ronald

============ start debug info ============
libhd version 15.3 (ia32)
using /var/lib/hardware
kernel version is 2.6
----- /proc/cmdline -----
  root=UUID=c5c0fe2a-9cf7-4c13-b9f0-fa6ed6e4264d ro quiet splash
----- /proc/cmdline end -----
debug = 0xff7ffff7
probe = 0x0000138fc4aa17fcf9fffe (+memory +pci +isapnp +net +floppy +misc +misc.serial +misc.par +misc.floppy +serial +cpu +bios +monitor +mouse +scsi +usb -usb.mods +modem +modem.usb +parallel +parallel.lp +parallel.zip -isa -isa.isdn +isdn +kbd +prom +sbus +int +braille +braille.alva +braille.fhp +braille.ht -ignx11 +sys -bios.vbe -isapnp.old -isapnp.new -isapnp.mod +braille.baum -manual +fb +pppoe -scan +pcmcia -fork -parallel.imm +s390 -cpuemu -sysfs -s390disks +udev +block +block.cdrom +block.part +edd +edd.mod -bios.ddc -bios.fb -bios.mode +input +block.mods +bios.vesa -cpuemu.debug -scsi.noserial +wlan -bios.crc -hal -bios.vram -bios.acpi -bios.ddc.ports=1 -bios.ddc.ports=2 -bios.ddc.ports=3 -bios.ddc.ports=4 -modules.pata -max -lxrc)
shm: attached segment 1114140 at 0xb7985000
>> hal.1: read hal data
  hal: connected to: :1.67
----- hal device list -----
  0: udi = '/org/freedesktop/Hal/devices/leds_b43_phy0_tx'
  info.addons.singleton = { 'hald-addon-leds' }
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:01:09.0/ssb0:0/leds/b43-phy0::tx'
  info.parent = '/org/freedesktop/Hal/devices/ssb__null_'
  info.subsystem = 'leds'
  info.udi = '/org/freedesktop/Hal/devices/leds_b43_phy0_tx'
  leds.device_name = 'b43-phy0'
  leds.function = 'tx'
  info.interfaces = { 'org.freedesktop.Hal.Device.Leds' }
  info.category = 'leds'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'leds'
  info.capabilities = { 'leds' }

  1: udi = '/org/freedesktop/Hal/devices/leds_b43_phy0_radio'
  info.addons.singleton = { 'hald-addon-leds' }
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:01:09.0/ssb0:0/leds/b43-phy0::radio'
  info.parent = '/org/freedesktop/Hal/devices/ssb__null_'
  info.subsystem = 'leds'
  info.udi = '/org/freedesktop/Hal/devices/leds_b43_phy0_radio'
  leds.device_name = 'b43-phy0'
  leds.function = 'radio'
  info.interfaces = { 'org.freedesktop.Hal.Device.Leds' }
  info.category = 'leds'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'leds'
  info.capabilities = { 'leds' }

  2: udi = '/org/freedesktop/Hal/devices/leds_b43_phy0_rx'
  info.addons.singleton = { 'hald-addon-leds' }
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:01:09.0/ssb0:0/leds/b43-phy0::rx'
  info.parent = '/org/freedesktop/Hal/devices/ssb__null_'
  info.subsystem = 'leds'
  info.udi = '/org/freedesktop/Hal/devices/leds_b43_phy0_rx'
  leds.device_name = 'b43-phy0'
  leds.function = 'rx'
  info.interfaces = { 'org.freedesktop.Hal.Device.Leds' }
  info.category = 'leds'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'leds'
  info.capabilities = { 'leds' }

  3: udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_5'
  input.device = '/dev/input/event10'
  input.product = 'b43-phy0'
  button.has_state = false
  info.addons.singleton = { 'hald-addon-input' }
  linux.sysfs_path = '/sys/devices/virtual/input/input10/event10'
  info.parent = '/org/freedesktop/Hal/devices/computer'
  info.subsystem = 'input'
  info.product = 'b43-phy0'
  info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_5'
  info.category = 'input'
  linux.device_file = '/dev/input/event10'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'input'
  info.capabilities = { 'input', 'button' }

  4: udi = '/org/freedesktop/Hal/devices/ssb__null__rfkill_b43_phy0_wlan'
  info.interfaces = { 'org.freedesktop.Hal.Device.KillSwitch' }
  info.addons.singleton = { 'hald-addon-rfkill-killswitch' }
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:01:09.0/ssb0:0/rfkill/rfkill0'
  info.parent = '/org/freedesktop/Hal/devices/ssb__null_'
  killswitch.type = 'wlan'
  killswitch.access_method = 'rfkill'
  killswitch.name = 'b43-phy0'
  killswitch.state = 1 (0x1)
  info.product = 'b43-phy0 wlan Killswitch'
  info.udi = '/org/freedesktop/Hal/devices/ssb__null__rfkill_b43_phy0_wlan'
  info.subsystem = 'rfkill'
  info.category = 'killswitch'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'rfkill'
  info.capabilities = { 'killswitch' }

  5: udi = '/org/freedesktop/Hal/devices/net_0e_f9_c4_90_f2_ee'
  net.originating_device = '/org/freedesktop/Hal/devices/computer'
  linux.sysfs_path = '/sys/devices/virtual/net/pan0'
  net.address = '0e:f9:c4:90:f2:ee'
  info.parent = '/org/freedesktop/Hal/devices/computer'
  net.linux.ifindex = 6 (0x6)
  net.arp_proto_hw_id = 1 (0x1)
  info.subsystem = 'net'
  net.interface = 'pan0'
  net.bridge.mac_address = 16465907479278ull (0xef9c490f2eeull)
  info.product = 'Bridge Interface'
  info.udi = '/org/freedesktop/Hal/devices/net_0e_f9_c4_90_f2_ee'
  info.category = 'net.bridge'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'net'
  info.capabilities = { 'net', 'net.bridge' }

  6: udi = '/org/freedesktop/Hal/devices/computer'
  info.callouts.session_remove = { 'hal-acl-tool --reconfigure' }
  info.callouts.session_active = { 'hal-acl-tool --reconfigure' }
  info.callouts.add = { 'hal-acl-tool --remove-all', 'hal-storage-cleanup-all-mountpoints' }
  info.subsystem = 'unknown'
  info.product = 'Computer'
  info.udi = '/org/freedesktop/Hal/devices/computer'
  system.kernel.name = 'Linux'
  system.kernel.version = '2.6.28-16-generic'
  system.kernel.version.major = 2 (0x2)
  system.kernel.version.minor = 6 (0x6)
  system.kernel.version.micro = 28 (0x1c)
  system.kernel.machine = 'i686'
  power_management.can_suspend = true
  power_management.can_suspend_hybrid = false
  power_management.can_hibernate = true
  power_management.type = 'acpi'
  system.hardware.primary_video.vendor = 32902 (0x8086)
  system.hardware.primary_video.product = 13698 (0x3582)
  system.hardware.serial = '1101121163'
  system.board.serial = '0123456789012345'
  system.firmware.vendor = 'AMI'
  system.firmware.version = 'NOTE BIOS Version /52.00.12'
  system.firmware.release_date = '07/19/2004'
  system.hardware.vendor = 'Gateway'
  system.hardware.product = 'Gateway M520'
  system.hardware.version = '52.00.12'
  system.chassis.manufacturer = 'Gateway'
  system.board.product = 'Gateway M520'
  system.board.version = 'KBC K52.00.06'
  system.board.vendor = 'Gateway'
  system.chassis.type = 'Notebook'
  system.formfactor = 'laptop'
  power_management.quirk.vbe_post = true
  system.hardware.uuid = ''
  power_management.quirk.vbestate_restore = true
  power_management.quirk.vbemode_restore = true
  power_management.quirk.dpms_suspend = true
  power_management.acpi.linux.version = '20080926'
  info.addons = { 'hald-addon-cpufreq', 'hald-addon-acpi' }
  power_management.quirk.dpms_on = true
  info.interfaces = { 'org.freedesktop.Hal.Device.SystemPowerManagement' }
  org.freedesktop.Hal.Device.SystemPowerManagement.method_argnames = { 'num_seconds_to_sleep', 'num_seconds_to_sleep', '', '', '', 'enable_power_save' }
  org.freedesktop.Hal.Device.SystemPowerManagement.method_execpaths = { 'hal-system-power-suspend', 'hal-system-power-suspend-hybrid', 'hal-system-power-hibernate', 'hal-system-power-shutdown', 'hal-system-power-reboot', 'hal-system-power-set-power-save' }
  power_management.quirk.vga_mode_3 = true
  info.callouts.session_add = { 'hal-acl-tool --reconfigure' }
  org.freedesktop.Hal.Device.SystemPowerManagement.method_names = { 'Suspend', 'SuspendHybrid', 'Hibernate', 'Shutdown', 'Reboot', 'SetPowerSave' }
  org.freedesktop.Hal.Device.SystemPowerManagement.method_signatures = { 'i', 'i', '', '', '', 'b' }
  info.callouts.session_inactive = { 'hal-acl-tool --reconfigure' }
  power_management.is_powersave_set = false

  7: udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_3'
  access_control.file = '/dev/input/event4'
  access_control.type = 'mouse'
  info.callouts.add = { 'hal-acl-tool --add-device' }
  info.callouts.remove = { 'hal-acl-tool --remove-device' }
  input.device = '/dev/input/event4'
  input.product = 'Macintosh mouse button emulation'
  linux.sysfs_path = '/sys/devices/virtual/input/input4/event4'
  info.parent = '/org/freedesktop/Hal/devices/computer'
  info.subsystem = 'input'
  info.product = 'Macintosh mouse button emulation'
  info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_3'
  input.x11_driver = 'evdev'
  info.category = 'input'
  linux.device_file = '/dev/input/event4'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'input'
  info.capabilities = { 'input', 'input.mouse', 'access_control' }

  8: udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer'
  access_control.file = '/dev/seq'
  access_control.type = 'sound'
  info.callouts.add = { 'hal-acl-tool --add-device' }
  info.callouts.remove = { 'hal-acl-tool --remove-device' }
  linux.sysfs_path = '/sys/devices/virtual/sound/seq'
  info.parent = '/org/freedesktop/Hal/devices/computer'
  info.subsystem = 'sound'
  info.product = 'ALSA Sequencer Device'
  info.udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer'
  alsa.type = 'sequencer'
  alsa.device_file = '/dev/seq'
  info.category = 'alsa'
  linux.device_file = '/dev/seq'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'sound'
  info.capabilities = { 'alsa', 'access_control' }

  9: udi = '/org/freedesktop/Hal/devices/pci_8086_3582_drm_i915_card0_0'
  access_control.file = '/dev/dri/card0'
  access_control.type = 'video'
  info.callouts.add = { 'hal-acl-tool --add-device' }
  info.callouts.remove = { 'hal-acl-tool --remove-device' }
  drm.dri_library = 'i915'
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/drm/card0'
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_3582'
  info.subsystem = 'drm'
  info.product = 'Direct Rendering Manager Device'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_3582_drm_i915_card0_0'
  info.category = 'drm'
  linux.device_file = '/dev/dri/card0'
  info.vendor = 'Intel Corporation'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'drm'
  info.capabilities = { 'drm', 'access_control' }

  10: udi = '/org/freedesktop/Hal/devices/pci_8086_24ca_scsi_host_0_scsi_device_lun0_scsi_generic'
  access_control.file = '/dev/sg1'
  access_control.type = 'cdrom'
  info.callouts.add = { 'hal-acl-tool --add-device' }
  info.callouts.remove = { 'hal-acl-tool --remove-device' }
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/host1/target1:0:0/1:0:0:0/scsi_generic/sg1'
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_24ca_scsi_host_0_scsi_device_lun0'
  info.subsystem = 'scsi_generic'
  scsi_generic.device = '/dev/sg1'
  info.product = 'SCSI Generic Interface'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_24ca_scsi_host_0_scsi_device_lun0_scsi_generic'
  info.category = 'scsi_generic'
  linux.device_file = '/dev/sg1'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'scsi_generic'
  info.capabilities = { 'scsi_generic', 'access_control' }

  11: udi = '/org/freedesktop/Hal/devices/storage_model_COMBO_LSC_24082K'
  storage.lun = 0 (0x0)
  storage.originating_device = '/org/freedesktop/Hal/devices/computer'
  storage.removable.media_available = false
  storage.removable = true
  storage.size = 0ull (0x0ull)
  storage.hotpluggable = false
  storage.requires_eject = true
  access_control.type = 'cdrom'
  storage.removable.support_async_notification = false
  info.callouts.remove = { 'hal-acl-tool --remove-device' }
  info.vendor = 'Slimtype'
  info.callouts.add = { 'hal-acl-tool --add-device' }
  linux.hotplug_type = 3 (0x3)
  info.addons = { 'hald-addon-storage' }
  storage.partitioning_scheme = ''
  storage.cdrom.cdr = true
  storage.cdrom.cdrw = true
  storage.cdrom.dvd = true
  storage.cdrom.dvdr = false
  storage.cdrom.dvdrw = false
  storage.cdrom.dvdrdl = false
  storage.cdrom.dvdram = false
  storage.cdrom.dvdplusr = false
  storage.cdrom.dvdplusrw = false
  storage.cdrom.dvdplusrwdl = false
  storage.cdrom.dvdplusrdl = false
  storage.cdrom.bd = false
  storage.cdrom.bdr = false
  storage.cdrom.bdre = false
  storage.cdrom.hddvd = false
  storage.cdrom.hddvdr = false
  storage.cdrom.hddvdrw = false
  storage.cdrom.mo = false
  storage.cdrom.mrw = true
  storage.cdrom.mrw_w = true
  storage.cdrom.support_media_changed = true
  storage.cdrom.support_multisession = true
  storage.cdrom.read_speed = 4234 (0x108a)
  storage.cdrom.write_speed = 0 (0x0)
  storage.cdrom.write_speeds = {  }
  block.storage_device = '/org/freedesktop/Hal/devices/storage_model_COMBO_LSC_24082K'
  info.category = 'storage'
  info.product = 'COMBO LSC-24082K'
  info.udi = '/org/freedesktop/Hal/devices/storage_model_COMBO_LSC_24082K'
  org.freedesktop.Hal.Device.Storage.method_names = { 'Eject', 'CloseTray' }
  org.freedesktop.Hal.Device.Storage.method_signatures = { 'as', 'as' }
  org.freedesktop.Hal.Device.Storage.method_argnames = { 'extra_options', 'extra_options' }
  org.freedesktop.Hal.Device.Storage.method_execpaths = { 'hal-storage-eject', 'hal-storage-closetray' }
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/host1/target1:0:0/1:0:0:0/block/sr0'
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_24ca_scsi_host_0_scsi_device_lun0'
  info.interfaces = { 'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage.Removable' }
  block.device = '/dev/sr0'
  block.major = 11 (0xb)
  block.minor = 0 (0x0)
  block.is_volume = false
  storage.bus = 'pci'
  storage.no_partitions_hint = true
  storage.media_check_enabled = true
  storage.automount_enabled_hint = true
  storage.drive_type = 'cdrom'
  info.capabilities = { 'storage', 'block', 'storage.cdrom', 'access_control' }
  storage.model = 'COMBO LSC-24082K'
  storage.vendor = 'Slimtype'
  storage.firmware_version = 'JBK2'
  access_control.file = '/dev/sr0'

  12: udi = '/org/freedesktop/Hal/devices/volume_part2_size_1024'
  block.is_volume = true
  info.capabilities = { 'volume', 'block' }
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST94811A_3KW662RS'
  volume.fstype = ''
  volume.fsusage = 'partitiontable'
  volume.fsversion = ''
  volume.uuid = ''
  volume.label = ''
  volume.mount_point = ''
  info.product = 'Volume'
  volume.is_mounted = false
  volume.is_mounted_read_only = false
  volume.linux.is_device_mapper = false
  volume.is_partition = true
  volume.partition.number = 2 (0x2)
  volume.block_size = 512 (0x200)
  volume.num_blocks = 2ull (0x2ull)
  volume.size = 1024ull (0x400ull)
  volume.partition.start = 38576563200ull (0x8fb57a400ull)
  volume.partition.media_size = 40007761920ull (0x950a60000ull)
  volume.is_disc = false
  info.udi = '/org/freedesktop/Hal/devices/volume_part2_size_1024'
  volume.partition.scheme = 'mbr'
  volume.partition.type = '0x05'
  volume.partition.label = ''
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0/block/sda/sda2'
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST94811A_3KW662RS'
  volume.partition.flags = {  }
  volume.partition.uuid = ''
  info.category = 'volume'
  block.device = '/dev/sda2'
  block.major = 8 (0x8)
  block.minor = 2 (0x2)
  linux.hotplug_type = 3 (0x3)

  13: udi = '/org/freedesktop/Hal/devices/kvm'
  access_control.file = '/dev/kvm'
  access_control.type = 'virt-hardware'
  info.callouts.add = { 'hal-acl-tool --add-device' }
  info.callouts.remove = { 'hal-acl-tool --remove-device' }
  info.parent = '/org/freedesktop/Hal/devices/fuse'
  info.subsystem = 'unknown'
  info.udi = '/org/freedesktop/Hal/devices/kvm'
  info.capabilities = { 'access_control' }

  14: udi = '/org/freedesktop/Hal/devices/computer_alsa_timer'
  access_control.file = '/dev/timer'
  access_control.type = 'sound'
  info.callouts.add = { 'hal-acl-tool --add-device' }
  info.callouts.remove = { 'hal-acl-tool --remove-device' }
  linux.sysfs_path = '/sys/devices/virtual/sound/timer'
  info.parent = '/org/freedesktop/Hal/devices/computer'
  info.subsystem = 'sound'
  info.product = 'ALSA Timer Device'
  info.udi = '/org/freedesktop/Hal/devices/computer_alsa_timer'
  alsa.type = 'timer'
  alsa.device_file = '/dev/timer'
  info.category = 'alsa'
  linux.device_file = '/dev/timer'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'sound'
  info.capabilities = { 'alsa', 'access_control' }

  15: udi = '/org/freedesktop/Hal/devices/volume_uuid_3ec16031_4690_44e5_a592_b64fad5511a5'
  volume.is_partition = true
  info.capabilities = { 'volume', 'block' }
  volume.block_size = 512 (0x200)
  volume.num_blocks = 2795247ull (0x2aa6efull)
  volume.size = 1431166464ull (0x554dde00ull)
  volume.partition.start = 38576595456ull (0x8fb582200ull)
  volume.partition.media_size = 40007761920ull (0x950a60000ull)
  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_3ec16031_4690_44e5_a592_b64fad5511a5'
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST94811A_3KW662RS'
  volume.fstype = 'swap'
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0/block/sda/sda5'
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST94811A_3KW662RS'
  volume.fsversion = '2'
  volume.fsusage = 'other'
  volume.label = ''
  volume.uuid = '3ec16031-4690-44e5-a592-b64fad5511a5'
  info.product = 'Volume (swap)'
  volume.mount_point = ''
  volume.is_mounted = false
  volume.is_mounted_read_only = false
  volume.linux.is_device_mapper = false
  block.device = '/dev/sda5'
  block.major = 8 (0x8)
  block.minor = 5 (0x5)
  block.is_volume = true
  linux.hotplug_type = 3 (0x3)
  volume.partition.number = 5 (0x5)
  info.category = 'volume'
  volume.is_disc = false

  16: udi = '/org/freedesktop/Hal/devices/volume_uuid_c5c0fe2a_9cf7_4c13_b9f0_fa6ed6e4264d'
  block.is_volume = true
  info.capabilities = { 'volume', 'block' }
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST94811A_3KW662RS'
  volume.fstype = 'ext3'
  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_c5c0fe2a_9cf7_4c13_b9f0_fa6ed6e4264d'
  volume.fsversion = '1.0'
  volume.uuid = 'c5c0fe2a-9cf7-4c13-b9f0-fa6ed6e4264d'
  volume.fsusage = 'filesystem'
  volume.label = ''
  info.product = 'Volume (ext3)'
  volume.is_mounted = true
  volume.mount_point = '/'
  volume.linux.is_device_mapper = false
  volume.is_partition = true
  volume.partition.number = 1 (0x1)
  volume.block_size = 512 (0x200)
  volume.num_blocks = 75344787ull (0x47dab93ull)
  volume.size = 38576530944ull (0x8fb572600ull)
  volume.partition.start = 32256ull (0x7e00ull)
  volume.partition.media_size = 40007761920ull (0x950a60000ull)
  volume.is_mounted_read_only = false
  volume.is_disc = false
  volume.ignore = false
  org.freedesktop.Hal.Device.Volume.method_names = { 'Mount', 'Unmount', 'Eject' }
  org.freedesktop.Hal.Device.Volume.method_signatures = { 'ssas', 'as', 'as' }
  org.freedesktop.Hal.Device.Volume.method_argnames = { 'mount_point fstype extra_options', 'extra_options', 'extra_options' }
  org.freedesktop.Hal.Device.Volume.method_execpaths = { 'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject' }
  volume.mount.valid_options = { 'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data=' }
  volume.unmount.valid_options = { 'lazy' }
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0/block/sda/sda1'
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST94811A_3KW662RS'
  info.interfaces = { 'org.freedesktop.Hal.Device.Volume' }
  info.category = 'volume'
  block.device = '/dev/sda1'
  block.major = 8 (0x8)
  block.minor = 1 (0x1)
  linux.hotplug_type = 3 (0x3)

  17: udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0'
  access_control.file = '/dev/sequencer2'
  access_control.type = 'sound'
  info.callouts.add = { 'hal-acl-tool --add-device' }
  info.callouts.remove = { 'hal-acl-tool --remove-device' }
  linux.sysfs_path = '/sys/devices/virtual/sound/sequencer2'
  info.parent = '/org/freedesktop/Hal/devices/computer'
  info.subsystem = 'sound'
  info.product = 'OSS Sequencer Device'
  info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0'
  oss.type = 'sequencer'
  oss.device_file = '/dev/sequencer2'
  info.category = 'oss'
  linux.device_file = '/dev/sequencer2'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'sound'
  info.capabilities = { 'oss', 'access_control' }

  18: udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer'
  access_control.file = '/dev/sequencer'
  access_control.type = 'sound'
  info.callouts.add = { 'hal-acl-tool --add-device' }
  info.callouts.remove = { 'hal-acl-tool --remove-device' }
  linux.sysfs_path = '/sys/devices/virtual/sound/sequencer'
  info.parent = '/org/freedesktop/Hal/devices/computer'
  info.subsystem = 'sound'
  info.product = 'OSS Sequencer Device'
  info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer'
  oss.type = 'sequencer'
  oss.device_file = '/dev/sequencer'
  info.category = 'oss'
  linux.device_file = '/dev/sequencer'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'sound'
  info.capabilities = { 'oss', 'access_control' }

  19: udi = '/org/freedesktop/Hal/devices/usb_device_4d9_499_noserial_if0_logicaldev_input'
  access_control.file = '/dev/input/event9'
  access_control.type = 'mouse'
  info.callouts.add = { 'hal-acl-tool --add-device' }
  info.callouts.remove = { 'hal-acl-tool --remove-device' }
  input.device = '/dev/input/event9'
  input.product = 'HID 04d9:0499'
  input.originating_device = '/org/freedesktop/Hal/devices/usb_device_4d9_499_noserial_if0'
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input9/event9'
  info.parent = '/org/freedesktop/Hal/devices/usb_device_4d9_499_noserial_if0'
  info.subsystem = 'input'
  info.product = 'HID 04d9:0499'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_4d9_499_noserial_if0_logicaldev_input'
  input.x11_driver = 'evdev'
  info.category = 'input'
  linux.device_file = '/dev/input/event9'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'input'
  info.capabilities = { 'input', 'input.mouse', 'access_control' }

  20: udi = '/org/freedesktop/Hal/devices/pci_8086_3582_drm_i915_card0'
  access_control.file = ''
  access_control.type = 'video'
  info.callouts.add = { 'hal-acl-tool --add-device' }
  info.callouts.remove = { 'hal-acl-tool --remove-device' }
  drm.dri_library = 'i915'
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/drm/card0'
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_3582'
  info.subsystem = 'drm'
  info.product = 'Direct Rendering Manager Device'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_3582_drm_i915_card0'
  info.category = 'drm'
  linux.device_file = ''
  info.vendor = 'Intel Corporation'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'drm'
  info.capabilities = { 'drm', 'access_control' }

  21: udi = '/org/freedesktop/Hal/devices/fuse'
  access_control.file = '/dev/fuse'
  access_control.type = 'camera'
  info.callouts.add = { 'hal-acl-tool --add-device' }
  info.callouts.remove = { 'hal-acl-tool --remove-device' }
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_3580'
  info.subsystem = 'unknown'
  info.udi = '/org/freedesktop/Hal/devices/fuse'
  info.capabilities = { 'access_control' }

  22: udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input'
  info.callouts.add = { 'debian-setup-keyboard' }
  input.device = '/dev/input/event5'
  input.product = 'AT Translated Set 2 keyboard'
  info.addons.singleton = { 'hald-addon-input' }
  input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port'
  input.xkb.rules = 'evdev'
  linux.sysfs_path = '/sys/devices/platform/i8042/serio0/input/input5/event5'
  info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port'
  info.subsystem = 'input'
  info.product = 'AT Translated Set 2 keyboard'
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input'
  input.xkb.model = 'pc105'
  input.xkb.layout = 'us'
  input.x11_driver = 'evdev'
  info.category = 'input'
  linux.device_file = '/dev/input/event5'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'input'
  info.capabilities = { 'input', 'input.keyboard', 'input.keypad', 'input.keys', 'button' }

  23: udi = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST94811A_3KW662RS'
  block.is_volume = false
  info.capabilities = { 'storage', 'block' }
  storage.bus = 'pci'
  storage.no_partitions_hint = false
  storage.automount_enabled_hint = false
  storage.drive_type = 'disk'
  storage.model = 'ST94811A'
  storage.vendor = 'ATA'
  storage.serial = 'SATA_ST94811A_3KW662RS'
  storage.firmware_version = '3.05'
  storage.lun = 0 (0x0)
  storage.originating_device = '/org/freedesktop/Hal/devices/computer'
  storage.removable.media_available = true
  storage.removable = false
  storage.size = 40007761920ull (0x950a60000ull)
  storage.hotpluggable = false
  storage.requires_eject = false
  info.product = 'ST94811A'
  info.udi = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST94811A_3KW662RS'
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST94811A_3KW662RS'
  storage.media_check_enabled = false
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0/block/sda'
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_24ca_scsi_host_scsi_device_lun0'
  storage.removable.media_size = 40007761920ull (0x950a60000ull)
  storage.partitioning_scheme = 'mbr'
  info.category = 'storage'
  info.vendor = 'ATA'
  block.device = '/dev/sda'
  block.major = 8 (0x8)
  block.minor = 0 (0x0)
  linux.hotplug_type = 3 (0x3)

  24: udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_4'
  input.device = '/dev/input/event1'
  input.product = 'Lid Switch'
  button.has_state = true
  button.state.value = false
  button.type = 'lid'
  info.addons.singleton = { 'hald-addon-input' }
  linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1/event1'
  info.parent = '/org/freedesktop/Hal/devices/computer'
  info.subsystem = 'input'
  info.product = 'Lid Switch'
  info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_4'
  info.category = 'input'
  linux.device_file = '/dev/input/event1'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'input'
  info.capabilities = { 'input', 'input.switch', 'button' }

  25: udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0'
  info.callouts.add = { 'debian-setup-keyboard' }
  input.device = '/dev/input/event7'
  input.product = 'Video Bus'
  info.addons.singleton = { 'hald-addon-input' }
  input.xkb.rules = 'evdev'
  linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:12/input/input7/event7'
  info.parent = '/org/freedesktop/Hal/devices/computer'
  info.subsystem = 'input'
  info.product = 'Video Bus'
  info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0'
  input.xkb.model = 'pc105'
  input.xkb.layout = 'us'
  input.x11_driver = 'evdev'
  info.category = 'input'
  linux.device_file = '/dev/input/event7'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'input'
  info.capabilities = { 'input', 'input.keys', 'button' }

  26: udi = '/org/freedesktop/Hal/devices/acpi_CPU1'
  linux.acpi_path = '/proc/acpi/processor/CPU1'
  linux.acpi_type = 1 (0x1)
  processor.number = 0 (0x0)
  processor.can_throttle = false
  info.parent = '/org/freedesktop/Hal/devices/computer'
  info.product = 'Mobile Intel(R) Pentium(R) 4 CPU 2.80GHz'
  info.udi = '/org/freedesktop/Hal/devices/acpi_CPU1'
  info.category = 'processor'
  linux.hotplug_type = 4 (0x4)
  info.capabilities = { 'processor' }

  27: udi = '/org/freedesktop/Hal/devices/acpi_CPU2'
  linux.acpi_path = '/proc/acpi/processor/CPU2'
  linux.acpi_type = 1 (0x1)
  processor.number = 1 (0x1)
  processor.can_throttle = false
  info.parent = '/org/freedesktop/Hal/devices/computer'
  info.product = 'Mobile Intel(R) Pentium(R) 4 CPU 2.80GHz'
  info.udi = '/org/freedesktop/Hal/devices/acpi_CPU2'
  info.category = 'processor'
  linux.hotplug_type = 4 (0x4)
  info.capabilities = { 'processor' }

  28: udi = '/org/freedesktop/Hal/devices/net_c2_15_8b_5e_4a_a4'
  net.originating_device = '/org/freedesktop/Hal/devices/computer'
  linux.sysfs_path = '/sys/devices/virtual/net/virbr0'
  net.address = 'c2:15:8b:5e:4a:a4'
  info.parent = '/org/freedesktop/Hal/devices/computer'
  net.linux.ifindex = 5 (0x5)
  net.arp_proto_hw_id = 1 (0x1)
  info.subsystem = 'net'
  net.interface = 'virbr0'
  net.bridge.mac_address = 213397788314276ull (0xc2158b5e4aa4ull)
  info.product = 'Bridge Interface'
  info.udi = '/org/freedesktop/Hal/devices/net_c2_15_8b_5e_4a_a4'
  info.category = 'net.bridge'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'net'
  info.capabilities = { 'net', 'net.bridge' }

  29: udi = '/org/freedesktop/Hal/devices/net_computer_loopback'
  net.originating_device = '/org/freedesktop/Hal/devices/computer'
  linux.sysfs_path = '/sys/devices/virtual/net/lo'
  net.address = '00:00:00:00:00:00'
  info.parent = '/org/freedesktop/Hal/devices/computer'
  net.linux.ifindex = 1 (0x1)
  net.arp_proto_hw_id = 772 (0x304)
  info.subsystem = 'net'
  net.interface = 'lo'
  info.udi = '/org/freedesktop/Hal/devices/net_computer_loopback'
  info.product = 'Loopback device Interface'
  info.category = 'net.loopback'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'net'
  info.capabilities = { 'net', 'net.loopback' }

  30: udi = '/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input'
  input.device = '/dev/input/event6'
  input.product = 'PC Speaker'
  input.originating_device = '/org/freedesktop/Hal/devices/platform_pcspkr'
  linux.sysfs_path = '/sys/devices/platform/pcspkr/input/input6/event6'
  info.parent = '/org/freedesktop/Hal/devices/platform_pcspkr'
  info.subsystem = 'input'
  info.product = 'PC Speaker'
  info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input'
  info.category = 'input'
  linux.device_file = '/dev/input/event6'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'input'
  info.capabilities = { 'input' }

  31: udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input'
  input.device = '/dev/input/event8'
  input.product = 'SynPS/2 Synaptics TouchPad'
  input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port'
  linux.sysfs_path = '/sys/devices/platform/i8042/serio1/input/input8/event8'
  info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port'
  info.subsystem = 'input'
  info.product = 'SynPS/2 Synaptics TouchPad'
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input'
  input.x11_driver = 'synaptics'
  info.category = 'input'
  linux.device_file = '/dev/input/event8'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'input'
  info.capabilities = { 'input', 'input.touchpad' }

  32: udi = '/org/freedesktop/Hal/devices/pci_8086_24ca_scsi_host_0_scsi_host'
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/host1/scsi_host/host1'
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_24ca_scsi_host_0'
  info.subsystem = 'scsi_host'
  info.product = 'SCSI Host Adapter'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_24ca_scsi_host_0_scsi_host'
  scsi_host.host = 1 (0x1)
  info.category = 'scsi_host'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'scsi_host'
  info.capabilities = { 'scsi_host' }

  33: udi = '/org/freedesktop/Hal/devices/pci_8086_24ca_scsi_host_scsi_device_lun0_scsi_generic'
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0/scsi_generic/sg0'
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_24ca_scsi_host_scsi_device_lun0'
  info.subsystem = 'scsi_generic'
  scsi_generic.device = '/dev/sg0'
  info.product = 'SCSI Generic Interface'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_24ca_scsi_host_scsi_device_lun0_scsi_generic'
  info.category = 'scsi_generic'
  linux.device_file = '/dev/sg0'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'scsi_generic'
  info.capabilities = { 'scsi_generic' }

  34: udi = '/org/freedesktop/Hal/devices/pci_8086_24ca_scsi_host_scsi_host'
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/host0/scsi_host/host0'
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_24ca_scsi_host'
  info.subsystem = 'scsi_host'
  info.product = 'SCSI Host Adapter'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_24ca_scsi_host_scsi_host'
  scsi_host.host = 0 (0x0)
  info.category = 'scsi_host'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'scsi_host'
  info.capabilities = { 'scsi_host' }

  35: udi = '/org/freedesktop/Hal/devices/net_00_90_4b_8b_6c_ba_0'
  net.originating_device = '/org/freedesktop/Hal/devices/ssb__null_'
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:01:09.0/ssb0:0/net/wmaster0'
  net.address = '00:90:4b:8b:6c:ba'
  info.parent = '/org/freedesktop/Hal/devices/ssb__null_'
  net.linux.ifindex = 3 (0x3)
  net.arp_proto_hw_id = 801 (0x321)
  info.subsystem = 'net'
  net.interface = 'wmaster0'
  info.udi = '/org/freedesktop/Hal/devices/net_00_90_4b_8b_6c_ba_0'
  info.product = 'Networking Wireless Control Interface'
  info.category = 'net.80211control'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'net'
  info.capabilities = { 'net', 'net.80211control' }

  36: udi = '/org/freedesktop/Hal/devices/net_00_90_4b_8b_6c_ba'
  net.originating_device = '/org/freedesktop/Hal/devices/ssb__null_'
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:01:09.0/ssb0:0/net/wlan0'
  net.address = '00:90:4b:8b:6c:ba'
  info.parent = '/org/freedesktop/Hal/devices/ssb__null_'
  net.linux.ifindex = 4 (0x4)
  net.arp_proto_hw_id = 1 (0x1)
  info.subsystem = 'net'
  net.interface = 'wlan0'
  info.udi = '/org/freedesktop/Hal/devices/net_00_90_4b_8b_6c_ba'
  info.product = 'WLAN Interface'
  net.80211.mac_address = 619742719162ull (0x904b8b6cbaull)
  info.category = 'net.80211'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'net'
  info.capabilities = { 'net', 'net.80211' }

  37: udi = '/org/freedesktop/Hal/devices/net_00_03_25_12_02_e5'
  org.freedesktop.Hal.Device.WakeOnLan.method_execpaths = { 'hal-system-wol-supported', 'hal-system-wol-enabled', 'hal-system-wol-enable' }
  info.interfaces = { 'org.freedesktop.Hal.Device.WakeOnLan' }
  net.originating_device = '/org/freedesktop/Hal/devices/ssb__null_'
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:01:06.0/ssb1:0/net/eth0'
  net.address = '00:03:25:12:02:e5'
  info.parent = '/org/freedesktop/Hal/devices/ssb__null_'
  net.linux.ifindex = 2 (0x2)
  net.arp_proto_hw_id = 1 (0x1)
  net.80203.mac_address = 13506839269ull (0x3251202e5ull)
  net.interface = 'eth0'
  info.udi = '/org/freedesktop/Hal/devices/net_00_03_25_12_02_e5'
  info.subsystem = 'net'
  info.product = 'Networking Interface'
  org.freedesktop.Hal.Device.WakeOnLan.method_signatures = { '', '', 'b' }
  info.category = 'net.80203'
  org.freedesktop.Hal.Device.WakeOnLan.method_names = { 'GetSupported', 'GetEnabled', 'SetEnabled' }
  org.freedesktop.Hal.Device.WakeOnLan.method_argnames = { '', '', 'enable' }
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'net'
  info.capabilities = { 'net', 'net.80203', 'wake_on_lan' }

  38: udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2'
  input.device = '/dev/input/event2'
  input.product = 'Sleep Button (CM)'
  button.has_state = false
  button.type = 'sleep'
  info.addons.singleton = { 'hald-addon-input' }
  linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2'
  info.parent = '/org/freedesktop/Hal/devices/computer'
  info.subsystem = 'input'
  info.product = 'Sleep Button (CM)'
  info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2'
  info.category = 'input'
  linux.device_file = '/dev/input/event2'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'input'
  info.capabilities = { 'input', 'button' }

  39: udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1'
  input.device = '/dev/input/event3'
  input.product = 'Power Button (CM)'
  button.has_state = false
  button.type = 'power'
  info.addons.singleton = { 'hald-addon-input' }
  linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3'
  info.parent = '/org/freedesktop/Hal/devices/computer'
  info.subsystem = 'input'
  info.product = 'Power Button (CM)'
  info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1'
  info.category = 'input'
  linux.device_file = '/dev/input/event3'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'input'
  info.capabilities = { 'input', 'button' }

  40: udi = '/org/freedesktop/Hal/devices/computer_power_supply_battery_BAT1'
  linux.subsystem = 'power_supply'
  info.capabilities = { 'battery' }
  info.subsystem = 'power_supply'
  info.product = '4400'
  info.udi = '/org/freedesktop/Hal/devices/computer_power_supply_battery_BAT1'
  battery.type = 'primary'
  battery.reporting.technology = 'Unknown'
  battery.technology = 'unknown'
  battery.model = '4400'
  battery.vendor = 'Dynapack'
  battery.voltage.design = 14800 (0x39d0)
  battery.voltage.unit = 'mV'
  battery.reporting.design = 52800 (0xce40)
  battery.reporting.unit = 'mWh'
  battery.serial = 'Li4402A'
  battery.present = true
  battery.voltage.current = 15405 (0x3c2d)
  battery.reporting.rate = 13824 (0x3600)
  battery.is_rechargeable = true
  battery.rechargeable.is_charging = false
  battery.rechargeable.is_discharging = false
  battery.reporting.current = 288012 (0x4650c)
  battery.reporting.last_full = 288000 (0x46500)
  battery.charge_level.current = 288000 (0x46500)
  battery.charge_level.last_full = 288000 (0x46500)
  battery.charge_level.design = 52800 (0xce40)
  battery.charge_level.rate = 13824 (0x3600)
  battery.charge_level.percentage = 100 (0x64)
  linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0C0A:00/power_supply/BAT1'
  info.parent = '/org/freedesktop/Hal/devices/computer'
  info.category = 'battery'
  linux.hotplug_type = 2 (0x2)

  41: udi = '/org/freedesktop/Hal/devices/computer_power_supply_ac_adapter_AC'
  ac_adapter.present = true
  linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/ACPI0003:00/power_supply/AC'
  info.parent = '/org/freedesktop/Hal/devices/computer'
  info.subsystem = 'power_supply'
  info.product = 'Generic AC Adapter Device'
  info.udi = '/org/freedesktop/Hal/devices/computer_power_supply_ac_adapter_AC'
  info.category = 'ac_adapter'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'power_supply'
  info.capabilities = { 'ac_adapter' }

  42: udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input'
  input.device = '/dev/input/event0'
  input.product = 'Power Button (FF)'
  button.has_state = false
  button.type = 'power'
  info.addons.singleton = { 'hald-addon-input' }
  linux.sysfs_path = '/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0/event0'
  info.parent = '/org/freedesktop/Hal/devices/computer'
  info.subsystem = 'input'
  info.product = 'Power Button (FF)'
  info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input'
  info.category = 'input'
  linux.device_file = '/dev/input/event0'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'input'
  info.capabilities = { 'input', 'button' }

  43: udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01'
  pnp.id = 'PNP0c01'
  pnp.description = 'System Board'
  linux.sysfs_path = '/sys/devices/pnp0/00:0b'
  info.parent = '/org/freedesktop/Hal/devices/computer'
  info.subsystem = 'pnp'
  info.product = 'System Board'
  info.linux.driver = 'system'
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'pnp'

  44: udi = '/org/freedesktop/Hal/devices/pnp_SYN0b03'
  pnp.id = 'SYN0b03'
  linux.sysfs_path = '/sys/devices/pnp0/00:0a'
  info.parent = '/org/freedesktop/Hal/devices/computer'
  info.subsystem = 'pnp'
  info.product = 'PnP Device (SYN0b03)'
  info.linux.driver = 'i8042 aux'
  info.udi = '/org/freedesktop/Hal/devices/pnp_SYN0b03'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'pnp'

  45: udi = '/org/freedesktop/Hal/devices/pnp_PNP0303'
  pnp.id = 'PNP0303'
  pnp.description = 'IBM Enhanced (101/102-key, PS/2 mouse support)'
  linux.sysfs_path = '/sys/devices/pnp0/00:09'
  info.parent = '/org/freedesktop/Hal/devices/computer'
  info.subsystem = 'pnp'
  info.product = 'IBM Enhanced (101/102-key, PS/2 mouse support)'
  info.linux.driver = 'i8042 kbd'
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0303'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'pnp'

  46: udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_1'
  pnp.id = 'PNP0c02'
  pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'
  linux.sysfs_path = '/sys/devices/pnp0/00:08'
  info.parent = '/org/freedesktop/Hal/devices/computer'
  info.subsystem = 'pnp'
  info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'
  info.linux.driver = 'system'
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_1'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'pnp'

  47: udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0'
  pnp.id = 'PNP0c02'
  pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'
  linux.sysfs_path = '/sys/devices/pnp0/00:07'
  info.parent = '/org/freedesktop/Hal/devices/computer'
  info.subsystem = 'pnp'
  info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'
  info.linux.driver = 'system'
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'pnp'

  48: udi = '/org/freedesktop/Hal/devices/pnp_INT0800'
  pnp.id = 'INT0800'
  linux.sysfs_path = '/sys/devices/pnp0/00:06'
  info.parent = '/org/freedesktop/Hal/devices/computer'
  info.subsystem = 'pnp'
  info.product = 'PnP Device (INT0800)'
  info.udi = '/org/freedesktop/Hal/devices/pnp_INT0800'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'pnp'

  49: udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02'
  pnp.id = 'PNP0c02'
  pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'
  linux.sysfs_path = '/sys/devices/pnp0/00:05'
  info.parent = '/org/freedesktop/Hal/devices/computer'
  info.subsystem = 'pnp'
  info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'
  info.linux.driver = 'system'
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'pnp'

  50: udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04'
  pnp.id = 'PNP0c04'
  pnp.description = 'Math Coprocessor'
  linux.sysfs_path = '/sys/devices/pnp0/00:04'
  info.parent = '/org/freedesktop/Hal/devices/computer'
  info.subsystem = 'pnp'
  info.product = 'Math Coprocessor'
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'pnp'

  51: udi = '/org/freedesktop/Hal/devices/pnp_PNP0800'
  pnp.id = 'PNP0800'
  pnp.description = 'AT-style speaker sound'
  linux.sysfs_path = '/sys/devices/pnp0/00:03'
  info.parent = '/org/freedesktop/Hal/devices/computer'
  info.subsystem = 'pnp'
  info.product = 'AT-style speaker sound'
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0800'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'pnp'

  52: udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00'
  pnp.id = 'PNP0b00'
  pnp.description = 'AT Real-Time Clock'
  linux.sysfs_path = '/sys/devices/pnp0/00:02'
  info.parent = '/org/freedesktop/Hal/devices/computer'
  info.subsystem = 'pnp'
  info.product = 'AT Real-Time Clock'
  info.linux.driver = 'rtc_cmos'
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'pnp'

  53: udi = '/org/freedesktop/Hal/devices/pnp_PNP0200'
  pnp.id = 'PNP0200'
  pnp.description = 'AT DMA Controller'
  linux.sysfs_path = '/sys/devices/pnp0/00:01'
  info.parent = '/org/freedesktop/Hal/devices/computer'
  info.subsystem = 'pnp'
  info.product = 'AT DMA Controller'
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0200'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'pnp'

  54: udi = '/org/freedesktop/Hal/devices/pnp_PNP0a03'
  pnp.id = 'PNP0a03'
  pnp.description = 'PCI Bus'
  linux.sysfs_path = '/sys/devices/pnp0/00:00'
  info.parent = '/org/freedesktop/Hal/devices/computer'
  info.subsystem = 'pnp'
  info.product = 'PCI Bus'
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0a03'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'pnp'

  55: udi = '/org/freedesktop/Hal/devices/platform_serial8250'
  platform.id = 'serial8250'
  linux.sysfs_path = '/sys/devices/platform/serial8250'
  info.parent = '/org/freedesktop/Hal/devices/computer'
  info.subsystem = 'platform'
  info.linux.driver = 'serial8250'
  info.product = 'Platform Device (serial8250)'
  info.udi = '/org/freedesktop/Hal/devices/platform_serial8250'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'platform'

  56: udi = '/org/freedesktop/Hal/devices/platform_regulatory_0'
  platform.id = 'regulatory.0'
  linux.sysfs_path = '/sys/devices/platform/regulatory.0'
  info.parent = '/org/freedesktop/Hal/devices/computer'
  info.subsystem = 'platform'
  info.product = 'Platform Device (regulatory.0)'
  info.udi = '/org/freedesktop/Hal/devices/platform_regulatory_0'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'platform'

  57: udi = '/org/freedesktop/Hal/devices/platform_pcspkr'
  platform.id = 'pcspkr'
  linux.sysfs_path = '/sys/devices/platform/pcspkr'
  info.parent = '/org/freedesktop/Hal/devices/computer'
  info.subsystem = 'platform'
  info.linux.driver = 'pcspkr'
  info.product = 'Platform Device (pcspkr)'
  info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'platform'

  58: udi = '/org/freedesktop/Hal/devices/platform_iTCO_wdt'
  platform.id = 'iTCO_wdt'
  linux.sysfs_path = '/sys/devices/platform/iTCO_wdt'
  info.parent = '/org/freedesktop/Hal/devices/computer'
  info.subsystem = 'platform'
  info.linux.driver = 'iTCO_wdt'
  info.product = 'Platform Device (iTCO_wdt)'
  info.udi = '/org/freedesktop/Hal/devices/platform_iTCO_wdt'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'platform'

  59: udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port'
  serio.id = 'serio1'
  serio.description = 'i8042 AUX port'
  linux.sysfs_path = '/sys/devices/platform/i8042/serio1'
  info.parent = '/org/freedesktop/Hal/devices/platform_i8042'
  info.subsystem = 'serio'
  info.linux.driver = 'psmouse'
  info.product = 'i8042 AUX port'
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'serio'

  60: udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port'
  serio.id = 'serio0'
  serio.description = 'i8042 KBD port'
  linux.sysfs_path = '/sys/devices/platform/i8042/serio0'
  info.parent = '/org/freedesktop/Hal/devices/platform_i8042'
  info.subsystem = 'serio'
  info.linux.driver = 'atkbd'
  info.product = 'i8042 KBD port'
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'serio'

  61: udi = '/org/freedesktop/Hal/devices/platform_i8042'
  platform.id = 'i8042'
  linux.sysfs_path = '/sys/devices/platform/i8042'
  info.parent = '/org/freedesktop/Hal/devices/computer'
  info.subsystem = 'platform'
  info.linux.driver = 'i8042'
  info.product = 'Platform Device (i8042)'
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'platform'

  62: udi = '/org/freedesktop/Hal/devices/platform_eisa_0'
  platform.id = 'eisa.0'
  linux.sysfs_path = '/sys/devices/platform/eisa.0'
  info.parent = '/org/freedesktop/Hal/devices/computer'
  info.subsystem = 'platform'
  info.product = 'Platform Device (eisa.0)'
  info.udi = '/org/freedesktop/Hal/devices/platform_eisa_0'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'platform'

  63: udi = '/org/freedesktop/Hal/devices/platform_Fixed_MDIO_bus_0'
  platform.id = 'Fixed MDIO bus.0'
  linux.sysfs_path = '/sys/devices/platform/Fixed MDIO bus.0'
  info.parent = '/org/freedesktop/Hal/devices/computer'
  info.subsystem = 'platform'
  info.product = 'Platform Device (Fixed MDIO bus.0)'
  info.udi = '/org/freedesktop/Hal/devices/platform_Fixed_MDIO_bus_0'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'platform'

  64: udi = '/org/freedesktop/Hal/devices/pci_8086_24c6'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_24c6'
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.6'
  info.parent = '/org/freedesktop/Hal/devices/computer'
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.6'
  info.product = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller'
  pci.product_id = 9414 (0x24c6)
  pci.vendor_id = 32902 (0x8086)
  pci.subsys_product_id = 8239 (0x202f)
  pci.subsys_vendor_id = 5663 (0x161f)
  pci.device_class = 7 (0x7)
  pci.device_subclass = 3 (0x3)
  pci.device_protocol = 0 (0x0)
  pci.vendor = 'Intel Corporation'
  info.vendor = 'Intel Corporation'
  pci.product = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller'
  pci.subsys_vendor = 'Rioworks'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'pci'
  info.subsystem = 'pci'

  65: udi = '/org/freedesktop/Hal/devices/pci_8086_24c5'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_24c5'
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.5'
  info.parent = '/org/freedesktop/Hal/devices/computer'
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.5'
  info.product = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller'
  pci.product_id = 9413 (0x24c5)
  pci.vendor_id = 32902 (0x8086)
  pci.subsys_product_id = 8239 (0x202f)
  pci.subsys_vendor_id = 5663 (0x161f)
  pci.device_class = 4 (0x4)
  pci.device_subclass = 1 (0x1)
  pci.device_protocol = 0 (0x0)
  pci.vendor = 'Intel Corporation'
  info.vendor = 'Intel Corporation'
  pci.product = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller'
  pci.subsys_vendor = 'Rioworks'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'pci'
  info.subsystem = 'pci'

  66: udi = '/org/freedesktop/Hal/devices/pci_8086_24ca_scsi_host_0_scsi_device_lun0'
  scsi.type = 'cdrom'
  linux.subsystem = 'scsi'
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/host1/target1:0:0/1:0:0:0'
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_24ca_scsi_host_0'
  info.subsystem = 'scsi'
  info.product = 'SCSI Device'
  info.linux.driver = 'sr'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_24ca_scsi_host_0_scsi_device_lun0'
  scsi.host = 1 (0x1)
  scsi.bus = 0 (0x0)
  scsi.target = 0 (0x0)
  scsi.lun = 0 (0x0)
  scsi.model = 'COMBO LSC-24082K'
  scsi.vendor = 'Slimtype'
  linux.hotplug_type = 2 (0x2)

  67: udi = '/org/freedesktop/Hal/devices/pci_8086_24ca_scsi_host_0'
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/host1'
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_24ca'
  info.subsystem = 'scsi_host'
  info.product = 'SCSI Host Adapter'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_24ca_scsi_host_0'
  scsi_host.host = 1 (0x1)
  info.category = 'scsi_host'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'scsi_host'
  info.capabilities = { 'scsi_host' }

  68: udi = '/org/freedesktop/Hal/devices/pci_8086_24ca_scsi_host_scsi_device_lun0'
  scsi.type = 'disk'
  linux.subsystem = 'scsi'
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0'
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_24ca_scsi_host'
  info.subsystem = 'scsi'
  info.product = 'SCSI Device'
  info.linux.driver = 'sd'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_24ca_scsi_host_scsi_device_lun0'
  scsi.host = 0 (0x0)
  scsi.bus = 0 (0x0)
  scsi.target = 0 (0x0)
  scsi.lun = 0 (0x0)
  scsi.model = 'ST94811A'
  scsi.vendor = 'ATA'
  linux.hotplug_type = 2 (0x2)

  69: udi = '/org/freedesktop/Hal/devices/pci_8086_24ca_scsi_host'
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/host0'
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_24ca'
  info.subsystem = 'scsi_host'
  info.product = 'SCSI Host Adapter'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_24ca_scsi_host'
  scsi_host.host = 0 (0x0)
  info.category = 'scsi_host'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'scsi_host'
  info.capabilities = { 'scsi_host' }

  70: udi = '/org/freedesktop/Hal/devices/pci_8086_24ca'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_24ca'
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1'
  info.parent = '/org/freedesktop/Hal/devices/computer'
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1'
  info.linux.driver = 'ata_piix'
  pci.product_id = 9418 (0x24ca)
  pci.vendor_id = 32902 (0x8086)
  pci.subsys_product_id = 8239 (0x202f)
  pci.subsys_vendor_id = 5663 (0x161f)
  pci.device_class = 1 (0x1)
  pci.device_subclass = 1 (0x1)
  pci.device_protocol = 138 (0x8a)
  pci.vendor = 'Intel Corporation'
  info.vendor = 'Intel Corporation'
  pci.product = '82801DBM (ICH4-M) IDE Controller'
  pci.subsys_vendor = 'Rioworks'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'pci'
  info.subsystem = 'pci'
  info.product = '82801DBM (ICH4-M) IDE Controller'

  71: udi = '/org/freedesktop/Hal/devices/pci_8086_24cc'
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.0'
  info.parent = '/org/freedesktop/Hal/devices/computer'
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.0'
  info.product = '82801DBM (ICH4-M) LPC Interface Bridge'
  pci.product_id = 9420 (0x24cc)
  pci.vendor_id = 32902 (0x8086)
  pci.subsys_product_id = 0 (0x0)
  pci.subsys_vendor_id = 0 (0x0)
  pci.device_class = 6 (0x6)
  pci.device_subclass = 1 (0x1)
  pci.device_protocol = 0 (0x0)
  pci.vendor = 'Intel Corporation'
  info.vendor = 'Intel Corporation'
  pci.product = '82801DBM (ICH4-M) LPC Interface Bridge'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_24cc'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'pci'
  info.subsystem = 'pci'

  72: udi = '/org/freedesktop/Hal/devices/ssb__null_'
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:01:09.0/ssb0:1'
  info.parent = '/org/freedesktop/Hal/devices/pci_14e4_4320'
  info.subsystem = 'ssb'
  info.udi = '/org/freedesktop/Hal/devices/ssb__null_'
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0/0000:01:09.0/ssb0:1'
  info.bus = 'ssb'
  ssb.bus_id = 'ssb0:1'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'ssb'

  73: udi = '/org/freedesktop/Hal/devices/ssb__null_'
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:01:09.0/ssb0:1'
  info.parent = '/org/freedesktop/Hal/devices/pci_14e4_4320'
  info.subsystem = 'ssb'
  info.udi = '/org/freedesktop/Hal/devices/ssb__null_'
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0/0000:01:09.0/ssb0:1'
  info.bus = 'ssb'
  ssb.bus_id = 'ssb0:1'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'ssb'

  74: udi = '/org/freedesktop/Hal/devices/pci_14e4_4320'
  info.udi = '/org/freedesktop/Hal/devices/pci_14e4_4320'
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:01:09.0'
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448'
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:01:09.0'
  info.linux.driver = 'b43-pci-bridge'
  pci.product_id = 17184 (0x4320)
  pci.vendor_id = 5348 (0x14e4)
  pci.subsys_product_id = 1048 (0x418)
  pci.subsys_vendor_id = 5348 (0x14e4)
  pci.device_class = 2 (0x2)
  pci.device_subclass = 128 (0x80)
  pci.device_protocol = 0 (0x0)
  pci.vendor = 'Broadcom Corporation'
  info.vendor = 'Broadcom Corporation'
  pci.product = 'BCM4306 802.11b/g Wireless LAN Controller'
  pci.subsys_vendor = 'Broadcom Corporation'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'pci'
  info.subsystem = 'pci'
  info.product = 'BCM4306 802.11b/g Wireless LAN Controller'

  75: udi = '/org/freedesktop/Hal/devices/ssb__null_'
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:01:09.0/ssb0:1'
  info.parent = '/org/freedesktop/Hal/devices/pci_14e4_4320'
  info.subsystem = 'ssb'
  info.udi = '/org/freedesktop/Hal/devices/ssb__null_'
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0/0000:01:09.0/ssb0:1'
  info.bus = 'ssb'
  ssb.bus_id = 'ssb0:1'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'ssb'

  76: udi = '/org/freedesktop/Hal/devices/ssb__null_'
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:01:09.0/ssb0:1'
  info.parent = '/org/freedesktop/Hal/devices/pci_14e4_4320'
  info.subsystem = 'ssb'
  info.udi = '/org/freedesktop/Hal/devices/ssb__null_'
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0/0000:01:09.0/ssb0:1'
  info.bus = 'ssb'
  ssb.bus_id = 'ssb0:1'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'ssb'

  77: udi = '/org/freedesktop/Hal/devices/pci_14e4_4401'
  info.udi = '/org/freedesktop/Hal/devices/pci_14e4_4401'
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:01:06.0'
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448'
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:01:06.0'
  info.linux.driver = 'b44'
  pci.product_id = 17409 (0x4401)
  pci.vendor_id = 5348 (0x14e4)
  pci.subsys_product_id = 8233 (0x2029)
  pci.subsys_vendor_id = 5663 (0x161f)
  pci.device_class = 2 (0x2)
  pci.device_subclass = 0 (0x0)
  pci.device_protocol = 0 (0x0)
  pci.vendor = 'Broadcom Corporation'
  info.vendor = 'Broadcom Corporation'
  pci.product = 'BCM4401 100Base-T'
  pci.subsys_vendor = 'Rioworks'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'pci'
  info.subsystem = 'pci'
  info.product = 'BCM4401 100Base-T'

  78: udi = '/org/freedesktop/Hal/devices/pci_104c_ac56'
  info.udi = '/org/freedesktop/Hal/devices/pci_104c_ac56'
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:01:05.0'
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448'
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:01:05.0'
  info.linux.driver = 'yenta_cardbus'
  pci.product_id = 44118 (0xac56)
  pci.vendor_id = 4172 (0x104c)
  pci.subsys_product_id = 8239 (0x202f)
  pci.subsys_vendor_id = 5663 (0x161f)
  pci.device_class = 6 (0x6)
  pci.device_subclass = 7 (0x7)
  pci.device_protocol = 0 (0x0)
  pci.vendor = 'Texas Instruments'
  info.vendor = 'Texas Instruments'
  pci.product = 'PCI1510 PC card Cardbus Controller'
  pci.subsys_vendor = 'Rioworks'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'pci'
  info.subsystem = 'pci'
  info.product = 'PCI1510 PC card Cardbus Controller'

  79: udi = '/org/freedesktop/Hal/devices/pci_8086_2448'
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0'
  info.parent = '/org/freedesktop/Hal/devices/computer'
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0'
  info.product = '82801 Mobile PCI Bridge'
  pci.product_id = 9288 (0x2448)
  pci.vendor_id = 32902 (0x8086)
  pci.subsys_product_id = 0 (0x0)
  pci.subsys_vendor_id = 0 (0x0)
  pci.device_class = 6 (0x6)
  pci.device_subclass = 4 (0x4)
  pci.device_protocol = 0 (0x0)
  pci.vendor = 'Intel Corporation'
  info.vendor = 'Intel Corporation'
  pci.product = '82801 Mobile PCI Bridge'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2448'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'pci'
  info.subsystem = 'pci'

  80: udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7_if0'
  linux.subsystem = 'usb'
  info.subsystem = 'usb'
  info.product = 'USB Hub Interface'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7_if0'
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-0:1.0'
  usb.configuration_value = 1 (0x1)
  usb.num_configurations = 1 (0x1)
  usb.num_interfaces = 1 (0x1)
  usb.device_class = 9 (0x9)
  usb.device_subclass = 0 (0x0)
  usb.device_protocol = 0 (0x0)
  usb.vendor_id = 7531 (0x1d6b)
  usb.product_id = 2 (0x2)
  usb.vendor = 'Linux Foundation'
  usb.product = 'USB Hub Interface'
  usb.num_ports = 6 (0x6)
  usb.device_revision_bcd = 518 (0x206)
  usb.linux.device_number = 1 (0x1)
  usb.speed = 480.000
  usb.version = 2.00000
  usb.can_wake_up = true
  usb.bus_number = 1 (0x1)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-0:1.0'
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7'
  usb.is_self_powered = true
  usb.max_power = 0 (0x0)
  usb.interface.class = 9 (0x9)
  usb.serial = '0000:00:1d.7'
  usb.interface.subclass = 0 (0x0)
  usb.interface.protocol = 0 (0x0)
  info.linux.driver = 'hub'
  usb.interface.number = 0 (0x0)
  linux.hotplug_type = 2 (0x2)

  81: udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7'
  linux.subsystem = 'usb'
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1'
  usb_device.configuration_value = 1 (0x1)
  usb_device.num_configurations = 1 (0x1)
  usb_device.num_interfaces = 1 (0x1)
  usb_device.device_class = 9 (0x9)
  usb_device.device_subclass = 0 (0x0)
  usb_device.device_protocol = 0 (0x0)
  usb_device.vendor_id = 7531 (0x1d6b)
  usb_device.product_id = 2 (0x2)
  usb_device.vendor = 'Linux Foundation'
  info.subsystem = 'usb_device'
  usb_device.product = '2.0 root hub'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7'
  usb_device.num_ports = 6 (0x6)
  usb_device.device_revision_bcd = 518 (0x206)
  usb_device.linux.device_number = 1 (0x1)
  usb_device.speed = 480.000
  info.product = '2.0 root hub'
  usb_device.version = 2.00000
  usb_device.can_wake_up = true
  usb_device.bus_number = 1 (0x1)
  linux.device_file = '/dev/bus/usb/001/001'
  usb_device.max_power = 0 (0x0)
  usb_device.is_self_powered = true
  usb_device.serial = '0000:00:1d.7'
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1'
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_24cd'
  info.linux.driver = 'usb'
  info.vendor = 'Linux Foundation'
  linux.hotplug_type = 2 (0x2)

  82: udi = '/org/freedesktop/Hal/devices/pci_8086_24cd'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_24cd'
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7'
  info.parent = '/org/freedesktop/Hal/devices/computer'
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7'
  info.linux.driver = 'ehci_hcd'
  pci.product_id = 9421 (0x24cd)
  pci.vendor_id = 32902 (0x8086)
  pci.subsys_product_id = 8239 (0x202f)
  pci.subsys_vendor_id = 5663 (0x161f)
  pci.device_class = 12 (0xc)
  pci.device_subclass = 3 (0x3)
  pci.device_protocol = 32 (0x20)
  pci.vendor = 'Intel Corporation'
  info.vendor = 'Intel Corporation'
  pci.product = '82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller'
  pci.subsys_vendor = 'Rioworks'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'pci'
  info.subsystem = 'pci'
  info.product = '82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller'

  83: udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2_if0'
  linux.subsystem = 'usb'
  info.subsystem = 'usb'
  info.product = 'USB Hub Interface'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2_if0'
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb4/4-0:1.0'
  usb.configuration_value = 1 (0x1)
  usb.num_configurations = 1 (0x1)
  usb.num_interfaces = 1 (0x1)
  usb.device_class = 9 (0x9)
  usb.device_subclass = 0 (0x0)
  usb.device_protocol = 0 (0x0)
  usb.vendor_id = 7531 (0x1d6b)
  usb.product_id = 1 (0x1)
  usb.vendor = 'Linux Foundation'
  usb.product = 'USB Hub Interface'
  usb.num_ports = 2 (0x2)
  usb.device_revision_bcd = 518 (0x206)
  usb.linux.device_number = 1 (0x1)
  usb.speed = 12.0000
  usb.version = 1.10000
  usb.can_wake_up = true
  usb.bus_number = 4 (0x4)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb4/4-0:1.0'
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2'
  usb.is_self_powered = true
  usb.max_power = 0 (0x0)
  usb.interface.class = 9 (0x9)
  usb.serial = '0000:00:1d.2'
  usb.interface.subclass = 0 (0x0)
  usb.interface.protocol = 0 (0x0)
  info.linux.driver = 'hub'
  usb.interface.number = 0 (0x0)
  linux.hotplug_type = 2 (0x2)

  84: udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2'
  linux.subsystem = 'usb'
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb4'
  usb_device.configuration_value = 1 (0x1)
  usb_device.num_configurations = 1 (0x1)
  usb_device.num_interfaces = 1 (0x1)
  usb_device.device_class = 9 (0x9)
  usb_device.device_subclass = 0 (0x0)
  usb_device.device_protocol = 0 (0x0)
  usb_device.vendor_id = 7531 (0x1d6b)
  usb_device.product_id = 1 (0x1)
  usb_device.vendor = 'Linux Foundation'
  info.subsystem = 'usb_device'
  usb_device.product = '1.1 root hub'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2'
  usb_device.num_ports = 2 (0x2)
  usb_device.device_revision_bcd = 518 (0x206)
  usb_device.linux.device_number = 1 (0x1)
  usb_device.speed = 12.0000
  info.product = '1.1 root hub'
  usb_device.version = 1.10000
  usb_device.can_wake_up = true
  usb_device.bus_number = 4 (0x4)
  linux.device_file = '/dev/bus/usb/004/001'
  usb_device.max_power = 0 (0x0)
  usb_device.is_self_powered = true
  usb_device.serial = '0000:00:1d.2'
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb4'
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_24c7'
  info.linux.driver = 'usb'
  info.vendor = 'Linux Foundation'
  linux.hotplug_type = 2 (0x2)

  85: udi = '/org/freedesktop/Hal/devices/pci_8086_24c7'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_24c7'
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2'
  info.parent = '/org/freedesktop/Hal/devices/computer'
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2'
  info.linux.driver = 'uhci_hcd'
  pci.product_id = 9415 (0x24c7)
  pci.vendor_id = 32902 (0x8086)
  pci.subsys_product_id = 8239 (0x202f)
  pci.subsys_vendor_id = 5663 (0x161f)
  pci.device_class = 12 (0xc)
  pci.device_subclass = 3 (0x3)
  pci.device_protocol = 0 (0x0)
  pci.vendor = 'Intel Corporation'
  info.vendor = 'Intel Corporation'
  pci.product = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3'
  pci.subsys_vendor = 'Rioworks'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'pci'
  info.subsystem = 'pci'
  info.product = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3'

  86: udi = '/org/freedesktop/Hal/devices/usb_device_4d9_499_noserial_if0'
  linux.subsystem = 'usb'
  info.subsystem = 'usb'
  info.product = 'USB HID Interface'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_4d9_499_noserial_if0'
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0'
  usb.configuration_value = 1 (0x1)
  usb.num_configurations = 1 (0x1)
  usb.num_interfaces = 1 (0x1)
  usb.device_class = 0 (0x0)
  usb.device_subclass = 0 (0x0)
  usb.device_protocol = 0 (0x0)
  usb.vendor_id = 1241 (0x4d9)
  usb.product_id = 1177 (0x499)
  usb.vendor = 'Holtek Semiconductor, Inc.'
  usb.product = 'USB HID Interface'
  usb.num_ports = 0 (0x0)
  usb.device_revision_bcd = 656 (0x290)
  usb.linux.device_number = 2 (0x2)
  usb.speed = 1.50000
  usb.version = 1.10000
  usb.can_wake_up = true
  usb.bus_number = 3 (0x3)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0'
  info.parent = '/org/freedesktop/Hal/devices/usb_device_4d9_499_noserial'
  usb.is_self_powered = false
  usb.max_power = 100 (0x64)
  usb.interface.class = 3 (0x3)
  info.linux.driver = 'usbhid'
  usb.interface.protocol = 2 (0x2)
  usb.interface.subclass = 1 (0x1)
  usb.interface.number = 0 (0x0)
  linux.hotplug_type = 2 (0x2)

  87: udi = '/org/freedesktop/Hal/devices/usb_device_4d9_499_noserial'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_4d9_499_noserial'
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1'
  usb_device.configuration_value = 1 (0x1)
  usb_device.num_configurations = 1 (0x1)
  usb_device.num_interfaces = 1 (0x1)
  usb_device.device_class = 0 (0x0)
  usb_device.device_subclass = 0 (0x0)
  usb_device.device_protocol = 0 (0x0)
  usb_device.vendor_id = 1241 (0x4d9)
  usb_device.product_id = 1177 (0x499)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1'
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1'
  info.subsystem = 'usb_device'
  info.linux.driver = 'usb'
  info.product = 'Unknown (0x0499)'
  usb_device.device_revision_bcd = 656 (0x290)
  usb_device.vendor = 'Holtek Semiconductor, Inc.'
  usb_device.num_ports = 0 (0x0)
  usb_device.linux.device_number = 2 (0x2)
  usb_device.max_power = 100 (0x64)
  usb_device.speed = 1.50000
  usb_device.version = 1.10000
  info.vendor = 'Holtek Semiconductor, Inc.'
  usb_device.can_wake_up = true
  usb_device.bus_number = 3 (0x3)
  usb_device.is_self_powered = false
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'usb'
  linux.device_file = '/dev/bus/usb/003/002'

  88: udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1_if0'
  linux.subsystem = 'usb'
  info.subsystem = 'usb'
  info.product = 'USB Hub Interface'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1_if0'
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-0:1.0'
  usb.configuration_value = 1 (0x1)
  usb.num_configurations = 1 (0x1)
  usb.num_interfaces = 1 (0x1)
  usb.device_class = 9 (0x9)
  usb.device_subclass = 0 (0x0)
  usb.device_protocol = 0 (0x0)
  usb.vendor_id = 7531 (0x1d6b)
  usb.product_id = 1 (0x1)
  usb.vendor = 'Linux Foundation'
  usb.product = 'USB Hub Interface'
  usb.num_ports = 2 (0x2)
  usb.device_revision_bcd = 518 (0x206)
  usb.linux.device_number = 1 (0x1)
  usb.speed = 12.0000
  usb.version = 1.10000
  usb.can_wake_up = true
  usb.bus_number = 3 (0x3)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-0:1.0'
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1'
  usb.is_self_powered = true
  usb.max_power = 0 (0x0)
  usb.interface.class = 9 (0x9)
  usb.serial = '0000:00:1d.1'
  usb.interface.subclass = 0 (0x0)
  usb.interface.protocol = 0 (0x0)
  info.linux.driver = 'hub'
  usb.interface.number = 0 (0x0)
  linux.hotplug_type = 2 (0x2)

  89: udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1'
  linux.subsystem = 'usb'
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3'
  usb_device.configuration_value = 1 (0x1)
  usb_device.num_configurations = 1 (0x1)
  usb_device.num_interfaces = 1 (0x1)
  usb_device.device_class = 9 (0x9)
  usb_device.device_subclass = 0 (0x0)
  usb_device.device_protocol = 0 (0x0)
  usb_device.vendor_id = 7531 (0x1d6b)
  usb_device.product_id = 1 (0x1)
  usb_device.vendor = 'Linux Foundation'
  info.subsystem = 'usb_device'
  usb_device.product = '1.1 root hub'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1'
  usb_device.num_ports = 2 (0x2)
  usb_device.device_revision_bcd = 518 (0x206)
  usb_device.linux.device_number = 1 (0x1)
  usb_device.speed = 12.0000
  info.product = '1.1 root hub'
  usb_device.version = 1.10000
  usb_device.can_wake_up = true
  usb_device.bus_number = 3 (0x3)
  linux.device_file = '/dev/bus/usb/003/001'
  usb_device.max_power = 0 (0x0)
  usb_device.is_self_powered = true
  usb_device.serial = '0000:00:1d.1'
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3'
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_24c4'
  info.linux.driver = 'usb'
  info.vendor = 'Linux Foundation'
  linux.hotplug_type = 2 (0x2)

  90: udi = '/org/freedesktop/Hal/devices/pci_8086_24c4'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_24c4'
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1'
  info.parent = '/org/freedesktop/Hal/devices/computer'
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1'
  info.linux.driver = 'uhci_hcd'
  pci.product_id = 9412 (0x24c4)
  pci.vendor_id = 32902 (0x8086)
  pci.subsys_product_id = 8239 (0x202f)
  pci.subsys_vendor_id = 5663 (0x161f)
  pci.device_class = 12 (0xc)
  pci.device_subclass = 3 (0x3)
  pci.device_protocol = 0 (0x0)
  pci.vendor = 'Intel Corporation'
  info.vendor = 'Intel Corporation'
  pci.product = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2'
  pci.subsys_vendor = 'Rioworks'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'pci'
  info.subsystem = 'pci'
  info.product = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2'

  91: udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0_if0'
  linux.subsystem = 'usb'
  info.subsystem = 'usb'
  info.product = 'USB Hub Interface'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0_if0'
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-0:1.0'
  usb.configuration_value = 1 (0x1)
  usb.num_configurations = 1 (0x1)
  usb.num_interfaces = 1 (0x1)
  usb.device_class = 9 (0x9)
  usb.device_subclass = 0 (0x0)
  usb.device_protocol = 0 (0x0)
  usb.vendor_id = 7531 (0x1d6b)
  usb.product_id = 1 (0x1)
  usb.vendor = 'Linux Foundation'
  usb.product = 'USB Hub Interface'
  usb.num_ports = 2 (0x2)
  usb.device_revision_bcd = 518 (0x206)
  usb.linux.device_number = 1 (0x1)
  usb.speed = 12.0000
  usb.version = 1.10000
  usb.can_wake_up = true
  usb.bus_number = 2 (0x2)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-0:1.0'
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0'
  usb.is_self_powered = true
  usb.max_power = 0 (0x0)
  usb.interface.class = 9 (0x9)
  usb.serial = '0000:00:1d.0'
  usb.interface.subclass = 0 (0x0)
  usb.interface.protocol = 0 (0x0)
  info.linux.driver = 'hub'
  usb.interface.number = 0 (0x0)
  linux.hotplug_type = 2 (0x2)

  92: udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0'
  linux.subsystem = 'usb'
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2'
  usb_device.configuration_value = 1 (0x1)
  usb_device.num_configurations = 1 (0x1)
  usb_device.num_interfaces = 1 (0x1)
  usb_device.device_class = 9 (0x9)
  usb_device.device_subclass = 0 (0x0)
  usb_device.device_protocol = 0 (0x0)
  usb_device.vendor_id = 7531 (0x1d6b)
  usb_device.product_id = 1 (0x1)
  usb_device.vendor = 'Linux Foundation'
  info.subsystem = 'usb_device'
  usb_device.product = '1.1 root hub'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0'
  usb_device.num_ports = 2 (0x2)
  usb_device.device_revision_bcd = 518 (0x206)
  usb_device.linux.device_number = 1 (0x1)
  usb_device.speed = 12.0000
  info.product = '1.1 root hub'
  usb_device.version = 1.10000
  usb_device.can_wake_up = true
  usb_device.bus_number = 2 (0x2)
  linux.device_file = '/dev/bus/usb/002/001'
  usb_device.max_power = 0 (0x0)
  usb_device.is_self_powered = true
  usb_device.serial = '0000:00:1d.0'
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2'
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_24c2'
  info.linux.driver = 'usb'
  info.vendor = 'Linux Foundation'
  linux.hotplug_type = 2 (0x2)

  93: udi = '/org/freedesktop/Hal/devices/pci_8086_24c2'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_24c2'
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0'
  info.parent = '/org/freedesktop/Hal/devices/computer'
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0'
  info.linux.driver = 'uhci_hcd'
  pci.product_id = 9410 (0x24c2)
  pci.vendor_id = 32902 (0x8086)
  pci.subsys_product_id = 8239 (0x202f)
  pci.subsys_vendor_id = 5663 (0x161f)
  pci.device_class = 12 (0xc)
  pci.device_subclass = 3 (0x3)
  pci.device_protocol = 0 (0x0)
  pci.vendor = 'Intel Corporation'
  info.vendor = 'Intel Corporation'
  pci.product = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1'
  pci.subsys_vendor = 'Rioworks'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'pci'
  info.subsystem = 'pci'
  info.product = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1'

  94: udi = '/org/freedesktop/Hal/devices/pci_8086_3582_0'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_3582_0'
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1'
  info.parent = '/org/freedesktop/Hal/devices/computer'
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1'
  info.product = '82852/855GM Integrated Graphics Device'
  pci.product_id = 13698 (0x3582)
  pci.vendor_id = 32902 (0x8086)
  pci.subsys_product_id = 8239 (0x202f)
  pci.subsys_vendor_id = 5663 (0x161f)
  pci.device_class = 3 (0x3)
  pci.device_subclass = 128 (0x80)
  pci.device_protocol = 0 (0x0)
  pci.vendor = 'Intel Corporation'
  info.vendor = 'Intel Corporation'
  pci.product = '82852/855GM Integrated Graphics Device'
  pci.subsys_vendor = 'Rioworks'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'pci'
  info.subsystem = 'pci'

  95: udi = '/org/freedesktop/Hal/devices/pci_8086_3582'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_3582'
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0'
  info.parent = '/org/freedesktop/Hal/devices/computer'
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0'
  info.product = '82852/855GM Integrated Graphics Device'
  pci.product_id = 13698 (0x3582)
  pci.vendor_id = 32902 (0x8086)
  pci.subsys_product_id = 8239 (0x202f)
  pci.subsys_vendor_id = 5663 (0x161f)
  pci.device_class = 3 (0x3)
  pci.device_subclass = 0 (0x0)
  pci.device_protocol = 0 (0x0)
  pci.vendor = 'Intel Corporation'
  info.vendor = 'Intel Corporation'
  pci.product = '82852/855GM Integrated Graphics Device'
  pci.subsys_vendor = 'Rioworks'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'pci'
  info.subsystem = 'pci'

  96: udi = '/org/freedesktop/Hal/devices/pci_8086_3585'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_3585'
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.3'
  info.parent = '/org/freedesktop/Hal/devices/computer'
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.3'
  info.product = '82852/82855 GM/GME/PM/GMV Processor to I/O Controller'
  pci.product_id = 13701 (0x3585)
  pci.vendor_id = 32902 (0x8086)
  pci.subsys_product_id = 8239 (0x202f)
  pci.subsys_vendor_id = 5663 (0x161f)
  pci.device_class = 8 (0x8)
  pci.device_subclass = 128 (0x80)
  pci.device_protocol = 0 (0x0)
  pci.vendor = 'Intel Corporation'
  info.vendor = 'Intel Corporation'
  pci.product = '82852/82855 GM/GME/PM/GMV Processor to I/O Controller'
  pci.subsys_vendor = 'Rioworks'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'pci'
  info.subsystem = 'pci'

  97: udi = '/org/freedesktop/Hal/devices/pci_8086_3584'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_3584'
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.1'
  info.parent = '/org/freedesktop/Hal/devices/computer'
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.1'
  info.product = '82852/82855 GM/GME/PM/GMV Processor to I/O Controller'
  pci.product_id = 13700 (0x3584)
  pci.vendor_id = 32902 (0x8086)
  pci.subsys_product_id = 8239 (0x202f)
  pci.subsys_vendor_id = 5663 (0x161f)
  pci.device_class = 8 (0x8)
  pci.device_subclass = 128 (0x80)
  pci.device_protocol = 0 (0x0)
  pci.vendor = 'Intel Corporation'
  info.vendor = 'Intel Corporation'
  pci.product = '82852/82855 GM/GME/PM/GMV Processor to I/O Controller'
  pci.subsys_vendor = 'Rioworks'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'pci'
  info.subsystem = 'pci'

  98: udi = '/org/freedesktop/Hal/devices/pci_8086_3580'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_3580'
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0'
  info.parent = '/org/freedesktop/Hal/devices/computer'
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0'
  info.linux.driver = 'agpgart-intel'
  pci.product_id = 13696 (0x3580)
  pci.vendor_id = 32902 (0x8086)
  pci.subsys_product_id = 8239 (0x202f)
  pci.subsys_vendor_id = 5663 (0x161f)
  pci.device_class = 6 (0x6)
  pci.device_subclass = 0 (0x0)
  pci.device_protocol = 0 (0x0)
  pci.vendor = 'Intel Corporation'
  info.vendor = 'Intel Corporation'
  pci.product = '82852/82855 GM/GME/PM/GMV Processor to I/O Controller'
  pci.subsys_vendor = 'Rioworks'
  linux.hotplug_type = 2 (0x2)
  linux.subsystem = 'pci'
  info.subsystem = 'pci'
  info.product = '82852/82855 GM/GME/PM/GMV Processor to I/O Controller'
----- hal device list end -----
>> floppy.1: get nvram
>> floppy.2: klog info
>> bios.1: cmdline
>> bios.1.1: apm
>> bios.2: ram
/dev/mem[0x400, 256]: mmap(, 4096,,,, 0x0) ok
/dev/mem[0xc0000, 262144]: mmap(, 262144,,,, 0xc0000) ok
  bios: 1 disks
  bios: 639k low mem
/dev/mem[0x9fc00, 1]: mmap(, 4096,,,, 0x9f000) ok
/dev/mem[0x9fc00, 1024]: mmap(, 4096,,,, 0x9f000) ok
  bios: EBDA 0x00400 bytes at 0x9fc00
>> bios.2: rom
----- SMBIOS Entry Point 0xf72a0 - 0xf72be -----
  f72a0  5f 53 4d 5f 32 1f 02 03 4b 01 00 00 00 00 00 00  "_SM_2...K......."
  f72b0  5f 44 4d 49 5f bf d1 08 e0 87 0f 00 37 00 23  "_DMI_.......7.#"
----- SMBIOS Entry Point end -----
/dev/mem[0xf87e0, 2257]: mmap(, 8192,,,, 0xf8000) ok
----- SMBIOS Structure Table 0xf87e0 - 0xf90b0 -----
  f87e0  00 14 00 00 01 02 00 f0 03 07 90 df b9 7c 00 00  ".............|.."
  f87f0  00 00 87 03 41 4d 49 20 20 20 20 20 20 20 20 20  "....AMI         "
  f8800  20 20 20 20 20 20 20 20 20 20 20 20 20 20 00 4e  "              .N"
  f8810  4f 54 45 20 42 49 4f 53 20 56 65 72 73 69 6f 6e  "OTE BIOS Version"
  f8820  20 2f 35 32 2e 30 30 2e 31 32 20 20 20 20 20 00  " /52.00.12     ."
  f8830  30 37 2f 31 39 2f 32 30 30 34 00 00 01 19 01 00  "07/19/2004......"
  f8840  01 02 03 04 ff ff ff ff ff ff ff ff ff ff ff ff  "................"
  f8850  ff ff ff ff 06 47 61 74 65 77 61 79 20 20 20 20  ".....Gateway    "
  f8860  20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20  "                "
  f8870  20 20 20 20 20 00 47 61 74 65 77 61 79 20 4d 35  "     .Gateway M5"
  f8880  32 30 20 20 20 20 20 20 20 20 20 20 20 20 20 20  "20              "
  f8890  20 20 20 20 20 20 00 35 32 2e 30 30 2e 31 32 20  "      .52.00.12 "
  f88a0  20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20  "                "
  f88b0  20 20 20 20 20 20 20 00 31 31 30 31 31 32 31 31  "       .11011211"
  f88c0  36 33 20 20 20 20 20 20 20 20 20 20 20 20 20 20  "63              "
  f88d0  20 20 20 20 20 20 20 20 00 00 02 08 02 00 01 02  "        ........"
  f88e0  03 04 47 61 74 65 77 61 79 20 20 20 20 20 20 20  "..Gateway       "
  f88f0  20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20  "                "
  f8900  20 20 00 47 61 74 65 77 61 79 20 4d 35 32 30 20  "  .Gateway M520 "
  f8910  20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20  "                "
  f8920  20 20 20 00 4b 42 43 20 4b 35 32 2e 30 30 2e 30  "   .KBC K52.00.0"
  f8930  36 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20  "6               "
  f8940  20 20 20 20 00 30 31 32 33 34 35 36 37 38 39 30  "    .01234567890"
  f8950  31 32 33 34 35 20 20 20 20 20 20 20 20 20 20 20  "12345           "
  f8960  20 20 20 20 20 00 00 03 11 03 00 01 0a 02 03 04  "     ..........."
  f8970  02 02 02 02 34 12 00 00 47 61 74 65 77 61 79 20  "....4...Gateway "
  f8980  20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20  "                "
  f8990  20 20 20 20 20 20 20 20 00 52 65 76 20 31 2e 30  "        .Rev 1.0"
  f89a0  20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20  "                "
  f89b0  20 20 20 20 20 20 20 20 20 00 20 20 20 20 20 20  "         .      "
  f89c0  20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20  "                "
  f89d0  20 20 20 20 20 20 20 20 20 20 00 20 20 20 20 20  "          .     "
  f89e0  20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20  "                "
  f89f0  20 20 20 20 20 20 20 20 20 20 20 00 00 04 23 04  "           ...#."
  f8a00  00 01 03 b2 02 34 0f 00 00 ff fb eb bf 03 8c 15  ".....4.........."
  f8a10  02 f0 0a 4b 07 41 0f 05 00 06 00 ff ff 04 05 06  "...K.A.........."
  f8a20  53 6f 63 6b 65 74 20 34 37 38 00 49 6e 74 65 6c  "Socket 478.Intel"
  f8a30  20 43 6f 72 70 6f 72 61 74 69 6f 6e 00 4d 6f 62  " Corporation.Mob"
  f8a40  69 6c 65 20 49 6e 74 65 6c 28 52 29 20 50 65 6e  "ile Intel(R) Pen"
  f8a50  74 69 75 6d 28 52 29 20 34 20 43 50 55 20 32 2e  "tium(R) 4 CPU 2."
  f8a60  38 30 47 48 7a 20 20 20 20 20 20 20 20 20 20 20  "80GHz           "
  f8a70  20 00 2e 00 2e 00 2e 00 00 07 13 05 00 01 80 01  " ..............."
  f8a80  10 00 10 00 01 00 01 00 00 03 01 05 49 6e 74 65  "............Inte"
  f8a90  72 6e 61 6c 00 00 07 13 06 00 01 81 01 00 04 00  "rnal............"
  f8aa0  04 10 00 10 00 00 03 01 01 49 6e 74 65 72 6e 61  ".........Interna"
  f8ab0  6c 00 00 05 14 07 00 03 04 03 03 0a 01 00 01 05  "l..............."
  f8ac0  00 02 08 00 09 00 02 00 00 06 0c 08 00 01 01 00  "................"
  f8ad0  00 05 88 88 00 4d 65 6d 6f 72 79 20 53 6c 6f 74  ".....Memory Slot"
  f8ae0  31 00 00 06 0c 09 00 01 23 00 00 05 88 88 00 4d  "1.......#......M"
  f8af0  65 6d 6f 72 79 20 53 6c 6f 74 32 00 00 08 09 0a  "emory Slot2....."
  f8b00  00 01 00 02 0f ff 4a 31 41 31 00 4b 65 79 62 6f  "......J1A1.Keybo"
  f8b10  61 72 64 2f 4d 6f 75 73 65 00 00 08 09 0b 00 01  "ard/Mouse......."
  f8b20  00 02 12 10 4a 32 41 31 00 55 53 42 50 6f 72 74  "....J2A1.USBPort"
  f8b30  31 00 00 08 09 0c 00 01 00 02 12 10 4a 32 41 32  "1...........J2A2"
  f8b40  00 55 53 42 50 6f 72 74 32 00 00 08 09 0d 00 01  ".USBPort2......."
  f8b50  00 02 12 10 4a 32 41 33 00 55 53 42 50 6f 72 74  "....J2A3.USBPort"
  f8b60  33 00 00 08 09 0e 00 01 00 02 12 10 4a 32 41 34  "3...........J2A4"
  f8b70  00 55 53 42 50 6f 72 74 34 00 00 08 09 0f 00 01  ".USBPort4......."
  f8b80  00 02 21 11 4a 33 41 31 00 49 45 45 45 31 33 39  "..!.J3A1.IEEE139"
  f8b90  34 00 00 08 09 10 00 01 00 02 1f 1d 4a 34 41 31  "4...........J4A1"
  f8ba0  00 4d 69 63 20 49 6e 00 00 08 09 11 00 01 00 02  ".Mic In........."
  f8bb0  1f 1d 4a 34 41 32 00 48 65 61 64 20 50 68 6f 6e  "..J4A2.Head Phon"
  f8bc0  65 2f 4c 69 6e 65 20 4f 75 74 00 00 08 09 12 00  "e/Line Out......"
  f8bd0  01 00 02 ff 1d 4a 34 41 33 00 53 2f 50 44 49 46  ".....J4A3.S/PDIF"
  f8be0  20 4f 75 74 00 00 08 09 13 00 01 00 02 08 09 4a  " Out...........J"
  f8bf0  35 41 31 00 53 65 72 69 61 6c 20 50 6f 72 74 00  "5A1.Serial Port."
  f8c00  00 08 09 14 00 01 00 02 10 ff 4a 35 41 32 00 49  "..........J5A2.I"
  f8c10  6e 66 72 61 72 65 64 20 44 65 76 69 63 65 00 00  "nfrared Device.."
  f8c20  08 09 15 00 01 00 02 05 05 4a 35 41 33 00 50 61  ".........J5A3.Pa"
  f8c30  72 61 6c 6c 65 6c 20 50 6f 72 74 00 00 08 09 16  "rallel Port....."
  f8c40  00 01 00 02 07 1c 4a 36 41 31 00 4d 6f 6e 69 74  "......J6A1.Monit"
  f8c50  6f 72 00 00 08 09 17 00 01 00 02 0a 1e 4a 37 41  "or...........J7A"
  f8c60  31 00 54 65 6c 65 70 68 6f 6e 65 20 4c 69 6e 65  "1.Telephone Line"
  f8c70  00 00 08 09 18 00 01 00 02 0b 1f 4a 38 41 31 00  "...........J8A1."
  f8c80  4e 65 74 77 6f 72 6b 00 00 08 09 19 00 01 00 02  "Network........."
  f8c90  ff 00 4a 38 41 32 00 4e 65 74 77 6f 72 6b 20 50  "..J8A2.Network P"
  f8ca0  6f 72 74 00 00 08 09 1a 00 01 00 02 0d 1c 4a 39  "ort...........J9"
  f8cb0  41 31 00 53 2d 56 69 64 65 6f 00 00 09 0d 1b 00  "A1.S-Video......"
  f8cc0  01 07 05 02 01 00 01 b6 01 53 6f 63 6b 65 74 20  ".........Socket "
  f8cd0  31 00 00 09 0d 1c 00 01 07 05 02 01 00 02 b6 01  "1..............."
  f8ce0  53 6f 63 6b 65 74 20 32 00 00 0a 06 1d 00 83 01  "Socket 2........"
  f8cf0  49 6e 74 65 6c 20 56 47 41 00 00 0a 06 1e 00 87  "Intel VGA......."
  f8d00  01 41 44 31 39 38 31 2f 41 44 49 00 00 0a 06 1f  ".AD1981/ADI....."
  f8d10  00 81 01 53 63 6f 72 70 69 6f 2f 4c 75 63 65 74  "...Scorpio/Lucet"
  f8d20  00 00 0a 06 20 00 81 01 52 35 43 35 32 39 2f 52  ".... ...R5C529/R"
  f8d30  69 63 6f 68 00 00 0a 06 21 00 85 01 38 32 35 35  "icoh....!...8255"
  f8d40  31 51 4d 2f 49 6e 74 65 6c 28 31 30 2f 31 30 30  "1QM/Intel(10/100"
  f8d50  29 2f 38 32 35 34 31 45 49 2f 49 6e 74 65 6c 28  ")/82541EI/Intel("
  f8d60  47 62 45 29 00 00 0a 06 22 00 85 01 41 4c 50 53  "GbE)...."...ALPS"
  f8d70  00 00 0b 05 23 00 05 20 20 20 20 20 20 20 20 20  "....#..         "
  f8d80  20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20  "                "
  f8d90  20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20  "                "
  f8da0  20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20  "                "
  f8db0  20 20 20 20 20 20 20 00 20 20 20 20 20 20 20 20  "       .        "
  f8dc0  20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20  "                "
  f8dd0  20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20  "                "
  f8de0  20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20  "                "
  f8df0  20 20 20 20 20 20 20 20 00 20 20 20 20 20 20 20  "        .       "
  f8e00  20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20  "                "
  f8e10  20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20  "                "
  f8e20  20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20  "                "
  f8e30  20 20 20 20 20 20 20 20 20 00 20 20 20 20 20 20  "         .      "
  f8e40  20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20  "                "
  f8e50  20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20  "                "
  f8e60  20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20  "                "
  f8e70  20 20 20 20 20 20 20 20 20 20 00 20 20 20 20 20  "          .     "
  f8e80  20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20  "                "
  f8e90  20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20  "                "
  f8ea0  20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20  "                "
  f8eb0  20 20 20 20 20 20 20 20 20 20 20 00 00 0d 16 24  "           ....$"
  f8ec0  00 02 ff 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  f8ed0  00 00 02 65 6e 7c 55 53 7c 00 6a 61 7c 4a 50 7c  "...en|US|.ja|JP|"
  f8ee0  00 00 10 0f 25 00 03 05 03 00 02 00 00 fe ff 01  "....%..........."
  f8ef0  00 00 00 10 0f 26 00 03 04 03 00 80 00 00 fe ff  ".....&.........."
  f8f00  01 00 00 00 10 0f 27 00 03 03 03 00 00 20 00 fe  "......'...... .."
  f8f10  ff 02 00 00 00 11 17 28 00 27 00 fe ff 04 00 04  ".......(.'......"
  f8f20  00 00 82 01 00 01 02 09 00 10 00 00 55 31 32 00  "............U12."
  f8f30  4e 75 6c 6c 00 00 11 17 29 00 28 00 fe ff 02 00  "Null....).(....."
  f8f40  00 00 20 00 01 00 01 02 12 80 00 c8 00 55 31 42  ".. ..........U1B"
  f8f50  2e 55 31 43 2e 55 31 44 2e 55 31 45 00 4e 75 6c  ".U1C.U1D.U1E.Nul"
  f8f60  6c 00 00 11 17 2a 00 29 00 fe ff 40 00 40 00 00  "l....*.)...@.@.."
  f8f70  01 09 00 01 02 12 02 00 4d 01 44 49 4d 4d 35 30  "........M.DIMM50"
  f8f80  31 00 4e 75 6c 6c 00 00 11 17 2b 00 29 00 fe ff  "1.Null....+.)..."
  f8f90  40 00 40 00 00 01 09 00 01 02 12 02 00 4d 01 44  "@.@..........M.D"
  f8fa0  49 4d 4d 35 30 30 00 4e 75 6c 6c 00 00 13 0f 2c  "IMM500.Null....,"
  f8fb0  00 00 00 00 00 ff 01 00 00 25 00 01 00 00 13 0f  ".........%......"
  f8fc0  2d 00 00 00 00 00 ff ff ff 01 26 00 01 00 00 13  "-.........&....."
  f8fd0  0f 2e 00 00 00 00 00 ff 7f 07 00 27 00 01 00 00  "...........'...."
  f8fe0  14 13 2f 00 00 00 00 00 ff 01 00 00 28 00 2e 00  "../.........(..."
  f8ff0  01 00 00 00 00 14 13 30 00 00 00 00 00 ff fd 01  ".......0........"
  f9000  00 29 00 2f 00 01 00 00 00 00 14 13 31 00 00 00  ".)./........1..."
  f9010  00 00 ff ff 03 00 2a 00 30 00 01 00 00 00 00 14  "......*.0......."
  f9020  13 32 00 00 00 00 00 ff ff 03 00 2b 00 30 00 01  ".2.........+.0.."
  f9030  00 00 00 00 15 07 33 00 06 04 04 00 00 16 1a 34  "......3........4"
  f9040  00 01 02 03 04 05 06 ff ff d0 39 06 ff 00 00 00  "..........9....."
  f9050  00 00 00 00 00 00 00 69 6e 20 74 68 65 20 46 72  ".......in the Fr"
  f9060  6f 6e 74 2c 20 6f 6e 20 74 68 65 20 72 69 67 68  "ont, on the righ"
  f9070  74 2d 68 61 6e 64 20 73 69 64 65 00 45 2d 4d 41  "t-hand side.E-MA"
  f9080  43 48 49 4e 45 00 2e 00 2e 00 4c 69 34 34 30 32  "CHINE.....Li4402"
  f9090  41 00 2e 00 00 20 14 35 00 00 00 00 00 00 00 00  "A.... .5........"
  f90a0  00 00 00 00 00 00 00 00 00 00 00 7f 04 36 00 00  ".............6.."
  f90b0  00  "."
----- SMBIOS Structure Table end -----
  type 0x00 [0x0000]: 00 14 00 00 01 02 00 f0 03 07 90 df b9 7c 00 00 00 00 87 03
       str1: "AMI"
       str2: "NOTE BIOS Version /52.00.12"
       str3: "07/19/2004"
  type 0x01 [0x0001]: 01 19 01 00 01 02 03 04 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 06
       str1: "Gateway"
       str2: "Gateway M520"
       str3: "52.00.12"
       str4: "1101121163"
  type 0x02 [0x0002]: 02 08 02 00 01 02 03 04
       str1: "Gateway"
       str2: "Gateway M520"
       str3: "KBC K52.00.06"
       str4: "0123456789012345"
  type 0x03 [0x0003]: 03 11 03 00 01 0a 02 03 04 02 02 02 02 34 12 00 00
       str1: "Gateway"
       str2: "Rev 1.0"
  type 0x04 [0x0004]: 04 23 04 00 01 03 b2 02 34 0f 00 00 ff fb eb bf 03 8c 15 02 f0 0a 4b 07 41 0f 05 00 06 00 ff ff 04 05 06
       str1: "Socket 478"
       str2: "Intel Corporation"
       str3: "Mobile Intel(R) Pentium(R) 4 CPU 2.80GHz"
       str4: "."
       str5: "."
       str6: "."
  type 0x07 [0x0005]: 07 13 05 00 01 80 01 10 00 10 00 01 00 01 00 00 03 01 05
       str1: "Internal"
  type 0x07 [0x0006]: 07 13 06 00 01 81 01 00 04 00 04 10 00 10 00 00 03 01 01
       str1: "Internal"
  type 0x05 [0x0007]: 05 14 07 00 03 04 03 03 0a 01 00 01 05 00 02 08 00 09 00 02
  type 0x06 [0x0008]: 06 0c 08 00 01 01 00 00 05 88 88 00
       str1: "Memory Slot1"
  type 0x06 [0x0009]: 06 0c 09 00 01 23 00 00 05 88 88 00
       str1: "Memory Slot2"
  type 0x08 [0x000a]: 08 09 0a 00 01 00 02 0f ff
       str1: "J1A1"
       str2: "Keyboard/Mouse"
  type 0x08 [0x000b]: 08 09 0b 00 01 00 02 12 10
       str1: "J2A1"
       str2: "USBPort1"
  type 0x08 [0x000c]: 08 09 0c 00 01 00 02 12 10
       str1: "J2A2"
       str2: "USBPort2"
  type 0x08 [0x000d]: 08 09 0d 00 01 00 02 12 10
       str1: "J2A3"
       str2: "USBPort3"
  type 0x08 [0x000e]: 08 09 0e 00 01 00 02 12 10
       str1: "J2A4"
       str2: "USBPort4"
  type 0x08 [0x000f]: 08 09 0f 00 01 00 02 21 11
       str1: "J3A1"
       str2: "IEEE1394"
  type 0x08 [0x0010]: 08 09 10 00 01 00 02 1f 1d
       str1: "J4A1"
       str2: "Mic In"
  type 0x08 [0x0011]: 08 09 11 00 01 00 02 1f 1d
       str1: "J4A2"
       str2: "Head Phone/Line Out"
  type 0x08 [0x0012]: 08 09 12 00 01 00 02 ff 1d
       str1: "J4A3"
       str2: "S/PDIF Out"
  type 0x08 [0x0013]: 08 09 13 00 01 00 02 08 09
       str1: "J5A1"
       str2: "Serial Port"
  type 0x08 [0x0014]: 08 09 14 00 01 00 02 10 ff
       str1: "J5A2"
       str2: "Infrared Device"
  type 0x08 [0x0015]: 08 09 15 00 01 00 02 05 05
       str1: "J5A3"
       str2: "Parallel Port"
  type 0x08 [0x0016]: 08 09 16 00 01 00 02 07 1c
       str1: "J6A1"
       str2: "Monitor"
  type 0x08 [0x0017]: 08 09 17 00 01 00 02 0a 1e
       str1: "J7A1"
       str2: "Telephone Line"
  type 0x08 [0x0018]: 08 09 18 00 01 00 02 0b 1f
       str1: "J8A1"
       str2: "Network"
  type 0x08 [0x0019]: 08 09 19 00 01 00 02 ff 00
       str1: "J8A2"
       str2: "Network Port"
  type 0x08 [0x001a]: 08 09 1a 00 01 00 02 0d 1c
       str1: "J9A1"
       str2: "S-Video"
  type 0x09 [0x001b]: 09 0d 1b 00 01 07 05 02 01 00 01 b6 01
       str1: "Socket 1"
  type 0x09 [0x001c]: 09 0d 1c 00 01 07 05 02 01 00 02 b6 01
       str1: "Socket 2"
  type 0x0a [0x001d]: 0a 06 1d 00 83 01
       str1: "Intel VGA"
  type 0x0a [0x001e]: 0a 06 1e 00 87 01
       str1: "AD1981/ADI"
  type 0x0a [0x001f]: 0a 06 1f 00 81 01
       str1: "Scorpio/Lucet"
  type 0x0a [0x0020]: 0a 06 20 00 81 01
       str1: "R5C529/Ricoh"
  type 0x0a [0x0021]: 0a 06 21 00 85 01
       str1: "82551QM/Intel(10/100)/82541EI/Intel(GbE)"
  type 0x0a [0x0022]: 0a 06 22 00 85 01
       str1: "ALPS"
  type 0x0b [0x0023]: 0b 05 23 00 05
  type 0x0d [0x0024]: 0d 16 24 00 02 ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02
       str1: "en|US|"
       str2: "ja|JP|"
  type 0x10 [0x0025]: 10 0f 25 00 03 05 03 00 02 00 00 fe ff 01 00
  type 0x10 [0x0026]: 10 0f 26 00 03 04 03 00 80 00 00 fe ff 01 00
  type 0x10 [0x0027]: 10 0f 27 00 03 03 03 00 00 20 00 fe ff 02 00
  type 0x11 [0x0028]: 11 17 28 00 27 00 fe ff 04 00 04 00 00 82 01 00 01 02 09 00 10 00 00
       str1: "U12"
       str2: "Null"
  type 0x11 [0x0029]: 11 17 29 00 28 00 fe ff 02 00 00 00 20 00 01 00 01 02 12 80 00 c8 00
       str1: "U1B.U1C.U1D.U1E"
       str2: "Null"
  type 0x11 [0x002a]: 11 17 2a 00 29 00 fe ff 40 00 40 00 00 01 09 00 01 02 12 02 00 4d 01
       str1: "DIMM501"
       str2: "Null"
  type 0x11 [0x002b]: 11 17 2b 00 29 00 fe ff 40 00 40 00 00 01 09 00 01 02 12 02 00 4d 01
       str1: "DIMM500"
       str2: "Null"
  type 0x13 [0x002c]: 13 0f 2c 00 00 00 00 00 ff 01 00 00 25 00 01
  type 0x13 [0x002d]: 13 0f 2d 00 00 00 00 00 ff ff ff 01 26 00 01
  type 0x13 [0x002e]: 13 0f 2e 00 00 00 00 00 ff 7f 07 00 27 00 01
  type 0x14 [0x002f]: 14 13 2f 00 00 00 00 00 ff 01 00 00 28 00 2e 00 01 00 00
  type 0x14 [0x0030]: 14 13 30 00 00 00 00 00 ff fd 01 00 29 00 2f 00 01 00 00
  type 0x14 [0x0031]: 14 13 31 00 00 00 00 00 ff ff 03 00 2a 00 30 00 01 00 00
  type 0x14 [0x0032]: 14 13 32 00 00 00 00 00 ff ff 03 00 2b 00 30 00 01 00 00
  type 0x15 [0x0033]: 15 07 33 00 06 04 04
  type 0x16 [0x0034]: 16 1a 34 00 01 02 03 04 05 06 ff ff d0 39 06 ff 00 00 00 00 00 00 00 00 00 00
       str1: "in the Front, on the right-hand side"
       str2: "E-MACHINE"
       str3: "."
       str4: "."
       str5: "Li4402A"
       str6: "."
  type 0x20 [0x0035]: 20 14 35 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  type 0x7f [0x0036]: 7f 04 36 00
  smbios: stopped at end tag
>> bios.3: smp
  smp: valid MP FP at 0xff780 (size 0x10, rev 4), MP config at 0xf9280
/dev/mem[0xf9280, 64]: mmap(, 4096,,,, 0xf9000) ok
  MP config table size: 444
/dev/mem[0xf9280, 444]: mmap(, 4096,,,, 0xf9000) ok
  base MP config table (33 entries):
  type 0, len 20
    00 00 14 03 34 0f 00 00 ff fb eb bf 00 00 00 00 00 00 00 00  "....4..............."
  type 1, len 8
    01 00 50 43 49 20 20 20  "..PCI   "
  type 1, len 8
    01 01 50 43 49 20 20 20  "..PCI   "
  type 1, len 8
    01 02 49 53 41 20 20 20  "..ISA   "
  type 2, len 8
    02 02 20 01 00 00 c0 fe  ".. ....."
  type 3, len 8
    03 03 00 00 02 00 02 00  "........"
  type 3, len 8
    03 00 00 00 02 01 02 01  "........"
  type 3, len 8
    03 00 00 00 02 00 02 02  "........"
  type 3, len 8
    03 00 00 00 02 03 02 03  "........"
  type 3, len 8
    03 00 00 00 02 04 02 04  "........"
  type 3, len 8
    03 00 00 00 02 05 02 05  "........"
  type 3, len 8
    03 00 00 00 02 06 02 06  "........"
  type 3, len 8
    03 00 00 00 02 07 02 07  "........"
  type 3, len 8
    03 00 05 00 02 08 02 08  "........"
  type 3, len 8
    03 00 00 00 02 09 02 09  "........"
  type 3, len 8
    03 00 00 00 02 0a 02 0a  "........"
  type 3, len 8
    03 00 00 00 02 0b 02 0b  "........"
  type 3, len 8
    03 00 00 00 02 0c 02 0c  "........"
  type 3, len 8
    03 00 00 00 02 0d 02 0d  "........"
  type 3, len 8
    03 00 00 00 02 0e 02 0e  "........"
  type 3, len 8
    03 00 00 00 02 0f 02 0f  "........"
  type 3, len 8
    03 00 0f 00 00 7c 02 12  ".....|.."
  type 3, len 8
    03 00 0f 00 00 7d 02 11  ".....}.."
  type 3, len 8
    03 00 0f 00 00 74 02 10  ".....t.."
  type 3, len 8
    03 00 0f 00 00 75 02 13  ".....u.."
  type 3, len 8
    03 00 0f 00 00 76 02 12  ".....v.."
  type 3, len 8
    03 00 0f 00 00 77 02 17  ".....w.."
  type 3, len 8
    03 00 0f 00 00 08 02 10  "........"
  type 3, len 8
    03 00 0f 00 01 14 02 11  "........"
  type 3, len 8
    03 00 0f 00 01 18 02 13  "........"
  type 3, len 8
    03 00 0f 00 01 24 02 12  ".....$.."
  type 4, len 8
    04 03 00 00 00 00 ff 00  "........"
  type 4, len 8
    04 01 00 00 00 00 ff 01  "........"
  extended MP config table:
  type 128, len 20
    80 14 00 00 00 e0 00 00 00 00 00 00 00 10 00 00 00 00 00 00  "...................."
  type 128, len 20
    80 14 00 00 00 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00  "...................."
  type 128, len 20
    80 14 00 01 00 00 0a 00 00 00 00 00 00 00 02 00 00 00 00 00  "...................."
  type 128, len 20
    80 14 00 01 00 00 00 e0 00 00 00 00 00 00 40 00 00 00 00 00  "..............@....."
  type 128, len 20
    80 14 00 02 00 00 f0 bf 00 00 00 00 00 00 10 20 00 00 00 00  "............... ...."
  type 129, len 8
    81 08 02 01 00 00 00 00  "........"
  type 130, len 8
    82 08 00 00 00 00 00 00  "........"
  type 130, len 8
    82 08 00 00 01 00 00 00  "........"
----- BIOS data 0x00400 - 0x004ff -----
  400  00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0 9f  "................"
  410  26 00 20 7f 02 95 00 00 00 00 1e 00 1e 00 00 00  "&. ............."
  420  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  430  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  440  00 20 00 00 00 00 00 00 00 03 50 00 00 10 00 00  ". ........P....."
  450  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  460  0e 0d 00 d4 03 29 30 00 00 00 00 00 fa 0f 06 00  ".....)0........."
  470  00 00 00 00 00 01 08 00 14 14 14 14 01 01 01 01  "................"
  480  1e 00 3e 00 18 10 00 60 09 11 08 00 50 01 00 00  "..>....`....P..."
  490  00 00 00 00 00 00 10 10 00 00 00 00 00 00 00 00  "................"
  4a0  00 00 00 00 00 00 00 00 59 00 00 c0 00 00 00 00  "........Y......."
  4b0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  4c0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  4d0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  4e0  04 c8 00 00 00 00 00 00 00 00 60 00 00 00 00 00  "..........`....."
  4f0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
----- BIOS data end -----
----- EBDA 0x9fc00 - 0x9ffff -----
  9fc00  01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  9fc10  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  9fc20  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  9fc30  00 00 00 00 00 00 00 00 00 00 00 00 00 13 0f ff  "................"
  9fc40  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  9fc50  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  9fc60  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  9fc70  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  9fc80  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  9fc90  01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  9fca0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  9fcb0  00 00 00 92 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  9fcc0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  9fcd0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  9fce0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  9fcf0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  9fd00  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  9fd10  00 7e 00 00 00 00 00 00 00 70 00 00 11 00 01 00  ".~.......p......"
  9fd20  00 00 07 00 00 7e 00 80 00 00 00 00 00 00 00 00  ".....~.........."
  9fd30  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  9fd40  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  9fd50  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  9fd60  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  9fd70  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  9fd80  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  9fd90  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  9fda0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  9fdb0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  9fdc0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  9fdd0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  9fde0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  9fdf0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  9fe00  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  9fe10  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  9fe20  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  9fe30  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  9fe40  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  9fe50  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  9fe60  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  9fe70  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  9fe80  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  9fe90  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  9fea0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  9feb0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  9fec0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  9fed0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  9fee0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  9fef0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  9ff00  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  9ff10  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  9ff20  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  9ff30  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  9ff40  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  9ff50  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  9ff60  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  9ff70  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  9ff80  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  9ff90  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  9ffa0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  9ffb0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  9ffc0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  9ffd0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  9ffe0  80 f2 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  9fff0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
----- EBDA end -----
/dev/mem[0xff780, 16]: mmap(, 4096,,,, 0xff000) ok
----- MP FP 0xff780 - 0xff78f -----
  ff780  5f 4d 50 5f 80 92 0f 00 01 04 7f 00 00 00 00 00  "_MP_............"
----- MP FP end -----
/dev/mem[0xf9280, 444]: mmap(, 4096,,,, 0xf9000) ok
----- MP config table 0xf9280 - 0xf943b -----
  f9280  50 43 4d 50 40 01 04 84 54 45 4d 50 4c 41 54 45  "PCMP@...TEMPLATE"
  f9290  45 54 45 4d 50 4c 41 54 45 20 20 20 00 00 00 00  "ETEMPLATE   ...."
  f92a0  00 00 21 00 00 00 e0 fe 7c 00 7b 00 00 00 14 03  "..!.....|.{....."
  f92b0  34 0f 00 00 ff fb eb bf 00 00 00 00 00 00 00 00  "4..............."
  f92c0  01 00 50 43 49 20 20 20 01 01 50 43 49 20 20 20  "..PCI   ..PCI   "
  f92d0  01 02 49 53 41 20 20 20 02 02 20 01 00 00 c0 fe  "..ISA   .. ....."
  f92e0  03 03 00 00 02 00 02 00 03 00 00 00 02 01 02 01  "................"
  f92f0  03 00 00 00 02 00 02 02 03 00 00 00 02 03 02 03  "................"
  f9300  03 00 00 00 02 04 02 04 03 00 00 00 02 05 02 05  "................"
  f9310  03 00 00 00 02 06 02 06 03 00 00 00 02 07 02 07  "................"
  f9320  03 00 05 00 02 08 02 08 03 00 00 00 02 09 02 09  "................"
  f9330  03 00 00 00 02 0a 02 0a 03 00 00 00 02 0b 02 0b  "................"
  f9340  03 00 00 00 02 0c 02 0c 03 00 00 00 02 0d 02 0d  "................"
  f9350  03 00 00 00 02 0e 02 0e 03 00 00 00 02 0f 02 0f  "................"
  f9360  03 00 0f 00 00 7c 02 12 03 00 0f 00 00 7d 02 11  ".....|.......}.."
  f9370  03 00 0f 00 00 74 02 10 03 00 0f 00 00 75 02 13  ".....t.......u.."
  f9380  03 00 0f 00 00 76 02 12 03 00 0f 00 00 77 02 17  ".....v.......w.."
  f9390  03 00 0f 00 00 08 02 10 03 00 0f 00 01 14 02 11  "................"
  f93a0  03 00 0f 00 01 18 02 13 03 00 0f 00 01 24 02 12  ".............$.."
  f93b0  04 03 00 00 00 00 ff 00 04 01 00 00 00 00 ff 01  "................"
  f93c0  80 14 00 00 00 e0 00 00 00 00 00 00 00 10 00 00  "................"
  f93d0  00 00 00 00 80 14 00 00 00 00 00 00 00 00 00 00  "................"
  f93e0  00 01 00 00 00 00 00 00 80 14 00 01 00 00 0a 00  "................"
  f93f0  00 00 00 00 00 00 02 00 00 00 00 00 80 14 00 01  "................"
  f9400  00 00 00 e0 00 00 00 00 00 00 40 00 00 00 00 00  "..........@....."
  f9410  80 14 00 02 00 00 f0 bf 00 00 00 00 00 00 10 20  "............... "
  f9420  00 00 00 00 81 08 02 01 00 00 00 00 82 08 00 00  "................"
  f9430  00 00 00 00 82 08 00 00 01 00 00 00  "............"
----- MP config table end -----
>> bios.4: vbe
/dev/mem[0xc0000, 3]: mmap(, 4096,,,, 0xc0000) ok
/dev/mem[0xc0000, 50688]: mmap(, 53248,,,, 0xc0000) ok
/dev/mem[0x0, 4096]: mmap(, 4096,,,, 0x0) ok
  vbe: int 10h points to c000:0014: e9 85 1d 2d 40 00 90 0b
>> bios.4.1: vbe info
vm86: using CPU emulation
>> bios.5: 32
>> bios.6: acpi
>> sys.1: cpu
  vm check: vm_1 = 0, vm_2 = 0
  is_vmware = 0, has_vmware_mouse = 0
>> misc.9: kernel log
----- kernel log -----
  <6>[   13.260239] Linux agpgart interface v0.103
  <6>[   13.286410] agpgart-intel 0000:00:00.0: Intel 855GM Chipset
  <6>[   13.287175] agpgart-intel 0000:00:00.0: detected 32636K stolen memory
  <6>[   13.289956] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xd8000000
  <6>[   13.461385] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:12/input/input7
  <6>[   13.492001] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
  <6>[   13.649183] iTCO_vendor_support: vendor-support=0
  <6>[   13.674887] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
  <6>[   13.675313] iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x0460)
  <6>[   13.675567] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
  <6>[   13.720057] yenta_cardbus 0000:01:05.0: CardBus bridge found [161f:202f]
  <6>[   13.720091] yenta_cardbus 0000:01:05.0: Enabling burst memory read transactions
  <6>[   13.720103] yenta_cardbus 0000:01:05.0: Using CSCINT to route CSC interrupts to PCI
  <6>[   13.720110] yenta_cardbus 0000:01:05.0: Routing CardBus interrupts to PCI
  <6>[   13.720122] yenta_cardbus 0000:01:05.0: TI: mfunc 0x01001002, devctl 0x64
  <6>[   13.764348] cfg80211: Calling CRDA to update world regulatory domain
  <6>[   13.871199] cfg80211: World regulatory domain updated:
  <6>[   13.871207] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  <6>[   13.871213] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  <6>[   13.871218] 	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  <6>[   13.871223] 	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  <6>[   13.871227] 	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  <6>[   13.871232] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  <6>[   13.953485] yenta_cardbus 0000:01:05.0: ISA IRQ mask 0x0cf8, PCI irq 17
  <6>[   13.953493] yenta_cardbus 0000:01:05.0: Socket status: 30000007
  <6>[   13.953500] pci_bus 0000:01: Raising subordinate bus# of parent bus (#01) from #01 to #05
  <6>[   13.953513] yenta_cardbus 0000:01:05.0: pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
  <6>[   13.953519] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x2000-0x2fff: clean.
  <6>[   13.953937] yenta_cardbus 0000:01:05.0: pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xe00fffff
  <6>[   13.953943] yenta_cardbus 0000:01:05.0: pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x25ffffff
  <6>[   14.030274] b43-phy0: Broadcom 4306 WLAN found
  <6>[   14.034160] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x236eb3, caps: 0x904713/0x10008
  <6>[   14.074155] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
  <7>[   14.085346] phy0: Selected rate control algorithm 'pid'
  <6>[   14.282472] Broadcom 43xx driver loaded [ Features: PLR, Firmware-ID: FW13 ]
  <3>[   14.315866] snd_intel8x0: Unknown parameter `model'
  <6>[   14.359372] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
  <6>[   14.361418] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
  <6>[   14.361938] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
  <6>[   14.362679] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
  <6>[   14.363750] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
  <3>[   14.415325] snd_intel8x0: Unknown parameter `model'
  <6>[   14.647439] lp: driver loaded but no devices found
  <3>[   14.659382] snd_intel8x0: Unknown parameter `model'
  <6>[   14.884117] Adding 1397612k swap on /dev/sda5.  Priority:-1 extents:1 across:1397612k
  <6>[   50.013066] usb 3-1: new low speed USB device using uhci_hcd and address 2
  <6>[   50.216139] usb 3-1: configuration #1 chosen from 1 choice
  <6>[   50.432247] usbcore: registered new interface driver hiddev
  <6>[   50.471415] input: HID 04d9:0499 as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input9
  <6>[   50.472774] generic-usb 0003:04D9:0499.0001: input,hidraw0: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:1d.1-1/input0
  <6>[   50.472825] usbcore: registered new interface driver usbhid
  <6>[   50.472836] usbhid: v2.6:USB HID core driver
  <4>[   69.515714] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
  <6>[   69.515990] EXT3 FS on sda1, internal journal
  <5>[   71.416112] type=1505 audit(1258005894.863:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2633
  <5>[   71.501545] type=1505 audit(1258005894.947:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2637
  <5>[   71.501772] type=1505 audit(1258005894.947:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2637
  <5>[   71.501861] type=1505 audit(1258005894.947:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2637
  <5>[   71.501940] type=1505 audit(1258005894.947:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2637
  <5>[   71.736401] type=1505 audit(1258005895.183:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2642
  <5>[   71.736712] type=1505 audit(1258005895.183:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2642
  <5>[   71.800561] type=1505 audit(1258005895.247:9): operation="profile_load" name="/usr/sbin/named" name2="default" pid=2646
  <5>[   71.850015] type=1505 audit(1258005895.295:10): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2650
  <4>[   72.846886] DLM (built Oct 20 2009 20:01:31) installed
  <4>[   72.902246] GFS2 (built Oct 20 2009 20:02:12) installed
  <6>[   72.916437] Lock_DLM (built Oct 20 2009 20:02:29) installed
  <5>[   88.604668] Bridge firewalling registered
  <6>[   88.800159] virbr0: starting userspace STP failed, starting kernel STP
  <6>[   89.482722] ip_tables: (C) 2000-2006 Netfilter Core Team
  <6>[   89.900581] ipmi message handler version 39.2
  <4>[   90.557858] nf_conntrack version 0.5.0 (7677 buckets, 30708 max)
  <4>[   90.559281] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
  <4>[   90.559293] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
  <4>[   90.559302] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
  <6>[   90.940425] [drm] Initialized drm 1.1.0 20060810
  <6>[   91.179599] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  <7>[   91.179609] pci 0000:00:02.0: setting latency timer to 64
  <6>[   91.179883] [drm] Initialized i915 1.6.0 20080730 on minor 0
  <3>[   91.185127] [drm:i915_setparam] *ERROR* unknown parameter 4
  <3>[   91.185199] [drm:i915_getparam] *ERROR* Unknown parameter 6
  <3>[   92.445008] [drm:i915_getparam] *ERROR* Unknown parameter 6
  <6>[   93.769125] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  <6>[   93.769132] Bluetooth: BNEP filters: protocol multicast
  <7>[   98.929019] virbr0: no IPv6 routers present
  <6>[  101.339186] ppdev: user-space parallel port driver
  <6>[  103.557616] ADDRCONF(NETDEV_UP): eth0: link is not ready
  <6>[  103.800306] input: b43-phy0 as /devices/virtual/input/input10
  <6>[  103.832041] b43 ssb0:0: firmware: requesting b43/ucode5.fw
  <6>[  104.050489] b43 ssb0:0: firmware: requesting b43/pcm5.fw
  <6>[  104.106101] b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw
  <6>[  104.130605] b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw
  <6>[  104.328033] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
  <6>[  104.390102] Registered led device: b43-phy0::tx
  <6>[  104.392284] Registered led device: b43-phy0::rx
  <6>[  104.392369] Registered led device: b43-phy0::radio
  <6>[  104.413048] b43-phy0: Radio turned on by software
  <6>[  104.413278] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  <7>[  140.472647] wlan0: authenticate with AP 00:23:69:4f:cd:87
  <7>[  140.477664] wlan0: authenticated
  <7>[  140.477677] wlan0: associate with AP 00:23:69:4f:cd:87
  <7>[  140.479685] wlan0: RX AssocResp from 00:23:69:4f:cd:87 (capab=0x411 status=0 aid=1)
  <7>[  140.479692] wlan0: associated
  <6>[  140.479920] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  <7>[  150.880013] wlan0: no IPv6 routers present
----- kernel log end -----
>> misc.1: misc data
>> misc.1.1: open serial
>> misc.1.2: open parallel
----- exec: "/sbin/rmmod lp" -----
----- return code: ? -----
----- exec: "/sbin/rmmod parport" -----
  ERROR: Module parport is in use by ppdev
----- return code: ? -----
----- exec: "/sbin/modprobe parport_pc " -----
  WARNING: All config files need .conf: /etc/modprobe.d/sound.save, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/oss-compat, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.save.3, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alda-base, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.save, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.conf.save, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.save.2, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.save.1, it will be ignored in a future release.
  WARNING: /etc/modprobe.d/alsa-base.save.1 line 1: ignoring bad line starting with '"options'
  WARNING: /etc/modprobe.d/alsa-base.save.2 line 1: ignoring bad line starting with '^0"options'
----- return code: ? -----
>> misc.2.1: io
>> misc.2.2: dma
>> misc.2.3: irq
----- /proc/ioports -----
  0000-001f : dma1
  0020-0021 : pic1
  0040-0043 : timer0
  0050-0053 : timer1
  0060-0060 : keyboard
  0064-0064 : keyboard
  0070-0071 : rtc0
  0080-008f : dma page reg
  00a0-00a1 : pic2
  00c0-00df : dma2
  00f0-00ff : fpu
  0170-0177 : 0000:00:1f.1
    0170-0177 : ata_piix
  01f0-01f7 : 0000:00:1f.1
    01f0-01f7 : ata_piix
  0376-0376 : 0000:00:1f.1
    0376-0376 : ata_piix
  03c0-03df : vga+
  03f6-03f6 : 0000:00:1f.1
    03f6-03f6 : ata_piix
  0400-047f : 0000:00:1f.0
    0400-047f : pnp 00:05
      0400-0403 : ACPI PM1a_EVT_BLK
      0404-0405 : ACPI PM1a_CNT_BLK
      0408-040b : ACPI PM_TMR
      0410-0415 : ACPI CPU throttle
      0420-0420 : ACPI PM2_CNT_BLK
      0428-042f : ACPI GPE0_BLK
      0430-0433 : iTCO_wdt
      0460-047f : iTCO_wdt
  04d0-04d1 : pnp 00:05
  0500-053f : 0000:00:1f.0
    0500-053f : pnp 00:05
  0800-080f : pnp 00:05
  0cf8-0cff : PCI conf1
  1100-113f : pnp 00:08
  1254-1254 : pnp 00:08
  12d4-12d4 : pnp 00:08
  1300-1375 : pnp 00:08
  1376-1376 : pnp 00:08
  1377-137f : pnp 00:08
  2000-2fff : PCI Bus 0000:01
    2000-20ff : PCI CardBus 0000:02
    2400-24ff : PCI CardBus 0000:02
  e400-e4ff : 0000:00:1f.5
  e800-e8ff : 0000:00:1f.6
  ec00-ec7f : 0000:00:1f.6
  ee80-eebf : 0000:00:1f.5
  ef20-ef3f : 0000:00:1d.0
    ef20-ef3f : uhci_hcd
  ef40-ef5f : 0000:00:1d.1
    ef40-ef5f : uhci_hcd
  ef80-ef9f : 0000:00:1d.2
    ef80-ef9f : uhci_hcd
  eff0-eff7 : 0000:00:02.0
  ffa0-ffaf : 0000:00:1f.1
    ffa0-ffaf : ata_piix
----- /proc/ioports end -----
----- /proc/interrupts -----
    0:        169          0   IO-APIC-edge      timer
    1:       2913          0   IO-APIC-edge      i8042
    8:          0          0   IO-APIC-edge      rtc0
    9:        113          0   IO-APIC-fasteoi   acpi
   12:    1266312          0   IO-APIC-edge      i8042
   14:     144919          0   IO-APIC-edge      ata_piix
   15:      19620          0   IO-APIC-edge      ata_piix
   16:       1280          0   IO-APIC-fasteoi   uhci_hcd:usb2
   17:          1          0   IO-APIC-fasteoi   yenta
   18:      48035          0   IO-APIC-fasteoi   uhci_hcd:usb4, b43
   19:      59378          0   IO-APIC-fasteoi   uhci_hcd:usb3, eth0
   23:          2          0   IO-APIC-fasteoi   ehci_hcd:usb1
  NMI:          0          0   Non-maskable interrupts
  LOC:    1845801    2234403   Local timer interrupts
  RES:      64553     102085   Rescheduling interrupts
  CAL:         73        137   Function call interrupts
  TLB:       7255      21264   TLB shootdowns
  SPU:          0          0   Spurious interrupts
  ERR:          0
  MIS:          0
----- /proc/interrupts end -----
----- /proc/dma -----
   4: cascade
----- /proc/dma end -----
>> misc.3: FPU
>> misc.3.1: DMA
>> misc.3.2: PIC
>> misc.3.3: timer
>> misc.3.4: RTC
>> cpu.1: cpuinfo
----- /proc/cpuinfo -----
  processor	: 0
  vendor_id	: GenuineIntel
  cpu family	: 15
  model		: 3
  model name	: Mobile Intel(R) Pentium(R) 4 CPU 2.80GHz
  stepping	: 4
  cpu MHz		: 2790.863
  cache size	: 1024 KB
  physical id	: 0
  siblings	: 2
  core id		: 0
  cpu cores	: 1
  apicid		: 0
  initial apicid	: 0
  fdiv_bug	: no
  hlt_bug		: no
  f00f_bug	: no
  coma_bug	: no
  fpu		: yes
  fpu_exception	: yes
  cpuid level	: 5
  wp		: yes
  flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe constant_tsc pebs bts pni dtes64 monitor ds_cpl est tm2 cid xtpr
  bogomips	: 5581.72
  clflush size	: 64
  power management:

  processor	: 1
  vendor_id	: GenuineIntel
  cpu family	: 15
  model		: 3
  model name	: Mobile Intel(R) Pentium(R) 4 CPU 2.80GHz
  stepping	: 4
  cpu MHz		: 2790.863
  cache size	: 1024 KB
  physical id	: 0
  siblings	: 2
  core id		: 0
  cpu cores	: 1
  apicid		: 1
  initial apicid	: 1
  fdiv_bug	: no
  hlt_bug		: no
  f00f_bug	: no
  coma_bug	: no
  fpu		: yes
  fpu_exception	: yes
  cpuid level	: 5
  wp		: yes
  flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe constant_tsc pebs bts pni dtes64 monitor ds_cpl est tm2 cid xtpr
  bogomips	: 5581.80
  clflush size	: 64
  power management:

----- /proc/cpuinfo end -----
>> memory.1: main memory size
  kcore mem:  0x1dfd0000
  klog mem 0: 0x0
  klog mem 1: 0x0
  klog mem:   0x0
  bios mem:   0x0
  meminfo:    0x1d1be000
>> pci.1: sysfs drivers
----- sysfs driver list (id 0x71d32e86d9592d02) -----
      serial8250: /devices/platform/serial8250
           i8042: /devices/platform/i8042
          pcspkr: /devices/platform/pcspkr
          pcspkr: module = pcspkr
        iTCO_wdt: module = iTCO_wdt
        iTCO_wdt: /devices/platform/iTCO_wdt
      parport_pc: module = parport_pc
            ahci: module = ahci
        ata_piix: /devices/pci0000:00/0000:00:1f.1
        sata_sil: module = sata_sil
         sata_nv: module = sata_nv
        pata_ali: module = pata_ali
     pata_cs5536: module = pata_cs5536
     pata_it821x: module = pata_it821x
        ehci_hcd: /devices/pci0000:00/0000:00:1d.7
        ehci_hcd: module = ehci_hcd
        uhci_hcd: /devices/pci0000:00/0000:00:1d.0
        uhci_hcd: /devices/pci0000:00/0000:00:1d.1
        uhci_hcd: /devices/pci0000:00/0000:00:1d.2
        uhci_hcd: module = uhci_hcd
  b43-pci-bridge: /devices/pci0000:00/0000:00:1e.0/0000:01:09.0
  b43-pci-bridge: module = ssb
             b44: /devices/pci0000:00/0000:00:1e.0/0000:01:06.0
             b44: module = ssb
          shpchp: module = shpchp
   agpgart-intel: /devices/pci0000:00/0000:00:00.0
   agpgart-intel: module = intel_agp
   yenta_cardbus: /devices/pci0000:00/0000:00:1e.0/0000:01:05.0
   yenta_cardbus: module = yenta_socket
       HDA Intel: module = snd_hda_intel
      parport_pc: module = parport_pc
              ec: /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:11/PNP0C09:00
        pci_root: /devices/LNXSYSTM:00/device:00/PNP0A03:00
        pci_link: /devices/LNXSYSTM:00/device:00/PNP0C0F:00
        pci_link: /devices/LNXSYSTM:00/device:00/PNP0C0F:01
        pci_link: /devices/LNXSYSTM:00/device:00/PNP0C0F:02
        pci_link: /devices/LNXSYSTM:00/device:00/PNP0C0F:03
        pci_link: /devices/LNXSYSTM:00/device:00/PNP0C0F:04
        pci_link: /devices/LNXSYSTM:00/device:00/PNP0C0F:05
        pci_link: /devices/LNXSYSTM:00/device:00/PNP0C0F:06
        pci_link: /devices/LNXSYSTM:00/device:00/PNP0C0F:07
              ac: /devices/LNXSYSTM:00/device:00/ACPI0003:00
         battery: /devices/LNXSYSTM:00/device:00/PNP0C0A:00
          button: /devices/LNXSYSTM:00/LNXPWRBN:00
          button: /devices/LNXSYSTM:00/device:00/PNP0C0D:00
          button: /devices/LNXSYSTM:00/device:00/PNP0C0E:00
          button: /devices/LNXSYSTM:00/device:00/PNP0C0C:00
       processor: /devices/LNXSYSTM:00/ACPI_CPU:00
       processor: /devices/LNXSYSTM:00/ACPI_CPU:01
         thermal: /devices/LNXSYSTM:00/LNXTHERM:00/LNXTHERM:01
           video: /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:12
          system: /devices/pnp0/00:05
          system: /devices/pnp0/00:07
          system: /devices/pnp0/00:08
          system: /devices/pnp0/00:0b
       i8042 kbd: /devices/pnp0/00:09
       i8042 aux: /devices/pnp0/00:0a
        rtc_cmos: /devices/pnp0/00:02
              sd: /devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0
              sr: /devices/pci0000:00/0000:00:1f.1/host1/target1:0:0/1:0:0:0
           usbfs: module = usbcore
             hub: module = usbcore
             hub: /devices/pci0000:00/0000:00:1d.7/usb1/1-0:1.0
             hub: /devices/pci0000:00/0000:00:1d.0/usb2/2-0:1.0
             hub: /devices/pci0000:00/0000:00:1d.1/usb3/3-0:1.0
             hub: /devices/pci0000:00/0000:00:1d.2/usb4/4-0:1.0
             usb: /devices/pci0000:00/0000:00:1d.7/usb1
             usb: /devices/pci0000:00/0000:00:1d.0/usb2
             usb: /devices/pci0000:00/0000:00:1d.1/usb3
             usb: /devices/pci0000:00/0000:00:1d.2/usb4
             usb: /devices/pci0000:00/0000:00:1d.1/usb3/3-1
          hiddev: module = usbhid
          usbhid: /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0
          usbhid: module = usbhid
           atkbd: /devices/platform/i8042/serio0
       serio_raw: module = serio_raw
         psmouse: module = psmouse
         psmouse: /devices/platform/i8042/serio1
     generic-usb: module = usbhid
     generic-usb: /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/0003:04D9:0499.0001
             b44: /devices/pci0000:00/0000:00:1e.0/0000:01:06.0/ssb1:0
             b44: module = b44
             b43: /devices/pci0000:00/0000:00:1e.0/0000:01:09.0/ssb0:0
             b43: module = b43
----- sysfs driver list end -----
>> pci.2: get sysfs pci data
  pci device: name = 0000:01:09.0
    path = /devices/pci0000:00/0000:00:1e.0/0000:01:09.0
    modalias = "pci:v000014E4d00004320sv000014E4sd00000418bc02sc80i00"
    class = 0x28000
    vendor = 0x14e4
    device = 0x4320
    subvendor = 0x14e4
    subdevice = 0x418
    irq = 18
    res[0] = 0xe00fc000 0xe00fdfff 0x20200
    config[64]
  pci device: name = 0000:01:06.0
    path = /devices/pci0000:00/0000:00:1e.0/0000:01:06.0
    modalias = "pci:v000014E4d00004401sv0000161Fsd00002029bc02sc00i00"
    class = 0x20000
    vendor = 0x14e4
    device = 0x4401
    subvendor = 0x161f
    subdevice = 0x2029
    irq = 19
    res[0] = 0xe00fe000 0xe00fffff 0x20200
    res[6] = 0x24000000 0x2401ffff 0x27200
    config[64]
  pci device: name = 0000:01:05.0
    path = /devices/pci0000:00/0000:00:1e.0/0000:01:05.0
    modalias = "pci:v0000104Cd0000AC56sv0000161Fsd0000202Fbc06sc07i00"
    class = 0x60700
    vendor = 0x104c
    device = 0xac56
    subvendor = 0x161f
    subdevice = 0x202f
    irq = 17
    res[0] = 0xe0000000 0xe0000fff 0x20200
    config[64]
  pci device: name = 0000:00:1f.6
    path = /devices/pci0000:00/0000:00:1f.6
    modalias = "pci:v00008086d000024C6sv0000161Fsd0000202Fbc07sc03i00"
    class = 0x70300
    vendor = 0x8086
    device = 0x24c6
    subvendor = 0x161f
    subdevice = 0x202f
    irq = 17
    res[0] = 0xe800 0xe8ff 0x20101
    res[1] = 0xec00 0xec7f 0x20101
    config[64]
  pci device: name = 0000:00:1f.5
    path = /devices/pci0000:00/0000:00:1f.5
    modalias = "pci:v00008086d000024C5sv0000161Fsd0000202Fbc04sc01i00"
    class = 0x40100
    vendor = 0x8086
    device = 0x24c5
    subvendor = 0x161f
    subdevice = 0x202f
    irq = 3
    res[0] = 0xe400 0xe4ff 0x20101
    res[1] = 0xee80 0xeebf 0x20101
    res[2] = 0xe02ff800 0xe02ff9ff 0x20200
    res[3] = 0xe02ff400 0xe02ff4ff 0x20200
    config[64]
  pci device: name = 0000:00:1f.1
    path = /devices/pci0000:00/0000:00:1f.1
    modalias = "pci:v00008086d000024CAsv0000161Fsd0000202Fbc01sc01i8a"
    class = 0x1018a
    vendor = 0x8086
    device = 0x24ca
    subvendor = 0x161f
    subdevice = 0x202f
    irq = 18
    res[0] = 0x1f0 0x1f7 0x110
    res[1] = 0x3f6 0x3f6 0x110
    res[2] = 0x170 0x177 0x110
    res[3] = 0x376 0x376 0x110
    res[4] = 0xffa0 0xffaf 0x20101
    res[5] = 0x26000000 0x260003ff 0x20200
    config[64]
  pci device: name = 0000:00:1f.0
    path = /devices/pci0000:00/0000:00:1f.0
    modalias = "pci:v00008086d000024CCsv00000000sd00000000bc06sc01i00"
    class = 0x60100
    vendor = 0x8086
    device = 0x24cc
    subvendor = 0x0
    subdevice = 0x0
    irq = 0
    config[64]
  pci device: name = 0000:00:1e.0
    path = /devices/pci0000:00/0000:00:1e.0
    modalias = "pci:v00008086d00002448sv00000000sd00000000bc06sc04i00"
    class = 0x60400
    vendor = 0x8086
    device = 0x2448
    subvendor = 0x0
    subdevice = 0x0
    irq = 0
    config[64]
  pci device: name = 0000:00:1d.7
    path = /devices/pci0000:00/0000:00:1d.7
    modalias = "pci:v00008086d000024CDsv0000161Fsd0000202Fbc0Csc03i20"
    class = 0xc0320
    vendor = 0x8086
    device = 0x24cd
    subvendor = 0x161f
    subdevice = 0x202f
    irq = 23
    res[0] = 0xe02ffc00 0xe02fffff 0x20200
    config[64]
  pci device: name = 0000:00:1d.2
    path = /devices/pci0000:00/0000:00:1d.2
    modalias = "pci:v00008086d000024C7sv0000161Fsd0000202Fbc0Csc03i00"
    class = 0xc0300
    vendor = 0x8086
    device = 0x24c7
    subvendor = 0x161f
    subdevice = 0x202f
    irq = 18
    res[4] = 0xef80 0xef9f 0x20101
    config[64]
  pci device: name = 0000:00:1d.1
    path = /devices/pci0000:00/0000:00:1d.1
    modalias = "pci:v00008086d000024C4sv0000161Fsd0000202Fbc0Csc03i00"
    class = 0xc0300
    vendor = 0x8086
    device = 0x24c4
    subvendor = 0x161f
    subdevice = 0x202f
    irq = 19
    res[4] = 0xef40 0xef5f 0x20101
    config[64]
  pci device: name = 0000:00:1d.0
    path = /devices/pci0000:00/0000:00:1d.0
    modalias = "pci:v00008086d000024C2sv0000161Fsd0000202Fbc0Csc03i00"
    class = 0xc0300
    vendor = 0x8086
    device = 0x24c2
    subvendor = 0x161f
    subdevice = 0x202f
    irq = 16
    res[4] = 0xef20 0xef3f 0x20101
    config[64]
  pci device: name = 0000:00:02.1
    path = /devices/pci0000:00/0000:00:02.1
    modalias = "pci:v00008086d00003582sv0000161Fsd0000202Fbc03sc80i00"
    class = 0x38000
    vendor = 0x8086
    device = 0x3582
    subvendor = 0x161f
    subdevice = 0x202f
    irq = 0
    res[0] = 0xd0000000 0xd7ffffff 0x21208
    res[1] = 0xe0300000 0xe037ffff 0x20200
    config[64]
  pci device: name = 0000:00:02.0
    path = /devices/pci0000:00/0000:00:02.0
    modalias = "pci:v00008086d00003582sv0000161Fsd0000202Fbc03sc00i00"
    class = 0x30000
    vendor = 0x8086
    device = 0x3582
    subvendor = 0x161f
    subdevice = 0x202f
    irq = 16
    res[0] = 0xd8000000 0xdfffffff 0x21208
    res[1] = 0xe0380000 0xe03fffff 0x20200
    res[2] = 0xeff0 0xeff7 0x20101
    config[64]
  pci device: name = 0000:00:00.3
    path = /devices/pci0000:00/0000:00:00.3
    modalias = "pci:v00008086d00003585sv0000161Fsd0000202Fbc08sc80i00"
    class = 0x88000
    vendor = 0x8086
    device = 0x3585
    subvendor = 0x161f
    subdevice = 0x202f
    irq = 0
    config[64]
  pci device: name = 0000:00:00.1
    path = /devices/pci0000:00/0000:00:00.1
    modalias = "pci:v00008086d00003584sv0000161Fsd0000202Fbc08sc80i00"
    class = 0x88000
    vendor = 0x8086
    device = 0x3584
    subvendor = 0x161f
    subdevice = 0x202f
    irq = 0
    config[64]
  pci device: name = 0000:00:00.0
    path = /devices/pci0000:00/0000:00:00.0
    modalias = "pci:v00008086d00003580sv0000161Fsd0000202Fbc06sc00i00"
    class = 0x60000
    vendor = 0x8086
    device = 0x3580
    subvendor = 0x161f
    subdevice = 0x202f
    irq = 0
    config[64]
---------- PCI raw data ----------
bus 01, slot 09, func 0, vend:dev:s_vend:s_dev:rev 14e4:4320:14e4:0418:03
class 02, sub_class 80 prog_if 00, hdr 0, flags <>, irq 18
  addr0 e00fc000, size 00002000
  00: e4 14 20 43 06 01 00 00 03 00 80 02 00 40 00 00  ".. C.........@.."
  10: 00 c0 0f e0 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  20: 00 00 00 00 00 00 00 00 00 00 00 00 e4 14 18 04  "................"
  30: 00 00 00 00 00 00 00 00 00 00 00 00 09 01 00 00  "................"

bus 01, slot 06, func 0, vend:dev:s_vend:s_dev:rev 14e4:4401:161f:2029:01
class 02, sub_class 00 prog_if 00, hdr 0, flags <pm>, irq 19
  addr0 e00fe000, size 00002000
  00: e4 14 01 44 06 01 10 08 01 00 00 02 00 40 00 00  "...D.........@.."
  10: 00 e0 0f e0 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  20: 00 00 00 00 00 00 00 00 00 00 00 00 1f 16 29 20  "..............) "
  30: 00 00 0c e0 40 00 00 00 00 00 00 00 05 01 00 00  "....@..........."
  40: 01 00  ".."

bus 01->02, slot 05, func 0, vend:dev:s_vend:s_dev:rev 104c:ac56:161f:202f:00
class 06, sub_class 07 prog_if 00, hdr 2, flags <>, irq 17
  addr0 e0000000, size 00001000
  00: 4c 10 56 ac 07 00 10 02 00 00 07 06 20 a8 02 00  "L.V......... ..."
  10: 00 00 00 e0 a0 00 00 02 01 02 05 b0 00 00 00 20  "............... "
  20: 00 f0 ff 23 00 00 00 28 00 f0 ff 2b 00 20 00 00  "...#...(...+. .."
  30: fc 20 00 00 00 24 00 00 fc 24 00 00 ff 01 c0 05  ". ...$...$......"

bus 00, slot 1f, func 6, vend:dev:s_vend:s_dev:rev 8086:24c6:161f:202f:03
class 07, sub_class 03 prog_if 00, hdr 0, flags <pm>, irq 17
  addr0 0000e800, size 00000100
  addr1 0000ec00, size 00000080
  00: 86 80 c6 24 01 00 90 02 03 00 03 07 00 00 00 00  "...$............"
  10: 01 e8 00 00 01 ec 00 00 00 00 00 00 00 00 00 00  "................"
  20: 00 00 00 00 00 00 00 00 00 00 00 00 1f 16 2f 20  "............../ "
  30: 00 00 00 00 50 00 00 00 00 00 00 00 03 02 00 00  "....P..........."
  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  50: 01 00  ".."

bus 00, slot 1f, func 5, vend:dev:s_vend:s_dev:rev 8086:24c5:161f:202f:03
class 04, sub_class 01 prog_if 00, hdr 0, flags <pm>, irq 3
  addr0 0000e400, size 00000100
  addr1 0000ee80, size 00000040
  addr2 e02ff800, size 00000200
  addr3 e02ff400, size 00000100
  00: 86 80 c5 24 07 00 90 02 03 00 01 04 00 00 00 00  "...$............"
  10: 01 e4 00 00 81 ee 00 00 00 f8 2f e0 00 f4 2f e0  "........../.../."
  20: 00 00 00 00 00 00 00 00 00 00 00 00 1f 16 2f 20  "............../ "
  30: 00 00 00 00 50 00 00 00 00 00 00 00 03 02 00 00  "....P..........."
  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  50: 01 00  ".."

bus 00, slot 1f, func 1, vend:dev:s_vend:s_dev:rev 8086:24ca:161f:202f:03
class 01, sub_class 01 prog_if 8a, hdr 0, flags <>, irq 18
  addr0 000001f0, size 00000008
  addr1 000003f6, size 00000001
  addr2 00000170, size 00000008
  addr3 00000376, size 00000001
  addr4 0000ffa0, size 00000010
  addr5 26000000, size 00000400
  00: 86 80 ca 24 07 00 80 02 03 8a 01 01 00 00 00 00  "...$............"
  10: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00  "................"
  20: a1 ff 00 00 00 00 00 26 00 00 00 00 1f 16 2f 20  ".......&....../ "
  30: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00  "................"

bus 00, slot 1f, func 0, vend:dev:s_vend:s_dev:rev 8086:24cc:0000:0000:03
class 06, sub_class 01 prog_if 00, hdr 0, flags <>, irq 0
  00: 86 80 cc 24 0f 01 80 02 03 00 01 06 00 00 80 00  "...$............"
  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"

bus 00->01, slot 1e, func 0, vend:dev:s_vend:s_dev:rev 8086:2448:0000:0000:83
class 06, sub_class 04 prog_if 00, hdr 1, flags <>, irq 0
  00: 86 80 48 24 07 01 80 88 83 00 04 06 00 00 01 00  "..H$............"
  10: 00 00 00 00 00 00 00 00 00 01 05 40 20 20 80 02  "...........@  .."
  20: 00 e0 00 e0 00 20 f0 25 00 00 00 00 00 00 00 00  "..... .%........"
  30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 00  "................"

bus 00, slot 1d, func 7, vend:dev:s_vend:s_dev:rev 8086:24cd:161f:202f:03
class 0c, sub_class 03 prog_if 20, hdr 0, flags <pm>, irq 23
  addr0 e02ffc00, size 00000400
  00: 86 80 cd 24 06 01 90 02 03 20 03 0c 00 00 00 00  "...$..... ......"
  10: 00 fc 2f e0 00 00 00 00 00 00 00 00 00 00 00 00  "../............."
  20: 00 00 00 00 00 00 00 00 00 00 00 00 1f 16 2f 20  "............../ "
  30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 04 00 00  "....P..........."
  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  50: 01 58 00 00 00 00 00 00 0a 00  ".X........"

bus 00, slot 1d, func 2, vend:dev:s_vend:s_dev:rev 8086:24c7:161f:202f:03
class 0c, sub_class 03 prog_if 00, hdr 0, flags <>, irq 18
  addr4 0000ef80, size 00000020
  00: 86 80 c7 24 05 00 80 02 03 00 03 0c 00 00 00 00  "...$............"
  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  20: 81 ef 00 00 00 00 00 00 00 00 00 00 1f 16 2f 20  "............../ "
  30: 00 00 00 00 00 00 00 00 00 00 00 00 09 03 00 00  "................"

bus 00, slot 1d, func 1, vend:dev:s_vend:s_dev:rev 8086:24c4:161f:202f:03
class 0c, sub_class 03 prog_if 00, hdr 0, flags <>, irq 19
  addr4 0000ef40, size 00000020
  00: 86 80 c4 24 05 00 80 02 03 00 03 0c 00 00 00 00  "...$............"
  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  20: 41 ef 00 00 00 00 00 00 00 00 00 00 1f 16 2f 20  "A............./ "
  30: 00 00 00 00 00 00 00 00 00 00 00 00 05 02 00 00  "................"

bus 00, slot 1d, func 0, vend:dev:s_vend:s_dev:rev 8086:24c2:161f:202f:03
class 0c, sub_class 03 prog_if 00, hdr 0, flags <>, irq 16
  addr4 0000ef20, size 00000020
  00: 86 80 c2 24 05 00 80 02 03 00 03 0c 00 00 80 00  "...$............"
  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  20: 21 ef 00 00 00 00 00 00 00 00 00 00 1f 16 2f 20  "!............./ "
  30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 01 00 00  "................"

bus 00, slot 02, func 1, vend:dev:s_vend:s_dev:rev 8086:3582:161f:202f:02
class 03, sub_class 80 prog_if 00, hdr 0, flags <pm>, irq 0
  addr0 d0000000, size 08000000
  addr1 e0300000, size 00080000
  00: 86 80 82 35 07 00 90 00 02 00 80 03 00 00 80 00  "...5............"
  10: 08 00 00 d0 00 00 30 e0 00 00 00 00 00 00 00 00  "......0........."
  20: 00 00 00 00 00 00 00 00 00 00 00 00 1f 16 2f 20  "............../ "
  30: 00 00 00 00 d0 00 00 00 00 00 00 00 00 00 00 00  "................"
  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  d0: 01 00  ".."

bus 00, slot 02, func 0, vend:dev:s_vend:s_dev:rev 8086:3582:161f:202f:02
class 03, sub_class 00 prog_if 00, hdr 0, flags <pm>, irq 16
  addr0 d8000000, size 08000000
  addr1 e0380000, size 00080000
  addr2 0000eff0, size 00000008
  00: 86 80 82 35 07 00 98 00 02 00 00 03 00 00 80 00  "...5............"
  10: 08 00 00 d8 00 00 38 e0 f1 ef 00 00 00 00 00 00  "......8........."
  20: 00 00 00 00 00 00 00 00 00 00 00 00 1f 16 2f 20  "............../ "
  30: 00 00 00 00 d0 00 00 00 00 00 00 00 0b 01 00 00  "................"
  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  d0: 01 00  ".."

bus 00, slot 00, func 3, vend:dev:s_vend:s_dev:rev 8086:3585:161f:202f:02
class 08, sub_class 80 prog_if 00, hdr 0, flags <>, irq 0
  00: 86 80 85 35 06 00 80 00 02 00 80 08 00 00 80 00  "...5............"
  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  20: 00 00 00 00 00 00 00 00 00 00 00 00 1f 16 2f 20  "............../ "
  30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"

bus 00, slot 00, func 1, vend:dev:s_vend:s_dev:rev 8086:3584:161f:202f:02
class 08, sub_class 80 prog_if 00, hdr 0, flags <>, irq 0
  00: 86 80 84 35 06 00 80 00 02 00 80 08 00 00 00 00  "...5............"
  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  20: 00 00 00 00 00 00 00 00 00 00 00 00 1f 16 2f 20  "............../ "
  30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"

bus 00, slot 00, func 0, vend:dev:s_vend:s_dev:rev 8086:3580:161f:202f:02
class 06, sub_class 00 prog_if 00, hdr 0, flags <>, irq 0
  00: 86 80 80 35 06 01 90 30 02 00 00 06 00 00 80 00  "...5...0........"
  10: 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  20: 00 00 00 00 00 00 00 00 00 00 00 00 1f 16 2f 20  "............../ "
  30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00  "....@..........."
  40: 09 00  ".."
---------- PCI raw data end ----------
>> pci.4: build list
>> pci.3: macio
sysfs: no such bus: macio
>> pci.4: vio
sysfs: no such bus: vio
>> pci.5: xen
sysfs: no such bus: xen
>> pci.6: ps3
sysfs: no such bus: ps3_system_bus
>> pci.7: platform
  platform device: name = regulatory.0
    path = /devices/platform/regulatory.0
    type = "platform:regulatory"
  platform device: sf_eth_net = (null) sf_eth_dev = (nil)
  platform device: name = iTCO_wdt
    path = /devices/platform/iTCO_wdt
    type = "platform:iTCO_wdt"
  platform device: sf_eth_net = (null) sf_eth_dev = (nil)
  platform device: name = eisa.0
    path = /devices/platform/eisa.0
    type = "platform:eisa"
  platform device: sf_eth_net = (null) sf_eth_dev = (nil)
  platform device: name = i8042
    path = /devices/platform/i8042
    type = "platform:i8042"
  platform device: sf_eth_net = (null) sf_eth_dev = (nil)
  platform device: name = Fixed MDIO bus.0
    path = /devices/platform/Fixed MDIO bus.0
    type = "platform:Fixed MDIO bus"
  platform device: sf_eth_net = (null) sf_eth_dev = (nil)
  platform device: name = serial8250
    path = /devices/platform/serial8250
    type = "platform:serial8250"
  platform device: sf_eth_net = (null) sf_eth_dev = (nil)
  platform device: name = pcspkr
    path = /devices/platform/pcspkr
    type = "platform:pcspkr"
  platform device: sf_eth_net = (null) sf_eth_dev = (nil)
>> pci.8: of_platform
sysfs: no such bus: of_platform
>> pci.9: vm
sysfs: no such bus: vm
>> pci.10: virtio
sysfs: no such bus: virtio
>> monitor.1: ddc
>> monitor.2: bios
>> monitor.3: pci
>> monitor.4: internal db
>> monitor.5: prom
>> isapnp.1: pnp devices
  pnp device: name = 00:0b
    path = /devices/pnp0/00:0b
    id = PNP 0c01
  pnp device: name = 00:0a
    path = /devices/pnp0/00:0a
    id = SYN 0b03
  pnp device: name = 00:09
    path = /devices/pnp0/00:09
    id = PNP 0303
  pnp device: name = 00:08
    path = /devices/pnp0/00:08
    id = PNP 0c02
  pnp device: name = 00:07
    path = /devices/pnp0/00:07
    id = PNP 0c02
  pnp device: name = 00:06
    path = /devices/pnp0/00:06
    id = INT 0800
  pnp device: name = 00:05
    path = /devices/pnp0/00:05
    id = PNP 0c02
  pnp device: name = 00:04
    path = /devices/pnp0/00:04
    id = PNP 0c04
  pnp device: name = 00:03
    path = /devices/pnp0/00:03
    id = PNP 0800
  pnp device: name = 00:02
    path = /devices/pnp0/00:02
    id = PNP 0b00
  pnp device: name = 00:01
    path = /devices/pnp0/00:01
    id = PNP 0200
  pnp device: name = 00:00
    path = /devices/pnp0/00:00
    id = PNP 0a03
>> pcmcia.1: sysfs drivers
>> pcmcia.2: pcmcia
sysfs: no such bus: pcmcia
>> pcmcia.3: pcmcia ctrl
sysfs: no such class: pcmcia_socket
>> serial.1: read info
----- /proc/tty/driver/serial -----
  0: uart:unknown port:000003F8 irq:4
  1: uart:unknown port:000002F8 irq:3
  2: uart:unknown port:000003E8 irq:4
  3: uart:unknown port:000002E8 irq:3
----- /proc/tty/driver/serial end -----
----- serial info -----
----- serial info end -----
>> serial.2: build list
>> misc.5: misc data
----- misc resources -----
i/o:1 0x0000 - 0x001f (0x20) "dma1"
i/o:1 0x0020 - 0x0021 (0x02) "pic1"
i/o:0 0x0040 - 0x0043 (0x04) "timer0"
i/o:0 0x0050 - 0x0053 (0x04) "timer1"
i/o:1 0x0060 - 0x0060 (0x01) "keyboard"
i/o:1 0x0064 - 0x0064 (0x01) "keyboard"
i/o:0 0x0070 - 0x0071 (0x02) "rtc0"
i/o:1 0x0080 - 0x008f (0x10) "dma page reg"
i/o:1 0x00a0 - 0x00a1 (0x02) "pic2"
i/o:1 0x00c0 - 0x00df (0x20) "dma2"
i/o:1 0x00f0 - 0x00ff (0x10) "fpu"
i/o:0 0x0170 - 0x0177 (0x08) "0000:00:1f.1"
i/o:0 0x0170 - 0x0177 (0x08) "ata_piix"
i/o:0 0x01f0 - 0x01f7 (0x08) "0000:00:1f.1"
i/o:0 0x01f0 - 0x01f7 (0x08) "ata_piix"
i/o:0 0x0376 - 0x0376 (0x01) "0000:00:1f.1"
i/o:0 0x0376 - 0x0376 (0x01) "ata_piix"
i/o:1 0x03c0 - 0x03df (0x20) "vga+"
i/o:0 0x03f6 - 0x03f6 (0x01) "0000:00:1f.1"
i/o:0 0x03f6 - 0x03f6 (0x01) "ata_piix"
i/o:0 0x0400 - 0x047f (0x80) "0000:00:1f.0"
i/o:0 0x0400 - 0x047f (0x80) "pnp 00:05"
i/o:0 0x0400 - 0x0403 (0x04) "ACPI PM1a_EVT_BLK"
i/o:0 0x0404 - 0x0405 (0x02) "ACPI PM1a_CNT_BLK"
i/o:0 0x0408 - 0x040b (0x04) "ACPI PM_TMR"
i/o:0 0x0410 - 0x0415 (0x06) "ACPI CPU throttle"
i/o:0 0x0420 - 0x0420 (0x01) "ACPI PM2_CNT_BLK"
i/o:0 0x0428 - 0x042f (0x08) "ACPI GPE0_BLK"
i/o:0 0x0430 - 0x0433 (0x04) "iTCO_wdt"
i/o:0 0x0460 - 0x047f (0x20) "iTCO_wdt"
i/o:0 0x04d0 - 0x04d1 (0x02) "pnp 00:05"
i/o:0 0x0500 - 0x053f (0x40) "0000:00:1f.0"
i/o:0 0x0500 - 0x053f (0x40) "pnp 00:05"
i/o:0 0x0800 - 0x080f (0x10) "pnp 00:05"
i/o:0 0x0cf8 - 0x0cff (0x08) "PCI conf1"
i/o:0 0x1100 - 0x113f (0x40) "pnp 00:08"
i/o:0 0x1254 - 0x1254 (0x01) "pnp 00:08"
i/o:0 0x12d4 - 0x12d4 (0x01) "pnp 00:08"
i/o:0 0x1300 - 0x1375 (0x76) "pnp 00:08"
i/o:0 0x1376 - 0x1376 (0x01) "pnp 00:08"
i/o:0 0x1377 - 0x137f (0x09) "pnp 00:08"
i/o:0 0x2000 - 0x2fff (0x1000) "PCI Bus 0000:01"
i/o:0 0x2000 - 0x20ff (0x100) "PCI CardBus 0000:02"
i/o:0 0x2400 - 0x24ff (0x100) "PCI CardBus 0000:02"
i/o:0 0xe400 - 0xe4ff (0x100) "0000:00:1f.5"
i/o:0 0xe800 - 0xe8ff (0x100) "0000:00:1f.6"
i/o:0 0xec00 - 0xec7f (0x80) "0000:00:1f.6"
i/o:0 0xee80 - 0xeebf (0x40) "0000:00:1f.5"
i/o:0 0xef20 - 0xef3f (0x20) "0000:00:1d.0"
i/o:0 0xef20 - 0xef3f (0x20) "uhci_hcd"
i/o:0 0xef40 - 0xef5f (0x20) "0000:00:1d.1"
i/o:0 0xef40 - 0xef5f (0x20) "uhci_hcd"
i/o:0 0xef80 - 0xef9f (0x20) "0000:00:1d.2"
i/o:0 0xef80 - 0xef9f (0x20) "uhci_hcd"
i/o:0 0xeff0 - 0xeff7 (0x08) "0000:00:02.0"
i/o:0 0xffa0 - 0xffaf (0x10) "0000:00:1f.1"
i/o:0 0xffa0 - 0xffaf (0x10) "ata_piix"
irq:1  0 (      169) "timer"
irq:0  1 (     2913) "i8042"
irq:0  8 (        0) "rtc0"
irq:0  9 (      113) "acpi"
irq:0 12 (  1266312) "i8042"
irq:0 14 (   144919) "ata_piix"
irq:0 15 (    19620) "ata_piix"
irq:0 16 (     1280) "uhci_hcd:usb2"
irq:0 17 (        1) "yenta"
irq:0 18 (    48035) "uhci_hcd:usb4" "b43"
irq:0 19 (    59378) "uhci_hcd:usb3" "eth0"
irq:0 23 (        2) "ehci_hcd:usb1"
dma:1 4 "cascade"
----- misc resources end -----
>> parallel.1: pp mod
----- exec: "/sbin/rmmod parport_pc" -----
----- return code: ? -----
----- exec: "/sbin/modprobe parport_pc" -----
  WARNING: All config files need .conf: /etc/modprobe.d/sound.save, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/oss-compat, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.save.3, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alda-base, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.save, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.conf.save, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.save.2, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.save.1, it will be ignored in a future release.
  WARNING: /etc/modprobe.d/alsa-base.save.1 line 1: ignoring bad line starting with '"options'
  WARNING: /etc/modprobe.d/alsa-base.save.2 line 1: ignoring bad line starting with '^0"options'
----- return code: ? -----
----- exec: "/sbin/modprobe lp" -----
  WARNING: All config files need .conf: /etc/modprobe.d/sound.save, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/oss-compat, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.save.3, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alda-base, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.save, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.conf.save, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.save.2, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.save.1, it will be ignored in a future release.
  WARNING: /etc/modprobe.d/alsa-base.save.1 line 1: ignoring bad line starting with '"options'
  WARNING: /etc/modprobe.d/alsa-base.save.2 line 1: ignoring bad line starting with '^0"options'
----- return code: ? -----
>> parallel.2.1: lp read info
>> parallel.2.2: lp read info
>> parallel.2.3: lp read info
----- parallel info -----
----- parallel info end -----
>> block.1: block modules
----- exec: "/sbin/modprobe ide-cd_mod " -----
  WARNING: All config files need .conf: /etc/modprobe.d/sound.save, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/oss-compat, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.save.3, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alda-base, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.save, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.conf.save, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.save.2, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.save.1, it will be ignored in a future release.
  WARNING: /etc/modprobe.d/alsa-base.save.1 line 1: ignoring bad line starting with '"options'
  WARNING: /etc/modprobe.d/alsa-base.save.2 line 1: ignoring bad line starting with '^0"options'
  FATAL: Module ide_cd_mod not found.
----- return code: ? -----
----- exec: "/sbin/modprobe ide-disk " -----
  WARNING: All config files need .conf: /etc/modprobe.d/sound.save, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/oss-compat, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.save.3, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alda-base, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.save, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.conf.save, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.save.2, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.save.1, it will be ignored in a future release.
  WARNING: /etc/modprobe.d/alsa-base.save.1 line 1: ignoring bad line starting with '"options'
  WARNING: /etc/modprobe.d/alsa-base.save.2 line 1: ignoring bad line starting with '^0"options'
  FATAL: Module ide_disk not found.
----- return code: ? -----
----- exec: "/sbin/modprobe sr_mod " -----
  WARNING: All config files need .conf: /etc/modprobe.d/sound.save, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/oss-compat, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.save.3, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alda-base, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.save, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.conf.save, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.save.2, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.save.1, it will be ignored in a future release.
  WARNING: /etc/modprobe.d/alsa-base.save.1 line 1: ignoring bad line starting with '"options'
  WARNING: /etc/modprobe.d/alsa-base.save.2 line 1: ignoring bad line starting with '^0"options'
  FATAL: Module sr_mod not found.
----- return code: ? -----
----- exec: "/sbin/modprobe sd_mod " -----
  WARNING: All config files need .conf: /etc/modprobe.d/sound.save, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/oss-compat, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.save.3, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alda-base, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.save, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.conf.save, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.save.2, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.save.1, it will be ignored in a future release.
  WARNING: /etc/modprobe.d/alsa-base.save.1 line 1: ignoring bad line starting with '"options'
  WARNING: /etc/modprobe.d/alsa-base.save.2 line 1: ignoring bad line starting with '^0"options'
  FATAL: Module sd_mod not found.
----- return code: ? -----
----- exec: "/sbin/modprobe st " -----
  WARNING: All config files need .conf: /etc/modprobe.d/sound.save, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/oss-compat, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.save.3, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alda-base, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.save, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.conf.save, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.save.2, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.save.1, it will be ignored in a future release.
  WARNING: /etc/modprobe.d/alsa-base.save.1 line 1: ignoring bad line starting with '"options'
  WARNING: /etc/modprobe.d/alsa-base.save.2 line 1: ignoring bad line starting with '^0"options'
----- return code: ? -----
>> block.2: sysfs drivers
----- sysfs driver list (id 0x3d6784e78ec4bcf5) -----
      serial8250: /devices/platform/serial8250
           i8042: /devices/platform/i8042
          pcspkr: /devices/platform/pcspkr
          pcspkr: module = pcspkr
        iTCO_wdt: module = iTCO_wdt
        iTCO_wdt: /devices/platform/iTCO_wdt
      parport_pc: module = parport_pc
            ahci: module = ahci
        ata_piix: /devices/pci0000:00/0000:00:1f.1
        sata_sil: module = sata_sil
         sata_nv: module = sata_nv
        pata_ali: module = pata_ali
     pata_cs5536: module = pata_cs5536
     pata_it821x: module = pata_it821x
        ehci_hcd: /devices/pci0000:00/0000:00:1d.7
        ehci_hcd: module = ehci_hcd
        uhci_hcd: /devices/pci0000:00/0000:00:1d.0
        uhci_hcd: /devices/pci0000:00/0000:00:1d.1
        uhci_hcd: /devices/pci0000:00/0000:00:1d.2
        uhci_hcd: module = uhci_hcd
  b43-pci-bridge: /devices/pci0000:00/0000:00:1e.0/0000:01:09.0
  b43-pci-bridge: module = ssb
             b44: /devices/pci0000:00/0000:00:1e.0/0000:01:06.0
             b44: module = ssb
          shpchp: module = shpchp
   agpgart-intel: /devices/pci0000:00/0000:00:00.0
   agpgart-intel: module = intel_agp
   yenta_cardbus: /devices/pci0000:00/0000:00:1e.0/0000:01:05.0
   yenta_cardbus: module = yenta_socket
       HDA Intel: module = snd_hda_intel
      parport_pc: module = parport_pc
              ec: /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:11/PNP0C09:00
        pci_root: /devices/LNXSYSTM:00/device:00/PNP0A03:00
        pci_link: /devices/LNXSYSTM:00/device:00/PNP0C0F:00
        pci_link: /devices/LNXSYSTM:00/device:00/PNP0C0F:01
        pci_link: /devices/LNXSYSTM:00/device:00/PNP0C0F:02
        pci_link: /devices/LNXSYSTM:00/device:00/PNP0C0F:03
        pci_link: /devices/LNXSYSTM:00/device:00/PNP0C0F:04
        pci_link: /devices/LNXSYSTM:00/device:00/PNP0C0F:05
        pci_link: /devices/LNXSYSTM:00/device:00/PNP0C0F:06
        pci_link: /devices/LNXSYSTM:00/device:00/PNP0C0F:07
              ac: /devices/LNXSYSTM:00/device:00/ACPI0003:00
         battery: /devices/LNXSYSTM:00/device:00/PNP0C0A:00
          button: /devices/LNXSYSTM:00/LNXPWRBN:00
          button: /devices/LNXSYSTM:00/device:00/PNP0C0D:00
          button: /devices/LNXSYSTM:00/device:00/PNP0C0E:00
          button: /devices/LNXSYSTM:00/device:00/PNP0C0C:00
       processor: /devices/LNXSYSTM:00/ACPI_CPU:00
       processor: /devices/LNXSYSTM:00/ACPI_CPU:01
         thermal: /devices/LNXSYSTM:00/LNXTHERM:00/LNXTHERM:01
           video: /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:12
          system: /devices/pnp0/00:05
          system: /devices/pnp0/00:07
          system: /devices/pnp0/00:08
          system: /devices/pnp0/00:0b
       i8042 kbd: /devices/pnp0/00:09
       i8042 aux: /devices/pnp0/00:0a
        rtc_cmos: /devices/pnp0/00:02
              sd: /devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0
              sr: /devices/pci0000:00/0000:00:1f.1/host1/target1:0:0/1:0:0:0
           usbfs: module = usbcore
             hub: module = usbcore
             hub: /devices/pci0000:00/0000:00:1d.7/usb1/1-0:1.0
             hub: /devices/pci0000:00/0000:00:1d.0/usb2/2-0:1.0
             hub: /devices/pci0000:00/0000:00:1d.1/usb3/3-0:1.0
             hub: /devices/pci0000:00/0000:00:1d.2/usb4/4-0:1.0
             usb: /devices/pci0000:00/0000:00:1d.7/usb1
             usb: /devices/pci0000:00/0000:00:1d.0/usb2
             usb: /devices/pci0000:00/0000:00:1d.1/usb3
             usb: /devices/pci0000:00/0000:00:1d.2/usb4
             usb: /devices/pci0000:00/0000:00:1d.1/usb3/3-1
          hiddev: module = usbhid
          usbhid: /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0
          usbhid: module = usbhid
           atkbd: /devices/platform/i8042/serio0
       serio_raw: module = serio_raw
         psmouse: module = psmouse
         psmouse: /devices/platform/i8042/serio1
     generic-usb: module = usbhid
     generic-usb: /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/0003:04D9:0499.0001
             b44: /devices/pci0000:00/0000:00:1e.0/0000:01:06.0/ssb1:0
             b44: module = b44
             b43: /devices/pci0000:00/0000:00:1e.0/0000:01:09.0/ssb0:0
             b43: module = b43
----- sysfs driver list end -----
>> block.3: cdrom
----- /proc/sys/dev/cdrom/info -----
drive name:		sr0
drive speed:		24
drive # of slots:	1
Can close tray:		1
Can open tray:		1
Can lock tray:		1
Can change speed:	1
Can select disk:	0
Can read multisession:	1
Can read MCN:		1
Reports media changed:	1
Can play audio:		1
Can write CD-R:		1
Can write CD-RW:	1
Can read DVD:		1
Can write DVD-R:	0
Can write DVD-RAM:	0
Can read MRW:		1
Can write MRW:		1
Can write RAM:		1
----- /proc/sys/dev/cdrom/info end -----
>> block.4: partition
----- /proc/partitions -----
     8        0   39070080 sda
     8        1   37672393 sda1
     8        2          1 sda2
     8        5    1397623 sda5
----- /proc/partitions end -----
disks:
  sda
partitions:
  sda1
  sda2
  sda5
>> block.5: get sysfs block dev data
-----  lsscsi -----
-----  lsscsi end -----
  block: name = sr0, path = /class/block/sr0
    dev = 11:0
    range = 1
    block device: bus = scsi, bus_id = 1:0:0:0 driver = sr
      path = /devices/pci0000:00/0000:00:1f.1/host1/target1:0:0/1:0:0:0
    vendor = Slimtype
    model = COMBO LSC-24082K
    rev = JBK2
    type = 5
>> block.5: /dev/sr0
>> block.5.1: /dev/sr0 cache
  scsi cache: 0x00
  block: name = sda5, path = /class/block/sda5
    dev = 8:5
  block: name = sda2, path = /class/block/sda2
    dev = 8:2
  block: name = sda1, path = /class/block/sda1
    dev = 8:1
  block: name = sda, path = /class/block/sda
    dev = 8:0
    range = 16
    block device: bus = scsi, bus_id = 0:0:0:0 driver = sd
      path = /devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0
    vendor = ATA
    model = ST94811A
    rev = 3.05
    type = 0
>> block.5: /dev/sda
>> block.5.1: /dev/sda geo
  dev = /dev/sda, fd = 4
  open ok, fd = 4
/dev/sda: ioctl(geo) ok
/dev/sda: ioctl(block size) ok
/dev/sda: ioctl(disk size) ok
>> block.5.2: /dev/sda serial
  serial id len: 20
  block: name = loop7, path = /class/block/loop7
    dev = 7:7
    range = 1
  block: name = loop6, path = /class/block/loop6
    dev = 7:6
    range = 1
  block: name = loop5, path = /class/block/loop5
    dev = 7:5
    range = 1
  block: name = loop4, path = /class/block/loop4
    dev = 7:4
    range = 1
  block: name = loop3, path = /class/block/loop3
    dev = 7:3
    range = 1
  block: name = loop2, path = /class/block/loop2
    dev = 7:2
    range = 1
  block: name = loop1, path = /class/block/loop1
    dev = 7:1
    range = 1
  block: name = loop0, path = /class/block/loop0
    dev = 7:0
    range = 1
  block: name = ram15, path = /class/block/ram15
    dev = 1:15
    range = 1
  block: name = ram14, path = /class/block/ram14
    dev = 1:14
    range = 1
  block: name = ram13, path = /class/block/ram13
    dev = 1:13
    range = 1
  block: name = ram12, path = /class/block/ram12
    dev = 1:12
    range = 1
  block: name = ram11, path = /class/block/ram11
    dev = 1:11
    range = 1
  block: name = ram10, path = /class/block/ram10
    dev = 1:10
    range = 1
  block: name = ram9, path = /class/block/ram9
    dev = 1:9
    range = 1
  block: name = ram8, path = /class/block/ram8
    dev = 1:8
    range = 1
  block: name = ram7, path = /class/block/ram7
    dev = 1:7
    range = 1
  block: name = ram6, path = /class/block/ram6
    dev = 1:6
    range = 1
  block: name = ram5, path = /class/block/ram5
    dev = 1:5
    range = 1
  block: name = ram4, path = /class/block/ram4
    dev = 1:4
    range = 1
  block: name = ram3, path = /class/block/ram3
    dev = 1:3
    range = 1
  block: name = ram2, path = /class/block/ram2
    dev = 1:2
    range = 1
  block: name = ram1, path = /class/block/ram1
    dev = 1:1
    range = 1
  block: name = ram0, path = /class/block/ram0
    dev = 1:0
    range = 1
>> scsi.1: scsi modules
----- exec: "/sbin/modprobe sg " -----
  WARNING: All config files need .conf: /etc/modprobe.d/sound.save, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/oss-compat, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.save.3, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alda-base, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.save, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.conf.save, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.save.2, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.save.1, it will be ignored in a future release.
  WARNING: /etc/modprobe.d/alsa-base.save.1 line 1: ignoring bad line starting with '"options'
  WARNING: /etc/modprobe.d/alsa-base.save.2 line 1: ignoring bad line starting with '^0"options'
  FATAL: Module sg not found.
----- return code: ? -----
>> scsi.2: scsi tape
sysfs: no such class: scsi_tape
>> scsi.3: scsi generic
  scsi: name = sg1, path = /class/scsi_generic/sg1
    dev = 21:1
    scsi device: bus_id = 1:0:0:0 driver = sr
      path = /devices/pci0000:00/0000:00:1f.1/host1/target1:0:0/1:0:0:0
  scsi: name = sg0, path = /class/scsi_generic/sg0
    dev = 21:0
    scsi device: bus_id = 0:0:0:0 driver = sd
      path = /devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0
>> usb.1: sysfs drivers
>> usb.2: usb
  usb dev: /devices/pci0000:00/0000:00:1d.1/usb3/3-1
  usb dev: /devices/pci0000:00/0000:00:1d.2/usb4
  usb dev: /devices/pci0000:00/0000:00:1d.1/usb3
  usb dev: /devices/pci0000:00/0000:00:1d.0/usb2
  usb dev: /devices/pci0000:00/0000:00:1d.7/usb1
  usb device: name = 3-1:1.0
    path = /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0
    modalias = "usb:v04D9p0499d0290dc00dsc00dp00ic03isc01ip02"
    bInterfaceNumber = 0
    bInterfaceClass = 3
    bInterfaceSubClass = 1
    bInterfaceProtocol = 2
    if: 3-1:1.0 @ /devices/pci0000:00/0000:00:1d.1/usb3/3-1
    bDeviceClass = 0
    bDeviceSubClass = 0
    bDeviceProtocol = 0
    idVendor = 0x04d9
    idProduct = 0x0499
    bcdDevice = 0290
    speed = "1.5"
  usb device: name = 3-1
    path = /devices/pci0000:00/0000:00:1d.1/usb3/3-1
  usb device: name = 4-0:1.0
    path = /devices/pci0000:00/0000:00:1d.2/usb4/4-0:1.0
    modalias = "usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00"
    bInterfaceNumber = 0
    bInterfaceClass = 9
    bInterfaceSubClass = 0
    bInterfaceProtocol = 0
    if: 4-0:1.0 @ /devices/pci0000:00/0000:00:1d.2/usb4
    bDeviceClass = 9
    bDeviceSubClass = 0
    bDeviceProtocol = 0
    idVendor = 0x1d6b
    idProduct = 0x0001
    manufacturer = "Linux 2.6.28-16-generic uhci_hcd"
    product = "UHCI Host Controller"
    serial = "0000:00:1d.2"
    bcdDevice = 0206
    speed = "12"
  usb device: name = usb4
    path = /devices/pci0000:00/0000:00:1d.2/usb4
  usb device: name = 3-0:1.0
    path = /devices/pci0000:00/0000:00:1d.1/usb3/3-0:1.0
    modalias = "usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00"
    bInterfaceNumber = 0
    bInterfaceClass = 9
    bInterfaceSubClass = 0
    bInterfaceProtocol = 0
    if: 3-0:1.0 @ /devices/pci0000:00/0000:00:1d.1/usb3
    bDeviceClass = 9
    bDeviceSubClass = 0
    bDeviceProtocol = 0
    idVendor = 0x1d6b
    idProduct = 0x0001
    manufacturer = "Linux 2.6.28-16-generic uhci_hcd"
    product = "UHCI Host Controller"
    serial = "0000:00:1d.1"
    bcdDevice = 0206
    speed = "12"
  usb device: name = usb3
    path = /devices/pci0000:00/0000:00:1d.1/usb3
  usb device: name = 2-0:1.0
    path = /devices/pci0000:00/0000:00:1d.0/usb2/2-0:1.0
    modalias = "usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00"
    bInterfaceNumber = 0
    bInterfaceClass = 9
    bInterfaceSubClass = 0
    bInterfaceProtocol = 0
    if: 2-0:1.0 @ /devices/pci0000:00/0000:00:1d.0/usb2
    bDeviceClass = 9
    bDeviceSubClass = 0
    bDeviceProtocol = 0
    idVendor = 0x1d6b
    idProduct = 0x0001
    manufacturer = "Linux 2.6.28-16-generic uhci_hcd"
    product = "UHCI Host Controller"
    serial = "0000:00:1d.0"
    bcdDevice = 0206
    speed = "12"
  usb device: name = usb2
    path = /devices/pci0000:00/0000:00:1d.0/usb2
  usb device: name = 1-0:1.0
    path = /devices/pci0000:00/0000:00:1d.7/usb1/1-0:1.0
    modalias = "usb:v1D6Bp0002d0206dc09dsc00dp00ic09isc00ip00"
    bInterfaceNumber = 0
    bInterfaceClass = 9
    bInterfaceSubClass = 0
    bInterfaceProtocol = 0
    if: 1-0:1.0 @ /devices/pci0000:00/0000:00:1d.7/usb1
    bDeviceClass = 9
    bDeviceSubClass = 0
    bDeviceProtocol = 0
    idVendor = 0x1d6b
    idProduct = 0x0002
    manufacturer = "Linux 2.6.28-16-generic ehci_hcd"
    product = "EHCI Host Controller"
    serial = "0000:00:1d.7"
    bcdDevice = 0206
    speed = "480"
  usb device: name = usb1
    path = /devices/pci0000:00/0000:00:1d.7/usb1
>> usb.3.1: joydev mod
>> usb.3.2: evdev mod
----- exec: "/sbin/modprobe evdev " -----
  WARNING: All config files need .conf: /etc/modprobe.d/sound.save, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/oss-compat, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.save.3, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alda-base, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.save, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.conf.save, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.save.2, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.save.1, it will be ignored in a future release.
  WARNING: /etc/modprobe.d/alsa-base.save.1 line 1: ignoring bad line starting with '"options'
  WARNING: /etc/modprobe.d/alsa-base.save.2 line 1: ignoring bad line starting with '^0"options'
  FATAL: Module evdev not found.
----- return code: ? -----
>> usb.3.3: input
  input: name = event10, path = /devices/virtual/input/input10/event10
    dev = 13:74
    input device: bus = (null), bus_id = input10 driver = (null)
      path = /devices/virtual/input/input10
  input: name = input10, path = /devices/virtual/input/input10
  input: name = event9, path = /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input9/event9
    dev = 13:73
    input device: bus = (null), bus_id = 3-1:1.0 driver = usbhid
      path = /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0
  input: name = mouse2, path = /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input9/mouse2
    dev = 13:34
    input device: bus = (null), bus_id = 3-1:1.0 driver = usbhid
      path = /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0
  input: name = input9, path = /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input9
    input device: bus = (null), bus_id = 3-1:1.0 driver = usbhid
      path = /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0
  input: name = event8, path = /devices/platform/i8042/serio1/input/input8/event8
    dev = 13:72
    input device: bus = (null), bus_id = serio1 driver = psmouse
      path = /devices/platform/i8042/serio1
  input: name = mouse1, path = /devices/platform/i8042/serio1/input/input8/mouse1
    dev = 13:33
    input device: bus = (null), bus_id = serio1 driver = psmouse
      path = /devices/platform/i8042/serio1
  input: name = input8, path = /devices/platform/i8042/serio1/input/input8
    input device: bus = (null), bus_id = serio1 driver = psmouse
      path = /devices/platform/i8042/serio1
  input: name = input7, path = /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:12/input/input7
    input device: bus = (null), bus_id = device:12 driver = video
      path = /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:12
  input: name = event7, path = /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:12/input/input7/event7
    dev = 13:71
    input device: bus = (null), bus_id = device:12 driver = video
      path = /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:12
  input: name = event6, path = /devices/platform/pcspkr/input/input6/event6
    dev = 13:70
    input device: bus = (null), bus_id = pcspkr driver = pcspkr
      path = /devices/platform/pcspkr
  input: name = input6, path = /devices/platform/pcspkr/input/input6
    input device: bus = (null), bus_id = pcspkr driver = pcspkr
      path = /devices/platform/pcspkr
  input: name = event5, path = /devices/platform/i8042/serio0/input/input5/event5
    dev = 13:69
    input device: bus = (null), bus_id = serio0 driver = atkbd
      path = /devices/platform/i8042/serio0
  input: name = input5, path = /devices/platform/i8042/serio0/input/input5
    input device: bus = (null), bus_id = serio0 driver = atkbd
      path = /devices/platform/i8042/serio0
  input: name = event4, path = /devices/virtual/input/input4/event4
    dev = 13:68
    input device: bus = (null), bus_id = input4 driver = (null)
      path = /devices/virtual/input/input4
  input: name = event3, path = /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3
    dev = 13:67
    input device: bus = (null), bus_id = PNP0C0C:00 driver = button
      path = /devices/LNXSYSTM:00/device:00/PNP0C0C:00
  input: name = event2, path = /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2
    dev = 13:66
    input device: bus = (null), bus_id = PNP0C0E:00 driver = button
      path = /devices/LNXSYSTM:00/device:00/PNP0C0E:00
  input: name = event1, path = /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1/event1
    dev = 13:65
    input device: bus = (null), bus_id = PNP0C0D:00 driver = button
      path = /devices/LNXSYSTM:00/device:00/PNP0C0D:00
  input: name = event0, path = /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0/event0
    dev = 13:64
    input device: bus = (null), bus_id = LNXPWRBN:00 driver = button
      path = /devices/LNXSYSTM:00/LNXPWRBN:00
  input: name = mouse0, path = /devices/virtual/input/input4/mouse0
    dev = 13:32
    input device: bus = (null), bus_id = input4 driver = (null)
      path = /devices/virtual/input/input4
  input: name = mice, path = /devices/virtual/input/mice
    dev = 13:63
  input: name = input4, path = /devices/virtual/input/input4
  input: name = input3, path = /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
    input device: bus = (null), bus_id = PNP0C0C:00 driver = button
      path = /devices/LNXSYSTM:00/device:00/PNP0C0C:00
  input: name = input2, path = /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
    input device: bus = (null), bus_id = PNP0C0E:00 driver = button
      path = /devices/LNXSYSTM:00/device:00/PNP0C0E:00
  input: name = input1, path = /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
    input device: bus = (null), bus_id = PNP0C0D:00 driver = button
      path = /devices/LNXSYSTM:00/device:00/PNP0C0D:00
  input: name = input0, path = /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
    input device: bus = (null), bus_id = LNXPWRBN:00 driver = button
      path = /devices/LNXSYSTM:00/LNXPWRBN:00
>> usb.3.4: lp
>> usb.3.5: serial
>> edd.1: edd mod
----- exec: "/sbin/modprobe edd " -----
  WARNING: All config files need .conf: /etc/modprobe.d/sound.save, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/oss-compat, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.save.3, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alda-base, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.save, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.conf.save, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.save.2, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.save.1, it will be ignored in a future release.
  WARNING: /etc/modprobe.d/alsa-base.save.1 line 1: ignoring bad line starting with '"options'
  WARNING: /etc/modprobe.d/alsa-base.save.2 line 1: ignoring bad line starting with '^0"options'
  FATAL: Module edd not found.
----- return code: ? -----
>> edd.2: edd info
>> modem.1: serial
******  started child process 9397 (15s/120s)  ******
******  stopped child process 9397 (120s)  ******
>> mouse.2: serial
******  started child process 9398 (20s/20s)  ******
******  stopped child process 9398 (20s)  ******
>> input.1: joydev mod
>> input.1.1: evdev mod
----- exec: "/sbin/modprobe evdev " -----
  WARNING: All config files need .conf: /etc/modprobe.d/sound.save, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/oss-compat, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.save.3, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alda-base, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.save, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.conf.save, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.save.2, it will be ignored in a future release.
  WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.save.1, it will be ignored in a future release.
  WARNING: /etc/modprobe.d/alsa-base.save.1 line 1: ignoring bad line starting with '"options'
  WARNING: /etc/modprobe.d/alsa-base.save.2 line 1: ignoring bad line starting with '^0"options'
  FATAL: Module evdev not found.
----- return code: ? -----
>> input.2: input
----- /proc/bus/input/devices -----
  I: Bus=0019 Vendor=0000 Product=0002 Version=0000
  N: Name="Power Button (FF)"
  P: Phys=LNXPWRBN/button/input0
  S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
  U: Uniq=
  H: Handlers=kbd event0
  B: EV=3
  B: KEY=100000 0 0 0

  I: Bus=0019 Vendor=0000 Product=0005 Version=0000
  N: Name="Lid Switch"
  P: Phys=PNP0C0D/button/input0
  S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
  U: Uniq=
  H: Handlers=event1
  B: EV=21
  B: SW=1

  I: Bus=0019 Vendor=0000 Product=0003 Version=0000
  N: Name="Sleep Button (CM)"
  P: Phys=PNP0C0E/button/input0
  S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
  U: Uniq=
  H: Handlers=kbd event2
  B: EV=3
  B: KEY=4000 0 0 0 0

  I: Bus=0019 Vendor=0000 Product=0001 Version=0000
  N: Name="Power Button (CM)"
  P: Phys=PNP0C0C/button/input0
  S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
  U: Uniq=
  H: Handlers=kbd event3
  B: EV=3
  B: KEY=100000 0 0 0

  I: Bus=0017 Vendor=0001 Product=0001 Version=0100
  N: Name="Macintosh mouse button emulation"
  P: Phys=
  S: Sysfs=/devices/virtual/input/input4
  U: Uniq=
  H: Handlers=mouse0 event4
  B: EV=7
  B: KEY=70000 0 0 0 0 0 0 0 0
  B: REL=3

  I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
  N: Name="AT Translated Set 2 keyboard"
  P: Phys=isa0060/serio0/input0
  S: Sysfs=/devices/platform/i8042/serio0/input/input5
  U: Uniq=
  H: Handlers=kbd event5
  B: EV=120013
  B: KEY=4 2000000 3803078 f800d001 feffffdf ffefffff ffffffff fffffffe
  B: MSC=10
  B: LED=7

  I: Bus=0010 Vendor=001f Product=0001 Version=0100
  N: Name="PC Speaker"
  P: Phys=isa0061/input0
  S: Sysfs=/devices/platform/pcspkr/input/input6
  U: Uniq=
  H: Handlers=kbd event6
  B: EV=40001
  B: SND=6

  I: Bus=0019 Vendor=0000 Product=0006 Version=0000
  N: Name="Video Bus"
  P: Phys=/video/input0
  S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:12/input/input7
  U: Uniq=
  H: Handlers=kbd event7
  B: EV=3
  B: KEY=3f000b 0 0 0 0 0 0 0

  I: Bus=0011 Vendor=0002 Product=0007 Version=23b3
  N: Name="SynPS/2 Synaptics TouchPad"
  P: Phys=isa0060/serio1/input0
  S: Sysfs=/devices/platform/i8042/serio1/input/input8
  U: Uniq=
  H: Handlers=mouse1 event8
  B: EV=b
  B: KEY=6420 0 70000 0 0 0 0 0 0 0 0
  B: ABS=11000003

  I: Bus=0003 Vendor=04d9 Product=0499 Version=0110
  N: Name="HID 04d9:0499"
  P: Phys=usb-0000:00:1d.1-1/input0
  S: Sysfs=/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input9
  U: Uniq=
  H: Handlers=mouse2 event9
  B: EV=17
  B: KEY=70000 0 0 0 0 0 0 0 0
  B: REL=103
  B: MSC=10

  I: Bus=0019 Vendor=14e4 Product=0000 Version=0000
  N: Name="b43-phy0"
  P: Phys=
  S: Sysfs=/devices/virtual/input/input10
  U: Uniq=
  H: Handlers=kbd event10 rfkill
  B: EV=3
  B: KEY=4000 0 0 0 0 0 0 0

----- /proc/bus/input/devices end -----
bus = 25, name = Power Button (FF)
  handlers = kbd event0
  key = 00100000000000000000000000000000
  mouse buttons = 0
  mouse wheels = 0
bus = 25, name = Lid Switch
  handlers = event1
  mouse buttons = 0
  mouse wheels = 0
bus = 25, name = Sleep Button (CM)
  handlers = kbd event2
  key = 0000400000000000000000000000000000000000
  mouse buttons = 0
  mouse wheels = 0
bus = 25, name = Power Button (CM)
  handlers = kbd event3
  key = 00100000000000000000000000000000
  mouse buttons = 0
  mouse wheels = 0
bus = 23, name = Macintosh mouse button emulation
  handlers = mouse0 event4
  key = 000700000000000000000000000000000000000000000000000000000000000000000000
  rel = 00000003
  mouse buttons = 3
  mouse wheels = 0
bus = 17, name = AT Translated Set 2 keyboard
  handlers = kbd event5
  key = 000000040200000003803078f800d001feffffdfffeffffffffffffffffffffe
  mouse buttons = 0
  mouse wheels = 0
bus = 16, name = PC Speaker
  handlers = kbd event6
  mouse buttons = 0
  mouse wheels = 0
bus = 25, name = Video Bus
  handlers = kbd event7
  key = 003f000b00000000000000000000000000000000000000000000000000000000
  mouse buttons = 0
  mouse wheels = 0
bus = 17, name = SynPS/2 Synaptics TouchPad
  handlers = mouse1 event8
  key = 0000642000000000000700000000000000000000000000000000000000000000000000000000000000000000
  abs = 11000003
  mouse buttons = 3
  mouse wheels = 0
bus = 3, name = HID 04d9:0499
  handlers = mouse2 event9
  key = 000700000000000000000000000000000000000000000000000000000000000000000000
  rel = 00000103
  mouse buttons = 3
  mouse wheels = 1
bus = 25, name = b43-phy0
  handlers = kbd event10 rfkill
  key = 0000400000000000000000000000000000000000000000000000000000000000
  mouse buttons = 0
  mouse wheels = 0
>> kbd.2: uml
>> cpu.1: cpuinfo
----- /proc/cpuinfo -----
  processor	: 0
  vendor_id	: GenuineIntel
  cpu family	: 15
  model		: 3
  model name	: Mobile Intel(R) Pentium(R) 4 CPU 2.80GHz
  stepping	: 4
  cpu MHz		: 2790.863
  cache size	: 1024 KB
  physical id	: 0
  siblings	: 2
  core id		: 0
  cpu cores	: 1
  apicid		: 0
  initial apicid	: 0
  fdiv_bug	: no
  hlt_bug		: no
  f00f_bug	: no
  coma_bug	: no
  fpu		: yes
  fpu_exception	: yes
  cpuid level	: 5
  wp		: yes
  flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe constant_tsc pebs bts pni dtes64 monitor ds_cpl est tm2 cid xtpr
  bogomips	: 5581.72
  clflush size	: 64
  power management:

  processor	: 1
  vendor_id	: GenuineIntel
  cpu family	: 15
  model		: 3
  model name	: Mobile Intel(R) Pentium(R) 4 CPU 2.80GHz
  stepping	: 4
  cpu MHz		: 2790.863
  cache size	: 1024 KB
  physical id	: 0
  siblings	: 2
  core id		: 0
  cpu cores	: 1
  apicid		: 1
  initial apicid	: 1
  fdiv_bug	: no
  hlt_bug		: no
  f00f_bug	: no
  coma_bug	: no
  fpu		: yes
  fpu_exception	: yes
  cpuid level	: 5
  wp		: yes
  flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe constant_tsc pebs bts pni dtes64 monitor ds_cpl est tm2 cid xtpr
  bogomips	: 5581.80
  clflush size	: 64
  power management:

----- /proc/cpuinfo end -----
>> kbd.3: serial console
>> fb.1: read info
>> net.1: get network data
  net interface: name = pan0, path = /class/net/pan0
    type = 1
    hw_addr = 0e:f9:c4:90:f2:ee
    ethtool driver: bridge
    ethtool    bus: N/A
  net interface: name = virbr0, path = /class/net/virbr0
    type = 1
    carrier = 1
    hw_addr = c2:15:8b:5e:4a:a4
    ethtool driver: bridge
    ethtool    bus: N/A
  net interface: name = wlan0, path = /class/net/wlan0
    type = 1
    carrier = 1
    hw_addr = 00:90:4b:8b:6c:ba
    net device: path = /devices/pci0000:00/0000:00:1e.0/0000:01:09.0/ssb0:0
    net driver: name = b43, path = /bus/ssb/drivers/b43
  net interface: name = wmaster0, path = /class/net/wmaster0
    type = 801
    carrier = 1
    hw_addr = 00:90:4b:8b:6c:ba
    net device: path = /devices/pci0000:00/0000:00:1e.0/0000:01:09.0/ssb0:0
    net driver: name = b43, path = /bus/ssb/drivers/b43
  net interface: name = eth0, path = /class/net/eth0
    type = 1
    carrier = 0
    hw_addr = 00:03:25:12:02:e5
    net device: path = /devices/pci0000:00/0000:00:1e.0/0000:01:06.0/ssb1:0
    net driver: name = b44, path = /bus/ssb/drivers/b44
  net interface: name = lo, path = /class/net/lo
    type = 772
    carrier = 1
    hw_addr = 00:00:00:00:00:00
    GDRVINFO ethtool error: Operation not supported
  pan0: ethtool link state: 1
>> pppoe.1: looking for pppoe
>> pppoe.2: discovery
Attempt number 1
pan0: Sending PADI packet
send failed: Network is down
virbr0: Sending PADI packet
eth0: Sending PADI packet
recv failed: Network is down
Timeout waiting for PADO packets
Attempt number 2
pan0: Sending PADI packet
send failed: Network is down
virbr0: Sending PADI packet
eth0: Sending PADI packet
Timeout waiting for PADO packets
>> wlan.1: detecting wlan features
*** device wlan0 is wireless ***
>> wlan.2: assign udi
>> isdn.1: list
>> dsl.1: list
>> int.2: cdrom
>> int.3: media
>> int.4.1: /dev/sda
  read_block0: 512 bytes (4s, 999994us)
  mbr sig: 0x23213b72
>> int.4: floppy
>> int.5: edd
>> int.5.1: bios
  bios ctrl 0: 17
>> int.6: mouse
>> int.15: system info
  system type: notebook
  acpi: 1
>> int.7: hdb
>> int.7.1: modules
>> int.8: usbscsi
>> int.9: hotplug
>> int.10: modem
>> int.11: wlan
>> int.12: udev
-----  udevinfo -----
-----  udevinfo end -----
>> int.13: device names
>> int.14: soft raid
----- soft raid devices -----
----- soft raid devices end -----
>> int.15: geo
>> int.16: parent
  prop read: rdCR.lZF+r4EgHp4 (failed)
  old prop read: rdCR.lZF+r4EgHp4 (failed)
  prop read: rdCR.n_7QNeEnh23 (failed)
  old prop read: rdCR.n_7QNeEnh23 (failed)
  prop read: rdCR.EMpH5pjcahD (failed)
  old prop read: rdCR.EMpH5pjcahD (failed)
  prop read: rdCR.f5u1ucRm+H9 (failed)
  old prop read: rdCR.f5u1ucRm+H9 (failed)
  prop read: rdCR.8uRK7LxiIA2 (failed)
  old prop read: rdCR.8uRK7LxiIA2 (failed)
  prop read: rdCR.AJKleuxpiP0 (failed)
  old prop read: rdCR.AJKleuxpiP0 (failed)
  prop read: rdCR.9N+EecqykME (failed)
  old prop read: rdCR.9N+EecqykME (failed)
  prop read: rdCR.DziBbWO85o5 (failed)
  old prop read: rdCR.DziBbWO85o5 (failed)
  prop read: rdCR.CxwsZFjVASF (failed)
  old prop read: rdCR.CxwsZFjVASF (failed)
  prop read: /org/freedesktop/Hal/devices/pci_14e4_4320 (failed)
  prop read: y9sn.onk47P9RYb5 (failed)
  old prop read: y9sn.onk47P9RYb5 (failed)
  prop read: /org/freedesktop/Hal/devices/pci_14e4_4401 (failed)
  prop read: rBUF.IhC9eApWEv2 (failed)
  old prop read: rBUF.IhC9eApWEv2 (failed)
  prop read: /org/freedesktop/Hal/devices/pci_104c_ac56 (failed)
  prop read: ul7N.387sPtpUro9 (failed)
  old prop read: ul7N.387sPtpUro9 (failed)
  prop read: /org/freedesktop/Hal/devices/pci_8086_24c6 (failed)
  prop read: ORVU.QFYSOgi_dV3 (failed)
  old prop read: ORVU.QFYSOgi_dV3 (failed)
  prop read: /org/freedesktop/Hal/devices/pci_8086_24c5 (failed)
  prop read: W60f.F9vt7YqBKl1 (failed)
  old prop read: W60f.F9vt7YqBKl1 (failed)
  prop read: /org/freedesktop/Hal/devices/pci_8086_24ca (failed)
  prop read: 3p2J.xgyHjZp+Ac9 (failed)
  old prop read: 3p2J.xgyHjZp+Ac9 (failed)
  prop read: /org/freedesktop/Hal/devices/pci_8086_24cc (failed)
  prop read: BUZT.YzqhtMifbpC (failed)
  old prop read: BUZT.YzqhtMifbpC (failed)
  prop read: /org/freedesktop/Hal/devices/pci_8086_2448 (failed)
  prop read: 6NW+.1yBhv2xnpj4 (failed)
  old prop read: 6NW+.1yBhv2xnpj4 (failed)
  prop read: /org/freedesktop/Hal/devices/pci_8086_24cd (failed)
  prop read: 5YuN.1nMouvQh+R9 (failed)
  old prop read: 5YuN.1nMouvQh+R9 (failed)
  prop read: /org/freedesktop/Hal/devices/pci_8086_24c7 (failed)
  prop read: mvRC.RH67kQEiJJ2 (failed)
  old prop read: mvRC.RH67kQEiJJ2 (failed)
  prop read: /org/freedesktop/Hal/devices/pci_8086_24c4 (failed)
  prop read: vayM.u1HtHjtak91 (failed)
  old prop read: vayM.u1HtHjtak91 (failed)
  prop read: /org/freedesktop/Hal/devices/pci_8086_24c2 (failed)
  prop read: 1GTX.sCONKaeAhO0 (failed)
  old prop read: 1GTX.sCONKaeAhO0 (failed)
  prop read: /org/freedesktop/Hal/devices/pci_8086_3582_0 (failed)
  prop read: ruGf.YSrF_d9yLk7 (failed)
  old prop read: ruGf.YSrF_d9yLk7 (failed)
  prop read: /org/freedesktop/Hal/devices/pci_8086_3582 (failed)
  prop read: _Znp.YQQNZM__bV2 (failed)
  old prop read: _Znp.YQQNZM__bV2 (failed)
  prop read: /org/freedesktop/Hal/devices/pci_8086_3585 (failed)
  prop read: QK9O.A7S4+i_I8s5 (failed)
  old prop read: QK9O.A7S4+i_I8s5 (failed)
  prop read: /org/freedesktop/Hal/devices/pci_8086_3584 (failed)
  prop read: hgAj.fiVKW8tbcT5 (failed)
  old prop read: hgAj.fiVKW8tbcT5 (failed)
  prop read: /org/freedesktop/Hal/devices/pci_8086_3580 (failed)
  prop read: qLht.Z2Cd82RKtJ6 (failed)
  old prop read: qLht.Z2Cd82RKtJ6 (failed)
  prop read: /org/freedesktop/Hal/devices/pnp_PNP0c01 (failed)
  prop read: 9fI_.gNN83gfynbD (failed)
  old prop read: 9fI_.gNN83gfynbD (failed)
  prop read: /org/freedesktop/Hal/devices/pnp_SYN0b03 (failed)
  prop read: iT2w.VCXBh8+K+nF (failed)
  old prop read: iT2w.VCXBh8+K+nF (failed)
  prop read: /org/freedesktop/Hal/devices/pnp_PNP0303 (failed)
  prop read: H20r.xhndlW9HXJ7 (failed)
  old prop read: H20r.xhndlW9HXJ7 (failed)
  prop read: /org/freedesktop/Hal/devices/pnp_PNP0c02_1 (failed)
  prop read: qslm.B+yZ9Ve8gC1 (failed)
  old prop read: qslm.B+yZ9Ve8gC1 (failed)
  prop read: /org/freedesktop/Hal/devices/pnp_PNP0c02_0 (failed)
  prop read: NhVi.B+yZ9Ve8gC1 (failed)
  old prop read: NhVi.B+yZ9Ve8gC1 (failed)
  prop read: /org/freedesktop/Hal/devices/pnp_INT0800 (failed)
  prop read: hEKD.jDhFyyFrbg5 (failed)
  old prop read: hEKD.jDhFyyFrbg5 (failed)
  prop read: /org/freedesktop/Hal/devices/pnp_PNP0c02 (failed)
  prop read: E349.B+yZ9Ve8gC1 (failed)
  old prop read: E349.B+yZ9Ve8gC1 (failed)
  prop read: /org/freedesktop/Hal/devices/pnp_PNP0c04 (failed)
  prop read: ntp4.DE8RM9cWQQ8 (failed)
  old prop read: ntp4.DE8RM9cWQQ8 (failed)
  prop read: /org/freedesktop/Hal/devices/pnp_PNP0800 (failed)
  prop read: KiZ0.bvKf3UMzZfE (failed)
  old prop read: KiZ0.bvKf3UMzZfE (failed)
  prop read: /org/freedesktop/Hal/devices/pnp_PNP0b00 (failed)
  prop read: tWJy.WYwRElrJa93 (failed)
  old prop read: tWJy.WYwRElrJa93 (failed)
  prop read: /org/freedesktop/Hal/devices/pnp_PNP0200 (failed)
  prop read: QL3u.ld94kxNGZf5 (failed)
  old prop read: QL3u.ld94kxNGZf5 (failed)
  prop read: /org/freedesktop/Hal/devices/pnp_PNP0a03 (failed)
  prop read: z9pp.QBqTp8zQt87 (failed)
  old prop read: z9pp.QBqTp8zQt87 (failed)
  prop read: /org/freedesktop/Hal/devices/storage_model_COMBO_LSC_24082K (failed)
  prop read: KD9E.27J8XYghn29 (failed)
  old prop read: KD9E.27J8XYghn29 (failed)
  prop read: /org/freedesktop/Hal/devices/storage_serial_SATA_ST94811A_3KW662RS (failed)
  prop read: 3OOL.6s+eBf6t9X6 (failed)
  old prop read: 3OOL.6s+eBf6t9X6 (failed)
  prop read: /org/freedesktop/Hal/devices/volume_uuid_c5c0fe2a_9cf7_4c13_b9f0_fa6ed6e4264d (failed)
  prop read: bdUI.SE1wIdpsiiC (failed)
  old prop read: bdUI.SE1wIdpsiiC (failed)
  prop read: /org/freedesktop/Hal/devices/volume_part2_size_1024 (failed)
  prop read: 2pkM.SE1wIdpsiiC (failed)
  old prop read: 2pkM.SE1wIdpsiiC (failed)
  prop read: /org/freedesktop/Hal/devices/volume_uuid_3ec16031_4690_44e5_a592_b64fad5511a5 (failed)
  prop read: QLVZ.SE1wIdpsiiC (failed)
  old prop read: QLVZ.SE1wIdpsiiC (failed)
  prop read: /org/freedesktop/Hal/devices/usb_device_4d9_499_noserial_if0 (failed)
  prop read: KRJj.EG8AbnisHi9 (failed)
  old prop read: KRJj.EG8AbnisHi9 (failed)
  prop read: /org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2_if0 (failed)
  prop read: zPk0.RTX9xWW_uz4 (failed)
  old prop read: zPk0.RTX9xWW_uz4 (failed)
  prop read: /org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1_if0 (failed)
  prop read: uIhY.gkSaZmjGyhD (failed)
  old prop read: uIhY.gkSaZmjGyhD (failed)
  prop read: /org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0_if0 (failed)
  prop read: pBe4.v+N+B0xY+P6 (failed)
  old prop read: pBe4.v+N+B0xY+P6 (failed)
  prop read: /org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7_if0 (failed)
  prop read: k4bc.9T1GDCLyFd9 (failed)
  old prop read: k4bc.9T1GDCLyFd9 (failed)
  prop read: /org/freedesktop/Hal/devices/computer_logicaldev_input_3 (failed)
  prop read: kZYT.VdKNesd9pT6 (failed)
  old prop read: kZYT.VdKNesd9pT6 (failed)
  prop read: /org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input (failed)
  prop read: 3FDI.+49ps10DtUF (failed)
  old prop read: 3FDI.+49ps10DtUF (failed)
  prop read: /org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input (failed)
  prop read: AH6Q.aaw02jN0uv2 (failed)
  old prop read: AH6Q.aaw02jN0uv2 (failed)
  prop read: rdCR.j8NaKXDZtZ6 (failed)
  old prop read: rdCR.j8NaKXDZtZ6 (failed)
  prop read: wkFv.j8NaKXDZtZ6 (failed)
  old prop read: wkFv.j8NaKXDZtZ6 (failed)
  prop read: fLK9.ndpeucax6V1 (failed)
  old prop read: fLK9.ndpeucax6V1 (failed)
  prop read: j2Yp.ndpeucax6V1 (failed)
  old prop read: j2Yp.ndpeucax6V1 (failed)
  prop read: AYEt.QXn1l67RSa1 (failed)
  old prop read: AYEt.QXn1l67RSa1 (failed)
  prop read: agy+.GSopYcFr9cF (failed)
  old prop read: agy+.GSopYcFr9cF (failed)
  prop read: usDW.ndpeucax6V1 (failed)
  old prop read: usDW.ndpeucax6V1 (failed)
  prop read: ZsBS.GQNx7L4uPNA (failed)
  old prop read: ZsBS.GQNx7L4uPNA (failed)
----- /proc/modules -----
  st 44956 0 - Live 0xdeb75000
  lp 17156 0 - Live 0xdeb0d000
  parport_pc 40100 0 - Live 0xdeb63000
  binfmt_misc 16776 1 - Live 0xdeb01000
  rfkill_input 12800 0 - Live 0xdea9e000
  ppdev 15620 0 - Live 0xdea51000
  bnep 20224 2 - Live 0xdea29000
  i915 67844 2 - Live 0xdeb8a000
  ipt_MASQUERADE 10752 1 - Live 0xdeaea000
  drm 96424 3 i915, Live 0xdebd4000
  iptable_nat 13700 1 - Live 0xdea91000
  nf_nat 25876 2 ipt_MASQUERADE,iptable_nat, Live 0xdea40000
  nf_conntrack_ipv4 21388 4 iptable_nat,nf_nat, Live 0xde9e6000
  nf_defrag_ipv4 9984 1 nf_conntrack_ipv4, Live 0xde8f7000
  xt_state 10112 1 - Live 0xde8c6000
  nf_conntrack 72008 5 ipt_MASQUERADE,iptable_nat,nf_nat,nf_conntrack_ipv4,xt_state, Live 0xdea15000
  ipt_REJECT 11136 2 - Live 0xdea4c000
  ipmi_msghandler 42200 0 - Live 0xdea33000
  xt_tcpudp 11008 4 - Live 0xde9e1000
  iptable_filter 10752 1 - Live 0xde8cf000
  ip_tables 19600 2 iptable_nat,iptable_filter, Live 0xde80f000
  x_tables 23044 6 ipt_MASQUERADE,iptable_nat,xt_state,ipt_REJECT,xt_tcpudp,ip_tables, Live 0xde9c5000
  bridge 56212 0 - Live 0xde8e7000
  stp 10500 1 bridge, Live 0xde8bb000
  lock_dlm 22564 0 - Live 0xdeff5000
  gfs2 363692 1 lock_dlm, Live 0xdef8d000
  dlm 125200 1 lock_dlm, Live 0xdef23000
  configfs 33304 2 dlm, Live 0xdeeeb000
  usbhid 42336 0 - Live 0xdee72000
  parport 42220 3 lp,parport_pc,ppdev, Live 0xded74000
  snd_hda_intel 424724 0 - Live 0xdecd8000
  snd_hwdep 15236 1 snd_hda_intel, Live 0xdec44000
  snd_ac97_codec 110880 0 - Live 0xdebfc000
  arc4 9856 2 - Live 0xdebcf000
  ac97_bus 9856 1 snd_ac97_codec, Live 0xdebc2000
  ecb 10752 2 - Live 0xdebb5000
  snd_pcm_oss 45984 0 - Live 0xdeb9e000
  snd_mixer_oss 22656 1 snd_pcm_oss, Live 0xdeb82000
  joydev 18368 0 - Live 0xdeb6e000
  snd_pcm 82948 3 snd_hda_intel,snd_ac97_codec,snd_pcm_oss, Live 0xdeb4c000
  snd_seq_dummy 10884 0 - Live 0xdeb28000
  snd_seq_oss 39296 0 - Live 0xdeb13000
  pcmcia 44748 0 - Live 0xdeaf4000
  b43 131484 0 - Live 0xdeabe000
  snd_seq_midi 14240 0 - Live 0xde9fe000
  snd_rawmidi 29472 1 snd_seq_midi, Live 0xde9d3000
  mac80211 217592 1 b43, Live 0xdea59000
  snd_seq_midi_event 15232 2 snd_seq_oss,snd_seq_midi, Live 0xde9bf000
  snd_seq 57456 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event, Live 0xde994000
  cfg80211 38288 1 mac80211, Live 0xde8db000
  snd_timer 29320 2 snd_pcm,snd_seq, Live 0xde87b000
  snd_seq_device 15372 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq, Live 0xde7f9000
  yenta_socket 32396 1 - Live 0xdea04000
  rsrc_nonstatic 19328 1 yenta_socket, Live 0xde9ed000
  led_class 12036 1 b43, Live 0xde9dc000
  iTCO_wdt 19108 0 - Live 0xde9cc000
  iTCO_vendor_support 11652 1 iTCO_wdt, Live 0xde9ba000
  pcmcia_core 43540 3 pcmcia,yenta_socket,rsrc_nonstatic, Live 0xde9a4000
  input_polldev 11912 1 b43, Live 0xde8fb000
  snd 65444 12 snd_hda_intel,snd_hwdep,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_dummy,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device, Live 0xde982000
  soundcore 15200 1 snd, Live 0xde8d5000
  video 25872 0 - Live 0xde8a0000
  snd_page_alloc 17032 2 snd_hda_intel,snd_pcm, Live 0xde871000
  intel_agp 34108 1 - Live 0xde82c000
  agpgart 42696 4 drm,intel_agp, Live 0xde893000
  psmouse 61972 0 - Live 0xde8a9000
  shpchp 40212 0 - Live 0xde884000
  output 11008 1 video, Live 0xde86c000
  serio_raw 13444 0 - Live 0xde860000
  pcspkr 10496 0 - Live 0xde827000
  b44 35984 0 - Live 0xde851000
  mii 13312 1 b44, Live 0xde81c000
  ssb 41220 2 b43,b44, Live 0xde844000
  fbcon 46112 0 - Live 0xde836000
  tileblit 10752 1 fbcon, Live 0xde822000
  font 16384 1 fbcon, Live 0xde816000
  bitblit 13824 1 fbcon, Live 0xde809000
  softcursor 9984 1 bitblit, Live 0xde7fe000
----- /proc/modules end -----
  used irqs: 0,1,3,8,9,12,14,15,16,17,18,19,23
=========== end debug info ============
01: None 00.0: 10105 BIOS
  [Created at bios.176]
  Unique ID: rdCR.lZF+r4EgHp4
  Hardware Class: bios
  BIOS Keyboard LED Status:
    Scroll Lock: off
    Num Lock: off
    Caps Lock: off
  Base Memory: 639 kB
  PnP BIOS: @@@0000
  MP spec rev 1.4 info:
    OEM id: "TEMPLATE"
    Product id: "ETEMPLATE"
    1 CPUs (0 disabled)
  SMBIOS Version: 2.3
  BIOS Info: #0
    Vendor: "AMI"
    Version: "NOTE BIOS Version /52.00.12"
    Date: "07/19/2004"
    Start Address: 0xf0000
    ROM Size: 512 kB
    Features: 0x0387000000007cb9df90
      ISA supported
      PCI supported
      PCMCIA supported
      PnP supported
      APM supported
      BIOS flashable
      BIOS shadowing allowed
      ESCD supported
      CD boot supported
      Selectable boot supported
      EDD spec supported
      1.2MB NEC 9800 Japanese Floppy supported
      1.2MB Toshiba Japanese Floppy supported
      1.2MB Floppy supported
      Print Screen supported
      8042 Keyboard Services supported
      Serial Services supported
      Printer Services supported
      CGA/Mono Video supported
      ACPI supported
      USB Legacy supported
      AGP supported
      Smart Battery supported
      BIOS Boot Spec supported
      F12 Network boot supported
  System Info: #1
    Manufacturer: "Gateway"
    Product: "Gateway M520"
    Version: "52.00.12"
    Serial: "1101121163"
    UUID: undefined, but settable
    Wake-up: 0x06 (Power Switch)
  Board Info: #2
    Manufacturer: "Gateway"
    Product: "Gateway M520"
    Version: "KBC K52.00.06"
    Serial: "0123456789012345"
  Chassis Info: #3
    Manufacturer: "Gateway"
    Version: "Rev 1.0"
    Type: 0x0a (Notebook)
    Bootup State: 0x02 (Unknown)
    Power Supply State: 0x02 (Unknown)
    Thermal State: 0x02 (Unknown)
    Security Status: 0x02 (Unknown)
    OEM Info: 0x00001234
  Processor Info: #4
    Socket: "Socket 478"
    Socket Type: 0x0f (Socket 478)
    Socket Status: Populated
    Type: 0x03 (CPU)
    Family: 0xb2 (Pentium 4)
    Manufacturer: "Intel Corporation"
    Version: "Mobile Intel(R) Pentium(R) 4 CPU 2.80GHz"
    Serial: "."
    Asset Tag: "."
    Part Number: "."
    Processor ID: 0xbfebfbff00000f34
    Status: 0x01 (Enabled)
    Voltage: 1.2 V
    External Clock: 533 MHz
    Max. Speed: 2800 MHz
    Current Speed: 1867 MHz
    L1 Cache: #5
    L2 Cache: #6
  Cache Info: #5
    Designation: "Internal"
    Level: L1
    State: Enabled
    Mode: 0x01 (Write Back)
    Location: 0x00 (Internal, Not Socketed)
    ECC: 0x03 (None)
    Type: 0x01 (Other)
    Associativity: 0x05 (4-way Set-Associative)
    Max. Size: 16 kB
    Current Size: 16 kB
    Supported SRAM Types: 0x0001 (Other)
    Current SRAM Type: 0x0001 (Other)
  Cache Info: #6
    Designation: "Internal"
    Level: L2
    State: Enabled
    Mode: 0x01 (Write Back)
    Location: 0x00 (Internal, Not Socketed)
    ECC: 0x03 (None)
    Type: 0x01 (Other)
    Associativity: 0x01 (Other)
    Max. Size: 1024 kB
    Current Size: 1024 kB
    Supported SRAM Types: 0x0010 (Pipeline Burst)
    Current SRAM Type: 0x0010 (Pipeline Burst)
  Type 5 Record: #7
    Data 00: 05 14 07 00 03 04 03 03 0a 01 00 01 05 00 02 08
    Data 10: 00 09 00 02
  Type 6 Record: #8
    Data 00: 06 0c 08 00 01 01 00 00 05 88 88 00
    String 1: "Memory Slot1"
  Type 6 Record: #9
    Data 00: 06 0c 09 00 01 23 00 00 05 88 88 00
    String 1: "Memory Slot2"
  Port Connector: #10
    Type: 0xff (Other)
    Internal Designator: "J1A1"
    External Designator: "Keyboard/Mouse"
    External Connector: 0x0f (PS/2)
  Port Connector: #11
    Type: 0x10 (USB)
    Internal Designator: "J2A1"
    External Designator: "USBPort1"
    External Connector: 0x12 (Access Bus [USB])
  Port Connector: #12
    Type: 0x10 (USB)
    Internal Designator: "J2A2"
    External Designator: "USBPort2"
    External Connector: 0x12 (Access Bus [USB])
  Port Connector: #13
    Type: 0x10 (USB)
    Internal Designator: "J2A3"
    External Designator: "USBPort3"
    External Connector: 0x12 (Access Bus [USB])
  Port Connector: #14
    Type: 0x10 (USB)
    Internal Designator: "J2A4"
    External Designator: "USBPort4"
    External Connector: 0x12 (Access Bus [USB])
  Port Connector: #15
    Type: 0x11 (FireWire [IEEE P1394])
    Internal Designator: "J3A1"
    External Designator: "IEEE1394"
    External Connector: 0x21 (1394)
  Port Connector: #16
    Type: 0x1d (Audio Port)
    Internal Designator: "J4A1"
    External Designator: "Mic In"
    External Connector: 0x1f (Mini-jack [headphones])
  Port Connector: #17
    Type: 0x1d (Audio Port)
    Internal Designator: "J4A2"
    External Designator: "Head Phone/Line Out"
    External Connector: 0x1f (Mini-jack [headphones])
  Port Connector: #18
    Type: 0x1d (Audio Port)
    Internal Designator: "J4A3"
    External Designator: "S/PDIF Out"
    External Connector: 0xff (Other)
  Port Connector: #19
    Type: 0x09 (Serial Port 16550A Compatible)
    Internal Designator: "J5A1"
    External Designator: "Serial Port"
    External Connector: 0x08 (DB-9 pin male)
  Port Connector: #20
    Type: 0xff (Other)
    Internal Designator: "J5A2"
    External Designator: "Infrared Device"
    External Connector: 0x10 (Infrared)
  Port Connector: #21
    Type: 0x05 (Parallel Port ECP/EPP)
    Internal Designator: "J5A3"
    External Designator: "Parallel Port"
    External Connector: 0x05 (DB-25 pin female)
  Port Connector: #22
    Type: 0x1c (Video Port)
    Internal Designator: "J6A1"
    External Designator: "Monitor"
    External Connector: 0x07 (DB-15 pin female)
  Port Connector: #23
    Type: 0x1e (Modem Port)
    Internal Designator: "J7A1"
    External Designator: "Telephone Line"
    External Connector: 0x0a (RJ-11)
  Port Connector: #24
    Type: 0x1f (Network Port)
    Internal Designator: "J8A1"
    External Designator: "Network"
    External Connector: 0x0b (RJ-45)
  Port Connector: #25
    Internal Designator: "J8A2"
    External Designator: "Network Port"
    External Connector: 0xff (Other)
  Port Connector: #26
    Type: 0x1c (Video Port)
    Internal Designator: "J9A1"
    External Designator: "S-Video"
    External Connector: 0x0d (Mini-DIN)
  System Slot: #27
    Designation: "Socket 1"
    Type: 0x07 (PC Card [PCMCIA])
    Bus Width: 0x05 (32 bit)
    Status: 0x02 (Unknown)
    Length: 0x01 (Other)
    Slot ID: 256
    Characteristics: 0x01b6 (5.0 V, 3.3 V, PC Card-16, CardBus, Modem Ring Resume, PME#)
  System Slot: #28
    Designation: "Socket 2"
    Type: 0x07 (PC Card [PCMCIA])
    Bus Width: 0x05 (32 bit)
    Status: 0x02 (Unknown)
    Length: 0x01 (Other)
    Slot ID: 512
    Characteristics: 0x01b6 (5.0 V, 3.3 V, PC Card-16, CardBus, Modem Ring Resume, PME#)
  On Board Devices: #29
    Video: "Intel VGA"
  On Board Devices: #30
    Sound: "AD1981/ADI"
  On Board Devices: #31
    Other: "Scorpio/Lucet"
  On Board Devices: #32
    Other: "R5C529/Ricoh"
  On Board Devices: #33
    Ethernet: "82551QM/Intel(10/100)/82541EI/Intel(GbE)"
  On Board Devices: #34
    Ethernet: "ALPS"
  OEM Strings: #35
  Language Info: #36
    Languages: en|US|, ja|JP|
    Current: ja|JP|
  Physical Memory Array: #37
    Use: 0x05 (Flash memory)
    Location: 0x03 (Motherboard)
    Slots: 1
    Max. Size: 512 kB
    ECC: 0x03 (None)
  Physical Memory Array: #38
    Use: 0x04 (Video memory)
    Location: 0x03 (Motherboard)
    Slots: 1
    Max. Size: 32 MB
    ECC: 0x03 (None)
  Physical Memory Array: #39
    Use: 0x03 (System memory)
    Location: 0x03 (Motherboard)
    Slots: 2
    Max. Size: 2 GB
    ECC: 0x03 (None)
  Memory Device: #40
    Location: "U12"
    Bank: "Null"
    Memory Array: #39
    Form Factor: 0x01 (Other)
    Type: 0x09 (FLASH)
    Type Detail: 0x1000 (Non-volatile)
    Data Width: 4 bits
    Size: 512 kB
  Memory Device: #41
    Location: "U1B.U1C.U1D.U1E"
    Bank: "Null"
    Memory Array: #40
    Form Factor: 0x01 (Other)
    Type: 0x12 (DDR)
    Type Detail: 0x0080 (Synchronous)
    Data Width: 0 bits (+2 ECC bits)
    Size: 32 MB
    Speed: 200 MHz
  Memory Device: #42
    Location: "DIMM501"
    Bank: "Null"
    Memory Array: #41
    Form Factor: 0x09 (DIMM)
    Type: 0x12 (DDR)
    Type Detail: 0x0002 (Other)
    Data Width: 64 bits
    Size: 256 MB
    Speed: 333 MHz
  Memory Device: #43
    Location: "DIMM500"
    Bank: "Null"
    Memory Array: #41
    Form Factor: 0x09 (DIMM)
    Type: 0x12 (DDR)
    Type Detail: 0x0002 (Other)
    Data Width: 64 bits
    Size: 256 MB
    Speed: 333 MHz
  Memory Array Mapping: #44
    Memory Array: #37
    Partition Width: 1
    Start Address: 0x00000000
    End Address: 0x00080000
  Memory Array Mapping: #45
    Memory Array: #38
    Partition Width: 1
    Start Address: 0x0000000000000000
    End Address: 0x0000000800000000
  Memory Array Mapping: #46
    Memory Array: #39
    Partition Width: 1
    Start Address: 0x00000000
    End Address: 0x1e000000
  Memory Device Mapping: #47
    Memory Device: #40
    Array Mapping: #46
    Row: 1
    Interleave Pos: 0
    Interleaved Depth: 0
    Start Address: 0x00000000
    End Address: 0x00080000
  Memory Device Mapping: #48
    Memory Device: #41
    Array Mapping: #47
    Row: 1
    Interleave Pos: 0
    Interleaved Depth: 0
    Start Address: 0x00000000
    End Address: 0x07f80000
  Memory Device Mapping: #49
    Memory Device: #42
    Array Mapping: #48
    Row: 1
    Interleave Pos: 0
    Interleaved Depth: 0
    Start Address: 0x00000000
    End Address: 0x10000000
  Memory Device Mapping: #50
    Memory Device: #43
    Array Mapping: #48
    Row: 1
    Interleave Pos: 0
    Interleaved Depth: 0
    Start Address: 0x00000000
    End Address: 0x10000000
  Pointing Device: #51
    Type: 0x06 (Glide Point)
    Interface: 0x04 (PS/2)
    Buttons: 4
  Type 22 Record: #52
    Data 00: 16 1a 34 00 01 02 03 04 05 06 ff ff d0 39 06 ff
    Data 10: 00 00 00 00 00 00 00 00 00 00
    String 1: "in the Front, on the right-hand side"
    String 2: "E-MACHINE"
    String 3: "."
    String 4: "."
    String 5: "Li4402A"
    String 6: "."
  Type 32 Record: #53
    Data 00: 20 14 35 00 00 00 00 00 00 00 00 00 00 00 00 00
    Data 10: 00 00 00 00
  Config Status: cfg=new, avail=yes, need=no, active=unknown

02: None 00.0: 10107 System
  [Created at sys.63]
  Unique ID: rdCR.n_7QNeEnh23
  Hardware Class: system
  Model: "System"
  Formfactor: "laptop"
  Driver Info #0:
    Driver Status: thermal,fan are not active
    Driver Activation Cmd: "modprobe thermal; modprobe fan"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

03: None 00.0: 10104 FPU
  [Created at misc.192]
  Unique ID: rdCR.EMpH5pjcahD
  Hardware Class: unknown
  Model: "FPU"
  I/O Ports: 0xf0-0xff (rw)
  Config Status: cfg=new, avail=yes, need=no, active=unknown

04: None 00.0: 0801 DMA controller (8237)
  [Created at misc.206]
  Unique ID: rdCR.f5u1ucRm+H9
  Hardware Class: unknown
  Model: "DMA controller"
  I/O Ports: 0x00-0x1f (rw)
  I/O Ports: 0xc0-0xdf (rw)
  I/O Ports: 0x80-0x8f (rw)
  DMA: 4
  Config Status: cfg=new, avail=yes, need=no, active=unknown

05: None 00.0: 0800 PIC (8259)
  [Created at misc.219]
  Unique ID: rdCR.8uRK7LxiIA2
  Hardware Class: unknown
  Model: "PIC"
  I/O Ports: 0x20-0x21 (rw)
  I/O Ports: 0xa0-0xa1 (rw)
  Config Status: cfg=new, avail=yes, need=no, active=unknown

06: None 00.0: 0802 Timer (8254)
  [Created at misc.230]
  Unique ID: rdCR.AJKleuxpiP0
  Hardware Class: unknown
  Model: "Timer"
  IRQ: 0 (169 events)
  Config Status: cfg=new, avail=yes, need=no, active=unknown

07: None 00.0: 0900 Keyboard controller
  [Created at misc.251]
  Unique ID: rdCR.9N+EecqykME
  Hardware Class: unknown
  Model: "Keyboard controller"
  I/O Port: 0x60 (rw)
  I/O Port: 0x64 (rw)
  Config Status: cfg=new, avail=yes, need=no, active=unknown

08: None 00.0: 10400 PS/2 Controller
  [Created at misc.304]
  Unique ID: rdCR.DziBbWO85o5
  Hardware Class: unknown
  Model: "PS/2 Controller"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

11: None 00.0: 10102 Main Memory
  [Created at memory.61]
  Unique ID: rdCR.CxwsZFjVASF
  Hardware Class: memory
  Model: "Main Memory"
  Memory Range: 0x00000000-0x1dfcffff (rw)
  Memory Size: 480 MB
  Config Status: cfg=new, avail=yes, need=no, active=unknown

12: PCI 109.0: 0282 WLAN controller
  [Created at pci.314]
  UDI: /org/freedesktop/Hal/devices/pci_14e4_4320
  Unique ID: y9sn.onk47P9RYb5
  Parent ID: 6NW+.1yBhv2xnpj4
  SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:01:09.0
  SysFS BusID: 0000:01:09.0
  Hardware Class: network
  Model: "Broadcom BCM4306 802.11b/g Wireless LAN Controller"
  Vendor: pci 0x14e4 "Broadcom"
  Device: pci 0x4320 "BCM4306 802.11b/g Wireless LAN Controller"
  SubVendor: pci 0x14e4 "Broadcom"
  SubDevice: pci 0x0418
  Revision: 0x03
  Driver: "b43-pci-bridge"
  Driver Modules: "ssb"
  Device File: wlan0
  Features: WLAN
  Memory Range: 0xe00fc000-0xe00fdfff (rw,non-prefetchable)
  IRQ: 18 (48035 events)
  HW Address: 00:90:4b:8b:6c:ba
  Link detected: yes
  WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13 14
  WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472 2.484
  WLAN encryption modes: WEP40 WEP104 TKIP CCMP
  WLAN authentication modes: open sharedkey wpa-psk wpa-eap
  Module Alias: "pci:v000014E4d00004320sv000014E4sd00000418bc02sc80i00"
  Driver Info #0:
    Driver Status: ssb is active
    Driver Activation Cmd: "modprobe ssb"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #19 (PCI bridge)

13: PCI 106.0: 0200 Ethernet controller
  [Created at pci.314]
  UDI: /org/freedesktop/Hal/devices/pci_14e4_4401
  Unique ID: rBUF.IhC9eApWEv2
  Parent ID: 6NW+.1yBhv2xnpj4
  SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:01:06.0
  SysFS BusID: 0000:01:06.0
  Hardware Class: network
  Model: "Broadcom BCM4401 100Base-T"
  Vendor: pci 0x14e4 "Broadcom"
  Device: pci 0x4401 "BCM4401 100Base-T"
  SubVendor: pci 0x161f "Rioworks"
  SubDevice: pci 0x2029
  Revision: 0x01
  Driver: "b44"
  Driver Modules: "ssb", "b44"
  Device File: eth0
  Memory Range: 0xe00fe000-0xe00fffff (rw,non-prefetchable)
  Memory Range: 0x24000000-0x2401ffff (ro,prefetchable,disabled)
  IRQ: 19 (59378 events)
  HW Address: 00:03:25:12:02:e5
  Link detected: no
  Module Alias: "pci:v000014E4d00004401sv0000161Fsd00002029bc02sc00i00"
  Driver Info #0:
    Driver Status: b44 is active
    Driver Activation Cmd: "modprobe b44"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #19 (PCI bridge)

14: PCI 105.0: 0607 CardBus bridge
  [Created at pci.314]
  UDI: /org/freedesktop/Hal/devices/pci_104c_ac56
  Unique ID: ul7N.387sPtpUro9
  Parent ID: 6NW+.1yBhv2xnpj4
  SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:01:05.0
  SysFS BusID: 0000:01:05.0
  Hardware Class: bridge
  Model: "Texas Instruments PCI1510 PC card Cardbus Controller"
  Vendor: pci 0x104c "Texas Instruments"
  Device: pci 0xac56 "PCI1510 PC card Cardbus Controller"
  SubVendor: pci 0x161f "Rioworks"
  SubDevice: pci 0x202f
  Driver: "yenta_cardbus"
  Driver Modules: "yenta_socket"
  Memory Range: 0xe0000000-0xe0000fff (rw,non-prefetchable)
  IRQ: 17 (1 event)
  Module Alias: "pci:v0000104Cd0000AC56sv0000161Fsd0000202Fbc06sc07i00"
  Driver Info #0:
    Driver Status: yenta_socket is active
    Driver Activation Cmd: "modprobe yenta_socket"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #19 (PCI bridge)

15: PCI 1f.6: 10204 LinModem
  [Created at pci.314]
  UDI: /org/freedesktop/Hal/devices/pci_8086_24c6
  Unique ID: ORVU.QFYSOgi_dV3
  SysFS ID: /devices/pci0000:00/0000:00:1f.6
  SysFS BusID: 0000:00:1f.6
  Hardware Class: modem
  Model: "Intel 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x24c6 "82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller"
  SubVendor: pci 0x161f "Rioworks"
  SubDevice: pci 0x202f
  Revision: 0x03
  Device File: /dev/ttySL0
  Device Number: char 212:0
  I/O Ports: 0xe800-0xe8ff (rw)
  I/O Ports: 0xec00-0xec7f (rw)
  IRQ: 17 (1 event)
  Module Alias: "pci:v00008086d000024C6sv0000161Fsd0000202Fbc07sc03i00"
  Driver Info #0:
    Driver Status: snd_intel8x0m is not active
    Driver Activation Cmd: "modprobe snd_intel8x0m"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

16: PCI 1f.5: 0401 Multimedia audio controller
  [Created at pci.314]
  UDI: /org/freedesktop/Hal/devices/pci_8086_24c5
  Unique ID: W60f.F9vt7YqBKl1
  SysFS ID: /devices/pci0000:00/0000:00:1f.5
  SysFS BusID: 0000:00:1f.5
  Hardware Class: sound
  Model: "Intel 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x24c5 "82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller"
  SubVendor: pci 0x161f "Rioworks"
  SubDevice: pci 0x202f
  Revision: 0x03
  I/O Ports: 0xe400-0xe4ff (rw)
  I/O Ports: 0xee80-0xeebf (rw)
  Memory Range: 0xe02ff800-0xe02ff9ff (rw,non-prefetchable)
  Memory Range: 0xe02ff400-0xe02ff4ff (rw,non-prefetchable)
  IRQ: 3 (no events)
  Module Alias: "pci:v00008086d000024C5sv0000161Fsd0000202Fbc04sc01i00"
  Driver Info #0:
    Driver Status: snd_intel8x0 is not active
    Driver Activation Cmd: "modprobe snd_intel8x0"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

17: PCI 1f.1: 0101 IDE interface
  [Created at pci.314]
  UDI: /org/freedesktop/Hal/devices/pci_8086_24ca
  Unique ID: 3p2J.xgyHjZp+Ac9
  SysFS ID: /devices/pci0000:00/0000:00:1f.1
  SysFS BusID: 0000:00:1f.1
  Hardware Class: storage
  Model: "Intel 82801DBM (ICH4-M) IDE Controller"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x24ca "82801DBM (ICH4-M) IDE Controller"
  SubVendor: pci 0x161f "Rioworks"
  SubDevice: pci 0x202f
  Revision: 0x03
  Driver: "ata_piix"
  I/O Ports: 0x1f0-0x1f7 (rw)
  I/O Port: 0x3f6 (rw)
  I/O Ports: 0x170-0x177 (rw)
  I/O Port: 0x376 (rw)
  I/O Ports: 0xffa0-0xffaf (rw)
  Memory Range: 0x26000000-0x260003ff (rw,non-prefetchable)
  IRQ: 18 (48035 events)
  Module Alias: "pci:v00008086d000024CAsv0000161Fsd0000202Fbc01sc01i8a"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

18: PCI 1f.0: 0601 ISA bridge
  [Created at pci.314]
  UDI: /org/freedesktop/Hal/devices/pci_8086_24cc
  Unique ID: BUZT.YzqhtMifbpC
  SysFS ID: /devices/pci0000:00/0000:00:1f.0
  SysFS BusID: 0000:00:1f.0
  Hardware Class: bridge
  Model: "Intel 82801DBM (ICH4-M) LPC Interface Bridge"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x24cc "82801DBM (ICH4-M) LPC Interface Bridge"
  Revision: 0x03
  Module Alias: "pci:v00008086d000024CCsv00000000sd00000000bc06sc01i00"
  Driver Info #0:
    Driver Status: intel_rng is not active
    Driver Activation Cmd: "modprobe intel_rng"
  Driver Info #1:
    Driver Status: iTCO_wdt is active
    Driver Activation Cmd: "modprobe iTCO_wdt"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

19: PCI 1e.0: 0604 PCI bridge (Normal decode)
  [Created at pci.314]
  UDI: /org/freedesktop/Hal/devices/pci_8086_2448
  Unique ID: 6NW+.1yBhv2xnpj4
  SysFS ID: /devices/pci0000:00/0000:00:1e.0
  SysFS BusID: 0000:00:1e.0
  Hardware Class: bridge
  Model: "Intel 82801 Mobile PCI Bridge"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x2448 "82801 Mobile PCI Bridge"
  Revision: 0x83
  Module Alias: "pci:v00008086d00002448sv00000000sd00000000bc06sc04i00"
  Driver Info #0:
    Driver Status: shpchp is active
    Driver Activation Cmd: "modprobe shpchp"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

20: PCI 1d.7: 0c03 USB Controller (EHCI)
  [Created at pci.314]
  UDI: /org/freedesktop/Hal/devices/pci_8086_24cd
  Unique ID: 5YuN.1nMouvQh+R9
  SysFS ID: /devices/pci0000:00/0000:00:1d.7
  SysFS BusID: 0000:00:1d.7
  Hardware Class: usb controller
  Model: "Intel 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x24cd "82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller"
  SubVendor: pci 0x161f "Rioworks"
  SubDevice: pci 0x202f
  Revision: 0x03
  Driver: "ehci_hcd"
  Driver Modules: "ehci_hcd"
  Memory Range: 0xe02ffc00-0xe02fffff (rw,non-prefetchable)
  IRQ: 23 (2 events)
  Module Alias: "pci:v00008086d000024CDsv0000161Fsd0000202Fbc0Csc03i20"
  Driver Info #0:
    Driver Status: ehci-hcd is not active
    Driver Activation Cmd: "modprobe ehci-hcd"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

21: PCI 1d.2: 0c03 USB Controller (UHCI)
  [Created at pci.314]
  UDI: /org/freedesktop/Hal/devices/pci_8086_24c7
  Unique ID: mvRC.RH67kQEiJJ2
  SysFS ID: /devices/pci0000:00/0000:00:1d.2
  SysFS BusID: 0000:00:1d.2
  Hardware Class: usb controller
  Model: "Intel 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x24c7 "82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3"
  SubVendor: pci 0x161f "Rioworks"
  SubDevice: pci 0x202f
  Revision: 0x03
  Driver: "uhci_hcd"
  Driver Modules: "uhci_hcd"
  I/O Ports: 0xef80-0xef9f (rw)
  IRQ: 18 (48035 events)
  Module Alias: "pci:v00008086d000024C7sv0000161Fsd0000202Fbc0Csc03i00"
  Driver Info #0:
    Driver Status: uhci-hcd is not active
    Driver Activation Cmd: "modprobe uhci-hcd"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

22: PCI 1d.1: 0c03 USB Controller (UHCI)
  [Created at pci.314]
  UDI: /org/freedesktop/Hal/devices/pci_8086_24c4
  Unique ID: vayM.u1HtHjtak91
  SysFS ID: /devices/pci0000:00/0000:00:1d.1
  SysFS BusID: 0000:00:1d.1
  Hardware Class: usb controller
  Model: "Intel 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x24c4 "82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2"
  SubVendor: pci 0x161f "Rioworks"
  SubDevice: pci 0x202f
  Revision: 0x03
  Driver: "uhci_hcd"
  Driver Modules: "uhci_hcd"
  I/O Ports: 0xef40-0xef5f (rw)
  IRQ: 19 (59378 events)
  Module Alias: "pci:v00008086d000024C4sv0000161Fsd0000202Fbc0Csc03i00"
  Driver Info #0:
    Driver Status: uhci-hcd is not active
    Driver Activation Cmd: "modprobe uhci-hcd"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

23: PCI 1d.0: 0c03 USB Controller (UHCI)
  [Created at pci.314]
  UDI: /org/freedesktop/Hal/devices/pci_8086_24c2
  Unique ID: 1GTX.sCONKaeAhO0
  SysFS ID: /devices/pci0000:00/0000:00:1d.0
  SysFS BusID: 0000:00:1d.0
  Hardware Class: usb controller
  Model: "Intel 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x24c2 "82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1"
  SubVendor: pci 0x161f "Rioworks"
  SubDevice: pci 0x202f
  Revision: 0x03
  Driver: "uhci_hcd"
  Driver Modules: "uhci_hcd"
  I/O Ports: 0xef20-0xef3f (rw)
  IRQ: 16 (1280 events)
  Module Alias: "pci:v00008086d000024C2sv0000161Fsd0000202Fbc0Csc03i00"
  Driver Info #0:
    Driver Status: uhci-hcd is not active
    Driver Activation Cmd: "modprobe uhci-hcd"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

24: PCI 02.1: 0380 Display controller
  [Created at pci.314]
  UDI: /org/freedesktop/Hal/devices/pci_8086_3582_0
  Unique ID: ruGf.YSrF_d9yLk7
  SysFS ID: /devices/pci0000:00/0000:00:02.1
  SysFS BusID: 0000:00:02.1
  Hardware Class: graphics card
  Model: "Intel 855 GM"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x3582 "855 GM"
  SubVendor: pci 0x161f "Rioworks"
  SubDevice: pci 0x202f
  Revision: 0x02
  Memory Range: 0xd0000000-0xd7ffffff (rw,prefetchable)
  Memory Range: 0xe0300000-0xe037ffff (rw,non-prefetchable)
  Module Alias: "pci:v00008086d00003582sv0000161Fsd0000202Fbc03sc80i00"
  Driver Info #0:
    XFree86 v4 Server Module: intel
  Driver Info #1:
    XFree86 v4 Server Module: intel
    3D Support: yes
    Extensions: dri
  Config Status: cfg=new, avail=yes, need=no, active=unknown

25: PCI 02.0: 0300 VGA compatible controller (VGA)
  [Created at pci.314]
  UDI: /org/freedesktop/Hal/devices/pci_8086_3582
  Unique ID: _Znp.YQQNZM__bV2
  SysFS ID: /devices/pci0000:00/0000:00:02.0
  SysFS BusID: 0000:00:02.0
  Hardware Class: graphics card
  Model: "Intel 855 GM"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x3582 "855 GM"
  SubVendor: pci 0x161f "Rioworks"
  SubDevice: pci 0x202f
  Revision: 0x02
  Memory Range: 0xd8000000-0xdfffffff (rw,prefetchable)
  Memory Range: 0xe0380000-0xe03fffff (rw,non-prefetchable)
  I/O Ports: 0xeff0-0xeff7 (rw)
  IRQ: 16 (1280 events)
  I/O Ports: 0x3c0-0x3df (rw)
  Module Alias: "pci:v00008086d00003582sv0000161Fsd0000202Fbc03sc00i00"
  Driver Info #0:
    XFree86 v4 Server Module: intel
  Driver Info #1:
    XFree86 v4 Server Module: intel
    3D Support: yes
    Extensions: dri
  Config Status: cfg=new, avail=yes, need=no, active=unknown

26: PCI 00.3: 0880 System peripheral
  [Created at pci.314]
  UDI: /org/freedesktop/Hal/devices/pci_8086_3585
  Unique ID: QK9O.A7S4+i_I8s5
  SysFS ID: /devices/pci0000:00/0000:00:00.3
  SysFS BusID: 0000:00:00.3
  Hardware Class: unknown
  Model: "Intel 82852/82855 GM/GME/PM/GMV Processor to I/O Controller"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x3585 "82852/82855 GM/GME/PM/GMV Processor to I/O Controller"
  SubVendor: pci 0x161f "Rioworks"
  SubDevice: pci 0x202f
  Revision: 0x02
  Module Alias: "pci:v00008086d00003585sv0000161Fsd0000202Fbc08sc80i00"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

27: PCI 00.1: 0880 System peripheral
  [Created at pci.314]
  UDI: /org/freedesktop/Hal/devices/pci_8086_3584
  Unique ID: hgAj.fiVKW8tbcT5
  SysFS ID: /devices/pci0000:00/0000:00:00.1
  SysFS BusID: 0000:00:00.1
  Hardware Class: unknown
  Model: "Intel 82852/82855 GM/GME/PM/GMV Processor to I/O Controller"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x3584 "82852/82855 GM/GME/PM/GMV Processor to I/O Controller"
  SubVendor: pci 0x161f "Rioworks"
  SubDevice: pci 0x202f
  Revision: 0x02
  Module Alias: "pci:v00008086d00003584sv0000161Fsd0000202Fbc08sc80i00"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

28: PCI 00.0: 0600 Host bridge
  [Created at pci.314]
  UDI: /org/freedesktop/Hal/devices/pci_8086_3580
  Unique ID: qLht.Z2Cd82RKtJ6
  SysFS ID: /devices/pci0000:00/0000:00:00.0
  SysFS BusID: 0000:00:00.0
  Hardware Class: bridge
  Model: "Intel 82852/82855 GM/GME/PM/GMV Processor to I/O Controller"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x3580 "82852/82855 GM/GME/PM/GMV Processor to I/O Controller"
  SubVendor: pci 0x161f "Rioworks"
  SubDevice: pci 0x202f
  Revision: 0x02
  Driver: "agpgart-intel"
  Driver Modules: "intel_agp"
  Module Alias: "pci:v00008086d00003580sv0000161Fsd0000202Fbc06sc00i00"
  Driver Info #0:
    Driver Status: intel_agp is active
    Driver Activation Cmd: "modprobe intel_agp"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

29: ISA(PnP) 00.0: 0000 Unclassified device
  [Created at isapnp.142]
  UDI: /org/freedesktop/Hal/devices/pnp_PNP0c01
  Unique ID: 9fI_.gNN83gfynbD
  SysFS ID: /devices/pnp0/00:0b
  SysFS BusID: 00:0b
  Hardware Class: unknown
  Model: "Unclassified device"
  SubVendor: PNP "PnP"
  SubDevice: eisa 0x0c01
  Config Status: cfg=new, avail=yes, need=no, active=unknown

30: ISA(PnP) 00.0: 0000 Unclassified device
  [Created at isapnp.142]
  UDI: /org/freedesktop/Hal/devices/pnp_SYN0b03
  Unique ID: iT2w.VCXBh8+K+nF
  SysFS ID: /devices/pnp0/00:0a
  SysFS BusID: 00:0a
  Hardware Class: unknown
  Model: "Unclassified device"
  SubVendor: SYN
  SubDevice: eisa 0x0b03
  Config Status: cfg=new, avail=yes, need=no, active=unknown

31: ISA(PnP) 00.0: 0000 Unclassified device
  [Created at isapnp.142]
  UDI: /org/freedesktop/Hal/devices/pnp_PNP0303
  Unique ID: H20r.xhndlW9HXJ7
  SysFS ID: /devices/pnp0/00:09
  SysFS BusID: 00:09
  Hardware Class: unknown
  Model: "Unclassified device"
  SubVendor: PNP "PnP"
  SubDevice: eisa 0x0303
  Config Status: cfg=new, avail=yes, need=no, active=unknown

32: ISA(PnP) 00.0: 0000 Unclassified device
  [Created at isapnp.142]
  UDI: /org/freedesktop/Hal/devices/pnp_PNP0c02_1
  Unique ID: qslm.B+yZ9Ve8gC1
  SysFS ID: /devices/pnp0/00:08
  SysFS BusID: 00:08
  Hardware Class: unknown
  Model: "Unclassified device"
  SubVendor: PNP "PnP"
  SubDevice: eisa 0x0c02
  Config Status: cfg=new, avail=yes, need=no, active=unknown

33: ISA(PnP) 00.0: 0000 Unclassified device
  [Created at isapnp.142]
  UDI: /org/freedesktop/Hal/devices/pnp_PNP0c02_0
  Unique ID: NhVi.B+yZ9Ve8gC1
  SysFS ID: /devices/pnp0/00:07
  SysFS BusID: 00:07
  Hardware Class: unknown
  Model: "Unclassified device"
  SubVendor: PNP "PnP"
  SubDevice: eisa 0x0c02
  Config Status: cfg=new, avail=yes, need=no, active=unknown

34: ISA(PnP) 00.0: 0000 Unclassified device
  [Created at isapnp.142]
  UDI: /org/freedesktop/Hal/devices/pnp_INT0800
  Unique ID: hEKD.jDhFyyFrbg5
  SysFS ID: /devices/pnp0/00:06
  SysFS BusID: 00:06
  Hardware Class: unknown
  Model: "Unclassified device"
  SubVendor: INT
  SubDevice: eisa 0x0800
  Config Status: cfg=new, avail=yes, need=no, active=unknown

35: ISA(PnP) 00.0: 0000 Unclassified device
  [Created at isapnp.142]
  UDI: /org/freedesktop/Hal/devices/pnp_PNP0c02
  Unique ID: E349.B+yZ9Ve8gC1
  SysFS ID: /devices/pnp0/00:05
  SysFS BusID: 00:05
  Hardware Class: unknown
  Model: "Unclassified device"
  SubVendor: PNP "PnP"
  SubDevice: eisa 0x0c02
  Config Status: cfg=new, avail=yes, need=no, active=unknown

36: ISA(PnP) 00.0: 0000 Unclassified device
  [Created at isapnp.142]
  UDI: /org/freedesktop/Hal/devices/pnp_PNP0c04
  Unique ID: ntp4.DE8RM9cWQQ8
  SysFS ID: /devices/pnp0/00:04
  SysFS BusID: 00:04
  Hardware Class: unknown
  Model: "Unclassified device"
  SubVendor: PNP "PnP"
  SubDevice: eisa 0x0c04
  Config Status: cfg=new, avail=yes, need=no, active=unknown

37: ISA(PnP) 00.0: 0000 Unclassified device
  [Created at isapnp.142]
  UDI: /org/freedesktop/Hal/devices/pnp_PNP0800
  Unique ID: KiZ0.bvKf3UMzZfE
  SysFS ID: /devices/pnp0/00:03
  SysFS BusID: 00:03
  Hardware Class: unknown
  Model: "Unclassified device"
  SubVendor: PNP "PnP"
  SubDevice: eisa 0x0800
  Config Status: cfg=new, avail=yes, need=no, active=unknown

38: ISA(PnP) 00.0: 0000 Unclassified device
  [Created at isapnp.142]
  UDI: /org/freedesktop/Hal/devices/pnp_PNP0b00
  Unique ID: tWJy.WYwRElrJa93
  SysFS ID: /devices/pnp0/00:02
  SysFS BusID: 00:02
  Hardware Class: unknown
  Model: "Unclassified device"
  SubVendor: PNP "PnP"
  SubDevice: eisa 0x0b00
  Config Status: cfg=new, avail=yes, need=no, active=unknown

39: ISA(PnP) 00.0: 0000 Unclassified device
  [Created at isapnp.142]
  UDI: /org/freedesktop/Hal/devices/pnp_PNP0200
  Unique ID: QL3u.ld94kxNGZf5
  SysFS ID: /devices/pnp0/00:01
  SysFS BusID: 00:01
  Hardware Class: unknown
  Model: "Unclassified device"
  SubVendor: PNP "PnP"
  SubDevice: eisa 0x0200
  Config Status: cfg=new, avail=yes, need=no, active=unknown

40: ISA(PnP) 00.0: 0000 Unclassified device
  [Created at isapnp.142]
  UDI: /org/freedesktop/Hal/devices/pnp_PNP0a03
  Unique ID: z9pp.QBqTp8zQt87
  SysFS ID: /devices/pnp0/00:00
  SysFS BusID: 00:00
  Hardware Class: unknown
  Model: "Unclassified device"
  SubVendor: PNP "PnP"
  SubDevice: eisa 0x0a03
  Config Status: cfg=new, avail=yes, need=no, active=unknown

41: SCSI 100.0: 10602 CD-ROM
  [Created at block.247]
  UDI: /org/freedesktop/Hal/devices/storage_model_COMBO_LSC_24082K
  Unique ID: KD9E.27J8XYghn29
  Parent ID: 3p2J.xgyHjZp+Ac9
  SysFS ID: /class/block/sr0
  SysFS BusID: 1:0:0:0
  SysFS Device Link: /devices/pci0000:00/0000:00:1f.1/host1/target1:0:0/1:0:0:0
  Hardware Class: cdrom
  Model: "Slimtype COMBO LSC-24082K"
  Vendor: "Slimtype"
  Device: "COMBO LSC-24082K"
  Revision: "JBK2"
  Driver: "ata_piix", "sr"
  Device File: /dev/sr0 (/dev/sg1)
  Device Number: block 11:0 (char 21:1)
  Features: CD-R, CD-RW
  Drive status: no medium
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #17 (IDE interface)
  Drive Speed: 24

42: IDE 00.0: 10600 Disk
  [Created at block.243]
  UDI: /org/freedesktop/Hal/devices/storage_serial_SATA_ST94811A_3KW662RS
  Unique ID: 3OOL.6s+eBf6t9X6
  Parent ID: 3p2J.xgyHjZp+Ac9
  SysFS ID: /class/block/sda
  SysFS BusID: 0:0:0:0
  SysFS Device Link: /devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0
  Hardware Class: disk
  Model: "ST94811A"
  Device: "ST94811A"
  Revision: "3.05"
  Serial ID: "3KW662RS"
  Driver: "ata_piix", "sd"
  Device File: /dev/sda
  Device Number: block 8:0-8:15
  BIOS id: 0x80
  Geometry (Logical): CHS 4864/255/63
  Size: 78140160 sectors a 512 bytes
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #17 (IDE interface)

43: None 00.0: 11300 Partition
  [Created at block.412]
  UDI: /org/freedesktop/Hal/devices/volume_uuid_c5c0fe2a_9cf7_4c13_b9f0_fa6ed6e4264d
  Unique ID: bdUI.SE1wIdpsiiC
  Parent ID: 3OOL.6s+eBf6t9X6
  SysFS ID: /class/block/sda/sda1
  Hardware Class: partition
  Model: "Partition"
  Device File: /dev/sda1
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #42 (Disk)

44: None 00.0: 11300 Partition
  [Created at block.412]
  UDI: /org/freedesktop/Hal/devices/volume_part2_size_1024
  Unique ID: 2pkM.SE1wIdpsiiC
  Parent ID: 3OOL.6s+eBf6t9X6
  SysFS ID: /class/block/sda/sda2
  Hardware Class: partition
  Model: "Partition"
  Device File: /dev/sda2
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #42 (Disk)

45: None 00.0: 11300 Partition
  [Created at block.412]
  UDI: /org/freedesktop/Hal/devices/volume_uuid_3ec16031_4690_44e5_a592_b64fad5511a5
  Unique ID: QLVZ.SE1wIdpsiiC
  Parent ID: 3OOL.6s+eBf6t9X6
  SysFS ID: /class/block/sda/sda5
  Hardware Class: partition
  Model: "Partition"
  Device File: /dev/sda5
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #42 (Disk)

46: USB 00.0: 10503 USB Mouse
  [Created at usb.122]
  UDI: /org/freedesktop/Hal/devices/usb_device_4d9_499_noserial_if0
  Unique ID: KRJj.EG8AbnisHi9
  Parent ID: uIhY.gkSaZmjGyhD
  SysFS ID: /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0
  SysFS BusID: 3-1:1.0
  Hardware Class: mouse
  Model: "Holtek USB Mouse"
  Hotplug: USB
  Vendor: usb 0x04d9 "Holtek Semiconductor, Inc."
  Device: usb 0x0499
  Revision: "2.90"
  Compatible to: int 0x0210 0x0013
  Driver: "usbhid"
  Driver Modules: "usbhid"
  Device File: /dev/input/mice (/dev/input/mouse2)
  Device Files: /dev/input/mice, /dev/input/mouse2, /dev/input/event9
  Device Number: char 13:63 (char 13:34)
  Speed: 1.5 Mbps
  Module Alias: "usb:v04D9p0499d0290dc00dsc00dp00ic03isc01ip02"
  Driver Info #0:
    Buttons: 3
    Wheels: 1
    XFree86 Protocol: explorerps/2
    GPM Protocol: exps2
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #48 (Hub)

47: USB 00.0: 10a00 Hub
  [Created at usb.122]
  UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2_if0
  Unique ID: zPk0.RTX9xWW_uz4
  Parent ID: mvRC.RH67kQEiJJ2
  SysFS ID: /devices/pci0000:00/0000:00:1d.2/usb4/4-0:1.0
  SysFS BusID: 4-0:1.0
  Hardware Class: hub
  Model: "Linux 2.6.28-16-generic uhci_hcd UHCI Host Controller"
  Hotplug: USB
  Vendor: usb 0x1d6b "Linux 2.6.28-16-generic uhci_hcd"
  Device: usb 0x0001 "UHCI Host Controller"
  Revision: "2.06"
  Serial ID: "0000:00:1d.2"
  Driver: "hub"
  Driver Modules: "usbcore"
  Speed: 12 Mbps
  Module Alias: "usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #21 (USB Controller)

48: USB 00.0: 10a00 Hub
  [Created at usb.122]
  UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1_if0
  Unique ID: uIhY.gkSaZmjGyhD
  Parent ID: vayM.u1HtHjtak91
  SysFS ID: /devices/pci0000:00/0000:00:1d.1/usb3/3-0:1.0
  SysFS BusID: 3-0:1.0
  Hardware Class: hub
  Model: "Linux 2.6.28-16-generic uhci_hcd UHCI Host Controller"
  Hotplug: USB
  Vendor: usb 0x1d6b "Linux 2.6.28-16-generic uhci_hcd"
  Device: usb 0x0001 "UHCI Host Controller"
  Revision: "2.06"
  Serial ID: "0000:00:1d.1"
  Driver: "hub"
  Driver Modules: "usbcore"
  Speed: 12 Mbps
  Module Alias: "usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #22 (USB Controller)

49: USB 00.0: 10a00 Hub
  [Created at usb.122]
  UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0_if0
  Unique ID: pBe4.v+N+B0xY+P6
  Parent ID: 1GTX.sCONKaeAhO0
  SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb2/2-0:1.0
  SysFS BusID: 2-0:1.0
  Hardware Class: hub
  Model: "Linux 2.6.28-16-generic uhci_hcd UHCI Host Controller"
  Hotplug: USB
  Vendor: usb 0x1d6b "Linux 2.6.28-16-generic uhci_hcd"
  Device: usb 0x0001 "UHCI Host Controller"
  Revision: "2.06"
  Serial ID: "0000:00:1d.0"
  Driver: "hub"
  Driver Modules: "usbcore"
  Speed: 12 Mbps
  Module Alias: "usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #23 (USB Controller)

50: USB 00.0: 10a00 Hub
  [Created at usb.122]
  UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7_if0
  Unique ID: k4bc.9T1GDCLyFd9
  Parent ID: 5YuN.1nMouvQh+R9
  SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb1/1-0:1.0
  SysFS BusID: 1-0:1.0
  Hardware Class: hub
  Model: "Linux 2.6.28-16-generic ehci_hcd EHCI Host Controller"
  Hotplug: USB
  Vendor: usb 0x1d6b "Linux 2.6.28-16-generic ehci_hcd"
  Device: usb 0x0002 "EHCI Host Controller"
  Revision: "2.06"
  Serial ID: "0000:00:1d.7"
  Driver: "hub"
  Driver Modules: "usbcore"
  Speed: 480 Mbps
  Module Alias: "usb:v1D6Bp0002d0206dc09dsc00dp00ic09isc00ip00"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #20 (USB Controller)

51: ADB 00.0: 10502 Bus Mouse
  [Created at input.183]
  UDI: /org/freedesktop/Hal/devices/computer_logicaldev_input_3
  Unique ID: kZYT.VdKNesd9pT6
  Hardware Class: mouse
  Model: "Macintosh mouse button emulation"
  Vendor: 0x0001
  Device: 0x0001 "Macintosh mouse button emulation"
  Compatible to: int 0x0210 0x0003
  Device File: /dev/input/mice (/dev/input/mouse0)
  Device Files: /dev/input/mice, /dev/input/mouse0, /dev/input/event4
  Device Number: char 13:63 (char 13:32)
  Driver Info #0:
    Buttons: 3
    Wheels: 0
    XFree86 Protocol: explorerps/2
    GPM Protocol: exps2
  Config Status: cfg=new, avail=yes, need=no, active=unknown

52: PS/2 00.0: 10800 Keyboard
  [Created at input.161]
  UDI: /org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input
  Unique ID: 3FDI.+49ps10DtUF
  Hardware Class: keyboard
  Model: "AT Translated Set 2 keyboard"
  Vendor: 0x0001
  Device: 0x0001 "AT Translated Set 2 keyboard"
  Compatible to: int 0x0211 0x0001
  Device File: /dev/input/event5
  Device Number: char 13:69
  Driver Info #0:
    XkbRules: xfree86
    XkbModel: pc104
  Config Status: cfg=new, avail=yes, need=no, active=unknown

53: PS/2 00.0: 10500 PS/2 Mouse
  [Created at input.183]
  UDI: /org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input
  Unique ID: AH6Q.aaw02jN0uv2
  Hardware Class: mouse
  Model: "SynPS/2 Synaptics TouchPad"
  Vendor: 0x0002
  Device: 0x0007 "SynPS/2 Synaptics TouchPad"
  Compatible to: int 0x0210 0x0003
  Device File: /dev/input/mice (/dev/input/mouse1)
  Device Files: /dev/input/mice, /dev/input/mouse1, /dev/input/event8
  Device Number: char 13:63 (char 13:33)
  Driver Info #0:
    Buttons: 3
    Wheels: 0
    XFree86 Protocol: explorerps/2
    GPM Protocol: exps2
  Config Status: cfg=new, avail=yes, need=no, active=unknown

54: None 00.0: 10103 CPU
  [Created at cpu.304]
  Unique ID: rdCR.j8NaKXDZtZ6
  Hardware Class: cpu
  Arch: Intel
  Vendor: "GenuineIntel"
  Model: 15.3.4 "Mobile Intel(R) Pentium(R) 4 CPU 2.80GHz"
  Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,constant_tsc,pebs,bts,pni,dtes64,monitor,ds_cpl,est,tm2,cid,xtpr
  Clock: 2790 MHz
  BogoMips: 5581.72
  Cache: 1024 kb
  Units/Processor: 2
  Config Status: cfg=new, avail=yes, need=no, active=unknown

55: None 01.0: 10103 CPU
  [Created at cpu.304]
  Unique ID: wkFv.j8NaKXDZtZ6
  Hardware Class: cpu
  Arch: Intel
  Vendor: "GenuineIntel"
  Model: 15.3.4 "Mobile Intel(R) Pentium(R) 4 CPU 2.80GHz"
  Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,constant_tsc,pebs,bts,pni,dtes64,monitor,ds_cpl,est,tm2,cid,xtpr
  Clock: 2790 MHz
  BogoMips: 5581.80
  Cache: 1024 kb
  Units/Processor: 2
  Config Status: cfg=new, avail=yes, need=no, active=unknown

56: None 00.0: 10701 Ethernet
  [Created at net.124]
  Unique ID: fLK9.ndpeucax6V1
  SysFS ID: /class/net/pan0
  Hardware Class: network interface
  Model: "Ethernet network interface"
  Driver: "bridge"
  Device File: pan0
  HW Address: 0e:f9:c4:90:f2:ee
  Link detected: yes
  Config Status: cfg=new, avail=yes, need=no, active=unknown

57: None 00.0: 10701 Ethernet
  [Created at net.124]
  Unique ID: j2Yp.ndpeucax6V1
  SysFS ID: /class/net/virbr0
  Hardware Class: network interface
  Model: "Ethernet network interface"
  Driver: "bridge"
  Device File: virbr0
  HW Address: c2:15:8b:5e:4a:a4
  Link detected: yes
  Config Status: cfg=new, avail=yes, need=no, active=unknown

58: None 00.0: 1070a WLAN
  [Created at net.124]
  Unique ID: AYEt.QXn1l67RSa1
  Parent ID: y9sn.onk47P9RYb5
  SysFS ID: /class/net/wlan0
  SysFS Device Link: /devices/pci0000:00/0000:00:1e.0/0000:01:09.0/ssb0:0
  Hardware Class: network interface
  Model: "WLAN network interface"
  Driver: "b43"
  Driver Modules: "b43"
  Device File: wlan0
  HW Address: 00:90:4b:8b:6c:ba
  Link detected: yes
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #12 (WLAN controller)

59: None 00.0: 10780 Network Interface
  [Created at net.124]
  Unique ID: agy+.GSopYcFr9cF
  SysFS ID: /class/net/wmaster0
  SysFS Device Link: /devices/pci0000:00/0000:00:1e.0/0000:01:09.0/ssb0:0
  Hardware Class: network interface
  Model: "Network Interface"
  Driver: "b43"
  Driver Modules: "b43"
  Device File: wmaster0
  HW Address: 00:90:4b:8b:6c:ba
  Link detected: yes
  Config Status: cfg=new, avail=yes, need=no, active=unknown

60: None 00.0: 10701 Ethernet
  [Created at net.124]
  Unique ID: usDW.ndpeucax6V1
  Parent ID: rBUF.IhC9eApWEv2
  SysFS ID: /class/net/eth0
  SysFS Device Link: /devices/pci0000:00/0000:00:1e.0/0000:01:06.0/ssb1:0
  Hardware Class: network interface
  Model: "Ethernet network interface"
  Driver: "b44"
  Driver Modules: "ssb", "b44"
  Device File: eth0
  HW Address: 00:03:25:12:02:e5
  Link detected: no
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #13 (Ethernet controller)

61: None 00.0: 10700 Loopback
  [Created at net.124]
  Unique ID: ZsBS.GQNx7L4uPNA
  SysFS ID: /class/net/lo
  Hardware Class: network interface
  Model: "Loopback network interface"
  Device File: lo
  Link detected: yes
  Config Status: cfg=new, avail=yes, need=no, active=unknown