers present
  648. [ 6294.397220] usb 1-1: USB disconnect, address 81
  649. [ 6294.397227] usb 1-1.2: USB disconnect, address 83
  650. [ 6294.400881] usb 1-1.4: USB disconnect, address 84
  651. [ 6294.400938] drivers/usb/class/usblp.c: usblp0: removed
  652. [ 6295.069688] usb 1-2: USB disconnect, address 82
  653. [ 6295.072307] eth0: unregister 'cdc_ether' usb-0000:00:02.2-2, CDC Ethernet Device
  654. [ 6300.462235] usb 1-1: new full speed USB device using ohci_hcd and address 86
  655. [ 6300.672165] usb 1-1: configuration #1 chosen from 1 choice
  656. [ 6300.675118] hub 1-1:1.0: USB hub found
  657. [ 6300.678045] hub 1-1:1.0: 4 ports detected
  658. [ 6301.102002] usb 1-2: new full speed USB device using ohci_hcd and address 87
  659. [ 6301.323769] usb 1-2: configuration #2 chosen from 2 choices
  660. [ 6301.335773] eth0: register 'cdc_ether' at usb-0000:00:02.2-2, CDC Ethernet Device, 00:11:f5:bf:08:59
  661. [ 6301.559527] usb 1-1.2: new low speed USB device using ohci_hcd and address 88
  662. [ 6301.668572] usb 1-1.2: configuration #1 chosen from 1 choice
  663. [ 6301.683593] input: HID 04d9:0499 as /class/input/input20
  664. [ 6301.683672] input: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:02.2-1.2
  665. [ 6301.899325] usb 1-1.4: new full speed USB device using ohci_hcd and address 89
  666. [ 6302.013373] usb 1-1.4: configuration #1 chosen from 1 choice
  667. [ 6302.022330] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 89 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7604
  668. [ 6307.998137] usb 1-1: USB disconnect, address 86
  669. [ 6307.998144] usb 1-1.2: USB disconnect, address 88
  670. [ 6307.999834] usb 1-1.4: USB disconnect, address 89
  671. [ 6307.999890] drivers/usb/class/usblp.c: usblp0: removed
  672. [ 6308.613294] usb 1-2: USB disconnect, address 87
  673. [ 6308.615309] eth0: unregister 'cdc_ether' usb-0000:00:02.2-2, CDC Ethernet Device
  674. [ 6309.714826] usb 1-2: new full speed USB device using ohci_hcd and address 90
  675. [ 6309.936667] usb 1-2: configuration #2 chosen from 2 choices
  676. [ 6309.948643] eth0: register 'cdc_ether' at usb-0000:00:02.2-2, CDC Ethernet Device, 00:11:f5:bf:08:59
  677. [ 6310.258679] usb 1-1: new full speed USB device using ohci_hcd and address 91
  678. [ 6310.468345] usb 1-1: configuration #1 chosen from 1 choice
  679. [ 6310.471299] hub 1-1:1.0: USB hub found
  680. [ 6310.474240] hub 1-1:1.0: 4 ports detected
  681. [ 6310.812029] usb 1-1.2: new low speed USB device using ohci_hcd and address 92
  682. [ 6310.921092] usb 1-1.2: configuration #1 chosen from 1 choice
  683. [ 6310.936091] input: HID 04d9:0499 as /class/input/input21
  684. [ 6310.936167] input: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:02.2-1.2
  685. [ 6311.151837] usb 1-1.4: new full speed USB device using ohci_hcd and address 93
  686. [ 6311.265880] usb 1-1.4: configuration #1 chosen from 1 choice
  687. [ 6311.274843] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 93 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7604
  688. [ 6325.045158] eth0: no IPv6 routers present
  689. [ 6339.707901] usb 1-1: USB disconnect, address 91
  690. [ 6339.707906] usb 1-1.2: USB disconnect, address 92
  691. [ 6339.708303] usb 1-1.4: USB disconnect, address 93
  692. [ 6339.708356] drivers/usb/class/usblp.c: usblp0: removed
  693. [ 6340.399608] usb 1-2: USB disconnect, address 90
  694. [ 6340.408045] eth0: unregister 'cdc_ether' usb-0000:00:02.2-2, CDC Ethernet Device
  695. [ 6340.879329] usb 1-2: new full speed USB device using ohci_hcd and address 94
  696. [ 6341.101391] usb 1-2: configuration #2 chosen from 2 choices
  697. [ 6341.113165] eth0: register 'cdc_ether' at usb-0000:00:02.2-2, CDC Ethernet Device, 00:11:f5:bf:08:59
  698. [ 6341.423403] usb 1-1: new full speed USB device using ohci_hcd and address 95
  699. [ 6341.632866] usb 1-1: configuration #1 chosen from 1 choice
  700. [ 6341.635809] hub 1-1:1.0: USB hub found
  701. [ 6341.638752] hub 1-1:1.0: 4 ports detected
  702. [ 6341.976578] usb 1-1.2: new low speed USB device using ohci_hcd and address 96
  703. [ 6342.085718] usb 1-1.2: configuration #1 chosen from 1 choice
  704. [ 6342.100624] input: HID 04d9:0499 as /class/input/input22
  705. [ 6342.100688] input: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:02.2-1.2
  706. [ 6342.316522] usb 1-1.4: new full speed USB device using ohci_hcd and address 97
  707. [ 6342.430407] usb 1-1.4: configuration #1 chosen from 1 choice
  708. [ 6342.439350] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 97 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7604
  709. [ 6342.674180] usb 1-1: USB disconnect, address 95
  710. [ 6342.674185] usb 1-1.2: USB disconnect, address 96
  711. [ 6342.674574] usb 1-1.4: USB disconnect, address 97
  712. [ 6342.674620] drivers/usb/class/usblp.c: usblp0: removed
  713. [ 6343.197780] usb 1-2: USB disconnect, address 94
  714. [ 6343.206559] eth0: unregister 'cdc_ether' usb-0000:00:02.2-2, CDC Ethernet Device
  715. [ 6344.649942] usb 1-2: new full speed USB device using ohci_hcd and address 99
  716. [ 6344.871799] usb 1-2: configuration #2 chosen from 2 choices
  717. [ 6344.883805] eth0: register 'cdc_ether' at usb-0000:00:02.2-2, CDC Ethernet Device, 00:11:f5:bf:08:59
  718. [ 6345.193790] usb 1-1: new full speed USB device using ohci_hcd and address 100
  719. [ 6345.403503] usb 1-1: configuration #1 chosen from 1 choice
  720. [ 6345.406446] hub 1-1:1.0: USB hub found
  721. [ 6345.409386] hub 1-1:1.0: 4 ports detected
  722. [ 6345.747175] usb 1-1.2: new low speed USB device using ohci_hcd and address 101
  723. [ 6345.856234] usb 1-1.2: configuration #1 chosen from 1 choice
  724. [ 6345.871240] input: HID 04d9:0499 as /class/input/input23
  725. [ 6345.871312] input: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:02.2-1.2
  726. [ 6346.086974] usb 1-1.4: new full speed USB device using ohci_hcd and address 102
  727. [ 6346.201030] usb 1-1.4: configuration #1 chosen from 1 choice
  728. [ 6346.210984] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 102 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7604
  729. [ 6346.568653] usb 1-1: USB disconnect, address 100
  730. [ 6346.568660] usb 1-1.2: USB disconnect, address 101
  731. [ 6346.569063] usb 1-1.4: USB disconnect, address 102
  732. [ 6346.569114] drivers/usb/class/usblp.c: usblp0: removed
  733. [ 6347.248983] usb 1-1: new full speed USB device using ohci_hcd and address 103
  734. [ 6347.458273] usb 1-1: configuration #1 chosen from 1 choice
  735. [ 6347.461219] hub 1-1:1.0: USB hub found
  736. [ 6347.464163] hub 1-1:1.0: 4 ports detected
  737. [ 6347.801965] usb 1-1.2: new low speed USB device using ohci_hcd and address 104
  738. [ 6347.911013] usb 1-1.2: configuration #1 chosen from 1 choice
  739. [ 6347.934899] hub 1-1:1.0: hub_port_status failed (err = -62)
  740. [ 6347.962877] hub 1-1:1.0: hub_port_status failed (err = -62)
  741. [ 6347.989199] usb 1-1: USB disconnect, address 103
  742. [ 6347.989203] usb 1-1.2: USB disconnect, address 104
  743. [ 6348.345597] usb 1-2: USB disconnect, address 99
  744. [ 6348.352663] eth0: unregister 'cdc_ether' usb-0000:00:02.2-2, CDC Ethernet Device
  745. [ 6349.096305] usb 1-2: new full speed USB device using ohci_hcd and address 105
  746. [ 6349.318170] usb 1-2: configuration #2 chosen from 2 choices
  747. [ 6349.330157] eth0: register 'cdc_ether' at usb-0000:00:02.2-2, CDC Ethernet Device, 00:11:f5:bf:08:59
  748. [ 6349.640143] usb 1-1: new full speed USB device using ohci_hcd and address 106
  749. [ 6349.849854] usb 1-1: configuration #1 chosen from 1 choice
  750. [ 6349.852805] hub 1-1:1.0: USB hub found
  751. [ 6349.855747] hub 1-1:1.0: 4 ports detected
  752. [ 6350.193543] usb 1-1.2: new low speed USB device using ohci_hcd and address 107
  753. [ 6350.302595] usb 1-1.2: configuration #1 chosen from 1 choice
  754. [ 6350.317608] input: HID 04d9:0499 as /class/input/input24
  755. [ 6350.317677] input: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:02.2-1.2
  756. [ 6350.533344] usb 1-1.4: new full speed USB device using ohci_hcd and address 108
  757. [ 6350.647402] usb 1-1.4: configuration #1 chosen from 1 choice
  758. [ 6350.656339] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 108 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7604
  759. [ 6351.741583] usb 1-1: USB disconnect, address 106
  760. [ 6351.741590] usb 1-1.2: USB disconnect, address 107
  761. [ 6351.741994] usb 1-1.4: USB disconnect, address 108
  762. [ 6351.742048] drivers/usb/class/usblp.c: usblp0: removed
  763. [ 6352.467077] usb 1-2: USB disconnect, address 105
  764. [ 6352.471136] eth0: unregister 'cdc_ether' usb-0000:00:02.2-2, CDC Ethernet Device
  765. [ 6353.246763] usb 1-2: new full speed USB device using ohci_hcd and address 109
  766. [ 6353.468702] usb 1-2: configuration #2 chosen from 2 choices
  767. [ 6353.480691] eth0: register 'cdc_ether' at usb-0000:00:02.2-2, CDC Ethernet Device, 00:11:f5:bf:08:59
  768. [ 6353.790582] usb 1-1: new full speed USB device using ohci_hcd and address 110
  769. [ 6354.000402] usb 1-1: configuration #1 chosen from 1 choice
  770. [ 6354.003344] hub 1-1:1.0: USB hub found
  771. [ 6354.006287] hub 1-1:1.0: 4 ports detected
  772. [ 6354.344075] usb 1-1.2: new low speed USB device using ohci_hcd and address 111
  773. [ 6354.453142] usb 1-1.2: configuration #1 chosen from 1 choice
  774. [ 6354.468161] input: HID 04d9:0499 as /class/input/input25
  775. [ 6354.468236] input: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:02.2-1.2
  776. [ 6354.683871] usb 1-1.4: new full speed USB device using ohci_hcd and address 112
  777. [ 6354.797926] usb 1-1.4: configuration #1 chosen from 1 choice
  778. [ 6354.806877] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 112 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7604
  779. [ 6372.295716] eth0: no IPv6 routers present
  780. [ 9435.246375] usb 1-1: USB disconnect, address 110
  781. [ 9435.246382] usb 1-1.2: USB disconnect, address 111
  782. [ 9435.250268] usb 1-1.4: USB disconnect, address 112
  783. [ 9435.250329] drivers/usb/class/usblp.c: usblp0: removed
  784. [ 9435.930794] usb 1-2: USB disconnect, address 109
  785. [ 9435.937548] eth0: unregister 'cdc_ether' usb-0000:00:02.2-2, CDC Ethernet Device
  786. [ 9436.681190] usb 1-2: new full speed USB device using ohci_hcd and address 113
  787. [ 9436.902370] usb 1-2: configuration #2 chosen from 2 choices
  788. [ 9436.914380] eth0: register 'cdc_ether' at usb-0000:00:02.2-2, CDC Ethernet Device, 00:11:f5:bf:08:59
  789. [ 9437.221019] usb 1-1: new full speed USB device using ohci_hcd and address 114
  790. [ 9437.431070] usb 1-1: configuration #1 chosen from 1 choice
  791. [ 9437.434011] hub 1-1:1.0: USB hub found
  792. [ 9437.436945] hub 1-1:1.0: 4 ports detected
  793. [ 9437.774738] usb 1-1.2: new low speed USB device using ohci_hcd and address 115
  794. [ 9437.883805] usb 1-1.2: configuration #1 chosen from 1 choice
  795. [ 9437.898822] input: HID 04d9:0499 as /class/input/input26
  796. [ 9437.898908] input: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:02.2-1.2
  797. [ 9438.114537] usb 1-1.4: new full speed USB device using ohci_hcd and address 116
  798. [ 9438.228656] usb 1-1.4: configuration #1 chosen from 1 choice
  799. [ 9438.237553] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 116 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7604
  800. [ 9454.094764] eth0: no IPv6 routers present
  801. [10225.121070] usb 1-1: USB disconnect, address 114
  802. [10225.121077] usb 1-1.2: USB disconnect, address 115
  803. [10225.122739] usb 1-1.4: USB disconnect, address 116
  804. [10225.122797] drivers/usb/class/usblp.c: usblp0: removed
  805. [10225.828167] usb 1-2: USB disconnect, address 113
  806. [10225.834128] eth0: unregister 'cdc_ether' usb-0000:00:02.2-2, CDC Ethernet Device
  807. [10226.329865] usb 1-2: new full speed USB device using ohci_hcd and address 117
  808. [10226.551904] usb 1-2: configuration #2 chosen from 2 choices
  809. [10226.564213] eth0: register 'cdc_ether' at usb-0000:00:02.2-2, CDC Ethernet Device, 00:11:f5:bf:08:59
  810. [10226.873696] usb 1-1: new full speed USB device using ohci_hcd and address 118
  811. [10227.083589] usb 1-1: configuration #1 chosen from 1 choice
  812. [10227.086549] hub 1-1:1.0: USB hub found
  813. [10227.089467] hub 1-1:1.0: 4 ports detected
  814. [10227.427255] usb 1-1.2: new low speed USB device using ohci_hcd and address 119
  815. [10227.536324] usb 1-1.2: configuration #1 chosen from 1 choice
  816. [10227.551337] input: HID 04d9:0499 as /class/input/input27
  817. [10227.551422] input: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:02.2-1.2
  818. [10227.767058] usb 1-1.4: new full speed USB device using ohci_hcd and address 120
  819. [10227.881124] usb 1-1.4: configuration #1 chosen from 1 choice
  820. [10227.890065] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 120 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7604
  821. [10244.966966] eth0: no IPv6 routers present
  822. [12060.431736] usb 1-1: USB disconnect, address 118
  823. [12060.431743] usb 1-1.2: USB disconnect, address 119
  824. [12060.433605] usb 1-1.4: USB disconnect, address 120
  825. [12060.433664] drivers/usb/class/usblp.c: usblp0: removed
  826. [12061.073365] usb 1-2: USB disconnect, address 117
  827. [12061.081059] eth0: unregister 'cdc_ether' usb-0000:00:02.2-2, CDC Ethernet Device
  828. [12061.452828] usb 1-2: new full speed USB device using ohci_hcd and address 121
  829. [12061.674153] usb 1-2: configuration #2 chosen from 2 choices
  830. [12061.686158] eth0: register 'cdc_ether' at usb-0000:00:02.2-2, CDC Ethernet Device, 00:11:f5:bf:08:59
  831. [12061.992657] usb 1-1: new full speed USB device using ohci_hcd and address 122
  832. [12062.201843] usb 1-1: configuration #1 chosen from 1 choice
  833. [12062.204788] hub 1-1:1.0: USB hub found
  834. [12062.207726] hub 1-1:1.0: 4 ports detected
  835. [12062.545530] usb 1-1.2: new low speed USB device using ohci_hcd and address 123
  836. [12062.654582] usb 1-1.2: configuration #1 chosen from 1 choice
  837. [12062.669628] input: HID 04d9:0499 as /class/input/input28
  838. [12062.669717] input: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:02.2-1.2
  839. [12062.886330] usb 1-1.4: new full speed USB device using ohci_hcd and address 124
  840. [12063.000412] usb 1-1.4: configuration #1 chosen from 1 choice
  841. [12063.009328] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 124 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7604
  842. [12078.314585] eth0: no IPv6 routers present
  843. [12338.619703] usb 1-1: USB disconnect, address 122
  844. [12338.619711] usb 1-1.2: USB disconnect, address 123
  845. [12338.622998] usb 1-1.4: USB disconnect, address 124
  846. [12338.623060] drivers/usb/class/usblp.c: usblp0: removed
  847. [12339.249325] usb 1-2: USB disconnect, address 121
  848. [12339.254460] eth0: unregister 'cdc_ether' usb-0000:00:02.2-2, CDC Ethernet Device
  849. [12387.020714] usb 1-1: new full speed USB device using ohci_hcd and address 125
  850. [12387.230646] usb 1-1: configuration #1 chosen from 1 choice
  851. [12387.233597] hub 1-1:1.0: USB hub found
  852. [12387.236532] hub 1-1:1.0: 4 ports detected
  853. [12387.660476] usb 1-2: new full speed USB device using ohci_hcd and address 126
  854. [12387.882265] usb 1-2: configuration #2 chosen from 2 choices
  855. [12387.894241] eth0: register 'cdc_ether' at usb-0000:00:02.2-2, CDC Ethernet Device, 00:11:f5:bf:08:59
  856. [12388.118275] usb 1-1.2: new low speed USB device using ohci_hcd and address 127
  857. [12388.227075] usb 1-1.2: configuration #1 chosen from 1 choice
  858. [12388.242080] input: HID 04d9:0499 as /class/input/input29
  859. [12388.242161] input: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:02.2-1.2
  860. [12388.457800] usb 1-1.4: new full speed USB device using ohci_hcd and address 2
  861. [12388.571884] usb 1-1.4: configuration #1 chosen from 1 choice
  862. [12388.580822] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7604
  863. [12403.990466] eth0: no IPv6 routers present
  864. [12446.912373] usb 1-1: USB disconnect, address 125
  865. [12446.912380] usb 1-1.2: USB disconnect, address 127
  866. [12446.915954] usb 1-1.4: USB disconnect, address 2
  867. [12446.916009] drivers/usb/class/usblp.c: usblp0: removed
  868. [12447.450831] usb 1-2: USB disconnect, address 126
  869. [12447.458546] eth0: unregister 'cdc_ether' usb-0000:00:02.2-2, CDC Ethernet Device
  870. [12447.934241] usb 1-2: new full speed USB device using ohci_hcd and address 3
  871. [12448.155495] usb 1-2: configuration #2 chosen from 2 choices
  872. [12448.167484] eth0: register 'cdc_ether' at usb-0000:00:02.2-2, CDC Ethernet Device, 00:11:f5:bf:08:59
  873. [12448.474053] usb 1-1: new full speed USB device using ohci_hcd and address 4
  874. [12448.683203] usb 1-1: configuration #1 chosen from 1 choice
  875. [12448.686151] hub 1-1:1.0: USB hub found
  876. [12448.689075] hub 1-1:1.0: 4 ports detected
  877. [12449.026862] usb 1-1.2: new low speed USB device using ohci_hcd and address 5
  878. [12449.136933] usb 1-1.2: configuration #1 chosen from 1 choice
  879. [12449.151941] input: HID 04d9:0499 as /class/input/input30
  880. [12449.152024] input: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:02.2-1.2
  881. [12449.367680] usb 1-1.4: new full speed USB device using ohci_hcd and address 6
  882. [12449.481756] usb 1-1.4: configuration #1 chosen from 1 choice
  883. [12449.490667] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 6 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7604
  884. [12465.711660] eth0: no IPv6 routers present
  885. [15588.546206] usb 1-1: USB disconnect, address 4
  886. [15588.546214] usb 1-1.2: USB disconnect, address 5
  887. [15588.547960] usb 1-1.4: USB disconnect, address 6
  888. [15588.548018] drivers/usb/class/usblp.c: usblp0: removed
  889. [15588.951408] usb 1-1: new full speed USB device using ohci_hcd and address 7
  890. [15589.161089] usb 1-1: configuration #1 chosen from 1 choice
  891. [15589.163957] hub 1-1:1.0: USB hub found
  892. [15589.166895] hub 1-1:1.0: 4 ports detected
  893. [15589.504681] usb 1-1.2: new low speed USB device using ohci_hcd and address 8
  894. [15589.613740] usb 1-1.2: configuration #1 chosen from 1 choice
  895. [15589.628766] input: HID 04d9:0499 as /class/input/input31
  896. [15589.628854] input: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:02.2-1.2
  897. [15589.844520] usb 1-1.4: new full speed USB device using ohci_hcd and address 9
  898. [15589.958551] usb 1-1.4: configuration #1 chosen from 1 choice
  899. [15589.967497] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 9 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7604
  900. [17501.274430] usb 1-1: USB disconnect, address 7
  901. [17501.274437] usb 1-1.2: USB disconnect, address 8
  902. [17501.278294] usb 1-1.4: USB disconnect, address 9
  903. [17501.278351] drivers/usb/class/usblp.c: usblp0: removed
  904. [17502.056134] usb 1-2: USB disconnect, address 3
  905. [17502.061696] eth0: unregister 'cdc_ether' usb-0000:00:02.2-2, CDC Ethernet Device
  906. [17502.809334] usb 1-2: new full speed USB device using ohci_hcd and address 10
  907. [17503.030538] usb 1-2: configuration #2 chosen from 2 choices
  908. [17503.042528] eth0: register 'cdc_ether' at usb-0000:00:02.2-2, CDC Ethernet Device, 00:11:f5:bf:08:59
  909. [17503.349132] usb 1-1: new full speed USB device using ohci_hcd and address 11
  910. [17503.558232] usb 1-1: configuration #1 chosen from 1 choice
  911. [17503.561182] hub 1-1:1.0: USB hub found
  912. [17503.564121] hub 1-1:1.0: 4 ports detected
  913. [17503.902910] usb 1-1.2: new low speed USB device using ohci_hcd and address 12
  914. [17504.011970] usb 1-1.2: configuration #1 chosen from 1 choice
  915. [17504.026999] input: HID 04d9:0499 as /class/input/input32
  916. [17504.027084] input: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:02.2-1.2
  917. [17504.242721] usb 1-1.4: new full speed USB device using ohci_hcd and address 13
  918. [17504.356779] usb 1-1.4: configuration #1 chosen from 1 choice
  919. [17504.365733] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 13 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7604
  920. [17518.611501] eth0: no IPv6 routers present
  921. [18159.764798] usb 1-1.1: new full speed USB device using ohci_hcd and address 14
  922. [18159.900926] usb 1-1.1: rejected 1 configuration due to insufficient available bus power
  923. [18159.900933] usb 1-1.1: no configuration chosen from 1 choice
  924. [18163.475599] usb 1-1.3: new full speed USB device using ohci_hcd and address 15
  925. [18167.400418] usb 1-1.3: configuration #1 chosen from 1 choice
  926. [18169.613456] Bluetooth: HCI USB driver ver 2.9
  927. [18169.755886] hci_usb: probe of 1-1.3:1.0 failed with error -62
  928. [18169.761864] usb 1-1.3: USB disconnect, address 15
  929. [18169.836934] usb 1-1.3: new full speed USB device using ohci_hcd and address 16
  930. [18169.954920] usb 1-1.3: configuration #1 chosen from 1 choice
  931. [18169.961998] usbcore: registered new interface driver hci_usb
  932. [20956.624237] usb 1-1: USB disconnect, address 11
  933. [20956.624244] usb 1-1.1: USB disconnect, address 14
  934. [20956.628149] usb 1-1.2: USB disconnect, address 12
  935. [20956.641758] usb 1-1.3: USB disconnect, address 16
  936. [20956.901184] usb 1-1.4: USB disconnect, address 13
  937. [20956.901249] drivers/usb/class/usblp.c: usblp0: removed
  938. [20957.361002] usb 1-2: USB disconnect, address 10
  939. [20957.366922] eth0: unregister 'cdc_ether' usb-0000:00:02.2-2, CDC Ethernet Device
  940. [20959.709978] usb 1-2: new full speed USB device using ohci_hcd and address 18
  941. [20959.931605] usb 1-2: configuration #2 chosen from 2 choices
  942. [20959.943573] eth0: register 'cdc_ether' at usb-0000:00:02.2-2, CDC Ethernet Device, 00:11:f5:bf:08:59
  943. [20960.249789] usb 1-1: new full speed USB device using ohci_hcd and address 19
  944. [20960.459294] usb 1-1: configuration #1 chosen from 1 choice
  945. [20960.462267] hub 1-1:1.0: USB hub found
  946. [20960.465261] hub 1-1:1.0: 4 ports detected
  947. [20960.798967] usb 1-1.1: new full speed USB device using ohci_hcd and address 20
  948. [20960.935021] usb 1-1.1: configuration #1 chosen from 1 choice
  949. [20961.150758] usb 1-1.2: new low speed USB device using ohci_hcd and address 21
  950. [20961.259827] usb 1-1.2: configuration #1 chosen from 1 choice
  951. [20961.274893] input: HID 04d9:0499 as /class/input/input33
  952. [20961.274976] input: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:02.2-1.2
  953. [20961.486566] usb 1-1.3: new full speed USB device using ohci_hcd and address 22
  954. [20961.566513] usb 1-1.3: device descriptor read/64, error -62
  955. [20961.770389] usb 1-1.3: device descriptor read/all, error -62
  956. [20961.846345] usb 1-1.3: new full speed USB device using ohci_hcd and address 23
  957. [20961.999429] usb 1-1.3: configuration #1 chosen from 1 choice
  958. [20962.218139] usb 1-1.4: new full speed USB device using ohci_hcd and address 24
  959. [20962.332196] usb 1-1.4: configuration #1 chosen from 1 choice
  960. [20962.341109] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 24 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7604
  961. [20995.932590] eth0: no IPv6 routers present
  962. [21350.837295] usb 1-1: USB disconnect, address 19
  963. [21350.837302] usb 1-1.1: USB disconnect, address 20
  964. [21350.842091] usb 1-1.2: USB disconnect, address 21
  965. [21350.856670] usb 1-1.3: USB disconnect, address 23
  966. [21351.105930] usb 1-1.4: USB disconnect, address 24
  967. [21351.105995] drivers/usb/class/usblp.c: usblp0: removed
  968. [21351.484550] usb 1-2: USB disconnect, address 18
  969. [21351.489580] eth0: unregister 'cdc_ether' usb-0000:00:02.2-2, CDC Ethernet Device
  970. [21351.841314] usb 1-2: new full speed USB device using ohci_hcd and address 25
  971. [21352.062959] usb 1-2: configuration #2 chosen from 2 choices
  972. [21352.074939] eth0: register 'cdc_ether' at usb-0000:00:02.2-2, CDC Ethernet Device, 00:11:f5:bf:08:59
  973. [21352.381111] usb 1-1: new full speed USB device using ohci_hcd and address 26
  974. [21352.590648] usb 1-1: configuration #1 chosen from 1 choice
  975. [21352.593714] hub 1-1:1.0: USB hub found
  976. [21352.596528] hub 1-1:1.0: 4 ports detected
  977. [21352.930322] usb 1-1.1: new full speed USB device using ohci_hcd and address 27
  978. [21353.010272] usb 1-1.1: device descriptor read/64, error -62
  979. [21353.194168] usb 1-1.1: device descriptor read/64, error -62
  980. [21353.374058] usb 1-1.1: new full speed USB device using ohci_hcd and address 28
  981. [21353.454006] usb 1-1.1: device descriptor read/64, error -62
  982. [21353.637906] usb 1-1.1: device descriptor read/64, error -62
  983. [21353.817803] usb 1-1.1: new full speed USB device using ohci_hcd and address 29
  984. [21354.224409] usb 1-1.1: device not accepting address 29, error -62
  985. [21354.301509] usb 1-1.1: new full speed USB device using ohci_hcd and address 30
  986. [21354.708231] usb 1-1.1: device not accepting address 30, error -62
  987. [21354.930134] usb 1-1.2: new low speed USB device using ohci_hcd and address 31
  988. [21355.039204] usb 1-1.2: configuration #1 chosen from 1 choice
  989. [21355.054219] input: HID 04d9:0499 as /class/input/input34
  990. [21355.054306] input: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:02.2-1.2
  991. [21355.265949] usb 1-1.3: new full speed USB device using ohci_hcd and address 32
  992. [21355.828742] usb 1-1.3: configuration #1 chosen from 1 choice
  993. [21356.045512] usb 1-1.4: new full speed USB device using ohci_hcd and address 33
  994. [21356.159568] usb 1-1.4: configuration #1 chosen from 1 choice
  995. [21356.168486] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 33 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7604
  996. [21370.654351] eth0: no IPv6 routers present
  997.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!