Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000210] pid_max: default: 32768 minimum: 301
- [ 0.000350] Mount-cache hash table entries: 256
- [ 0.000606] Initializing cgroup subsys cpuacct
- [ 0.000734] CPU: Physical Processor ID: 0
- [ 0.000834] CPU: Processor Core ID: 0
- [ 0.000936] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
- ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
- [ 0.001584] mce: CPU supports 7 MCE banks
- [ 0.001695] CPU0: Thermal monitoring enabled (TM1)
- [ 0.001805] process: using mwait in idle threads
- [ 0.001910] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
- Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
- tlb_flushall_shift: 1
- [ 0.002299] Freeing SMP alternatives: 24k freed
- [ 0.002409] ACPI: Core revision 20121018
- [ 0.017730] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.117689] smpboot: CPU0: Intel(R) Core(TM) i7-3517U CPU @ 1.90GHz (fam: 06, model: 3a, stepping: 09)
- [ 0.117983] TSC deadline timer enabled
- [ 0.117987] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, Intel PMU driver.
- [ 0.118278] ... version: 3
- [ 0.118377] ... bit width: 48
- [ 0.118477] ... generic registers: 4
- [ 0.118576] ... value mask: 0000ffffffffffff
- [ 0.118677] ... max period: 000000007fffffff
- [ 0.118779] ... fixed-purpose events: 3
- [ 0.118878] ... event mask: 000000070000000f
- [ 0.119160] smpboot: Booting Node 0, Processors #1 #2 #3 OK
- [ 0.160830] Brought up 4 CPUs
- [ 0.160934] smpboot: Total of 4 processors activated (19155.98 BogoMIPS)
- [ 0.165373] devtmpfs: initialized
- [ 0.165656] PM: Registering ACPI NVS region [mem 0xd97cf000-0xd9dcffff] (6295552 bytes)
- [ 0.165864] PM: Registering ACPI NVS region [mem 0xda64d000-0xda8ccfff] (2621440 bytes)
- [ 0.166011] PM: Registering ACPI NVS region [mem 0xda8d3000-0xda915fff] (274432 bytes)
- [ 0.166301] regulator-dummy: no parameters
- [ 0.166485] NET: Registered protocol family 16
- [ 0.166891] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
- [ 0.167000] ACPI: bus type pci registered
- [ 0.167224] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
- [ 0.167383] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
- [ 0.182249] PCI: Using configuration type 1 for base access
- [ 0.186871] bio: create slab <bio-0> at 0
- [ 0.187099] ACPI: Added _OSI(Module Device)
- [ 0.187201] ACPI: Added _OSI(Processor Device)
- [ 0.187300] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.187401] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.190093] ACPI: EC: EC description table is found, configuring boot EC
- [ 0.192847] ACPI: Executed 1 blocks of module-level executable AML code
- [ 0.228063] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
- [ 0.288318] ACPI: SSDT 00000000da5fa018 00853 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
- [ 0.289171] ACPI: Dynamic OEM Table Load:
- [ 0.289365] ACPI: SSDT (null) 00853 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
- [ 0.318074] ACPI: SSDT 00000000da5fba98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
- [ 0.318956] ACPI: Dynamic OEM Table Load:
- [ 0.319152] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
- [ 0.347882] ACPI: SSDT 00000000da5fcc18 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
- [ 0.348724] ACPI: Dynamic OEM Table Load:
- [ 0.348917] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
- [ 0.378499] ACPI: Interpreter enabled
- [ 0.378605] ACPI: (supports S0 S3 S4 S5)
- [ 0.378915] ACPI: Using IOAPIC for interrupt routing
- [ 0.429780] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
- [ 0.429940] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 0.430369] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
- [ 0.430474] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 0.431393] PCI host bridge to bus 0000:00
- [ 0.431499] pci_bus 0000:00: root bus resource [bus 00-3e]
- [ 0.431604] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
- [ 0.431707] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
- [ 0.431811] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
- [ 0.431916] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
- [ 0.432019] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
- [ 0.432123] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
- [ 0.432229] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
- [ 0.432333] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
- [ 0.432438] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
- [ 0.432544] pci_bus 0000:00: root bus resource [mem 0xdfe00000-0xfeafffff]
- [ 0.432660] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
- [ 0.432707] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
- [ 0.432721] pci 0000:00:02.0: reg 10: [mem 0xf7800000-0xf7bfffff 64bit]
- [ 0.432729] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
- [ 0.432735] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]
- [ 0.432777] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
- [ 0.432789] pci 0000:00:04.0: reg 10: [mem 0xfed98000-0xfed9ffff 64bit]
- [ 0.432864] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
- [ 0.432890] pci 0000:00:14.0: reg 10: [mem 0xf7d00000-0xf7d0ffff 64bit]
- [ 0.432971] pci 0000:00:14.0: PME# supported from D3hot D3cold
- [ 0.432999] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
- [ 0.433021] pci 0000:00:16.0: reg 10: [mem 0xf7d22000-0xf7d2200f 64bit]
- [ 0.433094] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
- [ 0.433134] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
- [ 0.433158] pci 0000:00:1a.0: reg 10: [mem 0xf7d20000-0xf7d203ff]
- [ 0.433259] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
- [ 0.433291] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
- [ 0.433309] pci 0000:00:1b.0: reg 10: [mem 0xf7d18000-0xf7d1bfff 64bit]
- [ 0.433388] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- [ 0.433417] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
- [ 0.433548] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- [ 0.433587] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
- [ 0.433717] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
- [ 0.433763] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
- [ 0.433788] pci 0000:00:1d.0: reg 10: [mem 0xf7d1f000-0xf7d1f3ff]
- [ 0.433889] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
- [ 0.433918] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
- [ 0.434057] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
- [ 0.434080] pci 0000:00:1f.2: reg 10: [io 0xf0b0-0xf0b7]
- [ 0.434089] pci 0000:00:1f.2: reg 14: [io 0xf0a0-0xf0a3]
- [ 0.434098] pci 0000:00:1f.2: reg 18: [io 0xf090-0xf097]
- [ 0.434107] pci 0000:00:1f.2: reg 1c: [io 0xf080-0xf083]
- [ 0.434116] pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f]
- [ 0.434125] pci 0000:00:1f.2: reg 24: [mem 0xf7d1e000-0xf7d1e7ff]
- [ 0.434178] pci 0000:00:1f.2: PME# supported from D3hot
- [ 0.434202] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
- [ 0.434220] pci 0000:00:1f.3: reg 10: [mem 0xf7d1d000-0xf7d1d0ff 64bit]
- [ 0.434244] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f]
- [ 0.434287] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
- [ 0.434310] pci 0000:00:1f.6: reg 10: [mem 0xf7d1c000-0xf7d1cfff 64bit]
- [ 0.434461] pci 0000:00:1c.0: PCI bridge to [bus 01]
- [ 0.434810] pci 0000:02:00.0: [8086:088e] type 00 class 0x028000
- [ 0.434972] pci 0000:02:00.0: reg 10: [mem 0xf7c00000-0xf7c01fff 64bit]
- [ 0.435632] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
- [ 0.447766] pci 0000:00:1c.1: PCI bridge to [bus 02]
- [ 0.447877] pci 0000:00:1c.1: bridge window [mem 0xf7c00000-0xf7cfffff]
- [ 0.447903] pci_bus 0000:00: on NUMA node 0
- [ 0.447944] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
- [ 0.447989] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
- [ 0.448163] pci0000:00: Requesting ACPI _OSC control (0x1d)
- [ 0.448528] pci0000:00: ACPI _OSC control (0x18) granted
- [ 0.450034] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
- [ 0.450630] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 12)
- [ 0.451176] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 12)
- [ 0.451719] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 12)
- [ 0.452266] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
- [ 0.452903] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
- [ 0.453537] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 12)
- [ 0.454085] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 10 12)
- [ 0.454707] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.454811] vgaarb: loaded
- [ 0.454905] vgaarb: bridge control possible 0000:00:02.0
- [ 0.455149] SCSI subsystem initialized
- [ 0.455247] ACPI: bus type scsi registered
- [ 0.455423] libata version 3.00 loaded.
- [ 0.455591] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.455690] PCI: Using ACPI for IRQ routing
- [ 0.457556] PCI: pci_cache_line_size set to 64 bytes
- [ 0.457564] pci 0000:00:04.0: no compatible bridge window for [mem 0xfed98000-0xfed9ffff 64bit]
- [ 0.457782] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
- [ 0.457784] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
- [ 0.457786] e820: reserve RAM buffer [mem 0xd97cf000-0xdbffffff]
- [ 0.457793] e820: reserve RAM buffer [mem 0xd9dea000-0xdbffffff]
- [ 0.457801] e820: reserve RAM buffer [mem 0xd9df2000-0xdbffffff]
- [ 0.457808] e820: reserve RAM buffer [mem 0xd9f50000-0xdbffffff]
- [ 0.457815] e820: reserve RAM buffer [mem 0xd9f93000-0xdbffffff]
- [ 0.457822] e820: reserve RAM buffer [mem 0xd9f9c000-0xdbffffff]
- [ 0.457829] e820: reserve RAM buffer [mem 0xd9fbe000-0xdbffffff]
- [ 0.457836] e820: reserve RAM buffer [mem 0xd9fd7000-0xdbffffff]
- [ 0.457842] e820: reserve RAM buffer [mem 0xd9fe5000-0xdbffffff]
- [ 0.457848] e820: reserve RAM buffer [mem 0xd9ff5000-0xdbffffff]
- [ 0.457854] e820: reserve RAM buffer [mem 0xda001000-0xdbffffff]
- [ 0.457859] e820: reserve RAM buffer [mem 0xda025000-0xdbffffff]
- [ 0.457864] e820: reserve RAM buffer [mem 0xda03c000-0xdbffffff]
- [ 0.457869] e820: reserve RAM buffer [mem 0xda04f000-0xdbffffff]
- [ 0.457874] e820: reserve RAM buffer [mem 0xda089000-0xdbffffff]
- [ 0.457878] e820: reserve RAM buffer [mem 0xda08b000-0xdbffffff]
- [ 0.457882] e820: reserve RAM buffer [mem 0xda08e000-0xdbffffff]
- [ 0.457885] e820: reserve RAM buffer [mem 0xda0a9000-0xdbffffff]
- [ 0.457889] e820: reserve RAM buffer [mem 0xda8d3000-0xdbffffff]
- [ 0.457891] e820: reserve RAM buffer [mem 0xdad29000-0xdbffffff]
- [ 0.457893] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
- [ 0.457895] e820: reserve RAM buffer [mem 0x11f200000-0x11fffffff]
- [ 0.458090] Switching to clocksource hpet
- [ 0.462467] pnp: PnP ACPI init
- [ 0.462576] ACPI: bus type pnp registered
- [ 0.462785] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
- [ 0.462889] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.462952] pnp 00:01: [dma 4]
- [ 0.463006] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
- [ 0.463066] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
- [ 0.463218] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
- [ 0.463296] system 00:04: [io 0x0680-0x069f] has been reserved
- [ 0.463397] system 00:04: [io 0x1000-0x100f] has been reserved
- [ 0.463498] system 00:04: [io 0xffff] has been reserved
- [ 0.463597] system 00:04: [io 0xffff] has been reserved
- [ 0.463696] system 00:04: [io 0x0400-0x0453] has been reserved
- [ 0.463796] system 00:04: [io 0x0458-0x047f] has been reserved
- [ 0.463896] system 00:04: [io 0x0500-0x057f] has been reserved
- [ 0.463998] system 00:04: [io 0x164e-0x164f] has been reserved
- [ 0.464098] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.464165] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.464257] system 00:06: [io 0x0454-0x0457] has been reserved
- [ 0.464358] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
- [ 0.464450] system 00:07: [io 0x04d0-0x04d1] has been reserved
- [ 0.464553] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.464618] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
- [ 0.464726] pnp 00:09: Plug and Play ACPI device, IDs ETD0105 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
- [ 0.464818] pnp 00:0a: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
- [ 0.465099] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
- [ 0.465201] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
- [ 0.465303] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
- [ 0.465403] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
- [ 0.465505] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
- [ 0.465607] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
- [ 0.465708] system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved
- [ 0.465810] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
- [ 0.465912] system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
- [ 0.466013] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
- [ 0.466115] system 00:0b: [mem 0xdfe00000-0xdfe00fff] has been reserved
- [ 0.466218] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.466461] system 00:0c: [mem 0x20000000-0x201fffff] has been reserved
- [ 0.466564] system 00:0c: [mem 0x40004000-0x40004fff] has been reserved
- [ 0.466669] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.466717] pnp: PnP ACPI: found 13 devices
- [ 0.466813] ACPI: ACPI bus type pnp unregistered
- [ 0.471535] pci 0000:00:04.0: BAR 0: assigned [mem 0xdfe08000-0xdfe0ffff 64bit]
- [ 0.471643] pci 0000:00:1c.0: PCI bridge to [bus 01]
- [ 0.471753] pci 0000:00:1c.1: PCI bridge to [bus 02]
- [ 0.471857] pci 0000:00:1c.1: bridge window [mem 0xf7c00000-0xf7cfffff]
- [ 0.471989] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
- [ 0.471991] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
- [ 0.471993] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
- [ 0.471995] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
- [ 0.471997] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
- [ 0.471999] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
- [ 0.472000] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
- [ 0.472002] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
- [ 0.472004] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
- [ 0.472006] pci_bus 0000:00: resource 13 [mem 0xdfe00000-0xfeafffff]
- [ 0.472008] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
- [ 0.472073] NET: Registered protocol family 2
- [ 0.472340] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
- [ 0.472521] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
- [ 0.472690] TCP: Hash tables configured (established 32768 bind 32768)
- [ 0.472807] TCP: reno registered
- [ 0.472905] UDP hash table entries: 2048 (order: 4, 65536 bytes)
- [ 0.473017] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
- [ 0.473195] NET: Registered protocol family 1
- [ 0.473303] pci 0000:00:02.0: Boot video device
- [ 0.474597] pci 0000:00:14.0: Configurable ports to enable SuperSpeed: 0xf
- [ 0.474602] pci 0000:00:14.0: USB 3.0 ports that are now enabled under xHCI: 0xf
- [ 0.474606] pci 0000:00:14.0: Configurable USB 2.0 ports to hand over to xCHI: 0xf
- [ 0.474610] pci 0000:00:14.0: USB 2.0 ports that are now switched over to xHCI: 0xf
- [ 0.474653] pci 0000:00:1a.0: EHCI: BIOS handoff
- [ 0.498216] pci 0000:00:1d.0: EHCI: BIOS handoff
- [ 0.518169] PCI: CLS 64 bytes, default 64
- [ 0.518206] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
- [ 0.518308] software IO TLB [mem 0xd57cf000-0xd97cf000] (64MB) mapped at [ffff8800d57cf000-ffff8800d97cefff]
- [ 0.519022] audit: initializing netlink socket (disabled)
- [ 0.519128] type=2000 audit(1372368643.530:1): initialized
- [ 0.519782] VFS: Disk quotas dquot_6.5.2
- [ 0.519903] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.520265] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.520403] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
- [ 0.520758] OCFS2 1.5.0
- [ 0.520907] ocfs2: Registered cluster interface o2cb
- [ 0.521006] OCFS2 DLMFS 1.5.0
- [ 0.521132] OCFS2 User DLM kernel interface loaded
- [ 0.521232] OCFS2 Node Manager 1.5.0
- [ 0.521425] OCFS2 DLM 1.5.0
- [ 0.521711] GFS2 installed
- [ 0.521809] msgmni has been set to 7687
- [ 0.522152] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
- [ 0.522254] io scheduler noop registered
- [ 0.522351] io scheduler deadline registered
- [ 0.522463] io scheduler cfq registered (default)
- [ 0.522926] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.523712] Linux agpgart interface v0.103
- [ 0.524150] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
- [ 0.528272] ACPI: Lid Switch [LID]
- [ 0.528446] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
- [ 0.528552] ACPI: Power Button [PWRB]
- [ 0.528719] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
- [ 0.528826] ACPI: Sleep Button [SLPB]
- [ 0.530380] [drm] Initialized drm 1.1.0 20060810
- [ 0.531183] [drm] Memory usable by graphics device = 2048M
- [ 0.531286] i915 0000:00:02.0: setting latency timer to 64
- [ 0.598129] i915 0000:00:02.0: irq 40 for MSI/MSI-X
- [ 0.598137] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
- [ 0.598238] [drm] Driver supports precise vblank timestamp query.
- [ 0.598374] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
- [ 0.756235] fbcon: inteldrmfb (fb0) is primary device
- [ 1.516659] tsc: Refined TSC clocksource calibration: 2394.560 MHz
- [ 1.516662] Switching to clocksource tsc
- [ 1.996286] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
- [ 2.841474] Console: switching to colour frame buffer device 240x67
- [ 2.849534] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
- [ 2.849569] i915 0000:00:02.0: registered panic notifier
- [ 2.904930] acpi device:27: registered as cooling_device0
- [ 2.984509] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
- [ 2.984622] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
- [ 2.984714] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
- [ 2.986592] brd: module loaded
- [ 2.987554] loop: module loaded
- [ 2.987576] Uniform Multi-Platform E-IDE driver
- [ 2.987657] ide-gd driver 1.18
- [ 2.987854] Loading iSCSI transport class v2.0-870.
- [ 2.988170] isci: Intel(R) C600 SAS Controller Driver - version 1.1.0
- [ 2.988241] GDT-HA: Storage RAID Controller Driver. Version: 3.05
- [ 2.988406] ahci 0000:00:1f.2: version 3.0
- [ 2.988465] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
- [ 2.988521] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
- [ 2.988570] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
- [ 2.988617] ahci 0000:00:1f.2: setting latency timer to 64
- [ 2.989527] scsi0 : ahci
- [ 2.989651] scsi1 : ahci
- [ 2.989760] scsi2 : ahci
- [ 2.989866] scsi3 : ahci
- [ 2.989973] scsi4 : ahci
- [ 2.990078] scsi5 : ahci
- [ 2.990175] ata1: SATA max UDMA/133 abar m2048@0xf7d1e000 port 0xf7d1e100 irq 41
- [ 2.990217] ata2: DUMMY
- [ 2.990228] ata3: DUMMY
- [ 2.990238] ata4: DUMMY
- [ 2.990249] ata5: DUMMY
- [ 2.990260] ata6: DUMMY
- [ 2.990527] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
- [ 2.992999] i8042: Detected active multiplexing controller, rev 1.1
- [ 2.993809] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 2.993839] serio: i8042 AUX0 port at 0x60,0x64 irq 12
- [ 2.993867] serio: i8042 AUX1 port at 0x60,0x64 irq 12
- [ 2.993895] serio: i8042 AUX2 port at 0x60,0x64 irq 12
- [ 2.993923] serio: i8042 AUX3 port at 0x60,0x64 irq 12
- [ 2.994135] mousedev: PS/2 mouse device common for all mice
- [ 2.994274] cpuidle: using governor ladder
- [ 2.994296] cpuidle: using governor menu
- [ 2.994558] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
- [ 3.008223] TCP: cubic registered
- [ 3.009856] NET: Registered protocol family 17
- [ 3.011884] PM: Hibernation image not present or could not be loaded.
- [ 3.011892] registered taskstats version 1
- [ 3.013881] ALSA device list:
- [ 3.015482] #0: HDA Intel PCH at 0xf7d18000 irq 42
- [ 3.028698] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
- [ 3.333946] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 3.335935] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
- [ 3.337793] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
- [ 3.337808] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
- [ 3.339715] ata1.00: ATA-9: SanDisk SSD U100 252GB, 10.51.02, max UDMA/133
- [ 3.341340] ata1.00: 492187500 sectors, multi 1: LBA48 NCQ (depth 31/32)
- [ 3.343283] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
- [ 3.344941] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
- [ 3.344957] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
- [ 3.346668] ata1.00: configured for UDMA/133
- [ 3.348332] scsi 0:0:0:0: Direct-Access ATA SanDisk SSD U100 10.5 PQ: 0 ANSI: 5
- [ 3.350111] sd 0:0:0:0: [sda] 492187500 512-byte logical blocks: (252 GB/234 GiB)
- [ 3.351800] sd 0:0:0:0: [sda] Write Protect is off
- [ 3.353376] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 3.353396] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 3.355598] sda: sda1 sda2 sda3
- [ 3.357518] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 3.359068] md: Waiting for all devices to be available before autodetect
- [ 3.360620] md: If you don't use raid, use raid=noautodetect
- [ 3.676797] input: PS/2 Generic Mouse as /devices/platform/i8042/serio4/input/input5
- [ 3.681080] md: Autodetecting RAID arrays.
- [ 3.682632] md: Scanned 0 and added 0 devices.
- [ 3.684182] md: autorun ...
- [ 3.685707] md: ... autorun DONE.
- [ 3.687982] EXT3-fs (sda3): error: couldn't mount because of unsupported optional features (240)
- [ 3.689787] EXT2-fs (sda3): error: couldn't mount because of unsupported optional features (244)
- [ 3.695685] EXT4-fs (sda3): INFO: recovery required on readonly filesystem
- [ 3.697188] EXT4-fs (sda3): write access will be enabled during recovery
- [ 3.766813] EXT4-fs (sda3): orphan cleanup on readonly fs
- [ 3.768316] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 2621455
- [ 3.768338] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 14155779
- [ 3.768348] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 2621453
- [ 3.768354] EXT4-fs (sda3): 3 orphan inodes deleted
- [ 3.769842] EXT4-fs (sda3): recovery complete
- [ 3.798617] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
- [ 3.800148] VFS: Mounted root (ext4 filesystem) readonly on device 8:3.
- [ 3.802160] Freeing unused kernel memory: 536k freed
- [ 4.570780] systemd-udevd[880]: starting version 200
- [ 4.651417] processor: disagrees about version of symbol module_layout
- [ 4.651419] processor: disagrees about version of symbol module_layout
- [ 4.651480] processor: disagrees about version of symbol module_layout
- [ 4.651481] processor: disagrees about version of symbol module_layout
- [ 4.651576] processor: disagrees about version of symbol module_layout
- [ 4.652124] processor: disagrees about version of symbol module_layout
- [ 4.652847] processor: disagrees about version of symbol module_layout
- [ 4.652990] processor: disagrees about version of symbol module_layout
- [ 4.656760] ac: disagrees about version of symbol module_layout
- [ 4.657417] battery: disagrees about version of symbol module_layout
- [ 4.659247] i2c_i801: disagrees about version of symbol module_layout
- [ 4.662201] usbcore: disagrees about version of symbol module_layout
- [ 4.662203] usbcore: disagrees about version of symbol module_layout
- [ 4.662206] usbcore: disagrees about version of symbol module_layout
- [ 4.662427] evdev: disagrees about version of symbol module_layout
- [ 4.668580] evdev: disagrees about version of symbol module_layout
- [ 4.669289] evdev: disagrees about version of symbol module_layout
- [ 4.672834] evdev: disagrees about version of symbol module_layout
- [ 4.673191] wmi: disagrees about version of symbol module_layout
- [ 4.673441] thermal: disagrees about version of symbol module_layout
- [ 4.683184] rfkill: disagrees about version of symbol module_layout
- [ 4.692082] pcspkr: disagrees about version of symbol module_layout
- [ 4.693569] evdev: disagrees about version of symbol module_layout
- [ 4.694364] evdev: disagrees about version of symbol module_layout
- [ 4.698487] microcode: disagrees about version of symbol module_layout
- [ 4.698840] microcode: disagrees about version of symbol module_layout
- [ 4.698882] microcode: disagrees about version of symbol module_layout
- [ 4.698937] microcode: disagrees about version of symbol module_layout
- [ 4.706835] kvm: disagrees about version of symbol module_layout
- [ 4.706836] kvm: disagrees about version of symbol module_layout
- [ 4.706838] kvm: disagrees about version of symbol module_layout
- [ 4.706976] kvm: disagrees about version of symbol module_layout
- [ 4.709185] coretemp: disagrees about version of symbol module_layout
- [ 4.709188] coretemp: disagrees about version of symbol module_layout
- [ 4.709190] coretemp: disagrees about version of symbol module_layout
- [ 4.709201] coretemp: disagrees about version of symbol module_layout
- [ 4.709755] processor: disagrees about version of symbol module_layout
- [ 4.709760] processor: disagrees about version of symbol module_layout
- [ 4.709878] processor: disagrees about version of symbol module_layout
- [ 4.709888] processor: disagrees about version of symbol module_layout
- [ 5.567558] EXT4-fs (sda3): re-mounted. Opts: (null)
- [ 5.876958] Adding 3999740k swap on /dev/sda2. Priority:-1 extents:1 across:3999740k SS
- [ 7.141624] usbcore: disagrees about version of symbol module_layout
- [ 28.280]
- X.Org X Server 1.13.4
- Release Date: 2013-04-17
- [ 28.280] X Protocol Version 11, Revision 0
- [ 28.280] Build Operating System: Linux 3.8.13-gentoo x86_64 Gentoo
- [ 28.280] Current Operating System: Linux Dm3Ch-UX31A 3.8.13-gentoo #13 SMP Thu Jun 27 05:11:56 MSK 2013 x86_64
- [ 28.280] Kernel command line: root=/dev/sda3
- [ 28.280] Build Date: 27 June 2013 01:27:26AM
- [ 28.280]
- [ 28.280] Current version of pixman: 0.28.0
- [ 28.281] Before reporting problems, check http://wiki.x.org
- to make sure that you have the latest version.
- [ 28.281] Markers: (--) probed, (**) from config file, (==) default setting,
- (++) from command line, (!!) notice, (II) informational,
- (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
- [ 28.281] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 28 01:29:00 2013
- [ 28.282] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
- [ 28.283] (==) No Layout section. Using the first Screen section.
- [ 28.283] (==) No screen section available. Using defaults.
- [ 28.283] (**) |-->Screen "Default Screen Section" (0)
- [ 28.283] (**) | |-->Monitor "<default monitor>"
- [ 28.283] (==) No monitor specified for screen "Default Screen Section".
- Using a default monitor configuration.
- [ 28.283] (==) Automatically adding devices
- [ 28.283] (==) Automatically enabling devices
- [ 28.283] (==) Automatically adding GPU devices
- [ 28.293] (==) FontPath set to:
- /usr/share/fonts/misc/,
- /usr/share/fonts/TTF/,
- /usr/share/fonts/OTF/,
- /usr/share/fonts/Type1/,
- /usr/share/fonts/100dpi/,
- /usr/share/fonts/75dpi/
- [ 28.293] (==) ModulePath set to "/usr/lib64/xorg/modules"
- [ 28.293] (II) The server relies on udev to provide the list of input devices.
- If no devices become available, reconfigure udev or disable AutoAddDevices.
- [ 28.294] (II) Loader magic: 0x809c00
- [ 28.294] (II) Module ABI versions:
- [ 28.294] X.Org ANSI C Emulation: 0.4
- [ 28.294] X.Org Video Driver: 13.1
- [ 28.294] X.Org XInput driver : 18.0
- [ 28.294] X.Org Server Extension : 7.0
- [ 28.294] (II) config/udev: Adding drm device (/dev/dri/card0)
- [ 28.295] (--) PCI:*(0:0:2:0) 8086:0166:1043:1517 rev 9, Mem @ 0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64
- [ 28.295] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
- [ 28.296] Initializing built-in extension Generic Event Extension
- [ 28.296] Initializing built-in extension SHAPE
- [ 28.296] Initializing built-in extension MIT-SHM
- [ 28.296] Initializing built-in extension XInputExtension
- [ 28.296] Initializing built-in extension XTEST
- [ 28.296] Initializing built-in extension BIG-REQUESTS
- [ 28.296] Initializing built-in extension SYNC
- [ 28.296] Initializing built-in extension XKEYBOARD
- [ 28.296] Initializing built-in extension XC-MISC
- [ 28.296] Initializing built-in extension XINERAMA
- [ 28.296] Initializing built-in extension XFIXES
- [ 28.296] Initializing built-in extension RENDER
- [ 28.296] Initializing built-in extension RANDR
- [ 28.296] Initializing built-in extension COMPOSITE
- [ 28.296] Initializing built-in extension DAMAGE
- [ 28.296] Initializing built-in extension MIT-SCREEN-SAVER
- [ 28.296] Initializing built-in extension DOUBLE-BUFFER
- [ 28.297] Initializing built-in extension RECORD
- [ 28.297] Initializing built-in extension DPMS
- [ 28.297] Initializing built-in extension X-Resource
- [ 28.297] Initializing built-in extension XVideo
- [ 28.297] Initializing built-in extension XVideo-MotionCompensation
- [ 28.297] Initializing built-in extension XFree86-VidModeExtension
- [ 28.297] Initializing built-in extension XFree86-DGA
- [ 28.297] Initializing built-in extension XFree86-DRI
- [ 28.297] Initializing built-in extension DRI2
- [ 28.297] (II) LoadModule: "glx"
- [ 28.298] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
- [ 28.301] (II) Module glx: vendor="X.Org Foundation"
- [ 28.301] compiled for 1.13.4, module version = 1.0.0
- [ 28.301] ABI class: X.Org Server Extension, version 7.0
- [ 28.301] (==) AIGLX enabled
- [ 28.301] Loading extension GLX
- [ 28.301] (==) Matched intel as autoconfigured driver 0
- [ 28.301] (==) Matched intel as autoconfigured driver 1
- [ 28.301] (==) Matched vesa as autoconfigured driver 2
- [ 28.301] (==) Matched modesetting as autoconfigured driver 3
- [ 28.301] (==) Matched fbdev as autoconfigured driver 4
- [ 28.301] (==) Assigned the driver to the xf86ConfigLayout
- [ 28.301] (II) LoadModule: "intel"
- [ 28.301] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
- [ 28.308] (II) Module intel: vendor="X.Org Foundation"
- [ 28.308] compiled for 1.13.4, module version = 2.20.13
- [ 28.308] Module class: X.Org Video Driver
- [ 28.308] ABI class: X.Org Video Driver, version 13.1
- [ 28.308] (II) LoadModule: "vesa"
- [ 28.308] (WW) Warning, couldn't open module vesa
- [ 28.308] (II) UnloadModule: "vesa"
- [ 28.308] (II) Unloading vesa
- [ 28.308] (EE) Failed to load module "vesa" (module does not exist, 0)
- [ 28.308] (II) LoadModule: "modesetting"
- [ 28.308] (WW) Warning, couldn't open module modesetting
- [ 28.308] (II) UnloadModule: "modesetting"
- [ 28.308] (II) Unloading modesetting
- [ 28.308] (EE) Failed to load module "modesetting" (module does not exist, 0)
- [ 28.308] (II) LoadModule: "fbdev"
- [ 28.308] (WW) Warning, couldn't open module fbdev
- [ 28.308] (II) UnloadModule: "fbdev"
- [ 28.308] (II) Unloading fbdev
- [ 28.308] (EE) Failed to load module "fbdev" (module does not exist, 0)
- [ 28.308] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
- i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
- E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
- 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
- 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
- Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
- Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
- Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
- Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
- Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
- Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
- Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
- Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
- Haswell Server (GT2+), Haswell SDV Desktop (GT1),
- Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
- Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
- Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
- Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
- Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
- Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
- Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
- Haswell ULT Server (GT1), Haswell ULT Server (GT2),
- Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
- Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
- Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
- Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
- Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
- ValleyView PO board
- [ 28.309] (--) using VT number 7
- [ 28.318] (II) intel(0): using device path '/dev/dri/card0'
- [ 28.319] (II) intel(0): Creating default Display subsection in Screen section
- "Default Screen Section" for depth/fbbpp 24/32
- [ 28.319] (==) intel(0): Depth 24, (--) framebuffer bpp 32
- [ 28.319] (==) intel(0): RGB weight 888
- [ 28.319] (==) intel(0): Default visual is TrueColor
- [ 28.319] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
- [ 28.319] (**) intel(0): Framebuffer tiled
- [ 28.319] (**) intel(0): Pixmaps tiled
- [ 28.319] (**) intel(0): 3D buffers tiled
- [ 28.319] (**) intel(0): Throttling enabled
- [ 28.319] (**) intel(0): Delayed flush enabled
- [ 28.319] (**) intel(0): "Tear free" disabled
- [ 28.319] (**) intel(0): Forcing per-crtc-pixmaps? no
- [ 28.319] (II) intel(0): Output eDP1 has no monitor section
- [ 28.320] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
- [ 28.360] (II) intel(0): Output VGA1 has no monitor section
- [ 28.400] (II) intel(0): Output HDMI1 has no monitor section
- [ 28.520] (II) intel(0): Output DP1 has no monitor section
- [ 28.520] (II) intel(0): EDID for output eDP1
- [ 28.520] (II) intel(0): Manufacturer: CMN Model: 1343 Serial#: 0
- [ 28.520] (II) intel(0): Year: 2011 Week: 52
- [ 28.520] (II) intel(0): EDID Version: 1.4
- [ 28.520] (II) intel(0): Digital Display Input
- [ 28.520] (II) intel(0): 8 bits per channel
- [ 28.520] (II) intel(0): Digital interface is DisplayPort
- [ 28.520] (II) intel(0): Max Image Size [cm]: horiz.: 28 vert.: 16
- [ 28.520] (II) intel(0): Gamma: 2.20
- [ 28.520] (II) intel(0): No DPMS capabilities specified
- [ 28.520] (II) intel(0): Supported color encodings: RGB 4:4:4
- [ 28.520] (II) intel(0): First detailed timing is preferred mode
- [ 28.520] (II) intel(0): Preferred mode is native pixel format and refresh rate
- [ 28.520] (II) intel(0): redX: 0.662 redY: 0.325 greenX: 0.297 greenY: 0.589
- [ 28.520] (II) intel(0): blueX: 0.146 blueY: 0.068 whiteX: 0.312 whiteY: 0.325
- [ 28.520] (II) intel(0): Manufacturer's mask: 0
- [ 28.520] (II) intel(0): Supported detailed timing:
- [ 28.520] (II) intel(0): clock: 138.8 MHz Image Size: 282 x 165 mm
- [ 28.520] (II) intel(0): h_active: 1920 h_sync: 1966 h_sync_end 1996 h_blank_end 2080 h_border: 0
- [ 28.520] (II) intel(0): v_active: 1080 v_sync: 1082 v_sync_end 1086 v_blanking: 1112 v_border: 0
- [ 28.520] (II) intel(0): Supported detailed timing:
- [ 28.520] (II) intel(0): clock: 92.5 MHz Image Size: 282 x 165 mm
- [ 28.520] (II) intel(0): h_active: 1920 h_sync: 1966 h_sync_end 1996 h_blank_end 2080 h_border: 0
- [ 28.520] (II) intel(0): v_active: 1080 v_sync: 1082 v_sync_end 1086 v_blanking: 1112 v_border: 0
- [ 28.520] (II) intel(0): CMN
- [ 28.520] (II) intel(0): N133HSE-EA1
- [ 28.520] (II) intel(0): EDID (in hex):
- [ 28.520] (II) intel(0): 00ffffffffffff000dae431300000000
- [ 28.520] (II) intel(0): 34150104a51c10780293ada9534c9625
- [ 28.520] (II) intel(0): 114f5300000001010101010101010101
- [ 28.520] (II) intel(0): 010101010101363680a0703820402e1e
- [ 28.520] (II) intel(0): 24001aa510000018242480a070382040
- [ 28.520] (II) intel(0): 2e1e24001aa510000018000000fe0043
- [ 28.520] (II) intel(0): 4d4e0a202020202020202020000000fe
- [ 28.520] (II) intel(0): 004e3133334853452d4541310a2000cd
- [ 28.520] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
- [ 28.520] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
- [ 28.520] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
- [ 28.520] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
- [ 28.520] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
- [ 28.520] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
- [ 28.520] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
- [ 28.520] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
- [ 28.520] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
- [ 28.520] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
- [ 28.520] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
- [ 28.520] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
- [ 28.520] (II) intel(0): Printing probed modes for output eDP1
- [ 28.520] (II) intel(0): Modeline "1920x1080"x60.0 138.78 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (66.7 kHz eP)
- [ 28.520] (II) intel(0): Modeline "1920x1080"x40.0 92.52 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (44.5 kHz e)
- [ 28.520] (II) intel(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
- [ 28.520] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
- [ 28.520] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
- [ 28.520] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
- [ 28.520] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
- [ 28.520] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
- [ 28.520] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
- [ 28.560] (II) intel(0): EDID for output VGA1
- [ 28.600] (II) intel(0): EDID for output HDMI1
- [ 28.720] (II) intel(0): EDID for output DP1
- [ 28.720] (II) intel(0): Output eDP1 connected
- [ 28.720] (II) intel(0): Output VGA1 disconnected
- [ 28.720] (II) intel(0): Output HDMI1 disconnected
- [ 28.720] (II) intel(0): Output DP1 disconnected
- [ 28.720] (II) intel(0): Using exact sizes for initial modes
- [ 28.720] (II) intel(0): Output eDP1 using initial mode 1920x1080
- [ 28.720] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
- [ 28.720] (==) intel(0): DPI set to (96, 96)
- [ 28.720] (II) Loading sub module "dri2"
- [ 28.720] (II) LoadModule: "dri2"
- [ 28.720] (II) Module "dri2" already built-in
- [ 28.720] (==) Depth 24 pixmap format is 32 bpp
- [ 28.723] (II) intel(0): SNA initialized with IvyBridge backend
- [ 28.723] (==) intel(0): Backing store disabled
- [ 28.723] (==) intel(0): Silken mouse enabled
- [ 28.723] (II) intel(0): HW Cursor enabled
- [ 28.723] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
- [ 28.725] (==) intel(0): DPMS enabled
- [ 28.726] (II) intel(0): [DRI2] Setup complete
- [ 28.726] (II) intel(0): [DRI2] DRI driver: i965
- [ 28.726] (II) intel(0): direct rendering: DRI2 Enabled
- [ 28.726] (==) intel(0): hotplug detection: "enabled"
- [ 28.726] (--) RandR disabled
- [ 28.769] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
- [ 28.769] (II) AIGLX: enabled GLX_INTEL_swap_event
- [ 28.769] (II) AIGLX: enabled GLX_ARB_create_context
- [ 28.769] (II) AIGLX: enabled GLX_ARB_create_context_profile
- [ 28.769] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
- [ 28.769] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
- [ 28.769] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
- [ 28.769] (II) AIGLX: Loaded and initialized i965
- [ 28.769] (II) GLX: Initialized DRI2 GL provider for screen 0
- [ 28.769] (II) intel(0): switch to mode 1920x1080 on crtc 3 (pipe 0)
- [ 28.800] (II) intel(0): Setting screen physical size to 508 x 285
- [ 28.965] (II) config/udev: Adding drm device (/dev/dri/card0)
- [ 28.966] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse0)
- [ 28.966] (II) No input driver specified, ignoring this device.
- [ 28.966] (II) This device may have been added with another device file.
- [ 31.260] (II) intel(0): EDID vendor "CMN", prod id 4931
- [ 31.260] (II) intel(0): Printing DDC gathered Modelines:
- [ 31.260] (II) intel(0): Modeline "1920x1080"x0.0 138.78 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (66.7 kHz eP)
- [ 31.260] (II) intel(0): Modeline "1920x1080"x0.0 92.52 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (44.5 kHz e)
- [ 33.251] (II) intel(0): EDID vendor "CMN", prod id 4931
- [ 33.251] (II) intel(0): Printing DDC gathered Modelines:
- [ 33.251] (II) intel(0): Modeline "1920x1080"x0.0 138.78 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (66.7 kHz eP)
- [ 33.251] (II) intel(0): Modeline "1920x1080"x0.0 92.52 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (44.5 kHz e)
- [ 0.000210] pid_max: default: 32768 minimum: 301
- [ 0.000350] Mount-cache hash table entries: 256
- [ 0.000606] Initializing cgroup subsys cpuacct
- [ 0.000734] CPU: Physical Processor ID: 0
- [ 0.000834] CPU: Processor Core ID: 0
- [ 0.000936] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
- ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
- [ 0.001584] mce: CPU supports 7 MCE banks
- [ 0.001695] CPU0: Thermal monitoring enabled (TM1)
- [ 0.001805] process: using mwait in idle threads
- [ 0.001910] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
- Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
- tlb_flushall_shift: 1
- [ 0.002299] Freeing SMP alternatives: 24k freed
- [ 0.002409] ACPI: Core revision 20121018
- [ 0.017730] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.117689] smpboot: CPU0: Intel(R) Core(TM) i7-3517U CPU @ 1.90GHz (fam: 06, model: 3a, stepping: 09)
- [ 0.117983] TSC deadline timer enabled
- [ 0.117987] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, Intel PMU driver.
- [ 0.118278] ... version: 3
- [ 0.118377] ... bit width: 48
- [ 0.118477] ... generic registers: 4
- [ 0.118576] ... value mask: 0000ffffffffffff
- [ 0.118677] ... max period: 000000007fffffff
- [ 0.118779] ... fixed-purpose events: 3
- [ 0.118878] ... event mask: 000000070000000f
- [ 0.119160] smpboot: Booting Node 0, Processors #1 #2 #3 OK
- [ 0.160830] Brought up 4 CPUs
- [ 0.160934] smpboot: Total of 4 processors activated (19155.98 BogoMIPS)
- [ 0.165373] devtmpfs: initialized
- [ 0.165656] PM: Registering ACPI NVS region [mem 0xd97cf000-0xd9dcffff] (6295552 bytes)
- [ 0.165864] PM: Registering ACPI NVS region [mem 0xda64d000-0xda8ccfff] (2621440 bytes)
- [ 0.166011] PM: Registering ACPI NVS region [mem 0xda8d3000-0xda915fff] (274432 bytes)
- [ 0.166301] regulator-dummy: no parameters
- [ 0.166485] NET: Registered protocol family 16
- [ 0.166891] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
- [ 0.167000] ACPI: bus type pci registered
- [ 0.167224] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
- [ 0.167383] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
- [ 0.182249] PCI: Using configuration type 1 for base access
- [ 0.186871] bio: create slab <bio-0> at 0
- [ 0.187099] ACPI: Added _OSI(Module Device)
- [ 0.187201] ACPI: Added _OSI(Processor Device)
- [ 0.187300] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.187401] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.190093] ACPI: EC: EC description table is found, configuring boot EC
- [ 0.192847] ACPI: Executed 1 blocks of module-level executable AML code
- [ 0.228063] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
- [ 0.288318] ACPI: SSDT 00000000da5fa018 00853 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
- [ 0.289171] ACPI: Dynamic OEM Table Load:
- [ 0.289365] ACPI: SSDT (null) 00853 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
- [ 0.318074] ACPI: SSDT 00000000da5fba98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
- [ 0.318956] ACPI: Dynamic OEM Table Load:
- [ 0.319152] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
- [ 0.347882] ACPI: SSDT 00000000da5fcc18 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
- [ 0.348724] ACPI: Dynamic OEM Table Load:
- [ 0.348917] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
- [ 0.378499] ACPI: Interpreter enabled
- [ 0.378605] ACPI: (supports S0 S3 S4 S5)
- [ 0.378915] ACPI: Using IOAPIC for interrupt routing
- [ 0.429780] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
- [ 0.429940] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 0.430369] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
- [ 0.430474] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 0.431393] PCI host bridge to bus 0000:00
- [ 0.431499] pci_bus 0000:00: root bus resource [bus 00-3e]
- [ 0.431604] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
- [ 0.431707] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
- [ 0.431811] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
- [ 0.431916] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
- [ 0.432019] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
- [ 0.432123] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
- [ 0.432229] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
- [ 0.432333] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
- [ 0.432438] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
- [ 0.432544] pci_bus 0000:00: root bus resource [mem 0xdfe00000-0xfeafffff]
- [ 0.432660] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
- [ 0.432707] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
- [ 0.432721] pci 0000:00:02.0: reg 10: [mem 0xf7800000-0xf7bfffff 64bit]
- [ 0.432729] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
- [ 0.432735] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]
- [ 0.432777] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
- [ 0.432789] pci 0000:00:04.0: reg 10: [mem 0xfed98000-0xfed9ffff 64bit]
- [ 0.432864] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
- [ 0.432890] pci 0000:00:14.0: reg 10: [mem 0xf7d00000-0xf7d0ffff 64bit]
- [ 0.432971] pci 0000:00:14.0: PME# supported from D3hot D3cold
- [ 0.432999] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
- [ 0.433021] pci 0000:00:16.0: reg 10: [mem 0xf7d22000-0xf7d2200f 64bit]
- [ 0.433094] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
- [ 0.433134] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
- [ 0.433158] pci 0000:00:1a.0: reg 10: [mem 0xf7d20000-0xf7d203ff]
- [ 0.433259] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
- [ 0.433291] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
- [ 0.433309] pci 0000:00:1b.0: reg 10: [mem 0xf7d18000-0xf7d1bfff 64bit]
- [ 0.433388] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- [ 0.433417] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
- [ 0.433548] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- [ 0.433587] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
- [ 0.433717] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
- [ 0.433763] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
- [ 0.433788] pci 0000:00:1d.0: reg 10: [mem 0xf7d1f000-0xf7d1f3ff]
- [ 0.433889] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
- [ 0.433918] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
- [ 0.434057] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
- [ 0.434080] pci 0000:00:1f.2: reg 10: [io 0xf0b0-0xf0b7]
- [ 0.434089] pci 0000:00:1f.2: reg 14: [io 0xf0a0-0xf0a3]
- [ 0.434098] pci 0000:00:1f.2: reg 18: [io 0xf090-0xf097]
- [ 0.434107] pci 0000:00:1f.2: reg 1c: [io 0xf080-0xf083]
- [ 0.434116] pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f]
- [ 0.434125] pci 0000:00:1f.2: reg 24: [mem 0xf7d1e000-0xf7d1e7ff]
- [ 0.434178] pci 0000:00:1f.2: PME# supported from D3hot
- [ 0.434202] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
- [ 0.434220] pci 0000:00:1f.3: reg 10: [mem 0xf7d1d000-0xf7d1d0ff 64bit]
- [ 0.434244] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f]
- [ 0.434287] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
- [ 0.434310] pci 0000:00:1f.6: reg 10: [mem 0xf7d1c000-0xf7d1cfff 64bit]
- [ 0.434461] pci 0000:00:1c.0: PCI bridge to [bus 01]
- [ 0.434810] pci 0000:02:00.0: [8086:088e] type 00 class 0x028000
- [ 0.434972] pci 0000:02:00.0: reg 10: [mem 0xf7c00000-0xf7c01fff 64bit]
- [ 0.435632] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
- [ 0.447766] pci 0000:00:1c.1: PCI bridge to [bus 02]
- [ 0.447877] pci 0000:00:1c.1: bridge window [mem 0xf7c00000-0xf7cfffff]
- [ 0.447903] pci_bus 0000:00: on NUMA node 0
- [ 0.447944] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
- [ 0.447989] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
- [ 0.448163] pci0000:00: Requesting ACPI _OSC control (0x1d)
- [ 0.448528] pci0000:00: ACPI _OSC control (0x18) granted
- [ 0.450034] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
- [ 0.450630] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 12)
- [ 0.451176] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 12)
- [ 0.451719] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 12)
- [ 0.452266] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
- [ 0.452903] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
- [ 0.453537] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 12)
- [ 0.454085] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 10 12)
- [ 0.454707] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.454811] vgaarb: loaded
- [ 0.454905] vgaarb: bridge control possible 0000:00:02.0
- [ 0.455149] SCSI subsystem initialized
- [ 0.455247] ACPI: bus type scsi registered
- [ 0.455423] libata version 3.00 loaded.
- [ 0.455591] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.455690] PCI: Using ACPI for IRQ routing
- [ 0.457556] PCI: pci_cache_line_size set to 64 bytes
- [ 0.457564] pci 0000:00:04.0: no compatible bridge window for [mem 0xfed98000-0xfed9ffff 64bit]
- [ 0.457782] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
- [ 0.457784] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
- [ 0.457786] e820: reserve RAM buffer [mem 0xd97cf000-0xdbffffff]
- [ 0.457793] e820: reserve RAM buffer [mem 0xd9dea000-0xdbffffff]
- [ 0.457801] e820: reserve RAM buffer [mem 0xd9df2000-0xdbffffff]
- [ 0.457808] e820: reserve RAM buffer [mem 0xd9f50000-0xdbffffff]
- [ 0.457815] e820: reserve RAM buffer [mem 0xd9f93000-0xdbffffff]
- [ 0.457822] e820: reserve RAM buffer [mem 0xd9f9c000-0xdbffffff]
- [ 0.457829] e820: reserve RAM buffer [mem 0xd9fbe000-0xdbffffff]
- [ 0.457836] e820: reserve RAM buffer [mem 0xd9fd7000-0xdbffffff]
- [ 0.457842] e820: reserve RAM buffer [mem 0xd9fe5000-0xdbffffff]
- [ 0.457848] e820: reserve RAM buffer [mem 0xd9ff5000-0xdbffffff]
- [ 0.457854] e820: reserve RAM buffer [mem 0xda001000-0xdbffffff]
- [ 0.457859] e820: reserve RAM buffer [mem 0xda025000-0xdbffffff]
- [ 0.457864] e820: reserve RAM buffer [mem 0xda03c000-0xdbffffff]
- [ 0.457869] e820: reserve RAM buffer [mem 0xda04f000-0xdbffffff]
- [ 0.457874] e820: reserve RAM buffer [mem 0xda089000-0xdbffffff]
- [ 0.457878] e820: reserve RAM buffer [mem 0xda08b000-0xdbffffff]
- [ 0.457882] e820: reserve RAM buffer [mem 0xda08e000-0xdbffffff]
- [ 0.457885] e820: reserve RAM buffer [mem 0xda0a9000-0xdbffffff]
- [ 0.457889] e820: reserve RAM buffer [mem 0xda8d3000-0xdbffffff]
- [ 0.457891] e820: reserve RAM buffer [mem 0xdad29000-0xdbffffff]
- [ 0.457893] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
- [ 0.457895] e820: reserve RAM buffer [mem 0x11f200000-0x11fffffff]
- [ 0.458090] Switching to clocksource hpet
- [ 0.462467] pnp: PnP ACPI init
- [ 0.462576] ACPI: bus type pnp registered
- [ 0.462785] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
- [ 0.462889] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.462952] pnp 00:01: [dma 4]
- [ 0.463006] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
- [ 0.463066] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
- [ 0.463218] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
- [ 0.463296] system 00:04: [io 0x0680-0x069f] has been reserved
- [ 0.463397] system 00:04: [io 0x1000-0x100f] has been reserved
- [ 0.463498] system 00:04: [io 0xffff] has been reserved
- [ 0.463597] system 00:04: [io 0xffff] has been reserved
- [ 0.463696] system 00:04: [io 0x0400-0x0453] has been reserved
- [ 0.463796] system 00:04: [io 0x0458-0x047f] has been reserved
- [ 0.463896] system 00:04: [io 0x0500-0x057f] has been reserved
- [ 0.463998] system 00:04: [io 0x164e-0x164f] has been reserved
- [ 0.464098] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.464165] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.464257] system 00:06: [io 0x0454-0x0457] has been reserved
- [ 0.464358] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
- [ 0.464450] system 00:07: [io 0x04d0-0x04d1] has been reserved
- [ 0.464553] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.464618] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
- [ 0.464726] pnp 00:09: Plug and Play ACPI device, IDs ETD0105 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
- [ 0.464818] pnp 00:0a: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
- [ 0.465099] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
- [ 0.465201] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
- [ 0.465303] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
- [ 0.465403] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
- [ 0.465505] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
- [ 0.465607] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
- [ 0.465708] system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved
- [ 0.465810] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
- [ 0.465912] system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
- [ 0.466013] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
- [ 0.466115] system 00:0b: [mem 0xdfe00000-0xdfe00fff] has been reserved
- [ 0.466218] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.466461] system 00:0c: [mem 0x20000000-0x201fffff] has been reserved
- [ 0.466564] system 00:0c: [mem 0x40004000-0x40004fff] has been reserved
- [ 0.466669] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.466717] pnp: PnP ACPI: found 13 devices
- [ 0.466813] ACPI: ACPI bus type pnp unregistered
- [ 0.471535] pci 0000:00:04.0: BAR 0: assigned [mem 0xdfe08000-0xdfe0ffff 64bit]
- [ 0.471643] pci 0000:00:1c.0: PCI bridge to [bus 01]
- [ 0.471753] pci 0000:00:1c.1: PCI bridge to [bus 02]
- [ 0.471857] pci 0000:00:1c.1: bridge window [mem 0xf7c00000-0xf7cfffff]
- [ 0.471989] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
- [ 0.471991] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
- [ 0.471993] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
- [ 0.471995] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
- [ 0.471997] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
- [ 0.471999] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
- [ 0.472000] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
- [ 0.472002] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
- [ 0.472004] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
- [ 0.472006] pci_bus 0000:00: resource 13 [mem 0xdfe00000-0xfeafffff]
- [ 0.472008] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
- [ 0.472073] NET: Registered protocol family 2
- [ 0.472340] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
- [ 0.472521] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
- [ 0.472690] TCP: Hash tables configured (established 32768 bind 32768)
- [ 0.472807] TCP: reno registered
- [ 0.472905] UDP hash table entries: 2048 (order: 4, 65536 bytes)
- [ 0.473017] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
- [ 0.473195] NET: Registered protocol family 1
- [ 0.473303] pci 0000:00:02.0: Boot video device
- [ 0.474597] pci 0000:00:14.0: Configurable ports to enable SuperSpeed: 0xf
- [ 0.474602] pci 0000:00:14.0: USB 3.0 ports that are now enabled under xHCI: 0xf
- [ 0.474606] pci 0000:00:14.0: Configurable USB 2.0 ports to hand over to xCHI: 0xf
- [ 0.474610] pci 0000:00:14.0: USB 2.0 ports that are now switched over to xHCI: 0xf
- [ 0.474653] pci 0000:00:1a.0: EHCI: BIOS handoff
- [ 0.498216] pci 0000:00:1d.0: EHCI: BIOS handoff
- [ 0.518169] PCI: CLS 64 bytes, default 64
- [ 0.518206] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
- [ 0.518308] software IO TLB [mem 0xd57cf000-0xd97cf000] (64MB) mapped at [ffff8800d57cf000-ffff8800d97cefff]
- [ 0.519022] audit: initializing netlink socket (disabled)
- [ 0.519128] type=2000 audit(1372368643.530:1): initialized
- [ 0.519782] VFS: Disk quotas dquot_6.5.2
- [ 0.519903] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.520265] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.520403] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
- [ 0.520758] OCFS2 1.5.0
- [ 0.520907] ocfs2: Registered cluster interface o2cb
- [ 0.521006] OCFS2 DLMFS 1.5.0
- [ 0.521132] OCFS2 User DLM kernel interface loaded
- [ 0.521232] OCFS2 Node Manager 1.5.0
- [ 0.521425] OCFS2 DLM 1.5.0
- [ 0.521711] GFS2 installed
- [ 0.521809] msgmni has been set to 7687
- [ 0.522152] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
- [ 0.522254] io scheduler noop registered
- [ 0.522351] io scheduler deadline registered
- [ 0.522463] io scheduler cfq registered (default)
- [ 0.522926] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.523712] Linux agpgart interface v0.103
- [ 0.524150] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
- [ 0.528272] ACPI: Lid Switch [LID]
- [ 0.528446] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
- [ 0.528552] ACPI: Power Button [PWRB]
- [ 0.528719] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
- [ 0.528826] ACPI: Sleep Button [SLPB]
- [ 0.530380] [drm] Initialized drm 1.1.0 20060810
- [ 0.531183] [drm] Memory usable by graphics device = 2048M
- [ 0.531286] i915 0000:00:02.0: setting latency timer to 64
- [ 0.598129] i915 0000:00:02.0: irq 40 for MSI/MSI-X
- [ 0.598137] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
- [ 0.598238] [drm] Driver supports precise vblank timestamp query.
- [ 0.598374] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
- [ 0.756235] fbcon: inteldrmfb (fb0) is primary device
- [ 1.516659] tsc: Refined TSC clocksource calibration: 2394.560 MHz
- [ 1.516662] Switching to clocksource tsc
- [ 1.996286] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
- [ 2.841474] Console: switching to colour frame buffer device 240x67
- [ 2.849534] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
- [ 2.849569] i915 0000:00:02.0: registered panic notifier
- [ 2.904930] acpi device:27: registered as cooling_device0
- [ 2.984509] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
- [ 2.984622] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
- [ 2.984714] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
- [ 2.986592] brd: module loaded
- [ 2.987554] loop: module loaded
- [ 2.987576] Uniform Multi-Platform E-IDE driver
- [ 2.987657] ide-gd driver 1.18
- [ 2.987854] Loading iSCSI transport class v2.0-870.
- [ 2.988170] isci: Intel(R) C600 SAS Controller Driver - version 1.1.0
- [ 2.988241] GDT-HA: Storage RAID Controller Driver. Version: 3.05
- [ 2.988406] ahci 0000:00:1f.2: version 3.0
- [ 2.988465] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
- [ 2.988521] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
- [ 2.988570] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
- [ 2.988617] ahci 0000:00:1f.2: setting latency timer to 64
- [ 2.989527] scsi0 : ahci
- [ 2.989651] scsi1 : ahci
- [ 2.989760] scsi2 : ahci
- [ 2.989866] scsi3 : ahci
- [ 2.989973] scsi4 : ahci
- [ 2.990078] scsi5 : ahci
- [ 2.990175] ata1: SATA max UDMA/133 abar m2048@0xf7d1e000 port 0xf7d1e100 irq 41
- [ 2.990217] ata2: DUMMY
- [ 2.990228] ata3: DUMMY
- [ 2.990238] ata4: DUMMY
- [ 2.990249] ata5: DUMMY
- [ 2.990260] ata6: DUMMY
- [ 2.990527] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
- [ 2.992999] i8042: Detected active multiplexing controller, rev 1.1
- [ 2.993809] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 2.993839] serio: i8042 AUX0 port at 0x60,0x64 irq 12
- [ 2.993867] serio: i8042 AUX1 port at 0x60,0x64 irq 12
- [ 2.993895] serio: i8042 AUX2 port at 0x60,0x64 irq 12
- [ 2.993923] serio: i8042 AUX3 port at 0x60,0x64 irq 12
- [ 2.994135] mousedev: PS/2 mouse device common for all mice
- [ 2.994274] cpuidle: using governor ladder
- [ 2.994296] cpuidle: using governor menu
- [ 2.994558] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
- [ 3.008223] TCP: cubic registered
- [ 3.009856] NET: Registered protocol family 17
- [ 3.011884] PM: Hibernation image not present or could not be loaded.
- [ 3.011892] registered taskstats version 1
- [ 3.013881] ALSA device list:
- [ 3.015482] #0: HDA Intel PCH at 0xf7d18000 irq 42
- [ 3.028698] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
- [ 3.333946] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 3.335935] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
- [ 3.337793] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
- [ 3.337808] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
- [ 3.339715] ata1.00: ATA-9: SanDisk SSD U100 252GB, 10.51.02, max UDMA/133
- [ 3.341340] ata1.00: 492187500 sectors, multi 1: LBA48 NCQ (depth 31/32)
- [ 3.343283] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
- [ 3.344941] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
- [ 3.344957] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
- [ 3.346668] ata1.00: configured for UDMA/133
- [ 3.348332] scsi 0:0:0:0: Direct-Access ATA SanDisk SSD U100 10.5 PQ: 0 ANSI: 5
- [ 3.350111] sd 0:0:0:0: [sda] 492187500 512-byte logical blocks: (252 GB/234 GiB)
- [ 3.351800] sd 0:0:0:0: [sda] Write Protect is off
- [ 3.353376] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 3.353396] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 3.355598] sda: sda1 sda2 sda3
- [ 3.357518] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 3.359068] md: Waiting for all devices to be available before autodetect
- [ 3.360620] md: If you don't use raid, use raid=noautodetect
- [ 3.676797] input: PS/2 Generic Mouse as /devices/platform/i8042/serio4/input/input5
- [ 3.681080] md: Autodetecting RAID arrays.
- [ 3.682632] md: Scanned 0 and added 0 devices.
- [ 3.684182] md: autorun ...
- [ 3.685707] md: ... autorun DONE.
- [ 3.687982] EXT3-fs (sda3): error: couldn't mount because of unsupported optional features (240)
- [ 3.689787] EXT2-fs (sda3): error: couldn't mount because of unsupported optional features (244)
- [ 3.695685] EXT4-fs (sda3): INFO: recovery required on readonly filesystem
- [ 3.697188] EXT4-fs (sda3): write access will be enabled during recovery
- [ 3.766813] EXT4-fs (sda3): orphan cleanup on readonly fs
- [ 3.768316] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 2621455
- [ 3.768338] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 14155779
- [ 3.768348] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 2621453
- [ 3.768354] EXT4-fs (sda3): 3 orphan inodes deleted
- [ 3.769842] EXT4-fs (sda3): recovery complete
- [ 3.798617] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
- [ 3.800148] VFS: Mounted root (ext4 filesystem) readonly on device 8:3.
- [ 3.802160] Freeing unused kernel memory: 536k freed
- [ 4.570780] systemd-udevd[880]: starting version 200
- [ 4.651417] processor: disagrees about version of symbol module_layout
- [ 4.651419] processor: disagrees about version of symbol module_layout
- [ 4.651480] processor: disagrees about version of symbol module_layout
- [ 4.651481] processor: disagrees about version of symbol module_layout
- [ 4.651576] processor: disagrees about version of symbol module_layout
- [ 4.652124] processor: disagrees about version of symbol module_layout
- [ 4.652847] processor: disagrees about version of symbol module_layout
- [ 4.652990] processor: disagrees about version of symbol module_layout
- [ 4.656760] ac: disagrees about version of symbol module_layout
- [ 4.657417] battery: disagrees about version of symbol module_layout
- [ 4.659247] i2c_i801: disagrees about version of symbol module_layout
- [ 4.662201] usbcore: disagrees about version of symbol module_layout
- [ 4.662203] usbcore: disagrees about version of symbol module_layout
- [ 4.662206] usbcore: disagrees about version of symbol module_layout
- [ 4.662427] evdev: disagrees about version of symbol module_layout
- [ 4.668580] evdev: disagrees about version of symbol module_layout
- [ 4.669289] evdev: disagrees about version of symbol module_layout
- [ 4.672834] evdev: disagrees about version of symbol module_layout
- [ 4.673191] wmi: disagrees about version of symbol module_layout
- [ 4.673441] thermal: disagrees about version of symbol module_layout
- [ 4.683184] rfkill: disagrees about version of symbol module_layout
- [ 4.692082] pcspkr: disagrees about version of symbol module_layout
- [ 4.693569] evdev: disagrees about version of symbol module_layout
- [ 4.694364] evdev: disagrees about version of symbol module_layout
- [ 4.698487] microcode: disagrees about version of symbol module_layout
- [ 4.698840] microcode: disagrees about version of symbol module_layout
- [ 4.698882] microcode: disagrees about version of symbol module_layout
- [ 4.698937] microcode: disagrees about version of symbol module_layout
- [ 4.706835] kvm: disagrees about version of symbol module_layout
- [ 4.706836] kvm: disagrees about version of symbol module_layout
- [ 4.706838] kvm: disagrees about version of symbol module_layout
- [ 4.706976] kvm: disagrees about version of symbol module_layout
- [ 4.709185] coretemp: disagrees about version of symbol module_layout
- [ 4.709188] coretemp: disagrees about version of symbol module_layout
- [ 4.709190] coretemp: disagrees about version of symbol module_layout
- [ 4.709201] coretemp: disagrees about version of symbol module_layout
- [ 4.709755] processor: disagrees about version of symbol module_layout
- [ 4.709760] processor: disagrees about version of symbol module_layout
- [ 4.709878] processor: disagrees about version of symbol module_layout
- [ 4.709888] processor: disagrees about version of symbol module_layout
- [ 5.567558] EXT4-fs (sda3): re-mounted. Opts: (null)
- [ 5.876958] Adding 3999740k swap on /dev/sda2. Priority:-1 extents:1 across:3999740k SS
- [ 7.141624] usbcore: disagrees about version of symbol module_layout
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement