Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Linux version 2.6.26-ARCH (root@T-POWA-LX) (gcc version 4.3.1 20080724 (prerelease) (GCC) ) #1 SMP PREEMPT Sun Aug 10 12:29:20 UTC 2008
- BIOS-provided physical RAM map:
- BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
- BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
- BIOS-e820: 0000000000100000 - 000000007fe6d800 (usable)
- BIOS-e820: 000000007fe6d800 - 0000000080000000 (reserved)
- BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved)
- BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
- BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
- BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
- BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
- BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
- BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
- x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- 1150MB HIGHMEM available.
- 896MB LOWMEM available.
- Entering add_active_range(0, 0, 523885) 0 entries of 256 used
- Zone PFN ranges:
- DMA 0 -> 4096
- Normal 4096 -> 229376
- HighMem 229376 -> 523885
- Movable zone start PFN for each node
- early_node_map[1] active PFN ranges
- 0: 0 -> 523885
- On node 0 totalpages: 523885
- DMA zone: 32 pages used for memmap
- DMA zone: 0 pages reserved
- DMA zone: 4064 pages, LIFO batch:0
- Normal zone: 1760 pages used for memmap
- Normal zone: 223520 pages, LIFO batch:31
- HighMem zone: 2301 pages used for memmap
- HighMem zone: 292208 pages, LIFO batch:31
- Movable zone: 0 pages used for memmap
- DMI 2.4 present.
- ACPI: RSDP 000FBBF0, 0024 (r2 DELL )
- ACPI: XSDT 7FE6F200, 005C (r1 DELL M08 27D8070B ASL 61)
- ACPI: FACP 7FE6F09C, 00F4 (r4 DELL M08 27D8070B ASL 61)
- ACPI: DSDT 7FE6F800, 5676 (r2 INT430 SYSFexxx 1001 INTL 20050624)
- ACPI: FACS 7FE7E000, 0040
- ACPI: HPET 7FE6F300, 0038 (r1 DELL M08 1 ASL 61)
- ACPI: APIC 7FE6F400, 0068 (r1 DELL M08 27D8070B ASL 47)
- ACPI: MCFG 7FE6F3C0, 003E (r16 DELL M08 27D8070B ASL 61)
- ACPI: SLIC 7FE6F49C, 0176 (r1 DELL M08 27D8070B ASL 61)
- ACPI: BOOT 7FE6EFC0, 0028 (r1 DELL M08 27D8070B ASL 61)
- ACPI: SSDT 7FE6D9BC, 04CC (r1 PmRef CpuPm 3000 INTL 20050624)
- ACPI: PM-Timer IO Port: 0x1008
- ACPI: Local APIC address 0xfee00000
- ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
- ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
- ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
- ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
- ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
- IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
- ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- ACPI: IRQ0 used by override.
- ACPI: IRQ2 used by override.
- ACPI: IRQ9 used by override.
- Enabling APIC mode: Flat. Using 1 I/O APICs
- ACPI: HPET id: 0x8086a201 base: 0xfed00000
- Using ACPI (MADT) for SMP configuration information
- Allocating PCI resources starting at 88000000 (gap: 80000000:74000000)
- PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
- PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
- SMP: Allowing 2 CPUs, 0 hotplug CPUs
- PERCPU: Allocating 39464 bytes of per cpu data
- NR_CPUS: 16, nr_cpu_ids: 2
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519792
- Kernel command line: root=/dev/disk/by-uuid/b4ef6edf-3d17-47d3-abe2-94a328d364cd ro
- mapped APIC to ffffb000 (fee00000)
- mapped IOAPIC to ffffa000 (fec00000)
- Enabling fast FPU save and restore... done.
- Enabling unmasked SIMD FPU exception support... done.
- Initializing CPU#0
- PID hash table entries: 4096 (order: 12, 16384 bytes)
- Extended CMOS year: 2000
- Detected 1995.176 MHz processor.
- Console: colour VGA+ 80x25
- console [tty0] enabled
- Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- Memory: 2072040k/2095540k available (2105k kernel code, 22216k reserved, 738k data, 264k init, 1178036k highmem)
- virtual kernel memory layout:
- fixmap : 0xffee4000 - 0xfffff000 (1132 kB)
- pkmap : 0xff800000 - 0xffc00000 (4096 kB)
- vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
- lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
- .init : 0xc03cd000 - 0xc040f000 ( 264 kB)
- .data : 0xc030e78e - 0xc03c7380 ( 738 kB)
- .text : 0xc0100000 - 0xc030e78e (2105 kB)
- Checking if this processor honours the WP bit even in supervisor mode...Ok.
- CPA: page pool initialized 1 of 1 pages preallocated
- SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- hpet clockevent registered
- Calibrating delay using timer specific routine.. 3996.83 BogoMIPS (lpj=6657339)
- Security Framework initialized
- Capability LSM initialized
- Mount-cache hash table entries: 512
- CPU: L1 I cache: 32K, L1 D cache: 32K
- CPU: L2 cache: 4096K
- CPU: Physical Processor ID: 0
- CPU: Processor Core ID: 0
- Intel machine check architecture supported.
- Intel machine check reporting enabled on CPU#0.
- using mwait in idle threads.
- Checking 'hlt' instruction... OK.
- ACPI: Core revision 20080321
- ACPI: Checking initramfs for custom DSDT
- ENABLING IO-APIC IRQs
- ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
- CPU0: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a
- Booting processor 1/1 ip 6000
- Initializing CPU#1
- Calibrating delay using timer specific routine.. 3991.28 BogoMIPS (lpj=6650049)
- CPU: L1 I cache: 32K, L1 D cache: 32K
- CPU: L2 cache: 4096K
- CPU: Physical Processor ID: 0
- CPU: Processor Core ID: 1
- Intel machine check architecture supported.
- Intel machine check reporting enabled on CPU#1.
- x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
- CPU1: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a
- checking TSC synchronization [CPU#0 -> CPU#1]: passed.
- Brought up 2 CPUs
- Total of 2 processors activated (7987.11 BogoMIPS).
- net_namespace: 652 bytes
- Booting paravirtualized kernel on bare hardware
- NET: Registered protocol family 16
- ACPI: bus type pci registered
- PCI: MCFG configuration 0: base f4000000 segment 0 buses 0 - 63
- PCI: MCFG area at f4000000 reserved in E820
- PCI: Using MMCONFIG for extended config space
- PCI: Using configuration type 1 for base access
- Setting up standard PCI resources
- ACPI: EC: Look up EC in DSDT
- ACPI: Interpreter enabled
- ACPI: (supports S0 S3 S4 S5)
- ACPI: Using IOAPIC for interrupt routing
- ACPI: PCI Root Bridge [PCI0] (0000:00)
- pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
- pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO
- PCI: Transparent bridge - 0000:00:1e.0
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
- ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *7
- ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
- ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *4
- ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11)
- ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
- ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
- ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
- ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
- Linux Plug and Play Support v0.97 (c) Adam Belay
- pnp: PnP ACPI init
- ACPI: bus type pnp registered
- pnp: PnP ACPI: found 12 devices
- ACPI: ACPI bus type pnp unregistered
- PCI: Using ACPI for IRQ routing
- NetLabel: Initializing
- NetLabel: domain hash size = 128
- NetLabel: protocols = UNLABELED CIPSOv4
- NetLabel: unlabeled traffic allowed by default
- ACPI: RTC can wake from S4
- system 00:05: ioport range 0xc80-0xcff could not be reserved
- system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved
- system 00:09: ioport range 0x900-0x97f has been reserved
- system 00:09: ioport range 0x4d0-0x4d1 has been reserved
- system 00:09: ioport range 0x1000-0x1005 has been reserved
- system 00:09: ioport range 0x1008-0x100f has been reserved
- system 00:0a: ioport range 0xf400-0xf4fe has been reserved
- system 00:0a: ioport range 0x1006-0x1007 has been reserved
- system 00:0a: ioport range 0x100a-0x1059 could not be reserved
- system 00:0a: ioport range 0x1060-0x107f has been reserved
- system 00:0a: ioport range 0x1080-0x10bf has been reserved
- system 00:0a: ioport range 0x10c0-0x10df has been reserved
- system 00:0a: ioport range 0x1010-0x102f has been reserved
- system 00:0a: ioport range 0x809-0x809 has been reserved
- system 00:0b: iomem range 0x0-0x9efff could not be reserved
- system 00:0b: iomem range 0x9f000-0x9ffff could not be reserved
- system 00:0b: iomem range 0xc0000-0xcffff could not be reserved
- system 00:0b: iomem range 0xe0000-0xfffff could not be reserved
- system 00:0b: iomem range 0x100000-0x7fe6d7ff could not be reserved
- system 00:0b: iomem range 0x7fe6d800-0x7fefffff could not be reserved
- system 00:0b: iomem range 0x7ff00000-0x7fffffff could not be reserved
- system 00:0b: iomem range 0x7ff00000-0x806fffff could not be reserved
- system 00:0b: iomem range 0xfff00000-0xffffffff could not be reserved
- system 00:0b: iomem range 0xffa00000-0xffafffff has been reserved
- system 00:0b: iomem range 0xfec00000-0xfec0ffff could not be reserved
- system 00:0b: iomem range 0xfee00000-0xfee0ffff could not be reserved
- system 00:0b: iomem range 0xfed20000-0xfed8ffff could not be reserved
- system 00:0b: iomem range 0xfeda0000-0xfeda3fff could not be reserved
- system 00:0b: iomem range 0xfeda4000-0xfeda4fff could not be reserved
- system 00:0b: iomem range 0xfeda5000-0xfeda5fff could not be reserved
- system 00:0b: iomem range 0xfeda6000-0xfeda6fff has been reserved
- system 00:0b: iomem range 0xfed18000-0xfed1bfff could not be reserved
- system 00:0b: iomem range 0xf4000000-0xf7ffffff could not be reserved
- Switched to high resolution mode on CPU 1
- Switched to high resolution mode on CPU 0
- PCI: Bridge: 0000:00:01.0
- IO window: e000-efff
- MEM window: 0xfa000000-0xfeafffff
- PREFETCH window: 0x00000000e0000000-0x00000000efffffff
- PCI: Bridge: 0000:00:1c.0
- IO window: disabled.
- MEM window: disabled.
- PREFETCH window: disabled.
- PCI: Bridge: 0000:00:1c.1
- IO window: disabled.
- MEM window: 0xf9f00000-0xf9ffffff
- PREFETCH window: disabled.
- PCI: Bridge: 0000:00:1c.3
- IO window: d000-dfff
- MEM window: 0xf9c00000-0xf9efffff
- PREFETCH window: 0x00000000f0000000-0x00000000f01fffff
- PCI: Bridge: 0000:00:1c.5
- IO window: disabled.
- MEM window: 0xf9b00000-0xf9bfffff
- PREFETCH window: disabled.
- PCI: Bridge: 0000:00:1e.0
- IO window: disabled.
- MEM window: 0xf9a00000-0xf9afffff
- PREFETCH window: disabled.
- ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
- PCI: Setting latency timer of device 0000:00:01.0 to 64
- ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
- PCI: Setting latency timer of device 0000:00:1c.0 to 64
- ACPI: PCI Interrupt 0000:00:1c.1[b] -> GSI 17 (level, low) -> IRQ 17
- PCI: Setting latency timer of device 0000:00:1c.1 to 64
- ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
- PCI: Setting latency timer of device 0000:00:1c.3 to 64
- ACPI: PCI Interrupt 0000:00:1c.5[b] -> GSI 17 (level, low) -> IRQ 17
- PCI: Setting latency timer of device 0000:00:1c.5 to 64
- PCI: Setting latency timer of device 0000:00:1e.0 to 64
- NET: Registered protocol family 2
- IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- TCP: Hash tables configured (established 131072 bind 65536)
- TCP reno registered
- NET: Registered protocol family 1
- Unpacking initramfs... done
- Freeing initrd memory: 897k freed
- Simple Boot Flag at 0x79 set to 0x1
- apm: BIOS not found.
- highmem bounce pool size: 64 pages
- VFS: Disk quotas dquot_6.5.1
- Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- msgmni has been set to 1749
- Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
- io scheduler noop registered
- io scheduler anticipatory registered
- io scheduler deadline registered
- io scheduler cfq registered (default)
- pci 0000:01:00.0: Boot video device
- PCI: Setting latency timer of device 0000:00:01.0 to 64
- assign_interrupt_mode Found MSI capability
- Allocate Port Service[0000:00:01.0:pcie00]
- Allocate Port Service[0000:00:01.0:pcie02]
- Allocate Port Service[0000:00:01.0:pcie03]
- PCI: Setting latency timer of device 0000:00:1c.0 to 64
- assign_interrupt_mode Found MSI capability
- Allocate Port Service[0000:00:1c.0:pcie00]
- Allocate Port Service[0000:00:1c.0:pcie02]
- Allocate Port Service[0000:00:1c.0:pcie03]
- PCI: Setting latency timer of device 0000:00:1c.1 to 64
- assign_interrupt_mode Found MSI capability
- Allocate Port Service[0000:00:1c.1:pcie00]
- Allocate Port Service[0000:00:1c.1:pcie02]
- Allocate Port Service[0000:00:1c.1:pcie03]
- PCI: Setting latency timer of device 0000:00:1c.3 to 64
- assign_interrupt_mode Found MSI capability
- Allocate Port Service[0000:00:1c.3:pcie00]
- Allocate Port Service[0000:00:1c.3:pcie02]
- Allocate Port Service[0000:00:1c.3:pcie03]
- PCI: Setting latency timer of device 0000:00:1c.5 to 64
- assign_interrupt_mode Found MSI capability
- Allocate Port Service[0000:00:1c.5:pcie00]
- Allocate Port Service[0000:00:1c.5:pcie02]
- Allocate Port Service[0000:00:1c.5:pcie03]
- isapnp: Scanning for PnP cards...
- isapnp: No Plug & Play device found
- Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
- input: Macintosh mouse button emulation as /class/input/input0
- PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
- serio: i8042 KBD port at 0x60,0x64 irq 1
- serio: i8042 AUX port at 0x60,0x64 irq 12
- mice: PS/2 mouse device common for all mice
- cpuidle: using governor ladder
- cpuidle: using governor menu
- TCP cubic registered
- NET: Registered protocol family 17
- Using IPI No-Shortcut mode
- registered taskstats version 1
- Freeing unused kernel memory: 264k freed
- input: AT Translated Set 2 keyboard as /class/input/input1
- No dock devices found.
- SCSI subsystem initialized
- libata version 3.00 loaded.
- ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
- PCI: Setting latency timer of device 0000:00:1f.1 to 64
- ACPI: PCI interrupt for device 0000:00:1f.1 disabled
- ahci 0000:00:1f.2: version 3.0
- ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 17 (level, low) -> IRQ 17
- ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode
- ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
- PCI: Setting latency timer of device 0000:00:1f.2 to 64
- scsi0 : ahci
- scsi1 : ahci
- scsi2 : ahci
- ata1: SATA max UDMA/133 abar m2048@0xfebfb800 port 0xfebfb900 irq 17
- ata2: DUMMY
- ata3: SATA max UDMA/133 abar m2048@0xfebfb800 port 0xfebfba00 irq 17
- ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- ata1.00: ATA-7: HTS721010G9SA00, MCZOC10V, max UDMA/100
- ata1.00: 195371568 sectors, multi 8: LBA48 NCQ (depth 31/32)
- ata1.00: configured for UDMA/100
- ata3: SATA link down (SStatus 0 SControl 300)
- scsi 0:0:0:0: Direct-Access ATA HTS721010G9SA00 MCZO PQ: 0 ANSI: 5
- ata_piix 0000:00:1f.1: version 2.12
- ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
- PCI: Setting latency timer of device 0000:00:1f.1 to 64
- scsi3 : ata_piix
- scsi4 : ata_piix
- ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14
- ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15
- ata4.00: ATAPI: PBDS DVD+/-RW DS-8W1P, BD1C, max UDMA/33
- ata4.00: configured for UDMA/33
- ata5: port disabled. ignoring.
- scsi 3:0:0:0: CD-ROM PBDS DVD+-RW DS-8W1P BD1C PQ: 0 ANSI: 5
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- USB Universal Host Controller Interface driver v3.0
- ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20
- PCI: Setting latency timer of device 0000:00:1a.0 to 64
- uhci_hcd 0000:00:1a.0: UHCI Host Controller
- uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
- uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20
- usb usb1: configuration #1 chosen from 1 choice
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 2 ports detected
- ACPI: PCI Interrupt 0000:00:1a.1[b] -> GSI 21 (level, low) -> IRQ 21
- PCI: Setting latency timer of device 0000:00:1a.1 to 64
- uhci_hcd 0000:00:1a.1: UHCI Host Controller
- uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
- uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00
- usb usb2: configuration #1 chosen from 1 choice
- hub 2-0:1.0: USB hub found
- hub 2-0:1.0: 2 ports detected
- ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22
- PCI: Setting latency timer of device 0000:00:1a.7 to 64
- ehci_hcd 0000:00:1a.7: EHCI Host Controller
- ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3
- ehci_hcd 0000:00:1a.7: debug port 1
- PCI: cache line size of 32 is not supported by device 0000:00:1a.7
- ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
- ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
- usb usb3: configuration #1 chosen from 1 choice
- hub 3-0:1.0: USB hub found
- hub 3-0:1.0: 4 ports detected
- Driver 'sd' needs updating - please use bus_type methods
- sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
- sd 0:0:0:0: [sda] Write Protect is off
- sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
- sd 0:0:0:0: [sda] Write Protect is off
- sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- sda:<4>Driver 'sr' needs updating - please use bus_type methods
- ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
- PCI: Setting latency timer of device 0000:00:1d.0 to 64
- uhci_hcd 0000:00:1d.0: UHCI Host Controller
- uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
- uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80
- usb usb4: configuration #1 chosen from 1 choice
- hub 4-0:1.0: USB hub found
- hub 4-0:1.0: 2 ports detected
- ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 21 (level, low) -> IRQ 21
- PCI: Setting latency timer of device 0000:00:1d.1 to 64
- uhci_hcd 0000:00:1d.1: UHCI Host Controller
- uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
- uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60
- usb usb5: configuration #1 chosen from 1 choice
- hub 5-0:1.0: USB hub found
- hub 5-0:1.0: 2 ports detected
- ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 22
- PCI: Setting latency timer of device 0000:00:1d.2 to 64
- uhci_hcd 0000:00:1d.2: UHCI Host Controller
- uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
- uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
- usb usb6: configuration #1 chosen from 1 choice
- hub 6-0:1.0: USB hub found
- hub 6-0:1.0: 2 ports detected
- sda1 sda2 sda3 sda4
- ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
- PCI: Setting latency timer of device 0000:00:1d.7 to 64
- ehci_hcd 0000:00:1d.7: EHCI Host Controller
- ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
- ehci_hcd 0000:00:1d.7: debug port 1
- PCI: cache line size of 32 is not supported by device 0000:00:1d.7
- ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
- sd 0:0:0:0: [sda] Attached SCSI disk
- ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
- usb usb7: configuration #1 chosen from 1 choice
- hub 7-0:1.0: USB hub found
- hub 7-0:1.0: 6 ports detected
- sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
- Uniform CD-ROM driver Revision: 3.20
- sr 3:0:0:0: Attached scsi CD-ROM sr0
- SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
- SGI XFS Quota Management subsystem
- usb 7-6: new high speed USB device using ehci_hcd and address 2
- XFS mounting filesystem sda1
- usb 7-6: configuration #1 chosen from 1 choice
- Starting XFS recovery on filesystem: sda1 (logdev: internal)
- Ending XFS recovery on filesystem: sda1 (logdev: internal)
- rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
- rtc0: alarms up to one month, y3k
- tg3.c:v3.92.1 (June 9, 2008)
- ACPI: PCI Interrupt 0000:09:00.0[A] -> GSI 17 (level, low) -> IRQ 17
- PCI: Setting latency timer of device 0000:09:00.0 to 64
- eth0: Tigon3 [partno(BCM95906) rev c002 PHY(5906)] (PCI Express) 10/100Base-TX Ethernet 00:1e:c9:00:77:cf
- eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[0]
- eth0: dma_rwctrl[76180000] dma_mask[64-bit]
- iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.2.26ks
- iwl4965: Copyright(c) 2003-2008 Intel Corporation
- ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17
- PCI: Setting latency timer of device 0000:0c:00.0 to 64
- iwl4965: Detected Intel Wireless WiFi Link 4965AGN
- iwl4965: Tunable channels: 11 802.11bg, 13 802.11a channels
- phy0: Selected rate control algorithm 'iwl-4965-rs'
- ACPI: PCI interrupt for device 0000:0c:00.0 disabled
- input: 4965AGN as /class/input/input2
- ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21
- PCI: Setting latency timer of device 0000:00:1b.0 to 64
- ACPI: AC Adapter [AC] (off-line)
- ACPI: Battery Slot [BAT0] (battery present)
- input: Lid Switch as /class/input/input3
- ACPI: Lid Switch [LID]
- input: Power Button (CM) as /class/input/input4
- ACPI: Power Button (CM) [PBTN]
- input: Sleep Button (CM) as /class/input/input5
- ACPI: Sleep Button (CM) [SBTN]
- ACPI: SSDT 7FE6E4F2, 0286 (r1 PmRef Cpu0Ist 3000 INTL 20050624)
- ACPI: SSDT 7FE6DE88, 05E5 (r1 PmRef Cpu0Cst 3001 INTL 20050624)
- Monitor-Mwait will be used to enter C-1 state
- Monitor-Mwait will be used to enter C-2 state
- Monitor-Mwait will be used to enter C-3 state
- ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
- ACPI: ACPI0007:00 is registered as cooling_device0
- ACPI: Processor [CPU0] (supports 8 throttling states)
- ACPI: SSDT 7FE6E778, 00C4 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
- ACPI: SSDT 7FE6E46D, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
- ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
- ACPI: ACPI0007:01 is registered as cooling_device1
- ACPI: Processor [CPU1] (supports 8 throttling states)
- Marking TSC unstable due to: TSC halts in idle.
- ACPI: LNXTHERM:01 is registered as thermal_zone0
- ACPI: Thermal Zone [THM] (25 C)
- dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
- sd 0:0:0:0: Attached scsi generic sg0 type 0
- sr 3:0:0:0: Attached scsi generic sg1 type 5
- Linux agpgart interface v0.103
- ACPI: WMI: Mapper loaded
- ACPI: device:32 is registered as cooling_device2
- input: Video Bus as /class/input/input6
- ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
- ACPI: device:37 is registered as cooling_device3
- input: Video Bus as /class/input/input7
- ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
- input: Video Bus as /class/input/input8
- ACPI: Video Device [VID2] (multi-head: yes rom: no post: no)
- Linux video capture interface: v2.00
- ACPI: PCI Interrupt 0000:00:1f.3[b] -> GSI 17 (level, low) -> IRQ 17
- input: PC Speaker as /class/input/input9
- uvcvideo: Found UVC 1.00 device Laptop Integrated Webcam (05a9:2640)
- uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26).
- input: Laptop Integrated Webcam as /class/input/input10
- usbcore: registered new interface driver uvcvideo
- USB Video Class driver (v0.1.0)
- ricoh-mmc: Ricoh MMC Controller disabling driver
- ricoh-mmc: Copyright(c) Philip Langdale
- ricoh-mmc: Ricoh MMC controller found at 0000:03:01.2 [1180:0843] (rev 12)
- ricoh-mmc: Controller is now disabled.
- ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 19
- sdhci: Secure Digital Host Controller Interface driver
- sdhci: Copyright(c) Pierre Ossman
- ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[f9aff800-f9afffff] Max Packet=[2048] IR/IT contexts=[4/4]
- sdhci: SDHCI controller found at 0000:03:01.1 [1180:0822] (rev 22)
- ACPI: PCI Interrupt 0000:03:01.1[b] -> GSI 18 (level, low) -> IRQ 18
- mmc0: SDHCI at 0xf9aff400 irq 18 DMA
- input: PS/2 Mouse as /class/input/input11
- input: AlpsPS/2 ALPS GlidePoint as /class/input/input12
- Clocksource tsc unstable (delta = -65557573 ns)
- XFS mounting filesystem sda4
- Starting XFS recovery on filesystem: sda4 (logdev: internal)
- Ending XFS recovery on filesystem: sda4 (logdev: internal)
- XFS mounting filesystem sda2
- ieee1394: Host added: ID:BUS[0-00:1023] GUID[394fc0001541b181]
- Starting XFS recovery on filesystem: sda2 (logdev: internal)
- Ending XFS recovery on filesystem: sda2 (logdev: internal)
- Adding 2000084k swap on /dev/sda3. Priority:-1 extents:1 across:2000084k
- tg3: eth0: Link is up at 100 Mbps, full duplex.
- tg3: eth0: Flow control is on for TX and on for RX.
- atkbd.c: Unknown key pressed (translated set 2, code 0x88 on isa0060/serio0).
- atkbd.c: Use 'setkeycodes e008 <keycode>' to make it known.
- atkbd.c: Unknown key pressed (translated set 2, code 0x91 on isa0060/serio0).
- atkbd.c: Use 'setkeycodes e011 <keycode>' to make it known.
- atkbd.c: Unknown key released (translated set 2, code 0x91 on isa0060/serio0).
- atkbd.c: Use 'setkeycodes e011 <keycode>' to make it known.
- usb 1-2: new full speed USB device using uhci_hcd and address 2
- usb 1-2: configuration #1 chosen from 1 choice
- hub 1-2:1.0: USB hub found
- hub 1-2:1.0: 3 ports detected
- usb 1-2.1: new full speed USB device using uhci_hcd and address 3
- usb 1-2.1: configuration #1 chosen from 1 choice
- Bluetooth: Core ver 2.11
- NET: Registered protocol family 31
- Bluetooth: HCI device and connection manager initialized
- Bluetooth: HCI socket layer initialized
- Bluetooth: HCI USB driver ver 2.9
- usb 1-2.2: new full speed USB device using uhci_hcd and address 4
- usb 1-2.2: configuration #1 chosen from 1 choice
- usb 1-2.3: new full speed USB device using uhci_hcd and address 5
- usb 1-2.3: configuration #1 chosen from 1 choice
- usbcore: registered new interface driver hiddev
- usbcore: registered new interface driver hci_usb
- input: Broadcom Corp as /class/input/input13
- input,hidraw0: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1a.0-2.2
- input: Broadcom Corp as /class/input/input14
- input,hidraw1: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1a.0-2.3
- usbcore: registered new interface driver usbhid
- usbhid: v2.6:USB HID core driver
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement