Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Connected to (snip servername)
- Escape character is '^]'.
- rq 9 high level)
- ACPI: IRQ0 used by override.
- ACPI: IRQ2 used by override.
- ACPI: IRQ9 used by override.
- Enabling APIC mode: Flat. Using 3 I/O APICs
- ACPI: HPET id: 0x8086a201 base: 0xfed00000
- Using ACPI (MADT) for SMP configuration information
- Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
- Built 1 zonelists. Total pages: 1040384
- Kernel command line: initrd=/i386/standard/initrd.img root=/dev/ram ramdisk_blocksize=1024 ramdisk_size=80000 MONITOR_SERVER=10.200.1.5 MONITOR_CONSOLE=yes console=ttyS0,19200 BOOT_IMAGE=/i386/standard/kernel
- mapped APIC to ffffd000 (fee00000)
- mapped IOAPIC to ffffc000 (fec00000)
- mapped IOAPIC to ffffb000 (fec84000)
- mapped IOAPIC to ffffa000 (fec84800)
- Enabling fast FPU save and restore... done.
- Enabling unmasked SIMD FPU exception support... done.
- Initializing CPU#0
- PID hash table entries: 4096 (order: 12, 16384 bytes)
- Detected 2327.533 MHz processor.
- Console: colour VGA+ 80x25
- Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- Memory: 3095120k/4194304k available (3013k kernel code, 44604k reserved, 1115k data, 364k init, 2223424k highmem)
- virtual kernel memory layout:
- fixmap : 0xfffa9000 - 0xfffff000 ( 344 kB)
- pkmap : 0xff800000 - 0xffc00000 (4096 kB)
- vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
- lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
- .init : 0xc050c000 - 0xc0567000 ( 364 kB)
- .data : 0xc03f17f8 - 0xc05086f4 (1115 kB)
- .text : 0xc0100000 - 0xc03f17f8 (3013 kB)
- Checking if this processor honours the WP bit even in supervisor mode... Ok.
- Calibrating delay using timer specific routine.. 4658.14 BogoMIPS (lpj=9316284)
- Mount-cache hash table entries: 512
- CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 000ce3bd 00000000 00000001
- monitor/mwait feature present.
- using mwait in idle threads.
- CPU: L1 I cache: 32K, L1 D cache: 32K
- CPU: L2 cache: 6144K
- CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 000ce3bd 00000000 00000001
- Compat vDSO mapped to ffffe000.
- CPU: Intel(R) Xeon(R) CPU E5410 @ 2.33GHz stepping 06
- Checking 'hlt' instruction... OK.
- ACPI: Core revision 20070126
- ENABLING IO-APIC IRQs
- ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
- NET: Registered protocol family 16
- ACPI: bus type pci registered
- PCI: Using MMCONFIG
- Setting up standard PCI resources
- ACPI: Interpreter enabled
- ACPI: Using IOAPIC for interrupt routing
- ACPI: PCI Root Bridge [PCI0] (0000:00)
- PCI: Dell PowerEdge 2950 detected, enabling pci=bfsort.
- PCI: Probing PCI hardware (bus 00)
- PCI: PXH quirk detected, disabling MSI for SHPC device
- PCI: PXH quirk detected, disabling MSI for SHPC device
- Boot video device is 0000:10:0d.0
- PCI: Transparent bridge - 0000:00:1e.0
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST.DWN1._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST.DWN2._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3.PE2P._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6.PXHA._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6.PXHB._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBEX._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT]
- ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 *5 6 7 10 11 12)
- ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
- ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
- ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 10 *11 12)
- ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 5 6 7 *10 11 12)
- ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 *11 12)
- ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
- ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
- Linux Plug and Play Support v0.97 (c) Adam Belay
- pnp: PnP ACPI init
- pnp: PnP ACPI: found 12 devices
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- PCI: Using ACPI for IRQ routing
- PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
- pnp: 00:08: ioport range 0x800-0x87f has been reserved
- Time: tsc clocksource has been installed.
- pnp: 00:08: ioport range 0x880-0x8bf has been reserved
- pnp: 00:08: ioport range 0x8c0-0x8df has been reserved
- pnp: 00:08: ioport range 0x8e0-0x8e3 has been reserved
- pnp: 00:08: ioport range 0x900-0x900 has been reserved
- pnp: 00:08: ioport range 0xc00-0xc7f has been reserved
- pnp: 00:08: ioport range 0xca0-0xca7 has been reserved
- pnp: 00:08: ioport range 0xca9-0xcab has been reserved
- pnp: 00:09: ioport range 0xca8-0xca8 has been reserved
- pnp: 00:09: ioport range 0xcac-0xcac has been reserved
- pnp: 00:0a: iomem range 0xe0000000-0xefffffff could not be reserved
- PCI: Bridge: 0000:06:00.0
- IO window: disabled.
- MEM window: f4000000-f7ffffff
- PREFETCH window: disabled.
- PCI: Bridge: 0000:05:00.0
- IO window: disabled.
- MEM window: f4000000-f7ffffff
- PREFETCH window: disabled.
- PCI: Bridge: 0000:05:01.0
- IO window: disabled.
- MEM window: disabled.
- PREFETCH window: disabled.
- PCI: Bridge: 0000:04:00.0
- IO window: disabled.
- MEM window: f4000000-f7ffffff
- PREFETCH window: disabled.
- PCI: Bridge: 0000:04:00.3
- IO window: disabled.
- MEM window: disabled.
- PREFETCH window: disabled.
- PCI: Bridge: 0000:00:02.0
- IO window: disabled.
- MEM window: f2000000-f7ffffff
- PREFETCH window: disabled.
- PCI: Bridge: 0000:00:03.0
- IO window: e000-efff
- MEM window: fc400000-fc5fffff
- PREFETCH window: disabled.
- PCI: Bridge: 0000:00:04.0
- IO window: disabled.
- MEM window: disabled.
- PREFETCH window: disabled.
- PCI: Bridge: 0000:00:05.0
- IO window: disabled.
- MEM window: disabled.
- PREFETCH window: disabled.
- PCI: Bridge: 0000:0c:00.0
- IO window: disabled.
- MEM window: disabled.
- PREFETCH window: disabled.
- PCI: Bridge: 0000:0c:00.2
- IO window: disabled.
- MEM window: disabled.
- PREFETCH window: disabled.
- PCI: Bridge: 0000:00:06.0
- IO window: disabled.
- MEM window: fc300000-fc3fffff
- PREFETCH window: disabled.
- PCI: Bridge: 0000:00:07.0
- IO window: disabled.
- MEM window: disabled.
- PREFETCH window: disabled.
- PCI: Bridge: 0000:02:00.0
- IO window: disabled.
- MEM window: f8000000-fbffffff
- PREFETCH window: disabled.
- PCI: Bridge: 0000:00:1c.0
- IO window: disabled.
- MEM window: f8000000-fbffffff
- PREFETCH window: disabled.
- PCI: Bridge: 0000:00:1e.0
- IO window: d000-dfff
- MEM window: fc100000-fc2fffff
- PREFETCH window: d8000000-dfffffff
- ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
- PCI: Setting latency timer of device 0000:00:02.0 to 64
- ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 16
- PCI: Setting latency timer of device 0000:04:00.0 to 64
- ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 16
- PCI: Setting latency timer of device 0000:05:00.0 to 64
- PCI: Setting latency timer of device 0000:06:00.0 to 64
- ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 16 (level, low) -> IRQ 16
- PCI: Setting latency timer of device 0000:05:01.0 to 64
- PCI: Setting latency timer of device 0000:04:00.3 to 64
- ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 16
- PCI: Setting latency timer of device 0000:00:03.0 to 64
- ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16
- PCI: Setting latency timer of device 0000:00:04.0 to 64
- PCI: Setting latency timer of device 0000:00:05.0 to 64
- ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 16
- PCI: Setting latency timer of device 0000:00:06.0 to 64
- PCI: Setting latency timer of device 0000:0c:00.0 to 64
- PCI: Setting latency timer of device 0000:0c:00.2 to 64
- PCI: Setting latency timer of device 0000:00:07.0 to 64
- ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
- PCI: Setting latency timer of device 0000:00:1c.0 to 64
- PCI: Setting latency timer of device 0000:02:00.0 to 64
- PCI: Setting latency timer of device 0000:00:1e.0 to 64
- NET: Registered protocol family 2
- IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
- TCP: Hash tables configured (established 131072 bind 65536)
- TCP reno registered
- checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
- Freeing initrd memory: 6228k freed
- apm: BIOS not found.
- highmem bounce pool size: 64 pages
- io scheduler noop registered
- io scheduler deadline registered (default)
- PCI: Setting latency timer of device 0000:00:02.0 to 64
- assign_interrupt_mode Found MSI capability
- Allocate Port Service[0000:00:02.0:pcie00]
- Allocate Port Service[0000:00:02.0:pcie01]
- PCI: Setting latency timer of device 0000:00:03.0 to 64
- assign_interrupt_mode Found MSI capability
- Allocate Port Service[0000:00:03.0:pcie00]
- Allocate Port Service[0000:00:03.0:pcie01]
- PCI: Setting latency timer of device 0000:00:04.0 to 64
- assign_interrupt_mode Found MSI capability
- Allocate Port Service[0000:00:04.0:pcie00]
- Allocate Port Service[0000:00:04.0:pcie01]
- PCI: Setting latency timer of device 0000:00:05.0 to 64
- assign_interrupt_mode Found MSI capability
- Allocate Port Service[0000:00:05.0:pcie00]
- Allocate Port Service[0000:00:05.0:pcie01]
- PCI: Setting latency timer of device 0000:00:06.0 to 64
- assign_interrupt_mode Found MSI capability
- Allocate Port Service[0000:00:06.0:pcie00]
- Allocate Port Service[0000:00:06.0:pcie01]
- PCI: Setting latency timer of device 0000:00:07.0 to 64
- assign_interrupt_mode Found MSI capability
- Allocate Port Service[0000:00:07.0:pcie00]
- Allocate Port Service[0000:00:07.0:pcie01]
- PCI: Setting latency timer of device 0000:00:1c.0 to 64
- assign_interrupt_mode Found MSI capability
- Allocate Port Service[0000:00:1c.0:pcie00]
- Allocate Port Service[0000:00:1c.0:pcie03]
- PCI: Setting latency timer of device 0000:04:00.0 to 64
- Allocate Port Service[0000:04:00.0:pcie10]
- Allocate Port Service[0000:04:00.0:pcie11]
- PCI: Setting latency timer of device 0000:05:00.0 to 64
- assign_interrupt_mode Found MSI capability
- Allocate Port Service[0000:05:00.0:pcie20]
- Allocate Port Service[0000:05:00.0:pcie21]
- PCI: Setting latency timer of device 0000:05:01.0 to 64
- assign_interrupt_mode Found MSI capability
- Allocate Port Service[0000:05:01.0:pcie20]
- Allocate Port Service[0000:05:01.0:pcie21]
- Evaluate _OSC Set fails. Status = 0x0005
- aer_init: AER service init fails - Run ACPI _OSC fails
- aer: probe of 0000:00:02.0:pcie01 failed with error 2
- Evaluate _OSC Set fails. Status = 0x0005
- aer_init: AER service init fails - Run ACPI _OSC fails
- aer: probe of 0000:00:03.0:pcie01 failed with error 2
- Evaluate _OSC Set fails. Status = 0x0005
- aer_init: AER service init fails - Run ACPI _OSC fails
- aer: probe of 0000:00:04.0:pcie01 failed with error 2
- aer_init: AER service init fails - No ACPI _OSC support
- aer: probe of 0000:00:05.0:pcie01 failed with error 1
- Evaluate _OSC Set fails. Status = 0x0005
- aer_init: AER service init fails - Run ACPI _OSC fails
- aer: probe of 0000:00:06.0:pcie01 failed with error 2
- aer_init: AER service init fails - No ACPI _OSC support
- aer: probe of 0000:00:07.0:pcie01 failed with error 1
- input: Power Button (FF) as /class/input/input0
- ACPI: Power Button (FF) [PWRF]
- Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
- serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
- 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
- floppy0: no floppy controllers found
- RAMDISK driver initialized: 16 RAM disks of 80000K size 1024 blocksize
- loop: loaded (max 8 devices)
- Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
- Copyright (c) 1999-2006 Intel Corporation.
- Intel(R) PRO/10GbE Network Driver - version 1.0.126-k2
- Copyright (c) 1999-2006 Intel Corporation.
- dgrs: SW=$Id: dgrs.c,v 1.13 2000/06/06 04:07:00 rick Exp $ FW=Build 550 11/16/96 03:45:15
- FW Version=$Version$
- pcnet32.c:v1.33 27.Jun.2006 [email protected]
- e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
- e100: Copyright(c) 1999-2006 Intel Corporation
- ThunderLAN driver v1.15
- TLAN: 0 devices installed, PCI: 0 EISA: 0
- ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
- Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.5.8 (April 24, 2007)
- ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
- eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 16, node addr 001ec940d055
- ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 16 (level, low) -> IRQ 16
- eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f4000000, IRQ 16, node addr 001ec940d057
- sk98lin: driver has been replaced by the skge driver and is scheduled for removal
- cs89x0:cs89x0_probe(0x0)
- PP_addr at 300[a]: 0xffff
- eth2: incorrect signature at 300[c]: 0xffff!=0x630E
- PP_addr at 320[a]: 0xffff
- eth2: incorrect signature at 320[c]: 0xffff!=0x630E
- PP_addr at 340[a]: 0xffff
- eth2: incorrect signature at 340[c]: 0xffff!=0x630E
- PP_addr at 360[a]: 0xffff
- eth2: incorrect signature at 360[c]: 0xffff!=0x630E
- PP_addr at 200[a]: 0xffff
- eth2: incorrect signature at 200[c]: 0xffff!=0x630E
- PP_addr at 220[a]: 0xffff
- eth2: incorrect signature at 220[c]: 0xffff!=0x630E
- PP_addr at 240[a]: 0xffff
- eth2: incorrect signature at 240[c]: 0xffff!=0x630E
- PP_addr at 260[a]: 0xffff
- eth2: incorrect signature at 260[c]: 0xffff!=0x630E
- PP_addr at 280[a]: 0xffff
- eth2: incorrect signature at 280[c]: 0xffff!=0x630E
- PP_addr at 2a0[a]: 0xffff
- eth2: incorrect signature at 2a0[c]: 0xffff!=0x630E
- PP_addr at 2c0[a]: 0xffff
- eth2: incorrect signature at 2c0[c]: 0xffff!=0x630E
- PP_addr at 2e0[a]: 0xffff
- eth2: incorrect signature at 2e0[c]: 0xffff!=0x630E
- cs89x0: no cs8900 or cs8920 detected. Be sure to disable PnP with SETUP
- Trying to free nonexistent resource <0000000000000000-0000000000000010>
- forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
- depca: probe of depca.0 failed with error -16
- eth%d: i82596 initialization timed out
- myri10ge: Version 1.3.0-1.233
- dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
- winbond-840.c:v1.01-e (2.4 port) Sep-11-2006 Donald Becker <[email protected]>
- http://www.scyld.com/network/drivers.html
- uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
- Intel ISA PCIC probe: not found.
- Databook TCIC-2 PCMCIA probe: not found.
- usbcore: registered new interface driver usbhid
- drivers/usb/input/hid-core.c: v2.6:USB HID core driver
- usbcore: registered new interface driver kaweth
- pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
- usbcore: registered new interface driver pegasus
- PNP: No PS/2 controller found. Probing ports directly.
- serio: i8042 KBD port at 0x60,0x64 irq 1
- serio: i8042 AUX port at 0x60,0x64 irq 12
- TCP cubic registered
- NET: Registered protocol family 1
- NET: Registered protocol family 17
- NET: Registered protocol family 15
- Using IPI Shortcut mode
- RAMDISK: Compressed image found at block 0
- VFS: Mounted root (cramfs filesystem) readonly.
- Freeing unused kernel memory: 364k freed
- monitor_save_dmesg
- mount_sys
- mount_pts
- get_arch
- adjust_arch
- ifconfig_loopback
- load_my_modules
- start_udevd
- bin dev etc init lib linuxrc my_modules old_root proc root sbin sys tmp usr var Starting kernel event manager...
- ...done.
- bin dev etc init lib linuxrc my_modules old_root proc root sbin sys tmp usr var Loading hardware drivers...
- ...done.
- start_hotplug
- bin dev etc init lib linuxrc my_modules old_root proc root sbin sys tmp usr var Starting hotplug subsystem...
- ...done.
- variableize_kernel_append_parameters
- read_kernel_append_parameters
- read_local_cfg
- Checking for floppy diskette.
- YOU MAY SEE SOME "wrong magic" ERRORS HERE, AND THAT IS NORMAL.
- No floppy diskette in drive.
- read_kernel_append_parameters
- start_network
- IP Address not set with pre-boot settings.
- sleep 0: This is to give your switch (if you're using one) time to
- recognize your ethernet card before we try the network.
- Tip: You can use <ctrl>+<c> to pass the time (pun intended).
- dhclient
- Internet Software Consortium DHCP Client 2.0pl5
- Copyright 1995, 1996, 1997, 1998, 1999 The Internet Software Consortium.
- All rights reserved.
- Please contribute if you find this software useful.
- For info, please visit http://www.isc.org/dhcp-contrib.html
- Listening on LPF/lo/<null>
- Sending on LPF/lo/<null>
- Listening on LPF/eth1/00:1e:c9:40:d0:57
- Sending on LPF/eth1/00:1e:c9:40:d0:57
- Listening on LPF/eth0/00:1e:c9:40:d0:55
- Sending on LPF/eth0/00:1e:c9:40:d0:55
- Sending on Socket/fallback/fallback-net
- DHCPDISCOVER on lo to 255.255.255.255 port 67 interval 8
- DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 7
- DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5
- DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10
- DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 13
- DHCPDISCOVER on lo to 255.255.255.255 port 67 interval 11
- DHCPOFFER from 10.200.1.5
- DHCPREQUEST on eth0 to 255.255.255.255 port 67
- DHCPACK from 10.200.1.5
- Using option-140 as IMAGESERVER: 10.200.1.5
- bound to 10.200.10.15 -- renewal in 43200 seconds.
- Overriding any DHCP settings with pre-boot settings from kernel append
- parameters.
- read_kernel_append_parameters
- ping_test
- Pinging your SystemImager server to ensure we have network connectivity.
- PING ATTEMPT 1:
- PING 10.200.1.5 (10.200.1.5): 56 data bytes
- 84 bytes from 10.200.1.5: icmp_seq=0 ttl=64 time=2.0 ms
- --- 10.200.1.5 ping statistics ---
- 1 packets transmitted, 1 packets received, 0% packet loss
- round-trip min/avg/max = 2.0/2.0/2.0 ms
- We have connectivity to your SystemImager server!
- Monitoring initialized.
- start_syslogd
- Starting syslogd...
- Successfully started syslogd!
- get_boel_binaries_tarball
- rsync -av 10.200.1.5::boot/i386/standard/boel_binaries.tar.gz /tmp/boel_binaries
- receiving file list ... done
- boel_binaries.tar.gz
- sent 131 bytes received 6644135 bytes 13288532.00 bytes/sec
- total size is 6643194 speedup is 1.00
- tmpfs_watcher
- get_scripts_directory
- rsync -a 10.200.1.5::scripts/ /scripts/
- autodetect_hardware_and_load_modules
- Detecting hardware using pci-automod (this may take a long time):
- sd_mod ide-disk megaraid_sas uhci-hcd ehci-hcd piix
- Loading sd_mod...
- done!
- Loading ide-disk...
- done!
- Loading megaraid_sas...
- done!
- Loading uhci-hcd...
- done!
- Loading ehci-hcd...
- done!
- Loading piix...
- done!
- get_hostname_by_hosts_file
- Hosts file exists...
- Searching for this machine's hostname in /scripts/hosts by IP: 10.200.10.15
- get_hostname_by_dns
- This hosts name is: vps015
- run_pre_install_scripts
- >>> 99all.harmless_example_script
- I live in /var/lib/systemimager/scripts/pre-install.
- choose_autoinstall_script
- Using autoinstall script: /scripts/centos5-novz.master
- write_variables
- run_autoinstall_script
- >>> /scripts/centos5-novz.master
- get_arch
- Partitioning /dev/sda...
- Old partition table for /dev/sda:
- Disk geometry for /dev/sda: 0kB - 1998GB
- Disk label type: msdos
- Number Start End Size Type File system Flags
- 1 32kB 107MB 107MB primary ext3 boot
- 2 107MB 17GB 17GB primary linux-swap
- 3 17GB 27GB 10GB primary ext3
- 4 27GB 1998GB 1971GB primary ext3
- dd if=/dev/zero of=/dev/sda bs=512 count=1 || shellout
- 1+0 records in
- 1+0 records out
- blockdev --rereadpt /dev/sda
- parted -s -- /dev/sda mklabel msdos || shellout
- Creating partition /dev/sda1.
- parted -s -- /dev/sda mkpart primary 0 106.97 || shellout
- parted -s -- /dev/sda set 1 boot on
- root: logger: parted /dev/sda set 1 boot on
- Creating partition /dev/sda2.
- parted -s -- /dev/sda mkpart primary 106.97 16885.97 || shellout
- Creating partition /dev/sda3.
- parted -s -- /dev/sda mkpart primary 16885.97 27373.97 || shellout
- Creating partition /dev/sda4.
- parted -s -- /dev/sda mkpart primary 27373.97 1998232.97 || shellout
- New partition table for /dev/sda:
- parted -s -- /dev/sda print
- Disk geometry for /dev/sda: 0kB - 1998GB
- Disk label type: msdos
- Number Start End Size Type File system Flags
- 1 32kB 107MB 107MB primary ext3 boot
- 2 107MB 17GB 17GB primary linux-swap
- 3 17GB 27GB 10GB primary ext3
- 4 27GB 1998GB 1971GB primary ext3
- Load software RAID modules.
- insmod: cannot insert `/lib/modules/2.6.21-boel_v4.0.2/kernel/drivers/md/md-mod.ko': File exists (-1): File exists
- insmod: cannot insert `/lib/modules/2.6.21-boel_v4.0.2/kernel/drivers/md/md-mod.ko': File exists (-1): File exists
- modprobe: module raid5 not found.
- modprobe: failed to load module raid5
- modprobe: module raid6 not found.
- modprobe: failed to load module raid6
- insmod: cannot insert `/lib/modules/2.6.21-boel_v4.0.2/kernel/drivers/md/md-mod.ko': File exists (-1): File exists
- Load device mapper driver (for LVM).
- Load additional filesystem drivers.
- modprobe: module fat not found.
- modprobe: failed to load module fat
- modprobe: module vfat not found.
- modprobe: failed to load module vfat
- mkswap -v1 /dev/sda2 -L SWAP-sda2 || shellout
- Setting up swapspace version 1, size = 16779567 kB
- LABEL=SWAP-sda2, UUID=1bb40433-f39f-4773-a0b2-f2d52b4f1127
- swapon /dev/sda2 || shellout
- mke2fs -q -j /dev/sda3 || shellout
- tune2fs -L / /dev/sda3
- tune2fs 1.38 (30-Jun-2005)
- mkdir -p /a/ || shellout
- mount /dev/sda3 /a/ -t ext3 -o defaults || shellout
- mke2fs -q -j /dev/sda4 || shellout
- tune2fs -L /vz /dev/sda4
- tune2fs 1.38 (30-Jun-2005)
- mkdir -p /a/vz || shellout
- mount /dev/sda4 /a/vz -t ext3 -o defaults || shellout
- mke2fs -q -j /dev/sda1 || shellout
- tune2fs -L /boot /dev/sda1
- tune2fs 1.38 (30-Jun-2005)
- mkdir -p /a/boot || shellout
- mount /dev/sda1 /a/boot -t ext3 -o defaults || shellout
- mkdir -p /a/proc || shellout
- mount proc /a/proc -t proc -o defaults || shellout
- mkdir -p /a/sys || shellout
- mount sysfs /a/sys -t sysfs -o defaults || shellout
- Evaluating image size.
- Report task started.
- Quietly installing image...
- /rsync -aHS --exclude=lost+found/ --exclude=/proc/* --numeric-ids 10.200.1.5::centos5-novz/ /a/
- /Report task stopped.
- -
- stop_spinner
- rsync -av --numeric-ids 10.200.1.5::overrides/centos5-novz/ /a/
- rsync -av --numeric-ids 10.200.1.5::overrides/all/ /a/
- rsync: link_stat "/all/." (in overrides) failed: No such file or directory (2)
- rsync error: some files could not be transferred (code 23) at main.c(1532) [receiver=3.0.0pre6]
- Override directory all doesn't seem to exist, but that may be OK.
- rsync -av --numeric-ids 10.200.1.5::overrides/centos5-novz/ /a/
- rsync -av --numeric-ids 10.200.1.5::overrides/vps015/ /a/
- rsync: link_stat "/vps015/." (in overrides) failed: No such file or directory (2)
- rsync error: some files could not be transferred (code 23) at main.c(1532) [receiver=3.0.0pre6]
- Override directory vps015 doesn't seem to exist, but that may be OK.
- mount /dev /a/dev -o bind || shellout
- Detecting systemconfigurator:
- ---
- chroot: cannot execute systemconfigurator: Exec format error
- WARNING: systemconfigurator was not found in the image centos5-novz
- ---
- chroot: cannot execute systemconfigurator: Exec format error
- Killing off running processes.
- write_variables
- <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
- This is the SystemImager autoinstall system
- Your autoinstall has failed. You can use the shell prompt to try and see
- what happened. You may be able to use the <Shift>+<Page Up> keys to scroll
- back and see the text that has passed off the top of the screen. You can use
- <alt>+<f2>, <f3>, or <f4> to work at an alternate shell prompt and preserve
- your messages on the main screen, which is on <alt>+<f1>. Then go back and
- re-read the documentation to see if your problem is described there.
- You have read the documentation, right? :-)
- If you absolutely cannot figure it out, visit the SystemImager support page
- at http://systemimager.org. There you can search the email list archives,
- ask your question on IRC, or even join a mailing list to ask your question.
- There's a good chance someone else has experienced this very same issue and
- can help answer your question. If you find the answer and it's not in the
- documentation, or if you identify a bug, please submit a bug report at the
- SystemImager support page.
- Have fun! http://systemimager.org
- <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
- Installation failed!! Stopping report task.
- /scripts/centos5-novz.master: kill: 629: (17843) - No such process
- Report task stopped.
Advertisement
Add Comment
Please, Sign In to add comment