Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] BIOS EBDA/lowmem at: 0009e000/0009e000
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 2.6.28-6-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-3ubuntu1) ) #17-Ubuntu SMP Fri Jan 30 15:34:36 UTC 2009 (Ubuntu 2.6.28-6.17-generic)
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] Intel GenuineIntel
- [ 0.000000] AMD AuthenticAMD
- [ 0.000000] NSC Geode by NSC
- [ 0.000000] Cyrix CyrixInstead
- [ 0.000000] Centaur CentaurHauls
- [ 0.000000] Transmeta GenuineTMx86
- [ 0.000000] Transmeta TransmetaCPU
- [ 0.000000] UMC UMC UMC UMC
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
- [ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
- [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
- [ 0.000000] BIOS-e820: 0000000000100000 - 00000000b7b6c000 (usable)
- [ 0.000000] BIOS-e820: 00000000b7b6c000 - 00000000b7bbf000 (reserved)
- [ 0.000000] BIOS-e820: 00000000b7bbf000 - 00000000b7c86000 (usable)
- [ 0.000000] BIOS-e820: 00000000b7c86000 - 00000000b7cbf000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 00000000b7cbf000 - 00000000b7cee000 (usable)
- [ 0.000000] BIOS-e820: 00000000b7cee000 - 00000000b7cff000 (ACPI data)
- [ 0.000000] BIOS-e820: 00000000b7cff000 - 00000000b7d00000 (usable)
- [ 0.000000] BIOS-e820: 00000000b7d00000 - 00000000c0000000 (reserved)
- [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
- [ 0.000000] DMI 2.4 present.
- [ 0.000000] last_pfn = 0xb7d00 max_arch_pfn = 0x100000
- [ 0.000000] Scanning 2 areas for low memory corruption
- [ 0.000000] modified physical RAM map:
- [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
- [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
- [ 0.000000] modified: 0000000000006000 - 0000000000007000 (usable)
- [ 0.000000] modified: 0000000000007000 - 0000000000010000 (reserved)
- [ 0.000000] modified: 0000000000010000 - 0000000000091000 (usable)
- [ 0.000000] modified: 000000000009e000 - 00000000000a0000 (reserved)
- [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
- [ 0.000000] modified: 0000000000100000 - 00000000b7b6c000 (usable)
- [ 0.000000] modified: 00000000b7b6c000 - 00000000b7bbf000 (reserved)
- [ 0.000000] modified: 00000000b7bbf000 - 00000000b7c86000 (usable)
- [ 0.000000] modified: 00000000b7c86000 - 00000000b7cbf000 (ACPI NVS)
- [ 0.000000] modified: 00000000b7cbf000 - 00000000b7cee000 (usable)
- [ 0.000000] modified: 00000000b7cee000 - 00000000b7cff000 (ACPI data)
- [ 0.000000] modified: 00000000b7cff000 - 00000000b7d00000 (usable)
- [ 0.000000] modified: 00000000b7d00000 - 00000000c0000000 (reserved)
- [ 0.000000] modified: 00000000f8000000 - 00000000fc000000 (reserved)
- [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved)
- [ 0.000000] modified: 00000000fed10000 - 00000000fed14000 (reserved)
- [ 0.000000] modified: 00000000fed18000 - 00000000fed1a000 (reserved)
- [ 0.000000] modified: 00000000fed1c000 - 00000000fed20000 (reserved)
- [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
- [ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved)
- [ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
- [ 0.000000] RAMDISK: 7f885000 - 7ffff0e8
- [ 0.000000] Allocated new RAMDISK: 00857000 - 00fd10e8
- [ 0.000000] Move RAMDISK from 000000007f885000 - 000000007ffff0e7 to 00857000 - 00fd10e7
- [ 0.000000] ACPI: RSDP 000FE020, 0024 (r2 TOSINV)
- [ 0.000000] ACPI: XSDT B7CFE120, 0064 (r1 TOSINV TOSINV00 1 1000013)
- [ 0.000000] ACPI: FACP B7CFD000, 00F4 (r4 TOSINV TOSINV00 1 MSFT 1000013)
- [ 0.000000] ACPI: DSDT B7CF1000, 763F (r1 TOSINV TOSINV00 1 MSFT 1000013)
- [ 0.000000] ACPI: FACS B7C93000, 0040
- [ 0.000000] ACPI: HPET B7CFC000, 0038 (r1 TOSINV TOSINV00 1 MSFT 1000013)
- [ 0.000000] ACPI: APIC B7CFB000, 006C (r2 TOSINV TOSINV00 1 MSFT 1000013)
- [ 0.000000] ACPI: MCFG B7CFA000, 003C (r1 TOSINV TOSINV00 1 MSFT 1000013)
- [ 0.000000] ACPI: ASF! B7CF9000, 00A5 (r32 TOSINV TOSINV00 1 MSFT 1000013)
- [ 0.000000] ACPI: SLIC B7CF0000, 0176 (r1 TOSINV TOSINV00 1 MSFT 1000013)
- [ 0.000000] ACPI: BOOT B7CEF000, 0028 (r1 TOSINV TOSINV00 1 MSFT 1000013)
- [ 0.000000] ACPI: SSDT B7CEE000, 0655 (r1 PmRef CpuPm 3000 INTL 20051117)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] 2057MB HIGHMEM available.
- [ 0.000000] 883MB LOWMEM available.
- [ 0.000000] mapped low ram: 0 - 373fe000
- [ 0.000000] low ram: 00000000 - 373fe000
- [ 0.000000] bootmap 00012000 - 00018e80
- [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
- [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
- [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
- [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
- [ 0.000000] #3 [0000100000 - 000085252c] TEXT DATA BSS ==> [0000100000 - 000085252c]
- [ 0.000000] #4 [0000853000 - 0000857000] INIT_PG_TABLE ==> [0000853000 - 0000857000]
- [ 0.000000] #5 [000009e000 - 0000100000] BIOS reserved ==> [000009e000 - 0000100000]
- [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
- [ 0.000000] #7 [0000857000 - 0000fd10e8] NEW RAMDISK ==> [0000857000 - 0000fd10e8]
- [ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0x00000000 -> 0x00001000
- [ 0.000000] Normal 0x00001000 -> 0x000373fe
- [ 0.000000] HighMem 0x000373fe -> 0x000b7d00
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[7] active PFN ranges
- [ 0.000000] 0: 0x00000000 -> 0x00000002
- [ 0.000000] 0: 0x00000006 -> 0x00000007
- [ 0.000000] 0: 0x00000010 -> 0x00000091
- [ 0.000000] 0: 0x00000100 -> 0x000b7b6c
- [ 0.000000] 0: 0x000b7bbf -> 0x000b7c86
- [ 0.000000] 0: 0x000b7cbf -> 0x000b7cee
- [ 0.000000] 0: 0x000b7cff -> 0x000b7d00
- [ 0.000000] On node 0 totalpages: 752615
- [ 0.000000] free_area_init_node: node 0, pgdat c06aa200, node_mem_map c1000000
- [ 0.000000] DMA zone: 32 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 3940 pages, LIFO batch:0
- [ 0.000000] Normal zone: 1736 pages used for memmap
- [ 0.000000] Normal zone: 220470 pages, LIFO batch:31
- [ 0.000000] HighMem zone: 4115 pages used for memmap
- [ 0.000000] HighMem zone: 522322 pages, LIFO batch:31
- [ 0.000000] Movable zone: 0 pages used for memmap
- [ 0.000000] ACPI: PM-Timer IO Port: 0x408
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
- [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
- [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
- [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
- [ 0.000000] PM: Registered nosave memory: 0000000000007000 - 0000000000010000
- [ 0.000000] PM: Registered nosave memory: 0000000000091000 - 000000000009e000
- [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
- [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
- [ 0.000000] Allocating PCI resources starting at c4000000 (gap: c0000000:38000000)
- [ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data
- [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 746732
- [ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash -- debian-installer/language=hu console-setup/layoutcode?=hu
- [ 0.000000] Enabling fast FPU save and restore... done.
- [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
- [ 0.000000] Initializing CPU#0
- [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
- [ 0.000000] Fast TSC calibration using PIT
- [ 0.000000] Detected 1995.475 MHz processor.
- [ 0.004000] Console: colour VGA+ 80x25
- [ 0.004000] console [tty0] enabled
- [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.004000] allocated 15057920 bytes of page_cgroup
- [ 0.004000] please try cgroup_disable=memory option if you don't want
- [ 0.004000] Scanning for low memory corruption every 60 seconds
- [ 0.004000] Memory: 2955104k/3011584k available (4002k kernel code, 54508k reserved, 2177k data, 516k init, 2105748k highmem)
- [ 0.004000] virtual kernel memory layout:
- [ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
- [ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
- [ 0.004000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
- [ 0.004000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
- [ 0.004000] .init : 0xc0711000 - 0xc0792000 ( 516 kB)
- [ 0.004000] .data : 0xc04e898f - 0xc0708e60 (2177 kB)
- [ 0.004000] .text : 0xc0100000 - 0xc04e898f (4002 kB)
- [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
- [ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.004000] hpet clockevent registered
- [ 0.004000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
- [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.95 BogoMIPS (lpj=7981900)
- [ 0.004000] Security Framework initialized
- [ 0.004000] SELinux: Disabled at boot.
- [ 0.004000] AppArmor: AppArmor initialized
- [ 0.004000] Mount-cache hash table entries: 512
- [ 0.004000] Initializing cgroup subsys ns
- [ 0.004000] Initializing cgroup subsys cpuacct
- [ 0.004000] Initializing cgroup subsys memory
- [ 0.004000] Initializing cgroup subsys freezer
- [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
- [ 0.004000] CPU: L2 cache: 2048K
- [ 0.004000] CPU: Physical Processor ID: 0
- [ 0.004000] CPU: Processor Core ID: 0
- [ 0.004000] using mwait in idle threads.
- [ 0.004000] Checking 'hlt' instruction... OK.
- [ 0.018211] ACPI: Core revision 20080926
- [ 0.020813] ACPI: Checking initramfs for custom DSDT
- [ 0.344433] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.385771] CPU0: Intel(R) Core(TM)2 Duo CPU T5800 @ 2.00GHz stepping 0d
- [ 0.388001] Booting processor 1 APIC 0x1 ip 0x6000
- [ 0.004000] Initializing CPU#1
- [ 0.004000] Calibrating delay using timer specific routine.. 3990.45 BogoMIPS (lpj=7980906)
- [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
- [ 0.004000] CPU: L2 cache: 2048K
- [ 0.004000] CPU: Physical Processor ID: 0
- [ 0.004000] CPU: Processor Core ID: 1
- [ 0.472473] CPU1: Intel(R) Core(TM)2 Duo CPU T5800 @ 2.00GHz stepping 0d
- [ 0.472488] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
- [ 0.476035] Brought up 2 CPUs
- [ 0.476038] Total of 2 processors activated (7981.40 BogoMIPS).
- [ 0.476091] CPU0 attaching sched-domain:
- [ 0.476094] domain 0: span 0-1 level MC
- [ 0.476096] groups: 0 1
- [ 0.476103] CPU1 attaching sched-domain:
- [ 0.476105] domain 0: span 0-1 level MC
- [ 0.476107] groups: 1 0
- [ 0.476171] net_namespace: 776 bytes
- [ 0.476171] Booting paravirtualized kernel on bare hardware
- [ 0.476274] Time: 19:54:59 Date: 02/16/09
- [ 0.476274] regulator: core version 0.5
- [ 0.476274] NET: Registered protocol family 16
- [ 0.476274] EISA bus registered
- [ 0.476274] ACPI: bus type pci registered
- [ 0.476274] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
- [ 0.476274] PCI: MCFG area at f8000000 reserved in E820
- [ 0.476274] PCI: Using MMCONFIG for extended config space
- [ 0.476274] PCI: Using configuration type 1 for base access
- [ 0.481523] ACPI: EC: Look up EC in DSDT
- [ 0.486512] ACPI: BIOS _OSI(Linux) query ignored
- [ 0.484016] ACPI: EC: non-query interrupt received, switching to interrupt mode
- [ 0.492031] ACPI: EC: GPE storm detected, transactions will use polling mode
- [ 0.992006] ACPI: EC: missing confirmations, switch off interrupt mode.
- [ 1.112575] ACPI: Interpreter enabled
- [ 1.112578] ACPI: (supports S0 S3 S4 S5)
- [ 1.112605] ACPI: Using IOAPIC for interrupt routing
- [ 1.124353] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
- [ 1.124355] ACPI: EC: driver started in poll mode
- [ 1.124370] ACPI: No dock devices found.
- [ 1.124370] ACPI: PCI Root Bridge [PCI0] (0000:00)
- [ 1.124370] pci 0000:00:02.0: reg 10 64bit mmio: [0xd0000000-0xd03fffff]
- [ 1.124370] pci 0000:00:02.0: reg 18 64bit mmio: [0xc0000000-0xcfffffff]
- [ 1.124370] pci 0000:00:02.0: reg 20 io port: [0x5110-0x5117]
- [ 1.124370] pci 0000:00:02.1: reg 10 64bit mmio: [0xd3500000-0xd35fffff]
- [ 1.124370] pci 0000:00:1a.0: reg 20 io port: [0x50e0-0x50ff]
- [ 1.124380] pci 0000:00:1a.1: reg 20 io port: [0x50c0-0x50df]
- [ 1.124481] pci 0000:00:1a.7: reg 10 32bit mmio: [0xd6705c00-0xd6705fff]
- [ 1.124532] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
- [ 1.124538] pci 0000:00:1a.7: PME# disabled
- [ 1.124597] pci 0000:00:1b.0: reg 10 64bit mmio: [0xd6700000-0xd6703fff]
- [ 1.124639] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- [ 1.124644] pci 0000:00:1b.0: PME# disabled
- [ 1.124711] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- [ 1.124715] pci 0000:00:1c.0: PME# disabled
- [ 1.124786] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
- [ 1.124791] pci 0000:00:1c.1: PME# disabled
- [ 1.124861] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
- [ 1.124866] pci 0000:00:1c.4: PME# disabled
- [ 1.124963] pci 0000:00:1d.0: reg 20 io port: [0x50a0-0x50bf]
- [ 1.125073] pci 0000:00:1d.1: reg 20 io port: [0x5080-0x509f]
- [ 1.125190] pci 0000:00:1d.2: reg 20 io port: [0x5060-0x507f]
- [ 1.125302] pci 0000:00:1d.3: reg 20 io port: [0x5040-0x505f]
- [ 1.125398] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd6705800-0xd6705bff]
- [ 1.125449] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
- [ 1.125454] pci 0000:00:1d.7: PME# disabled
- [ 1.125670] pci 0000:00:1f.2: reg 10 io port: [0x5108-0x510f]
- [ 1.125678] pci 0000:00:1f.2: reg 14 io port: [0x511c-0x511f]
- [ 1.125686] pci 0000:00:1f.2: reg 18 io port: [0x5100-0x5107]
- [ 1.125694] pci 0000:00:1f.2: reg 1c io port: [0x5118-0x511b]
- [ 1.125702] pci 0000:00:1f.2: reg 20 io port: [0x5020-0x503f]
- [ 1.125710] pci 0000:00:1f.2: reg 24 32bit mmio: [0xd6705000-0xd67057ff]
- [ 1.125730] pci 0000:00:1f.2: PME# supported from D3hot
- [ 1.125734] pci 0000:00:1f.2: PME# disabled
- [ 1.125775] pci 0000:00:1f.3: reg 10 64bit mmio: [0xd6706000-0xd67060ff]
- [ 1.125796] pci 0000:00:1f.3: reg 20 io port: [0x5000-0x501f]
- [ 1.125984] pci 0000:02:00.0: reg 10 io port: [0x3000-0x30ff]
- [ 1.126059] pci 0000:02:00.0: reg 18 64bit mmio: [0xd0410000-0xd0410fff]
- [ 1.126106] pci 0000:02:00.0: reg 20 64bit mmio: [0xd0400000-0xd040ffff]
- [ 1.126166] pci 0000:02:00.0: unsupported PM cap regs version (7)
- [ 1.126338] pci 0000:00:1c.0: bridge io port: [0x3000-0x4fff]
- [ 1.126343] pci 0000:00:1c.0: bridge 32bit mmio: [0xd5700000-0xd66fffff]
- [ 1.126351] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xd0400000-0xd14fffff]
- [ 1.126437] pci 0000:03:00.0: reg 10 64bit mmio: [0xd4600000-0xd4601fff]
- [ 1.126507] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
- [ 1.126514] pci 0000:03:00.0: PME# disabled
- [ 1.126591] pci 0000:00:1c.1: bridge io port: [0x2000-0x2fff]
- [ 1.126596] pci 0000:00:1c.1: bridge 32bit mmio: [0xd4600000-0xd56fffff]
- [ 1.126604] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xd1500000-0xd24fffff]
- [ 1.126664] pci 0000:00:1c.4: bridge io port: [0x1000-0x1fff]
- [ 1.126669] pci 0000:00:1c.4: bridge 32bit mmio: [0xd3600000-0xd45fffff]
- [ 1.126677] pci 0000:00:1c.4: bridge 64bit mmio pref: [0xd2500000-0xd34fffff]
- [ 1.126737] pci 0000:00:1e.0: transparent bridge
- [ 1.126778] bus 00 -> node 0
- [ 1.126790] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 1.128267] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
- [ 1.128452] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
- [ 1.128643] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
- [ 1.128841] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT]
- [ 1.132206] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12)
- [ 1.132279] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
- [ 1.132442] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
- [ 1.132604] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
- [ 1.132765] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
- [ 1.132927] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
- [ 1.133087] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
- [ 1.133248] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
- [ 1.133330] ACPI: Power Resource [FN00] (on)
- [ 1.133330] ACPI: WMI: Mapper loaded
- [ 1.133330] SCSI subsystem initialized
- [ 1.133330] libata version 3.00 loaded.
- [ 1.133330] usbcore: registered new interface driver usbfs
- [ 1.133330] usbcore: registered new interface driver hub
- [ 1.133330] usbcore: registered new device driver usb
- [ 1.133330] PCI: Using ACPI for IRQ routing
- [ 1.140034] Bluetooth: Core ver 2.13
- [ 1.140047] NET: Registered protocol family 31
- [ 1.140047] Bluetooth: HCI device and connection manager initialized
- [ 1.140047] Bluetooth: HCI socket layer initialized
- [ 1.140047] NET: Registered protocol family 8
- [ 1.140047] NET: Registered protocol family 20
- [ 1.140047] NetLabel: Initializing
- [ 1.140047] NetLabel: domain hash size = 128
- [ 1.140047] NetLabel: protocols = UNLABELED CIPSOv4
- [ 1.140047] NetLabel: unlabeled traffic allowed by default
- [ 1.140047] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
- [ 1.140047] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
- [ 1.144058] AppArmor: AppArmor Filesystem Enabled
- [ 1.148009] Switched to high resolution mode on CPU 0
- [ 1.148525] Switched to high resolution mode on CPU 1
- [ 1.152009] pnp: PnP ACPI init
- [ 1.152018] ACPI: bus type pnp registered
- [ 1.153738] pnp 00:01: io resource (0x164e-0x164f) overlaps 0000:00:1c.4 BAR 7 (0x1000-0x1fff), disabling
- [ 1.154721] pnp: PnP ACPI: found 8 devices
- [ 1.154723] ACPI: ACPI bus type pnp unregistered
- [ 1.154726] PnPBIOS: Disabled by ACPI PNP
- [ 1.154736] system 00:01: ioport range 0x800-0x80f has been reserved
- [ 1.154738] system 00:01: ioport range 0x810-0x817 has been reserved
- [ 1.154741] system 00:01: ioport range 0x820-0x823 has been reserved
- [ 1.154743] system 00:01: ioport range 0x400-0x47f has been reserved
- [ 1.154746] system 00:01: ioport range 0x500-0x57f has been reserved
- [ 1.154748] system 00:01: ioport range 0x580-0x5ff has been reserved
- [ 1.154751] system 00:01: ioport range 0x600-0x627 has been reserved
- [ 1.154754] system 00:01: iomem range 0xf8000000-0xfbffffff has been reserved
- [ 1.154757] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
- [ 1.154760] system 00:01: iomem range 0xfed10000-0xfed13fff has been reserved
- [ 1.154762] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
- [ 1.154765] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
- [ 1.154768] system 00:01: iomem range 0xfec00000-0xfec00fff has been reserved
- [ 1.154771] system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved
- [ 1.154773] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
- [ 1.154776] system 00:01: iomem range 0xff800000-0xffffffff could not be reserved
- [ 1.189772] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
- [ 1.189776] pci 0000:00:1c.0: IO window: 0x3000-0x4fff
- [ 1.189783] pci 0000:00:1c.0: MEM window: 0xd5700000-0xd66fffff
- [ 1.189788] pci 0000:00:1c.0: PREFETCH window: 0x000000d0400000-0x000000d14fffff
- [ 1.189797] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
- [ 1.189800] pci 0000:00:1c.1: IO window: 0x2000-0x2fff
- [ 1.189806] pci 0000:00:1c.1: MEM window: 0xd4600000-0xd56fffff
- [ 1.189811] pci 0000:00:1c.1: PREFETCH window: 0x000000d1500000-0x000000d24fffff
- [ 1.189819] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:06
- [ 1.189822] pci 0000:00:1c.4: IO window: 0x1000-0x1fff
- [ 1.189829] pci 0000:00:1c.4: MEM window: 0xd3600000-0xd45fffff
- [ 1.189834] pci 0000:00:1c.4: PREFETCH window: 0x000000d2500000-0x000000d34fffff
- [ 1.189842] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
- [ 1.189844] pci 0000:00:1e.0: IO window: disabled
- [ 1.189849] pci 0000:00:1e.0: MEM window: disabled
- [ 1.189853] pci 0000:00:1e.0: PREFETCH window: disabled
- [ 1.189871] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- [ 1.189876] pci 0000:00:1c.0: setting latency timer to 64
- [ 1.189886] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
- [ 1.189891] pci 0000:00:1c.1: setting latency timer to 64
- [ 1.189899] pci 0000:00:1c.4: enabling device (0000 -> 0003)
- [ 1.189903] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- [ 1.189909] pci 0000:00:1c.4: setting latency timer to 64
- [ 1.189917] pci 0000:00:1e.0: setting latency timer to 64
- [ 1.189921] bus: 00 index 0 io port: [0x00-0xffff]
- [ 1.189923] bus: 00 index 1 mmio: [0x000000-0xffffffff]
- [ 1.189926] bus: 02 index 0 io port: [0x3000-0x4fff]
- [ 1.189928] bus: 02 index 1 mmio: [0xd5700000-0xd66fffff]
- [ 1.189930] bus: 02 index 2 mmio: [0xd0400000-0xd14fffff]
- [ 1.189932] bus: 02 index 3 mmio: [0x0-0x0]
- [ 1.189934] bus: 03 index 0 io port: [0x2000-0x2fff]
- [ 1.189936] bus: 03 index 1 mmio: [0xd4600000-0xd56fffff]
- [ 1.189938] bus: 03 index 2 mmio: [0xd1500000-0xd24fffff]
- [ 1.189940] bus: 03 index 3 mmio: [0x0-0x0]
- [ 1.189942] bus: 06 index 0 io port: [0x1000-0x1fff]
- [ 1.189944] bus: 06 index 1 mmio: [0xd3600000-0xd45fffff]
- [ 1.189946] bus: 06 index 2 mmio: [0xd2500000-0xd34fffff]
- [ 1.189948] bus: 06 index 3 mmio: [0x0-0x0]
- [ 1.189949] bus: 04 index 0 mmio: [0x0-0x0]
- [ 1.189951] bus: 04 index 1 mmio: [0x0-0x0]
- [ 1.189953] bus: 04 index 2 mmio: [0x0-0x0]
- [ 1.189955] bus: 04 index 3 io port: [0x00-0xffff]
- [ 1.189957] bus: 04 index 4 mmio: [0x000000-0xffffffff]
- [ 1.189964] NET: Registered protocol family 2
- [ 1.204052] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 1.204283] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 1.204619] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- [ 1.204805] TCP: Hash tables configured (established 131072 bind 65536)
- [ 1.204807] TCP reno registered
- [ 1.212076] NET: Registered protocol family 1
- [ 1.212193] checking if image is initramfs... it is
- [ 1.863617] Freeing initrd memory: 7656k freed
- [ 1.863780] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
- [ 1.863782] Simple Boot Flag at 0x44 set to 0x1
- [ 1.864674] audit: initializing netlink socket (disabled)
- [ 1.864695] type=2000 audit(1234814099.864:1): initialized
- [ 1.872734] highmem bounce pool size: 64 pages
- [ 1.872738] HugeTLB registered 4 MB page size, pre-allocated 0 pages
- [ 1.874946] VFS: Disk quotas dquot_6.5.1
- [ 1.875026] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 1.875914] msgmni has been set to 1675
- [ 1.876091] alg: No test for stdrng (krng)
- [ 1.876101] io scheduler noop registered
- [ 1.876103] io scheduler anticipatory registered
- [ 1.876105] io scheduler deadline registered
- [ 1.876117] io scheduler cfq registered (default)
- [ 1.876129] pci 0000:00:02.0: Boot video device
- [ 9.876008] pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
- [ 17.876008] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
- [ 17.879254] pcieport-driver 0000:00:1c.0: setting latency timer to 64
- [ 17.879307] pcieport-driver 0000:00:1c.0: found MSI capability
- [ 17.879345] pcieport-driver 0000:00:1c.0: irq 2303 for MSI/MSI-X
- [ 17.879362] pci_express 0000:00:1c.0:pcie00: allocate port service
- [ 17.879400] pci_express 0000:00:1c.0:pcie02: allocate port service
- [ 17.879433] pci_express 0000:00:1c.0:pcie03: allocate port service
- [ 17.879534] pcieport-driver 0000:00:1c.1: setting latency timer to 64
- [ 17.879585] pcieport-driver 0000:00:1c.1: found MSI capability
- [ 17.879620] pcieport-driver 0000:00:1c.1: irq 2302 for MSI/MSI-X
- [ 17.879637] pci_express 0000:00:1c.1:pcie00: allocate port service
- [ 17.879672] pci_express 0000:00:1c.1:pcie02: allocate port service
- [ 17.879704] pci_express 0000:00:1c.1:pcie03: allocate port service
- [ 17.879806] pcieport-driver 0000:00:1c.4: setting latency timer to 64
- [ 17.879857] pcieport-driver 0000:00:1c.4: found MSI capability
- [ 17.879892] pcieport-driver 0000:00:1c.4: irq 2301 for MSI/MSI-X
- [ 17.879908] pci_express 0000:00:1c.4:pcie00: allocate port service
- [ 17.879941] pci_express 0000:00:1c.4:pcie02: allocate port service
- [ 17.879973] pci_express 0000:00:1c.4:pcie03: allocate port service
- [ 17.880134] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 17.880280] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
- [ 17.880509] ACPI: AC Adapter [ADP0] (on-line)
- [ 17.881708] ACPI: Battery Slot [BAT0] (battery present)
- [ 17.881873] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
- [ 17.881876] ACPI: Power Button (FF) [PWRF]
- [ 17.881944] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
- [ 17.881946] ACPI: Power Button (CM) [PWRB]
- [ 17.882013] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
- [ 17.883867] ACPI: Lid Switch [LID0]
- [ 17.884153] fan PNP0C0B:00: registered as cooling_device0
- [ 17.884159] ACPI: Fan [FAN] (on)
- [ 17.884959] ACPI: SSDT B7B77C18, 026B (r1 PmRef Cpu0Ist 3000 INTL 20051117)
- [ 17.885501] ACPI: SSDT B7B75598, 0537 (r1 PmRef Cpu0Cst 3001 INTL 20051117)
- [ 17.886093] Monitor-Mwait will be used to enter C-1 state
- [ 17.886097] Monitor-Mwait will be used to enter C-2 state
- [ 17.886138] ACPI: CPU0 (power states: C1[C1] C2[C2])
- [ 17.886180] processor ACPI_CPU:00: registered as cooling_device1
- [ 17.886184] ACPI: Processor [CPU0] (supports 8 throttling states)
- [ 17.886675] ACPI: SSDT B7B76E18, 01CF (r1 PmRef ApIst 3000 INTL 20051117)
- [ 17.887236] ACPI: SSDT B7B77F18, 008D (r1 PmRef ApCst 3000 INTL 20051117)
- [ 17.887947] ACPI: CPU1 (power states: C1[C1] C2[C2])
- [ 17.887991] processor ACPI_CPU:01: registered as cooling_device2
- [ 17.887994] ACPI: Processor [CPU1] (supports 8 throttling states)
- [ 17.891063] thermal LNXTHERM:01: registered as thermal_zone0
- [ 17.891333] ACPI: Transitioning device [FAN] to D3
- [ 17.891460] ACPI: Thermal Zone [THRM] (0 C)
- [ 17.891572] isapnp: Scanning for PnP cards...
- [ 18.245370] isapnp: No Plug & Play device found
- [ 18.252810] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
- [ 18.254709] brd: module loaded
- [ 18.255366] loop: module loaded
- [ 18.255545] Fixed MDIO Bus: probed
- [ 18.255550] PPP generic driver version 2.4.2
- [ 18.255670] input: Macintosh mouse button emulation as /devices/virtual/input/input3
- [ 18.255727] Driver 'sd' needs updating - please use bus_type methods
- [ 18.255759] Driver 'sr' needs updating - please use bus_type methods
- [ 18.255842] ahci 0000:00:1f.2: version 3.0
- [ 18.255858] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 18.255898] ahci 0000:00:1f.2: irq 2300 for MSI/MSI-X
- [ 18.255985] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
- [ 18.255988] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ems
- [ 18.255994] ahci 0000:00:1f.2: setting latency timer to 64
- [ 18.256262] scsi0 : ahci
- [ 18.256398] scsi1 : ahci
- [ 18.256496] scsi2 : ahci
- [ 18.256594] scsi3 : ahci
- [ 18.256692] scsi4 : ahci
- [ 18.256787] scsi5 : ahci
- [ 18.256944] ata1: SATA max UDMA/133 abar m2048@0xd6705000 port 0xd6705100 irq 2300
- [ 18.256948] ata2: SATA max UDMA/133 abar m2048@0xd6705000 port 0xd6705180 irq 2300
- [ 18.256950] ata3: DUMMY
- [ 18.256951] ata4: DUMMY
- [ 18.256954] ata5: SATA max UDMA/133 abar m2048@0xd6705000 port 0xd6705300 irq 2300
- [ 18.256957] ata6: SATA max UDMA/133 irq_stat 0x00000040, connection status changed irq 2300
- [ 18.740016] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 18.740863] ata1.00: ATA-8: Hitachi HTS543216L9SA00, FB2OC43C, max UDMA/133
- [ 18.740866] ata1.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32)
- [ 18.741926] ata1.00: configured for UDMA/133
- [ 19.076018] ata2: SATA link down (SStatus 0 SControl 300)
- [ 19.412016] ata5: SATA link down (SStatus 0 SControl 300)
- [ 20.316014] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 20.319800] ata6.00: ATAPI: HL-DT-ST DVDRAM GSA-T50N, RT04, max UDMA/133
- [ 20.324617] ata6.00: configured for UDMA/133
- [ 20.344109] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54321 FB2O PQ: 0 ANSI: 5
- [ 20.344272] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
- [ 20.344288] sd 0:0:0:0: [sda] Write Protect is off
- [ 20.344290] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 20.344314] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 20.344370] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
- [ 20.344384] sd 0:0:0:0: [sda] Write Protect is off
- [ 20.344386] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 20.344410] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 20.344413] sda: sda1 sda2 sda3
- [ 20.704863] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 20.704948] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 20.708248] scsi 5:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T50N RT04 PQ: 0 ANSI: 5
- [ 20.712045] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 20.712048] Uniform CD-ROM driver Revision: 3.20
- [ 20.712180] sr 5:0:0:0: Attached scsi CD-ROM sr0
- [ 20.712258] sr 5:0:0:0: Attached scsi generic sg1 type 5
- [ 20.713986] usbcore: registered new interface driver libusual
- [ 20.714060] usbcore: registered new interface driver usbserial
- [ 20.714091] USB Serial support registered for generic
- [ 20.714123] usbcore: registered new interface driver usbserial_generic
- [ 20.714125] usbserial: USB Serial Driver core
- [ 20.714211] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
- [ 20.744925] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 20.744930] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 20.745123] mice: PS/2 mouse device common for all mice
- [ 20.756206] rtc_cmos 00:03: RTC can wake from S4
- [ 20.756260] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
- [ 20.756293] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
- [ 20.756389] device-mapper: uevent: version 1.0.3
- [ 20.756501] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
- [ 20.756560] device-mapper: multipath: version 1.0.5 loaded
- [ 20.756563] device-mapper: multipath round-robin: version 1.0.0 loaded
- [ 20.756675] EISA: Probing bus 0 at eisa.0
- [ 20.756683] Cannot allocate resource for EISA slot 1
- [ 20.756685] Cannot allocate resource for EISA slot 2
- [ 20.756687] Cannot allocate resource for EISA slot 3
- [ 20.756689] Cannot allocate resource for EISA slot 4
- [ 20.756692] Cannot allocate resource for EISA slot 5
- [ 20.756706] EISA: Detected 0 cards.
- [ 20.756922] cpuidle: using governor ladder
- [ 20.757244] cpuidle: using governor menu
- [ 20.757808] TCP cubic registered
- [ 20.757934] Marking TSC unstable due to TSC halts in idle
- [ 20.757960] NET: Registered protocol family 10
- [ 20.758376] lo: Disabled Privacy Extensions
- [ 20.758699] NET: Registered protocol family 17
- [ 20.758748] Bluetooth: L2CAP ver 2.11
- [ 20.758750] Bluetooth: L2CAP socket layer initialized
- [ 20.758753] Bluetooth: SCO (Voice Link) ver 0.6
- [ 20.758755] Bluetooth: SCO socket layer initialized
- [ 20.758785] Bluetooth: RFCOMM socket layer initialized
- [ 20.758791] Bluetooth: RFCOMM TTY layer initialized
- [ 20.758792] Bluetooth: RFCOMM ver 1.10
- [ 20.758812] Using IPI No-Shortcut mode
- [ 20.758950] registered taskstats version 1
- [ 20.759067] Magic number: 13:84:951
- [ 20.759085] tty tty8: hash matches
- [ 20.759136] rtc_cmos 00:03: setting system clock to 2009-02-16 19:55:19 UTC (1234814119)
- [ 20.759139] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
- [ 20.759140] EDD information not available.
- [ 20.759403] Freeing unused kernel memory: 516k freed
- [ 20.759533] Write protecting the kernel text: 4004k
- [ 20.759584] Write protecting the kernel read-only data: 1504k
- [ 20.785295] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
- [ 20.896631] fuse init (API version 7.10)
- [ 20.964672] uhci_hcd: USB Universal Host Controller Interface driver
- [ 20.964725] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 20.964735] uhci_hcd 0000:00:1a.0: setting latency timer to 64
- [ 20.964739] uhci_hcd 0000:00:1a.0: UHCI Host Controller
- [ 20.964816] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
- [ 20.964857] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000050e0
- [ 20.964935] usb usb1: configuration #1 chosen from 1 choice
- [ 20.964961] hub 1-0:1.0: USB hub found
- [ 20.964968] hub 1-0:1.0: 2 ports detected
- [ 20.965068] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
- [ 20.965074] uhci_hcd 0000:00:1a.1: setting latency timer to 64
- [ 20.965077] uhci_hcd 0000:00:1a.1: UHCI Host Controller
- [ 20.965119] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
- [ 20.965153] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000050c0
- [ 20.965221] usb usb2: configuration #1 chosen from 1 choice
- [ 20.965245] hub 2-0:1.0: USB hub found
- [ 20.965250] hub 2-0:1.0: 2 ports detected
- [ 20.965337] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- [ 20.965344] uhci_hcd 0000:00:1d.0: setting latency timer to 64
- [ 20.965347] uhci_hcd 0000:00:1d.0: UHCI Host Controller
- [ 20.965387] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
- [ 20.965420] uhci_hcd 0000:00:1d.0: irq 23, io base 0x000050a0
- [ 20.965491] usb usb3: configuration #1 chosen from 1 choice
- [ 20.965515] hub 3-0:1.0: USB hub found
- [ 20.965521] hub 3-0:1.0: 2 ports detected
- [ 20.965602] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 20.965608] uhci_hcd 0000:00:1d.1: setting latency timer to 64
- [ 20.965611] uhci_hcd 0000:00:1d.1: UHCI Host Controller
- [ 20.965655] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
- [ 20.965690] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00005080
- [ 20.965762] usb usb4: configuration #1 chosen from 1 choice
- [ 20.965786] hub 4-0:1.0: USB hub found
- [ 20.965792] hub 4-0:1.0: 2 ports detected
- [ 20.965873] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16
- [ 20.965880] uhci_hcd 0000:00:1d.2: setting latency timer to 64
- [ 20.965885] uhci_hcd 0000:00:1d.2: UHCI Host Controller
- [ 20.965930] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
- [ 20.965970] uhci_hcd 0000:00:1d.2: irq 16, io base 0x00005060
- [ 20.966045] usb usb5: configuration #1 chosen from 1 choice
- [ 20.966071] hub 5-0:1.0: USB hub found
- [ 20.966077] hub 5-0:1.0: 2 ports detected
- [ 20.966167] uhci_hcd 0000:00:1d.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 20.966191] uhci_hcd 0000:00:1d.3: setting latency timer to 64
- [ 20.966197] uhci_hcd 0000:00:1d.3: UHCI Host Controller
- [ 20.966239] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 6
- [ 20.966296] uhci_hcd 0000:00:1d.3: irq 18, io base 0x00005040
- [ 20.966374] usb usb6: configuration #1 chosen from 1 choice
- [ 20.966397] hub 6-0:1.0: USB hub found
- [ 20.966403] hub 6-0:1.0: 2 ports detected
- [ 20.975842] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 20.975845] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
- [ 20.975877] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
- [ 20.975908] ehci_hcd 0000:00:1a.7: setting latency timer to 64
- [ 20.975911] ehci_hcd 0000:00:1a.7: EHCI Host Controller
- [ 20.975979] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7
- [ 20.979924] ehci_hcd 0000:00:1a.7: debug port 1
- [ 20.979939] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
- [ 20.979945] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xd6705c00
- [ 20.992517] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
- [ 20.992603] usb usb7: configuration #1 chosen from 1 choice
- [ 20.992631] hub 7-0:1.0: USB hub found
- [ 20.992638] hub 7-0:1.0: 4 ports detected
- [ 20.992761] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- [ 20.992792] ehci_hcd 0000:00:1d.7: setting latency timer to 64
- [ 20.992797] ehci_hcd 0000:00:1d.7: EHCI Host Controller
- [ 20.992848] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
- [ 20.996803] ehci_hcd 0000:00:1d.7: debug port 1
- [ 20.996817] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
- [ 20.996823] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd6705800
- [ 21.012518] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
- [ 21.012601] usb usb8: configuration #1 chosen from 1 choice
- [ 21.012634] hub 8-0:1.0: USB hub found
- [ 21.012642] hub 8-0:1.0: 8 ports detected
- [ 21.018062] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
- [ 21.018080] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 21.018132] r8169 0000:02:00.0: setting latency timer to 64
- [ 21.018358] r8169 0000:02:00.0: irq 2299 for MSI/MSI-X
- [ 21.019012] eth0: RTL8102e at 0xf7c90000, 00:1e:33:76:5c:bb, XID 34a00000 IRQ 2299
- [ 21.304033] usb 7-2: new high speed USB device using ehci_hcd and address 2
- [ 21.475561] usb 7-2: configuration #1 chosen from 1 choice
- [ 22.000091] Clocksource tsc unstable (delta = -414602447 ns)
- [ 22.838945] ISO 9660 Extensions: Microsoft Joliet Level 3
- [ 22.971721] ISO 9660 Extensions: RRIP_1991A
- [ 23.239581] aufs 20080922
- [ 23.431000] squashfs: version 3.3 (2007/10/31) Phillip Lougher
- [ 228.388507] udev: starting version 137
- [ 229.666302] iTCO_vendor_support: vendor-support=0
- [ 229.667552] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.04
- [ 229.667829] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
- [ 229.667893] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
- [ 229.768533] cfg80211: Using static regulatory domain info
- [ 229.768537] cfg80211: Regulatory domain: US
- [ 229.768539] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 229.768541] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
- [ 229.768543] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
- [ 229.768545] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
- [ 229.768548] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
- [ 229.768550] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
- [ 229.768552] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
- [ 229.768554] cfg80211: Calling CRDA for country: US
- [ 229.899451] input: PC Speaker as /devices/platform/pcspkr/input/input5
- [ 230.140160] Linux agpgart interface v0.103
- [ 230.382736] Linux video capture interface: v2.00
- [ 230.386330] agpgart-intel 0000:00:00.0: Intel Mobile Intel? GM45 Express Chipset
- [ 230.386995] agpgart-intel 0000:00:00.0: detected 131068K stolen memory
- [ 230.389268] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
- [ 230.536624] acpi device:04: registered as cooling_device3
- [ 230.536967] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/input/input6
- [ 230.544653] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
- [ 230.584579] uvcvideo: Found UVC 1.00 device CNF7051 (04f2:b070)
- [ 230.586225] input: CNF7051 as /devices/pci0000:00/0000:00:1a.7/usb7/7-2/7-2:1.0/input/input7
- [ 230.600052] usbcore: registered new interface driver uvcvideo
- [ 230.600077] USB Video Class driver (v0.1.0)
- [ 230.763458] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
- [ 230.763461] iwlagn: Copyright(c) 2003-2008 Intel Corporation
- [ 230.763539] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- [ 230.763549] iwlagn 0000:03:00.0: setting latency timer to 64
- [ 230.763599] iwlagn: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
- [ 230.793211] iwlagn: Tunable channels: 13 802.11bg, 24 802.11a channels
- [ 230.800677] iwlagn 0000:03:00.0: PCI INT A disabled
- [ 230.801517] phy0: Selected rate control algorithm 'iwl-agn-rs'
- [ 231.067795] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
- [ 231.067949] HDA Intel 0000:00:1b.0: setting latency timer to 64
- [ 231.097856] hda_codec: Unknown model for ALC268, trying auto-probe from BIOS...
- [ 231.333104] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x9280b1, caps: 0xa04711/0xa04000
- [ 231.333114] synaptics: Toshiba Satellite L300 detected, limiting rate to 40pps.
- [ 231.424535] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
- [ 237.092267] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
- [ 237.125972] apm: BIOS not found.
- [ 237.421870] lp: driver loaded but no devices found
- [ 237.493422] ppdev: user-space parallel port driver
- [ 243.431265] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 243.431272] Bluetooth: BNEP filters: protocol multicast
- [ 243.526458] Bridge firewalling registered
- [ 248.395316] r8169: eth0: link down
- [ 248.395769] ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 248.400334] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- [ 248.400448] iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006)
- [ 248.400591] iwlagn 0000:03:00.0: irq 2298 for MSI/MSI-X
- [ 248.400685] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-5000-1.ucode
- [ 250.959022] Registered led device: iwl-phy0:radio
- [ 250.959071] Registered led device: iwl-phy0:assoc
- [ 250.959108] Registered led device: iwl-phy0:RX
- [ 250.959143] Registered led device: iwl-phy0:TX
- [ 250.970340] ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 255.156287] [drm] Initialized drm 1.1.0 20060810
- [ 255.222524] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 255.222537] pci 0000:00:02.0: setting latency timer to 64
- [ 255.223142] pci 0000:00:02.0: irq 2297 for MSI/MSI-X
- [ 255.223331] [drm] Initialized i915 1.6.0 20080730 on minor 0
- [ 280.540175] usb 8-1: new high speed USB device using ehci_hcd and address 2
- [ 280.685025] usb 8-1: configuration #1 chosen from 1 choice
- [ 281.007085] Initializing USB Mass Storage driver...
- [ 281.013424] scsi6 : SCSI emulation for USB Mass Storage devices
- [ 281.016776] usbcore: registered new interface driver usb-storage
- [ 281.016787] USB Mass Storage support registered.
- [ 281.017030] usb-storage: device found at 2
- [ 281.017035] usb-storage: waiting for device to settle before scanning
- [ 286.039503] usb-storage: device scan complete
- [ 286.070319] scsi 6:0:0:0: Direct-Access Kingston DataTraveler 150 PMAP PQ: 0 ANSI: 0 CCS
- [ 286.337243] sd 6:0:0:0: [sdb] 63037440 512-byte hardware sectors: (32.2 GB/30.0 GiB)
- [ 286.337732] sd 6:0:0:0: [sdb] Write Protect is off
- [ 286.337739] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00
- [ 286.337744] sd 6:0:0:0: [sdb] Assuming drive cache: write through
- [ 286.340359] sd 6:0:0:0: [sdb] 63037440 512-byte hardware sectors: (32.2 GB/30.0 GiB)
- [ 286.340858] sd 6:0:0:0: [sdb] Write Protect is off
- [ 286.340866] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00
- [ 286.340874] sd 6:0:0:0: [sdb] Assuming drive cache: write through
- [ 286.340884] sdb: sdb1
- [ 286.383772] sd 6:0:0:0: [sdb] Attached SCSI removable disk
- [ 286.383912] sd 6:0:0:0: Attached scsi generic sg2 type 0
- [ 300.478814] CPU0 attaching NULL sched-domain.
- [ 300.478826] CPU1 attaching NULL sched-domain.
- [ 300.483221] CPU0 attaching sched-domain:
- [ 300.483229] domain 0: span 0-1 level MC
- [ 300.483235] groups: 0 1
- [ 300.483248] CPU1 attaching sched-domain:
- [ 300.483253] domain 0: span 0-1 level MC
- [ 300.483259] groups: 1 0
- [ 411.964582] mtrr: no MTRR for c0000000,10000000 found
- [ 442.339605] CPU0 attaching NULL sched-domain.
- [ 442.339610] CPU1 attaching NULL sched-domain.
- [ 442.350690] CPU0 attaching sched-domain:
- [ 442.350693] domain 0: span 0-1 level MC
- [ 442.350696] groups: 0 1
- [ 442.350701] CPU1 attaching sched-domain:
- [ 442.350703] domain 0: span 0-1 level MC
- [ 442.350705] groups: 1 0
- [ 537.896751] wlan0: authenticate with AP 00:11:d8:30:bf:0a
- [ 537.898766] wlan0: authenticated
- [ 537.898776] wlan0: associate with AP 00:11:d8:30:bf:0a
- [ 537.901335] wlan0: RX AssocResp from 00:11:d8:30:bf:0a (capab=0x411 status=0 aid=2)
- [ 537.901341] wlan0: associated
- [ 537.905074] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 548.612148] wlan0: no IPv6 routers present
- [ 724.325094] wlan0: disassociating by local choice (reason=3)
- [ 724.348516] iwlagn: index 0 not used in uCode key table.
- [ 725.457272] mtrr: no MTRR for c0000000,10000000 found
- [ 747.615990] CPU0 attaching NULL sched-domain.
- [ 747.615996] CPU1 attaching NULL sched-domain.
- [ 747.628571] CPU0 attaching sched-domain:
- [ 747.628575] domain 0: span 0-1 level MC
- [ 747.628578] groups: 0 1
- [ 747.628584] CPU1 attaching sched-domain:
- [ 747.628586] domain 0: span 0-1 level MC
- [ 747.628588] groups: 1 0
- [ 750.635340] wlan0: deauthenticated
- [ 750.636261] wlan0: authenticate with AP 00:11:d8:30:bf:0a
- [ 751.639636] wlan0: direct probe to AP 00:11:d8:30:bf:0a try 1
- [ 751.836297] wlan0: direct probe to AP 00:11:d8:30:bf:0a try 2
- [ 751.838160] wlan0 direct probe responded
- [ 751.838165] wlan0: authenticate with AP 00:11:d8:30:bf:0a
- [ 751.839978] wlan0: authenticated
- [ 751.839982] wlan0: associate with AP 00:11:d8:30:bf:0a
- [ 751.842190] wlan0: RX AssocResp from 00:11:d8:30:bf:0a (capab=0x411 status=0 aid=2)
- [ 751.842193] wlan0: associated
- [ 1664.396084] notification-da[7486]: segfault at b6e9f714 ip b7781018 sp bfce762c error 4 in libc-2.9.so[b770a000+15c000]
- [ 1774.932225] wlan0: disassociating by local choice (reason=3)
- [ 1774.952012] iwlagn: index 0 not used in uCode key table.
- [ 1776.085770] mtrr: no MTRR for c0000000,10000000 found
- [ 1795.851759] wlan0: deauthenticated
- [ 1799.722826] CPU0 attaching NULL sched-domain.
- [ 1799.722831] CPU1 attaching NULL sched-domain.
- [ 1799.732612] CPU0 attaching sched-domain:
- [ 1799.732616] domain 0: span 0-1 level MC
- [ 1799.732619] groups: 0 1
- [ 1799.732625] CPU1 attaching sched-domain:
- [ 1799.732627] domain 0: span 0-1 level MC
- [ 1799.732629] groups: 1 0
- [ 1802.920634] wlan0: authenticate with AP 00:11:d8:30:bf:0a
- [ 1803.920024] wlan0: direct probe to AP 00:11:d8:30:bf:0a try 1
- [ 1803.921872] wlan0 direct probe responded
- [ 1803.921876] wlan0: authenticate with AP 00:11:d8:30:bf:0a
- [ 1803.923631] wlan0: authenticated
- [ 1803.923635] wlan0: associate with AP 00:11:d8:30:bf:0a
- [ 1803.925715] wlan0: RX AssocResp from 00:11:d8:30:bf:0a (capab=0x411 status=0 aid=2)
- [ 1803.925719] wlan0: associated
- [ 5318.132250] usb 8-1: USB disconnect, address 2
- [ 5616.428187] usb 8-2: new high speed USB device using ehci_hcd and address 3
- [ 5616.574504] usb 8-2: configuration #1 chosen from 1 choice
- [ 5616.576409] scsi7 : SCSI emulation for USB Mass Storage devices
- [ 5616.577450] usb-storage: device found at 3
- [ 5616.577455] usb-storage: waiting for device to settle before scanning
- [ 5621.576452] usb-storage: device scan complete
- [ 5621.607345] scsi 7:0:0:0: Direct-Access Kingston DataTraveler 150 PMAP PQ: 0 ANSI: 0 CCS
- [ 5623.215881] sd 7:0:0:0: [sdb] 63037440 512-byte hardware sectors: (32.2 GB/30.0 GiB)
- [ 5623.216376] sd 7:0:0:0: [sdb] Write Protect is off
- [ 5623.216379] sd 7:0:0:0: [sdb] Mode Sense: 23 00 00 00
- [ 5623.216381] sd 7:0:0:0: [sdb] Assuming drive cache: write through
- [ 5623.219797] sd 7:0:0:0: [sdb] 63037440 512-byte hardware sectors: (32.2 GB/30.0 GiB)
- [ 5623.220675] sd 7:0:0:0: [sdb] Write Protect is off
- [ 5623.220682] sd 7:0:0:0: [sdb] Mode Sense: 23 00 00 00
- [ 5623.220688] sd 7:0:0:0: [sdb] Assuming drive cache: write through
- [ 5623.221377] sdb: sdb1
- [ 5623.265257] sd 7:0:0:0: [sdb] Attached SCSI removable disk
- [ 5623.265411] sd 7:0:0:0: Attached scsi generic sg2 type 0
- [ 5843.620179] usb 3-1: new low speed USB device using uhci_hcd and address 2
- [ 5843.794914] usb 3-1: configuration #1 chosen from 1 choice
- [ 5847.588232] usbcore: registered new interface driver hiddev
- [ 5847.588356] usbcore: registered new interface driver usbhid
- [ 5847.588362] usbhid: v2.6:USB HID core driver
- [ 5847.723689] input: A4Tech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/input/input9
- [ 5847.758512] a4tech 0003:09DA:0006.0001: input,hidraw0: USB HID v1.10 Mouse [A4Tech USB Optical Mouse] on usb-0000:00:1d.0-1/input0
- [12728.446940] firefox[13662]: segfault at b79c22fe ip b7cf9391 sp bfc99da4 error 4 in libc-2.9.so[b7ccb000+15c000]
- [13703.488126] aufs au_plink_append:279:dpkg[17160]: unexpectedly many pseudo links, 101
- [17481.784568] [drm:i915_gem_object_bind_to_gtt] *ERROR* GTT full, but LRU list empty
- [17481.784573] [drm:i915_gem_object_pin] *ERROR* Failure to bind: -12<3>[drm:i915_gem_evict_something] *ERROR* inactive empty 1 request empty 1 flushing empty 1
- [17482.382709] [drm:i915_gem_object_bind_to_gtt] *ERROR* GTT full, but LRU list empty
- [17482.382715] [drm:i915_gem_object_pin] *ERROR* Failure to bind: -12<3>[drm:i915_gem_evict_something] *ERROR* inactive empty 1 request empty 1 flushing empty 1
- [17506.299357] [drm:i915_gem_object_bind_to_gtt] *ERROR* GTT full, but LRU list empty
- [17506.299365] [drm:i915_gem_object_pin] *ERROR* Failure to bind: -12<3>[drm:i915_gem_evict_something] *ERROR* inactive empty 1 request empty 1 flushing empty 1
- [17536.297713] [drm:i915_gem_object_bind_to_gtt] *ERROR* GTT full, but LRU list empty
- [17536.297720] [drm:i915_gem_object_pin] *ERROR* Failure to bind: -12<3>[drm:i915_gem_evict_something] *ERROR* inactive empty 1 request empty 1 flushing empty 1
- [17554.727935] [drm:i915_gem_object_bind_to_gtt] *ERROR* GTT full, but LRU list empty
- [17554.727942] [drm:i915_gem_object_pin] *ERROR* Failure to bind: -12<3>[drm:i915_gem_evict_something] *ERROR* inactive empty 1 request empty 1 flushing empty 1
- [17584.380485] [drm:i915_gem_object_bind_to_gtt] *ERROR* GTT full, but LRU list empty
- [17584.380491] [drm:i915_gem_object_pin] *ERROR* Failure to bind: -12<3>[drm:i915_gem_evict_something] *ERROR* inactive empty 1 request empty 1 flushing empty 1
- [17586.452334] [drm:i915_gem_object_bind_to_gtt] *ERROR* GTT full, but LRU list empty
- [17586.452340] [drm:i915_gem_object_pin] *ERROR* Failure to bind: -12<3>[drm:i915_gem_evict_something] *ERROR* inactive empty 1 request empty 1 flushing empty 1
- [17594.875949] [drm:i915_gem_object_bind_to_gtt] *ERROR* GTT full, but LRU list empty
- [17594.875955] [drm:i915_gem_object_pin] *ERROR* Failure to bind: -12<3>[drm:i915_gem_evict_something] *ERROR* inactive empty 1 request empty 1 flushing empty 1
- [17596.283439] [drm:i915_gem_object_bind_to_gtt] *ERROR* GTT full, but LRU list empty
- [17596.283445] [drm:i915_gem_object_pin] *ERROR* Failure to bind: -12<3>[drm:i915_gem_evict_something] *ERROR* inactive empty 1 request empty 1 flushing empty 1
- [17630.725245] [drm:i915_gem_object_bind_to_gtt] *ERROR* GTT full, but LRU list empty
- [17630.725250] [drm:i915_gem_object_pin] *ERROR* Failure to bind: -12<3>[drm:i915_gem_evict_something] *ERROR* inactive empty 1 request empty 1 flushing empty 1
- [17696.184543] iwlagn: Error sending REPLY_SCAN_ABORT_CMD: time out after 500ms.
- [17706.129571] [drm:i915_gem_object_bind_to_gtt] *ERROR* GTT full, but LRU list empty
- [17706.129578] [drm:i915_gem_object_pin] *ERROR* Failure to bind: -12<3>[drm:i915_gem_evict_something] *ERROR* inactive empty 1 request empty 1 flushing empty 1
- [17737.188515] [drm:i915_gem_object_bind_to_gtt] *ERROR* GTT full, but LRU list empty
- [17737.188523] [drm:i915_gem_object_pin] *ERROR* Failure to bind: -12<3>[drm:i915_gem_evict_something] *ERROR* inactive empty 1 request empty 1 flushing empty 1
- [18245.516149] iwlagn: Error sending REPLY_SCAN_ABORT_CMD: time out after 500ms.
- [18245.516171] iwlagn: Aborted scan still in progress after 100ms
- [18245.516179] wlan0: Failed to config new SSID to the low-level driver
- [18245.516228] wlan0: disassociating by local choice (reason=3)
- [18246.036670] iwlagn: Error sending REPLY_SCAN_ABORT_CMD: time out after 500ms.
- [18246.036693] iwlagn: index 0 not used in uCode key table.
- [18382.834974] iwlagn 0000:03:00.0: PCI INT A disabled
- [18392.387978] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
- [18392.387987] iwlagn: Copyright(c) 2003-2008 Intel Corporation
- [18392.389364] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- [18392.389414] iwlagn 0000:03:00.0: setting latency timer to 64
- [18392.389804] iwlagn: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
- [18392.420493] iwlagn: Tunable channels: 13 802.11bg, 24 802.11a channels
- [18392.423028] phy1: Selected rate control algorithm 'iwl-agn-rs'
- [18396.495999] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- [18396.496241] iwlagn 0000:03:00.0: irq 2298 for MSI/MSI-X
- [18396.496328] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-5000-1.ucode
- [18398.625873] psmouse.c: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 1 bytes away.
- [18398.670468] Registered led device: iwl-phy1:radio
- [18398.670524] Registered led device: iwl-phy1:assoc
- [18398.670564] Registered led device: iwl-phy1:RX
- [18398.670601] Registered led device: iwl-phy1:TX
- [18398.686534] ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [18408.928092] wlan0: authenticate with AP 00:11:d8:30:bf:0a
- [18408.930119] wlan0: authenticated
- [18408.930130] wlan0: associate with AP 00:11:d8:30:bf:0a
- [18408.933162] wlan0: RX AssocResp from 00:11:d8:30:bf:0a (capab=0x411 status=0 aid=2)
- [18408.933169] wlan0: associated
- [18408.935242] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [18419.660059] wlan0: no IPv6 routers present
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement