Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Linux version 2.6.24-16-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008 (Ubuntu 2.6.24-16.30-generic)
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
- [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
- [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
- [ 0.000000] BIOS-e820: 0000000000100000 - 000000003bef0000 (usable)
- [ 0.000000] BIOS-e820: 000000003bef0000 - 000000003bef3000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 000000003bef3000 - 000000003bf00000 (ACPI data)
- [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
- [ 0.000000] 62MB HIGHMEM available.
- [ 0.000000] 896MB LOWMEM available.
- [ 0.000000] found SMP MP-table at 000f4200
- [ 0.000000] Entering add_active_range(0, 0, 245488) 0 entries of 256 used
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0 -> 4096
- [ 0.000000] Normal 4096 -> 229376
- [ 0.000000] HighMem 229376 -> 245488
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[1] active PFN ranges
- [ 0.000000] 0: 0 -> 245488
- [ 0.000000] On node 0 totalpages: 245488
- [ 0.000000] DMA zone: 32 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 4064 pages, LIFO batch:0
- [ 0.000000] Normal zone: 1760 pages used for memmap
- [ 0.000000] Normal zone: 223520 pages, LIFO batch:31
- [ 0.000000] HighMem zone: 125 pages used for memmap
- [ 0.000000] HighMem zone: 15987 pages, LIFO batch:3
- [ 0.000000] Movable zone: 0 pages used for memmap
- [ 0.000000] DMI 2.4 present.
- [ 0.000000] ACPI: RSDP signature @ 0xC00F8070 checksum 0
- [ 0.000000] ACPI: RSDP 000F8070, 0014 (r0 RS480 )
- [ 0.000000] ACPI: RSDT 3BEF3040, 0038 (r1 RS480 AWRDACPI 42302E31 AWRD 0)
- [ 0.000000] ACPI: FACP 3BEF30C0, 0084 (r2 RS480 AWRDACPI 42302E31 AWRD 0)
- [ 0.000000] ACPI: DSDT 3BEF31C0, 36D2 (r1 RS480 AWRDACPI 1000 MSFT 100000E)
- [ 0.000000] ACPI: FACS 3BEF0000, 0040
- [ 0.000000] ACPI: SSDT 3BEF69C0, 00B5 (r1 PTLTD POWERNOW 1 LTP 1)
- [ 0.000000] ACPI: SRAT 3BEF6AC0, 0090 (r1 AMD HAMMER 1 AMD 1)
- [ 0.000000] ACPI: MCFG 3BEF6BC0, 003C (r1 RS480 AWRDACPI 42302E31 AWRD 0)
- [ 0.000000] ACPI: APIC 3BEF6900, 0068 (r1 RS480 AWRDACPI 42302E31 AWRD 0)
- [ 0.000000] ATI board detected. Disabling timer routing over 8254.
- [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
- [ 0.000000] Processor #0 15:15 APIC version 16
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
- [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3bf00000:a4100000)
- [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
- [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
- [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243571
- [ 0.000000] Kernel command line: root=UUID=38c68c0d-ca03-412e-9a02-1f06784be22d ro quiet splash
- [ 0.000000] mapped APIC to ffffb000 (fee00000)
- [ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
- [ 0.000000] Enabling fast FPU save and restore... done.
- [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
- [ 0.000000] Initializing CPU#0
- [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
- [ 0.000000] Detected 1790.870 MHz processor.
- [ 15.084456] Console: colour VGA+ 80x25
- [ 15.084460] console [tty0] enabled
- [ 15.084754] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 15.085116] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 15.103441] Memory: 961056k/981952k available (2157k kernel code, 20280k reserved, 998k data, 364k init, 64448k highmem)
- [ 15.103449] virtual kernel memory layout:
- [ 15.103450] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
- [ 15.103452] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
- [ 15.103453] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
- [ 15.103454] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
- [ 15.103455] .init : 0xc041b000 - 0xc0476000 ( 364 kB)
- [ 15.103457] .data : 0xc031b5a4 - 0xc0414dc4 ( 998 kB)
- [ 15.103458] .text : 0xc0100000 - 0xc031b5a4 (2157 kB)
- [ 15.103461] Checking if this processor honours the WP bit even in supervisor mode... Ok.
- [ 15.103490] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
- [ 15.183406] Calibrating delay using timer specific routine.. 3585.38 BogoMIPS (lpj=7170767)
- [ 15.183429] Security Framework initialized
- [ 15.183434] SELinux: Disabled at boot.
- [ 15.183448] AppArmor: AppArmor initialized
- [ 15.183452] Failure registering capabilities with primary security module.
- [ 15.183459] Mount-cache hash table entries: 512
- [ 15.183564] CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001 00000000
- [ 15.183573] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
- [ 15.183575] CPU: L2 Cache: 512K (64 bytes/line)
- [ 15.183578] CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001 00000000
- [ 15.183587] Compat vDSO mapped to ffffe000.
- [ 15.183597] Checking 'hlt' instruction... OK.
- [ 15.199645] SMP alternatives: switching to UP code
- [ 15.200706] Freeing SMP alternatives: 11k freed
- [ 15.200810] Early unpacking initramfs... done
- [ 15.554977] ACPI: Core revision 20070126
- [ 15.555026] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
- [ 15.562986] CPU0: AMD Athlon(tm) 64 Processor 3000+ stepping 00
- [ 15.563007] Total of 1 processors activated (3585.38 BogoMIPS).
- [ 15.563174] ENABLING IO-APIC IRQs
- [ 15.563357] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 15.603032] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
- [ 15.603074] ...trying to set up timer (IRQ0) through the 8259A ... failed.
- [ 15.603076] ...trying to set up timer as Virtual Wire IRQ... works.
- [ 15.746697] Brought up 1 CPUs
- [ 15.746719] CPU0 attaching sched-domain:
- [ 15.746721] domain 0: span 01
- [ 15.746723] groups: 01
- [ 15.746867] net_namespace: 64 bytes
- [ 15.746871] Booting paravirtualized kernel on bare hardware
- [ 15.747336] Time: 10:46:50 Date: 05/07/08
- [ 15.747356] NET: Registered protocol family 16
- [ 15.747506] EISA bus registered
- [ 15.747534] ACPI: bus type pci registered
- [ 15.780499] PCI: PCI BIOS revision 3.00 entry at 0xfa4b0, last bus=2
- [ 15.780501] PCI: Using configuration type 1
- [ 15.780503] Setting up standard PCI resources
- [ 15.783645] ACPI: EC: Look up EC in DSDT
- [ 15.786314] ACPI: Interpreter enabled
- [ 15.786316] ACPI: (supports S0 S1 S3 S5)
- [ 15.786327] ACPI: Using IOAPIC for interrupt routing
- [ 15.789376] ACPI: PCI Root Bridge [PCI0] (0000:00)
- [ 15.790588] PCI: Transparent bridge - 0000:00:14.4
- [ 15.790637] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 15.790779] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
- [ 15.790904] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
- [ 15.802985] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
- [ 15.803066] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
- [ 15.803145] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
- [ 15.803223] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
- [ 15.803302] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11)
- [ 15.803381] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11)
- [ 15.803464] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 *11)
- [ 15.803544] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *10 11)
- [ 15.803634] Linux Plug and Play Support v0.97 (c) Adam Belay
- [ 15.803657] pnp: PnP ACPI init
- [ 15.803663] ACPI: bus type pnp registered
- [ 15.805689] pnpacpi: exceeded the max number of mem resources: 12
- [ 15.805732] pnp: PnP ACPI: found 13 devices
- [ 15.805733] ACPI: ACPI bus type pnp unregistered
- [ 15.805736] PnPBIOS: Disabled by ACPI PNP
- [ 15.805906] PCI: Using ACPI for IRQ routing
- [ 15.805909] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
- [ 15.805916] PCI: Cannot allocate resource region 3 of device 0000:00:00.0
- [ 15.854545] NET: Registered protocol family 8
- [ 15.854547] NET: Registered protocol family 20
- [ 15.854600] AppArmor: AppArmor Filesystem Enabled
- [ 15.858513] Time: tsc clocksource has been installed.
- [ 15.866530] system 00:01: ioport range 0x228-0x22f has been reserved
- [ 15.866533] system 00:01: ioport range 0x40b-0x40b has been reserved
- [ 15.866536] system 00:01: ioport range 0x4d6-0x4d6 has been reserved
- [ 15.866538] system 00:01: ioport range 0xc00-0xc01 has been reserved
- [ 15.866541] system 00:01: ioport range 0xc14-0xc14 has been reserved
- [ 15.866544] system 00:01: ioport range 0xc50-0xc52 has been reserved
- [ 15.866546] system 00:01: ioport range 0xc6c-0xc6d has been reserved
- [ 15.866549] system 00:01: ioport range 0xc6f-0xc6f has been reserved
- [ 15.866552] system 00:01: ioport range 0xcd4-0xcdf has been reserved
- [ 15.866555] system 00:01: ioport range 0x4000-0x40fe has been reserved
- [ 15.866557] system 00:01: ioport range 0x4210-0x4217 has been reserved
- [ 15.866564] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
- [ 15.866567] system 00:06: ioport range 0x800-0x87f has been reserved
- [ 15.866573] system 00:0b: iomem range 0xe0000000-0xefffffff could not be reserved
- [ 15.866579] system 00:0c: iomem range 0xd0000-0xd3fff has been reserved
- [ 15.866582] system 00:0c: iomem range 0xf0000-0xf7fff could not be reserved
- [ 15.866585] system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved
- [ 15.866587] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved
- [ 15.866590] system 00:0c: iomem range 0x3bf00000-0x3bffffff has been reserved
- [ 15.866593] system 00:0c: iomem range 0x3bef0000-0x3befffff could not be reserved
- [ 15.866596] system 00:0c: iomem range 0xffff0000-0xffffffff could not be reserved
- [ 15.866599] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
- [ 15.866602] system 00:0c: iomem range 0x100000-0x3beeffff could not be reserved
- [ 15.866605] system 00:0c: iomem range 0x3c000000-0x3fffffff has been reserved
- [ 15.866608] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
- [ 15.866611] system 00:0c: iomem range 0xfee00000-0xfee00fff could not be reserved
- [ 15.896902] PCI: Bridge: 0000:00:01.0
- [ 15.896904] IO window: e000-efff
- [ 15.896908] MEM window: fdd00000-fddfffff
- [ 15.896910] PREFETCH window: d8000000-dfffffff
- [ 15.896914] PCI: Bridge: 0000:00:14.4
- [ 15.896917] IO window: d000-dfff
- [ 15.896923] MEM window: fdc00000-fdcfffff
- [ 15.896927] PREFETCH window: fde00000-fdefffff
- [ 15.896954] NET: Registered protocol family 2
- [ 15.934480] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 15.934747] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 15.935408] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- [ 15.935734] TCP: Hash tables configured (established 131072 bind 65536)
- [ 15.935736] TCP reno registered
- [ 15.946516] checking if image is initramfs... it is
- [ 16.397796] Switched to high resolution mode on CPU 0
- [ 16.627715] Freeing initrd memory: 7692k freed
- [ 16.628198] audit: initializing netlink socket (disabled)
- [ 16.628210] audit(1210157210.380:1): initialized
- [ 16.628326] highmem bounce pool size: 64 pages
- [ 16.629858] VFS: Disk quotas dquot_6.5.1
- [ 16.629917] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 16.630031] io scheduler noop registered
- [ 16.630033] io scheduler anticipatory registered
- [ 16.630035] io scheduler deadline registered
- [ 16.630044] io scheduler cfq registered (default)
- [ 16.630050] PCI: MSI quirk detected. MSI deactivated.
- [ 16.685340] Boot video device is 0000:01:05.0
- [ 16.685541] isapnp: Scanning for PnP cards...
- [ 17.039583] isapnp: No Plug & Play device found
- [ 17.062850] Real Time Clock Driver v1.12ac
- [ 17.062923] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
- [ 17.063069] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 17.063623] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 17.064224] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
- [ 17.064282] input: Macintosh mouse button emulation as /devices/virtual/input/input0
- [ 17.064353] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
- [ 17.064356] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
- [ 17.064923] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 17.069024] mice: PS/2 mouse device common for all mice
- [ 17.069117] EISA: Probing bus 0 at eisa.0
- [ 17.069137] Cannot allocate resource for EISA slot 4
- [ 17.069158] EISA: Detected 0 cards.
- [ 17.069160] cpuidle: using governor ladder
- [ 17.069162] cpuidle: using governor menu
- [ 17.069236] NET: Registered protocol family 1
- [ 17.069261] Using IPI No-Shortcut mode
- [ 17.069285] registered taskstats version 1
- [ 17.069383] Magic number: 8:812:779
- [ 17.069480] hash matches device ptyq1
- [ 17.069515] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
- [ 17.069516] EDD information not available.
- [ 17.069714] Freeing unused kernel memory: 364k freed
- [ 17.096739] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
- [ 18.314967] fuse init (API version 7.9)
- [ 18.336180] ACPI: Processor [CPU0] (supports 8 throttling states)
- [ 18.336192] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
- [ 18.920397] SCSI subsystem initialized
- [ 18.994033] libata version 3.00 loaded.
- [ 19.002080] usbcore: registered new interface driver usbfs
- [ 19.002100] usbcore: registered new interface driver hub
- [ 19.014007] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
- [ 19.015345] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
- [ 19.026002] usbcore: registered new device driver usb
- [ 19.038011] ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 23 (level, low) -> IRQ 16
- [ 19.038062] ACPI: PCI interrupt for device 0000:00:11.0 disabled
- [ 19.038085] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 17
- [ 19.038111] ACPI: PCI interrupt for device 0000:00:12.0 disabled
- [ 19.038130] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 18
- [ 19.038155] ACPI: PCI interrupt for device 0000:00:14.1 disabled
- [ 19.061954] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 19.062001] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19
- [ 19.062015] ohci_hcd 0000:00:13.0: OHCI Host Controller
- [ 19.062216] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
- [ 19.062235] ohci_hcd 0000:00:13.0: irq 19, io mem 0xfe02d000
- [ 19.122573] usb usb1: configuration #1 chosen from 1 choice
- [ 19.122595] hub 1-0:1.0: USB hub found
- [ 19.122605] hub 1-0:1.0: 4 ports detected
- [ 19.132081] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
- [ 19.225792] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19
- [ 19.225807] ohci_hcd 0000:00:13.1: OHCI Host Controller
- [ 19.225829] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
- [ 19.225844] ohci_hcd 0000:00:13.1: irq 19, io mem 0xfe02c000
- [ 19.239829] Floppy drive(s): fd0 is 1.44M
- [ 19.257457] FDC 0 is a post-1991 82077
- [ 19.285699] usb usb2: configuration #1 chosen from 1 choice
- [ 19.285722] hub 2-0:1.0: USB hub found
- [ 19.285732] hub 2-0:1.0: 4 ports detected
- [ 19.389599] sata_sil 0000:00:11.0: version 2.3
- [ 19.389635] ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 23 (level, low) -> IRQ 16
- [ 19.391424] scsi0 : sata_sil
- [ 19.392164] scsi1 : sata_sil
- [ 19.392196] ata1: SATA max UDMA/100 mmio m512@0xfe02f000 tf 0xfe02f080 irq 16
- [ 19.392200] ata2: SATA max UDMA/100 mmio m512@0xfe02f000 tf 0xfe02f0c0 irq 16
- [ 19.529241] usb 1-2: new low speed USB device using ohci_hcd and address 2
- [ 19.701024] ata1: SATA link down (SStatus 0 SControl 300)
- [ 19.737067] usb 1-2: configuration #1 chosen from 1 choice
- [ 20.012545] ata2: SATA link down (SStatus 0 SControl 300)
- [ 20.012613] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 17
- [ 20.012695] scsi2 : sata_sil
- [ 20.012895] scsi3 : sata_sil
- [ 20.012921] ata3: SATA max UDMA/100 mmio m512@0xfe02e000 tf 0xfe02e080 irq 17
- [ 20.012925] ata4: SATA max UDMA/100 mmio m512@0xfe02e000 tf 0xfe02e0c0 irq 17
- [ 20.040494] usb 1-4: new full speed USB device using ohci_hcd and address 3
- [ 20.258324] usb 1-4: configuration #1 chosen from 1 choice
- [ 20.479892] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 20.488444] ata3.00: ATA-7: SAMSUNG SP2004C, VM100-33, max UDMA7
- [ 20.488447] ata3.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/32)
- [ 20.496434] ata3.00: configured for UDMA/100
- [ 20.563740] usb 2-1: new full speed USB device using ohci_hcd and address 2
- [ 20.807399] ata4: SATA link down (SStatus 0 SControl 300)
- [ 20.807512] scsi 2:0:0:0: Direct-Access ATA SAMSUNG SP2004C VM10 PQ: 0 ANSI: 5
- [ 20.807951] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19
- [ 20.807965] ehci_hcd 0000:00:13.2: EHCI Host Controller
- [ 20.807989] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
- [ 20.808044] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe02b000
- [ 20.812503] usb 2-1: unable to read config index 0 descriptor/all
- [ 20.812509] usb 2-1: can't read configurations, error -62
- [ 20.817273] Driver 'sd' needs updating - please use bus_type methods
- [ 20.817342] sd 2:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
- [ 20.817353] sd 2:0:0:0: [sda] Write Protect is off
- [ 20.817356] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 20.817372] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 20.817410] sd 2:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
- [ 20.817419] sd 2:0:0:0: [sda] Write Protect is off
- [ 20.817421] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 20.817436] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 20.817439] sda:<6>ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
- [ 20.819499] usb usb3: configuration #1 chosen from 1 choice
- [ 20.819521] hub 3-0:1.0: USB hub found
- [ 20.819527] hub 3-0:1.0: 8 ports detected
- [ 20.824311] sda1 sda2 sda3 < sda5 sda6 > sda4
- [ 20.856549] sd 2:0:0:0: [sda] Attached SCSI disk
- [ 20.863078] sd 2:0:0:0: Attached scsi generic sg0 type 0
- [ 20.875356] usb 1-2: USB disconnect, address 2
- [ 20.923567] ATIIXP: IDE controller (0x1002:0x4376 rev 0x00) at PCI slot 0000:00:14.1
- [ 20.923584] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 18
- [ 20.923594] ATIIXP: not 100% native mode: will probe irqs later
- [ 20.923610] ide0: BM-DMA at 0xf300-0xf307, BIOS settings: hda:pio, hdb:pio
- [ 20.923624] ide1: BM-DMA at 0xf308-0xf30f, BIOS settings: hdc:pio, hdd:pio
- [ 20.923633] Probing IDE interface ide0...
- [ 21.003127] usb 1-4: USB disconnect, address 3
- [ 21.130980] usbcore: registered new interface driver hiddev
- [ 21.131008] usbcore: registered new interface driver libusual
- [ 21.136171] Initializing USB Mass Storage driver...
- [ 21.187019] Attempting manual resume
- [ 21.187023] swsusp: Resume From Partition 8:6
- [ 21.187025] PM: Checking swsusp image.
- [ 21.187234] PM: Resume from disk failed.
- [ 21.215911] kjournald starting. Commit interval 5 seconds
- [ 21.215922] EXT3-fs: mounted filesystem with ordered data mode.
- [ 21.498400] usb 3-2: new high speed USB device using ehci_hcd and address 2
- [ 21.769438] usb 3-2: configuration #1 chosen from 1 choice
- [ 22.189409] usb 3-7: new high speed USB device using ehci_hcd and address 4
- [ 22.329674] hda: BENQ DVD DD DW1640, ATAPI CD/DVD-ROM drive
- [ 22.329704] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
- [ 22.330013] hda: UDMA/33 mode selected
- [ 22.330420] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
- [ 22.330608] hda: task_in_intr: status=0x51 { DriveReady SeekComplete Error }
- [ 22.330614] hda: task_in_intr: error=0x04 { AbortedCommand }
- [ 22.330617] ide: failed opcode was: 0xa1
- [ 22.330656] Probing IDE interface ide1...
- [ 22.333708] usb 3-7: configuration #1 chosen from 1 choice
- [ 22.334370] usbcore: registered new interface driver usbhid
- [ 22.334374] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
- [ 22.334564] scsi4 : SCSI emulation for USB Mass Storage devices
- [ 22.334610] usbcore: registered new interface driver usb-storage
- [ 22.334613] USB Mass Storage support registered.
- [ 22.334713] usb-storage: device found at 4
- [ 22.334714] usb-storage: waiting for device to settle before scanning
- [ 22.636756] usb 1-2: new low speed USB device using ohci_hcd and address 4
- [ 22.844624] usb 1-2: configuration #1 chosen from 1 choice
- [ 22.851694] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:13.0/usb1/1-2/1-2:1.0/input/input2
- [ 22.864453] input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:13.0-2
- [ 22.892561] 8139cp 0000:02:03.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
- [ 22.892565] 8139cp 0000:02:03.0: Try the "8139too" driver instead.
- [ 22.892697] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 21 (level, low) -> IRQ 21
- [ 22.945393] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[fdcfe000-fdcfe7ff] Max Packet=[2048] IR/IT contexts=[4/8]
- [ 24.218650] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc0000b1dbe6]
- [ 27.326574] usb-storage: device scan complete
- [ 27.330438] scsi 4:0:0:0: Direct-Access USB2.0 CF CardReader PQ: 0 ANSI: 0
- [ 27.334177] scsi 4:0:0:1: Direct-Access USB2.0 CBO CardReader PQ: 0 ANSI: 0
- [ 27.335823] sd 4:0:0:0: [sdb] Attached SCSI removable disk
- [ 27.335849] sd 4:0:0:0: Attached scsi generic sg1 type 0
- [ 27.337439] sd 4:0:0:1: [sdc] Attached SCSI removable disk
- [ 27.337461] sd 4:0:0:1: Attached scsi generic sg2 type 0
- [ 31.352327] input: PC Speaker as /devices/platform/pcspkr/input/input3
- [ 31.636192] parport_pc 00:09: reported by Plug and Play ACPI
- [ 31.636236] parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
- [ 31.781095] Linux agpgart interface v0.102
- [ 31.871845] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 31.915646] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- [ 32.147123] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
- [ 32.160344] input: Power Button (FF) as /devices/virtual/input/input4
- [ 32.187095] ACPI: Power Button (FF) [PWRF]
- [ 32.187147] input: Power Button (CM) as /devices/virtual/input/input5
- [ 32.211986] ACPI: Power Button (CM) [PWRB]
- [ 32.514096] 8139too Fast Ethernet driver 0.9.28
- [ 32.514165] ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 20 (level, low) -> IRQ 20
- [ 32.516194] eth0: RealTek RTL8139 at 0xdf00, 00:13:d3:2e:29:c6, IRQ 20
- [ 32.516197] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
- [ 33.556436] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
- [ 33.698337] [fglrx] Maximum main memory to use for locked dma buffers: 865 MBytes.
- [ 33.698371] [fglrx] ASYNCIO init succeed!
- [ 33.698489] [fglrx] PAT is enabled successfully!
- [ 33.698850] [fglrx] module loaded - fglrx 8.47.3 [Feb 25 2008] on minor 0
- [ 33.757954] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 33.757961] hda: status error: error=0x00 { }
- [ 33.757963] ide: failed opcode was: unknown
- [ 33.757966] hda: drive not ready for command
- [ 33.757970] hda: ATAPI CD-ROM drive, 0kB Cache
- [ 33.757973] Uniform CD-ROM driver Revision: 3.20
- [ 33.758009] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 33.758014] hda: status error: error=0x00 { }
- [ 33.758016] ide: failed opcode was: unknown
- [ 33.758018] hda: drive not ready for command
- [ 33.758052] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 33.758057] hda: status error: error=0x00 { }
- [ 33.758059] ide: failed opcode was: unknown
- [ 33.758061] hda: drive not ready for command
- [ 33.758095] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 33.758100] hda: status error: error=0x00 { }
- [ 33.758101] ide: failed opcode was: unknown
- [ 33.758103] hda: drive not ready for command
- [ 33.758137] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 33.758143] hda: status error: error=0x00 { }
- [ 33.758144] ide: failed opcode was: unknown
- [ 33.758146] hda: drive not ready for command
- [ 33.758181] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 33.758186] hda: status error: error=0x00 { }
- [ 33.758187] ide: failed opcode was: unknown
- [ 33.758189] hda: drive not ready for command
- [ 33.758224] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 33.758229] hda: status error: error=0x00 { }
- [ 33.758231] ide: failed opcode was: unknown
- [ 33.758233] hda: drive not ready for command
- [ 33.758267] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 33.758272] hda: status error: error=0x00 { }
- [ 33.758274] ide: failed opcode was: unknown
- [ 33.758276] hda: drive not ready for command
- [ 33.858152] ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 22
- [ 34.017002] rt73: init
- [ 34.017034] rt73: idVendor = 0x148f, idProduct = 0x2573
- [ 35.229587] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 35.229595] hda: status error: error=0x00 { }
- [ 35.229597] ide: failed opcode was: unknown
- [ 35.229601] hda: drive not ready for command
- [ 35.229638] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 35.229644] hda: status error: error=0x00 { }
- [ 35.229645] ide: failed opcode was: unknown
- [ 35.229647] hda: drive not ready for command
- [ 35.232185] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 35.232192] hda: status error: error=0x00 { }
- [ 35.232194] ide: failed opcode was: unknown
- [ 35.232197] hda: drive not ready for command
- [ 35.508519] rt73: using permanent MAC addr
- [ 35.508523] rt73: Active MAC addr: 00:0e:2e:f1:15:16
- [ 35.508526] rt73: Local MAC = 00:0e:2e:f1:15:16
- [ 35.509816] usbcore: registered new interface driver rt73
- [ 35.527484] rt73: driver version - 1.0.3.6 CVS
- [ 35.562327] rt73: using net dev supplied MAC addr
- [ 35.562331] rt73: Active MAC addr: 00:0e:2e:f1:15:16
- [ 35.562334] rt73: Local MAC = 00:0e:2e:f1:15:16
- [ 35.778738] lp0: using parport0 (interrupt-driven).
- [ 35.860138] Adding 2811332k swap on /dev/sda6. Priority:-1 extents:1 across:2811332k
- [ 36.397437] EXT3 FS on sda5, internal journal
- [ 36.522687] device-mapper: uevent: version 1.0.3
- [ 36.522713] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
- [ 37.006142] NET: Registered protocol family 17
- [ 37.273199] kjournald starting. Commit interval 5 seconds
- [ 37.273503] EXT3 FS on sda4, internal journal
- [ 37.273507] EXT3-fs: mounted filesystem with ordered data mode.
- [ 37.459644] kjournald starting. Commit interval 5 seconds
- [ 37.459901] EXT3 FS on sda2, internal journal
- [ 37.459905] EXT3-fs: mounted filesystem with ordered data mode.
- [ 37.951808] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 38.469300] No dock devices found.
- [ 38.808023] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3000+ processors (1 cpu cores) (version 2.20.00)
- [ 38.808051] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x6
- [ 38.808054] powernow-k8: 1 : fid 0x2 (1000 MHz), vid 0x12
- [ 39.813830] NET: Registered protocol family 10
- [ 39.814407] lo: Disabled Privacy Extensions
- [ 40.048995] ppdev: user-space parallel port driver
- [ 40.155486] audit(1210153634.577:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=4995 profile="/usr/sbin/cupsd" namespace="default"
- [ 40.204228] apm: BIOS not found.
- [ 76.089902] Marking TSC unstable due to: cpufreq changes.
- [ 76.113187] Time: acpi_pm clocksource has been installed.
- [ 76.233943] Clocksource tsc unstable (delta = -64067847 ns)
- [ 76.984011] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 76.984028] hda: status error: error=0x00 { }
- [ 76.984031] ide: failed opcode was: unknown
- [ 76.984036] hda: drive not ready for command
- [ 76.986733] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 76.986743] hda: status error: error=0x00 { }
- [ 76.986746] ide: failed opcode was: unknown
- [ 76.986750] hda: drive not ready for command
- [ 76.988661] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 76.988671] hda: status error: error=0x00 { }
- [ 76.988675] ide: failed opcode was: unknown
- [ 76.988678] hda: drive not ready for command
- [ 76.990038] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 76.990048] hda: status error: error=0x00 { }
- [ 76.990051] ide: failed opcode was: unknown
- [ 76.990055] hda: drive not ready for command
- [ 76.990098] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 76.990106] hda: status error: error=0x00 { }
- [ 76.990109] ide: failed opcode was: unknown
- [ 76.990113] hda: drive not ready for command
- [ 77.257493] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 77.257509] hda: status error: error=0x00 { }
- [ 77.257513] ide: failed opcode was: unknown
- [ 77.257519] hda: drive not ready for command
- [ 77.258382] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 77.258392] hda: status error: error=0x00 { }
- [ 77.258395] ide: failed opcode was: unknown
- [ 77.258399] hda: drive not ready for command
- [ 77.259169] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 77.259179] hda: status error: error=0x00 { }
- [ 77.259182] ide: failed opcode was: unknown
- [ 77.259186] hda: drive not ready for command
- [ 77.259948] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 77.259958] hda: status error: error=0x00 { }
- [ 77.259961] ide: failed opcode was: unknown
- [ 77.259965] hda: drive not ready for command
- [ 77.260752] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 77.260762] hda: status error: error=0x00 { }
- [ 77.260765] ide: failed opcode was: unknown
- [ 77.260769] hda: drive not ready for command
- [ 77.261555] cdrom: This disc doesn't have any tracks I recognize!
- [ 77.261883] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 77.261893] hda: status error: error=0x00 { }
- [ 77.261896] ide: failed opcode was: unknown
- [ 77.261900] hda: drive not ready for command
- [ 77.261954] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 77.261962] hda: status error: error=0x00 { }
- [ 77.261965] ide: failed opcode was: unknown
- [ 77.261969] hda: drive not ready for command
- [ 77.262014] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 77.262021] hda: status error: error=0x00 { }
- [ 77.262024] ide: failed opcode was: unknown
- [ 77.262028] hda: drive not ready for command
- [ 77.262073] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 77.262080] hda: status error: error=0x00 { }
- [ 77.262083] ide: failed opcode was: unknown
- [ 77.262087] hda: drive not ready for command
- [ 77.262126] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 77.262134] hda: status error: error=0x00 { }
- [ 77.262137] ide: failed opcode was: unknown
- [ 77.262141] hda: drive not ready for command
- [ 77.262181] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 77.262189] hda: status error: error=0x00 { }
- [ 77.262192] ide: failed opcode was: unknown
- [ 77.262196] hda: drive not ready for command
- [ 77.262235] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 77.262242] hda: status error: error=0x00 { }
- [ 77.262245] ide: failed opcode was: unknown
- [ 77.262249] hda: drive not ready for command
- [ 77.262288] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 77.262296] hda: status error: error=0x00 { }
- [ 77.262299] ide: failed opcode was: unknown
- [ 77.262302] hda: drive not ready for command
- [ 77.262342] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 77.262349] hda: status error: error=0x00 { }
- [ 77.262352] ide: failed opcode was: unknown
- [ 77.262356] hda: drive not ready for command
- [ 77.262395] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 77.262403] hda: status error: error=0x00 { }
- [ 77.262406] ide: failed opcode was: unknown
- [ 77.262409] hda: drive not ready for command
- [ 77.394124] Bluetooth: Core ver 2.11
- [ 77.395078] NET: Registered protocol family 31
- [ 77.395084] Bluetooth: HCI device and connection manager initialized
- [ 77.395090] Bluetooth: HCI socket layer initialized
- [ 77.486707] Bluetooth: L2CAP ver 2.9
- [ 77.486713] Bluetooth: L2CAP socket layer initialized
- [ 77.600874] Bluetooth: RFCOMM socket layer initialized
- [ 77.600894] Bluetooth: RFCOMM TTY layer initialized
- [ 77.600897] Bluetooth: RFCOMM ver 1.8
- [ 78.717395] NOHZ: local_softirq_pending 08
- [ 78.839388] NOHZ: local_softirq_pending 08
- [ 78.861751] NOHZ: local_softirq_pending 08
- [ 78.862332] NOHZ: local_softirq_pending 08
- [ 78.862902] NOHZ: local_softirq_pending 08
- [ 78.863466] NOHZ: local_softirq_pending 08
- [ 78.864028] NOHZ: local_softirq_pending 08
- [ 78.864590] NOHZ: local_softirq_pending 08
- [ 78.865152] NOHZ: local_softirq_pending 08
- [ 78.885889] NOHZ: local_softirq_pending 08
- [ 79.609397] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 17 (level, low) -> IRQ 22
- [ 80.110812] [fglrx] GART Table is not in FRAME_BUFFER range
- [ 80.110828] [fglrx] Reserve Block - 0 offset = 0X0 length = 0X40000
- [ 80.110834] [fglrx] Reserve Block - 1 offset = 0X3ff5000 length = 0Xb000
- [ 80.832181] [fglrx] interrupt source 20008000 successfully enabled
- [ 80.832191] [fglrx] enable ID = 0x00000004
- [ 80.832203] [fglrx] Receive enable interrupt message with irqEnableMask: 20008000
- [ 83.790358] wlan0: no IPv6 routers present
- [ 94.454850] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 94.454863] hda: status error: error=0x00 { }
- [ 94.454867] ide: failed opcode was: unknown
- [ 94.454872] hda: drive not ready for command
- [ 94.454926] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 94.454934] hda: status error: error=0x00 { }
- [ 94.454937] ide: failed opcode was: unknown
- [ 94.454941] hda: drive not ready for command
- [ 94.454982] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 94.454989] hda: status error: error=0x00 { }
- [ 94.454992] ide: failed opcode was: unknown
- [ 94.454996] hda: drive not ready for command
- [ 94.455036] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 94.455044] hda: status error: error=0x00 { }
- [ 94.455047] ide: failed opcode was: unknown
- [ 94.455050] hda: drive not ready for command
- [ 94.455107] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 94.455115] hda: status error: error=0x00 { }
- [ 94.455118] ide: failed opcode was: unknown
- [ 94.455121] hda: drive not ready for command
- [ 94.462805] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 94.462819] hda: status error: error=0x00 { }
- [ 94.462822] ide: failed opcode was: unknown
- [ 94.462828] hda: drive not ready for command
- [ 94.462906] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 94.462914] hda: status error: error=0x00 { }
- [ 94.462917] ide: failed opcode was: unknown
- [ 94.462921] hda: drive not ready for command
- [ 94.462982] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 94.462990] hda: status error: error=0x00 { }
- [ 94.462993] ide: failed opcode was: unknown
- [ 94.462996] hda: drive not ready for command
- [ 94.463139] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 94.463147] hda: status error: error=0x00 { }
- [ 94.463150] ide: failed opcode was: unknown
- [ 94.463153] hda: drive not ready for command
- [ 94.463196] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 94.463204] hda: status error: error=0x00 { }
- [ 94.463207] ide: failed opcode was: unknown
- [ 94.463211] hda: drive not ready for command
- [ 94.463253] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 94.463261] hda: status error: error=0x00 { }
- [ 94.463264] ide: failed opcode was: unknown
- [ 94.463267] hda: drive not ready for command
- [ 96.455428] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 96.455441] hda: status error: error=0x00 { }
- [ 96.455445] ide: failed opcode was: unknown
- [ 96.455450] hda: drive not ready for command
- [ 96.455497] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 96.455506] hda: status error: error=0x00 { }
- [ 96.455509] ide: failed opcode was: unknown
- [ 96.455512] hda: drive not ready for command
- [ 96.455553] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 96.455561] hda: status error: error=0x00 { }
- [ 96.455563] ide: failed opcode was: unknown
- [ 96.455567] hda: drive not ready for command
- [ 96.455618] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 96.455626] hda: status error: error=0x00 { }
- [ 96.455629] ide: failed opcode was: unknown
- [ 96.455632] hda: drive not ready for command
- [ 98.454245] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 98.454258] hda: status error: error=0x00 { }
- [ 98.454262] ide: failed opcode was: unknown
- [ 98.454268] hda: drive not ready for command
- [ 98.454321] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 98.454330] hda: status error: error=0x00 { }
- [ 98.454333] ide: failed opcode was: unknown
- [ 98.454337] hda: drive not ready for command
- [ 98.454379] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 98.454387] hda: status error: error=0x00 { }
- [ 98.454390] ide: failed opcode was: unknown
- [ 98.454394] hda: drive not ready for command
- [ 98.454461] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 98.454469] hda: status error: error=0x00 { }
- [ 98.454472] ide: failed opcode was: unknown
- [ 98.454475] hda: drive not ready for command
- [ 56.127343] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 56.127352] hda: status error: error=0x00 { }
- [ 56.127354] ide: failed opcode was: unknown
- [ 56.127357] hda: drive not ready for command
- [ 56.127400] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 56.127406] hda: status error: error=0x00 { }
- [ 56.127407] ide: failed opcode was: unknown
- [ 56.127409] hda: drive not ready for command
- [ 56.127447] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 56.127452] hda: status error: error=0x00 { }
- [ 56.127453] ide: failed opcode was: unknown
- [ 56.127455] hda: drive not ready for command
- [ 56.127499] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 56.127504] hda: status error: error=0x00 { }
- [ 56.127505] ide: failed opcode was: unknown
- [ 56.127507] hda: drive not ready for command
- [ 104.437514] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 104.437528] hda: status error: error=0x00 { }
- [ 104.437531] ide: failed opcode was: unknown
- [ 104.437536] hda: drive not ready for command
- [ 104.437585] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 104.437593] hda: status error: error=0x00 { }
- [ 104.437596] ide: failed opcode was: unknown
- [ 104.437600] hda: drive not ready for command
- [ 104.437642] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 104.437650] hda: status error: error=0x00 { }
- [ 104.437652] ide: failed opcode was: unknown
- [ 104.437656] hda: drive not ready for command
- [ 104.437706] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 104.437714] hda: status error: error=0x00 { }
- [ 104.437716] ide: failed opcode was: unknown
- [ 104.437720] hda: drive not ready for command
- [ 106.438035] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 106.438050] hda: status error: error=0x00 { }
- [ 106.438053] ide: failed opcode was: unknown
- [ 106.438058] hda: drive not ready for command
- [ 106.438108] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 106.438117] hda: status error: error=0x00 { }
- [ 106.438120] ide: failed opcode was: unknown
- [ 106.438123] hda: drive not ready for command
- [ 106.438164] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 106.438172] hda: status error: error=0x00 { }
- [ 106.438175] ide: failed opcode was: unknown
- [ 106.438178] hda: drive not ready for command
- [ 106.438229] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 106.438237] hda: status error: error=0x00 { }
- [ 106.438240] ide: failed opcode was: unknown
- [ 106.438243] hda: drive not ready for command
- [ 108.438591] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 108.438605] hda: status error: error=0x00 { }
- [ 108.438609] ide: failed opcode was: unknown
- [ 108.438614] hda: drive not ready for command
- [ 108.438664] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 108.438672] hda: status error: error=0x00 { }
- [ 108.438675] ide: failed opcode was: unknown
- [ 108.438679] hda: drive not ready for command
- [ 108.438720] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 108.438728] hda: status error: error=0x00 { }
- [ 108.438731] ide: failed opcode was: unknown
- [ 108.438734] hda: drive not ready for command
- [ 108.438784] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 108.438792] hda: status error: error=0x00 { }
- [ 108.438795] ide: failed opcode was: unknown
- [ 108.438798] hda: drive not ready for command
- [ 61.916461] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 61.916471] hda: status error: error=0x00 { }
- [ 61.916473] ide: failed opcode was: unknown
- [ 61.916477] hda: drive not ready for command
- [ 61.916522] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 61.916527] hda: status error: error=0x00 { }
- [ 61.916529] ide: failed opcode was: unknown
- [ 61.916531] hda: drive not ready for command
- [ 61.916568] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 61.916573] hda: status error: error=0x00 { }
- [ 61.916574] ide: failed opcode was: unknown
- [ 61.916576] hda: drive not ready for command
- [ 61.916625] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 61.916630] hda: status error: error=0x00 { }
- [ 61.916632] ide: failed opcode was: unknown
- [ 61.916634] hda: drive not ready for command
- [ 63.914582] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 63.914591] hda: status error: error=0x00 { }
- [ 63.914593] ide: failed opcode was: unknown
- [ 63.914597] hda: drive not ready for command
- [ 63.914642] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 63.914648] hda: status error: error=0x00 { }
- [ 63.914649] ide: failed opcode was: unknown
- [ 63.914651] hda: drive not ready for command
- [ 63.914689] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 63.914694] hda: status error: error=0x00 { }
- [ 63.914696] ide: failed opcode was: unknown
- [ 63.914697] hda: drive not ready for command
- [ 63.914748] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 63.914753] hda: status error: error=0x00 { }
- [ 63.914755] ide: failed opcode was: unknown
- [ 63.914757] hda: drive not ready for command
- [ 65.912684] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 65.912693] hda: status error: error=0x00 { }
- [ 65.912695] ide: failed opcode was: unknown
- [ 65.912699] hda: drive not ready for command
- [ 65.912745] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 65.912751] hda: status error: error=0x00 { }
- [ 65.912753] ide: failed opcode was: unknown
- [ 65.912755] hda: drive not ready for command
- [ 65.912793] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 65.912799] hda: status error: error=0x00 { }
- [ 65.912800] ide: failed opcode was: unknown
- [ 65.912802] hda: drive not ready for command
- [ 65.912854] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 65.912859] hda: status error: error=0x00 { }
- [ 65.912861] ide: failed opcode was: unknown
- [ 65.912863] hda: drive not ready for command
- [ 67.910758] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 67.910767] hda: status error: error=0x00 { }
- [ 67.910769] ide: failed opcode was: unknown
- [ 67.910772] hda: drive not ready for command
- [ 67.910817] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 67.910822] hda: status error: error=0x00 { }
- [ 67.910824] ide: failed opcode was: unknown
- [ 67.910826] hda: drive not ready for command
- [ 67.910863] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 67.910868] hda: status error: error=0x00 { }
- [ 67.910870] ide: failed opcode was: unknown
- [ 67.910872] hda: drive not ready for command
- [ 67.910917] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 67.910922] hda: status error: error=0x00 { }
- [ 67.910923] ide: failed opcode was: unknown
- [ 67.910925] hda: drive not ready for command
- [ 125.384369] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 125.384384] hda: status error: error=0x00 { }
- [ 125.384388] ide: failed opcode was: unknown
- [ 125.384393] hda: drive not ready for command
- [ 125.384441] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 125.384449] hda: status error: error=0x00 { }
- [ 125.384453] ide: failed opcode was: unknown
- [ 125.384456] hda: drive not ready for command
- [ 125.384497] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 125.384505] hda: status error: error=0x00 { }
- [ 125.384508] ide: failed opcode was: unknown
- [ 125.384512] hda: drive not ready for command
- [ 125.384560] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 125.384568] hda: status error: error=0x00 { }
- [ 125.384571] ide: failed opcode was: unknown
- [ 125.384575] hda: drive not ready for command
- [ 71.355344] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 71.355357] hda: status error: error=0x00 { }
- [ 71.355359] ide: failed opcode was: unknown
- [ 71.355364] hda: drive not ready for command
- [ 71.355415] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 71.355420] hda: status error: error=0x00 { }
- [ 71.355422] ide: failed opcode was: unknown
- [ 71.355424] hda: drive not ready for command
- [ 71.355461] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 71.355467] hda: status error: error=0x00 { }
- [ 71.355468] ide: failed opcode was: unknown
- [ 71.355470] hda: drive not ready for command
- [ 71.355523] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 71.355528] hda: status error: error=0x00 { }
- [ 71.355530] ide: failed opcode was: unknown
- [ 71.355532] hda: drive not ready for command
- [ 73.353423] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 73.353431] hda: status error: error=0x00 { }
- [ 73.353433] ide: failed opcode was: unknown
- [ 73.353436] hda: drive not ready for command
- [ 73.353480] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 73.353485] hda: status error: error=0x00 { }
- [ 73.353487] ide: failed opcode was: unknown
- [ 73.353489] hda: drive not ready for command
- [ 73.353526] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 73.353531] hda: status error: error=0x00 { }
- [ 73.353532] ide: failed opcode was: unknown
- [ 73.353534] hda: drive not ready for command
- [ 73.353576] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 73.353581] hda: status error: error=0x00 { }
- [ 73.353583] ide: failed opcode was: unknown
- [ 73.353585] hda: drive not ready for command
- [ 75.351533] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 75.351543] hda: status error: error=0x00 { }
- [ 75.351545] ide: failed opcode was: unknown
- [ 75.351548] hda: drive not ready for command
- [ 75.351591] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 75.351596] hda: status error: error=0x00 { }
- [ 75.351598] ide: failed opcode was: unknown
- [ 75.351600] hda: drive not ready for command
- [ 75.351637] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 75.351643] hda: status error: error=0x00 { }
- [ 75.351644] ide: failed opcode was: unknown
- [ 75.351646] hda: drive not ready for command
- [ 75.351690] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 75.351695] hda: status error: error=0x00 { }
- [ 75.351697] ide: failed opcode was: unknown
- [ 75.351699] hda: drive not ready for command
- [ 138.345419] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 138.345433] hda: status error: error=0x00 { }
- [ 138.345436] ide: failed opcode was: unknown
- [ 138.345441] hda: drive not ready for command
- [ 138.345492] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 138.345500] hda: status error: error=0x00 { }
- [ 138.345503] ide: failed opcode was: unknown
- [ 138.345507] hda: drive not ready for command
- [ 138.345547] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 138.345555] hda: status error: error=0x00 { }
- [ 138.345558] ide: failed opcode was: unknown
- [ 138.345562] hda: drive not ready for command
- [ 138.345615] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 138.345622] hda: status error: error=0x00 { }
- [ 138.345625] ide: failed opcode was: unknown
- [ 138.345629] hda: drive not ready for command
- [ 78.243757] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 78.243766] hda: status error: error=0x00 { }
- [ 78.243768] ide: failed opcode was: unknown
- [ 78.243771] hda: drive not ready for command
- [ 78.243815] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 78.243821] hda: status error: error=0x00 { }
- [ 78.243822] ide: failed opcode was: unknown
- [ 78.243824] hda: drive not ready for command
- [ 78.243920] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 78.243925] hda: status error: error=0x00 { }
- [ 78.243927] ide: failed opcode was: unknown
- [ 78.243929] hda: drive not ready for command
- [ 78.243972] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 78.243977] hda: status error: error=0x00 { }
- [ 78.243979] ide: failed opcode was: unknown
- [ 78.243981] hda: drive not ready for command
- [ 80.251473] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 80.251482] hda: status error: error=0x00 { }
- [ 80.251484] ide: failed opcode was: unknown
- [ 80.251513] hda: drive not ready for command
- [ 80.251582] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 80.251587] hda: status error: error=0x00 { }
- [ 80.251589] ide: failed opcode was: unknown
- [ 80.251591] hda: drive not ready for command
- [ 80.251628] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 80.251633] hda: status error: error=0x00 { }
- [ 80.251635] ide: failed opcode was: unknown
- [ 80.251637] hda: drive not ready for command
- [ 80.251679] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 80.251684] hda: status error: error=0x00 { }
- [ 80.251685] ide: failed opcode was: unknown
- [ 80.251687] hda: drive not ready for command
- [ 82.239971] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 82.239980] hda: status error: error=0x00 { }
- [ 82.239982] ide: failed opcode was: unknown
- [ 82.239986] hda: drive not ready for command
- [ 82.240030] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 82.240035] hda: status error: error=0x00 { }
- [ 82.240037] ide: failed opcode was: unknown
- [ 82.240039] hda: drive not ready for command
- [ 82.240076] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 82.240081] hda: status error: error=0x00 { }
- [ 82.240083] ide: failed opcode was: unknown
- [ 82.240085] hda: drive not ready for command
- [ 82.240130] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 82.240135] hda: status error: error=0x00 { }
- [ 82.240137] ide: failed opcode was: unknown
- [ 82.240139] hda: drive not ready for command
- [ 84.238059] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 84.238068] hda: status error: error=0x00 { }
- [ 84.238070] ide: failed opcode was: unknown
- [ 84.238074] hda: drive not ready for command
- [ 84.238118] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 84.238123] hda: status error: error=0x00 { }
- [ 84.238125] ide: failed opcode was: unknown
- [ 84.238127] hda: drive not ready for command
- [ 84.238164] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 84.238169] hda: status error: error=0x00 { }
- [ 84.238171] ide: failed opcode was: unknown
- [ 84.238173] hda: drive not ready for command
- [ 84.238222] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 84.238227] hda: status error: error=0x00 { }
- [ 84.238228] ide: failed opcode was: unknown
- [ 84.238230] hda: drive not ready for command
- [ 86.236138] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 86.236148] hda: status error: error=0x00 { }
- [ 86.236150] ide: failed opcode was: unknown
- [ 86.236154] hda: drive not ready for command
- [ 86.236196] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 86.236201] hda: status error: error=0x00 { }
- [ 86.236203] ide: failed opcode was: unknown
- [ 86.236205] hda: drive not ready for command
- [ 86.236241] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 86.236246] hda: status error: error=0x00 { }
- [ 86.236248] ide: failed opcode was: unknown
- [ 86.236250] hda: drive not ready for command
- [ 86.236297] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 86.236301] hda: status error: error=0x00 { }
- [ 86.236303] ide: failed opcode was: unknown
- [ 86.236305] hda: drive not ready for command
- [ 88.234216] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 88.234226] hda: status error: error=0x00 { }
- [ 88.234228] ide: failed opcode was: unknown
- [ 88.234231] hda: drive not ready for command
- [ 88.234277] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 88.234283] hda: status error: error=0x00 { }
- [ 88.234285] ide: failed opcode was: unknown
- [ 88.234287] hda: drive not ready for command
- [ 88.234326] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 88.234332] hda: status error: error=0x00 { }
- [ 88.234333] ide: failed opcode was: unknown
- [ 88.234335] hda: drive not ready for command
- [ 88.234390] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 88.234396] hda: status error: error=0x00 { }
- [ 88.234398] ide: failed opcode was: unknown
- [ 88.234399] hda: drive not ready for command
- [ 90.232283] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 90.232294] hda: status error: error=0x00 { }
- [ 90.232296] ide: failed opcode was: unknown
- [ 90.232299] hda: drive not ready for command
- [ 90.232345] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 90.232351] hda: status error: error=0x00 { }
- [ 90.232352] ide: failed opcode was: unknown
- [ 90.232354] hda: drive not ready for command
- [ 90.232391] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 90.232396] hda: status error: error=0x00 { }
- [ 90.232398] ide: failed opcode was: unknown
- [ 90.232400] hda: drive not ready for command
- [ 90.232449] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 90.232454] hda: status error: error=0x00 { }
- [ 90.232456] ide: failed opcode was: unknown
- [ 90.232458] hda: drive not ready for command
- [ 92.230361] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 92.230371] hda: status error: error=0x00 { }
- [ 92.230373] ide: failed opcode was: unknown
- [ 92.230377] hda: drive not ready for command
- [ 92.230421] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 92.230426] hda: status error: error=0x00 { }
- [ 92.230428] ide: failed opcode was: unknown
- [ 92.230430] hda: drive not ready for command
- [ 92.230467] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 92.230472] hda: status error: error=0x00 { }
- [ 92.230474] ide: failed opcode was: unknown
- [ 92.230476] hda: drive not ready for command
- [ 92.230524] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 92.230529] hda: status error: error=0x00 { }
- [ 92.230530] ide: failed opcode was: unknown
- [ 92.230532] hda: drive not ready for command
- [ 94.228581] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 94.228593] hda: status error: error=0x00 { }
- [ 94.228595] ide: failed opcode was: unknown
- [ 94.228599] hda: drive not ready for command
- [ 94.228648] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 94.228653] hda: status error: error=0x00 { }
- [ 94.228655] ide: failed opcode was: unknown
- [ 94.228657] hda: drive not ready for command
- [ 94.228695] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 94.228700] hda: status error: error=0x00 { }
- [ 94.228702] ide: failed opcode was: unknown
- [ 94.228704] hda: drive not ready for command
- [ 94.228762] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 94.228767] hda: status error: error=0x00 { }
- [ 94.228768] ide: failed opcode was: unknown
- [ 94.228770] hda: drive not ready for command
- [ 96.226532] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 96.226541] hda: status error: error=0x00 { }
- [ 96.226543] ide: failed opcode was: unknown
- [ 96.226546] hda: drive not ready for command
- [ 96.226591] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 96.226597] hda: status error: error=0x00 { }
- [ 96.226598] ide: failed opcode was: unknown
- [ 96.226600] hda: drive not ready for command
- [ 96.226641] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 96.226646] hda: status error: error=0x00 { }
- [ 96.226647] ide: failed opcode was: unknown
- [ 96.226649] hda: drive not ready for command
- [ 96.226696] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 96.226701] hda: status error: error=0x00 { }
- [ 96.226703] ide: failed opcode was: unknown
- [ 96.226705] hda: drive not ready for command
- [ 98.224576] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 98.224585] hda: status error: error=0x00 { }
- [ 98.224587] ide: failed opcode was: unknown
- [ 98.224590] hda: drive not ready for command
- [ 98.224634] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 98.224640] hda: status error: error=0x00 { }
- [ 98.224642] ide: failed opcode was: unknown
- [ 98.224644] hda: drive not ready for command
- [ 98.224680] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 98.224686] hda: status error: error=0x00 { }
- [ 98.224687] ide: failed opcode was: unknown
- [ 98.224689] hda: drive not ready for command
- [ 98.224732] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 98.224737] hda: status error: error=0x00 { }
- [ 98.224739] ide: failed opcode was: unknown
- [ 98.224741] hda: drive not ready for command
- [ 100.222681] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 100.222690] hda: status error: error=0x00 { }
- [ 100.222692] ide: failed opcode was: unknown
- [ 100.222695] hda: drive not ready for command
- [ 100.222739] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 100.222744] hda: status error: error=0x00 { }
- [ 100.222745] ide: failed opcode was: unknown
- [ 100.222747] hda: drive not ready for command
- [ 100.222784] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 100.222789] hda: status error: error=0x00 { }
- [ 100.222791] ide: failed opcode was: unknown
- [ 100.222793] hda: drive not ready for command
- [ 100.222835] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 100.222840] hda: status error: error=0x00 { }
- [ 100.222841] ide: failed opcode was: unknown
- [ 100.222843] hda: drive not ready for command
- [ 101.669090] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 101.669099] hda: status error: error=0x00 { }
- [ 101.669101] ide: failed opcode was: unknown
- [ 101.669105] hda: drive not ready for command
- [ 101.669149] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 101.669154] hda: status error: error=0x00 { }
- [ 101.669156] ide: failed opcode was: unknown
- [ 101.669158] hda: drive not ready for command
- [ 101.669194] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 101.669200] hda: status error: error=0x00 { }
- [ 101.669201] ide: failed opcode was: unknown
- [ 101.669203] hda: drive not ready for command
- [ 101.669251] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 101.669257] hda: status error: error=0x00 { }
- [ 101.669258] ide: failed opcode was: unknown
- [ 101.669260] hda: drive not ready for command
- [ 103.668167] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 103.668176] hda: status error: error=0x00 { }
- [ 103.668178] ide: failed opcode was: unknown
- [ 103.668181] hda: drive not ready for command
- [ 103.668224] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 103.668230] hda: status error: error=0x00 { }
- [ 103.668232] ide: failed opcode was: unknown
- [ 103.668234] hda: drive not ready for command
- [ 103.668271] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 103.668276] hda: status error: error=0x00 { }
- [ 103.668278] ide: failed opcode was: unknown
- [ 103.668280] hda: drive not ready for command
- [ 103.668324] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 103.668329] hda: status error: error=0x00 { }
- [ 103.668330] ide: failed opcode was: unknown
- [ 103.668332] hda: drive not ready for command
- [ 105.665247] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 105.665257] hda: status error: error=0x00 { }
- [ 105.665259] ide: failed opcode was: unknown
- [ 105.665262] hda: drive not ready for command
- [ 105.665307] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 105.665312] hda: status error: error=0x00 { }
- [ 105.665314] ide: failed opcode was: unknown
- [ 105.665316] hda: drive not ready for command
- [ 105.665353] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 105.665358] hda: status error: error=0x00 { }
- [ 105.665359] ide: failed opcode was: unknown
- [ 105.665361] hda: drive not ready for command
- [ 105.665408] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 105.665413] hda: status error: error=0x00 { }
- [ 105.665415] ide: failed opcode was: unknown
- [ 105.665417] hda: drive not ready for command
- [ 107.663344] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 107.663353] hda: status error: error=0x00 { }
- [ 107.663355] ide: failed opcode was: unknown
- [ 107.663359] hda: drive not ready for command
- [ 107.663403] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 107.663409] hda: status error: error=0x00 { }
- [ 107.663410] ide: failed opcode was: unknown
- [ 107.663412] hda: drive not ready for command
- [ 107.663448] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 107.663453] hda: status error: error=0x00 { }
- [ 107.663455] ide: failed opcode was: unknown
- [ 107.663457] hda: drive not ready for command
- [ 107.663506] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 107.663511] hda: status error: error=0x00 { }
- [ 107.663512] ide: failed opcode was: unknown
- [ 107.663514] hda: drive not ready for command
- [ 109.661413] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 109.661423] hda: status error: error=0x00 { }
- [ 109.661425] ide: failed opcode was: unknown
- [ 109.661429] hda: drive not ready for command
- [ 109.661474] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 109.661479] hda: status error: error=0x00 { }
- [ 109.661481] ide: failed opcode was: unknown
- [ 109.661483] hda: drive not ready for command
- [ 109.661520] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 109.661525] hda: status error: error=0x00 { }
- [ 109.661527] ide: failed opcode was: unknown
- [ 109.661529] hda: drive not ready for command
- [ 109.661589] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 109.661594] hda: status error: error=0x00 { }
- [ 109.661596] ide: failed opcode was: unknown
- [ 109.661598] hda: drive not ready for command
- [ 111.659522] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 111.659532] hda: status error: error=0x00 { }
- [ 111.659534] ide: failed opcode was: unknown
- [ 111.659537] hda: drive not ready for command
- [ 111.659581] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 111.659587] hda: status error: error=0x00 { }
- [ 111.659588] ide: failed opcode was: unknown
- [ 111.659590] hda: drive not ready for command
- [ 111.659627] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 111.659633] hda: status error: error=0x00 { }
- [ 111.659634] ide: failed opcode was: unknown
- [ 111.659636] hda: drive not ready for command
- [ 111.659693] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 111.659698] hda: status error: error=0x00 { }
- [ 111.659700] ide: failed opcode was: unknown
- [ 111.659702] hda: drive not ready for command
- [ 204.150478] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 204.150493] hda: status error: error=0x00 { }
- [ 204.150497] ide: failed opcode was: unknown
- [ 204.150502] hda: drive not ready for command
- [ 204.150552] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 204.150562] hda: status error: error=0x00 { }
- [ 204.150564] ide: failed opcode was: unknown
- [ 204.150568] hda: drive not ready for command
- [ 204.150609] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 204.150617] hda: status error: error=0x00 { }
- [ 204.150620] ide: failed opcode was: unknown
- [ 204.150623] hda: drive not ready for command
- [ 204.150683] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 204.150691] hda: status error: error=0x00 { }
- [ 204.150694] ide: failed opcode was: unknown
- [ 204.150697] hda: drive not ready for command
- [ 204.381144] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 204.381160] hda: status error: error=0x00 { }
- [ 204.381164] ide: failed opcode was: unknown
- [ 204.381169] hda: drive not ready for command
- [ 204.382491] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 204.382502] hda: status error: error=0x00 { }
- [ 204.382505] ide: failed opcode was: unknown
- [ 204.382509] hda: drive not ready for command
- [ 204.383262] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 204.383271] hda: status error: error=0x00 { }
- [ 204.383274] ide: failed opcode was: unknown
- [ 204.383278] hda: drive not ready for command
- [ 204.384060] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 204.384070] hda: status error: error=0x00 { }
- [ 204.384073] ide: failed opcode was: unknown
- [ 204.384077] hda: drive not ready for command
- [ 113.867189] hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
- [ 113.867199] hda: status error: error=0x00 { }
- [ 113.867201] ide: failed opcode was: unknown
- [ 113.867204] hda: drive not ready for command
- [ 113.867266] hda: DMA disabled
- [ 113.913579] hda: ATAPI reset complete
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement